Built-in Gas Hob. Important - Please read these instructions fully before using. Operating Instructions -Please keep for future reference

Transcription

1 Built-in Gas Hob Operating Instructions -Please keep for future reference A70GCIS Important - Please read these instructions fully before using These instructions contain important information which will help you get the best from your appliance and help to ensure safe and correct installation, use and maintanence. If you need help or have damaged or missing parts, call the Customer Helpline:

2 Contents Customer Helpline Safety Information Installation User instructions Using the hob Cleaning and Maintenance Cleaning Maintenance Trouble Shooting Technical specifications Injector table Guarantee Product code A70GCIS 1

3 Safety Information Customer Helpline Important - Please read these instructions fully before installation Your appliance is produced in conformity with all relevant safety regulations relating to electrical appliances. Maintenance and repair work must only be performed by authorised or suitably qualif ed service technicians. Installation and repair work performed without observing the rules may be dangerous. IMPORTANT - This appliance has been designed for non-professional, domestic use only. IMPORTANT - Carefully unpack and examine the appliance for any damage. If you think there is a defect, do not use the appliance and contact the authorised repair agent on IMPORTANT - Dispose of all packaging correctly and responsibly and in accordance with all local laws and regulations. Never leave packaging components within the reach of children as they can be a source of danger. IMPORTANT - Before connecting the appliance to the household electrical supply, make sure the appliance is rated correctly for the type of electrical supply in your house by checking the information on the rating plate. IMPORTANT - Make sure your electrical isolation switch is in an easily accessible position following installation. IMPORTANT - Switches should be set to 0 when the appliance is not in operation. IMPORTANT - Do not use steam cleaners for cleaning the cooking hobs. IMPORTANT - In the event that the flexible cable is damaged contact your authorised service agent for replacement - the cable fitted to this appliance may not be replaced by an unauthorised person. WARNING - This appliance must be installed by an authorised technician prior to use. The manufacturer is not responsible for any damage that might be caused by installation not in accordance with these instructions. WARNING - Accessible parts become hot during use, young children must be kept away. IMPORTANT - Operating this appliance needs 2m /hr air per kw heat input. WARNING - This appliance is not intended for use by persons (including children) with reduced physical, sensory and mental capabilities or lack of experience and knowledge. WARNING - Children should be supervised to make sure that they do not play with the appliance. WARNING - Make sure cables of other electrical devices cannot come into contact with the hot parts of this appliance. WARNING - Protect your appliance from atmospheric effects. Do not expose to the effects of sun, rain, snow, dust etc. CAUTION - Make sure the appliance is turned off at the mains before cleaning. CAUTION - Do not keep flammable materials close to the appliance when it is in operation. CAUTION - Do not move away from the appliance while cooking with fat or oil. Flaring may occur in the case of overheating. CAUTION - The use of a gas cooking appliance results in the production of heat, moisture and products of combustion in the room in which it is installed. Ensure that the kitchen is well ventilated especially when the appliance is in use, keep natural ventilation holes open or install a mechanical ventilation device(mechanical extractor hood). CAUTION -This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating. 2

4 Installation Installation Customer Helpline Positioning CAUTION! This & appliance electrical must connection only be installed by a Gas Safe Registered Engineer. Advice for installer IMPORTANT - The appliance should be installed, regulated and adapted to function with other types of gas by a Gas Safe Registered Engineer. Failure to comply with this condition will render the guarantee invalid. IMPORTANT - The appliance must be installed in compliance with regulations in force. IMPORTANT - Installation technicians must comply to current laws in force concerning ventilation and the evacuation of exhaust gases. IMPORTANT - Always disconnect the gas supply from the appliance before carrying out any maintenance operations or repairs. IMPORTANT - The appliance must be housed in heat-resistant units. IMPORTANT - These tops are designed to be embedded into kitchen fixtures measuring 600 mm in depth. IMPORTANT - The walls of the units must not be higher than work top and must be capable of resisting temperatures of 60 C above room temperature. IMPORTANT - Do not install the appliance near inflammable materials (eg. curtains). Location IMPORTANT - The appliance may be installed in a kitchen or kitchen/diner, but not in a room or space containing a bath or a shower. IMPORTANT - The appliance must not be installed in a bed-sitting room of less than 20 m. Ventilation requirements For rooms with a volume of less than 5 m - 2 permanent ventilation of 100 mm free area will be required. For rooms with a volume of between 5 m and 10 2 m a permanent ventilation of 50 cm free area will be required unless the room has a door which opens directly the outside air in which case no permanent ventilation is required. For rooms with a volume greater than 10 m - no permanent ventilation is required. NB. Regardless of room size, all rooms containing the appliance must have direct access to the outside air via an open window or equivalent. Electrical connection IMPORTANT - Electrical connections must be carried out by a suitably qualified person and in accordance with all relevant local building and installation regulations. 1. This appliance is fitted with fused plug which should be inserted into a suitable mains socket. 2. It is recommended that the mains socket is located behind the appliance and is switched on and off via a separate switched Fused Connection Unit (FCU).. It is recommended that the switched FCU is located adjacent to the appliance within a maximum distance of 2m. The switched FCU must not be located above the appliance but should be easily accessible in case of an emergency. IMPORTANT - The appliance is designed and approved for domestic use only and should not be installed in a commercial, semi commercial or communal environment. Your product will not be guaranteed if installed in any of the above environments and could affect any third party or public liability insurances you may have.

5 User Instructions Customer Helpline Using the hob Using the gas burners Manual ignition; To ignite one of the burners, light a match, taper or another manual aid to its upper circumference and push the corresponding control knob and turn counter clock-wise. Medium regulation of the flame will be obtained by turning the control knob between maximum position (big flame) and the minimum position (small flame). The small diagrams situated on the control panel indicate which of the gas burners is in use. Electrical Ignition Through Hob Valve (microswitch): Press the hob valve you want to operate and turn the valve in a counter-clockwise direction. The microswitch placed under the knob will automatically create sparks through the spark plug of the burner. Continue pressing the knob until you see a stable flame on the burner. Recommendations: Your hob has burners of different diameters. The most economic way of using gas is too choose the correct size gas burners for your cooking pan and to bring the flame to minimum position once the boiling point is reached. It is recomended to always cover your cooking pan. In order to obtain maximum performance from the main burners, use pots with the following flat bottom diameters. Rapid Burner Medium Burner Auxillary Burner : cm : cm : cm When the burners are not in use for prolonged periods, always turn the main gas control valve off. Make sure that the tips of the flames do not spread out of the outer circumference of the pan, as this may also harm the plastic accessories around the pan (handles etc.). Flame safety device; Hobs equipped with a flame failure device provide security in case of a accidentall extingnished flame. If such a case occurs, the device will block the burners gas channels and will avoid any accumulation of unburned gas. Wait 90 seconds before re-igniting an extinguished gas burner. Necessary time period to arm the gas safety during ignition: max. seconds. Necessary time period to disarm the gas safety after the flame extinguishes: No more than 90 seconds. 1- Push the control knob and turn it counter clockwise until it reaches maximum flame position. 2- Use a it match or the electric ignition button to light the gas burner cap and maintain the control knob pressed down for max. 10 seconds. - Let the control knob go and make sure that the gas burner stays ignited. If this fails, repeat the procedure. IMPORTANT - Use only flat pans and with a sufficiently thick base.. IMPORTANT - Ensure that the base of the pan is dry before placing it on the burners.. IMPORTANT - The temperature of accesible parts may be high when the appliance is operating. So it is imperative to keep children and animals out of the reach of the burners during and after cooking.. IMPORTANT - After use, the hob remains very hot for a prolonged period of time, do not touch it and do not place any object on top of the hob. IMPORTANT - Never place knives, forks, spoons and lids on the hob as they will get hot and could cause serious burns. 4

6 Cleaning and Maintenance Customer Helpline Cleaning: Before cleaning disconnect the hob from the main gas supply. Burner Caps: Periodically, enamelled pan supports, enamelled covers, burner heads must be washed with soapy warm water, well rinsed and dried. After drying them thoroughly, replace them correctly in their placement. Enamelled Parts: In order to keep them new, it is necessary to clean them frequently with mild warm soapy water and a cloth. Do not wash them while hot and never use abrasive powders or abrasive cleaning materials. Do not leave vinegar, coffee, milk, salt, water, lemon, or tomato juice in contact with enamelled parts for long periods of time. Stainless Steel: Stainless steel parts must be cleaned frequently with mildly warm soapy water, a soft sponge and then dried with a soft cloth. Do not use abrasive powders or abrasive cleaning materials. Do not leave vinegar, coffee, milk, salt, water, lemon, or tomato juice in contact with stainless steel parts for long periods of time. Never use a steam cleaner to clean the hob. Maintenance: Periodically check the gas connection pipe. Even if any simple abnormality is felt, inform the technical service to have it changed. Call We recommend the gas connection parts to be changed once a year. If any abnormality is felt while operating the control knobs of cooker and oven, contact the authorised service. 5

7 Trouble Shooting Customer Helpline Basic troubleshooting before contacting service WARNING If you smell gas, immediately turn of the gas supply at the mains and open all windows and doors to ventilate the area. Do not operate any electrical appliances including lighting switches and wall sockets. Call your authorised gas engineer. Problem Possible cause Solution - Gas ring does not ignite. - Power is turned off. - Gas supply is turned off. - FSD has just operated. - Make sure both the electrical and gas connections are operational and that the gas tap and switches are set to the open/ on positions. - Wait for 90 seconds and re-ignite following the procedure on page 4. Gas rings have an uneven flame or flame is discoloured. - Hob assembly is misaligned. - Dirt or moisture ingress inside the ring assemblies. - Gas supply is interrupted. - Turn off and adjust the ring assemblies to make sure they are correctly seated. - Clean and dry the ring assemblies thoroughly and realign. - Call the customer helpline on or consult a qualified gas installation engineer. 6

8 Technical Specifications Customer Helpline Injector Table Gas Category : II2H+ GB Class: RAPID BURNER Injector diam.(%mm) Nominal Rating (kw) (at 15 0 C and 101mbar press) G0 0 mbar gr/h LPG G1 28-0/7 mba gr/h NG G20 20 mbar lt/h AUXILLARY BURNER Injector diam.(%mm) Nominal Rating (kw) (at 15 0 C and 101mbar press) gr/h gr/h lt/h MEDIUM BURNER Injector diam.(%mm) Nominal Rating (kw) (at 15 0 C and 101mbar press) gr/h 125 gr/h lt/h 7

9 Technical Specifications Customer Helpline Model/Item Power supply Maximum power Size(H x W x D) Cut-Out Dimensions(W x D) Net weight A70GCIS (20)V~/50 Hz 10,5 Kw 6.5x680x515 mm 560x490 mm 10 kg. We apologise for any inconvenience caused by any minor inconsistencies in these instructions, which may occur as a result of product improvemenst and development. Disposal information The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.by ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product /11 R000

10 Guarantee Product guarantee This product is guaranteed against manufacturing defects for a period of Year This product is guaranteed for twelve months from the date of original purchase. During this period, any defect that arises due to faulty materials or workmanship will be replaced, refunded or repaired free of charge where applicable by the dealer from whom the unit was purchased. The guarantee is subject to the following provisions: The guarantee does not cover accidental damage, misuse, cabinet parts, knobs or consumable items. The product must be correctly installed and operated in accordance with the instructions contained in this manual. It must be used solely for domestic purposes. The guarantee will be rendered invalided if the product is re-sold or has been damaged by inexpert repair. Specifi cations are subject to change without notice. The manufacturer disclaims any liability for incidental or consequential damages. The guarantee is in addition to, and does not diminish, your statutory or legal rights. In the event of a problem with the product within the guarantee period, please contact: Customer Helpline: Guarantor: Home Retail Group plc Avebury Boulevard Central Milton Keynes MK9 2NW