2 Zone Kit code

Transcription

1 Document n 0- ~ /08/0 FR EN IT ES PT Zone Kit code 070 EN DE For Hybrid Gas Heat Pump 8 7 Installation manual For professional installer to be kept by user for further reference Manual for installation of zone kit. heating circuit. For installation and parametering refer to the installation manual 8. Société Industrielle de Chauffage BP MERVILLE - FRANCE Material subject to changes without notice

2 Zone Kit code 070 Content Description Packing Application General data Instruction for the installer Hydraulic schematics Hydraulic connections Extension card assembly Electric connections Modem Parameters heating circuits Checking and commissioning Heating installation with Speed adjustments of the heating cicuit pump CC Spare parts Installation manual "0 - EN"

3 zone kit code 070 Description. Packing Coli : circuit kit. On reception and before starting assembly check the received goods and look for possible damage during transport.. Application heating circuits requires the installation of this kit. General data Absorbed power Max operating pressure Supply voltage Weight 7 W bar 0V - 0Hz 6 x mm, kg Servomotor: - Range: Time to open or close the valve completely : min. -way valve: - Nominal: 6x mm. - Kv type: 6. mbar mbar = 0 mmce = 00 Pa , 0, 0,6 0,7 0,8 0,9,,,,,,6,7,8,9 m /h Direct circuit (CC) Return direct circuit (CC) mbar mbar=0mmce=00pa 88 Flow (CC et CC) Return mixing circuit (CC) , Mixing circuit (CC),, m/h , 6 Settings of circulating pump CC picture - Dimensions in mm indoor unit + circuit kit ) Installation manual "0 - EN" - -

4 Zone Kit code 070 Instruction for the installer. Hydraulic schematics SDEG Pg SSu EG Cd Pg SREG CPr CAR UE CEG SR SD C VD VE PC SA VM M CC SDp SP Legend : CAR - Non-return valve C -Circulating pump ( DHW and direct circuit CC ) CC - Mixing circuit (CC) Layout 0 : heating circuits. Cd CEG Condenser Circulating pump gas burner chamber CPr Pressure sensor EG Gas burner chamber SDEG Pg SSu PC Pg - Degasser EG SREG CPr CAR CEG Cd SR SD Pg UE T CAR R SA R - Radiators SA - Room sensor mixing circuit CC (optional) SA - Room sensor direct circuit CC ( optional) SDp - Flow sensor mixing circuit SD Flow sensor C VD SDEG Flow sensor gas chamber exchanger SR Return sensor VE SREG Return sensor gas chamber exchanger PC SA SP (not supplied) VM M CC SDp SP SSu - Safety valve UE Outdoor unit VD - -way valve VE - Expansion vessel VM - -way valve mixing circuit CC - - Installation manual "0 - EN"

5 zone kit code 070. Hydraulic connections Plug moved Return direct circuit (CC) Flow mixing circuit CC) Return mixing circuit CC Flow of mixing circuit CC and direct circuit CC) Return mixing circuit (CC) Plug removed Connections have to be executed according to local regulations. Assembly of the hydraulic kit - For a circuit layout: - Respect the assembly direction of the valve: : return mixing circuit CC. B A - Set the -way valve on B - Assemble the motor on the valve. Refer to the manual supplied with the motor. When the motor rotates anti-clockwise the -way valve is opened ( i.e. increase temperature ). - and the orientation. (picture 6). - For a circuit layout: assemble the non-return valve on - (picture ). - temperature sensor with a halter on the mixing circuit Make sure to have a correct contact between sensor and tube. The contact surface must be clean of paint and rust. The halter must be tightened. 0 0 A Installation manual "0 - EN" - -

6 Zone Kit code 070. Extension card assembly Before assembly make sure that the power supply is disconnected. - To access the electric parts take off the front cover. - Fit the PCB AVS with the support on the PCB RVS.. Electric connections Electric installation has to be made with respect to local security norms ( i.e. VDE 000 or similar ). The electric connections are made only after completion of all other assembly operations. Connect as follows : - Circulating pump mixing circuit CC - -way valve - Flow sensor. - Shunt on M 6 - Power supply AVS. Connect the cable harness to the heat pump supply connector. 7 - Room sensor or room controller ( optional ). 8 - Modem. 9connect the security cut- pump (X0). Heat Pump Regulation PCB (RVS) Extension (AVS) PCB M Power supply AVS -way valve Pump Mixing circuit CC 6 M C.C L 9 N BK BN BU BN BU Overheat protection X0 X0 X Shunt M Extension card AVS X00 X X0 X X M B B 7 Ou/ Or Room sensor or room controller mixing circuit CC 8 Modem Flow sensor mixing circuit CC BK Black BN Brown BU Blue Connection Installation manual "0 - EN"

7 zone kit code Modem You can initiate the frost protection function of the heat pump through a modem. - Connect the telephone contact on connector X - Refer to heat pump manual. The activated telephone contact changes the heat pump to Frost Protection programm. According to the settings all heat demand from heating circuits and DHW are ignored. set to Frost Protection. Attention! The use of modem contact excludes the installation of a pool kit.. Parameters = On 7 = Off - Set then the parameters of the circuit CC (refer to the heat pump manual : temperature setting, heating curve)... heating circuits - 70 = On 7 = Off - Set then the parameters of the circuits CC and CC (refer to the heat pump manual : temperature setting, heating curve).6 Checking and commissioning For checking and commissioning, - Refer to the heat pump manual..6. Installation with to control combustion ( when changing gas or during maintenance ) you can start-up the gas heat generator without the heat pump( see heat pump manual, Operation of the gas heat generator). circuit. The supplied heat during this setting operation must be evacuated through the DHW circuit: draw-off hot DHW to lower the temperature of the DHW tank ( < C). The -way valve lever must be in low position ( position DHW. Activate the DHW function if required ) (picture ). For the further operation s refer to the heat pump manual point of Operation of the gas heat generator. Valve disengaged Valve closed Modem lever in low position ( DHW ) T R C 6A TEL0 Valve closed Valve disengaged Installation manual "0 - EN" - 7 -

8 Zone Kit code Speed selection of mixing circuit pump CC Direction of Do not use this zone The circulating pump adjusts the volume. Recommended for a radiator installation (especially all systems with thermostatic valves or with electric valve). The circulating pump maintains the Recommended for an installation with constant pressure drop i.e.. Blocking of the circulating pump : If the motor is blocked a start-up sequence is triggered. If the motor remains blocked it will be stopped. Cut the power supply of the circulating pump during 0 sec to unlock and to allow another start-up sequence Installation manual "0 - EN"

9 zone kit code 070 Spare parts For every spare parts order indicate: model and code, product nae and code of the part. Qty = total quantity in the device. N Code Description....Type...Qty 0997 Circulating pump Connector... plots Motor...ARA way valve Seal...6x Tube Connector..." MM T part... FFF " PCB holder Extension card...avs Cable harness... ème circuit Flow sensor Sensor harness Connector... plots Non-return valve Connector... 6 plots Connector... plots Harness Fuse...0v- 6.A T Installation manual "0 - EN" - 9 -

10 Zone Kit code Installation manual "0 - EN"

11 zone kit code 070 Installation manual "0 - EN" - -