MINI BOTTLER Re-usable glass bottler V3-205

Transcription

1 V-205 V-

2 MINI OTTLER Re-usable glass bottler V-205 ispenses chilled, still and sparkling water Substantially reduce costs of purchasing pre-bottled mineral waters Re-usable glass bottles in 425ml, 500ml, 750ml and 1 liter sizes ottles can be personalized Save the environment - eliminate regular deliveries as well as the disposal of empty bottles and packaging High performance ice bank refrigeration system capable of delivering very high volumes of chilled water at low temperatures, particularly at peak demand times Power saving option to reduce electricity Eliminate any storage issues Purpose designed bottle washing trays designed to fit most commercial dishwashers Removable tap nozzles for ease of cleaning and sanitizing Stainless steel drip tray

3 " " " 29 " 12 8 " " Minimum Space Required: Height 29 1/2 Width 0 epth Mains Supply 115V 60Hz ouble NEM 5-15 Socket Mains Water Supply Terminate 24" above the Floor E ITEM NO. PRT NUMER ESRIPTION QTY. 01 Viv ouble obra 1 02 S.S 05.2 TP Sparkling 1 0 S-S Tap 05.1 TP Still 1 04 Viv Grid 1 05 Viv Tray Water Filter NEM Pressure Reg O oor Grille 4 10 Viv ooler arbonator O2 ylinder 27" RH Trap RH LH Water Pipe LH 1 Trapped Waste Upstand Terminate 24" above the floor MTERIL: FINISH: NME TE Revision O NOT SLE RWING TITLE: VIVREU North merica V-205 'Kitchen' F This rawing is copyright and is the property of Vivreau Limited. It may not be copied or reproduced without the express permission of Vivreau Limited OPYRIGHT VIVREU LIMITE 2009 VIVREU North merica Tel WG NO. Viv rawn ate pproved TE SLE:1:50 REVISION pproved

4 4 5 6 ack of ounter " Minimum learance obra Footprint o Not ut Template for ountersunk rip Tray plus obra Hole " " 5 8 " " obra utout rip Tray utout 8" x 7 1/4" rip Tray Lip o Not ut 5 8 "Lip 8" This rawing is OPYRIGHT and is the sole property of VIVREU Limited. It shall not be copied or reproduced in any form without the written permission of VIVREU Limited opyright O 2012 O NOT SLE RWING VIVREU North merica mend Text RJ MOIFITION NME TE VIVREU North merica Tel MTERIL: WEIGHT: SYSTEM WG NO. ounter utout etails Viv (US) MO SLE RWN TE SHEET 1 OF 1

5 diameter utout This rawing is OPYRIGHT and is the sole property of VIVREU Limited. It shall not be copied or reproduced in any form without the written permission of VIVREU Limited HK' PPV' VIVREU Limited NME SIGNTURE TE SYSTEM Unit 44:Metropolitan Park: Norwich Road:Greenford: Middlesex: U6 8U. Tel MTERIL: WG NO. Twin obra 2 Viv

6 4 5 6 Standard VIVREU Grille 2" " " 4 " 8 " 11 4 " 1). Front Ventilation Showing Ventilation grilles cut in a standard door panel PLESE NOTE In all cases remove the back panel from the cabinet 11" 2" " ut-out detail for the standard 12" VIVREU grille, shown in a 2.5" (24") wide door 2). Side Ventilation Ventilation grilles cut in the side of a standard 24" cabinet. The grilles may be fitted on either side provided they ventilate into a free and unobstructed area ). ase Ventilation Ventilation grilles cut in the cabinet's base panel and base plinth. Top ventilation will also be required in either the side panels or a cut-out in the top of the door. 4). ase utout Ventilation can be made to the base of the cabinet, with the removal of a narrow section of floor, immediately behind the door and trim with roll edging strip. Typical cut-out size must not be less than 11.0" wide x 1.5" deep The cabinet may be ventilated in several different ways to prevent excessive heat build-up. the methods shown all take advantage of natural circulation by placing two grilles or cut-outs; one near the base and the other at the top of the enclosure. O This rawing is OPYRIGHT 201 and is the sole property of VIVREU Limited. It sall not be copied or reproduced in any form without the express permission of VIVREU Limited O NOT SLE RWING LL IMENSIONS IN INHES Name Modification VIVREU North merica Vivreau North merica Tel RWN/TE MTERIL: FINISH: WEIGHT: RJ TITLE: WG NO. Preferred Methods of abinet Ventilation Viv SLE:1:50 4 SHEET 1 OF 1 REVISION

7 MINI OTTLER North merica V-205 Specification Sheet V-205 Product ispensed: dvanced micro-filtered, chilled still and sparkling water pplication: For the purpose of filling Vivreau re-usable glass bottles Equipment imensions: Width 14 ¾ epth 14 ¼ Height 2 obra Tap: 19 ½ (total tap height mounted) *Maximum ounter thickness for mounting cobra tap 1 ½ *Minimum Space Required for System: Height 29 ½ Width 0 epth 24 Please note that the system is installed as an Under ounter unit. lternatively it can be installed as a ounter Top system. ountertop: (alternative option) System is installed as one unit on the countertop with the dispense taps mounted on the front. Refer to ottler V-204 specification sheet. The following services are required to be supplied by the customer and must be available prior to installation: 1 potable 1/2 cold water supply terminating in a ½ ball valve, ½ female pipe thread. (ball valve must be accessible for service and installation) *The Vivreau system incorporates back flow prevention, any additional back flow devices required by local or state code must also be supplied by the customer prior to installation. ½ Threaded all Valve Minimum water pressure 50 PSI Maximum pressure 80 PSI Minimum water flow 80 Gallons per hour

8 15amp electrical socket (L5-15) 120v/60hz (2 amps) rip Tray rain. ustomer will need to supply a properly trapped receptacle according to state and local codes. The receptacle must be large enough to accommodate a /4 O flexible pipe. O2 - (customer supplied) O2 must be available for installation. If the system is to be installed in an enclosed space or cabinet adequate ventilation must be provided. (failure to provide ventilation will affect water quality) *If connecting to a bulk or existing O2 system a O2 line terminating at a ¼ barbed shutoff valve must be available within 40 of the ottling System installation site, 100psi minimum pressure. Location of Services: (all services must be accessible for installation and service) * ¼ arbed Shutoff Please ensure all services are kept within 40 of bottling system Water shut-off valve to be located at low level. Please ensure that there is sufficient room for a 12 long fitting to be connected to the shut-off valve. Top of waste receptacle should be located a minimum of 6 below the work surface the drip pan will be installed in. *The taps must be mounted on the work surface directly above the main system. Running tap lines over will cause significant water quality issues. Insulation: Please ensure that all water pipes feeding the Vivreau System are correctly insulated to ensure that the water does not heat up within the pipes prior to entering the Vivreau system. This is essential for water quality reasons. If the system is to be installed in an enclosed space, adequate ventilation must be provided. For Indoor Use Only