Europem can supply complete Flare Systems as well as Flare Tips on their own

Size: px

Start display at page:

Download "Europem can supply complete Flare Systems as well as Flare Tips on their own"

Arnold Floyd
5 years ago
Views:

1 Flare Components

Europem can supply complete Flare Systems as well as Flare Tips on their own Notes Europem is a leading supplier of Environmental Payback Projects.

2 Europem can supply complete Flare Systems as well as Flare Tips on their own Notes Europem is a leading supplier of Environmental Payback Projects. Our Technologies and Processes transform an environmental problem into a revenue stream for our clients. Since its founda on, Europem has consistently been at the forefront of technological innova on and today we offer Best Available Technologies to provide sustainable, reliable, flexible and robust solu ons for Energy produc on using industrial effluents, waste streams and by-products Advanced mul fuel/flexifuel low NOx burners Thermal oxidisers and incinerators including redu-reox systems, High Intensity Incinerators, tailgas incinerators for SRU s, Recupera ve thermal oxidisers, Ledenox incinerators, fluidised bed and rotary kiln furnaces Heat recovery boilers and heaters including flame tube boilers, water tube boilers, thermal oil heat exchangers, bath heaters and tube and shell heat exchangers Direct fired heaters and boilers Product recovery Vapour recovery units (VRU) using adsorp on and/or condensa on technology Flare gas recovery (FGRU) Sulphur recovery units (SRU) including main reactor burner, main thermal reactor and tail gas incinerator w/wo waste heat recovery boiler Safety and environmental protec on ATEX zone 0 vapour extrac on and treatment systems Flare systems including elevated flares, air, gas or steam assisted flares, ground flares, enclosed ground flares, temperature controlled ground flares denox and flue gas cleaning systems Our team has built and commissioned over 300 installa ons in more than 35 countries worldwide. Europem maintains an Environmental, Health and Safety Management System in accordance with ISO 14001, OHSAS and VCA-p. Our quality assurance and control plan is ISO cer fied. 2 3

3 Europem s Ground Flares are suitable for thermal destruction of a wide range of waste gases Flare Components Flare Tip Models Europem can supply complete Flare Systems as well as Flare Tips on their own for replacement or upgrade and refurbishment projects. The following standard Flare Tips are available: EP-PF EP-EAS EP-IAS EP-EAS/IAS EP-AA EP-GA EP-CAA EP-HP-PF EP-HP-MAS EP-MP EP-BP Pipe Flare External Assist Steam Internal Assists Steam External/Internal Assist Steam Air Assist Gas Assist Compressed Air Assist High Pressure Pipe Flare High Pressure Mul Arm Sonic Mul Point Burn Pit 4

Europem has developed the proprietary Venturi

Flame Shield giving double protec on against flame

leading to an enhanced and more stable combus on

The VFS can be integrated into most Europem Flare

ammonia flares, hydrocarbon flares and lean waste

4 Europem has developed the proprietary Venturi Flame Shield Europem Venturi Flame Shield (VFS) Europem has developed the proprietary Venturi Flame Shield giving double protec on against flame lick. The VFS also pushes air up towards p exit, leading to an enhanced and more stable combus on process. The VFS can be integrated into most Europem Flare Tips but is par cularly suitable for H2S flares, ammonia flares, hydrocarbon flares and lean waste gas flares. Drawing of Europem s Low Noise Flare Tip 6

Water Seal Vessels, Molecular Purge Reduction Seals, Conical Purge Reduction Seals and Knock-Out Drums Ancillaries Europem can supply complete flare systems which include knock-out vessels, water

Vessels Europem supplies the upstream equipment to remove droplets from gases or provide a seal between the flare burner and the waste gas piping in order to prevent air from infiltra ng the flare

Molecular seals and also Conical seals are both devices that reduce purge gas flow rates.

This design cannot be blocked by debris, sludge or ice forma on and does not put addi onal load on the flare structure, being integral to the flare riser.

A water seal can be installed to provide a resistance to flame propaga on upstream in the waste gas piping.

5 Water Seal Vessels, Molecular Purge Reduction Seals, Conical Purge Reduction Seals and Knock-Out Drums Ancillaries Europem can supply complete flare systems which include knock-out vessels, water seals, molecular seals, conical purge gas seals, pilots and igni on systems. Vessels Europem supplies the upstream equipment to remove droplets from gases or provide a seal between the flare burner and the waste gas piping in order to prevent air from infiltra ng the flare riser and thus prevent flash back. Purge gas is employed to prevent flash back by stopping air ingress to the flare gas header. Molecular seals and also Conical seals are both devices that reduce purge gas flow rates. Conical seals will require a slightly higher purge gas flow rate than a Molecular seal, but have the advantage of a simpler more economic design. This design cannot be blocked by debris, sludge or ice forma on and does not put addi onal load on the flare structure, being integral to the flare riser. Although purge systems are the perfect solu on for flash back preven on, the flow of purge gas can always be lost. A water seal can be installed to provide a resistance to flame propaga on upstream in the waste gas piping. Vessels can be supplied either as an integral part of a flare system or as stand alone items. Both ver cal, typically integrated with the Flare riser, or horizontal configura ons are available. Features Water Seal Vessels equipped with an overflow weir to maintain a minimum water level, an -pulsa on baffles and a dip-pipe with distribu on cone forcing the waste gas to flow through the water bath A liquid level control with automa c draining prevents the vessel from overfilling Molecular Seals are equipped with a riser pipe and cap to either form a layer of purge gas on the top, when the purge gas is lighter than the air, or on the bo om when the purge gas is heavier than the air of the vessel Conical Seals are in fact an inverted conical restric on made as a sec on of the riser. This restric on will locally induce a higher waste gas velocity which in turn entrains any penetra ng air and carries it up to the flare burner Models EP-WS Water Seal Vessel EP-MPRS Molecular Purge Reduc on Seal EP-CPRS Conical Purge Reduc on Seal EP-KOD Knock-Out Drum 8

6 Europem ignition systems and pilot burners are developed for their reliable operation Igni on Systems Europem igni on systems and pilot burners have been developed for their con nuous reliable opera on in harsh environments and in all weather condi ons. High grade alloys are used and cri cal parts are mounted in protec ve housings to ensure the long life me of the equipment. Both High Energy electronic spark igni on and flame front igni on systems are offered. Flame Front Igni on (FFG) systems have been used as the workhorse of the flare industry for many years. The FFG pilot igni on line is filled with a combus ble gas/air mixture, then ignited by a spark on the igni on skid to generate a flame front travelling through the igni on line up to the Pilot burner. This flame front subsequently ignites the pilot gas and in turn the waste gas. Both manual and automa c flame front igni on systems can be offered. High Energy Electronic spark igni on uses a high energy electric arc to ignite the combus ble pilot air-gas mixture. The arc is generated at fixed intervals for a limited period of me. Pilot Burners Pilot burners can combine one or more of the igni on systems described above and with a con nuous flame to ensure that combus ble waste gas mixtures are always ignited and combusted. Europem pilot burners have the following features: High Energy Igni on to ensure reliable igni on regardless of moisture levels, dirt or atmospheric condi ons Igni on rod, spark plug and thermocouple are housed in the main pilot body for added protec on and prevent exposure to high temperatures Made from high grade stainless steel alloys Pilot burners can be supplied with Single or Duplex Thermocouples or Thermocouples plus Ionisa on detec on. Self-aspira ng venturi mixers or with forced dra air High temperature cable with pre-wired plug and socket connec ons AC or DC electronics EP-ESPI EP-FFGI EP-CIS Electronic Spark Igni on Flame Front Igni on Combined Electronic and FFG Igni on systems can be supplied with either Manual or Automa c igni on controls, or a combina on of both. For safe areas and for explosion proof areas, either onshore or offshore and with retractable or non-retractable ignitor rods. 10

Offices Belgium: France: India: UAE: Europem NV Duwijckstraat 17 B-2500 Lier Phone: +32 3 491 98 78 Email: info@euro-pem.

7 Offices Belgium: France: India: UAE: Europem NV Duwijckstraat 17 B-2500 Lier Phone: info@euro-pem.com Europem Energie et Environnement 130 Boulevard de la Liberté, Lille France Phone: europemfrance@euro-pem.com Europem India Pvt Ltd 8th Floor, A-Wing, Reliable Tech Park, Airoli, Thane-Belapur Road, MIDC Navi Mumbai , India Phone : / 22 / 23 india@euro-pem.com Europem Thermal Technologies FZCO Dubai Silicon Oasis PO Box Dubai Phone: Partners Agents Belgium, China, Egypt, France, Italy, Kazakhstan, Korea, Kuwait, Oman, Poland, Qatar, Russia, Singapore, Spain, Sweden, Saudi Arabia, The Netherlands, Turkey, UAE. We reserve the right to implement technical modifications without prior notice

The advantages of closed heating systems. White paper

The advantages of closed heating systems White paper Flamco B.V. December 2016 Closed versus open Heating Systems Heating and cooling installation use water for the energy transfer because it s the most