FWV 04 FWL 05 FWM 06 FWB 07 FWD 08. Control 09. Accessories 10. Daikin Europe N.V.

Transcription

1

2 Daikin has a worldwide reputation based on over 80 years experience in the successful manufacture of high quality air conditioning equipment for industrial, commercial and residential use. Daikin Europe N.V. Fan Coil Units are a highly efficient means of turning a water chiller or hot water boiler into an efficient, quiet air conditioning system. These units are an effective solution to provide a comfortable environment for both commercial and residential applications. DAIKIN offers a wide range of Fan Coil Units for both concealed and exposed applications. 3models are available in flexible application. The only moving part in the units is the fan, which making them ideal for use in offices, hotels and at home. The goal is to obtain the right solution, both technically and aesthetically. Fan Coil Units in combination with chillers and or boilers can be used to provide a broad range of solutions that can be tailored to local conditions such as climate, primary fuel market or building insulation. In warmer climates or when a building is well insulated, Fan Coil Units with only a chiller (2-pipe system) can handle both and. Here the chiller is capable of operating in as well as heat pump mode. In more severe climates, a boiler can be added (4-pipe system) allowing optimal in the summer using the chiller, and efficient in the winter via the boiler. Adding to the flexibility when designing applied systems applications, is the ability to equip the Fan Coil Unit with an optional electric heater. In situations where it is not economical to operate a boiler and where a chiller in heat pump mode is also not desirable, the electric heater can quickly heat up a room. The combinations made possible by the Daikin range of Fan Coil Units allow a chiller-based solution to be optimally designed for just about any application and price range. FWV FWL 05 FWM FWB 07 FWD Control 09 Accessories

3 Reference kW FWV 2-pipe 4-pipe FWL 2-pipe 4-pipe FWM 2-pipe 4-pipe FWB 2-pipe 4-pipe FWD 2-pipe 4-pipe

4 Quick fixing system for wall mounting Pre-assembled 3-way/4-port ON/OFF valves are available Valve packages are insulated, no extra drain pan required Valve packages contain balancing valves and sensor pocket Fast-on connections for electrical options Quick removal of washable filter Electrical heater : no relay up to 2kW capacity Electrical heater : equipped with two overheat cut-out thermostats FWV01-C* 2-pipe (*=TN or TV) 4-pipe (*=FN or FV) W kw kw kw kw Dimensions H xw x D mm kg dba Cooling kpa Heating kpa Fan Air flow rate Water connections Water flow Cooling Heating Coil l Maximum absorbed current W

5 Quick fixing system for wall/ceiling mounting Pre-assembled 3-way/4-port ON/OFF valves are available Valve packages are insulated, no extra drain pan required Valve packages contain balancing valves and sensor pocket Fast-on connections for electrical options Quick removal of washable filter Electrical heater : no relay up to 2kW capacity Electrical heater : equipped with two overheat cut-out thermostats FWL01-C* 2-pipe (*=TN or TV) 4-pipe (*=FN or FV) W kw kw kw kw Dimensions H xw x D mm kg dba Cooling kpa Heating kpa Fan Air flow rate Water connections Water flow Cooling Heating Coil l Maximum absorbed current W

6 Quick fixing system for wall/ceiling mounting Pre-assembled 3-way/4-port ON/OFF valves are available Valve packages are insulated, no extra drain pan required Valve packages contain balancing valves and sensor pocket Fast-on connections for electrical options Quick removal of washable filter Electrical heater : no relay up to 2kW capacity Electrical heater : equipped with two overheat cut-out thermostats FWM01-C* 2-pipe (*=TN or TV) 4-pipe (*=FN or FV) Power input W Total capacity kw Cooling capacity Sensible capacity kw Capacity Heating capacity (2-pipe) kw Heating capacity (4-pipe) kw Dimensions H xw x D mm 535x584x x794x xx x1214x x584x x794x xx x1214x249 Machine weight kg Sound level Sound power dba Cooling kpa Water pressure drop Heating kpa Fan Air flow rate m³/h Water connections Std. heat exchanger inch 1/2 3/4 1/2 3/4 Required power supply V / f / Hz 230/1/50 Cooling l/h ,154 1, ,142 1,355 Water flow Heating l/h ,154 1, Coil Water volume l Maximum absorbed current W * : TN (2-pipe, without valves) - TV (2-pipe, with ON/OFF 3-way valves) - FN (4-pipe, without valves) - FV (4-pipe, with ON/OFF 3-way valves)

7 ECFWER6 FWBAAT Height of the units only 240mm for all the sizes 3, 4 or 6 stage row coil Drain pan to collect the condensate from: heat exchanger and regulating valves 7-speed electrical motors (with thermal protection on windings) All 7 speeds pre-wired in the factory in the terminal block of the switch box Standard air filter : removable from the bottom concealed ceiling unit FWB 07 FWB02-AT 2-pipe Power input W Total capacity kw Cooling capacity Sensible capacity kw Capacity Heating capacity (2-pipe) kw Heating capacity (4-pipe)* kw Dimensions H xw x D mm 239x39x x1389x x1739x609 Machine weight kg Sound level Sound power dba Water pressure drop Cooling kpa Heating kpa Fan Air flow rateww m³/h Available pressure Pa Water connections Std. heat exchanger inch 3/4 Required power supply V / f / Hz 230/1/50 Water flow Cooling l/h ,111 1,299 1,488 1,774 Heating l/h ,123 Maximum absorbed current W * : 4-pipe = 2-pipe + option Additional heat exchanger

8 Quick fixing system for wall/ceiling mounting Straight duct connector is mounted to discharge side Standard air filter : removable from the bottom FWD-18A* 2-pipe (*=T) 4-pipe (*F) Power input W Total capacity kw Cooling capacity Sensible capacity kw Capacity Heating capacity (2-pipe) kw Heating capacity (4-pipe) kw Dimensions H xw x D mm x754 x559 x964 x559 x1174 x559 x1174 x x1384 x718 x754x 559 x964 x559 x1174 x x1174 x x1384 x718 Machine weight kg Sound level Sound power dba Water pressure drop Cooling kpa Heating kpa Fan Air flow rate m³/h Available pressure Pa Water connections Std. heat exchanger inch 3/4 1 3/4 1 Required power supply V / f / Hz 230/1/50 Water flow Cooling l/h 674 1,4 1,339 1,514 2,056 2,833 3, ,4 1,339 1,514 2,056 2,833 3,140 Heating l/h 674 1,4 1,339 1,514 2,056 2,833 3, ,392 1,856 * : T(2-pipe) - F(4-pipe)

9 CONTROL The fan coil units can be operated by different controllers according to the model. Electronic built-in controller: ECFWEB6 & Electronic remote controller: ECFWER6 Operating mode: automatic or at fixed speed Setting: to turn the fan coil unit ON/OFF Controlling the electric Cooling/ selector Thermostat to control the room temperature Operational LEDs that indicate the current operating mode Voltage free contacts, allowing to switch the unit ON/OFF Voltage free contacts for centralized / changeover Water temperature probe Air temperature probe Electromechanical built-in controller: ECFWMB6 Fan speed selector Manual / changeover. ON/OFF valves can also be controlled with ECFWMB6. Master/Slave interface: EPIMSA6 Available as an additional interface, which is required for units with a current greater than 1.12A. Optional for remote control of up to 4 fan coil units Up to 3 Master/Slave interfaces can be connected in parallel, enabling control over up to 12 fan coil units. Power interface: EPIA6 Available as an additional interface, which is required for units with a current greater than 1.12A. Required for connection of ECFWER6 to FWD Can be used as an alternative for Master/Slave interface. 09

10 Type: FWM, FWL, FWV Description FWV FWL FWM x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Type: FWB-A Description Electric Heater Power interface

11 Type: FWD Description Power interface

12 Air conditioning systems provide a significant level of indoor comfort, making possible optimum working and living conditions in the most extreme climates. In recent years, motivated by a global awareness of the need to reduce the burdens on the environment, some manufacturers including Daikin have invested enormous efforts in limiting the negative effects associated with the production and the operation of air conditioners. Hence, models with energy saving features and improved eco-production techniques have seen the light of day, making a significant contribution to limiting the impact on the environment. Daikin s unique position as a manufacturer of air conditioning equipment, compressors and refrigerants has led to its close involvement in environmental issues. For several years Daikin has had the intention to become a leader in the provision of products that have limited impact on the environment. This challenge demands the eco design and development of a wide range of products and an energy management system, resulting in energy conservation and a reduction of waste. Naamloze Vennootschap Zandvoordestraat 300 B-8400 Oostende, Belgium BTW: BE RPR Oostende Daikin Europe N.V. is approved by LRQA for its Quality Management System in accordance with the ISO9001 standard. ISO9001 pertains to quality assurance regarding design, development, manufacturing as well as to services related to the product. ISO14001 assures an effective environmental management system in order to help protect human health and the environment from the potential impact of our activities, products and services and to assist in maintaining and improving the quality of the environment. Daikin units comply with the European regulations that guarantee the safety of the product. Daikin Europe N.V. participates in the Eurovent Certification Programme for Air Conditioners (AC). Liquid Chilling Packages (LCP) and Fan Coil Units (FC); the certified data of certified models are listed in the Eurovent Directory. Certification is valid for air cooled models <600kW and water cooled models <1500kW. The present leaflet is drawn up by way of information only and does not constitute an offer binding upon Daikin Europe N.V.. Daikin Europe N.V. has compiled the content of this leaflet to the best of its knowledge. No express or implied warranty is given for the completeness, accuracy, reliability or fitness for particular purpose of its content and the products and services presented therein. Specifications are subject to change without prior notice. Daikin Europe N.V. explicitly rejects any liability for any direct or indirect damage, in the broadest sense, arising from or related to the use and/or interpretation of this leaflet. All content is copyrighted by Daikin Europe N.V. Daikin products are distributed by: Copyright Daikin Printed on non-chlorinated paper. Prepared by La Movida. Belgium Responsible Editor: Daikin Europe N.V.. Zandvoordestraat 300. B-8400 Oostende