POWER GLGS-1200 MOWER THE GUIDE AFTER SALES SUPPORT MODEL NUMBER: GLGS-1200/250

Transcription

1 GLGS-1200 MOWER ROTARY LAWN MOWER & GRASS TRIMMER SET 2-Point safety switch 1 x 10 m Detachable rubber cable with BS plug & VDE socket 3 Grass cutting heights Now you have purchased a Gardenline product you can rest assured in the knowledge that as well as your 3 year parts and labour warranty you have the added peace of mind of dedicated helplines and web support. AFTER SALES SUPPORT UK / N.IRELAND HELPLINE NO REP. IRELAND HELPLINE NO WEB SUPPORT ART. NO. LMM6003 MODEL NUMBER: GLGS-1200/250 THE POWER GUIDE

2 Contents 03 Introduction 04 General information 05 Safety instructions 12 Assembly instructions & Parts List 17 Operation instructions 20 Other useful information 21 Warranty card 22 Notes Model Number: GLGS

3 Introduction 1 Congratulations on choosing to buy a GARDENLINE product. By doing so you now have the assurance and peace of mind that comes with purchasing a product made by one of Europe s leading manufacturers. All products brought to you by Gardenline are manufactured to the highest standards of performances and safety, and, as part of our philosophy for customer service and satisfaction, are backed by our comprehensive 3 Year Warranty. We hope you will enjoy using your purchase for many years to come. Model Number: GLGS

4 General information 2 Rotary Lawn Mower Always read the instructions for electrical products carefully before use. It will help you understand your product better and avoid unnecessary risks. Keep this instruction manual in a safe place for future use. This electric lawn mower is intended for cutting grass, i.e. for the maintenance of lawns. Model Number: GLGS

5 Safety instructions 3 Explanation of symbols Read the instructions carefully. Conformity with the relevant EU safety directives. Class II machine - double insulation - earth connection not required. Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of the instructions in this manual. Indicates electrical shock hazard. Remove the plug from the mains socket Do not use in rain or wet weather Always wear safety glasses, hearing protection, safety shoes and heavy-duty work clothing! The rotating cutter blade will not stop immediately the machine is switched off. Keep your body clear of sharp parts. Keep at a safe distance. Defective and/or scrapped electrical or electronic tools should be handed in to a recognized collection point for reprocessing. Model Number: GLGS

6 General safety instruction Warning! Read all instructions. Failure to follow all instruc tions listed below may result in electric shock, fire and/or serious injury. The term power tool in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. Save these instructions. 1) Work area a. Keep work area clean and well lit. Cluttered and dark areas invite accidents. b. Do not operate power tools in explosive atmos pheres, such as in the presence of flam mable liquids, gasses or dust. Power tools cre ate sparks which may ignite the dust of fumes. c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) Electrical safety a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs which earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of elec tric shock if your body is earthed or grounded. c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use redu ces the risk of electric shock. Always use tool in con junction with a residual circuit breaker device. Model Number: GLGS

7 3) Personal safety a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medica tion. A moment of inattention while opera ting power tools may result in serious personal injury. b. Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c. Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e. Do not overreach. Keep proper footing and balance at all times. This enables better con trol of the power tool in unexpected situations. f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewel lery or long hair can be caught in moving parts. g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards. h. Use clamps or a vice to hold work. It s safer than using your hand and it frees both hands to operate tool. 4) Power tool use and care a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Model Number: GLGS

8 d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalign ment or binding of moving parts, breakage of parts and any other condition that may affect the po wer tools operation. If dama ged, have the po wer tool repaired before use. Many acci dents are caused by poorly maintained power tools. f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in hazardous situation. h. Damaged switches must be replaced at a cus to mer service repair centre. Do not use power tools that cannot be switched on and off. i. Do not leave power tools unattended while they are switched on. Always switch off the tool and wait until it has come to a full standstill before leaving. j. If the mains cable has been damaged, it must be replaced with a special mains cable. These can be obtained from the manufacturer or the manufacturer s custo mer service department. The mains cable may only be replaced by the manufacturer, the manufacturer s customer service department or equally qualified persons. 5) Service a. Please use a qualified expert who uses original replacement parts to repair your power tool. This will ensure proper functioning of the power tool. b. Caution! The use of any accessories or additional tools other than those recommended in this manual may lead to an increased risk of injury. Only use original replacement parts. Model Number: GLGS

9 Special safety precautions Warning! When using electric equipment due heed must always be paid to the local prevailing safety precautions so as to minimize the risk of electric shock, injury or fire. Read the following safety instructions and the enclosed safety precautions thoroughly before using the machine, and save them for future reference! Make sure that the machine is assembled correctly before using it. Never move the machine by pulling on the plug. Always remove the plug from the socket before picking up the machine. Always switch off the machine before removing the plug from the socket. Always keep children and animals at a distance. Make sure anyone in the area remains at a safe distance when the machine is in operation. The operator is responsible for the safety of third parties whilst using this machine. Do not allow persons unfamiliar with the instructions, children, or persons under the influence of alcohol, drugs or other substances to use the machine. Use the machine solely for the purpose for which it is intended. Use this machine solely when the grass box is fitted or the safety flap is closed. Switch off the motor and wait until the cutter blade has stopped turning before fitting or removing the grass box. Make sure that all guards are fitted correctly, and that they are in good condition. The cutting blades must be able to turn freely before switching on the machine. Keep your body clear of the turning parts. Keep a safe distance when using the machine. Lay the power cord on the ground where it will be safe. Make sure you adopt a correct working posture, especially on slopes. Always use the machine at walking speed. Warning! The cutter blade will not stop turning immediately the machine is switched off. Model Number: GLGS

10 Switch off the machine, remove the plug from the socket and wait until the cutter blade has stopped turning before cleaning the machine or carrying out maintenance. Take care when cleaning or maintaining the machine. Take care not to cut your fingers, and wear protective gloves! Do not move or alter any of the electrical or mechanical safeguards. Use the machine solely when there is sufficient daylight or artificial light. Wear suitable work clothing and sturdy shoes. Make sure that the area where the lawnmower is to be used is clean. Whilst you are using the lawnmower also check for any objects that could damage the machine. If an object nevertheless comes into contact with the machine, then stop and check whether the machine is damaged. Have any damage repaired before you use the machine again. Switch off the machine immediately if it suddenly begins to vibrate. Inspect the machine to determine the cause. Check the machine thoroughly before use. Only use the machine when it is in good condition. Do not use the machine if you observe a defect; have it repaired before you use it again. Replace any worn or damaged parts. Always use original (spare) parts. Electricity Before inserting the plug in the socket verify that the information on the socket is correct, and that it is in agreement with the information indicated on the machine. When the use of a residual current circuit breaker is mandatory verify that the circuit breaker that is used will trip with a residual current of 30 ma. Consult an electrician. Never run the machine over the power cord. Make sure that you always know where the power cord is lying on the ground. Use the special cable-holder to connect the plug to the extension cable. Never use the machine in the rain, or on wet or damp grass. Never leave the machine outdoors. Check that the power cord is in good condition before you use the machine. Model Number: GLGS

11 Do not use the machine if the power cord is damaged; have it replaced by a recognized service centre. Always use an extension cable suitable for outdoor use. The extension cable s socket must be splashproof in accordance with the DIN and VDE 0282 standards; the cable must have cores with a cross-sectional area of at least 1.0 mm 2 (maximum length: 75 m). Use a suitable H05VV-F 1.0 mm 2 cable. Model Number: GLGS

12 Assembly & Parts list 4 Product information Upper handle Lower handle ON/OFF switch Grass collection box Wheels Motor cover Cable handle Model Number: GLGS

13 Model Number: GLGS d

14 Model Number: GLGS

15 Assembly of the lawnmower See Fig. 1 Adjusting the cutting height Switch off the machine, remove the plug from the socket and wait until the cutter blade has stopped turning before adjusting the cutting height. The cutting height can be set to 3 different positions: 25 mm, 40mm and 55mm. To adjust the front wheel cutting height; Turn the mower upside down. Pull the wheel axle towards the front of the mower. Insert the wheel axle into the desired cutting height position. Make sure both right and left wheel are in the same cutting height position. To adjust the rear wheel cutting height; Turn the mower upside down. Pull the wheel axle towards the mower s catcher flap. Insert the wheel axle into the desired cutting height position. Make sure both right and left wheel are in the same cutting height position. Cable-holder Fig. 3 Insert the extension cable s socket in the machine s switch/plug connection, and secure with the cable-holder. The loop in the cable must be long enough to allow the cable to slide in the cable-holder from one side to the other. Model Number: GLGS

16 On/off switch Fig. 4 Warning! Do not start the machine in very long grass. Press safety button A on the switch/plug connection, and then squeeze lever B against the machine s handle. Hold the lever against the handle and release the safety button. To stop the machine, release the lever. The lever will automatically return to the neutral position. Spare Parts List No. Description Position Wheel complete 25TILL Front axle Rear axle Blade Screw for blade Wrench 38 Model Number: GLGS

17 Operation instructions 5 Mowing tips Make sure that the area you plan to mow is free of stones, rubbish, cables, and other objects. Make sure than all fastenings (screws, nuts, etc.) are tight. Regularly check the grass box for wear. Select the cutting height according to the condition of your lawn and the height of the grass. For best results, mow tall grass in layers. The recommended height of the grass cut each time is a maximum of 4 centimetres. Mowing the grass when it is dry will achieve the best result. Make sure that the cutting blades can turn at full speed; the machine may not be overloaded. To protect the power cord, make sure that it is lying on the ground behind you as you mow (Fig. 6). Start mowing slowly by slowly pushing the machine forwards. If the cutting blades slow down or the motor stops then you have selected the incorrect cutting height, or you are pushing the lawnmower too quickly. Empty the grass box immediately it is full; failure to do so may cause the cutter blade to seize, or overload the motor. The cutting blades Fig. 5 A worn cutter blade will result in a poor cut, and will overload the motor. Always check the cutter blade before you start using the machine. Have the cutter blade sharpened or replaced by a specialist when so required. Warning! Remove the plug from the socket, and wear protective gloves. Model Number: GLGS

18 To remove the cutter blade (C) hold it tight to prevent it turning whilst unscrewing bolt (B) with the spanner (A) supplied with the machine. Remove the cutter blade, and replace it with a new one. Remove the plug from the socket before starting maintenance work! Maintenance and cleaning Regularly cleaning and maintaining the machine will improve its performance and prolong its useful life. Each time you have finished mowing, clean any grass and soil from the fan, cutter blade, housing, and grass box. Use only a damp cloth (hot water) and a soft brush to clean the machine. Make sure the machine always stays dry! Never use cleaning agents or solvents. These could cause irreparable damage to your machine. Chemicals can attack plastic parts. Applying an environmentally-friendly oil to the cutter blade will protect it from rust when the machine is not used for a longer period. Store the machine in a dry place, and out of the reach of children. The upper section of the handle can be folded up to save space. Do not pinch the cord when turning the machine! Lubrication The machine does not need any extra lubrication. Faults Should a fault occur, e.g. after wear of a part, please contact the service address on the warranty card. In the back of this manual you find an exploded view showing the parts that can be ordered. Model Number: GLGS

19 Environment To prevent damage during transport, the appliance is delivered in a solid packaging which consists largely of reusable material. Therefore please make use of options for recycling the packaging. Faulty and/or discarded electrical or electronic apparatus have to be collected at the appropriate recycling locations. Model Number: GLGS

20 Other useful information 6 Package contents 1 Machine housing 4 Wheels 1 Handle (3 sections) 1 Grass box (2 sections) 1 Cable cleat 1 Safety precautions 1 User s manual 1 Guarantee card Check the machine, loose parts and accessories for transport damage. Technical specifications Voltage Input power No-load speed Cutting width Cutting height Grass collection capacity Lpa (sound pressure level) Outdoor noise 230V~, 50Hz 1200 W 3000/min 320 mm 25/40/55 mm 35 litres 67.6 db(a) 91.0 db(a) Model Number: GLGS

21 Warranty Card 7 EC DECLARATION OF CONFORMITY We Ferm B.V. Lingenstraat 6, 8028 PM Zwolle, The Netherlands declare that the design and construction of the following machine, in the form supplied by us, comply with the requirements of the appropriate EC directives. Product Description: Lawn mower. Model: GLGS-1200 In confirmity with the following standards or standardization documents: EN , EN , EN , EN , EN , EN , EN836, EN According to the provision of the directives: 98/37/EC, 2004/108/EC, 2006/95/EC, 2000/14/EC, 2002/95/EC, 2002/96/EC Measured sound power level; Lwa = db(a) Guaranteed sound power level; Lwa = 91 db(a) 2000/14/EC: The guaranteed sound power level Lwa is lower than 94 db(a). Conformity assessment procedure according to Annex VI. Notified body: TUV product service GmbH Notified body identifications number: J.A. Bakker - van Ingen CEO Ferm B.V. J.F.J. Strikkers Senior Quality Manager Ferm B.V 04/2009 WARRANTY CERTIFICATE Year of manufacture: 04/2009 LAWN MOWER GLGS-1200 Congratulations! You have made an excellent choice with the purchase of this Quality product. Our commitment to quality also includes our service. Should you, contrary to expectations, experience defects due to material or manufacturing faults during private use within 36 months of the date of purchase we shall be liable for warranty in accordance with statutory warranty regulations, provided that: - The device was not put to any use other than the intended.- Was not overloaded. - Was not used with the wrong accessories. - Repairs where not carried out by any other than the authorised workshop. The warranty certificate is only valid in connection with the receipt. Please keep both in a safe place. The warranty does not affect your statutory rights. The product is guaranteed for a period of three years beginning on the day of purchase. Keep your purchase receipt safe as proof of the date of purchase. The guarantee period can only be extended for the duration of any repair required. During the warranty period if the item becomes defective, in the first instance, please call the helpline. We will, at our discretion either repair or exchange the device in accordance with warranty legislation. Please include the following when sending in your product for repair: 1. The receipt (proof of purchase) 2. This warranty certificate with your name, address, contact details and a fault description completed overleaf. If the original receipt is not enclosed the repair will be charged for in all cases. After the warranty has expired you can still send defective devices for repairs FREIGHT PREPAID to the address at the end of this booklet. Quotes as well as repairs after warranty period are to be paid for in all cases. Ensure the product is sent well packed as no responsibility can be accepted for items lost or damaged in transit. This warranty does not affect your statutory rights. Model Number: GLGS

22 Notes Model Number: GLGS

23 Notes Model Number: GLGS

24 Model Number: GLGS-1200 GB/IRE