SPECIFICATIONS MODEL NO. OZDE1015WA
|
|
- Camron Griffith
- 5 years ago
- Views:
Transcription
1
2 SPECIFICATIONS MODEL NO. OZDE1015WA Motor size: Input: No load speed: Exhaust connection: Hose length: Suction capacity: Dust collection drum: Noise level: Tool Weight: 1100W V ~ 50Hz 20,000 /min ø100mm 2,000mm 108 cfm 50L 85 db (A) 9kg Features: Large Carry Handle Flexible Hose 100mm (4") 108 cfm Suction Capacity 0.5 Micron Filtration Efficiency 50 Litre Metal Dust Collection Drum This Dust Extractor has been designed to comply with the following Australian/New Zealand Standards and any other applicable standards referenced therein: AS/NZS : Household and similar electrical appliances - Safety Part 1: General Requirements AS/NZS Particular requirements for wet & dry vacuum cleaners Motor housing 2. Locking strap 3. Hose clamps 4. Flexible hose 5. Hose coupling 6. Dust collection drum 7. Cordset 8. On/Off switch 9. Carry Handle 10. Hose adaptors x Cartridge Filter 12. Filter Bag
3 TABLE OF CONTENTS SPECIFICATIONS Page 2 TABLE OF CONTENTS.. Page 3 INTRODUCTION... Page 4 SAFETY INSTRUCTIONS.. Page 4 ASSEMBLY.. Page 8 OPERATION.. Page 9 MAINTENANCE... Page 10 CONTENTS... Page 11 WARRANTY Page 12 3
4 INTRODUCTION Congratulations on purchasing an Ozito Dust Extractor. We aim to provide quality tools at an affordable price. We hope you will enjoy using this tool for many years. Your Ozito Dust Extractor OZDE1015WA has been designed for collecting dust and wood shavings generated by cutting and drilling timber. It is intended for DIY use only. SAFETY INSTRUCTIONS! Warning! When using mains-powered equipment, basic safety precautions, including the following, should always be followed to reduce risk of fire, electric shock, personal injury and material damage. Read and understand the manual prior to operating this tool. Save these instructions and other documents supplied with this tool for future reference. ELECTRICAL SAFETY The electric motor has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard. Using an Extension Lead Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and/or electric shock. It is recommended that the extension lead is a maximum of 25m in length. Do Not use multiple extension leads. 4
5 GENERAL SAFETY INSTRUCTIONS! Warning! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term Power Tool in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. SAVE THESE INSTRUCTIONS 1) WORK AREA a) Keep work area clean and well lit. Cluttered and dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) ELECTRICAL SAFETY a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e) Regularly examine the supply cord for damage such as cracking or ageing. If damage is found, replace the cord before further use. f) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. g) Recommendation for the use of a residual current device with a rated residual current device of 30mA or less. 3) PERSONAL SAFETY a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b) Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. 5
6 GENERAL SAFETY INSTRUCTIONS (cont.) 6 e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards. 4) POWER TOOL USE AND CARE a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that can not be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools, unplugged & out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation. h) This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. i) Children should be supervised to ensure that they do not play with the appliance. 5) SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. b) If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
7 ADDITIONAL SAFETY RULES FOR DUST EXTRACTOR! Warning! For your own safety, do not try to use your dust extractor or plug it in until it is completely assembled and installed according to the instructions and until you have read and understood the following: Never pick up metal, glass or water. CAUTION: This dust extractor is not suitable for picking up hazardous dust. When wood dust and wood shavings are confined to an area, the possibility of an explosion exists. Be aware of the existence of possible sources of ignition and take steps to minimise these. Do not pick up any material that is burning or smouldering such as metal grinding dust, cigarette ends, matches, etc. Never try to move the dust extractor by the cordset. Never use the dust extractor without the cartridge filter assembled. Always switch the machine off before changing filters and emptying the dust collection drum. Regularly inspect the filters for damage. Replace damaged filters. Regularly check that the filter cartridge and filter bag are properly sealed and fitted. Regularly check that the motor housing is secured to the dust collection drum by the locking strap. Always wear personal protection equipment such as a dust mask, safety glasses and ear muffs. When emptying filter bag or dust collection drum, be careful not to inhale dust. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. If the supply cord is damaged, it must be replaced by an electrician or power tool repairer in order to avoid a hazard. Only replace the supply cord with an approved type. CAUTION: This appliance is for dry use only and is not to be used or stored outdoors in wet or damp conditions. 7
8 ASSEMBLY For packaging reasons your machine is not entirely assembled. Remove packaging. Release the locking strap (2) and remove the motor housing (1).! Warning! During assembly ensure the tool is disconnected from the power supply. In the dust collection drum (6) you will find all the parts required to assemble the dust extractor. (Fig.1) Remove the contents and ensure that all the parts are there. a Cartridge filter b Filter bag c Flexible hose d 2 x hose clamps e Hose coupling ø 100mm f Hose adaptor x 4 d f c e b a Fig. 1 Insert the cartridge filter (a) into the filter bag (b). (Fig.2) a b Fig. 2 Push any overhang of the filter bag (b) into the cartridge filter (a). (Fig.3) Fig. 3 Push the cartridge filter (a) with the filter bag (b) onto the motor housing.(fig.4) Place the entire motor housing assembly on the dust collection drum (6) and secure with the locking strap (2). Fig. 4 8
9 ASSEMBLY (cont.) Mount the flexible hose (4) and hose clamps with the 4 screws supplied. (Fig.5) Ensure that the flexible hose (4) is flush with the hose coupling (5) of the dust collection drum (6) before tightening the hose clamp (3). Fig. 5 Attach the other end of the flexible hose (4) using a hose clamp (3) and hose coupling (5) at the end of the flexible hose (4). (Fig.6) Fig. 6 OPERATION 1. Assemble the dust extractor as described under "Assembly". 2. Select the hose adaptor to suit the dust extraction adaptor on the power tool to be used. 3. Ensure that the dust extraction adaptor on the power tool connects securely to the flexible hose (4) of the dust extractor. Use one of the hose adaptors (10) if required. 4. Connect the cordset (7) of the dust extractor to a power supply. 5. Depress the On/Off switch (8) of the dust extractor to the "1" position. 6. Operate the power tool in the normal way. 7. When the job is complete, depress the On/Off switch (8) of the dust extractor to the "0" position. 9
10 MAINTENANCE 1. Ensure that the power is disconnected from the tool and the plug is removed from the power socket prior to any cleaning or maintenance being carried out and when replacing faulty parts. 2. Keep the motor housing (1) clean of dust and dirt. 3. Remove dust and dirt from the tool regularly with a soft cloth, brush or compressed air. 4. Use a mild detergent and a soft cloth to clean plastic parts. 5. If the cordset (7) is damaged, have it replaced by an electrician or a power tool repairer. 6. Regularly check that all bolts, screws and nuts are securely fixed as these could work loose during normal operation. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person or by mishandling of the tool. DESCRIPTION OF SYMBOLS V Volts Hz Hertz ~ Alternating current W Watts /min Revolutions or reciprocation per minute no No load speed Hp Horse power Regulator compliance mark ø Diameter cfm Cubic feet per minute db Decibel Rating Read the instruction manual for fitting instructions. Do not pick up any burning or smoldering material like matches. Do not pick up any burning or smoldering material like cigarette ends. Do not pick up any glass. Warning Do not pick up any water. Always wear personal protection such as a dust mask, safety glasses and ear muffs. Do not expose to rain or use in damp conditions. 10
11 CARING FOR THE ENVIRONMENT Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way. Please recycle where facilities exist. Check with your local council authority for recycling advice. Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled material decreases pollution in the environment. Please recycle packaging where facilities exist. Check with your local council authority for recycling advice. CONTENTS 1 x Dust Extractor OZDE1015WA 1 x Cartridge filter 1 x Flexible hose 3 x Filter bags 4 x Hose adaptors 1 x Operation manual OZITO INDUSTRIES PTY LTD AUSTRALIA (Head Office) 1-23 Letcon Drive, Bangholme Victoria, Australia, 3175 Telephone: Facsimile: Website: enquiries@ozito.com.au 11
12 WARRANTY YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE: `Australia New Zealand TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE. The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law. Our goods come with guarantees that cannot be excluded at law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Generally you will be responsible for all costs associated with a claim under this warranty, however, where you have suffered any additional direct loss as a result of a defective product you may be able to claim such expenses by contacting our customer service helpline above. 3 YEAR REPLACEMENT WARRANTY Your product is guaranteed for a period of 36 months from the original date of purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it will be replaced in accordance with the terms of this warranty. Warranty excludes consumable parts, for example: filters, washers, sponge. WARNING The following actions will result in the warranty being void. Professional, Industrial or high frequency use. If the tool has been operated on a supply voltage other than that specified on the tool. If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations. Failure to perform maintenance as set out within the instruction manual. If the tool is disassembled or tampered with in any way. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175 OW5
DUST EXTRACTOR INSTRUCTION MANUAL. 550W (3/4 HP) INDUCTION MOTOR 1850W AUTOMATIC POWER OUTLET 65L COLLECTION BAG ø100mm X 2.
KNOW YOUR PRODUCT DUST EXTRACTOR 550W (3/4 HP) INDUCTION MOTOR 1850W AUTOMATIC POWER OUTLET 65L COLLECTION BAG ø100mm X 2.5M SUCTION HOSE INSTRUCTION MANUAL WARNING: Read all safety warnings and all instructions.
More informationElectric Blower Watt OZBL1800WA. To view the full range visit: Operation Manual 2 Year Replacement Warranty
Electric Blower 1800 Watt Operation Manual 2 Year Replacement Warranty OZBL1800WA 0212 To view the full range visit: www.ozito.com.au SPECIFICATIONS - MODEL NO. OZBL1800WA Motor: Input: No load speed:
More informationELECTRIC CHARCOAL STARTER
WHAT S IN THE BOX ELECTRIC CHARCOAL STARTER 2000W INSTRUCTION MANUAL SPECIFICATIONS Power: 2000W Input: 230V~50Hz Temperature: 600 C Weight: 0.9kg ozito.com.au Electric Charcoal Starter CFS-2000 WARRANTY
More informationELECTRIC AIR PUMP 130W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX. Electric Air Pump. 3 x Inflation Adaptors
WHAT S IN THE BOX ELECTRIC AIR PUMP 130W INSTRUCTION MANUAL SPECIFICATIONS Voltage: 220-240V ~50Hz Power: 130W Max. Current: 0.62A Max. Pressure: 0.6PSI Flow Rate: 440L/Min Inflation Time: Under 2min (double
More informationCORDLESS HAND VACUUM INSTRUCTION MANUAL
WHAT S IN THE BOX Cordless Vacuum CORDLESS HAND VACUUM INSTRUCTION MANUAL Brush Tool SPECIFICATIONS Input: Air Flow: Dust Canister Capacity: Weight: ozito.com.au 18V 8 L/sec 540ml 0.85kg Crevice Tool Mounting
More informationWET & DRY VACUUM 1500W 30L WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au VWD-1530 WHAT S IN THE BOX
WHAT S IN THE BOX WET & DRY VACUUM 1500W 30L INSTRUCTION MANUAL SPECIFICATIONS Mains Voltage: Input Power: Suction Power Max.: Tank Capacity: IP Rating: Product weight: ozito.com.au 230 240V ~ 50Hz 1500W
More informationHEDGE TRIMMER. 550W 450mm WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au HTE-550 WHAT S IN THE BOX
WHAT S IN THE BOX HEDGE TRIMMER 550W 450mm INSTRUCTION MANUAL SPECIFICATIONS Input: 230-240V ~ 50Hz Motor: 550W No Load Speed: 1,400/min Blade Length: 450mm Max. Cutting Capacity: 16mm Weight: 2.9kg ozito.com.au
More informationWET & DRY VACUUM 1250W 12L WARRANTY INSTRUCTION MANUAL SPECIFICATIONS VWD-1212 WHAT S IN THE BOX
WHAT S IN THE BOX WET & DRY VACUUM 1250W 12L INSTRUCTION MANUAL SPECIFICATIONS Input Power: 1250W Suction Power Max.: 140 mbar Air Flow: 27 l/s Tank Capacity: 12 l Hose Length: 1.5m Hose Diameter: 35mm
More informationWet & Dry Bench Grinder
Wet & Dry Bench Grinder 200/150mm Instruction Manual 3 Year Replacement Warranty OZWDBG250WA! warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions
More informationHeat Gun 2000W. To view the full range visit: Instruction Manual 3 Year Replacement Warranty OZHG2000WAK
Heat Gun 2000W Instruction Manual 3 Year Replacement Warranty OZHG2000WAK! WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric
More informationHEDGE TRIMMER. 600W 550mm INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au HTER-600 WHAT S IN THE BOX. Hedge Trimmer. Blade Cover.
WHAT S IN THE BOX HEDGE TRIMMER 600W 550mm INSTRUCTION MANUAL SPECIFICATIONS Input: 230-240V ~ 50Hz Motor: 600W No Load Speed: 1,400/min Blade Length: 550mm Max. Cutting Capacity: 20mm Weight: 3.15kg ozito.com.au
More informationCLEAN WATER SUBMERSIBLE PUMP
WHAT S IN THE BOX CLEAN WATER SUBMERSIBLE PUMP 550W INSTRUCTION MANUAL SPECIFICATIONS Motor: 550W Max. Flow Rate: 15,500l/h Max. Head: 8.5m Max. Immersion: 7m Min. Suction Depth: 50mm (automatic) 5mm (manual)
More informationMULTI PURPOSE MIXER 1050W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au DMM-080 WHAT S IN THE BOX. Multi-Purpose Mixer. Side Handle.
WHAT S IN THE BOX MULTI PURPOSE MIXER 1050W INSTRUCTION MANUAL SPECIFICATIONS Motor: 1050W Input: 230-240V ~ 50Hz No Load Speed: 0-550/min Max. Mixing Capacity: 80L Mixing Paddle Length: 600mm Mixing Paddle
More informationDIRTY WATER SUBMERSIBLE PUMP
WHAT S IN THE BOX DIRTY WATER SUBMERSIBLE PUMP 780W INSTRUCTION MANUAL SPECIFICATIONS Motor: 780W Max. Flow Rate: 15,700l/h Max. Head 8m Max. Immersion: 7m Min. Suction Depth 50mm Max Particle Size: Ø35mm
More informationWork-Shed Vac 1100 Watt
Work-Shed Vac 1100 Watt Operation Manual 3 Year Replacement Warranty WVG-951 To view the full range visit: www.ozito.com.au 0209 SPECIFICATIONS MODEL NO. WVG-951 Motor: Input: Max. vacuum: Hose length:
More informationSPECIFICATIONS MODEL NO. FBT-6300
! 0214 SPECIFICATIONS MODEL NO. FBT-6300 Input: 230 240V ~ 50Hz Motor Size: 370W Motor Speed: 1440/min Drum Speed: 23-26/min Gross Drum Volume: 220 Litres (7.7 cu ft) Unmixed Dry Volume: 170 Litres (6
More informationSUBMERSIBLE WATER PUMP
WHAT S IN THE BOX SUBMERSIBLE WATER PUMP 350W INSTRUCTION MANUAL SPECIFICATIONS Motor: 350W Max. Flow Rate: 7,000l/h Max. Head 5m Max. Immersion: 5m Min. Suction Depth 50mm Max Particle Size: Ø30mm Water
More informationDIRTY WATER SUBMERSIBLE PUMP
WHAT S IN THE BOX DIRTY WATER SUBMERSIBLE PUMP 750W INSTRUCTION MANUAL SPECIFICATIONS Motor: 750W Max. Flow Rate: 15,000l/h Max. Head 8m Max. Immersion: 8m Min. Suction Depth 50mm Max Particle Size: Ø35mm
More informationGENERAL POWER TOOL SAFETY WARNINGS
GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save
More informationDIRTY WATER SUBMERSIBLE PUMP KIT
WHAT S IN THE BOX DIRTY WATER SUBMERSIBLE PUMP KIT 1000W INSTRUCTION MANUAL SPECIFICATIONS Motor: 1000W Max. Flow Rate: 18,000l/h Max. Head 9m Max. Immersion: 7m Min. Suction Depth 50mm Max Particle Size:
More information2 IN 1 SUBMERSIBLE PUMP
GE-DP 7330 LL ECO 2 IN 1 SUBMERSIBLE PUMP 730W Einhell Germany AG INSTRUCTION MANUAL TECHNICAL DATA Input: 240V ~50Hz Motor: 730W Max. Flow Rate: 16,500l/h Max. Head: 8.5m Max. Immersion: 7m Min. Priming
More informationLawn Edger 1400W LWE To view the full range visit: Instruction Manual 2 Year Replacement Warranty
Lawn Edger 1400W Instruction Manual 2 Year Replacement Warranty LWE-1400 WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock,
More informationWET & DRY VACUUM WARRANTY WHAT S IN THE BOX PXVWDS-1818 SPECIFICATIONS
WHAT S IN THE BOX Cordless Wet & Dry Vacuum Air Hose, Extension Tubes & Adaptor WET & DRY VACUUM Crevice, Brush & Floor Tool INSTRUCTION MANUAL SPECIFICATIONS Voltage: Suction Power: Tank Capacity: Flow
More informationPole Hedge Trimmer 410mm 900W
Pole Hedge Trimmer 410mm 900W Instruction Manual 2 Year Replacement Warranty PHT-410 WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in
More informationSafety Warnings. Work area safety. Electrical Safety. Personal Safety
Table of Contents Safety Warnings...2 Work area safety...2 Electrical Safety...2 Personal Safety...2 Power tool use and care...3 Service...3 Hammer safety warnings...3 Product Layout...4 Product Description...4
More informationCONSTANT PRESSURE PUMP
WHAT S IN THE BOX CONSTANT PRESSURE PUMP 420W INSTRUCTION MANUAL SPECIFICATIONS Motor: 420W Max. Flow Rate: 1,900 l/h Max. Lift: 0m Max. Head: 33m Inlet: 25.4mm (1 BSP) Female Outlet: 25.4mm (1 BSP) Male
More informationINTRODUCTION SPECIFICATIONS. Pump Flow Curve
0112 INTRODUCTION Congratulations on purchasing the Commercial Electric 800W Automatic Pressure Pump. We aim to provide quality products at an affordable price. Before using, it is most important that
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Power Mixer UT2204 DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Power Mixer UT04 0078 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model UT04 No load speed (min - )
More informationCONSTANT PRESSURE PUMP
WHAT S IN THE BOX CONSTANT PRESSURE PUMP 8W INSTRUCTION MANUAL SPECIFICATIONS Motor: 8W Max. Flow Rate:, l/h Max. Lift: 8m Max. Head: 8m Inlet & Outlet:.mm ( BSP) Female Max. Delivery Pressure:.8 bar Water
More informationCLEAN WATER SUBMERSIBLE WATER PUMP
STANDARD EQUIPMENT CLEAN WATER SUBMERSIBLE WATER PUMP 400W INSTRUCTION MANUAL SPECIFICATIONS Motor: 400W Max. Flow Rate: 4,200l/h Max. Head: 11m Max. Immersion: 5m Min. Suction Depth: 50mm Max Particle
More informationSILENT SHREDDER 2400W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au SSH-240 WHAT S IN THE BOX
WHAT S IN THE BOX Shredder Housing SILENT SHREDDER 2400W Support Legs (x2) INSTRUCTION MANUAL SPECIFICATIONS Motor: 2400W (S6 40%) Input: No Load Speed: Max. Cutting: Blades: 230V 240V ~ 50Hz 40/min Ø40mm
More informationAccessories. Safety Warnings. Table of Contents
Table of Contents Accessories...1 Safety Warnings...1 Work Area...2 Electrical Safety...2 Personal Safety...2 Power Tool Use and Care...3 Service...3 Hammer Safety Warnings...3 Usage...4 Changing Tools...4
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL Random orbit sander WX655 2 3 1 9 4 5 8 6 7 A1 A2 10B 10A B C1 C2 D 11 E F E F G H1 H2 H3 H4 H4 GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all
More informationEnglish BT3600
www.blackanddecker.com 3 English BT3600 FIG. 1 FIG. 2 150mm BENCH GRINDER BT3600 GENERAL SAFETY RULES WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric
More informationELECTRIC GARDEN VACUUM
WHAT S IN THE BOX ELECTRIC GARDEN VACUUM 1600W INSTRUCTION MANUAL SPECIFICATIONS Voltage: 230-240V ~ 50Hz Power: 1600W No Load Speed: 14,000/min Mulching Ratio: 10:1 Suction Air Speed: 15m3/min Collection
More informationROTARY HAMMER DRILL KIT
KNOW YOUR PRODUCT ROTARY HAMMER DRILL KIT 9 joules 1050w INSTRUCTION MANUAL WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric
More informationBlower UB1100 UB1101 INSTRUCTION MANUAL
ENGLISH (Original instructions) INSTRUCTION MANUAL Blower UB00 UB0 004752 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
More informationRCD1802. ORIGINAL INSTRUCTIONS Compact Drill Driver
RCD1802 ORGNAL NSTRUCTONS Compact Drill Driver mportant! t is essential that you read the instructions in this manual before operating this machine. Subject to technical modifi cations. Safety GENERAL
More informationPOTABLE PRESSURE PUMP
WHAT S IN THE BOX POTABLE PRESSURE PUMP 8W INSTRUCTION MANUAL SPECIFICATIONS Motor: 8W Max. Flow Rate:, l/h Max. Lift: 8m Max. Head: 8m Inlet & Outlet:.mm ( BSP) Female Max. Delivery Pressure:.8 bar Water
More informationSPECIFICATIONS - MODEL NO. RSH-100 KNOW YOUR PRODUCT. RSH-100 Manual.qxd 1/11/11 1:01 PM Page 2
RSH-100 Manual.qxd 1/11/11 1:01 PM Page 2 SPECIFICATIONS - MODEL NO. RSH-100 Motor: Input: No load speed: Max cutting diameter: Noise level: Protection class: Weight: 2400W (S1 2000W / S6 (40%) 2400W)
More informationGT110
2 3 4 1 5 6 7 www.blackanddecker.com.au www.blackanddecker.co.nz GT110 4 8 A C1 2 9 B C2 Intended use Your Black & Decker hedge trimmer has been designed for trimming hedges, shrubs and brambles. This
More information3 IN 1 VACUUM BLOWER-MULCHER
WHAT S IN THE BOX 3 IN VACUUM BLOWER-MULCHER 2400W INSTRUCTION MANUAL SPECIFICATIONS Voltage: 230-240V ~ 50Hz Power: 2400W No Load Speed: 0,000-5,000/min Air Speed: 60-270km/h Mulching Ratio: 0: Collection
More informationELECTRIC GRASS TRIMMER 250W 230mm INSTRUCTION MANUAL SPECIFICATIONS
MAINTENANCE WARNING!: Ensure the tool is disconnected from the power supply before performing any of the following operations. NOTE: The trimmer has two removable plastic blades that can be quickly and
More informationATD /8 Electric Drill
ATD-10538 3/8 Electric Drill Tool specifications: Rated Voltage: (V) 120 Rated Frequency: (Hz) 60 Rated current: (A) 3.3 No-load Speed: (RPM) 0-2700 Speed Selection: Yes Right/Left Rotation: Yes Chuck
More informationELECTRIC BLOWER VAC 2400W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au BLV-2402 WHAT S IN THE BOX. Blower Vac. Blower Tubes
WHAT S IN THE BOX ELECTRIC BLOWER VAC 2400W INSTRUCTION MANUAL SPECIFICATIONS Voltage: 230-240V ~ 50Hz Power: 2400W No Load Speed: 14,000/min Air Speed: 270 km/h Mulching Ratio: 10:1 Collection Bag: 40L
More informationTECMAF HIGH FREQUENCY GRINDERS WARRANTY: 06 (SIX) MONTHS FROM THE DATE OF SHIPMENT
SPECIFIC SAFETY RULES FOR POWER TOOLS Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term power tool in all of the warnings listed below refers
More informationECOMOW ELECTRIC MOWER
WHAT S IN THE BOX ECOMOW ELECTRIC MOWER 1000W 305mm ORIGINAL INSTRUCTIONS SPECIFICATIONS Motor: No Load Speed: Cutting Width: Cutting Heights: Catcher Capacity: Weight: ozito.com.au 1000W 3,400/min 305mm
More informationSAFETY AND OPERATING MANUAL. 450W/46cm HEDGE TRIMMER JM450PHT
SAFETY AND OPERATING MANUAL 450W/46cm HEDGE TRIMMER JM450PHT GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may
More informationRapid Shredder. 2400W Instruction Manual 2 Year Replacement Warranty RSH-100. To view the full range visit:
Rapid Shredder 2400W Instruction Manual 2 Year Replacement Warranty RSH-100 WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric
More informationRAPID SHREDDER 2400W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au RSH-2435 STANDARD EQUIPMENT
STANDARD EQUIPMENT RAPID SHREDDER 2400W INSTRUCTION MANUAL SPECIFICATIONS Power Rating: 2400W (S6 40%), 2000W (S1) No Load Speed: 4,000/min Max Cutting: Ø40mm Noise Level: 112 db Blades: Reversible Collection
More informationManual. Belt Sander BSL 115/E. ProxxonTools.com
ProxxonTools.com Belt Sander BSL 115/E Manual 3080767 Conforms to ANSI/UL 60745-1 ANSI/UL 60745-2-4 Certified to CAN/CSA-C22.2 No. 60745-1-04 CAN/CSA-C22.2 No. 60745-2-4-04 Fig. 1 Fig. 2 Fig. 3 Fig. 4
More information3-IN-1 BLOWER VAC-MULCHER
WHAT S IN THE BOX 3-IN-1 BLOWER VAC-MULCHER 2400W INSTRUCTION MANUAL SPECIFICATIONS Voltage: 230-240V ~ 50Hz Power: 2400W No Load Speed: 8000-14,000/min Air Speed: 150-270 km/h Mulching Ratio: 15:1 Air
More informationECOMOW ELECTRIC MOWER
WHAT S IN THE BOX ECOMOW ELECTRIC MOWER 1500W 360mm ORIGINAL INSTRUCTIONS SPECIFICATIONS Motor: No Load Speed: Cutting Width: Cutting Heights: Catcher Capacity: Weight: ozito.com.au 1500W 3,400/min 360mm
More informationECOMOW ELECTRIC MOWER
WHAT S IN THE BOX ECOMOW ELECTRIC MOWER 1800W 420mm INSTRUCTION MANUAL SPECIFICATIONS Power: Input: No Load Speed: Cutting Diameter: Cutting Heights: Catcher Capacity: Weight: 1800W 220-240V~50/60Hz 3,200/min
More informationCD400A-XE KA196-XE KA273-XE KA196E-XE Australia New Zealand
www.blackanddecker.com.au CD400A-XE KA196-XE KA273-XE KA196E-XE Australia New Zealand CD400A-XE 1 4 3 1 2 KA196-XE/KA196E-XE 5 1 KA273-XE 4 3 2 A 3 2 4 2 B 3 4 4 3 3 4 C D 4 3 E 2 6 7 8 5 G F 10 11 9 CD400A-XE
More information3 IN 1 Vacuum Blower-Mulcher 2400W
3 IN 1 Vacuum Blower-Mulcher 2400W Instruction Manual 2 Year Replacement Warranty BLV-2401 WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result
More informationEHG2000. ORIGINAL INSTRUCTIONS Heat Gun
EHG2000 ORIGINAL INSTRUCTIONS Heat Gun Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. Safety SAFETY RULES WARNING
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Demolition Hammer HM0810TA DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Demolition Hammer HM080TA 00079 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model HM080TA Blows per
More informationSAFETY AND OPERATING MANUAL 400W. 125mm RANDOM ORBITAL SANDER JM400ROS
SAFETY AND OPERATING MANUAL 400W 125mm RANDOM ORBITAL SANDER JM400ROS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions
More informationCable Drum Machine. Operation Manual 110ES SERIES. Cleans 1 1/4" to 3" lines up to 25'
Cable Drum Machine Operation Manual 110ES SERIES Cleans 1 1/4" to 3" lines up to 25' Used For: Sinks, Showers &Tub Drains WARNING - Read All Instructions, When Using Electric Tools, Basic Safety Precautions
More informationDrywall Screwdriver INSTRUCTION MANUAL
ENGLISH (Original instructions) INSTRUCTION MANUAL Drywall Screwdriver 68 00603 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE
More informationELECTRIC BODY SAW INSTRUCTIONS. Item #31660
ELECTRIC BODY SAW INSTRUCTIONS Item #31660 The EASTWOOD ELECTRIC BODY SAW is great for use on virtually all metals including steel, aluminum, brass and more. Cuts wood, fiberglass and other materials with
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Belt Sander DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Belt Sander 990 99 00336 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 990 99 Belt size 76 mm x
More informationBRUSHLESS STEEL DECK MOWER ORIGINAL INSTRUCTIONS
STANDARD EQUIPMENT Brushless Lawn Mower BRUSHLESS STEEL DECK MOWER ORIGINAL INSTRUCTIONS SPECIFICATIONS Voltage: Cutting Diameter: Cutting Heights: No Load Speed: Grass Catcher: Weight (Tool Only): ozito.com.au
More informationInstructions for Use. Electric Pole Hedge Trimmer Input Power Tooth gap of cutter blade 16mm
Voltage/Frequency 230V-240V a.c./ 50Hz Input Power 450W Tooth gap of cutter blade 16mm Strokes 1,600/min Noise emission value LWA 100 db(a) Hand / arm vibration a vhw < 2.5 m /s2 Total Length 1.9m-2.5m
More informationDrywall Screwdriver R INSTRUCTION MANUAL
ENGLISH (Original instructions) INSTRUCTION MANUAL Drywall Screwdriver 6823 6824 6825 6825R 002604 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS
More informationELECTRIC DRILL INSTRUCTIONS. Item #21285
ELECTRIC DRILL INSTRUCTIONS Item #21285 The EASTWOOD ELECTRIC DRILL is great for use on virtually all metals including steel, aluminum, brass and more. The powerful 6.3 Amp motor and 1/2 capacity chuck
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL Original instructions GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in
More information2.5MM ELECTRIC NIBBLER
596701 2.5MM ELECTRIC NIBBLER PLEASE STORE T GENERAL SAFETY RU WARNING! FAILURE TO FOLLOW ELECTRIC SHOCK, FI LISTED HERE REFERS BATTERY-OPERATED TOOLEX INDUSTRIAL 5 1 ) Work area a) Keep work area c b)
More informationCable Drum Machine Operational Manual CP1020
TOOLS FOR THE PROFESSIONAL PLUMBER TOOLS FOR THE PROFESSIONAL PLUMBER Cable Drum Machine Operational Manual CP1020 Used For: Sinks, Showers and Tub Drains Cleans 3/4" to 3" lines up to 25' (Not for roots)
More informationSPECIFICATIONS - MODEL NO. ELM-300
SPECIFICATIONS - MODEL NO. ELM-300 Motor: Input: No load speed: Cutting Diameter: Cutting Heights: Capacity of catcher: Weight (tool only): 1000W 220-240V ~ 50Hz 3600/min 300mm 20mm, 40mm, 60mm 28 Litre
More informationMini-Rooter Operating Instructions
Mini-Rooter Operating Instructions For 1-1/4 through 4 lines (30mm 100mm) Your Mini-Rooter is designed to give you years of trouble-free, profitable service. However, no machine is better than its operator.
More informationTE 300-AVR. English Français Español Português
TE 300-AVR English Français Español Português en fr es pt 1 2 3 4 5 6 7 8 9 TE 300-AVR en Original operating instructions....................................... 1 fr Mode d'emploi original............................................
More informationTE 2 TE 2-M TE 2-S. English Français Español Português
TE 2 TE 2-M TE 2-S English Français Español Português en fr es pt 1 Printed: 15.12.2015 Doc-Nr: PUB / 5261122 / 000 / 00 2 3 4 5 Printed: 15.12.2015 Doc-Nr: PUB / 5261122 / 000 / 00 6 7 8 TE 2 TE 2-M TE
More informationProduct Code: Cordless Patio Weed Sweeper INSTRUCTION MANUAL. Please retain for reference.
Product Code: 2036884 Cordless Patio Weed Sweeper INSTRUCTION MANUAL Please retain for reference. 1 Table of Contents: Safety Instructions 2 Product Description 3 Safety Symbols 3 Warnings 4-5 Parts breakdown
More informationORIGINAL INSTRUCTIONS. 18V ONE + Cordless Pole Pruner. RPP1820Li15 OPP1820
ORIGINAL INSTRUCTIONS 8V ONE + Cordless Pole Pruner RPP80Li5 OPP80 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications.
More informationHIGH PRESSURE CLEANER
WHAT S IN THE BOX HIGH PRESSURE CLEANER 1300W 100 BAR ORIGINAL INSTRUCTIONS SPECIFICATIONS Input: Motor: Rated Flow Rate: Permissible Pressure: Rated Pressure: Max. Water Inlet Pressure: Water Inlet Temperature
More informationUser Manual Drywall Sander Model: BNR7231A
User Manual Drywall Sander Model: BNR7231A - Page 1- 1. PRODUCT DESCRIPTION The machine is designed for grinding drywalls, ceilings and walls of the inner and outer surfaces, clearing the floor residues,
More informationELECTRIC TACKER Original instructions
ESN114 ESN530 ELECTRIC TACKER ELEKTRISCHER TACKER AGRAFEUSE ÉLECTRIQUE ELEKTRISCHE TACKER FISSATRICE ELETTRICA CLAVADORA ELÉCTRICA AGRAFADOR ELÉCTRICO ELEKTRISK HÄFTPISTOL ELEKTRISK HÆFTEPISTOL ELEKTRISK
More informationPORTABLE HAND POWER THREADER 1/2-2
PORTABLE HAND POWER THREADER 1/2-2 Read this Operator s Manual carefully before using this tool. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or
More informationQualcast 500W Electric Hedge Trimmer
Qualcast 500W Electric Hedge Trimmer Assembly Manual GHT500A1 After Sales Support UK/Ireland 0344 801 0979 Web WWW.ARGOS.CO.UK Important- Please read these instructions fully before starting assembly These
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Random Orbit Sander BO5020 BO5021 DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Random Orbit Sander BO500 BO50 00377 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model BO500 BO50 Pad
More informationORIGINAL INSTRUCTIONS Cordless Hedge Trimmer RBC36X26E RHT3626DR RBC36X26E RHT3600R
ORIGINAL INSTRUCTIONS Cordless Hedge Trimmer RBC36X6E RHT366DR RBC36X6E RHT3600R Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the
More informationTE 3-M TE 3-C. English Français Español. Printed: Doc-Nr: PUB / / 000 / 01
TE 3-M TE 3-C English Français Español en fr es Printed: 25.11.2015 Doc-Nr: PUB / 5245522 / 000 / 01 1 This Product is Certified Ce produit est homologué Producto homologado por Este produto está registrado
More informationEnglish (Original instructions) 5
KA198 KA198GT English (Original instructions) 5 2 A B C D E F 3 G 4 Intended use Your Black & Decker sander has been designed for sanding wood, metal, plastics and painted surfaces. This tool is intended
More informationTE 2 TE 2-M TE 2-S English
TE 2 TE 2-M TE 2-S English 1 Information about the documentation 1.1 About this documentation Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling
More informationSafety instructions ENGLISH. General power tool safety warnings. (Original instructions)
FME670 A B C D E F 2 (Original instructions) ENGLISH Intended use Your Stanley Fat Max heat gun has been designed for various heating applications such as paint stripping. This tool is intended for professional
More informationCD60RE CD60CRE CD70CRE AST2XC
1 CD60RE CD60CRE CD70CRE AST2XC English (Original instructions) 4 2 A B C D E 3 Intended use Your Black & Decker inpact drill has been designed for drilling in wood, metal, plastics, and masonry as well
More informationSafety instructions ENGLISH. General power tool safety warnings. (Original instructions)
KX1650 A 3 2 (Original instructions) ENGLISH Intended use Your Black & Decker heat gun has been designed for various heating applications such as paint stripping. This product is intended for consumer
More informationBG8SS. 8 Inch Slow Speed Bench Grinder with LED Lights Assembly & Operating Instructions
BG8SS 8 Inch Slow Speed Bench Grinder with LED Lights Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This
More informationPORTABLE HAND POWER THREADER 1/2-2
PORTABLE HAND POWER THREADER 1/2-2 Read this Operator s Manual carefully before using this tool. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or
More informationEnglish (Original instructions) 5
KA88 English (Original instructions) 5 2 A B C D E F 3 G 4 Intended use Your Black & Decker sander has been designed for sanding wood, metal, plastics and painted surfaces. This tool is intended for consumer
More informationEnglish (Original instructions) 3
KC9006 AS600 English (Original instructions) 3 A B C D 2 Intended use Your Black & Decker screwdriver has been designed for screwdriving applications. This tool is intended for consumer use only. Safety
More informationDUST EXTRACTOR MODEL No: CDE1000
DUST EXTRACTOR MODEL No: CDE000 Part No:64765 OPERATING & MAINTENANCE INSTRUCTIONS GC054 INTRODUCTION Thank you for purchasing this CLARKE Dust Extractor which is intended to keep work areas free from
More informationWET & DRY GARAGE VAC 20L CAPACITY WATT 1.5M MOTOR TANK STEEL HOSE KP702 ON BOARD ACCESSORY STORAGE SUCTION STAINLESS
WET & DRY GARAGE VAC 20L CAPACITY 1.5M SUCTION HOSE STAINLESS STEEL TANK ON BOARD ACCESSORY STORAGE 1250 WATT MOTOR KP702 Table of Contents 20L WET & DRY GARAGE VAC Know Your Product...1 Vacuum Safety
More informationEnglish... 5 Čeština Slovenčina Magyarul Polski Русский... 85
FDS 10150-A 2 English... 5 Čeština... 21 Slovenčina... 37 Magyarul... 53 Polski... 69 Русский... 85 1 FDS 10150-A 4 FDS 10150-A Contents 5 EN Screwdriver INSTRUCTION MANUAL Thank you for your purchase
More information750MM INDUSTRIAL PEDESTAL DRUM FAN
750MM INDUSTRIAL PEDESTAL DRUM FAN 360 ROTATION & 2 ADJUSTABLE TILT CONSTRUCTION INCLUDES ANTI-TRIP BASE ENERGY EFFICIENT MOTOR KP1013 ED1 (JULY 15) 1 Table of Contents Know Your Product... 2 Fan Safety
More informationM Class 110V 35L Wet & Dry Vacuum Cleaner
INSTRUCTIONS FOR M Class 110V 35L Wet & Dry Vacuum Cleaner Stock No.86685 Part No.WDV35LMC110V IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS PRODUCT.
More informationHigh-Velocity Floor Fan
High-Velocity Floor Fan Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationD O U B L E A U G E R M O R TA R M I X E R OWNER S MANUAL
D O U B L E A U G E R M O R TA R M I X E R OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information