Toll Free: Fax: Ibico Kombo Binder

Size: px

Start display at page:

Download "Toll Free: Fax: Ibico Kombo Binder"

Dayna Davidson
6 years ago
Views:

1 Toll Free: Fax: Ibico Kombo Binder Installation and Set-up Carefully unpack and inspect your new Ibico plastic binding machine for shipping damage. If any damage is noticed it should be brought to the immediate attention of the delivery carrier. Place the machine on a suitable table close to an easily accessible 115 volt outlet. The following instructions will demonstrate certain methods and techniques to improve your binding results. Before using the machine carefully read through these instructions. This machine is designed to punch up to 12 sheets of common photo copy paper. Cover materials vary in thickness and composition; as a rule, covers should be punched two at a time separate from the document. Some brands of clear plastic covers and sheet protectors do not punch cleanly and may damage the machine. All Ibico cover materials are manufactured to punch cleanly in any Ibico machine. Starting the Machine To start the machine, plug into standard electricity socket (115 V). Punching block moves audibly into starting position. Attach handle right hand side onto shaft end. Secure handle using enclosed screw and allen wrench. Punching 1. Use guide to determine size of plastic comb. 2. Adjust punching depth with black knob (on right hand side). 3. Fanning and jogging the paper enables all sheets to be placed flush against the paper stop for punching. 4. Place sheets flush into the machine (use side guide for adjustment). 5. Press switch on top right hand side. If too many sheets are used, the punching block automatically reverses back to its original position. Reduce number of sheets to maximize punching capacity and press switch again to restart cycle. Binding 1. Place plastic comb open side up behind vertical metal fingers. 2. Push handle toward the rear to open rings of the plastic comb to the desired distance. 3. Set the opening of the comb with black knob (left hand side). 4. Place punched sheets into open comb, front page facing you. 5. Move handle back into original (vertical) position to close binding element. 6. Remove bound and finished book vertically. Adding and removing pages once bound To add and remove pages once bound, reverse operation. Your Ibico document is now bound! Punching Capacity: 10 to 12 sheets (regular copy paper). Maximum 2 covers (10 Mil). Note: Empty the waste drawer regularly. Technical Data: 115 Volts 60Hz 120 Watts 1.4 amps 1

2 IBICO Plastic Comb Guide: Margin Depth Position 1 Position 1 φ (in) Round 3/16 ¼ 5/16 3/8 7/16 No. of sheets (80 gsm) Margin Depth Position 3 φ (in) Round ½ 9/16 5/8 No. of sheets (80 gsm) Margin Depth Position 4 φ (in) Round ¾ 7/ /8 No of sheets (80 gsm) Margin Depth Position 4 φ (in) Oval (S.L.) 1-1/4 1-1/2 1-3/4 2 No. of sheets (80 gsm) IMPORTANT: To turn the machine off, disconnect plug from socket. LIMITED WARRANTY FOR PUNCHING AND BUINDING EQUIPMENT IBICO punching and binding equipment is warranted for a period of one year form the date of the dealer s sale to the consumer. Excluded from the warranty are the dies which are subject to wear. For service of a unit under warranty, call Ibico Inc. Repair Services at IBICO INC. will repair or replace at your option the unit free of charge and return it prepaid. Please include a copy of your paid invoice. Any unit sent without proof of purchase will not be serviced free of charge. Instead such units will be serviced at the prevailing rates and returned C.O.D. This warranty does not extend to any IBICO machine that has been subject to misuse, neglect, accident, or it the serial number has been altered or defaced, or the unit has been opened. This warranty contains the entire obligation of IBICO INC. Unless prohibited by law neither this warranty nor any other warranty express of implied, including implied warranties of merchantability, shall extend beyond the warranty period. No responsibility is assumed for incidental or consequential damages. This warranty is valid only within the contiguous 48 states. IBICO INC. will honor this warranty outside this area with the stipulation that all shipping and related charges involved in transporting the defective unit to and from IBICO s premises will be borne by the customer. 2

3 3

4 Parts List ITEM GBC# IBICO# DESCRIPTION QTY. 1) CHASSIS PB ) DRAWER GUIDE 2 3) RUBBER FOOT 4 4) X ½ SLTD. HEX SELF TAP SCREW 6 5) STOP PAPER GUIDE 1 6) ADJUSTING SCREW 1 7) WASHER 1 8) WASHER M6 1 9) BEARING BRACKET ASM. (RIGHT) 1 10) PHILIPS SCREW FLT HD M5X ) AXLE COMPLETE 1 12) BEARING BRACXKET ASM. (LEFT) 1 13) ALLEN SCREW M5XZ10 BURNISHED 7 14) SPRING WASHER 1 15) DISTANCE PLATE 14X26X ) RETAINING RING A ) PAPER STOP LEVER 1 18) PAPER STOP GUIDE 1 19) PAPER STOP RAIL CPL. 1 20) PUNCH BLOCK ASM. (LEFT) 1 21) PUNCH BLOCK ASM. (CENTER) 1 22) PUNCH BLOCK ASM. (RIGHT) 1 23) ALLEN SCREW M5X12 BURNISHED 4 24) ALLEN SCREW M5X16 BURNISHED 8 25) PRESSURE BEAM ASM. 1 26) TOOTHED RACK ASM. (RIGHT) 1 27) TOOTHED RACK ASM. (LEFT) 1 28) SPRING LOCK WASHER M5 6 29) ALLEN SCREW M5X20 BURNISHED 2 30) PRESSURE SPRING 2 31) SPRING HOLDER ASM. (LEFT) 1 32) SPRING HOLDER ASM. (RIGHT) 1 33) COVER PLATE (LEFT) 1 34) COVER PLATE (RIGHT) 1 35) HINGE ASM. (LEFT) 1 36) HINGE ASM. (RIGHT) 1 37) CONTROL KNOB 1 38) KNOB 1 39) NUT 2 40) LOCTITE 1 41) SCREW 1 42) KNOB COVER 2 43) LUBRIPLATE #130-AA 1 44) BACK COVER IBICO-GREY 1 45) FRONT COVER IBICO-GREY 1 46) THREAD CUTTING SCREW M3X ) COMB ASM. 1 48) CARRIER CPL. 1 49) SLIDE 1 50) COVER PLATE ASM. 1 51) DRAWER 1 52) LEVER COMPLETE, GREY KOMBO 1 53) RULER, KOMBO SELF ADHESIVE 1 4

5 5

6 6

User s Manual and Operating Instructions

User s Manual and Operating Instructions Model Numbers: CL-30P-DDF, CL-20F-DDF, CL-24O-DDF, CL-30-DDF READ AND SAVE THESE INSTRUCTIONS IMPORTANT: Read and understand all of the directions in this manual