SOLAR multifunctional DRYER SG250

Size: px

Start display at page:

Download "SOLAR multifunctional DRYER SG250"

Marsha Fowler
6 years ago
Views:

1 SOLAR multifunctional DRYER SG250 Professional solar drying of corn like coffee, cocoa, rice, maize, beans...

ADVANTAGES of SOLAR drying by CONA 1. AIR CAN QUICKLY GET WARMED UP The warmer the air, the more water can be taken away from the drying property.

By the big aerial amount which is warmed up, can be taken away a lot of water from the drying property. 3.

By the special surface the air can well escape, but the grain can not fall into. We recommend, nevertheless, to empty the chamber once per day with extremely humid material and again to refill it.

With it an excellent transference of the energy to the air is achieved, to allow top achievements of more than 700 watts per m².

2 ADVANTAGES of SOLAR drying by CONA 1. AIR CAN QUICKLY GET WARMED UP The warmer the air, the more water can be taken away from the drying property. This air is generated in the solar air collectors quickly and efficiently. 2. CAREFUL DRYING With the solar component of the drying arrangement temperatures up to 60 degrees are reached. By the big aerial amount which is warmed up, can be taken away a lot of water from the drying property. 3. STEADY DRYING IN THE WHOLE CHAMBER The whole bulk is ventilated by the whole-flat ventilation ground with a special surface and the drying occurred very evenly. By the special surface the air can well escape, but the grain can not fall into. We recommend, nevertheless, to empty the chamber once per day with extremely humid material and again to refill it. Therefore a good mixing and it arises no mould nests originate. 4. EFFECTIVE SOLAR AIR COLLECTOR Heart of the aerial collector CONA is the special absorber with 5-fold integrated heat exchanger. With it an excellent transference of the energy to the air is achieved, to allow top achievements of more than 700 watts per m². See in addition patents, certification and achievement tests of ASIC and Fraunhofer ISE. Registernr.: 011-7S2471L 5. HYGIENIC DRYING & AN EASY CLEANING The drying chamber is equipped inside with a galvanised metal ground and the material can be cleaned easily and the drying material does not get into contact with the ground. 6. APPLICATION OF LONG-LASTING MATERIALS Materials like glass, high-grade steel, galvanised tins, aluminium... allow a long life span of the arrangement.

ADVANTAGES of SOLAR drying by CONA 7. LOW SERVICING EXPENDITURE On account of the high-quality materials servicing is hardly necessary.

NO LOSS BY HEAT EXCHANGER On account of the direct use of the solar-warmed up air, no heat exchanger is necessary.

ERGONOMIC WORKING HEIGHT By the especially elective height of the drying chamber an easy load and unload is possibly. 10. IN AN ENVIRONMENTALLY FRIENDLY WAY AND POWER-SAVING 99.

The electric expenditure can be covered in island solutions by photovoltaic. 11.

3 ADVANTAGES of SOLAR drying by CONA 7. LOW SERVICING EXPENDITURE On account of the high-quality materials servicing is hardly necessary. Occasional solar surface cleaning with low precipitation. With strong weather influence the drying chamber can be stroked outside anew after years. 8. NO LOSS BY HEAT EXCHANGER On account of the direct use of the solar-warmed up air, no heat exchanger is necessary. Also the air channels of the drying arrangement is well isolated in this way the energy reaches almost freely of loss to the drying chamber. 9. ERGONOMIC WORKING HEIGHT By the especially elective height of the drying chamber an easy load and unload is possibly. 10. IN AN ENVIRONMENTALLY FRIENDLY WAY AND POWER-SAVING 99.9% of the arrangement are ecologically diminishable or recycleable watts of electric expenditure for the ventilating fans face watt of thermal solar achievement. The electric expenditure can be covered in island solutions by photovoltaic. 11. ASSEMBLY ON SITE BY YOURSELF By detailed assembly instructions and assembly videos a selfassembly is slightly possible on site. The multifunction model SG250 is so far preassembled that a quick assembly in 2-3 hours is possible. 12. USER-FRIENDLY The filling and emptying the dryer is very easy, by the slant the large part of the material trickles by itself to the outlet. If the drying good is extremely wet, we recommend to run the ventilating fan also at night.

Functioning of the dryer SG250 1,00m 0,50 m 1. The sunrays are converted in the collector into usable warmth. 2. Chiller outside air is led by the collector and is warmed up in it. 3.

The dry-warm air is distributed by the predefined special surface of the ventilation ground whole-flatly and is pressed through drying good. 5.

4 Functioning of the dryer SG250 1,00m 0,50 m 1. The sunrays are converted in the collector into usable warmth. 2. Chiller outside air is led by the collector and is warmed up in it. 3. The warmed up air reaches by means of ventilating fan by the funnel of the collector to the ventilation ground. 4. The dry-warm air is distributed by the predefined special surface of the ventilation ground whole-flatly and is pressed through drying good. 5. The warm air can take up more humidity of the drying good and takes it away. Contact us, we advise you with pleasure: CONA SOLAR AUSTRIA, Voitsdorf 55 - A 4551 Ried im Traunkreis Telefon: +43 (0)7588 / solar@cona.at Internet:

..) Dehydration per day (6-10 solar hours) 250 liter 12-20 liter Drying range 2-4 days Solar surface

5 Product details Specifications SG250 Volume per filling (Coffee, cocoa, rice, maize, beans...) Dehydration per day (6-10 solar hours) 250 liter liter Drying range 2-4 days Solar surface 2m² thermal top achievement of the solar arrangement 1.440W electric consumption of the ventilating fan 24W Dimension collector (=roof of the arrangement) 206 x 106cm Whole height dryer + Solar 192cm

Refrigeration Systems Handbook

Refrigeration Systems Handbook Viessmann Refrigeration Systems Viessmann is one of Europe s leading supplier of refrigeration solutions. Local refrigeration sales organisationsin 18 different countries