WP1540 WP kn. 15 kn. 25 kn > Page 06 Medium-weight and reversible: Heavy and reversible: Heavy and remote-controlled: DPU90 DPU80

Transcription

1 Vibratory plates

2 These reasons speak for vibratory plates from Wacker Neuson. Compaction expertise to the last detail. 1. Uncompromising economic efficiency! With innovations for optimum compaction performance. Great performance, low consumption. No component is too much. We are, however, full of ideas and technologies that make operation and work easier for you. You will only find this combination with the vibratory plates and vibratory trench rollers from Wacker Neuson. 2. Reliable operation! With time-tested and proven quality from the compaction specialists. Unload. Switch on. Get started. And then straight to the next project. You cannot afford to stand still. That is why our vibratory plates run reliably for as long as you need them supported by our first-class service. 3. Your needs in focus! With the complete selection of compaction equipment. The extensive product range of vibratory plates is not only perfectly matched to your different application areas, but is also exemplary in its maintenance. We will be pleased to advise you about which product and accessory are right for your project and we will help you with the financing as well. Wacker Neuson all it takes! We offer products and services rendered that meet your high requirements and diverse applications. Wacker Neuson stands for reliability. This of course also applies to our large range of vibratory plates. We do our best every day to ensure your success. And we do this full of passion for our jobs. Precise compaction Compatec shows you when no further compaction is required with the respective unit. Over-compaction and overload are thus avoided. Diesel or gasoline drives High power reserves and a long service life characterize the engines of all models. Many models are optionally available with gasoline or diesel-driven engines. Low hand-arm vibrations (HAV) Low hand-arm vibrations (HAV) are essential, especially during long-time application. Almost all reversible vibratory plates from Wacker Neuson can be used without a time restriction, sometimes even without a documentation requirement. Transport in no time Whether on the construction site or on a vehicle: Sophisticated details make transporting the vibratory plates convenient and easy. Remote-controlled operation The models DPU80r, DPU110r and DPU130r can be operated comfortably and safely by infrared remote control. Read more on pages 13 and 15. Wacker Neuson distinguishes particularly economical and environmentally friendly products with the ECO seal, including the vibratory plate DPU130r. Overview of all vibratory plates. Single direction: Lightweight and reversible: VP1030 VP1135 VP1340 VP1550 VP2050 WP1540 WP1550 DPS1850 WPU1550 DPU2550 DPU3050 DPU kn 11 kn 13 kn 20 kn 18 kn 25 kn > Page 04 > Page 05 > Page 05 > Page 06 Medium-weight and reversible: Heavy and reversible: Heavy and remote-controlled: 30 kn 37 kn DPU4045 DPU4545 DPU5545 DPU6555 DPU80 DPU90 DPU110 DPU80r DPU110r DPU130r 40 kn 45 kn 55 kn 65 kn 80 kn 90 kn 110 kn 80 kn 110 kn 130 kn > Page 08 > Page 10 > Page 10 > Page 12 > Page

3 Single direction vibratory plates Easy to maneuver and extremely mobile with the small single direction vibratory plates, you will effortlessly reach every narrow spot. VP1030 VP1135 VP1340 VP1550 VP2050 Power output (kn) Weight (kg) Type of engine Gasoline engine Convinces with all-round qualities for small areas and niches, mixed soil types as well as interlocking paving stones and asphalt. Ideal for long-time application in asphalt and paving stone compaction, for processing top layers and base courses and can be adjusted to different ground conditions. DPS series The versatile DPS1850 Vario: adjustable centrifugal force to adapt the compaction force to different soils and layer thicknesses Asphalt specialist DPS1850 asphalt: with a 11-liter water tank, sprinkler system and protective cage. Outfitting also available as an accessory for DPS1850 Basic and DPS1850 Vario DPS1850 DPS1850 DPS1850 Basic Asphalt Vario Power output (kn) Weight (kg) Type of engine Diesel engine VP series: Optimum water sprinkling through maximum supply quantity, comfortably adjustable with a large regulator At all times, sufficient water flow thanks to high-quality filter A full workday of long, comfortable working thanks to very good damping of the control handle (hand-arm vibration values below 5 m/s²) Easy access to the tank and optimum balance when loading by 90 turned lifting eye The narrowing control handle makes it ideal for working along walls: no abrasion marks on the wall, more hand freedom (from VP1340) Robust, durable cylindrical roller bearings Additional front handle facilitates transportation, e.g. by two people Ideal for asphalt compaction: A bent control handle provides stability in the case of lateral guiding, e.g. along curbs All models available without water tank and sprinkler system Particularly efficient in asphalt compaction: The 11-liter water tank allows long uninterrupted work. WP series Sturdy tubular frame provides complete protection and handles for transport and lateral operation. Lifting eye integrated. The base plate is made of a highly wear resistant material with a high surface quality for perfectly compacted asphalt 2 operating widths available (400 mm and 500 mm) High quality Honda gasoline engine All models available without and with 11-liter water tank and sprinkler system WP1540 WP1550 Power output (kn) Weight (kg) Type of engine Gasoline engine High level of mobility on the construction site: thanks to the optional wheel set (from VP3040 and for all WP models). Accessories for asphalt work 9-liter water tank with sprinkler system. Practical for asphalt work: Equipment can be pulled, since the control handle can be swiveled to the front (only WP series). Special Vario exciter allows variable adjustment of centrifugal forces, in order to adapt the compaction force individually to the ground - ideal also for the vibration of interlocking paving stones

4 Lightweight reversible vibratory plates More operating comfort due to the forward and reverse travel direction combined with a compact design that is what the small reversible vibratory plates from Wacker Neuson offer you. Economical solution thanks to the very convincing price/performance ratio. DPU2540* DPU2550 DPU2560 DPU3050* DPU3060* DPU3070* DPU3750* DPU3760 Power output (kn) Weight (kg) Type of engine Diesel engine * Models optionally also available with gasoline engine (BPU) DPU series Handle damping for fatigue-free and comfortable working (hand-arm vibrations under 5 m/s²) Electric starter is available as an option for the DPU3050, DPU3060, DPU3750 and DPU3760 models Extremely economical and durable due to break-proof, low-wear materials Fold-down and displaceable lifting eye Base plate made of wear resistant nodular cast iron guarantees a long service life WPU1550 Smallest and most lightweight reversible vibratory plate from Wacker Neuson Solid steel tubular frame offers the possibility of lateral guidance as well as reliable protection of the engine and water tank Base plate made of high quality nodular cast iron: for easy turning on asphalt, without roughening it up Sturdy transport roller with a wide contact surface prevents tracks in fresh asphalt Sprinkler system for optimal water distribution across the entire width of the base plate For the compaction of paths, trenches, in confined areas, for paving stones or maintenance work. WPU1550 Power output (kn) 15 Weight (kg) 90 Type of engine Gasoline engine Widths from 40 to 70 cm available Very easy to maneuver: thanks to the specially shaped base plate of the WPU1550. Integrated wheel set: maintenance-free and sturdy even in the toughest conditions. Perfect center pole fastening: self-locking and absolutely free of play. Top-speed version: for the high compaction performance with paving stone laying

5 Medium-weight reversible vibratory plates For long-time application, you can rely on the extremely high compaction performance of the medium-weight reversible vibratory plates from Wacker Neuson. Hand-arm vibration (HAV) values far below the trigger value save the effort of documentation. DPU4045 DPU4545 DPU5545* DPU6555 Power output (kn) Weight (kg) Type of engine Diesel engine * Model optionally also available with gasoline engine (BPU) DPU series First-class compaction force Handle damping for fatigue-free and comfortable work Engines with high power reserves provide for a long service life Intelligent functions, such as low oil shutdown, self-adjusting V-belt, maintenance-free alternator Base plate made from wear resistant nodular cast iron Optional outfitting for electric starter models: Compatec, operating hour meter, extra-wide extension plates All-rounder for all construction sites! For professional long-time application, the compaction of anti-frost layers and subbases in road and highway, path and parking lot construction, the vibration of heavy interlocking paving stones, thanks to the 69 Hz frequency as well as for the backfilling of buildings. Time-tested and proven for all application areas in road and highway construction and civil engineering. Even vibrates heavy interlocking paving stones and reliably compacts very cohesive soils. Widths from 40 to 86 cm available No documentation requirement: Hand-arm vibrations (HAV) are below 2.5 m/s² thanks to the vibration-reduced center pole. Without changing your grip: change travel direction or travel speed by reversing the handle. Safe in every case: If the control handle is released, the unit only vibrates on the spot. Compatec compaction display: It indicates when the maximum compaction has been achieved with the unit. 08 Low hand-arm vibrations Unit operation without any time restrictions Learn more at:

6 Heavy-weight reversible vibratory plates With the DPU80, DPU90 and DPU110 models, we offer you a finely scaled selection within the range of heavy vibratory plates. So you always have exactly the compaction performance that you need. And independently, for whichever equipment you choose: in terms of operator friendliness, all models are equally convincing. Better protection of center pole and hood when relocating by the lifting point rotated by 90 Water-cooled engine for significantly reduced noise emissions and a very efficient engine cooling DPU80 DPU90 DPU110 Power output (kn) Weight (kg) 756 / / / 830 Operating width (mm) 670 / / / 970 Virtually vibration-free guide handle allows working without time restriction hinged for intuitive directional changes and higher level of safety Available as an option: machine protection (adjustable behavior in case of overload) or Compatec (includes machine protection) Large air cleaner for long engine running times and maintenance intervals Sturdy hood made of a tubular frame and steel plates, split and hinged, durable as well as optimally designed for all maintenance work Large, easily accessible fuel tank with visible fill level; sufficient for approx. 4 hours of continuous operation Quick release of the center pole by means of a foot lever and immediate return to the previous operating position: ideal for trench shoring 830 mm Thanks to low height, particularly suitable for heavy, cohesive soils and in trench shoring especially for long-time application. Open base plate: easy to clean without the risk of damaging the hydraulic hoses Large, easily accessible tie-downs and therefore less transport damage Clearly arranged operator panel: electronic operating displays and configurations, e.g. for overload protection, anti-theft PIN as well as error memory. Easily release of the center pole lock via pedal. At a glance: the LED lights of the compaction control Compatec show you the degree of compaction. Simply fold up the hood, then all control and maintenance points are easily accessible

7 Heavy remote-controlled vibratory plates Direction change with simultaneous travel: for clean turning of curves and a high compaction performance. The DPU80r and DPU110r remote-controlled vibratory plates allow for safe work and sensitive control at all times. DPU series: Benefits at a glance No load from hand-arm vibration or exhaust fumes to the operator thanks to the distance to the vibratory plate High level of safety: The equipment remains stationary if clear line of sight is lost Long engine running time and maintenance intervals due to large air cleaners Durable and optimum for all maintenance work: robust hood made of tubular frame and steel plates, split and hinged Optimum for application in trench shoring due to low height Less transport damage due to large, easily accessible tie-downs Easy cleaning without damage to hydraulic hoses, thanks to the open base plate Large, easily accessible fuel tank with a visible fill level, sufficient for about 4 hours of continuous operation Integrated machine protection, adjustable behaviour in case of overload: Warning indicator, reduction of engine speed or shutdown Innovative infrared remote control ensures high level of safety for operators and the environment. Therefore, the operator can stand safely outside the trench, protected from vibration, dust and noise. DPU80r DPU110r Power output (kn) Weight (kg) 709 / / 810 Operating width (mm) 670 / / 970 Far-reaching control: A transmission field of up to 20 meters and an angle of 45 guarantee a high level of working comfort. Coverage in m High level of safety: It automatically stops if there is no clear line of sight between the operator and the compaction equipment. Remote control for high operating comfort and sensitive stepless control. Full service accessibility in a few simple steps. The water-cooled engine is especially quiet in operation. Intelligent proximity recognition sensor: The machine stops automatically when the minimum safety distance between the operator and machine is less than 2 m. 2 m 12 13

8 DPU130r The DPU130r is the most powerful vibratory plate on the market and exceeds all expectations: Its compaction performance approaches that of a 7-ton roller. Thanks to the remote control, you can also compact places with the DPU130r that are difficult to access. DPU130r Power output (kn) 130 Weight (kg) 1,170 Operating width (mm) 1,202 A high level of safety due to infra-red remote control with a proximity recognition sensor and automatic shutdown if the line of sight is lost Overload sensor to protect against damage to the equipment Offers a compaction performance like a 7-ton roller and can also be used in twisting and winding areas due to the high level of maneuverability. On-board computer for comfort functions, such as anti-theft protection or extensive diagnostic options Very simple maneuvering thanks to the unique, two-part base plate, e.g. along manhole covers and other obstacles Large, easily accessible tie-downs and therefore easier securing and less transport damage The best service access simply fold back the cover. A low loader is not necessary: The DPU130r only weighs 1,200 kg and can be transported on a truck bed. Excellent steering: infinitely variable speed adjustment with simultaneous high reaction speed. High level of safety: trouble-free operation of up to three machines simultaneously

9 The right solution for every type of ground and application area. Water tank (liters) Transport device Paving pad Protective cage The most lightweight, reversible vibratory plate convinces not only in gravelly sand beds: the WPU1550. The Compatec display for the models from 45 kn will provide you with information about the compaction progress. ACCESSORIES FOR VIBRATORY PLATES VP1030A (9) VP1030Aw (9) VP1135A (9) VP1135Aw (9) VP1340A (9) VP1340Aw (9) VP1550A (9) VP1550Aw (9) VP2050A (9) VP2050Aw (9) WP 1540A (11) WP 1540Aw (11) WP 1550A (11) WP 1550Aw (11) DPS 1850H Asphalt (11) DPS 1850H Basic/Vario (11) WPU 1550A (12) WPU 1550Aw (12) A good result for asphalt work thanks to the efficient sprinkler system. Remote controlled: the most powerful vibratory plate on the market: DPU130r. Set of extension plates in various widths Transport device Paving pad BPU 2540A No familiarization period necessary: Operation of the remote control is almost self-explanatory. ACCESSORIES FOR VIBRATORY PLATES DPU 2540H DPU 2550H DPU 2560H / DPU 2560Hts BPU 3050A DPU 3050H / DPU 3050He DPU 3060H / DPU 3060Hts DPU 3070H DPU 3750Hts / DPU 3750Hets DPU 3760Hts / DPU 3760Hets DPU 4045Ye DPU 4545H / DPU 4545He / DPU 4545Heap BPU 5545A DPU 5545H / DPU 5545He / DPU 5545Heap DPU 6555H / DPU 6555He / DPU 6555Hec DPU 80 DPU 90 DPU 110 DPU 80r DPU 110r DPU 130r 16 not available available integrated 17

10 Technical data of the vibratory plates VP1030 VP1135 VP1340 VP1550 VP2050 WP1540 WP1550 DPS1850 DPS1850 DPS1850 WPU1550 Basic Vario Asphalt BPU- & DPU SERIES KN BPU & DPU SERIES 25, 30, 37 KN VP SERIES SPECIFICATION UNIT 10 kn 11 kn 13 kn 20 kn Weight kg * * * * * Centrifugal force kn Operating width mm Frequency Hz Engine Honda GX 120 Honda GX 120 Honda GX 160 Honda GX 160 Honda GX 160 Rated power at 3,600 rpm kw SPECIFICATION UNIT * * Honda GX 160 Honda GX kn Hatz 1 B 20 Hatz 1 B 20 Hatz 1 B BPU2540 DPU2540 DPU2550 DPU2560 BPU3050 DPU3050 DPU3060 DPU3070 BPU3750 DPU3750 DPU kn 30 kn 37 kn Weight kg * Centrifugal force kn Operating width mm Vertical clearance mm Frequency Hz Engine Honda GX 160 Hatz 1 B 20 Hatz 1 B 20 Hatz 1 B 20 Hatz 1 B 30 Hatz 1 B 30 Hatz 1 B 30 Hatz 1 B 30 Hatz 1 B 30 Hatz 1 B 30 Hatz 1 B 30 Rated power kw 3.1 (at 2,840 rpm) 3.1 (at 2,800 rpm) 3.1 (at 2,800 rpm) 3.1 (at 2,800 rpm) 4.2 (at 2,800 rpm) 4.2 (at 2,800 rpm) 4.2 (at 2,800 rpm) 4.2 (at 2,800 rpm) 4.2 (at 2,800 rpm) 4.2 (at 2,800 rpm) 4.2 (at 2,800 rpm) Options Top Speed Version Electric starter SPECIFICATION UNIT Electric starter, Top-speed version Electric starter, Top-speed version DPU4045 DPU4545 BPU5545 DPU5545 DPU6555 DPU80 DPU90 DPU110 DPU80r DPU110r DPU130r 40 kn 45 kn 55 kn 65 kn 80 kn 90 kn 110 kn 80 kn 110 kn 130 kn Weight kg * * * * * * * * 1,170 Centrifugal force kn Operating width mm / x / / / / /970 1,202 Vertical clearance mm Frequency Hz Engine Yanmar L70N Hatz 1 D 42S Honda GX 390 Hatz 1 D 42S Hatz 1 D 81S Kohler 702 Kohler 702 Kohler LDW 1003 Kohler LDW 702 Kohler LDW 1003 Kohler KDW 1404 Rated power kw 4.5 (at 3,000 rpm) 6.4 (at 2,850 rpm) 6.4 (at 2,600 rpm) 6.4 (at 2,850 rpm) 9.6 (at 2,800 rpm) 11 (at 3,600 rpm) 11.7 (at 3,600 rpm) 16 (at 3,600 rpm) 11 (at 3,600 rpm) 16 (at 3,600 rpm) 21 (at 2,700 rpm) Options Electric starter standard, operating hour meter Compatec, operating hour meter Electric starter, Electric starter, Compatec, operating Compatec, operating hour meter, extra-wide hour meter, extra-wide extension plates, narrow extension plates protective cage WP SERIES Overload protection, Compatec including overload protection; standard with electric starter and operating hour meter Overload protection, Compatec including overload protection; standard with electric starter and operating hour meter DPS SERIES Overload protection, Compatec including overload protection; standard with electric starter and operating hour meter Overload protection, Compatec including overload protection; standard with electric starter and operating hour meter Overload protection, Compatec including overload protection; standard with electric starter and operating hour meter WPU SERIES * Honda GX Electric starter, Top-speed version Standard with electric starter, operating hour meter and overload protection not available * Weight depends on the additional options selected The Wacker Neuson product range includes over 300 different product series with different variants. The product data may vary accordingly with the selection of different options. However, not all Wacker Neuson products listed or shown here are available or allowed in all countries. The Wacker Neuson products shown are examples and as such are subject to changes, we will be happy to give you a specific offer upon request! Reproduction only with the written approval of Wacker Neuson. Wacker Neuson Vertrieb Europa GmbH & Co.KG 18 19

11 Your everyday work is full of challenges. We have the right solutions and help you to stay ahead of the competition. We offer you everything you need for this purpose: Wacker Neuson all it takes! Products Concrete technology Compaction Demolition technology Excavators Wheel loaders Telehandlers Dumpers Generators Lighting Pumps Heaters Used equipment Services rendered Spare parts Financing Repair & maintenance Academy Rental Telematics The concrete specialists E-store *WN.EMEA V03.EN-US* WN.EMEA V03.EN-US 04/2017 EN