Science. Safety. Solutions.

Transcription

1

2 Since 1959, Mystaire has been at the forefront of the environmental safety and air pollution control industry. Our ductless fume hoods and filtered chemical workstations are a safe and cost-effective alternative for protecting laboratory workers from hazardous materials. In order to ensure maximum protection, Mystaire manufactures each ductless fume hood, filtered chemical workstation and laminar flow workstation to the highest safety standards in the industry. Every component must pass rigorous inspection in order to make it to the production floor. Our products are constructed from materials that meet the application challenges by providing strength, durability and corrosion resistance. All electrical components are encased in vapor-sealed housings for added safety. The quality, workmanship, and performance of a Mystaire safety product is unsurpassed. In addition to the excellent quality of our equipment, our engineering support and customer service are second to none. Customers who purchase Mystaire products are not only purchasing rigorously field-tested hoods, workstations and enclosures but also accessing over 50 years of industry experience. Mystaire s experience in the containment of toxic chemicals and particulate has helped us to maintain an extensive application database for which our ductless and filtered systems can provide a practical and safe environment. Our team is here to help you find the perfect safety product for your current and future laboratory needs. Science. Safety. Solutions.

3 Table of Contents EverSafe III TOUCH Controller Filtration Technology Aura Elite Ductless Fume Hoods... 8 Isola Series Filtered Workstations Basic Chemical Workstation Downflow Workstation Latitude 36 Balance Enclosure MY-PCR Prep Station CleanPrep Dead Air Box Vertical Laminar Flow Workstation Horizontal Laminar Flow Clean Bench Criminal Investigation Tools SecureDry Evidence Drying Cabinets Cyanoacrylate Fuming Chambers Fume Extractor Room Air Purifier Accessories

4 EverSafe III Controller EverSafe III TOUCH Control Advanced Microprocessor Safety Controller The EverSafe III TOUCH Control advanced microprocessor safety controller is designed to enable simple and precise user control of all hood or workstation functions. EverSafe III has 18 primary control icons that allow the end user to view and/or modify the hood or workstation settings. The primary home screen features display of face velocity to show users they are working within OSHA requirements. Face velocity is vividly displayed in either linear feet per minute or meters per second. The lower portion of the EverSafe III TOUCH controller screen is designed to give the following information to the end user; current date, time and blower setting. EverSafe III TOUCH control maintains fume hood or workstation face velocity by taking constant measurements at the opening and automatically adjusting airflow to ensure compliance to user preset values. The end user is allowed to determine desired face velocity through the Blower Settings icon. Mystaire calibrates and ships each ductless hood and filtered workstation with a preset face velocity of 80 linear feet per minute or.4 meters per second. Sophisticated electronic controls determine chemical breakthrough based on the type of solvents used within the hood or workstation. Visible and audible alarms alert the operator if airflow is at an unsafe level or if the installed filters are approaching saturation, allowing sufficient time to replace filters. Screen 1 Screen 2 The EverSafe III TOUCH control microprocessor safety controller allows the end user to select the built-in solid state gas detection package sensitivity. The solid state gas sensor can be set at three distinct levels that correspond to established occupation levels. A sensitivity level set point should be selected by the end user that is appropriate with the TLV for the current chemical being manipulated. This provides the end user with an audible and visual alarm that indicates the primary installed filtration has reached saturation and allows the installed safety filtration to protect the end user during experimentation shutdown. EverSafe III TOUCH control displays current installed filtration within the hood or workstation and provides a bar graph consumption monitor to show filter life. The FILTERS icon, when pressed, displays the following filtration type; main, safety and pre-filter. Additionally, the end user can select and change the three types of filters independently of the others. Energy monitoring is standard with EverSafe III TOUCH control and continues to become a focal point of every laboratory. Cost of operation is a focal point in every business s operational budget. EverSafe III TOUCH control allows end user display of hood or workstation energy consumption through the ENERGY USE icon. Displayed to the end user is a log of energy consumption, by the ductless hood or workstation, of the life time kilowatt hours and real time power/current/voltage. 4

5 EverSafe III Controller Icons EverSafe III TOUCH Control Advanced Microprocessor Controller gives the end user complete control of all hood or workstation functions and features with one touch of an Icon. Absolute power at your fingertip! Stop Blower BLOWER - Manually start and stop blower. Date/Time DATE/TIME - Allows the end user the ability to change or modify current time and date. LIGHT - Turns LED lightning on or off. TEMPERATURE/HUMIDITY - Displays current temperature inside the chamber and filtration housing as well as current humidity. Timer TIMER - Provides the end user with the ability to set the lab timer in either stopwatch or countdown mode. Also allows the user to set length of time for the countdown mode. ALARMS - Allows end user to set alarm points for airflow, temperature, humidity and filter saturation. Energy Use ENERGY USE -This icon accesses the log of energy consumption. Displaying life time kilowatt hours and real time power/current/voltage. Turn Light On System Data Filters Help Settings Change Filters SYSTEM DATA - Access to serial number, software version and hour meters for system run time, blower run time, light burn time. Provides an overview of all historical data (excluding energy use). FILTERS - Allows easy access to installed filtration package identification numbers. HELP - Provides contact details for Mystaire customer service. SETTINGS - Allows the end user to access the workstation administration functions, enabling them to modify or change current settings. CHANGE FILTERS - Allows the user to select and change specific expired installed filters. Alarms Units & Language UNITS/LANGUAGE - Allows the end user to switch between supported languages and units of measure; imperial or metric. Calibrate Airflow Sensor CALIBRATE AIRFLOW SENSOR Provides step-by-step instruction for automatic calibration of airflow sensor. Backup / Restore Calibrate Screen Filter / Application Blower Settings Science. Safety. Solutions. BACKUP/RESTORE - Allows the end user to save system settings and restore saved settings. CALIBRATE SCREEN - Allows the user to calibrate the color LCD touch screen. FILTER APPLICATION - Allows user or administrator to validate current class of chemicals used with the installed filters. If the chemical class and installed filter(s) are not correct an alert is provided. BLOWER SETTINGS - Set blower to either manual or automatic mode. Manual mode is a percent of blower capacity. Automatic mode maintains a desired face velocity that can be entered using the touch screen. 5

6 Filtration About Mystaire Filtration Proper filtration selection is critical to ensure operator safety from potentially harmful odors, vapors and airborne particulate. When selecting a filter for your application, Mystaire reviews the complete application to make certain the proper filtration package is selected. At our state-of-the-art facility in Creedmoor, North Carolina, Mystaire filters are manufactured to the strictest quality standards in the industry. Our filters have undergone thorough laboratory testing to ensure their capability to meet your application challenges. Depending on your application, Mystaire filtration solutions may be a single adsorption technology or the combination of a variety of filtration media to meet your containment requirements. Particulate Pre-filters The particulate pre-filter is an electrostatically charged fiber filter which effectively removes submicron particulates. When used in Mystaire fume hoods and workstations, the pre-filter protects the adsorption filter from smoke, acid mists, and other submicron particulates. In the forensic evidence drying cabinets, the pre-filter prevents airborne contaminants from entering into the drying chamber, minimizing the potential for cross contamination from the environment. All units are typically shipped with pre-filtration installed. Trace Evidence Filter The trace evidence filter is an electrostatically charged fiber filter that is designed to remove submicron particulate, i.e. hairs, fibers and dirt particles that might be freed during the drying process. The trace filter should be removed between cases for laboratory analysis and to reduce the potential for cross contamination between cases. The trace filter is positioned in the exhaust stream and will capture potential airborne trace evidence before entering the main filtration zone. Activated Carbon Filters Mystaire activated carbon filters consist of high-grade coconut shell carbon. The steam-activated nutshell provides a large surface area with an extensive internal pore structure for a high degree of absorbency. Mystaire activated carbon filters are effective in adsorbing typical chemicals used in routine forensic analysis such as acetone, methanol, ethanol, chloroform, xylene and ninhydrin. Chemisorptive Carbon Filters Mystaire chemisorptive carbon filters are used to remove lighter weight gases that are not physically adsorbed by activated carbon alone. Added to these filters is an impregnate, which utilizes a chemical and physical attraction to enhance adsorption. A typical application for chemisorptive filtration is in an evidence drying cabinet, for the containment of fumes and gases generated and released during the process of decomposition (i.e. putrid odors). HEPA Filters High Efficiency Particulate Air (HEPA) filters are available in various efficiencies to contain a variety of airborne contaminants present when examining or drying evidence. Our standard HEPA filter has a % efficiency rating for collecting 0.3 micron particles. HEPA filters capture potentially harmful particulate (e.g. powders present during fingerprint analysis) and blood borne pathogens (that may be released during evidence drying). 6

7 Advanced Filtration Technology for Safe Environments A unique state-of-the-art adsorption technology combines a particulate pre-filter with either chemisorptive carbon or activated carbon. Filter selection depends on the type of contaminant to be removed. Multiple filtration technologies are utilized to effectively handle a wide range of applications. Mystaire filter performance has been verified by Fourier Transform Infrared Spectroscopy analysis (FTIR). CHEMICAL FILTER 1,8-Diazafluoren-9-one... A/C Acetaldehyde...FOR Acetic Acid... A/C Acetic Anhydride... A/C Acetone... A/C Acrolein...FOR Acrylic acid... A/C Amines - low MW...AMN Amines - high MW...AMN Ammonia (dilute)... AMN Ammonium Hyrdoxide...AMN Amyl acetate... A/C Aniline... A/C Animal odors... A/C Ardrox dye... A/C Basic yellow... A/C Benzaldehyde... A/C Benzene... A/C Butyric acid... A/C Butyl alcohol... A/C Butyl acetate... A/C Butyl chloride... A/C Camphor... A/C Carbon disulfide... A/C Carbon dioxide... * Carbon monoxide... * Carbon tetrachloride... A/C Cellosolve... A/C Chlorine...ACI Chlorobenzene... A/C Chloroform... A/C Chloro nitropropane... A/C Cyanoacrylate... A/C Crotonaldehyde... A/C Cyclohexane... A/C * Not well adsorbed CHEMICAL FILTER CHEMICAL FILTER CHEMICAL FILTER Cyclohexanol... A/C Cyclohexanol... A/C Dibromoethane... A/C Dichlorobenzene... A/C Dichloro ethyl ether... A/C Dichloromethane... A/C Diethyl amine...amn Diethyl aniline... A/C Diethyl ether... A/C Diethyl ketone... A/C Dimethyl amine...amn Dimethylformamide... A/C Dimethyl sulfate... A/C Dioxane... A/C Dipropyl ketone... A/C Ethyl acetate... A/C Ethyl acrylate... A/C Ethyl amine...amn Ethyl bromide... A/C Ethyl chloride... A/C Ethylenechlorohydrin... A/C Ethyl mercaptan... SUL Flurotrichloro-methane... A/C Formaldehyde...FOR Formic acid... A/C Gasoline... A/C Glutaraldehyde...FOR Halothane... A/C Heptane... A/C Heptylene... A/C Hexane... A/C Hexylene... A/C Hospital odors... A/C Hydrogen bromide...aci Hydrochloric acid...aci Hydrofluoric acid...aci Hydrogen iodide...aci Hydrogen sulfide... SUL Iodine... A/C Iodoform... A/C Indole... A/C Isopropyl alcohol... A/C Isopropyl acetate... A/C Kerosone... A/C Lactic acid... A/C Mercaptans - high MW... SUL Mesityl oxide... A/C Methylamine...AMN Methyl ether... A/C Methyl ethyl ketone... A/C Methyl formate... A/C Methyl isobutyl ketone... A/C Methyl (methanol)... A/C Methyl methacrylate... A/C Methylene chloride... A/C Monochlorobenzene... A/C N-decane... A/C N-heptane... A/C N-nonane... A/C N-octane... A/C Napthalene... A/C Nicotine... A/C Ninhydrin... A/C Nitric acid...aci Nitrobenzene... A/C Nitroethane... A/C Nitrogen dioxide...aci Nitromethane... A/C Nitropropane... A/C Nitrotoluene... A/C Contact Mystaire at or if you have any questions regarding your application. To submit your application online, visit and request a quote. Osmium tetroxide... A/C Ozone... A/C Palmitic acid... A/C Particulates...HEPA Pentanone... A/C Perchloroethylene... A/C Perfumes... A/C Phenol... A/C Proprionic acid... A/C Propyl alcohol... A/C Propyl chloride... A/C Putrescine... A/C Pyridine...AMN Resins... A/C Rhodamine... A/C Silver nitrate... A/C Styrene monomer... A/C Sulfur dioxide...aci Sulfuric acid...aci Tetrachloroethane... A/C Tetrachloroethylene... A/C Tetrahydrofurane... A/C Tetrahydrothiopene... A/C Toilet odors... A/C Toluene... A/C Toluidine... A/C Urea...AMN Uric acid... A/C Valeraldehyde... A/C Valeric acid... A/C Vinyl chloride... A/C Xylene... A/C LEGEND A/C General Carbon FOR Glutaraldehyde ACI Inorganic Acids AMN Ammonia and Amine Compounds Science. Safety. Solutions. 7

8 Aura Elite Ductless Fume Hood Superior Protection from Fumes, Vapors and Particulate Aura Elite is the next advanced solution for ductless fume hood technology. For over 15 years Mystaire Aura ductless fume hoods have provided customers with market leading safety features and reliable service. The new Aura Elite includes the latest in microprocessor-based controls, including constant monitoring of fume hood face velocity, gas phase filtration saturation, temperature and humidity monitoring, along with instantaneous filter to chemical application validation. Each of these features is vividly displayed and controlled by the EverSafe III touch screen controller, which offers user s finger-tip control. Features: EverSafe III touch screen controller constantly monitors fume hood performance with audible and visible alarms Large icon display for simple touch control of hood functions Variable airflow control with automatic airflow sensor calibration no service technician required Solid state gas detection with three level sensitivity selection Temperature and humidity sensor to monitor filter performance and environmental conditions Fiberglass spill tray LCD readout of airflow in linear feet per minute or meters per second Built in filter and application validation by chemical classification Conforms to UL, CSA and CE Lab event time- count down and elapsed time Face Velocity 90 LFM Stop Blower Turn Light On Timer Energy Use MY-AU42 with optional mobile cart pictured System Data Filters Help 16 JUN : 18 : 24 PM Settings Blower: Auto EverSafe III Touch Controller provides simple and effective control of all fume hood operations. MY-AU30 MY-AU42 MY-AU54 30 Aura Elite Ductless Fume Hood 42 Aura Elite Ductless Fume Hood 54 Aura Elite Ductless Fume Hood 8

9 Isola EDGE Dual-Wall Design Look and feel of a conventional hood only with filtration Isola EDGE Filtered Chemical Workstation was designed and engineered to provide the end user with superior filtration while offering the same conveniences found on traditional laboratory hoods. The main chamber is dual-wall thermally-fused solid polypropylene allowing the installation of common laboratory fixtures and electrical outlets, if needed. The main chamber, made from structural polypropylene, offers superior chemical resistance while the contoured entry foil provides both spill containment and smooth airflow dynamics. The angled and rolled entry design of the Isola EDGE promotes a smooth, turbulent-free work area which reduces eddy currents that affect containment. Features: EverSafe III TOUCH Control with electronic monitoring of face velocity, filter saturation, temperature and humidity with audible and visible alarms Vividly displayed status of face velocity in linear feet per minute or meters per second 18-Icon display for simple touch control of hood features and functions LED lighting for true illumination of the entire work area Three stage filtration to confirm to SEFA DHIII recommendations Dual-wall, thermally-fused structural polypropylene construction Variable airflow control with automatic airflow sensor calibration Solid state gas detection with three sensitivity set points Integral polypropylene spill basin with rolled foil entry Built-in filter and application validation Optional installation of gas, water, electrical fixtures Optional installation of polypropylene sink Available in 36, 48 and 72 inch widths with a nominal depth of 28 inches 110V or 220V AC Conforms to UL, CSA and CE electrical requirements Isola Filtered Chemical Workstations meet and exceed relevant OSHA and ANSI Z9.5 guidelines and standards Isola EDGE shown with optional polypropylene base cabinet MY-ISL36P2 MY-ISL48P2 MY-ISL72P2 Isola EDGE 36" ductless filtered chemical workstation Isola EDGE 48" ductless filtered chemical workstation Isola EDGE 72" ductless filtered chemical workstation Science. Safety. Solutions. 9

10 Isola PRO Filtered Workstation Chemical-resistant construction with superior filtration Isola PRO polypropylene filtered chemical workstation removes toxic particulate, chemical fumes and vapors protecting both the operator and the environment. Isola PRO polypropylene filtered workstations, standard with a thermally-fused integral spill tray, offer excellent chemical resistance for corrosive applications. Isola PRO polypropylene filtered chemical workstations allow for a wide range of applications. The Isola Series of filtered chemical workstations have been designed to accommodate up to six-inches of filtration. The design of Isola s filtration matrix allows for stacking of a HEPA filter, followed by a gas-phased carbon filter, thus allowing the workstation to effectively remove both toxic particulate and chemical fumes and vapors. For high evaporation or multiple chemical applications, a full six-inch stack of gas phase carbon filtration may be incorporated. Isola PRO offers the end user and laboratory many options for fume containment as well as flexibility in laboratory design. Features: EverSafe III Touch Control with electronic monitoring of face velocity, filter saturation, temperature and humidity with audible and visible alarms Vividly displayed status of face velocity in linear feet per minute or meters per second 18-Icon display for simple touch control of hood features and functions LED lighting for true illumination of the entire work area Three-stage filtration to confirm to SEFA DHIII recommendations Single-wall, thermally-fused structural polypropylene construction superior chemical resistance Variable airflow control with automatic airflow sensor calibration Solid-state gas detection with three sensitivity set points Integral polypropylene spill basin with rolled foil entry Built-in filter and application validation Optional installation of polypropylene sink Available in 36, 48 and 72 inch widths with a nominal depth of 28 inches 110V or 220V AC Conforms to UL, CSA and CE electrical requirements Isola Filtered Chemical Workstations meet and exceed relevant OSHA and ANSI Z9.5 guidelines and standards MY-ISL48P shown with optional polypropylene base cabinet MY-ISL36P MY-ISL48P MY-ISL72P Isola PRO 36" ductless filtered chemical workstation Isola PRO 48" ductless filtered chemical workstation Isola PRO 72" ductless filtered chemical workstation 10

11 Isola Vue Filtered Workstation 360-degree visibility for experiment observation Isola Vue filtered chemical workstation offers a 360 clear viewing area which makes it ideal for demonstration experiments. The clear polycarbonate shell protects both the end user and observers during classroom demonstrations. Each Isola Vue filtered chemical workstation comes standard with an integral polypropylene base and contoured spill lip for ergonomics and comfort. The polypropylene base, both chemical-resistant and easy-to-clean, will not break down when exposed to harsh chemicals or routine solvents used for cleaning. Features: EverSafe III Touch Control with electronic monitoring of face velocity, filter saturation, temperature and humidity with audible and visible alarms Vividly displayed status of face velocity in linear feet per minute or meters per second 18-Icon display for simple touch control of hood features and functions LED lighting for true illumination of the entire work area Three-stage filtration to confirm to SEFA DHIII recommendations Polycarbonate construction for 360 degree visibility excellent for demonstrations Variable airflow control with automatic airflow sensor calibration Solid-state gas detection with three sensitivity set points Integral polypropylene spill basin with rolled foil entry Built-in filter and application validation Optional installation of polypropylene sink Available in 36, 48 and 72 inch widths with a nominal depth of 28 inches 110V or 220V AC Conforms to UL, CSA and CE electrical requirements Isola Filtered Chemical Workstations meet and exceed relevant OSHA and ANSI Z9.5 guidelines and standards MY-ISL48 shown with optional mobile stand MY-ISL36 MY-ISL48 MY-ISL72 Isola Vue 36" ductless filtered chemical workstation Isola Vue 48" ductless filtered chemical workstation Isola Vue 72" ductless filtered chemical workstation Science. Safety. Solutions. 11

12 Basic Workstation Versatile and Portable Containment The MY 2400 is a compact, economical solution for capturing fumes and particulate during routine investigative analysis. This lightweight model is constructed from durable materials that provide excellent durability in typical laboratory environments. The clear base section is constructed from ¼ polycarbonate with a hinged front sash. This workstation is ideal for low volume applications found in laboratories. The MY 2400 Basic Ductless Workstation is equipped with an adjustable air speed controller. Face velocity can be adjusted from fpm. This feature allows the operator to control face velocity depending on the type of sample being manipulated within the workstation. Features: User-controlled variable air volume, fpm Full access sash opening 360 clear construction for optimal visibility Vapor proof fluorescent light Options: Polypropylene spill tray 110V/220V models available Typical Applications: Sample prep Solvent cleaning Forensics Molecular biology Tissue staining Metal etching Pathology Fan Filter MY-2400 pictured with optional spill tray How the Basic Ductless Workstation works: Laboratory Room Air enters at A where it mixes with the contaminant at B before entering into the filtration zone at C. Contaminant-free air is returned to the laboratory at D. MY Basic Ductless Chemcial Workstation, filters sold separately 12

13 Downflow Workstation Compact and Open Design Mystaire Downflow Workstations are designed as stand alone, ductless units that protect workers from powders or fumes. The workstation s open design allows for close inspection of samples while maintaining a high level of operator protection. Particles or fumes are drawn downward through the stainless steel work surface and contaminants are removed by a series of filters. After the fumes or particulates are filtered, clean air is returned to the room. Features: Durable aluminum frame Corrosion resistant powder-coated exterior Stainless steel work surface Internal fluorescent light Automatic filter monitoring and alarm 110V/220V models available Typical Applications: Histology Microscopy Latent fingerprint dusting Dissections Biology Cover slipping Tissue cutting Slide staining Fan FE-WS-6 Downflow Workstation Filtration Zone How the WS-6 works: Laboratory air is pulled into the removable stainless steel work surface at A and then contaminated air passes through an electrostatic pre-filter at B before entering into the main filtration zone at C. Clean, contaminant free air is released back into the laboratory space at D. Note: Filtration zone at C can be configured to handle either particulate or gases depending on the application requirements. FE-WS-6 Downflow Workstation, filters sold separately Science. Safety. Solutions. 13

14 Latitude 36 Precise and accurate weighing plus operator protection The Mystaire Latitude 36 ductless balance enclosure offers excellent performance for particulate containment while maximizing user access. Designed with a horizontal airflow pattern, the Latitude 36 enclosure captures potentially harmful powders and particulate and prevents them from entering the operator s breathing zone. The Latitude 36 enclosure maintains an optimal environment by providing a constant and even negative pressure within the work area. This ensures balance stability and weighing accuracy when handling potent compounds. Features: Clear view sides and top for natural light and good observation Horizontal airflow pattern for superior containment of fine particulate Removable polypropylene tray for ease of cleaning and maintenance Simple pre-filter and HEPA filter replacement Low airflow alarm No ductwork required installs in minutes, shipped fully assembled Mystaire Latitude 36 is designed to contain nuisance powders and particulate and prevent occupational exposure to the laboratory technician. Latitude 36 is an engineered controlled solution for potent powder weighing and manipulation The construction of Latitude 36 allows for exceptional operator viewing. The sides, front and top panels are constructed from polycarbonate. The HEPA filter and pre-filter are positioned directly against a solid epoxycoated steel housing. This creates a positive seal between the filter housing and the HEPA filter offering additional strength and durability. Due to the design placement of the Latitude 36 blowers, vibration is isolated resulting in accurate and stable balance performance. How Latitude 36 works: At A room air is drawn into the workstation. At B room air is used to capture airborne contaminants before being pulled into C. At C contaminated air is pulled into the filtration bed for removal of powders and particulate prior to exiting the workstation at D. At D contaminant-free air is returned to the room. HEPA Filter Blower Interlocking Folding Sash MY-LBE36 Latitude 36 Ductless Balance Enclosure 14

15 MY-PCR Prep Station Personal Cleanroom for PCR Amplification Mystaire PCR Prep Stations are compact laminar flow enclosures that reduce the risk of sample contamination while performing polymerase chain reaction experiments. Features: Class 100 vertical laminar flow air 15-Minute UV light timer Clear polycarbonate construction with chemically impervious polypropylene work surface UV shelf with integrated pipette holder Electrical cord pass-through port Sash position switch and overlap to prevent UV light exposure 110V/220V models available Note: MY-PCR is not a biological safety cabinet. It is designed ONLY to provide process protection from potential airborne contaminants found in the laboratory. PCR is a registered trademark of Hoffman-LaRoche MY-PCR32 PCR Prep Station Airborne contaminants are prevented from entering the work zone through constant positive-pressure HEPA-filtered air. Each PCR Prep Station is equipped with a built-in 254 nanometer shortwave lamp to effectively decontaminate the work area between amplifications. Safety interlocks are included on all PCR Prep Stations to prevent operator exposure to potentially harmful UV radiation. MY-PCR Prep Stations are bench-top personal clean zones allowing the operator to amplify RNA and DNA while minimizing the potential for background from airborne contaminants. How the MY-PCR works: Laboratory air is pulled into MY-PCR workstation at A and then forced through the HEPA filter at B. Smooth and even Class 100 laminar flow air enters the work area at C and then exits the workstation at D. Pre-Filter Fan HEPA Filter Fluorescent Light UV Light UV Shelf Interlocking Folding Sash Polypropylene Work Surface MY-PCR24 MY-PCR32 MY-PCR48 24 PCR Prep Station, IS0 5 Clean with Timed UV Light 32 PCR Prep Station, IS0 5 Clean with Timed UV Light 48 PCR Prep Station, IS0 5 Clean with Timed UV Light Science. Safety. Solutions. 15

16 CleanPrep Dead Air Box Circulation-free Enclosure for PCR Applications Mystaire CleanPrep Dead Air Boxes are circulation-free enclosures that establish an ideal work area to protect against contamination in sensitive PCR amplification reactions. CleanPrep Dead Air Boxes are constructed from thermally-fused polypropylene that offers exceptional chemical resistance, does not adsorb moisture and can be easily cleaned and decontaminated between amplifications using a variety of disinfectant solutions. Features: Seamless polypropylene design for easy decontamination between amplifications Clear polycarbonate access with overlap and safety position switch UV shelf with integrated pipette holder accommodates four pipettors High-intensity fluorescent lamps and shortwave UV light Available in 24, 36 and 48 inch widths with nominal 24 inch depth 110V/220V models available MY-DB24 CleanPrep Workstation with UV shelf pictured The CleanPrep PCR Workstation is designed to control three major contamination issues: 1) Reaction preparation is performed in the clean still-air chamber, thus minimizing airborne and supply- borne contamination. 2) During reaction preparation, a portion of the reaction mix is exposed to the UV light, thus decontaminating any irregular reaction components. Since this exposure bathes the chamber and its contents, they are cleaned at the same time. 3) Keeping the sash closed, the CleanPrep chamber and supplies remain ready for use. Access into the CleanPrep Dead Air Box is gained through a folding vertical polycarbonate sash. The sash is designed with an overlap to eliminate potentially harmful UV rays from escaping the enclosure. As an added safety feature, the lower portion of the sash is fitted with a position switch that controls the UV light and its ability to be turned on and off. When the polycarbonate sash is in the vertical position the UV light is disabled allowing the fluorescent light to be illuminated. Workspace illumination is important during amplifications and each CleanPrep enclosure is fitted with a high-intensity fluorescent lamp to effectively illuminate the work area. MY-DB24 MY-DB36 MY-DB48 24 Wide CleanPrep Workstation with Timed UV Light 36 Wide CleanPrep Workstation with Timed UV Light 48 Wide CleanPrep Workstation with Timed UV Light 16

17 Vertical Laminar Flow ISO 5 Sterile Environment for Handling Sensitive Materials The MY-ISO5 Series of Laminar Flow Cabinets provide an ISO 5 sterile environment for the handling of sensitive materials.the work area is continuously bathed with ISO 5 HEPA-filtered air to protect the product or application from airborne contamination. These workstations are constructed of high quality, thermal plastics to provide for ease of cleaning and maintenance. The main chamber is constructed of polycarbonate and the base is high density polypropylene. A major advantage of polypropylene is the fact that it is non-hydroscopic, non-stick and does not breakdown when exposed to harsh hard-surface disinfectants. Features: Two stage filtration- pre-filter and HEPA filter Polypropylene base Compact and lightweight design personal ISO 5 cleanroom Clear polycarbonate main chamber construction Automatic operation of blower and fluorescent light when sash is raised or lowered Pre-Filter Fan MY-VLF32 ISO 5 Vertical Laminar Flow Workstation HEPA Filter Fluorescent Light How the MY-ISO5 works: Laboratory air is pulled into MY-PCR workstation at A and then forced through the HEPA filter at B. Smooth and even Class 100 laminar flow air enters the work area at C and then exits the workstation at D. Interlocking Folding Sash Polypropylene Work Surface MY-VLF24 MY-VLF32 MY-VLF48 24 ISO 5 Vertical Laminar Flow Workstation 32 ISO 5 Vertical Laminar Flow Workstation 48 ISO 5 Vertical Laminar Flow Workstation Science. Safety. Solutions. 17

18 Horizontal Laminar Flow Smooth and Precise Horizontal Laminar Flow Air The Mystaire Horizontal Laminar Flow Clean Bench is specially designed to provide a Class 100/ISO 5 particlefree clean-air environment needed for laboratory testing, manufacturing, inspection, or pharmaceutical procedures. Precise horizontal laminar airfllow is obtained through a high-quality HEPA filter installed in the rear baffle of the cabinet. Air is forced through the HEPA filter and then enters the chamber through a diffuser that distributes clean Class 100/ISO 5 particle-free clean-air over the entire work surface. Features: Microprocessor controller Fluorescent Light Mobile stand with locking casters Stainless steel work surface Note: Mystaire horizontal laminar flow clean benches are not designed to be biological safety cabinets. How it works: Laboratory air enters at A where it is scrubbed free of gross particulate. Air is then forced through a HEPA filter at B where clean Class 100 air exhausts into the work area at C in an even horizontal laminar flow fashion. Fan Controller HEPA Filter MY-HLF4U pictured with sturdy mobile stand The work surface on each Mystaire horizontal laminar flow clean bench is constructed from stainless steel for easy cleaning and decontamination. The solid, stainless-steel work surface combined with ultra-smooth horizontal laminar air flow creates an ideal environment when handling critical component inspections, assembling optical components or working with pharmaceutical ingredients. MY-HLF4U MY-HLF6U 42 Wide Horizontal Laminar Flow Clean Bench with Stand, 110V AC 56 Wide Horizontal Laminar Flow Clean Bench with Stand, 110V AC 18

19 Criminal Investigation Tools Mystaire, for more than five decades, has been the established leader in the development of criminal investigation tools for the crime laboratory. We provide effective and reliable products that aid in the processing and preservation of evidence from crime scene to courtroom. Mystaire manufactures a complete range of hoods, workstations, enclosures, cabinets and chambers. SecureDry Evidence Drying Cabinets Cyanoacrylate Fuming Chambers Air Purifier...24 Fume Extractor...24 Accessories

20 SecureDry Maintain the Chain of Custody and Protect Your Evidence SecureDry evidence drying cabinets are designed to provide a secure and dedicated area for drying wet evidentiary items while creating a barrier to keep out the potential threat of cross contamination. The cabinet utilizes pre-filtration, HEPA and carbon filtration to minimize the potential for environmental cross contamination and employee exposure to putrid odors or biological material. SecureDry is constructed from rigid white polypropylene that is thermally fused in order to create a continuous chamber, eliminating structural cracks and crevices. The elimination of cracks and crevices allows for ease of cleaning and maintenance between cases and minimizes the potential for bio-burden buildup. An optional timed 254 nanometer UV light is available for chamber irradiation, further reducing crosscontamination risk. Features: Seamless polypropylene construction with blue epoxy-coated steel door Stainless steel drying rod and removable shelves Four-stage filtration including dual pre-filtration, HEPA filtration and gas phase filtration Locking casters for added mobility Two-speed blower operation airflow is increased when door is opened Notification lights alert operator for pre-filter and main filtration changes Options: Modular waste removal pump with timed shut-off Removable UV light with timer for cabinet irradiation MY-FDR64 SecureDry Evidence Drying Cabinet 20

21 Evidence Drying Cabinets Added security comes from the powder coated steel doors with keyed entry, not found on other drying cabinets. This reinforced steel door is designed to provide a tamper resistant barrier while creating a positive seal between the chamber and the environment, minimizing the potential for cross contamination. In addition to the door pre-filter, within the drying chamber is a second pre-filter. This pre-filter is referred to as a trace evidence filter and is designed to trap any potential evidence that may become airborne during the drying process. All drying air must pass through the trace evidence pre-filter before leaving the drying chamber. This filter should be changed between each case and retained for further analysis by laboratory professionals. By drying crime scene evidence with SecureDry you keep your occupational exposure to potentially harmful biological material to a minimum. SecureDry Protecting the evidence and law enforcement professional from both the known and unknown. MY-FDR32 SecureDry Evidence Drying Cabinet Seamless polypropylene construction for easy cleaning between cases. Stainless steel shelves and hanging rod are standard. MY-FDR32 MY-FDR48 MY-FDR64 MY-FDR64D MY-FDR72 MY-FDR72D MY-FDR10 MY-FDR20 MY-FDR76 32 SecureDry Evidence Drying Cabinet 48 SecureDry Evidence Drying Cabinet 64 SecureDry Single Chamber Evidence Drying Cabinet 64 SecureDry Dual Chamber Evidence Drying Cabinet 72 SecureDry Single Chamber Evidence Drying Cabinet 72 SecureDry Dual Chamber Evidence Drying Cabinet Optional Modular Waste Pump with Timed Shut Off Optional Shortwave UV Light Kit for SecureDry Solucide Cleaner and Disinfectant, oz. Pump Spray Bottles Science. Safety. Solutions. 21

22 Cyanoacrylate Chambers Safely Fume Evidence with Consistent Results Mystaire CA Series cyanoacrylate fuming chambers are the standard by which automated latent print development chambers are measured. The patented* recirculation filtration system with precise process controls for time, temperature and humidity put Mystaire CA chambers in a class of their own. The CA Series is constructed from powder coated aluminum with an automatically locking safety glass viewing door. Microprocessor control allows the operator to set fuming cycle time and relative humidity levels between 50-80%. Using the CA Series is simple; position the non-porous evidence inside the chamber, add cyanoacrylate to the heating element and push the start button to begin fuming. The evidence technician can set fume cycle time and relative humidity via the simple-to-use microprocessor controller. During the fume and purge process the aluminum door automatically locks to prevent exposure to potentially harmful cyanoacrylate. Our exclusive, patented* filtration process ensures potentially hazardous cyanoacrylate fumes, that are generated during the fuming process, are effectively removed during the purge cycle. The cyanoacrylate-laden chamber air is not exhausted into the room like other brands of cyanoacrylate fuming chambers. The air is recirculated through a specially blended activated gas phase filtration bed until the cyanoacrylate fumes are removed. Our patented method for capturing potentially harmful cyanoacrylate fumes is more effective than the single-pass filtration method incorporated by other chamber designs. CA-3000 Cyanoacrylate Fuming Chamber * U.S. Patent No. 6,660,054 Microprocessor Controller Features: Fully automated, user programmable development system LCD display of fuming options and development system parameters Accurate, user-programmable control of relative humidity from 30-80% User-definable fuming cycle length Internal circulation fan is user programmable promotes even cyanoacrylate vapor distribution within chamber 110V and 220V AC configurations The Results! 22

23 Cyanoacrylate Chambers Best In Class Safety Features: Patented, recirculatory filtration design (US Patent # 6,660,054) Specialized blended gas phase filtration media for cyanoacrylate Door automatically locks during development and purge cycles Constant filter life monitoring of pre-filtration and gas phase filtration Filtrak positive sealing system eliminates bypass of potential harmful cyanoacrylate fumes Options: High temperature hot plate for rapid vaporization of cyanoacrylate Sturdy cart for added mobility of the CA-3000 and CA-6000 UV light kit for decontamination of chamber CA-3000/CA-6000 Construction: Powder coated aluminum chamber Automatic locking safety glass viewing door Vapor-proof fluorescent lightning CA-9000 High Capacity Fuming Chamber CA-9000 Construction: Powder coated aluminum and steel chamber for strength and integrity Automatic locking safety glass viewing door Vapor-proof fluorescent lighting Removable epoxy resin floor is structurally reinforced for heavier evidentiary items Once the fingerprint evidence is developed, various techniques can be used to capture and record the fingerprint. CA-3000 CA-6000 CA-9000 CA-6000C 30 Cyanoacrylate Fuming Chamber with Microprocessor Controller, 36 High 30 Cyanoacrylate Fuming Chamber with Microprocessor Controller, 48 High 70 High-Capacity Cyanoacrylate Fuming Chamber with Microprocessor Controller Optional Cart with Locking Casters for CA-3000 and CA Science. Safety. Solutions. 23

24 Room Air Purifier Portable and Effective Filtration for Indoor Air Quality Issues The Mystaire Room Air Purifier is designed for high-efficiency ambient air cleaning. The room air purifier works on the principal of recirculating air through high-quality HEPA filtration and/or activated carbon filtration to effectively filter contaminants. A high-quality fan pulls contaminated room air into the filtration zone while allowing enough residence time to effectively capture or trap pollutants. Mystaire Room Air Purifiers are constructed from epoxy coated aluminum with a brushless and sparkless centrifugal fan to ensure a long useful life. The room air purifier is portable and easy to install. Typical Applications: Dust control Prison/detention cells Crime laboratory air cleaner Odor control General room air cleaner Evidence property room FE-1200 Room Air Purifier, filters sold separately Fume Extractor Fume and Particulate Containment at the Lab or Crime Scene Designed to accommodate either HEPA or activated carbon filters, the Mystaire Ductless Fume Extractor is an excellent containment choice for the lab or crime scene. The fume extractor is lightweight and portable yet powerful enough to provide a high level of odor or particulate containment. This unit can be placed on the floor, on the bench top, or at the crime scene itself. The lightweight and articulating arm is designed to be positioned directly at the source of fumes or particulate for capture before the contaminants can escape into the working environment. Filters sold separately to handle fumes, vapors or particulate. Contact Mystaire filter specialist for proper filtration selection. FE-1200A Ductless Fume Extractor, Single Arm 24

25 Accessories Solucide Hard Surface Disinfectant Solucide is an EPA registered hard surface cleaner, disinfectant, and deodorizer. Solucide is a broad-spectrum disinfectant spray that is effective in the presence of organic soil. Solucide contains no alcohol or glutaraldehyde and has a fresh lemon scent. Effective in Killing: Norovirus (Norwalk Virus) Parvo Virus Hepatitis A Virus Hepatitis B Virus Hepatitis C Virus Fast TB kill HIV Virucidal Fungicidal Pseudomonacidal Pandemic H1N1 Influenza A Virus SARS associated Coronavirus Clostridium difficile (vegetative form) Bactericidal (MRSE, MRSA, VRE, VISA, Strep pyogenes) * The above is a partial listing. Contact Mystaire for an updated listing. MY-FDR76 16 oz. Pump Spray Bottle, 12 Bottles Per Case SecureDry Optional UV Light Sterilization Kit As a secondary disinfection method to Solucide, SecureDry evidence drying cabinets can be fitted with a timer-activated short wave ultraviolet light sterilization kit. This sterilization method is effective in denaturing potentially live cells remaining in the chamber after use. The short wave UV light irradiates the interior of the chamber prior to placing the new evidence into SecureDry, resulting in minimized cross contamination potential. MY-FDR20 UV Light Sterilization Kit for SecureDry SecureDry Starter Kit The evidence drying cabinet starter kit contains all the necessary items to begin using the cabinets. Kit Contains: 1 bottle Solucide 10 plastic shirt hangers 1 large sponge 4 clip style plastic hangers 1 pack trace evidence pre-filters 1 small sponge MY-FDR90 SecureDry Evidence Drying Cabinet Starter Kit Science. Safety. Solutions. 25

26 Accessories Mobile Carts - Aura Elite For added mobility and flexibility Mystaire offers a complete line of companion mobile carts for the Aura Elite ductless fume hoods. The mobile carts are epoxy coated steel with locking casters. They are designed specifically for the Aura Elite line of products. AU-250C 30 Wide Cart for AU-30 Models, Height 30 AU-252C 30 Wide Cart for AU-30 Models, Height 36 AU-550C 42 Wide Cart for AU-42 Models, Height 30 AU-552C 42 Wide Cart for AU-42 Models, Height 36 AU-750C 54 Wide Cart for AU-54 Models, Height 30 AU-752C 54 Wide Cart for AU-54 Models, Height 36 Mobile Carts - PCR Workstations Constructed of 14-gauge epoxy coated steel, Mystaire custom carts are designed exclusively for our PCR workstations and CleanPrep dead air boxes. All carts feature a two-position movable base bar for wheelchair or lab chair compatibility. Standard height of 34 meets ADA requirements. PCR is a registered trademark of Hoffman-LaRoche MY-9001 MY-9002 MY-9003 MY Wide Cart for MY-PCR24 and MY-DB24 32 Wide Cart for MY-PCR32 36 Wide Cart for MY-DB36 48 Wide Cart MY-PCR48 and MY-DB

27 Accessories Polypropylene Base Cabinet Base cabinets, with a variety of shelving options, are available for Mystaire polypropylene fume hoods. Constructed completely of polypropylene, these cabinets are ideal for storage of corrosive chemicals. Base cabinets may also be vented into the corresponding hood to prevent excessive fume buildup in the base cabinet. CATALOG NO. MY-PBC36 MY-PBC48 MY-PBC72 36 W x 36 H Polypropylene Base Cabinet 48 W x 36 H Polypropylene Base Cabinet 72 W x 36 H Polypropylene Base Cabinet Polypropylene Sinks Polypropylene is an ideal material for minimizing corrosion problems due to it s excellent chemical resistance. Polypropylene molded sinks are light weight and easy to install. A variety of standard sizes are available. CATALOG NO. MY-PSK47 MY-PSK12 MY-PSK18 MY-PSK44 4 W x 10 H Polypropylene Sink 12 W x 12 H Polypropylene Sink 18 W x 18 H Polypropylene Sink 4 W x 4 H Polypropylene Sink Fixtures and Faucets Fixtures and faucets are available on Isola Edge filtered workstations. They are installed and color coordinated on each post. All services are pre-plumbed and wired for easy installation. CATALOG NO. MY-FXGSWM MY-FXVM MY-FXAR MY-FXNG MY-FXDX110 Cold Water, wall mount goose neck Vacuum, wall mount Air, wall mount Natural Gas, wall mount 110V Duplex Outlet, wall mount Other fixtures and services available. Call for additonal details Science. Safety. Solutions. 27

28 Creedmoor, NC USA Phone: Toll Free: Fax: