Free Up Valuable. Fume Hood Real-estate. Leading Safety Standards. Superior Ease of Use. Reduced Cost of Ownership

Size: px

Start display at page:

Download "Free Up Valuable. Fume Hood Real-estate. Leading Safety Standards. Superior Ease of Use. Reduced Cost of Ownership"

Todd Timothy Walker
5 years ago
Views:

1 Free Up Valuable Fume Hood Real-estate Leading Safety Standards Superior Ease of Use Reduced ost of Ownership

General dvantages irlean Systems ductless hoods, workstations and enclosures are designed to protect the operator, the process or both from toxic vapors, fumes, gas and particulate.

This unique filter, found only in irlean Systems safety products, eliminates filer dusting and dead zones associated with traditional granular carbon filters.

ritical to any ductless safety product, the monitoring system must be able to alert the operator if the filter fails, if there is insufficient airflow, or if filter replacement is necessary.

2 General dvantages irlean Systems ductless hoods, workstations and enclosures are designed to protect the operator, the process or both from toxic vapors, fumes, gas and particulate. t the heart of all itlean Systems chemical hoods, workstations and enclosures is a revolutionary gas phase bonded carbon filter. This unique filter, found only in irlean Systems safety products, eliminates filer dusting and dead zones associated with traditional granular carbon filters. Incorporated into each irlean systems product is a state-of-the-art microprocessor controller and monitoring system. ritical to any ductless safety product, the monitoring system must be able to alert the operator if the filter fails, if there is insufficient airflow, or if filter replacement is necessary. ll of the alarms associated with the monitoring system are designed to alert the user immediately if adverse conditions arise. Our ductless fume hoods are a true green product, using much less energy and natural resourced than traditional exhaust fume hoods. The average traditional total exhaust fume hood consumes three-and-a-half times the energy of the average U.S. household. This is dues to the hood exhausting room air, forcing the HV system to continually heat or cool makeup air coming into the laboratory. Ductless fume hoods eliminate this costly cycle- reducing environmental impact through significantly reduced energy use. irsafe utomatic Safety ontroller The irsafe provides operator protection hours a day with a simple-to-use interface combined with powerful airflow control, carbon filtration monitoring and gas detection capabilities. proprietary sensor is used to accurately monitor and display face velocity on the LD display. Blowers can be controlled manually or in automatic mode, where irsafe automatically control blower speed in order to maintain a user-set face velocity. solid-state hydrocarbon gas detector is linked to the controller for monitoring filter breakthrough. udible and visible alarms alert and user to both low airflow and filter replacement irflow Monitoring The irsafe utomatic safety controller constantly monitors airflow and displays the actual instantaneous face velocity on an alphanumeric display. The controller uses a special sensor developed by irlean Systems which, unlike traditional anemometers, poses no safety threat to the operator utomatic/manual Setting In automatic mode the unit is set to maintain a constant face velocity. In manual mode the face velocity is controlled by the operator irflow larm low airflow alarm may be set and displayed. n audible and visible alarm alerts the user if there is insufficient airflow Gas Detection/Filter Monitor solid state electronic gas detector warns the user of filter breakthrough Timer digital countdown lab event timer may be preset by the operator and used to time general lab functions. hemical Pump n optional chemical transfer pump may be directly controlled by pressing the quick key button. UX ontrol ny 110V 8 amp or 0V amp device may be connected and powered on and off via the safety controller. This is particularly useful for switched outlets or transfer devices (requires configuration at purchase) Rotary Evaporator Enclosure irlean Systems, in partnership with Heidolph North merica introduce the most user-friendly safety enclosure for use with Rotary Evaporators. Operator exposure to chemical fumes and vapors has long been a concern when using the rotary evaporator. Many Laboratories simply place the rotary evaporator into a standard exhaust hood, which takes up valuable space, that can be used for other critical laboratory manipulations. These systems are engineered specifically for enclosing rotary evaporates, chromatography equipment and robotic equipment while providing unrestricted access for operator interaction. lear polycarbonate shell and horizontal sliding doors provide visibility for monitoring the equipment, while the irsafe automatic safety controller maintains airflow and monitors filter condition. t only inches deep and 8 wide, this enclosure takes up very little counter space. Ductless Enclosure Features irsafe automatic safety controller constantly monitors airflow and filter condition Integral base with deep spill lip Quit operation; < 9 db Horizontal sliding access doors for equipment manipulation irflow automatically increases when door are opened, preventing fumes from escaping No ductwork required Space-saving design Safely encloses rotary evaporator, vacuum pump and waste bottle Dust-free bonded carbon filter pplication specific construction materials pproved chemical list filter included in unit onnect to HV system thru tubing (Total Exhaust Enclosure ONLY) How the rotary evaporator enclosure works When enclosure doors are closed, room air enters the chamber through access slots at ir moves evenly through the chamber while pulling fumes into the bonded carbon filter at B lean air is recirculated into the room at

Model Description External Dimensions Width Depth Width 0510010 Ducless Enclosure 8 8 7 0510010 Ducless Enclosure 8 50 7 Industrial Rotary Evaporator Enclosure The industrial enclosure is

The enclosure is designed to be attached to two HV ducting collars and used as full enclosure of the industrial evaporator system This allows for precious walk-in hood space to be used

The enclosure is designed with multiple access panels to allow for complete end user control of equipment while providing vapor containment.

Internal Dimensions irflow characteristics Electrical Depth Volume of filtered air Linear face velocity Voltage urrent Base Sides Head ssembly Filter Model Filter Type 1.

5 8 supply dependent Polypropylene BS Designed to provide vapor/fume safety to an industrial evaporator when attached to a exhaust system (HV) Made of polycarbonate panels with multiple

Level < 55 db onstruction Weight 15 lbs. 105 lbs.

3 Model Description External Dimensions Width Depth Width Ducless Enclosure Ducless Enclosure Industrial Rotary Evaporator Enclosure The industrial enclosure is designed to protect the operator of industrial rotary evaporators from harmful fumes and vapors. The enclosure is designed to be attached to two HV ducting collars and used as full enclosure of the industrial evaporator system This allows for precious walk-in hood space to be used for synthetic chemistry, such as jacket reactors, separation funnels or even waste storage, rather than housing the industrial 0L rotary evaporator. The enclosure is designed with multiple access panels to allow for complete end user control of equipment while providing vapor containment. This product is a smart choice to protect workers while maximizing existing laboratory space in a scale-up environment. Internal Dimensions irflow characteristics Electrical Depth Volume of filtered air Linear face velocity Voltage urrent Base Sides Head ssembly Filter Model Filter Type FM -Speed 110V.0 Polypropylene BS Bonded arbon supply dependent Polypropylene BS Designed to provide vapor/fume safety to an industrial evaporator when attached to a exhaust system (HV) Made of polycarbonate panels with multiple entry panels/ doors to provide complete access to industrial evaporator while containing vapors llows operator protection while freeing up the use of a walk-in-hood Operation Speed Noise Level < 55 db onstruction Weight 15 lbs. 105 lbs. * Please contact Heidolph North merica for HV requirements **ll dimensions provided are in Inches units pproved hemical List cetone Dimethylsulfoxide Methylene hloride cetonitrile Ethanol Tetrahydrofuran cetic cid Ethyl cetate Toluene hloroform Hexane Water Diethylether Dimethylformamide Isopropyl lcohol Methanol P/N Width 68 Depth.75 External Dimensions 96 Width 66 Depth Internal Dimensions max. FM at full opening irflow characteristics Size at full opening (60 LFPM average) Super structure Side material See Hei-VP evaporator section for more Sash material information on page 8 Base open-no base panels, circular with cover located ccess panels at base of enclosure onstruction Weight 00 lbs. 5

600 Series Ductless hemical Workstation Features Flexibility and mobility for today s ever changing laboratory environment The 600 Series ductless chemical workstation are a low cost solution for

While smaller and more mobile than a standard ductless fume hood, 600 Series ductless chemical workstations include the same advanced safety features and technology as larger irlean Systems ductless

Standard Features irsafe utomatic Safety ontroller Integral base with deep spill lip Bonded carbon filtration No ductwork required No installation required- plugs directly into a standard 110V or 0V

base, and enclosure material or 8 widths with nominal depth UL, S, and E certified Standard Features The filter and electronics are located above the workspace, eliminating the chance of a chemical

4 600 Series Ductless hemical Workstation Features Flexibility and mobility for today s ever changing laboratory environment The 600 Series ductless chemical workstation are a low cost solution for operator protection from toxic vapors, gases, fumes and particulate while performing low-volume applications with known chemicals. While smaller and more mobile than a standard ductless fume hood, 600 Series ductless chemical workstations include the same advanced safety features and technology as larger irlean Systems ductless hoods: gas phase bonded carbon filtration, real-time gas detection an constant airflow control and monitoring. Standard Features irsafe utomatic Safety ontroller Integral base with deep spill lip Bonded carbon filtration No ductwork required No installation required- plugs directly into a standard 110V or 0V electrical outlet lear polycarbonate shell for 600 visibility Extremely quiet operation <9 db vailable in standard height or tall version ll thermoplastic construction with application specific sash, base, and enclosure material or 8 widths with nominal depth UL, S, and E certified Standard Features The filter and electronics are located above the workspace, eliminating the chance of a chemical spill entering these sensitive areas The brushless, sparkles blower is postfilter The deep base effectively contains accidental spills The low airflow alarm warns the user both visually and audibly Filter safety lockout to ensure correct filter replacement ustom cart available in fixed height; storage shelf may be added Built-in polypropylene cup sink and drain Deck-mounted fixtures ccess port for electrical cords Fluorescent lighting optional on all workstations Water and gas fittings Polypropylene base cabinet hemical disposal pump irlean Systems ductless hoods, workstations, and enclosures meet and exceed relevant OSH and NSI Z9.5 standards Typical pplications General chemistry involving small volumes of common chemicals Tissue staining and processing; histopathology, cytology Gluing operations Solvent cleaning of electronic parts Soldering applications School demonstration workstations Forensic applications- containment of chemicals such as ninhydrin and cyanoacrylate 68 Ductless hemical Workstation irsafetm utomatic safety controller is UL, S and E certified How the 600 Series Works Model 6 6T 6TS 68 68T 68TS Room air enters at Room air mixes with gases and vapors to be filtered at B Filtered clean air exits workstation at B P/N Width Depth External Dimensions Width Depth Internal Dimensions 0 *ll dimensions provided are in Inches units

Polypropylene Ductless Fume Hoods ductless solution for most common applications Polypropylene ductless fume hoods, protect both the operator and the environment by filtering toxic fumes, vapors, or

Standard with a thermally fused integral spill tray, polypropylene fume hoods are chemically resistant to virtually all corrosive applications.

By stacking HEP filter, followed by a bonded carbon filter, the operator can effectively filter both toxic particulate and chemical fumes.

airflow face velocity and carbon filter saturation Polypropylene construction for excellent chemical resistance.

or particulate irzone baffling establishes a proper horizontal airflow pattern and directs toxins away from the operator in a predictable pattern, eliminating dean spots within the hood No ductwork

ll irlean Systems hoods are shipped fully assembled and arrive ready to use Dual wall construction allows for front mounting of services such as water, gas or electrical.

5 Polypropylene Ductless Fume Hoods ductless solution for most common applications Polypropylene ductless fume hoods, protect both the operator and the environment by filtering toxic fumes, vapors, or gases through irlean Systems proprietary bonded carbon filtration before returning clean air to the room. Standard with a thermally fused integral spill tray, polypropylene fume hoods are chemically resistant to virtually all corrosive applications. For the widest application range possible, each polypropylene hood is designed to accommodate up to seven inches of filtration. By stacking HEP filter, followed by a bonded carbon filter, the operator can effectively filter both toxic particulate and chemical fumes. For high evaporation or multi-chemical applications, a full seven-inch stack of chemical filtration may be recommended irsafe automatic safety controller irsafe automatic safety controller monitors airflow face velocity and carbon filter saturation Polypropylene construction for excellent chemical resistance. The result- NO MORE RUST- allows for longer service compare to standard metal enclosures Wide range of bonded activated carbon and HEP filters for containment of virtually any toxic vapor, fume, gas, or particulate irzone baffling establishes a proper horizontal airflow pattern and directs toxins away from the operator in a predictable pattern, eliminating dean spots within the hood No ductwork required Integral vapor-proof fluorescent lighting No installation required. ll irlean Systems hoods are shipped fully assembled and arrive ready to use Dual wall construction allows for front mounting of services such as water, gas or electrical. ccess panels on both sides of the hood allows field service of all fixtures FlowSmooth airfoil on sash lip promotes laminar airflow 000S Polypropylene Ductless Fume Hood with sliding sash, shown on optional base cabinet irzone internal baffling provides even airflow for maximum containment Dual wall construction allows for front mounting of services Sash or Slash lear sides and back ll 110V unless specified Vented and unvented polypropylene base cabinets ccess port for electrical cords Polypropylene sink and deck-mounted fixtures Sturdy stand with leveling feet Remote services- gas, water, vacuum and air Slip hatch electrical access ports 000S Polypropylene Ductless Fume Hood with sliding sash, shown on optional base cabinet External dimensions Internal dimensions Model P/N Sash Type Width Depth Width Depth S 06 06S S " " 6" 5" 1" 6" 5" Filters Required How the polypropylene fume hood works 06S " " 59" 1" 6" Room air flows away from the operator and enters the enclosure in a horizontal pattern at Room air mixes with both lighter and heavier gases at B before being drawn into the irzone baffling at ontaminated air is directed through the filtration bed at D lean air is recirculated into the room at E S S S S *ll Models 110V 96" 96" 59" 66" 66" 90" 90" 6" 5" 1" 5" 1" *ll dimensions provided are in inches units 8 9

Polypropylene Free-Standing Ductless Enclosure Extra vertical height from a proven ductless filtration platform irlean Systems E-Series polypropylene free-standing ductless enclosures are designed to

Typically floor mounted, each free-standing enclosure features an upper folding sash combined with lower access doors, providing easy ergonomic access during manipulation.

The Walk-in enclosures are an effective containment solution for fumes or particulate released from equipment during manipulation or bulk handling application.

6 Polypropylene Free-Standing Ductless Enclosure Extra vertical height from a proven ductless filtration platform irlean Systems E-Series polypropylene free-standing ductless enclosures are designed to accommodate applications that require additional vertical height not found in standard bench top hoods. Typically floor mounted, each free-standing enclosure features an upper folding sash combined with lower access doors, providing easy ergonomic access during manipulation. Full access design allows equipment to be easily inserted or removed from the enclosure, make the E-Series perfect for use with mixers, mills, grinders, reactors or other tall equipment. The Walk-in enclosures are an effective containment solution for fumes or particulate released from equipment during manipulation or bulk handling application. variety of enclosure widths, depths and sash options maximize operator access without compromising safety Laminar Flow Workstations and Enclosures lean ISO 5 air flow for a variety of applications irlean Systems 600 Series vertical laminar flow workstations are ideal for non-hazardous applications that require a clean work area. These compact, lightweight workstations provide a positive-pressure ISO 5 (lass 100) air throughout the chamber and sash opening, keeping airborne particulate away from sensitive applications. Given the small foot print and ease of installation (simply plug in the power cord, the 600 Series vertical laminar flow workstations are an excellent choice for mobile clean zones within your facility. The Polyprolene vertical laminar flow enclosure provides extra workspace height and depth and a variety of sash options to match your application. Full access retracting from sash provides an easy means for loading or unloading equipment. Each enclosure features the same high-quality rush-free construction and UVTect controller as our horizontal laminar flow clean benches. vailable in 1- and 6-foot widths and several depth options. irsafe automatic safety controller Seamless polypropylene construction for excellent chemical resistance. The result: NO Rust Wide range of bonded activated carbon and HEPfilters for containment of virtually any toxic vapor, fume, gas, or particulate No ductwork or installation required. ll irlean Systems hoods are shipped fully assembled and arrive ready to use Intergral vapor-proof fluorescent light Filter stacking options for a variety of applications Multiple depth options Slip hatch electrical cord access ports Larger pass-through access ports Slotted rear-wall for horizontal airflow patterns ustomization of standard design to accommodate equipment for workplace layout Typical pplications Testing and sifting of bulk powders Filling applications- large containers Large-scale chemistry setups Enclosing tall pieces of equipment Bulk chemical mixing and weighing Polypropylene horizontal laminar air flow provides ample width for multiple users. ll clean benches feature dual-wall construction. Bringing in the convenience of side-mounted electrical outlets, gas, vacuum and water fixtures. standard on all horizontal laminar flow clean benches, the UVTect controller constantly monitors HEP filter conditions altering the operator of insufficient airflow and/or filter change. UVTect microprocessor controller ISO 5 (lass 100) airflow ll thermoplastic construction Built-in fluorescent light Slip hatch access port 60-degree visibility (Vertical workstation) Integral polypropylene base for easy cleaning; NO RUST HEP filter monitor automatically indicates when filter change is required Sturdy cart for mobility ULP filter IV bar Typical Ultraviolet light source Metal-free polypropylene construction available pplications Media plate pouring Optics cleaning Plan tissue culture Trace metal analysis Non-hazardous cell culture External dimensions Internal dimensions Model P/N Width Depth Width Depth Filters Required External dimensions Internal dimensions Model P/N P/N Width Depth Width Depth 000E " 6LF Vertical " " 18" 000E " 6TLF Vertical " 9" 1" 7" 6000E " 68TLF Vertical " 0" 9" *ll dimensions provided are in inches units 000HLF 5000HLF Horizontal Horizontal 1" 7" 1" 5" 7" 7" ll irlean Free-Standing and Walk-In Enclosures are ustomizable to accommodate the End Users Needs 6000HlF Horizontal *ll dimensions provided are in inches units 7" 65" 7" 10 11

PowderSafe Enclosures PowderSafe Type enclosures provide a safe and effective weighing environment for toxic compounds and/or liquid chemicals.

These compact, ductless enclosures are factory leak tested, certified and shipped fully assembled for simple installation on any countertop.

accurate powder weighting, while irsafe automatic safety controller monitors airflow and filter condition.

HEPSafe technology allows filters to be safely and easily bagged-out under negative pressure.

7 PowderSafe Enclosures PowderSafe Type enclosures provide a safe and effective weighing environment for toxic compounds and/or liquid chemicals. Engineered specifically for balances, PowderSafe Type enclosures protect the operator by capturing particulate in HEP filtration without sacrificing balance stability. These compact, ductless enclosures are factory leak tested, certified and shipped fully assembled for simple installation on any countertop. External dimensions Internal dimensions Model P/N Sash Type Width Depth Width Depth Filters Required Seamless polypropylene construction provides the mass and vibration resistance crucial for accurate powder weighting, while irsafe automatic safety controller monitors airflow and filter condition. The full rear-wall HEP filtration zone moves powders and particulate away from the operator in a smooth horizontal laminar pattern. HEPSafe technology allows filters to be safely and easily bagged-out under negative pressure T 710TS " " 5" " 0" 0" 1" 1" 1" 6" 9" PowderSafe Type enclosures incorporate the airflow dynamics and HEPSafe features of the PowderSafe Type B with the user-friends features and chemical fume containment capabilities of an irlean Systems ductless fume hood. Thermally fused polypropylene construction makes the Powdersafe Type enclosure perfect for weighing posers or solvent's. When effective powder containment is needed during bulk manipulation, the PowderSafe Bulk Handling enclosure is an economical and space-saving alternative to larger walk-in enclosures. With a unique drub access port incorporated into the base of the enclosure, the drum can be raised and sealed to the access port, effectively extending the enclosure s containment area into the drum. Designed to provide a turbulence-free airflow environment, enclosures move air in a horizontal pattern to maximize containment with minimizing sample loss and balance instability. 70T 70TS B B " " 1" " " " " " 1" 1" " " " " " 6" 9" 18" 18" 5" 5" ll PowderSafe enclosures have been independently tested and verified for operator protection by two leading independent consulting companies BE Bulk " " " 9" 5" 795BE Bulk 59" 9" 796BE Bulk 9" *ll dimensions provided are in inches units irlean systems PowderSafe enclosures utilize HEPSafe filter change-out, allowing the operator to safely and easily bag-out contaminated filters under negative pressure. The heart of this system is a secondary, permanent HEP filter that protects the operator duringprimary HEP filter change-out. If the primary HEP filter should ever become compromised this secondary filter also serves as a backup safety filter. Variable airflow volume via irsafe ontinuous HEP filter monitoring High mass-thermally welded solid polypropylene construction Efficiently weigh to 5 decimal places Seamless construction is easy to clean Real-time airflow display on LD udible and visible airflow and filter alarms Permanent backup HEP filter Fluorescent light- one touch operation Portable; no installation cost Electrical cord access ports arbon filtration for liquid chemicals (Type ) ontrasting base color Waste port for weighing vessels Mobile cart with locking casters Gas phase carbon filtration (Bulk Enclosure) Bonded carbon multipurpose filtrations (Type ) *ll Enclosures are 110V unless otherwise specified 1 1

8 pplication Worksheet Notepad P P L I T I O N W O R K S H E E T - D U T L E S S H O O D Ductless Hoods and Enclosures are ideal for a variety of applications, but not for all applications. Please complete the following and fax to , ttention: Filter Specialist. Please provide accurate information so that we can best determine if a ductless hood is appropriate for your application and verify the correct filter(s) needed for your application. T h a n k y o u f o r y o u r t i m e a n d i n t e r e s t i n H e i d o l p h / i r l e a n S y s t e m s. 1) Describe the process to be completed inside the hood. (ex. solvent mixing, slide staining, dilutions, robotic, etc) ) List all chemicals to be used inside the ductless fume hood. (this will determine filter longevity) hemical Name Powder or Liquid? Will the composition change? oncentrati on mt Volume evaporated in hours Frequency (per day, per week) Heated? Y/N Remaining in hood after process? apped or uncapped? ) Will any of the above chemical(s) be heated inside of the hood? If yes, to what temperature and for how long? What are you using to heat the chemicals? ) Describe laboratory environment that hood is to be placed into. (ex. cidic, lean room, etc.) 5) re you trying to protect the operator or process (cannot be both)? 6) What equipment will be used inside of the hood? Explain. (ex. beakers, microscope, robotic, etc.) 7) How many linear feet of hood space are required for your application? 8) What are the dimensions of the available bench top space? 9) Will this be placed on a bench or do you require a cart/bench? 10) Is Ducted an option? 11) Equipment needed by date: ontact: Phone: Fax: ompany (provide address) P h o n e : x F a x : E m a i l : n k v a s n i c k h e i d o l p h. c o m w e b - s i t e : w w w. H e i d o l p h N. c o m 1 15

9 Heidolph North merica 11 Jarvis venue Elk Grove Village, IL Phone Fax Toll Free

Solutions for Protecting the Operator or Process from Chemical Fumes, Vapors and Particulate

Solutions for Protecting the Operator or Process from Chemical Fumes, Vapors and Particulate www.aircleansystems.com CORPORATE OVERVIEW Founded in 1992, AirClean Systems is the largest North American manufacturer