FOOD PROCESSOR INSTRUCTION MANUAL

Transcription

1 FOOD PROCESSOR INSTRUCTION MANUAL

2 CONTENTS INTRODUCTION... SAFETY PRECAUTIONS... UNPACKING YOUR DUALIT FOOD PROCESSOR... GETTING TO KNOW YOUR FOOD PROCESSOR UNDERSTANDING WHICH BOWL(S) AND ACCESSORIES YOU NEED... ASSEMBLING AND USING YOUR PROCESSOR... CLEANING AND CARE

3 INTRODUCTION Dualit s stylish food processor is versatile and hard working, making it the perfect food preparation assistant. With clever features that bring maximum benefits to you, including a powerful heavy-duty induction motor and interchangeable long-life stainless steel blades and discs, the range of practical applications is unbeatable! Plus a number of multiple safety features like the non-slip sucker feet gives you peace of mind while you work. You will be amazed at the features offered with the Food Processor such as the special design dough blade and emulsifying disc, which creates a perfect finish with every mix. The three extra thick multi purpose bowls - each with their own blade - provide additional efficiency, avoiding the chore of washing up between recipes and the large bowl with its unique sealed drive system offers a greater capacity of 2.1L for liquids and 3.25L for dry, this radically increases the practical working volume. With its unique design and heavy-duty professional parts, your Dualit Food Processor will provide you with years of reliable use. Take inspiration from the Cookbook provided and create your own culinary masterpieces. Enjoy! 3

4 SAFETY PRECAUTIONS IMPORTANT SAFEGUARDS READ ALL THE INSTRUCTIONS CAREFULLY BEFORE USING YOUR DUALIT FOOD PROCESSOR. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE REFERENCE. Always follow these safety precautions when using your food processor, for your own safety and to avoid damaging the processor. This appliance is designed to operate with an AC power supply. Make sure your network voltage corresponds to the voltage shown on the rating plate underneath the food processor Do not use the food processor if the cord or plug is damaged, it must be replaced by a special cord avalable from Dualit or Authorised service agent. For more information, call the Dualit customer care line on Never use a plug without the fuse cover fitted. Always make sure a replacement fuse is the same rating as the original Replacement fuses should be approved to BS 1362 and are available from Dualit NOTE: Any plug cut from its power supply cord should be disposed of immediately. Inserting any cut-off plug into an electrical socket is dangerous Unplug the unit when not in use, before fitting or removing parts and before cleaning. To unplug it, hold the plug and pull it out of the socket. Never pull it out by the power cord Do not use the food processor outdoors This product is for domestic use only Do not use the processor on a sloping surface Make sure the power cord doesn t hang over the edge of the table or countertop Make sure it isn t in contact with anything hot or wet Never leave the processor unattended when it is plugged into a wall socket or switched on Children should be supervised to ensure that they do not play with the appliance This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Ensure that the processor, the toolbox and all accessories are always kept well out of reach When moving the processor, use both hands and lift holding the base unit. Never lift the processor using the bowl handle Never tamper with the safety systems. They are included for your personal safety The blades and discs are extremely sharp; take extra care when handling these parts, especially when removing from the bowl, emptying the bowl and during cleaning. Avoid touching the sharp edges The use of attachments not recommended or sold by Dualit may cause fire, electric shock or injury to the user or the appliance Use the spatula only when the unit is turned off, the blade or discs are removed and the processor is unplugged Store the toolbox out of reach of children 4

5 SAFETY PRECAUTIONS Never operate the processor with the bowls empty. Do not misuse the processor; it is designed for use with food items only Before each use, check that the bowls contain only the ingredients and nothing else Do not process boiling or hot liquids Bowls and attachments are not suitable for microwave use Ensure the bowl(s), accessory(s), lid and food pusher are all securely in place before turning the processor on. It will not work without the large bowl and lid in place and locked Only use the food pusher supplied to insert and push ingredients down the feeder tube. Never use your fingers or utensils; this could cause severe injury and also damage the appliance Do not overfill the bowls; ingredients need room to move around. Use the maximum loading chart on page 11 for reference Always turn the power off via the control knob before opening the lid Switch off the appliance before changing accessories or approaching moving parts while in use Never remove the bowl or lid until the blades or discs have come to a complete stop Never touch moving parts or insert your hand or utensils into the bowl. Use the food pusher provided to guide ingredients through the feed tube The processor features an overheat cut-out that cuts the power if it becomes too hot for any reason. If this occurs turn the control knob to the off position. Once it cools down, the safety cut-out will automatically reset itself within 1 hour and the power will be restored Do not submerge the motor housing, cord or plug in water or any other liquids Clean all parts after each use; please refer to the cleaning instructions on page 21 If your ingredients include raw meat, make sure the bowls and attachments are cleaned thoroughly, immediately after use When using a dishwasher, always set it to the lowest setting (max 40ºC) and keep bowls and accessories well away from the heating elements. Avoid the drying cycle. SAVE THESE INSTRUCTIONS In the interest of improving products, Dualit Ltd. reserves the right to change the product specification without prior notice. 5

6 UNPACKING YOUR DUALIT FOOD PROCESSOR Unpack the box with care, keeping all the packaging materials until you are satisfied that everything you need is there and in working order. In your box you should find: instruction booklet food processor cookbook power cord, with plug toolbox of accessories processor lid with food pusher & lid large bowl, with medium and small bowls inside main body: motor housing with bowl drive on top Cookbook 6 Read this instruction manual before you start. It gives you important safety information and also ensures you get the most out of your Dualit food processor. Keep the manual, and your proof of purchase, in a safe place. If you find there are any missing or damaged parts when you unpack your box, contact the retailer or call the Dualit customer care line on Before you use your processor for the first time, wash all parts as per the cleaning and care instructions on pages 21 to

7 GETTING TO KNOW YOUR FOOD PROCESSOR Your food processor is designed to create great results and to make life easy for you, but it is important that you get to know what it can do and why it is designed in this way. Deliberately weighty, the commercial grade induction motor adjusts power to keep the speed constant, at the setting you have selected. Non-slip sucker feet keep the processor firmly in place. The control knob has three settings: Off O, continuously On I and intermittent Pulse PULSE. The fixing on top of the main body is the bowl drive. The large bowl locates on the bowl drive and locks in place. The medium and small bowls then fit inside the large bowl. MAIN BODY AND CONTROL KNOB LID AND FOOD PUSHER The lid locates on the large bowl, rotates through 30 and locks in place (the processor won t start unless the lid is locked on). A large feeder tube makes it easy to add ingredients whilst the motor is running. Use the food pusher when doing this; it also doubles as a liquid measure with lid. 7

8 GETTING TO KNOW YOUR FOOD PROCESSOR LID AND FOOD PUSHER A key feature of the Dualit processor, the three different-sized bowls give you maximum flexibility and convenience. Using an appropriate sized bowl for the quantity of ingredients gives a better result, whether blending or chopping. It also means that if you need different sized bowls, you won t always have to wash the bowl between tasks. Large bowl Medium bowl Small bowl Use this bowl for all liquids (it has a sealed drive). It offers the maximum working capacity, and needs to be in place before you can use either of the other two bowls. Air vol: 3.25L. Use this as a secondary bowl, to keep the large bowl clean and ready for your next job. This is also the best bowl when using slightly smaller quantities. (see chart on page 11) Air vol: 2.6L. 8 Perfect for everyday processing tasks like chopping herbs or puréeing baby food. The small bowl must sit inside the medium bowl. Air vol: 1.0L.

9 GETTING TO KNOW YOUR FOOD PROCESSOR ACCESSORIES Your Dualit food processor comes with a range of attachments, each perfect for a particular task. They fit neatly inside the toolbox, for safe and convenient storage. Inside the box you will find: Drive shaft Small, medium and large chopping blades Dough blade You will need to use this on the bowl drive to attach some of the accessories. There are three different sized chopping blades, one for each bowl. The bakery grade dough blade is the perfect workhorse for making bread dough and pastries. Grating & shaving disc Shredding disc Chipping disc The grating and shaving disc is perfect for grating hard cheeses and ingredients like ginger. The shredding disc makes perfect shredded cabbage or grated cheese The chipping disc is ideal for making homemade chips or quick preparation for stir-fry. Adjustable slicing disc E-disc Spatula The adjustable slicing disc is useful when you need to vary the size of your slices (from 0.5mm to 7.5mm). The e-disc is a great alternative to the more traditional wire balloon whisk, for emulsifying liquids (e.g. salad dressings) or whisking egg whites. Made from durable silicon, the spatula is flexible enough to scrape your bowls clean. 9

10 UNDERSTANDING WHICH BOWLS AND ACCESSORIES YOU NEED USING THE RIGHT ACCESSORIES FOR THE TASK Your Dualit bowls and accessories will not work in every permutation: Large bowl & attachments Medium bowl & attachments Small bowl & attachments You must always start your assembly with the large bowl neither the medium or small bowls will fit directly onto the main body The small bowl must be used in conjunction with the large and medium bowls. Each bowl has its own sized chopping blade; you must choose the right one for the bowl you are using The e-disc and dough blade will only work inside the large bowl The adjustable slicing disc will work with the large and or medium bowl The chipping disc will work with the large or medium bowl All other discs will work with all three bowls You will need to attach the drive shaft to the bowl drive in order to use certain accessories (for more details, see the assembly instructions on page 14). This illustration summarises which accessories can be used with which bowl, and the order of assembly. 10

11 UNDERSTANDING WHICH BOWLS AND ACCESSORIES YOU NEED CHOOSING THE RIGHT BOWL FOR THE TASK Your food processor will produce the best results if you use the bowl size that best matches the quantity and type of food you are processing. The large bowl has a sealed drive; use this bowl for all liquid mixtures. Small quantities of ingredients like herbs or garlic are best chopped in the small bowl. The table guides you on the maximum quantities of different types of food for the large bowl. Never exceed the maximum shown and make sure that your ingredients have room to move around. Ingredients Bread Dough Shortcrust Pastry Minced Meat Grated Soft Cheese Grated Carrots Large Bowl 1.4Kg 1.4Kg 1.45Kg 1.2Kg 1.36Kg Sliced Tomatoes 1Kg Sliced Cucumber 1.36Kg Soup 1.3L Thin - 2.1L Thick Victoria sponge mix 8 eggs - 4lbs 11

12 UNDERSTANDING WHICH BOWLS AND ACCESSORIES YOU NEED Using the quantities given on page 11 as a guide, you now need to decide what you want to do, and what bowls and accessories you will need. The table below should get you started. CHOOSING THE RIGHT BOWL FOR THE TASK Task Small quantity of baby food Parts you will need, in the order of assembly Large & medium bowl + drive shaft + small bowl + small chopping blade + lid+ food pusher Small quantity of liquids Large bowl (always use the large bowl for liquids) + e-disc + lid + food pusher Chopping herbs Large & medium bowl + drive shaft + small bowl + small chopping blade + lid+ food pusher Slicing apple Large bowl + medium bowl + drive shaft + adjustable slicing disc set to 3mm + lid. Bread dough Large bowl (can t use dough blade with any other bowl) + dough blade + lid + food pusher Beating egg whites Large bowl (can t use e-disc with any other bowl) + e-disc + lid+ food pusher Home-made chips Large bowl + drive shaft + chipping disc + lid + food pusher PREPARATION It is important to remember to use the right accessories with the right bowl. Some accessories will only work with one bowl. It is also important to assemble the processor correctly. Handwash all bowls and accessories before use (See diagram on page 21) Position the processor close to a power socket with enough space around it for ingredients, bowls and accessories. It must be at least 15cm from the edge of the table or counter, with the control knob facing you. Press down on the main body so that the sucker feet hold it securely in position. 12

13 ASSEMBLING AND USING YOUR PROCESSOR ASSEMBLING BOWLS You will always need to put the large bowl in place first, no matter what you intend to do. Hold the large bowl with the handle pointing to the right (3 o clock), position it onto the bowl drive and turn it clockwise by 90 (6 o clock) until you hear and feel it lock in place If you want to use the medium bowl, insert this into the large bowl; it will self-locate If using the small bowl, you will also need to use the medium bowl & drive shaft. These must be put onto the bowl drive before the small bowl is inserted The small bowl fits into the medium bowl. When inserting it into the bowl you will need to rotate the small bowl until the tabs on the medium bowl locate in the slots on the small bowl (See diagram on page 14) Always try and start with the tasks that require the smallest bowl first, so that you are removing the used bowls instead of putting clean bowls inside dirty ones REMOVING BOWLS THE LARGE BOWL CAN BE REMOVED FROM THE MAIN BODY WITH OR WITHOUT THE LID LOCKED IN PLACE. Rotate the control switch to the Off position Unlock the lid prior to removing the large bowl Hold the large bowl with the handle pointing to the right (6 o clock), turn it anti-clockwise by 90 (3 o clock) until you hear and feel it unlock. Rotate the bowl anti-clockwise to unlock from the main body 13

14 ASSEMBLING AND USING YOUR PROCESSOR The drive shaft locates on the bowl drive on the main body. With some permutations you will need the drive shaft; with others you won t. DRIVE SHAFT If you need to use the drive shaft, locate it on the bowl drive first, then attach the accessory (e-disc excluded see e-disc assembly instructions on page 18) Large bowl You won t need the drive shaft with: the large bowl & chopping blade the medium bowl & chopping blade the large bowl & dough blade You will need it with: large bowl & any cutting disc the large bowl & e-disc medium bowl & any cutting disc small bowl & all attachments When using the drive shaft, locate this on the bowl drive first, then attach the relevant blade or disc. Medium bowl Small bowl 14

15 HANDLE BLADES USING ONLY THE CENTRE PLASTIC SECTION. ASSEMBLING AND USING YOUR PROCESSOR CHOPPING BLADES There is a different sized chopping blade for each bowl; make sure you choose the right one. Small blade Medium blade Large blade The large chopping blade locates directly onto the bowl drive, once the large bowl is locked in place The medium chopping blade also locates directly onto the bowl drive, once both large and medium bowls are in place The small chopping blade needs to be used with the drive shaft. This must be attached to the bowl drive once the large and medium bowls are in place, but before the small bowl is inserted Always hold chopping blades by the plastic centre section, being careful not to touch the sharp edges Don t add your ingredients until your chopping blade is in place Cut large ingredients into uniform pieces no larger than 2.5cm 2 Ensure meat is very cold but not frozen and use short pulses for greater control whilst chopping. Small & medium bowl + Drive shaft Medium bowl Large bowl DOUGH BLADE The dough blade can only be used with the large bowl. It has a mixing/kneading action. Place the dough blade directly onto the bowl drive, once the large bowl is in place Add dry ingredients to the bowl Liquids can be added in a controlled way via the feeder tube Be careful not to exceed the maximum quantities indicated on page Dough blade Large bowl

16 ASSEMBLING AND USING YOUR PROCESSOR USING YOUR CUTTING DISCS ONLY USE THE FOOD PUSHER TO PUSH INGREDIENTS DOWN THE FEEDER TUBE. NEVER USE YOUR HANDS. When using these discs, the orientation of the ingredients in the feeder tube will determine the way they cut. Stacking items vertically will produce discs and horizontal stacking will produce the longest strips or slices If you position the disc so that the cutting edge is away from the feeder tube, then the disc will start cutting as soon as you turn the processor on Apply a gentle downward pressure on the pusher to guide food onto the cutting disc. Too much pressure will lead to uneven cutting. The cut ingredients may build up on one side of the bowl, in which case stop the processor and use the spatula to distribute them evenly Occasionally small pieces of your ingredients may be left on the disc, uncut. These can be hand chopped and added to your mixture You cannot grate soft ingredients. Chill chocolates and cheeses before using in the processor. Vertical stacking will produce discs Horizontal stacking will produce strips 16

17 ASSEMBLING AND USING YOUR PROCESSOR GRATING & SHAVING, SHREDDING AND CHIPPING DISCS ONLY HANDLE DISCS BY THE PLASTIC CENTRE SECTION. The shaving and shredding discs can be used with all bowls. The chipping disc can be used with the large and medium bowls only. They always need to be attached to the bowl drive via the drive shaft. Add your Ingredients via the feeder tube after the lid is locked in position. Discs must be inserted with the cutting face upwards (the chip is a single sided disc check it is the correct way up). Attach the disc directly onto the drive shaft, gently push down and twist until securely in position Align and lock the lid into position Pack the ingredients into the feeder tube When using the processor with these discs, push the ingredients down the feeder tube using the food pusher. HANDLE WITH CARE WHEN ADJUSTING, THE BLADE IS EXTREMELY SHARP The adjustable slicing disc can only be used with the large and medium bowls. It creates any slice thickness between 0.5mm and 7.5mm. It must be attached to the drive shaft. To adjust the slicing thickness, rotate the outer spindle on the underside of the disc anti-clockwise to make the slices thicker, or clockwise to make them thinner The adjustable slicing disc is then attached to the drive shaft with the cutting edge uppermost The lid is locked on, the ingredients gently packed into the feeder tube and the food pusher used to push the ingredients through the cutter. ADJUSTABLE SLICING DISC 17

18 ASSEMBLING AND USING YOUR PROCESSOR The e-disc can only be used with the large bowl, and only with liquids (including egg whites). For best results use a minimum of two/three egg whites. To emulsify liquids successfully, add additional liquids slowly through the feeder tube. Attach the drive shaft onto the centre of the e-disc with a push and twist action making sure it s securely in place Place the e-disc assembly directly onto the bowl drive Put liquid ingredients into the bowl Close and lock the lid Additional ingredients can be added through the feeder tube with the processor running. E-DISC SPATULA Use the spatula to redistribute ingredients that have built up around the sides of the bowls, or to help decant ingredients from bowls to other containers. ALWAYS TURN TO O POSITION TO STOP THE POWER THEN UNPLUG THE PROCESSOR BEFORE USING THE SPATULA. BE CAREFUL NOT TO TOUCH THE CUTTING BLADES WITH YOUR HANDS WHEN YOU USE THE SPATULA TO SCRAPE THE INSIDE OF THE BOWL. 18

19 ASSEMBLING AND USING YOUR PROCESSOR YOUR FOOD PROCESSOR WON T WORK UNLESS THE LID IS LOCKED IN PLACE. DO NOT REMOVE THE LID UNTIL THE BLADE OR DISC HAS STOPPED TURNING. When you have assembled the right bowl(s) and accessories for the job you want to do, align the locking pins in the lid with the slots on the rim of the large bowl To lock, rotate the lid clockwise 30 degrees until the tab aligns with the top of the bowl handle. You will hear a click to confirm that the lid is now locked on When opening the lid, ensure the blade or disc has stopped turning, the control knob is in the off position and the processor is unplugged at the socket To remove, hold the bowl handle with one hand and turn the lid anti-clockwise with the other hand. Lift it up and off Always store the processor with the lid unlocked. LID FEEDER TUBE AND FOOD PUSHER ONLY USE THE PUSHER THAT COMES WITH THIS APPPLIANCE; DO NOT USE ANYTHING ELSE TO PUSH FOOD DOWN THE FEEDER TUBE. Always ensure the food pusher is in place before you start using your processor. Pack ingredients tightly in the feeder tube so that they produce uniform pieces The food pusher doubles as a measure, with a lid for your convenience. 19

20 ASSEMBLING AND USING YOUR PROCESSOR CONTROLS The control knob has three settings: Off, continuous On or intermittent Pulse. OFF Off : the processor is off when the control knob is in the vertical position Continuous On : rotate the knob clockwise to the I symbol. It will remain on until manually turned back to the Off position Intermittent Pulse : uses short pulses for more control while processing. Rotate the knob anti-clockwise to Pulse. When released it will automatically return to the Off position. Allow a couple of seconds for the ingredients to drop before pulsing again. ON The processor features an overheat cut-out that Interrupts the power if the motor becomes too hot for any reason. If this occurs turn the control knob to the off position and unplug the power cord. Once it cools down, the safety cut-out will automatically reset itself within 1 hour and the power will be restored. PULSE 20

21 CLEANING AND CARE DISMANTLING UNPLUG THE PROCESSOR BEFORE DISMANTLING. ALWAYS WAIT FOR THE BLADES OR DISCS TO STOP COMPLETELY BEFORE OPENING THE LID. WHEN HANDLING THE BLADES OR DISCS, HOLD THEM BY THE PLASTIC CENTRE SECTION. DO NOT TOUCH THE CUTTING EDGES. Turn off the power and unplug the processor from the socket when not in use Unlock and remove the lid Remove all attachments from the bowl; always handle attachments using the centre plastic section and lift straight up To unlock the bowl, hold the handle and rotate it anti-clockwise 90 to the 3 o'clock position, then lift the bowl straight up Decant your mixture. BLADE MAINTENANCE ALWAYS TAKE EXTRA CARE WHEN HANDLING THE BLADES. Over time the chopping blades will become less sharp, you can use a knife sharpener to give them a new lease of life. But this does depend on the design of sharpener. CLEANING It is important to clean the processor and all parts after each use. This will prolong the life of your appliance. ALWAYS SWITCH OFF AND UNPLUG BEFORE ANY CLEANING. NEVER USE ABRASIVE CLEANERS ON ANY OF THE PARTS. TAKE EXTRA CARE WHEN WASHING BLADES, THEY ARE VERY SHARP. NEVER IMMERSE THE MAIN BODY IN WATER OR OTHER LIQUIDS. Dismantle the attachments & bowls from the main unit before you start cleaning Unplug and wipe the main body with a damp cloth. Dry immediately Wash the bowl, lid, blades and discs immediately after each use with warm soapy water. Use a small brush to get to hard to reach areas Thoroughly rinse all parts and dry Some foods such as coffee beans or whole spices may discolour the bowls. This is normal and will not harm the plastic or affect the flavour of your food. However, if you use these ingredients frequently, you may wish to purchase additional bowls. Contact the Dualit Customer Care line on +44 (0) for more details. USING A DISHWASHER 21 All attachments and bowls excluding the main body are suitable for dishwasher use. Use a wash cycle below 40 C Only put the food processor parts on the top rack of your dishwasher and keep them well away from the heating elements. Remove prior to drying cycle. Unload the dishwasher carefully; the attachments are sharp.

22 CLEANING AND CARE ENSURE THE PROCESSOR IS UNPLUGGED WHILST IN STORAGE, WITH THE LID UNLOCKED. THOROUGHLY CLEAN AND DRY YOUR PROCESSOR AND ALL ATTACHMENTS FOLLOWING THE CLEANING INSTRUCTIONS ON P 21. CHECK THE CONTROL KNOB IS IN THE OFF POSITION BEFORE STORING. KEEP THE TOOLBOX OUT OF REACH OF CHILDREN. Dismantle the processor, clean and dry all parts Store the: bowls, drive shaft, small blade and lid with food pusher assembled on the processor body Do not lock the bowl lid whilst in storage. This can damage the safety mechanism built into the bowl The large and medium blades, spatula and all discs should be stored in the toolbox provided or in the same manner you would store sharp knives. The chipping disc will only fit in the second disc slot as shown below Keep out of direct sunlight whist in storage. Grating & Shaving discs STORAGE Large Blade E-Disc TROUBLESHOOTING What do I do if my processor won t turn on? Check the plug is correctly fitted in the outlet and the power supply is switch on Check the power cord is securely attached to the back of the processor Check the fuse in the plug. Ensure the new fuse is the same current value as original Ensure the bowl and lid are locked in position Check that the small bowl has properly located onto the medium bowl. If not the lid will not locate properly and the processor will not turn on. What if it switches itself off while I m using it? The motor may have overheated. To prevent damage, the unit will automatically cut all power. If this happens: Turn switch to off, unplug and allow the unit to cool for approximately 1 hour. Once cool the overheat safety feature will reset and you can carry on using the processor Check the lid or bowl has not become lose. What if it doesn t chop uniformly? Blades or discs may not be attached properly You may be exerting too much force on the food while pushing down the feeder tube. What if my egg whites won t stiffen up? You may not be using enough eggs (we recommend a minimum of two eggs) You may be using the wrong accessory; for egg whites you need the e-disc and the large bowl You may not be whisking for long enough Your bowl must be completely dry. Chiping disc Adjustable slicing disc Medium Blade Spatula Dough Blade 22

23 CLEANING AND CARE GUARANTEE This appliance is of excellent quality and construction. However, if any defects in materials or workmanship do appear during the relevant guarantee period, we will, at our discretion, either repair or replace the defective parts, free of charge, subject to the terms and conditions of our Guarantee shown below. This Guarantee covers both parts and labour. Carriage is not included. Your guarantee period is as follows: 3 years on parts 12 years on the motor This Guarantee provides benefits which are additional to, and do not affect, your statutory rights. This guarantee does not cover the cost of returning the product to the dealer from whom it was purchased or to ourselves. This guarantee applies only to products sold and located in mainland Great Britain. It does not cover liability in respect of or replacement of plugs, cables or fuses and also does not cover defects due to: Failure to use or maintain product in accordance with Dualit's instructions. The product being connected to an unsuitable electricity supply. Accidental damage to or abuse or misuse of the product. The product has not been modified except by Dualit or approved agent. Dismantling of or interference with the product. Theft or attempted theft of the product. Before returning any product under this guarantee, please check that: You have followed the product instructions correctly. Your mains electricity supply is functional. The defect is not due to a blown fuse. If you wish to claim under this guarantee you should: Send the product, postage or carriage paid, to the dealer from whom it was purchased or to Dualit direct. Ensure that the product is clean and packed carefully (preferably in its original carton). Enclose details of your name, address and telephone number and when and where the product was purchased, together with proof of purchase (e.g. a till receipt). Give exact details of the nature of the defect. This Guarantee does not cover any other claims whatsoever, including, without limitation, any liability for incidental, indirect or consequential damage, nor does it cover any claims for conversion or modification or for the costs of repair carried out by any third party without the prior consent of Dualit. If replacement parts are fitted to the product this will not extend the period of the guarantee. For further advise on using your Dualit food processor and other products in the Dualit range contact the Dualit customer helpline on +44 (0) (09:00 to 17:00 Monday to Friday). Alternatively, Dualit at info@dualit.com or visit 23

24 D UALIT L IMITED C OUNTY OAK WAY C RAWLEY W EST S USSEX RH11 7ST T ELEPHONE: +44 (0) FACSIMILE: +44 (0) info@dualit.com WEB: GB0209