ALTO DRAWER SYSTEMS .hafele.com.au Dimensions in mm 2018 www

Transcription

1 08 Dimensions in mm Dimensional data not binding, images are for illustrative purposes only. We reserve the right to alter specifications without notice. ALTO DRAWER SYSTEMS

2 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 ALTO DRAWER SYSTEM ALTO DRAWER SETS ALTO BOX Alto Drawers: Affordable Quality. Smooth and effortless. Totally practical, the Alto Drawer System offers an affordable solution coupled with silence, smooth running and ease of use. The synchronised opening action of the Alto Drawer is supremely comfortable - thanks to proven knowledge behind this soft-closing technology, leaving you in no doubt of its quality. PAGE PAGE 6 INTERNAL FRONT PANELS PAGE 7 GALLERY RAILS AND BACK BRACKETS PAGE 9 Features > 35 kg load capacity. > Full extension runners with integrated soft-close. > Mounting: Front fix brackets snap into drawer sides with knock-in, screw-fix or expanding dowel mounting onto the drawer front. Tried and Tested > The Alto Drawer System has been independently tested and passed the exacting European DIN EN5338 Level 3 standards. Tried and tested. Tested and passed: DIN EN5338 This was achieved with a full 35 kg weight capacity over 60,000 opening and closing cycles - meaning Alto will be there for you through the life of your kitchen! MARKING JIGS AND ACCESSORIES PAGE 0 DRAWER INSERTS PAGE 5 INDEX PAGE 3 WASTE BINS PAGE TECHNICAL INFORMATION PAGE 5

3

4 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 ALTO DRAWER SETS 86 MM WHITE OR SILVER METALLIC ALTO DRAWER SETS 0 MM WHITE OR SILVER METALLIC Mounting Mounting 9.5 min min min. 36 min Drilling dimensions for cabinet Drilling dimensions for back Drilling dimensions for cabinet Drilling dimensions for back 3 min. 5 Drilling dimensions for drawer front Drilling dimensions for drawer runner Packing: set min. 5 Drilling dimensions for drawer front Drawer length (mm) White Silver Metallic Supplied with: > One pair of drawer sides > One pair of drawer runners > One pair of expanding dowel front fixing brackets > One pair of back panel brackets > One pair of cover caps 3 min. 5 Drilling dimensions for drawer front Drilling dimensions for drawer runner min. 5 3 Drilling dimensions for drawer front Drawer length (mm) White Silver Metallic Packing: set Supplied with: > One pair of drawer sides > One pair of drawer runners > One pair of expanding dowel front fixing brackets > One pair of back panel brackets > One pair of cover caps

5 ALTO DRAWER SETS 6 MM WHITE OR SILVER METALLIC ALTO DRAWER SETS 0 MM WHITE OR SILVER METALLIC Mounting Mounting min min min min Drilling dimensions for cabinet Drilling dimensions for back Drilling dimensions for cabinet Drilling dimensions for back min.5 Drilling dimensions for drawer front Drilling dimensions for drawer runner 37.5 Drilling dimensions for drawer front Drawer length (mm) White Silver Metallic Packing: set Supplied with: > One pair of drawer sides > One pair of drawer runners > One pair of expanding dowel front fixing brackets > One pair of back panel brackets > One pair of white or silver metallic gallery rails > One pair of cover caps 0 3 min. 5 Drilling dimensions for drawer front Drilling dimensions for drawer runner Drilling dimensions for drawer front Drawer length (mm) White Silver Metallic Packing: set min Supplied with: > One pair of drawer sides > One pair of drawer runners > One pair of expanding dowel front fixing brackets > One pair of back panel brackets > One pair of white or silver metallic gallery rails > One pair of cover caps 3 min 5 5

6 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 ALTO-BOX SINGLE METAL HANGING PANEL WHITE ALTO-BOX DOUBLE METAL HANGING PANEL WHITE > To suit: 6 mm drawer sets > To suit: 0 mm drawer sets Drawer length (mm) Non-perforated Perforated Packing: pair SILVER METALLIC Drawer length (mm) Non-perforated Perforated Packing: pair SILVER METALLIC > To suit: 6 mm drawer sets Drawer length (mm) Non-perforated Perforated Packing: pair > To suit: 0 mm drawer sets Drawer length (mm) Non-perforated Perforated Packing: pair 6

7 STANDARD INTERNAL FRONT PANEL 86 MM DRAWER SET WHITE STANDARD INTERNAL FRONT PANEL 86 MM DRAWER SET SILVER METALLIC Front panel, 07 mm Front panel, 07 mm STANDARD FRONT PANEL END BRACKET Packing: pair STANDARD FRONT PANEL END BRACKET Packing: pair Note: Panel width = Internal cabinet width less 87 mm Note: Panel width = Internal cabinet width less 87 mm 7

8 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 TALL INTERNAL FRONT PANEL AND CROSS RAIL 0 MM DRAWER SET WHITE TALL INTERNAL FRONT PANEL AND CROSS RAIL 0 MM DRAWER SET SILVER METALLIC Front panel, 07 mm Cross rail, 07 mm Front panel, 07 mm Cross rail, 07 mm TALL FRONT PANEL END BRACKET Packing: pair HANDLE FOR INTERNAL FRONT PANEL TALL FRONT PANEL END BRACKET Packing: pair HANDLE FOR INTERNAL FRONT PANEL Adjustment Note: Panel width = Internal cabinet width less 87 mm Cross rail width = Internal cabinet width less 70 mm Adjustment Note: Panel width = Internal cabinet width less 87 mm Cross rail width = Internal cabinet width less 70 mm

9 BACK BRACKETS WHITE GALLERY RAILS WHITE Drawer height (mm) Packing (pairs) Packing: 0-50 pairs SILVER METALLIC Drawer height (mm) Packing (pairs) Packing: 0-50 pairs > Version: For 6 or 0 mm drawer sets > Includes: Both expanding dowel and screw-on front fixings Drawer length (mm) Packing: 5 sets SILVER METALLIC > Version: For 6 or 0 mm drawer sets > Includes: Both expanding dowel and screw-on front fixings Drawer length (mm) Packing: 5 sets 9

10 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 MARKING JIG DRAWER FRONT ACCESSORIES! " $ % & / ( > : White, plastic > Area of application: Used to mark the front fix bracket drilling positions on the drawer front. Packing: pair GALLERY RAIL ! Screw-on front fix bracket " Knock-in front fix bracket Expanding dowel front fix bracket $ Knock-in Gallery rail connector white % Expanding dowel gallery rail connector white & Expanding dowel gallery rail connector silver / White cover cap ( Silver cover cap > : White, plastic > Area of application: Place over installed front fix bracket to determine gallery rail position on drawer front Packing: 00 pieces Note: Customised cover caps are available upon request (MOQ =,000 pieces) 0

11

12 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 WASTE BINS ONEFIVE WASTE BIN SYSTEM ONEFIVE WASTE BIN SYSTEM COMPLETE SETS > > Area of application: To suit Alto drawers with a depth of 500 mm > > Material: Frame: Steel Lids, base plates and pails: plastic > > : Dark Grey > > Features: Three dimensionally adjustable front support brackets Cabinet width 5.5 Min * width 500 depth 50 width 500 depth 8 litres x 8 litres or x 7/6/3 litres 7/ 6/3 litres Cabinet width (mm) x 8 litres or x 7/6/3 litres COMPLETE SETS - DARK GREY FINISH Total capacity (ltr) Waste bin components (ltr) 5 x 8 and x x 8 and x x 8 and x x x 8 and x x x 8 and x x 8 and x x x Note > Each set includes Hanging Frame, Lid Cover Plate, Cover Plate Suspension Rails and Individual Waste Bin Pails > All dimensions allow for 6 mm side panels. > Alto drawer set to be ordered separately.

13 WASTE BINS WASTE BINS ONEFIVE WASTE BIN SYSTEM Cabinet width 5.5 ONEFIVE WASTE BIN SYSTEM WASTE BIN PAILS Width Min Depth 6 * > > Material: Plastic and steel > > : Dark Grey > > Features: Pre-fitted frame elements, rigid frame construction, three dimensionally adjustable front support brackets, tight integration of the hanging frame in the drawer, same height level of drawer, hanging frame and bins, waste bags strongly fixed by means of carrying handles FLEXIBLE HANGING FRAMES 00 width 500 depth 5.5/8 litres /7/ 6/3 litres width 500 depth x 8 litres or x /7/6/3 litres x 8 litres or x /7/6/3 litres > > Area of application: For hanging waste bin pails in Alto drawers with a depth of 500 mm Cabinet width (mm) * * LID COVER PLATE SUSPENSION RAIL > > Area of application: For use with lid cover plates For mounting lid cover plate into cabinet > > Features: Unhanded ( pieces required per lid per cover plate) Height > > Area of application: For use with OneFive bin frames > > Features: With folding handles to hold waste bag Capacity (ltr) Dimensions(W x D x H) 8 30 x 5 x x 30 x x 30 x x 30 x LID COVER PLATES > > Area of application: For use with hanging frames > > Features: Lid functions as a shelf Cabinet width (mm) Packing: set *UPDATED.7 3

14 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 WASTE BINS ONEFOUR WASTE BIN SYSTEM XXXL WASTE BIN SET l 9 l 75 9 l 9 l 9 l 9 l 9 30 l l 9 l 30 l 9 l 30 l 30 l 30 l 30 l 30 l > > Area of Application: Suitable for Alto drawers with a depth of 500 mm > > Material: Plastic > > Colour: Light Grey > > Height (mm): Min. 80 To suit cabinet Bin capacity (ltr) width (mm) 500 x and x x, x 3.5 and x Packing: set 77 Supplied with: > Fixing materials 30 > > Area of Application: For installation with Alto drawers with a depth from 50 mm > > Material: Frame: Steel Pails: Plastic > > : White powder coat and Grey > > Height (mm): Min. 30 > > Suitable For: All Alto drawers with a depth of 50 mm and above To suit cabinet Bin capacity (ltr) width (mm) 50 x x 9 and x x Packing: set 00 Supplied with: > Fixing materials > x 30 ltr individual pail lid for and

15 DRAWER INSERTS CUISIO CUTLERY TRAY FOR ALTO DRAWERS END PANEL 8 73 > > Area of application: For use on the side of drawer inserts, when the drawer is wider than the cutlery insert and only one insert is required > > Material: Plastic > > Version: Suitable for left or right side > > Mounting: Slides into cutlery insert > > Area of application: Suitable for Alto drawers with a depth of 500 mm > > Material: Plastic (injection moulded) and aluminium / stainless steel profiles > > : White translucent and Silver; or Graphite translucent and Stainless steel > > For carcase width (mm): > > Depth (mm): 73 > > Height (mm): 55 White translucent For carcase width (mm) Actual tray width (mm) Graphite translucent White Translucent Graphite Translucent KNIFE BLOCK 9 () > > Material: Plastic > > Colour: Grey > > Features: For three or four knives > > Mounting: Sits in cutlery tray For compartment width (mm) For number of knives Packing: pair 5 3 White translucent Graphite translucent Tray configuration

16 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 Fineline Drawer Accessories Cutlery Trays and Accessories Fineline MosaiQ Who would have thought that the inside of drawers and pull-outs could be so tidy, functional and individual. FineLine MosaiQ is fun to plan and work with. Made with a material mix of warmly attractive wood and fine metal, the range creates a contemporary, high-end look and a balanced, visual link to carefully chosen kitchen fronts. Oak & Ash es American natural oak and European black ash are the woods we choose to work with. Because they cover a wide range from pale to dark shades, because they offer any number of combination options and because of the distinctive grains and their outstanding workability. They look wonderful and will function perfectly through many years of use. 5A UPDATED 0.7

17 FINELINE DRAWER INSERTS CUTLERY INSERT MULTIFUNCTION INSERT Drawer depth (mm): 500 Dimensions (mm): 300 x 7 x 9 (WxDxH) Drawer depth (mm): 500 Dimensions (mm): 5 x 7 x 9 (WxDxH) Black Ash Natural Oak SPACER ELEMENT CROSS INSERT Black Ash Natural Oak Area of application: Allows FineLine Mosaiq to be used for Nova Pro drawers Drawer depth (mm): 500 Dimensions (mm) Up to cabinet width 600 mm Black Ash x 8 x 9 (WxDxH) Natural Oak Up to cabinet width 00 mm Black Ash x 8 x 9 (WxDxH) Natural Oak DEPTH EXTENSION Area of application: Allows FineLine Mosaiq to be used in deeper drawers Drawer depth (mm): Dimensions (mm) Up to cabinet width 600 mm Black Ash x 50 x 9 (WxDxH) Natural Oak Up to cabinet width 00 mm Black Ash x 50 x 9 (WxDxH) Natural Oak Area of application: For multifunction insert Drawer depth (mm): 500 Dimensions (mm): 37 x 7 x 37.5 (WxDxH) KNIFE BLOCK Area of application: For multifunction insert Drawer depth (mm): 500 Dimensions (mm): 37 x 7 x 6 (WxDxH) Black Ash Natural Oak Black Ash Natural Oak UPDATED.7 5B

18 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 FINELINE DRAWER INSERTS SPICE INSERT DRAWER BOX Area of application: For multifunction insert Drawer depth (mm): 500 Dimensions (mm): 37 x 7 x 6 (WxDxH) Black Ash Natural Oak (3 part) Drawer depth (mm): 500 Dimensions (mm): 36 x 36 x 9 (WxDxH) Black Ash Natural Oak TWIN FOIL ROLL HOLDER Area of application: For multifunction insert Suitable for: Compatible with 30 cm roll length only Drawer depth (mm): 500 Dimensions (mm): 37 x 7 x 5 (WxDxH) Black Ash Natural Oak CROSS INSERT FOR DRAWER BOX Dimensions (mm): PLATE RACK Dimensions (mm): Black Ash Natural Oak x 80 x 8 (WxDxH) Graphite black Note: drawer boxes equal the depth of a cutlery insert. x x 3 (WxDxH) 5C UPDATED.7

19 FINELINE DRAWER INSERTS DRAWER TRAY WOODEN BOX Drawer depth (mm): 500 Dimensions (mm): 300 x 7.5 x 9 (WxDxH) Black Ash Natural Oak Note: Drawer Trays equal the depth of a cutlery insert. Drawer depth (mm): 500 Dimensions (mm): 36 x 36 x 0 (WxDxH) Black Ash Natural Oak Note: Wooden Boxes equal the depth of a cutlery insert. STORAGE BOX Dimensions (mm): METAL DIVIDER U-SHAPED FOR DRAWER TRAY / STORAGE BOX : Version Dimensions WxDxH (mm) Drawer Tray 07.5 x x Storage Box 08 x 0 x x 7.5 x 8 (WxDxH) Black Ash Natural Oak Graphite black WOODEN BOX Drawer depth (mm): 500 Dimensions (mm): 36 x 7 x 0 (WxDxH) Black Ash Natural Oak METAL DIVIDER FOR WOODEN BOX Dimensions (mm): Graphite black x 99 x 0 (WxDxH) Note: Oak finish shown for all timber products. *UPDATED.7 5D

20 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 DRAWER INSERTS CONNECT DRAWER INSERT CONNECT A Dark Grey Light Grey Packing: kit Supplied with: > x Connect 0/0 tray > x Connect 0/0 twin dividers > x Connect 0/0 angle divider (left) > x Connectors > x Non-slip mat CONNECT B > > Area of application: Suitable for Alto drawers with a depth of 50 or 500 mm > > Material: Plastic > > : Light Grey or Dark Grey > > Features: Uses a practical 5 mm grid system to create a unique and customised drawer dividing system Includes non-slip mat with every version (size: 56 x 80 mm) Tray 0/0 Tray 30/0 Twin Divider 0/0 Angle Divider Left and Right 0/0 Connector Non-Slip Mat Dark Grey Light Grey Packing: kit CONNECT C Dark Grey Light Grey Packing: kit CONNECT D Dark Grey Light Grey Packing: kit Supplied with: > x Connect 0/0 tray > x Connect 0/0 angle divider (left) > 5 x Connectors > x Non-slip mat Supplied with: > x Connect 0/0 tray > x Connect 0/0 angle dividers ( x left and x right) > 3 x Connectors > x Non-slip mat Supplied with: > x Connect 30/0 tray > x Connect 0/0 angle dividers ( x left and x right) > 3 x Connectors > x Non-slip mat 6

21 DRAWER INSERTS STAINLESS STEEL CUTLERY TRAYS FOR ALTO DRAWERS DRAWER INSERTS STAINLESS STEEL DRAWER ORGANISER FOR ALTO DRAWERS > > Area of application: Suitable for Alto drawers with a depth of 500 mm > > Depth (mm): 7 > > Height (mm): 6 > > Material: Stainless steel and plastic, grey > > Area of application: Suitable for all Alto drawers with a depth of 500 mm > > Depth (mm): 7 > > Height (mm): 6 > > Material: Stainless steel and plastic, grey To suit cabinet Configuration width (mm) 00/50 x A x A x B x A x A x A, x B x A, x B x A, x C Packing: set A B C Note: Cutlery tray configurations will not fit the entire drawer width, but have been designed to provide a space left or right of the tray for long utensils. To suit cabinet Configuration width (mm) 00/50 x A x B x B x A x A, x B x B x B x A A B Note: Drawer organiser configurations will not fit the entire drawer width, but have been designed to provide a space left or right of the organiser for long utensils. 7

22 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 DRAWER INSERTS DRAWER INSERT WITH NON-SLIP SURFACE HEIGHT 0 MM For cabinet width Packing: Piece HEIGHT 5 MM > > Area of application: Suitable for drawers with a depth of 500mm > > Material: Plastic > > Colour: Anthracite pearl > > Features: Non-slip surface > > For nominal length (mm): 500 > > Height (mm): 0 or 5 > > Depth (mm): mm > > Installation: For cutting to size For cabinet width Packing: Piece DIVIDER For cabinet width 500 mm For cabinet width 800 mm For cabinet width 600 mm For cabinet width 900 mm > > Area of application: For subdividing cutlery insert with height of 5 mm > > Material: Plastic > > Height (mm): 50 Colour Anthracite Packing: Piece 7A UPDATED.7

23 PAGE RESERVED FOR NEW PRODUCT UPDATED.7 7B

24 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 DRAWER INSERTS AGO VARIO CUTLERY TRAY CARBON FIBRE FINISH > > Area of application: Suitable for Alto drawers with a depth of 500 mm > > Material: Plastic (vacuum formed) > > : Silver - grey, white texture, carbon fibre or stainless steel > > Depth (mm): 90 (can be trimmed to 0) > > Height (mm): 50 > > Thickness (mm):.5 To suit cabinet Tray width (mm) width (mm) D E F G SILVER - GREY FINISH STAINLESS STEEL FINISH To suit cabinet Tray width (mm) width (mm) A B C D E F G H WHITE TEXTURE FINISH To suit cabinet Tray width (mm) width (mm) A B C D E F G H To suit cabinet Tray width (mm) width (mm) D E F G

25 DRAWER INSERTS AGO VARIO ACCESSORIES KNIFE BLOCK DIVIDER > > Material: Multiplex beech > > : Lacquered > > Fixing Method: Self-adhesive > > Material: Multiplex beech > > : Lacquered > > Fixing Method: Self-adhesive SPICE JAR INSERT 3 Configuration examples A B > > Area of Application: For spice jars with Ø55 mm > > Material: Multiplex beech > > : Lacquered > > Drilling Diameter (mm): Ø57 Number of spice jars SPICE JAR - WITH GLASS LID > > Area of Application: Suitable for spice jar insert > > Material: Lead crystal glass, lid, rubber sealing ring > > : Clear > > Version: Lid with sealing ring > > Diameter (mm): Ø55 at base, Ø6 at lower edge of glass Ø6 with glass edge > > Height (mm): 58 with lid, 50 without lid C E G H D F 3 3 9

26 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 DRAWER INSERTS EXZELLENT II CUTLERY TRAY Nominal length 50 mm For cabinet width (mm) Nominal length 50 mm Nominal length 500 mm Nominal length 500 mm > > Area of application: Suitable for Alto drawers with a depth of 50 and 500 mm > > Material: Plastic > > Thickness (mm):.5 > > Height (mm): 57 0

27 DRAWER INSERTS ALL ROUNDER CUTLERY TRAY BASIC CUTLERY TRAY > > Area of application: Suitable for Alto drawers with a depth of 00 mm and 50 mm > > Material: Plastic (vacuum formed) > > : White textured > > Height (mm): 5 > > Thickness (mm): > > Area of application: Suitable for Alto drawers with a depth of 500 mm > > Material: Plastic (vacuum formed) > > Thickness (mm):.5 > > : White grained > > Version: With wide edge for cutting to exact drawer size > > Height (mm): 5 30/60 Insert width (mm) Insert depth (mm) Packing: 5 pieces EXZELLENT UTENSIL TRAY A B C > > Area of application: Suitable for Alto drawers with a depth of 50 mm and 500 mm > > Material: Plastic (vacuum formed) > > Colour: White grained > > Version: With wide edge for cutting to drawer size > > Height (mm): 57 > > Thickness (mm):.5 For carcase width (mm) A B C For carcase width (mm) A B C D D A B C

28 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 DRAWER INSERTS SALSA CUTLERY AND SPICE TRAY SPICE DRAWER TRAY > > Area of application: Suitable for Alto drawers with a depth of 500 mm > > Material: Plastic (vacuum formed) > > : White textured or silver textured > > Height (mm): 50 > > Thickness (mm):.5 To suit cabinet width (mm) Insert width (mm) White textured Silver textured A B C D E F Dimensions (mm) A D F B E C > > Area of application: For storage of spice jars > > Material: Plastic (vacuum formed) > > : White, gloss > > Size (mm): 300 x 550 (W x D) > > Inside drawer height (mm): Min. 83 > > Thickness (mm): 3 PLATE RACK > > Area of application: Suitable for Alto drawers with a depth of 500 mm > > Material: Plastic (vacuum formed) > > : Silver, matt > > Size (mm): 80 x 90 (W x D) > > Height (mm): 60 > > Thickness (mm):

29 DRAWER MATS ANTI-SLIP MATS DRAWER INSERTS CUISIOFLEX > > Material: Polystyrene/rubber > > Colour: White or silver coloured > > : Napped > > Width (mm): 550 Length Colour White mm Silver White mtr INSERT MAT WITH STRIPS Silver coloured grained Light Grey Anthracite > > Material: Plastic > > Version: Insert mat with non-slip rubber strips, can be cut to fit any length and width /colour Dim. (mm) 50 x x Mat: Silver coloured grained Rubber strips: Black Mat: Maple effect Rubber strips: Silver coloured Maple effect 50 x x *White translucent shown > > Area of application: For organising plates, dishes, pots and pans and other kitchen items > > Material: Plastic > > Features: Subdivision frame with telescopic adjustability Flexible for use in all popular drawer sizes and styles Set of two expandable frames White translucent with white corners Graphite translucent with graphite corners

30 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 UNDERSINK ORGANISER BANIO ORGANISATION SYSTEM BANIO FIXING RAIL Storage tray (order separately) Rear bracket (included with Frame Set) 8 x 68 8 x 5 8 x Ø 6.9 max. BANIO FRAME SET 30-8 mm 0-83 mm Ø 6.9 max. Frame Set Fixing rail ( included with Frame Set) > > Area of application: Suitable for Alto undersink drawers > > Version: Length and width adjustable by cutting the centre and side components > > Material: Plastic > > : White or Dark Grey > > Supplied with: x side components x centre component x positioning strips x rear panel brackets White Dark Grey Packing: 0 pieces > > Dimensions (mm): 505 x 7 x 8 (L x H x D) > > Features: Fix to flat surface such as cabinet wall with double-sided adhesive tape or glue (ensure adhesive used is suitable for application) > > Material: Plastic > > : White or Dark Grey White Dark Grey BANIO STORAGE TRAYS > > Suitable for: Banio frame set, fixing rail or free standing > > Version: Robust and easy to clean > > Material: Plastic > > : White or Graphite translucent > > Dimensions (mm): Small tray: 65 x 8 x 8 Medium tray: 65 x 68 x 8 Large tray: 65 x 5 x 8 Size Small White translucent Medium Large Graphite translucent Small Medium Large

31 ALTO SOFT CLOSE DRAWER TECHNICAL INFORMATION Cutting dimensions - Alto 86 Drawer Bottom panel width = ICW mm Bottom panel length = Runner length - 5 mm Panel height = 70 mm Back panel width = ICW mm Cutting dimensions - Alto 0 Drawer Bottom panel width = ICW mm Bottom panel length = Runner length - 5 mm Panel height = 0 mm Back panel width = ICW mm ICW 6 mm material thickness ICW: Internal cabinet width ICW 6 mm material thickness ICW: Internal cabinet width Cutting dimensions - Alto 6 Drawer Bottom panel width = ICW mm Bottom panel length = Runner length - 5 mm Panel height = 8 mm Back panel width = ICW mm Cutting dimensions - Alto 0 Drawer Bottom panel width = ICW mm Bottom panel length = Runner length - 5 mm Panel height = 88 mm Back panel width = ICW mm ICW 6 mm material thickness ICW: Internal cabinet width Drawer Base Drilling (Varianta Screws) mm 96mm 68mm 0mm 0mm Ø5mm for Varianta Screw ICW 6 mm material thickness ICW: Internal cabinet width 5

32 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 ALTO SOFT CLOSE DRAWER TECHNICAL INFORMATION Cabinet End Panel Drilling Dimensions (mm) Dimension A = 56 mm plus overlay Dimension B = Dimension A plus drawer front plus gap Dimension C = Dimension B plus drawer front plus gap Dimension D = Dimension C plus drawer front plus gap D C B A 37 Runner Drilling Dimensions (mm) 37* *Dimension is mm for internal drawer application 9 6

33 ALTO SOFT CLOSE DRAWER INSTALLATION INSTRUCTIONS WHAT S IN THE BOX C H X E D A F B mm 5* 3 3 5* 5* * P DRAWER FRONT DRILLING Alto 86 mm Alto 0 mm 0* Alto 6 mm 0* LW-0 LW-0 LW-0 Ø0 Ø0 G J X *plus overlay Alto 0 mm 5* * 0* LW-0 LW-0 K Ø0 L 7

34 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 ALTO SOFT CLOSE DRAWER INSTALLATION INSTRUCTIONS 86 MM DRAWER SIDE DIMENSIONS 0 mm ± ±0.5 0 MM DRAWER SIDE DIMENSIONS mm mm mm ± ±0.5 6 MM DRAWER SIDE DIMENSIONS ± ±0.5 0 MM DRAWER SIDE DIMENSIONS ± ±

35 ALTO SOFT CLOSE DRAWER INSTALLATION INSTRUCTIONS A NL + 6 B 56 mm NL LW T=6mm H86 and H0 C LW - 89 ± 0.5 H6 and H0 E K E L L C D D E mm Calculation of H dimension: Alto 86 mm, H = 70 Alto 0 mm, H = 0 Alto 6 mm, H = 8 Alto 0 mm, H = 88 K H H86 and H0 3 8X 8X mm T=6mm F LW - 75 ± 0.5 H6 and H0 NL 5 ± 0.5 Note: Dimensions based on 6 mm board thickness 9

36 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 ALTO SOFT CLOSE DRAWER INSTALLATION INSTRUCTIONS I z G I 3 Ø/ z= +0.5 G G J H 3 Ø0/ z= LW G J H H86 and H0 H6 and H0 Q LW - 7 x.0 H 3 LW-87 P x 3.0 LW-87 P H Note Use same method to remove both internal and external drawer fronts. 30

37 ALTO SOFT CLOSE DRAWER INSTALLATION INSTRUCTIONS 5 mm (APPLIES ONLY TO H6 AND H0) O ± ± 3

38 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 ONEFIVE WASTE BIN SYSTEM INSTALLATION INSTRUCTIONS x x D x 7 x x x x 3

39 ONEFIVE WASTE BIN SYSTEM INSTALLATION INSTRUCTIONS

40 HÄFELE - ALTO DRAWER SYSTEMS / 09.7 INDEX

41

42 ALTO DRAWER SYSTEMS Häfele Australia Pty. Ltd. 8 Monterey Road Dandenong Victoria 375 Phone: Fax: (03) info@hafele.com.au Häfele New Zealand Ltd. 6 Accent Drive East Tamaki Auckland 03 Phone: info@hafele.co.nz HÄFELE LOCATIONS: Australia I MELBOURNE I SYDNEY I NEWCASTLE I BRISBANE I ADELAIDE I LAUNCESTON I HOBART I PERTH New Zealand I AUCKLAND I WELLINGTON I CHRISTCHURCH