7. Industrial Cylinder Heated Drying Ironers FCU 1664/320, FCU 2080/320. Features and Benefits. Options. preferred by on-premises laundries worldwide

Transcription

1 7. Industrial Cylinder Heated Drying Ironers FCU 1664/320, FCU 2080/320 Features and Benefits Large surface contact with linen over an angle of 300 Highly polished steel, thin cylinder Reasonable price Rapid response to temperature Excellent thermal conductivity Emergency button and Main switch in one Finger protection bar for even more safety Durable Nomex ironing belts Extra heavy press roller for high-quality ironing Patented direct drive: maintenance-free system Patented central suction system with maintenance-free operation Automatic cool down Easy to operate microprocessor Frequency controlled motor Preset temperature indicator Space-saving installation against the wall is possible: front return Exhaust outlet back Electric or gas heating Metal fibre premix burner (for Gas only) Ergonomic design Overheating check system (OCS) with 3 temperature sensors Options Chrome-plated cylinder for better thermal conduction and ironing quality Pedal of insert table stop system Exhaust output on the right Fixation set for mounting to the floor

2 TYPE FCU 1664/320 E FCU 2080/320 E FCU 1664/320 G FCU 2080/320 G ROLLER DIAMETER mm USEFUL ROLLER LENGTH mm CAPACITY* kg/h SPEED m/min 1-6 HEATING Electric kw Gas** kw MOTOR Roller motor kw Fan motor kw 0,095 (50 Hz) / 0,125 (60 Hz) Others kw ,17 Max. temperature C 180 Consumption of electricity kwh 21,4 27,3 Consumption of gas m 3 /h 2,62 3,13 Gas types G20, G25, G30, G31, G110 Max. gas pressure mbar 60 Noise level db (A) < 57 Ingress protection IP42 3x V +N 50/60 Hz ELECTRIC CONNECTION 3x V 50/60 Hz 3x /440 V 50/60 Hz 1x V 50/60 Hz DIMENSIONS HxWxD mm 1110x2084x x2500x x2084x x2500x755 Netto weight kg Carton packing HxWxD mm 1260x2190x x2610x x2190x x2610x800 Brutto weight kg * According to ISO , ** For the G20, 20 mbar CPS COIN OPL G (FCU 1664/320), 2500 (FCU 2080/320) OPL COIN, CPS (FCU 1664/320), 2080 (FCU 2080/320) OPL COIN, CPS G (G 3/4") 382-E 407-G G G UniMac preserves the right to change the machines and the specification in this leaflet at any time, without prior notice. Details and photographs are only for information and never binding.

3 7. Industrial Cylinder Heated Drying Ironers FCU 1600/500, FCU 2000/500, FCU 2600/500, FCU 3200/500 Features and Benefits Large surface contact with linen over an angle of Finger protection and emergency button for more safety Durable NOMEX ironing belts Automatic cooldown Easy to operate microprocessor: 20 pre-set ironing programmes Indication of ironing speed and temperature Reverse mode possible Frequency controlled motor Easy to remove lint filters Space saving installation against the wall is possible: front return Electric, gas or steam heating Overheating check system with 3 temperature sensors Options Foot pedal for easy start and stop operation Chrome-plated cylinder for a better thermal conduction

4 TYPE FCU 1600/500 FCU 2000/500 FCU 2600/500 FCU 3200/500 ROLLER DIAMETER mm USEFUL ROLLER LENGTH mm HEATING Electric heating kw Gas heating kw Steam heating kg/h MOTOR Roller motor kw 0,37 0,37 0,37 0,37 Fan motor kw 0,18/0,255 0,18/0,255 2x0,18/0,255 2x0,18/0,255 Exhaust ventilation mm 1x150 1x150 2x150 2x150 IRONING CAPACITY* Electrical & Gas heating kg/h Steam heating kg/h ROLLER SPEED m/min. 1,5-8 1,5-8 1,5-8 1,5-8 ELECTRIC CONNECTION 3x V 50/60Hz 3x V+N 50/60Hz DIMENSIONS HxWxD mm 1232x2350x x2750x x3350x x3950x992 TRANSPORT DATA Gross weight kg Net weight kg Volume (crate packed) m 3 4,24 4,97 6,00 7,03 Crate packing HxWxD mm 1550x2490x x2890x x3490x x4090x1100 * Tested in accordance of ISO , The data concerning dimensions of machines include all extended parts FRONT FCU500 COINMETER COINMETER TOP FCU500 B ACK M ODEL E BACK MODEL S B ACK M ODEL G S IDE 1. Coinmeter (only for version with coinmeter) 2. Control panel 3. Upper cover 4. Emergency stop 5. Manual drive of roller 6. Ironing belts 7. Exhaust ventilation (2 for FCU 2600/500,FCU 3200/500) 8. Pedal used for starting/stopping belts movement (only for version OPL) 9. Pedal microswitch (only for version OPL) 10. Coin container (only for coin version) 11. Insertion belts/feeding table 12. Cover of filter sieve 13. Name plate 14. Condense drain G 3/4 (only for version S ) 15. Main switch 16. Upper trough 17. Steam supply G 3/4 (only for version S ) 18. External protective connector 19. Lower trough 20. Bolts of side cover 21. Main power supply 22. Gas supply G 3/4 (only for version G ) 23. Electric power supply for heating system (version E only) UniMac preserves the right to change the machines and the specification in this leaflet at any time, without prior notice. Details and photographs are only for information and never binding.

5 7. Industrial Cylinder Heated Drying Ironers FCU 3186/800, FCUR 3186/800, FCUF 3186/800, FCUFF 3186/800 Features and Benefits Large surface contact with linen Finger protection and emergency button for more safety Automatic cooldown Easy to operate microprocessor Overdimensioned fan for flexible installation Indication of ironing speed and temperature Reverse mode possible Frequency controlled motor Space saving installation against the wall is possible: front return Electric, gas or steam heating Overheating check system Options Stop pedal Optional modules Module R (FCUR800) Frontal and rear output Module F (FCUF800) module R with length folding Optional modules can be retrofitted to existing FCU800 ironers

6 TYPE FCU 3186/800 FCUR 3186/800 FCUF 3186/800 FCUFF 3186/800 ROLLER DIAMETER mm USEFUL ROLLER LENGTH mm CAPACITY* kg/h SPEED / SPEED II** m/min 3-15 / 3-8 HEATING Electric heating kw Gas heating*** kw Steam heating kg/h MOTOR Roller motor kw 0,75 0,75 0,75 0,75 Fan motor kw 2 x 0,55/0,75 (50/60 Hz) Others kw 0,2 0,3 0,4 1,1 Fan capacity m 3 /h 2 x 1300 Max. temperature C 180 Consumption of electricity kwh 65,9 66,1 66,2 66,9 Consumption of gas m 3 /h 11,40 11,40 11,40 11,40 Consumption of steam kg/h Gas types G20, G25, G30, G31 Max. gas pressure mbar Noise level db (A) < 75 Ingress protection IP 42 ELECTRIC CONNECTION V 3AC+N 50/60 Hz V 3AC 50/60 Hz V 3AC-N 50/60 Hz 440V-480 3AC 60 Hz DIMENSIONS HxWxD mm 1985x4260x x4260x x4260x x4260x2010 Netto weight kg E 2610 / G 2480 / S 2900 E 2860 / G 2730 / S 3150 E 2970 / G 2840 / S 3260 E 3170 / G 3040 / S 3460 Carton packing HxWxD mm 2080x4380x2080 Brutto weight kg E 2870 / G 2740 / S 3160 E 3120 / G 2990 / S 3410 E 3230 / G 3100 / S 3520 E 3430 / G 3300 / S 3720 * According to ISO , **Lengthwise folding activated, *** G20, 20 mbar UniMac preserves the right to change the machines and the specification in this leaflet at any time, without prior notice. Details and photographs are only for information and never binding.

7 7. Industrial Cylinder Heated Drying Ironers with Front & Rear Return FCUR and Length Folding FCUF FCUR 2000/500, FCUR 2600/500, FCUR 3200/500, FCUF 2000/500, FCUF 2600/500, FCUF 3200/500 Features and Benefits Large surface contact with linen over an angle of 300º Finger protection and emergency button for more safety Durable NOMEX ironing belts Automatic cooldown Easy to operate microprocessor: 20 pre-set ironing programmes Indication of ironing speed and temperature Reverse mode possible FCUR model: front and rear output troughs FCUF model: front output table Variable setups for folding (FCUF) FCUF model: integrated length folder model Frequency-controlled motors Easy to remove lint filters Standard anti-static bar (FCUF) Patented integrated length folding requires less maintenance (no ribbons and rolls) Electric, gas or steam heating Overheating check system with 3 temperature sensors Options Foot pedal for easy stop and start operation Rear output table (FCUF) Output table (FCUR) Chrome-plated cylinder for a better thermal conduction

8 TYPE FCUF/ FCUR 2000/500 FCUF/ FCUR 2600/500 FCUF/ FCUR 3200/500 ROLLER DIAMETER mm USEFUL ROLLER LENGTH mm HEATING Electric heating kw Gas heating kw Steam heating kg/h MOTOR Roller motor kw 0,37 0,37 0,37 Fan motor kw 0,18/0,255 2x0,18/0,255 2x0,18/0,255 IRONING CAPACITY* Electrical & Gas heating kg/h Steam heating kg/h ROLLER SPEED m/min. 1,5-8 1,5-8 1,5-8 ELECTRIC CONNECTION 3x V+N 50/60Hz 3x V 50/60Hz DIMENSIONS HxWxD mm 1568x2750x x3350x x3950x1185 TRANSPORT DATA Gross weight (Crate packing) kg Net weight kg Volume (packed) Crate packing m 3 7,67 9,2 10,76 Crate packing HxWxD mm 1900x2976x x3576x x4176x1356 * Tested in accordance of ISO , The data concerning dimensions of machines include all extended parts FRONT FCUF/FCUR TOP FCUF/FCUR BACK FCUF/FCUR MODEL S FCUF/FCUR 2000/500 FCUF/FCUR 2600/500 FCUF/FCUR 3200/500 SIDE FCUF SIDE FCUR MODEL E MODEL G 1. Control panel 2. Upper cover 3. Centralstop 4. Manual drive of roller 5. Exhaust ventilation 6. Pedal used for starting/stopping belts movement (according to order, only for version OPL) 7. Pedal microswitch (according to order, only for version OPL) 8. Feeding belts/feeding table 9. Cover of filter sieve 10. Name plate 11. Condense drain G 3/4 (only for version S ) 12. Main switch 13. Upper trough 14. Steam supply G 3/4 (only for version S ) 15. External protective connector 16. Output tilting table - front 17. Bolts of side cover 18. Main supply of electric power 19. Gas supply G 3/4 (only for version G ) 20. Power supply for heating system (only for version E ) 21. Output tilting table - rear (according to order) 22. Output tilting trough - front 23. Output tilting trough - rear UniMac preserves the right to change the machines and the specification in this leaflet at any time, without prior notice. Details and photographs are only for information and never binding.

9 7. industrial Cylinder Heated Drying Ironers with Integrated Feeding and Length Folding FCUFF 2000/500, FCUFF 2600/500, FCUFF 3200/500 Features and Benefits Large surface contact with linen overan angle of 300º Finger protection and emergency button for more safety Durable NOMEX ironing belts Automatic cooldown Easy to operate microprocessor: 20 pre-set ironing programmes Indication of ironing speed and temperature Reverse mode possible Variable setups for folding Built-in feeding and length folding system Frequency controlled motor Easy to remove lint filters Standard anti-static bar Patented integrated length folding requires less maintenance (no ribbons and rolls) Electric, gas or steam heating Options Crossfolder and stacker Chrome-plated cylinder for a better thermal conduction

10 TYPE FCUFF 2000/500 FCUFF 2600/500 FCUFF 3200/500 ROLLER DIAMETER mm USEFUL ROLLER LENGTH mm HEATING Electric heating kw Gas heating kw Steam heating kg/h MOTOR Roller motor kw 0,98 1,2 1,2 Fan motor kw 0,18/0,255 2x0,18/0,255 2x0,18/0,255 IRONING CAPACITY* Electrical & Gas heating kg/h Steam heating kg/h Residual moisture % ROLLER SPEED m/min. 1,5-8 1,5-8 1,5-8 ELECTRICAL CONNECTION 3x V+N 50/60Hz 3x V 50/60Hz COMPRESSED AIR CONNECTION** inch exterior: 1/2 - interior: 1/4 DIMENSIONS Ironer HxWxD unpacked mm 1760x2850x x3450x x4050x1320 Crossfolder HxWxD unpacked mm x3430x x4020x870 Stacker HxWxD unpacked mm x2750x x2750x1040 TRANSPORT DATA Net/gross weight kg 1720/ / /2770 Ironer HxWxD packed mm 1990x2990x x3590x x4190x1370 Cross-folder net/gross kg - 515/ /810 Crossfolder HxWxD packed mm x3740x x4340x1050 Stacker net/gross kg - 290/ /490 Stacker HxWxD packed mm x3044x x3044x1244 * Tested in accordance of ISO ** Compressor not included The data concerning dimensions of machines include all extended parts FRONT FCUFF 500 TOP FCUFF SIDE FCUFF 500 FRONT CROSSFOLDER BACK STACKER 1. Feeder button 2. Control panel 3. Upper cover 4. Emergency stop 5. Handle of manual drive 6. Telescopic brushes 7. Exhaust ventilation 8. Filter 9. Electric distributor 10. Suspension eyes 11. Feeding belts 12. Feeder 13. Production label 14. Condense drain (version S ) 15. Main switch 16. Front trough 17. Steam supply (version S ) 18. External protective connector 19. Folding table 20. Side cover lock 21. Main power supply 22. Gas supply (version G ) 23. Pressure air supply 24. Power supply connector for the cross folder 25. Connector for control cable for the cross folder 26. Pressure air connector for the cross folder 27. Power supply connection for the stacker 28. Control cable connection for the stacker 29. Pressure air connection for the stacker 30. Sight glass of burner (version G ) UniMac preserves the right to change the machines and the specification in this leaflet at any time, without prior notice. Details and photographs are only for information and never binding.