Transcription

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15 UL iq for Plastics 第 1 頁, 共 1 頁 Component - Plastics E56070 CHI MEI CORPORATION 59-1 SAN CHIA, JEN TE, TAINAN HSIEN 717 TW PA-765A(+) Acrylonitrile Butadiene Styrene (ABS), "Polylac", furnished as pellets Min Thk Flame RTI RTI RTI Color (mm) Class HWI HAI Elec Imp Str ALL 1.5 V V-0, 5VB V-0, 5VA V-0, 5VA Comparative Tracking Index (CTI): 1 Dimensional Stability (%): - High-Voltage Arc Tracking Rate (HVTR): 2 High Volt, Low Current Arc Resis (D495): 7 Dielectric Strength (kv/mm): - Volume Resistivity (10 x ohm-cm) : - (+) - Optional prefix or suffix; may be used to denote usage of percent acid scavengers. ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL. Report Date: Last Revised: Underwriters Laboratories Inc IEC and ISO Test Methods Thickness Test Name Test Method Units Tested (mm) Value Flammability IEC , IEC Class (color) 1.5 V-1 (ALL) 2.1 V-0, 5VB (ALL) 2.5 V-0, 5VA (ALL) 3.0 V-0, 5VA (ALL) Glow-Wire Flammability (GWFI) IEC C - - Glow-Wire Ignition (GWIT) IEC C - - IEC Comparative Tracking Index IEC Volts (Max) - - IEC Ball Pressure IEC C - - ISO Heat Deflection (1.80 MPa) ISO 75-2 C - - ISO Tensile Strength ISO MPa - - ISO Flexural Strength ISO 178 MPa - - ISO Tensile Impact ISO 8256 kj/m ISO Izod Impact ISO 180 kj/m ISO Charpy Impact ISO kj/m Underwriters Laboratories Inc /6/9

16 UL iq for Plastics 第 1 頁, 共 1 頁 Component - Plastics E56070 CHI MEI CORPORATION 59-1 SAN CHIA, JEN TE, TAINAN HSIEN 717 TW PA-777D Acrylonitrile Butadiene Styrene/Phenyl Maleimide (ABS/PMI), "Polylac", furnished as pellets Min Thk Flame RTI RTI RTI Color (mm) Class HWI HAI Elec Imp Str ALL HB Comparative Tracking Index (CTI): 1 Dimensional Stability (%): - High-Voltage Arc Tracking Rate (HVTR): 0 High Volt, Low Current Arc Resis (D495): 7 Dielectric Strength (kv/mm): - Volume Resistivity (10 x ohm-cm) : - ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 smallscale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL. Report Date: Last Revised: Underwriters Laboratories Inc IEC and ISO Test Methods Thickness Test Name Test Method Units Tested (mm) Value Flammability IEC Class (color) HB75 (ALL) Glow-Wire Flammability (GWFI) IEC C - - Glow-Wire Ignition (GWIT) IEC C - - IEC Comparative Tracking Index IEC Volts (Max) - - IEC Ball Pressure IEC C - - ISO Heat Deflection (1.80 MPa) ISO 75-2 C - - ISO Tensile Strength ISO MPa - - ISO Flexural Strength ISO 178 MPa - - ISO Tensile Impact ISO 8256 kj/m ISO Izod Impact ISO 180 kj/m ISO Charpy Impact ISO kj/m Underwriters Laboratories Inc /4/9

17 UL iq for Plastics 第 1 頁, 共 1 頁 Component - Plastics E41938 E I DUPONT DE NEMOURS & CO INC ENGINEERING POLYMERS, CHESTNUT RUN PLAZA, PO BOX 80713, WILMINGTON DE G33L(+) Polyamide 66 (PA66), glass reinforced, "Zytel", furnished as pellets Min Thk Flame RTI RTI RTI Color (mm) Class HWI HAI Elec Imp Str ALL 0.71 HB HB HB Comparative Tracking Index (CTI): 0 Dimensional Stability (%): 1.1 High-Voltage Arc Tracking Rate (HVTR): 1 High Volt, Low Current Arc Resis (D495): 5 Dielectric Strength (kv/mm): 23 Volume Resistivity (10 x ohm-cm) : 13 (+) - Virgin and regrind up to 50% by weight inclusive, have the same basic material characteristics. NOTE - (1) Material designations that are color pigmented may be followed by suffix letters and numbers. (2) Material designations may be prefixed by "ZYT" for Zytel or "MIN" for Minlon or "ZEN" for Zenite or "DEL" for Delrin or "CRA" for Crastin or "RYN" for Rynite or "THX" for Thermx or "ETPV" for ETPV grades. ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 smallscale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL. Report Date: Last Revised: Underwriters Laboratories Inc IEC and ISO Test Methods Thickness Test Name Test Method Units Tested (mm) Value Flammability IEC Class (color) 0.71 HB75 (ALL) 1.5 HB75 (ALL) 3.0 HB40 (ALL) Glow-Wire Flammability (GWFI) IEC C - - Glow-Wire Ignition (GWIT) IEC C - - IEC Comparative Tracking Index IEC Volts (Max) - - IEC Ball Pressure IEC C - - ISO Heat Deflection (1.80 MPa) ISO 75-2 C - - ISO Tensile Strength ISO MPa - - ISO Flexural Strength ISO 178 MPa - - ISO Tensile Impact ISO 8256 kj/m ISO Izod Impact ISO 180 kj/m ISO Charpy Impact ISO kj/m Underwriters Laboratories Inc /4/13