C E R T I F I C A T E O F C O M P L I A N C E

Transcription

1 SA6635 SA September-08 SECURITRON MAGNALOCK CORP S 51ST ST, PHOENIX AZ COMPONENT - SPECIAL LOCKING ARRANGEMENTS See Addendum Page ANSI/UL 294, Access Control System Units, NFPA Life Safety Code, Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to. Look for the UL Certification Mark on the product. Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services Page 1 of 2

2 SA6635 SA September-08 the product as specified on this certificate were tested according to the current UL requirements. Models: Security Equipment:Special Exit Locks, models M670, M680BD, M680BDC, M680BDX, M680BDC2, M680BDCX, and M680BDC2X Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services Page 2 of 2

3 CERTIFICATE OF COMPLIANCE R13976 R September-29 Securitron Magnalock Corp S 51 st St Phoenix, AZ USA Auxiliary Locks Auxiliary Locks Certified for Canada ANSI/UL 10B, "Fire Tests of Door Assemblies." ANSI/UL 10C, "Positive Pressure Fire Tests of Door Assemblies." CAN/ULC-S104, "Standard Method for Fire Tests of Door Assemblies." Only those products bearing the UL Listing Mark should be considered as being covered by UL's Listing and Follow-Up Service. The UL Listing Mark generally includes the following elements: the symbol UL in a circle: with the word LISTED ; a control number (may be alphanumeric) assigned by UL; and the product category name (product identifier) as indicated in the appropriate UL Directory. Look for the UL Listing Mark on the product. William R. Carney, Director, North American Certification Programs Page 1 of 2

4 CERTIFICATE OF COMPLIANCE R13976 R September-29 the product as specified on this certificate were tested according to the current UL requirements. Auxiliary locks, Series M32, M34, M38, M62, M68, M82, SAM, SAM2-12, SAM2-24 with suffix letters C, DV, S, L, F or G, SAMSC, M32B, M34RB, M62B, M82B, SAMB, Electromagnet locks. All models may be prefixed with "FA", "D". Also evaluated in accordance with UL 10C for 1hr. Auxiliary locks, Series VM300, VM600, and VM1200 also evaluated in accordance with Standard UL 10C for 1/2 hr. and 1 hr. Model MM15. Series M370 and M380 also evaluated in accordance with Standard UL 10C for 3 hrs. Auxiliary locks, Series M670 and M680 also evaluated in accordance with Standard UL 10C for 3/4 hr. William R. Carney, Director, North American Certification Programs Page 2 of 2

5 BP7041 BP DECEMBER-09 SECURITRON MAGNALOCK CORP S 51ST ST PHOENIX AZ ACCESS CONTROL SYSTEM UNITS, SPECIAL LOCKING ARRANGEMENTS, SIGNAL APPLIANCES, MISCELLANEOUS CERTIFIED FOR CANADA USL, Security Equipment: Request to Exit Motion Detector and Locking Devices, models M680BDX, M680BDCX, and M680BDC2X. UL Access Control System Units Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. Look for the UL Certification Mark on the product. Bruce Mahrenholz, Director North American Certification Program contact a local UL Customer Service Representative at Page 1 of 1