DOE FUNDAMENTALS HANDBOOK INSTRUMENTATION AND CONTROL Volume 1 of 2
|
|
- Marcia Johnson
- 5 years ago
- Views:
Transcription
1 DOE-HDBK-1013/1-92 JUNE 1992 DOE FUNDAMENTALS HANDBOOK INSTRUMENTATION AND CONTROL Volume 1 of 2 U.S. Department of Energy Washington, D.C FSC-6910 Distribution Statement A. Approved for public release; distribution is unlimited.
2 This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information. P. O. Box 62, Oak Ridge, TN 37831; (615) Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., Springfield, VA Order No. DE
3 INSTRUMENTATION AND CONTROL ABSTRACT The Instrumentation and Control Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of instrumentation and control systems. The handbook includes information on temperature, pressure, flow, and level detection systems; position indication systems; process control systems; and radiation detection principles. This information will provide personnel with an understanding of the basic operation of various types of DOE nuclear facility instrumentation and control systems. Key Words: Training Material, Temperature Detection, Pressure Detection, Level Detection, Flow Detection, Position Indication, Radiation Detection, Process Control Rev. 0 IC
4
5 INSTRUMENTATION AND CONTROL FOREWORD The Department of Energy (DOE) Fundamentals Handbooks consist of ten academic subjects, which include Mathematics; Classical Physics; Thermodynamics, Heat Transfer, and Fluid Flow; Instrumentation and Control; Electrical Science; Material Science; Mechanical Science; Chemistry; Engineering Symbology, Prints, and Drawings; and Nuclear Physics and Reactor Theory. The handbooks are provided as an aid to DOE nuclear facility contractors. These handbooks were first published as Reactor Operator Fundamentals Manuals in 1985 for use by DOE Category A reactors. The subject areas, subject matter content, and level of detail of the Reactor Operator Fundamentals Manuals was determined from several sources. DOE Category A reactor training managers determined which materials should be included, and served as a primary reference in the initial development phase. Training guidelines from the commercial nuclear power industry, results of job and task analyses, and independent input from contractors and operations-oriented personnel were all considered and included to some degree in developing the text material and learning objectives. The DOE Fundamentals Handbooks represent the needs of various DOE nuclear facilities' fundamentals training requirements. To increase their applicability to nonreactor nuclear facilities, the Reactor Operator Fundamentals Manual learning objectives were distributed to the Nuclear Facility Training Coordination Program Steering Committee for review and comment. To update their reactor-specific content, DOE Category A reactor training managers also reviewed and commented on the content. On the basis of feedback from these sources, information that applied to two or more DOE nuclear facilities was considered generic and was included. The final draft of each of these handbooks was then reviewed by these two groups. This approach has resulted in revised modular handbooks that contain sufficient detail such that each facility may adjust the content to fit their specific needs. Each handbook contains an abstract, a foreword, an overview, learning objectives, and text material, and is divided into modules so that content and order may be modified by individual DOE contractors to suit their specific training needs. Each subject area is supported by a separate examination bank with an answer key. The DOE Fundamentals Handbooks have been prepared for the Assistant Secretary for Nuclear Energy, Office of Nuclear Safety Policy and Standards, by the DOE Training Coordination Program. This program is managed by EG&G Idaho, Inc. Rev. 0 IC
6
7 INSTRUMENTATION AND CONTROL OVERVIEW The Department of Energy Fundamentals Handbook entitled Instrumentation and Control was prepared as an information resource for personnel who are responsible for the operation of the Department's nuclear facilities. A basic understanding of instrumentation and control is necessary for DOE nuclear facility operators, maintenance personnel, and the technical staff to safely operate and maintain the facility and facility support systems. The information in the handbook is presented to provide a foundation for applying engineering concepts to the job. This knowledge will help personnel more fully understand the impact that their actions may have on the safe and reliable operation of facility components and systems. The Instrumentation and Control handbook consists of seven modules that are contained in two volumes. The following is a brief description of the information presented in each module of the handbook. Volume 1 of 2 Module 1 - Temperature Detectors This module describes the construction, operation, and failure modes for various types of temperature detectors and indication circuits. Module 2 - Pressure Detectors This module describes the construction, operation, and failure modes for various types of pressure detectors and indication circuits. Module 3 - Level Detectors This module describes the construction, operation, and failure modes for various types of level detectors and indication circuits. Module 4 - Flow Detectors This module describes the construction, operation, and failure modes for various types of flow detectors and indication circuits. Module 5 - Position Indicators This module describes the construction, operation, and failure modes for various types of position indicators and control circuits. Rev. 0 IC
8
9 INSTRUMENTATION AND CONTROL Volume 2 of 2 Module 6 - Radiation Detectors This module describes the principles of radiation detection, detector operation, circuit operation, and specific radiation detector applications. Module 7 - Principles of Control Systems This module describes the principles of operation for control systems used in evaluating and regulating changing conditions in a process. The information contained in this handbook is by no means all encompassing. An attempt to present the entire subject of instrumentation and control would be impractical. However, the Instrumentation and Control handbook does present enough information to provide the reader with a fundamental knowledge level sufficient to understand the advanced theoretical concepts presented in other subject areas, and to better understand basic system and equipment operations. Rev. 0 IC
10
11 Department of Energy Fundamentals Handbook INSTRUMENTATION AND CONTROL Module 1 Temperature Detectors
12
13 Temperature Detectors TABLE OF CONTENTS TABLE OF CONTENTS LIST OF FIGURES... ii LIST OF TABLES... iii REFERENCES... OBJECTIVES... iv v RESISTANCE TEMPERATURE DETECTORS (RTDs)... 1 Temperature... 1 RTD Construction... 2 Summary... 4 THERMOCOUPLES... 5 Thermocouple Construction... 5 Thermocouple Operation... 6 Summary... 7 FUNCTIONAL USES OF TEMPERATURE DETECTORS... 8 Functions of Temperature Detectors... 8 Detector Problems... 8 Environmental Concerns... 9 Summary... 9 TEMPERATURE DETECTION CIRCUITRY Bridge Circuit Construction Bridge Circuit Operation Temperature Detection Circuit Temperature Compensation Summary Rev. 0 Page i IC-01
14 LIST OF FIGURES Temperature Detectors LIST OF FIGURES Figure 1 Electrical Resistance-Temperature Curves... 2 Figure 2 Internal Construction of a Typical RTD... 3 Figure 3 RTD Protective Well and Terminal Head... 4 Figure 4 Thermocouple Material Characteristics When Used with Platinum... 5 Figure 5 Internal Construction of a Typical Thermocouple... 6 Figure 6 Simple Thermocouple Circuit... 6 Figure 7 Temperature-vs-Voltage Reference Table... 7 Figure 8 Bridge Circuit Figure 9 Unbalanced Bridge Circuit Figure 10 Balanced Bridge Circuit Figure 11 Figure 12 Block Diagram of a Typical Temperature Detection Circuit Resistance Thermometer Circuit with Precision Resistor in Place of Resistance Bulb IC-01 Page ii Rev. 0
15 Temperature Detectors LIST OF TABLES LIST OF TABLES NONE Rev. 0 Page iii IC-01
16 REFERENCES Temperature Detectors REFERENCES Kirk, Franklin W. and Rimboi, Nicholas R., Instrumentation, Third Edition, American Technical Publishers, ISBN Academic Program for Nuclear Power Plant Personnel, Volume IV, General Physics Corporation, Library of Congress Card #A , April Fozard, B., Instrumentation and Control of Nuclear Reactors, ILIFFE Books Ltd., London. Wightman, E.J., Instrumentation in Process Control, CRC Press, Cleveland, Ohio. Rhodes, T.J. and Carroll, G.C., Industrial Instruments for Measurement and Control, Second Edition, McGraw-Hill Book Company. Process Measurement Fundamentals, Volume I, General Physics Corporation, ISBN , IC-01 Page iv Rev. 0
MECHANICAL SCIENCE Module 2 Heat Exchangers
Department of Energy Fundamentals Handbook MECHANICAL SCIENCE Module 2 Heat Exchangers Heat Exchangers DOE-HDBK-1018/1-93 TABLE OF CONTENTS TABLE OF CONTENTS LIST OF FIGURES... ii LIST OF TABLES... iii
More informationPDHonline Course M140 (3 PDH) Pumps. Instructor: Lawrence J. Marchetti, P.E. PDH Online PDH Center
PDHonline Course M140 (3 PDH) Pumps Instructor: Lawrence J. Marchetti, P.E. 2012 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658 Phone & Fax: 703-988-0088 www.pdhonline.org www.pdhcenter.com
More informationTesting coated fabrics
BRITISH STANDARD BS 3424-12: 1996 ISO 1419:1995 Incorporating Amendments Nos. 1 and 2 Testing coated fabrics Part 12: Accelerated ageing tests ICS 59.080.40 Committees responsible for this British Standard
More informationMANUAL ON THE USE OF THERMOCOUPLES IN TEMPERATURE MEASUREMENT
MANUAL ON THE USE OF THERMOCOUPLES IN TEMPERATURE MEASUREMENT Sponsored by ASTM Committee E-20 on Temperature Measurement and Subcommittee IV on Thermocouples AMERICAN SOCIETY FOR TESTING AND MATERIALS
More informationMANUAL ON THE USE OF THERMOCOUPLES IN TEMPERATURE MEASUREMENT
MANUAL ON THE USE OF THERMOCOUPLES IN TEMPERATURE MEASUREMENT Sponsored by ASTM Committee E-20 on Temperature Measurement and Subcommittee IV on Thermocouples AMERICAN SOCIETY FOR TESTING AND MATERIALS
More informationAn American National Standard
An American National Standard Published by the 555 N. Kensington Ave La Grange Park, IL 60526 ANSI/ANS-15.11-2016 American National Standard Radiation Protection at Research Reactor Facilities Secretariat
More informationMECHANICAL SCIENCE Module 2 Heat Exchangers
Department of Energy Fundamentals Handbook MECHANICAL SCIENCE Module 2 Heat Exchangers Heat Exchangers DOE-HDBK-1018/1-93 TABLE OF CONTENTS TABLE OF CONTENTS LIST OF FIGURES... ii LIST OF TABLES... iii
More informationAS/NZS :2008
AS/NZS 60079.29.2:2008 Australian/New Zealand Standard Explosive atmospheres Part 29.2: Gas detectors Selection, installation, use and maintenance of detectors for flammable gases and oxygen AS/NZS 60079.29.2:2008
More informationChapter 1. Introduction
1.1 Background of the Proposed Research The measurement of temperature has been playing a critical role in various technical areas from civilian to military applications. According to all recent major
More informationThe Power of Electricity
The Power of Electricity Textbook pages 320 329 Section 9.2 Summary Before You Read What does the word power mean to you? Write a sentence using this word on the lines below. As you read about the power
More informationAustralian/New Zealand Standard
AS/NZS 3760:2003 (Incorporating Amendment No. 1) AS/NZS 3760:2003 Australian/New Zealand Standard In-service safety inspection and testing of electrical equipment AS/NZS 3760:2003 This Joint Australian/New
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 3008-2 Second edition 2017-05 Fire-resistance tests Part 2: Lift landing door assemblies Essais de résistance au feu Partie 2: Assemblage de porte palière d ascenseur Reference
More informationIntroduction to Industrial Mechanical Components Course# ME810
Introduction to Industrial Mechanical Components Course# ME810 EZ-pdh.com Ezekiel Enterprises, LLC 301 Mission Dr. Unit 571 New Smyrna Beach, FL 32128 386-882-EZCE(3923) helpdesk@ezpdh.com Ezekiel Enterprises,
More informationOperations Manual DS 220. Docking Station for Micro IV
DS 220 Docking Station for Micro IV Operations Manual 1194 Oak Valley Dr, Ste 20, Ann Arbor MI 48108 USA (800) 959-0329 (734) 769-0573 www.goodforgas.com Table of Contents Introduction... 2 For Your Safety...
More informationAddressable Fire Alarm System Fire Alarm Training System
Industrial Maintenance Addressable Fire Alarm System Fire Alarm Training System Job Sheets - Courseware Sample 85153-F0 Order no.: 85153-30 First Edition Revision level: 06/2015 By the staff of Festo Didactic
More informationSubstations and high voltage installations exceeding 1 kv a.c.
AS 2067:2016 AS 2067:2016 Substations and high voltage installations exceeding 1 kv a.c. This Australian Standard was prepared by Committee EL-043, High Voltage Installations. It was approved on behalf
More informationAustralian/New Zealand Standard
AS/NZS 61779.6:2000 (Incorporating Amendment No. 1) AS/NZS 61779.6:2000 Australian/New Zealand Standard Electrical apparatus for the detection and measurement of flammable gases Part 6: Guide for the selection,
More informationENVIRONMENTAL DESIGN EVALUATION
ENVIRONMENTAL DESIGN EVALUATION Arnold Friedmann University of Massachusetts, Amherst Craig Zimring Georgia Institute of Technology, Atlanta Ervin Zube University of Arizona, Tucson This concise, highly
More informationISO INTERNATIONAL STANDARD. Fire-resistance tests Elements of building construction Part 1: General requirements
INTERNATIONAL STANDARD ISO 834-1 First edition 1999-09-15 Fire-resistance tests Elements of building construction Part 1: General requirements Essai de résistance au feu Éléments de construction Partie
More informationAustralian Standard. Fire detection, warning, control and intercom systems Control and indicating equipment. Part 1: Fire
AS 4428.1 1998 (Incorporating Amendment No. 1) AS 4428.1 Australian Standard Fire detection, warning, control and intercom systems Control and Part 1: Fire This Australian Standard was prepared by Committee
More informationSecond Revision No. 3-NFPA [ Section No. 2.3 ]
Second Revision No. 3-NFPA 804-2014 [ Section No. 2.3 ] 2.3 Other Publications. 2.3.1 ASME Publications. American Society of Mechanical Engineers, Three Park Avenue, New York, NY 10016-5990. ASME Boiler
More informationAustralian/New Zealand Standard
AS/NZS 4645.2:2008 AS/NZS 4645.2:2008 Australian/New Zealand Standard Gas distribution networks Part 2: Steel pipe systems AS/NZS 4645.2:2008 This Joint Australian/New Zealand Standard was prepared by
More information( )
Course Title: Fire Dynamics (3087) Course Number: FST - 3087 Course Credit Hours: (3) Three Semester Hours Instructor Information: Bernard W. Becker, III, MS (937-751-7371) ccfdchiefbecker@yahoo.com Textbook:
More informationDIMENSIONAL STANDARD FOR 1/4" QUICK CONNECT COUPLER PLUGS AND SOCKETS FOR PORTABLE PRESSURE WASHERS
PWMA PW201-2014 PWMA Standard DIMENSIONAL STANDARD FOR 1/4" QUICK CONNECT COUPLER PLUGS AND SOCKETS FOR PORTABLE PRESSURE WASHERS Pressure Washer Manufacturers Association Sponsor: 1300 Sumner Avenue Cleveland,
More informationDIMENSIONAL STANDARD FOR M22 THREAD CONNECT COUPLER RECEPTACLES AND PLUG COLLARS FOR PORTABLE PRESSURE WASHERS
PWMA PW203-2014 PWMA Standard DIMENSIONAL STANDARD FOR M22 THREAD CONNECT COUPLER RECEPTACLES AND PLUG COLLARS FOR PORTABLE PRESSURE WASHERS Pressure Washer Manufacturers Association Sponsor: 1300 Sumner
More informationAS/NZS :2009
Australian/New Zealand Standard AS/NZS 61558.2.6:2009 Incorporating Amendment No. 1 (IEC 61558-2-6 Ed 2, MOD) Safety of transformers, reactors, power supply units and similar products for supply voltages
More informationInstrumentation Products and Applications
1 1/0 Instrumentation Products and Applications 1 Instrumentation Safety barriers I.S. Isolators - DIN rail mounting - Eurocards - Modules Remote I/O Operating and monitoring systems Instrumentation systems
More informationAS/NZS 4234:2008 AS/NZS
AS/NZS 4234:2008 Incorporating Amendment No. 1, 2, and 3 Australian/New Zealand Standard Heated water systems Calculation of energy consumption Superseding AS/NZS 4234:2008 AS/NZS 4234:2008 AS/NZS 4234:2008
More informationAS/NZS IEC :2013
AS/NZS IEC 61347.2.13:2013 (IEC 61347-2-13, Ed.1.0 2006, MOD) Australian/New Zealand Standard Lamp controlgear Part 2.13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED
More informationAustralian/New Zealand Standard
AS/NZS 2243.5 Australian/New Zealand Standard Safety in laboratories Part 5: Non-ionizing radiations Electromagnetic, sound and ultrasound This Joint Australian/New Zealand Standard was prepared by Joint
More informationOptical Fibres ELEC8350
PHOTONICS AND OPTOELECTRONICS PROGRAM Optical Fibres ELEC8350 Lecturer in Charge: Prof Gang-Ding Peng Any enquiry: 61-2-93854014 & G.Peng@unsw.edu.au U N I V E R S I T Y O F N E W S O U T H W A L E S SCHOOL
More informationStandard Refrigeration And Air Conditioning Questions And Answers Pdf
Standard Refrigeration And Air Conditioning Questions And Answers Pdf Standard text messaging rates apply Top 10 refrigeration interview questions with answers In this file, you can ref interview materials
More informationNUCLEAR REGULATORY COMMISSION. [Docket No ; NRC ] Exemption Requests for Special Nuclear Material License SNM-362,
This document is scheduled to be published in the Federal Register on 04/13/2012 and available online at http://federalregister.gov/a/2012-08917, and on FDsys.gov [7590-01-P] NUCLEAR REGULATORY COMMISSION
More informationRoad vehicles Mopeds Symbols for controls, indicators and tell-tales
BSI Standards Publication Road vehicles Mopeds Symbols for controls, indicators and tell-tales NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide BRITISH
More informationAS/NZS :2014
(ISO 13857:2008, IDT) Australian/New Zealand Standard Safety of machinery Part 1801: Safety distances to prevent danger zones being reached by upper and lower limbs AS/NZS 4024.1801:2014 This joint Australian/New
More informationIPC CODE AND COMMENTARY
2012 IPC CODE AND COMMENTARY 2012 International Plumbing Code Commentary First Printing: March 2012 ISBN: 978-1-60983-070-0 (soft-cover) COPYRIGHT 2012 by INTERNATIONAL CODE COUNCIL, INC. ALL RIGHTS RESERVED.
More informationTEXAS CHAPTER AMERICAN SOCIETY OF LANDSCAPE ARCHITECTS 2019 PROFESSIONAL AWARDS GUIDELINES
TEXAS CHAPTER AMERICAN SOCIETY OF LANDSCAPE ARCHITECTS 2019 PROFESSIONAL AWARDS GUIDELINES The Texas Chapter of the American Society of Landscape Architects invites, from the Chapter membership, submission
More informationAustralian Standard. Functional safety Safety instrumented systems for the process industry sector
AS IEC 61511.2 2004 IEC 61511-2:2003 AS IEC 61511.2 Australian Standard Functional safety Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of AS IEC 61511.1
More informationAustralian/New Zealand Standard
AS/NZS 3004:2002 AS/NZS 3004 Australian/New Zealand Standard Electrical installations Marinas and pleasure craft at low-voltage AS/NZS 3004:2002 This Joint Australian/New Zealand Standard was prepared
More informationBASIC PLUMBING SERVICES SKILLS 2ND EDITION ANSWERS
page 1 / 6 page 2 / 6 basic plumbing services skills pdf www.abctlc.com www.abctlc.com Basic Plumbing Services Skills Answers Preparing the books to read every day is enjoyable for many people. However,
More informationFundamentals is subdivided into Sources of Radiation, Biological Effects, Mathematics, Chemistry, Physics, and Units and Terminology.
NRRPT Exam Review Class - an intensive 5-day class designed to prepare the candidate to successfully pass the NRRPT Exam. The course concentrates on the basic tools the candidate needs to successfully
More informationManual Of Soil Laboratory Testing, Third Edition READ ONLINE
Manual Of Soil Laboratory Testing, Third Edition READ ONLINE If you are searching for the ebook Manual of Soil Laboratory Testing, Third Edition in pdf form, then you have come on to right site. We furnish
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60079-29-2 Edition 2.0 2015-03 Explosive atmospheres Part 29-2: Gas detectors Selection, installation, use and maintenance of detectors for flammable gases and oxygen INTERNATIONAL
More informationGagnon, R. M. (2008). Design of special hazard and fire alarm systems (2nd ed.). Albany, NY: Delmar Learning.
MOS 5301, Fire Protection Technology Course Syllabus Course Description Introduction to the design, specification, approving, testing, maintaining, and installing of fire protection systems. Examines a
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60462 Edition 2.0 2010-07 Nuclear instrumentation Photomultiplier tubes for scintillation counting Test procedures INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE T ICS
More informationAustralian Standard. Degrees of protection provided by enclosures (IP Code) AS IEC Ed 2.1:2001 AS 60529
AS 60529 2004 IEC 60529 Ed 2.1:2001 AS 60529 Australian Standard Degrees of protection provided by enclosures (IP Code) This Australian Standard was prepared by Committee EL-026, Protective Enclosures
More informationAustralian Standard. Fire detection, warning, control and intercom systems System design, installation and commissioning. Part 1: Fire AS 1670.
AS 1670.1 2004 (Incorporating Amendment No. 1) AS 1670.1 2004 Australian Standard Fire detection, warning, control and intercom systems System design, installation and commissioning Part 1: Fire This Australian
More informationPrinciples of Mechanical Refrigeration
REFRIGERATION CYCLE Principles of Mechanical Refrigeration Level 1: Introduction Technical Development Programs (TDP) are modules of technical training on HVAC theory, system design, equipment selection
More informationAS/NZS :2015
AS/NZS 60598.2.10:2015 (IEC 60598.2.10, Ed.2.0:2003, MOD) Australian/New Zealand Standard Luminaires Part 2.10: Particular requirements Portable luminaires for children Superseding AS/NZS 60598.2.10:1998
More informationFIRE PROTECTION ISSUES IN THE HOT CELLS OF A NUCLEAR FACILITY
FIRE PROTECTION ISSUES IN THE HOT CELLS OF A NUCLEAR FACILITY Ovidiu ICHIM Institute for Nuclear Research Pitesti - ROMANIA GENERAL OVERVIEW Romania's nuclear energy program foresees for the safe and competitive
More informationPart G-5: Contents of Courses and Books
1 Contents of National and International Courses and Books A. Contents of National and International Courses University or web site Course title Course number Lecturers Content Auburn university Heat transfer
More informationAS/NZS IEC :2016
AS/NZS IEC 60601.2.2:2016 (IEC 60601-2-2, Ed.5.0 (2009) IEC 60601-2-2:2009/COR1:2014, IDT) Australian/New Zealand Standard Medical electrical equipment Part 2.2: Particular requirements for the basic safety
More informationComparison of IEEE 323 and IEC Shows Notable Consistency (cont)
International Electrotechnical Commission (IEC) 60780 Nuclear power plants Electrical equipment of the safety system Qualification Richard T. Wood Oak Ridge National Laboratory presented at IEEE Subcommittee
More informationAustralian Standard. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 0: Functional safety and AS 61508
AS 61508.0 2006 IEC/TR 61508-0:2005 AS 61508.0 2006 Australian Standard Functional safety of Part 0: Functional safety and AS 61508 This Australian Standard was prepared by Committee IT-006, Industrial
More informationAustralian/New Zealand Standard
AS/NZS 3200.2.4:2006 IEC 60601-2-4:2005 AS/NZS 3200.2.4:2006 Australian/New Zealand Standard Medical electrical equipment Part 2.4: Particular requirements for safety Cardiac defibrillators AS/NZS 3200.2.4:2006
More informationFin-Fan Control System
IJSRD - International Journal for Scientific Research & Development Vol. 2, Issue 02, 2014 ISSN (online): 2321-0613 Fin-Fan Control System Pankaj Shah 1 Jignesh Vaghela 2 1, 2 Student 1, 2 Instrumentation
More informationAS/NZS :2014. Electrical equipment for coal mines Introduction, inspection and maintenance AS/NZS :2014. Part 1: For hazardous areas
AS/NZS 2290.1:2014 Australian/New Zealand Standard Electrical equipment for coal mines Introduction, inspection and maintenance Part 1: For hazardous areas Superseding AS/NZS 2290.1:2005 AS/NZS 2290.1:2014
More informationHOW TO ORGANIZE AN OPERATION AND MAINTENANCE PROGRAM TABLE OF CONTENTS MODULE INTRODUCTION.,... UNIT I. OVER VIEW
HOW TO ORGANIZE AN OPERATION AND MAINTENANCE PROGRAM TABLE OF CONTENTS MODULE INTRODUCTION.,...................................... UNIT I. OVER VIEW WHAT IS AN O&M PROGRAM? Introduction What Is Operation?
More informationAS/NZS :1995. Emergency escape lighting and exit signs for buildings AS/NZS :1995. Part 2: Inspection and maintenance
Australia/New Zealand Standard AS/NZS 2293.2:1995 Incorporating Amendment No. 1, 2, and 3 Emergency escape lighting and exit signs for buildings Superseding in part NZS 6742:1971 and AS 2293.2 1987 AS/NZS
More informationAustralian/New Zealand Standard
AS/NZS 2293.2:1995 (Incorporating Amendment Nos 1 and 2) AS/NZS 2293.2:1995 Australian/New Zealand Standard Emergency escape lighting and exit signs for buildings AS/NZS 2293.2:1995 This Joint Australian/New
More informationSIZING HANDBOOK & APPLICATION GUIDE
SIZING HANDBOOK SIZING HANDBOOK & APPLICATION GUIDE Chimney & Gas Vent For Capacities to 100 Million B.T.U. The primary aim of this Sizing Handbook is to provide more detailed guidance on appliance venting
More informationAustralian Standard. Electroacoustics Sound calibrators AS IEC This is a free 7 page sample. Access the full version online.
AS IEC 60942 2004 IEC 60942:2003 AS IEC 60942 Australian Standard Electroacoustics Sound calibrators This Australian Standard was prepared by Committee AV-002, Acoustics Instrumentation and Measurement
More informationHexagon nuts Ð Product grade C
BRITISH STANDARD BS EN ISO 4034:2001 The European Standard EN ISO 4034:2000 has the status of a British Standard ICS 21.060.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Hexagon
More informationAS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016. Part 3: Installation site
Australian/New Zealand Standard (ISO 5149-3:2014, MOD) Refrigerating systems and heat pumps Safety and environmental requirements Part 3: Installation site Superseding in part AS/NZS 1677.2:1998 This joint
More informationOHIO UNIVERSITY RADIATION SAFETY REVIEW
Appendix 29 OHIO UNIVERSITY RADIATION SAFETY REVIEW (Refer to Annual Radiation Safety Report Summary for comments on circled items.) I. LICENSE CONDITIONS 1. Expiration date of license: 2. Were license
More informationHUMAN AND ENERGY FACTORS IN URBAN PLANNING: A SYSTEMS APPROACH
HUMAN AND ENERGY FACTORS IN URBAN PLANNING: A SYSTEMS APPROACH NATO ADVANCED STUDY INSTITUTES SERIES Proceedings of the Advanced Study Institute Programme, which aims at the dissemination of advanced knowledge
More informationISO INTERNATIONAL STANDARD. Coating powders Part 13: Particle size analysis by laser diffraction
INTERNATIONAL STANDARD ISO 8130-13 First edition 2001-09-01 Coating powders Part 13: Particle size analysis by laser diffraction Poudres pour revêtement Partie 13: Analyse granulométrique par diffraction
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61300-3-53 Edition 1.0 2015-02 colour inside Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-53: Examinations and measurements
More informationElectrical Hazards and NFPA-70E: Protecting Your Employees
Electrical Hazards and NFPA-70E: Protecting Your Employees Presented By Mark B. Haskins, MS, CSP Practical Safety Solutions, LLC At the CBIA Safety Health and Wellness Conference May 22, 2014 PRESENTATION
More informationISO 3999 INTERNATIONAL STANDARD. Radiation protection Apparatus for industrial gamma radiography Specifications for performance, design and tests
INTERNATIONAL STANDARD ISO 3999 Second edition 2004-12-15 Radiation protection Apparatus for industrial gamma radiography Specifications for performance, design and tests Radioprotection Appareils pour
More informationAustralian Standard. Emergency escape lighting and exit signs for buildings. Part 1: System design, installation and operation AS 2293.
AS 2293.1 2005 AS 2293.1 2005 Australian Standard Emergency escape lighting and exit signs for buildings Part 1: System design, installation and operation This Australian Standard was prepared by Committee
More informationAS/NZS :2011. Household and similar electrical appliances Safety AS/NZS :2011. Part 1: General requirements
AS/NZS 60335.1:2011 (IEC 60335-1, Ed 5.2:2016, MOD) Incorporating Amendment No. 1, 2, 3 and 4 Australian/New Zealand Standard Household and similar electrical appliances Safety Part 1: General requirements
More informationAmerican National Standard
American National Standard Approved : 06/19/2014 Secretariat: National Electrical Manufacturers Association for Electric Lamps Assigned LED Lamp Codes ANSI C78.50-2014 An American National Standard implies
More informationThis is a preview - click here to buy the full publication TECHNICAL REPORT. Nuclear medicine instrumentation Routine tests
TECHNICAL REPORT IEC TR 61948-1 First edition 2001-02 Nuclear medicine instrumentation Routine tests Part 1: Radiation counting systems Instrumentation en médecine nucléaire Essais de routine Partie 1:
More informationAustralian/New Zealand Standard
AS/NZS 1338.1:2012 AS/NZS 1338.1:2012 Australian/New Zealand Standard Filters for eye protectors Part 1: Filters for protection against radiation generated in welding and allied operations AS/NZS 1338.1:2012
More informationDRAFT SAINT LUCIA NATIONAL STANDARD DNS/IEC : 2010
DRAFT SAINT LUCIA NATIONAL STANDARD DNS/IEC 60335-1: 2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY PART 1: GENERAL REQUIREMENTS (IEC 60335-1: 2010, IDT) Edition 5.0 (Stage 40 Enquiry Stage) July
More informationFire detection and alarm systems. Part 4: Power supply equipment (ISO :2003, MOD) AS (Incorporating Amendment No.
AS 7240.4 2004 (Incorporating Amendment No. 1) AS 7240.4 2004 Fire detection and alarm systems Part 4: Power supply equipment (ISO 7240-4:2003, MOD) This Australian Standard was prepared by Committee FP-002,
More informationFire Engineering
Coordinating unit: 240 - ETSEIB - Barcelona School of Industrial Engineering Teaching unit: 713 - EQ - Department of Chemical Engineering Academic year: Degree: 2018 BACHELOR'S DEGREE IN MATERIALS ENGINEERING
More informationISO INTERNATIONAL STANDARD. Safety identification Escape and evacuation plan signs. Identification de sécurité Plans d'évacuation et de secours
INTERNATIONAL STANDARD ISO 23601 First edition 2009-02-15 Safety identification Escape and evacuation plan signs Identification de sécurité Plans d'évacuation et de secours Reference number ISO 23601:2009(E)
More informationProgram of Instruction Course Syllabus
Program of Instruction Course Syllabus Course Title: Program: Course Duration: Course Prerequisites: Fire Prevention Principles Fire Officer 40 Hours OSFM Firefighter II or Basic Firefighter Certification
More informationSARVEPALLI RADHAKRISHANAN UNIVERSITY, BHOPAL TIME TABLE EXAMINATION JUNE-2018
B.E. II SEMESTER (ALL BRANCH) ( Regular & Ex) Time: - 11:00 AM to 02:00 PM 19/06/2018 20/06/2018 21/06/2018 22/06/2018 23/06/2018 Saturday MA111 Mathematics-II CY110 Chemistry EE110 Basic Electrical &
More informationFundamentals of HVAC/R 2010
A Correlation and Narrative Brief of Fundamentals of HVAC/R 2010 To the Tennessee Learning Expectations for TEXTBOOK NARRATIVE FOR THE STATE OF TENNESSEE Fundamentals of HVAC/R Student Edition (ISBN: 9780132223676)
More informationFact Sheet No.4. CompEx Modules EX01R to EX04R for Gas and Vapour Environments
Fact Sheet No.4 CompEx Modules EX01R to EX04R for Gas and Vapour Environments Module Breakdown EX01R: EX02R: EX03R: EX04R: The preparation & installation of Ex d, n, e and p equipment in potentially explosive
More informationInternational Code Council
Page 1 of 7 International Code Council ICC 300-2012 edition Committee Actions Report for Committee Actions taken at the March 9th, 2011 meeting The ICC Standard Development Committee for Bleacher Safety
More informationProfessional Seminar. The Electrically Safe Workplace. Understanding the NFPA 70E Electrical Safety Standard, 2012 Edition ...
Professional Seminar The Electrically Safe Workplace Understanding the NFPA 70E Electrical Safety Standard, 2012 Edition Includes Complete Copy of NFPA 70E, 2012 Edition! Learn the Key Concepts of NFPA
More informationMinnesota Rules, Chapter 4732 X-Ray Revision
Minnesota Rules, Chapter 4732 X-Ray Revision DRAFT INDUSTRIAL RADIOGRAPHY X-RAY SYSTEMS, 2.0 (03/09/2018) Summary of Changes MDH made a number of changes to the Industrial Radiography rule draft v1.0 based
More informationENSC 388: Engineering Thermodynamics and Heat Transfer
ENSC 388: Engineering Thermodynamics and Heat Transfer Experiment 3: Free and Forced Convection Objective Determination of heat transfer coefficient for free and forced convection for different geometries.
More informationVeriSafe Absence of Voltage Tester The safe way to verify the absence of voltage
VeriSafe Absence of Voltage Tester The safe way to verify the absence of voltage www.panduit.com/verisafe What is an Absence of Voltage Tester? Absence of Voltage Testers (AVTs) are permanently-mounted
More informationAS/NZS 4745:2012. Code of practice for handling combustible dusts AS/NZS 4745:2012. Australian/New Zealand Standard. Superseding AS/NZS 4745:2004
AS/NZS 4745:2012 (Incorporating Amendment No. 1) Australian/New Zealand Standard Code of practice for handling combustible dusts Superseding AS/NZS 4745:2004 AS/NZS 4745:2012 AS/NZS 4745:2012 This Joint
More informationFIR 3305, Fire Protection Structure and Systems Course Syllabus. Course Description. Course Textbook. Course Learning Objectives.
FIR 3305, Fire Protection Structure and Systems Course Syllabus Course Description Provides information relating to the features of design and operation of fire alarm systems, water-based fire suppression
More informationThis is a preview - click here to buy the full publication
TECHNICAL REPORT IEC TR 62778 Edition 2.0 2014-06 colour inside Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires INTERNATIONAL ELECTROTECHNICAL COMMISSION
More informationSECTION SECURITY TESTING AND COMMISSIONING
SECTION 280800 - SECURITY TESTING AND COMMISSIONING PART 1 - GENERAL 1.1 WORK INCLUDES A. General Description: This specification section covers the provision of preliminary testing, acceptance testing,
More informationEngineering Drawing Standards Manual
ENGINEERING DRAWING STANDARDS MANUAL PDF - Are you looking for engineering drawing standards manual Books? Now, you will be happy that at this time engineering drawing standards manual PDF is available
More informationSBS5311 HVACR II Experiment 2: Analysis of the Combined Rankine and Vapour Compression Cycle
Introduction SBS5311 HVACR II http://ibse.hk/sbs5311/ Experiment 2: Analysis of the Combined Rankine and Vapour Compression Cycle The Rankine cycle is an idealized thermodynamic cycle of a heat engine
More informationElectric radiator tests
Electric radiator tests Carried out for Haverland By P Stonard 16 July 2010 Electric radiator tests Carried out for: Haverland Avda San Martin De Valdeigiesias Km-2,200 Alcorcon MADRID 28925 Spain Contract:
More informationBRITISH STANDARD AEROSPACE SERIES BS EN 3506:2001 Hot rolled sheets and plates in heat resisting alloys Thickness 2,0 mm a 100mm Dimensions The European Standard EN 3506:2001 has the status of a British
More informationDRAFT TANZANIA STANDARD
EEDC 4 (5157) P3 IEC 62599-1: 2010 DRAFT TANZANIA STANDARD (Draft for comments only) Alarm systems Part 1: Environmental test methods TANZANIA BUREAU OF STANDARDS TBS 2017 First Edition 2017 0 National
More informationAustralian/New Zealand Standard
AS/NZS ISO 21987:2011 ISO 21987:2009 AS/NZS ISO 21987:2011 Australian/New Zealand Standard Ophthalmic optics Mounted spectacle AS/NZS ISO 21987:2011 This Joint Australian/New Zealand Standard was prepared
More informationAustralian/New Zealand Standard
AS/NZS 3019:2007 AS/NZS 3019:2007 Australian/New Zealand Standard Electrical installations Periodic verification AS/NZS 3019:2007 This Joint Australian/New Zealand Standard was prepared by Joint Technical
More informationTable of Contents PART I: The History and Current Status of the Industrial HMI PART II: Fundamentals of HMI Design and Best Practices
Table of Contents PART I: The History and Current Status of the Industrial HMI We begin with the origin and evolution of the industrial HMI. The positive and negative issues posed by the introduction of
More information