SYSCO CENTRAL PENNSYLVANIA, LLC. HARRISBURG, PENNSYLVANIA

Transcription

1 SYSCO CENTRAL PENNSYLVANIA, LLC. HARRISBURG, PENNSYLVANIA July, 2018 Infrared Inspection Report Sysco Central Pennsylvania, LLC Corey Road Harrisburg, Pennsylvania, Company Contact Christopher Brooks Project: CHARTER OAK DRIVE, LITTLE ROCK, AR PHONE: & FAX:

2 ORDER OF REPORT CONTENTS 1: Data To Facilitate Understanding & Utilizing Scan Report 2: Scan Results Overview & Action Taken Form 3: Identified Faulting Conditions, Information & Photographs 4: List Of Facility Equipment Identified By The Customer Representative & Notations Of Faulting Conditions Found DISCLAIMER This report and the recommendations contained in it are based upon conditions and practices observed and information made available to United Spectrographics personnel. This report does not purport to list all hazards or faulty conditions. It is not intended to indicate that other hazards or faulty conditions do not exist. Severity ratings in the report are based on the criteria shown in this report and are intended as guidelines only. No responsibility is assumed for the control of the facility s condition, maintenance practices or correction of conditions indicated herein. By issuing this report, neither United Spectrographics nor any of its employees makes any warranty, expressed or implied, concerning the contents of this report. Furthermore, neither United Spectrographics nor any of its employees shall be liable in any manner (other than liability that may be expressed in any policy of insurance that may be issued by United Spectrographics) for personal injury or property damage or loss of any kind arising from or connected with this inspection or failure to inspect.

3 July 27, 2018 Sysco Central Pennsylvania, LLC. Attn: Christopher Brooks 3905 Corey Road Harrisburg, Pennsylvania Dear Mr. Brooks; During the course of our July 2018 Infrared Inspection of your facility s electrical equipment, no equipment indicating a faulty thermal signature was located at the Customer Harrisburg, Pennsylvania facility. Locating no faults is an unusual occurrence for us; we generally encounter only a small percentage of facilities a year with no faults. Your maintenance people appear to be doing an outstanding job. We greatly appreciated the opportunity to complete this project for you and look forward to the next one. If you have any questions concerning this infrared inspection, please call Sincerely, S Richard P. Lincourt United Spectrographics, LLC CHARTER OAK DRIVE, LITTLE ROCK, AR PHONE: & FAX: Logistics@usscanman.com

4 Utilizing Report Contents Included in this report are Photographs and Thermographs of problem areas found during our recent Infrared Inspection of your facility. Each problem area picture is accompanied by: Date Location Information Temperature Calculations Color-coded Temperature Intensity and/or Condition Significance Data A Brief Comment Relating The Item In The Photograph To Its Corresponding Thermograph Suggested Corrective Recommendations. In most cases, problems (faults) found will be listed according to the date and order that they were located, rather then by significance or priority, as we feel that you and/or your personnel can best judge this, keeping in mind circuit importance and thermograph intensity. Thermal intensity is indicated by use of a color-coded data inserts that locate a fault s position on the standard electrical failure curve. The color of the insert represents the temperature range of the hottest item, or a portion of the item's circuitry, pointed out in the thermograph. The temperature ranges which the colored inserts represent are grouped as follows: INSERT Red Orange Yellow Green Temperature Range 70ºC/126ºF and higher above Ambient Operating Temp. 40ºC/72ºF to 69ºC/124ºF above Ambient Operating Temp. 25ºC/45ºF to 39ºC/70ºF above Ambient Operating Temp. *10ºC/18ºF to 24ºC/43ºF above Ambient Operating Temp. ( * See page 4)

5 Determining Cost Effective Responses Electrical equipment failures generally follow a standard mechanical/electrical failure curve. Dividing the failure curve into temp. ranges and locating a problems position on the curve allows us to indicate the probable time to its failure. Knowing a problems probable time to failure allows you to make a cost effective response to the problem areas that we locate. Below is a depiction of the electrical fault failure curve with the thermal intensity ranges and the colors that we assign to faults detailed in our reports. STANDARD ELECTRICAL FAULT FAILURE CURVE (Does Not Include Area In Blue) MINOR INTERMEDIATE SERIOUS CRITICAL DEVICE TEMP IS AMBIENT, BUT DEVICE IS EITHER FAULTY OR UNSAFE. 10ºC * 18ºF 25ºC 45ºF 40 C 72ºF 70 C 126ºF AMBIENT TEMP YEARS MONTHS MONTHS TO WEEKS WEEKS TO NOW FAULTY EQUIP Built In Trend Monitoring When yearly scans are accomplished, report results allow you to trend monitor your electrical equipment without having to cross reference previous report findings. If a previous years problem is not repaired it will show up again in the current scan report and its current intensity range indicates a current effective response.

6 Defining Total Temperature and Ambient Operating Temperature And Explanation For Their Use Total Temperature: Total Temperature = Ambient Operating Temperature + Fault temperature Allows you, the customer, to evaluate possible damage to equipment. Leads fail between 90ºC/194ºF and 110ºC/230º Phenolic fails around 200ºC/392ºF Transformers and Motor Insulation failure temperature depends on insulation class rating. Contacts start to fail around 130ºC/266ºF Ambient Operating Temperature (AOT*) for Infrared Scanning Purposes: Temperature within a device container (Box or Cabinet) that is not directly affected by faulting component = Normal Equipment Operating Temperature Contained By Box or Cabinet. If there is no container (Example: Device mounted to a wall) it is the temperature adjacent to the device not affected by the fault. Allows you, the customer, to determine if device will operate at intended amperage. Most switchgear is rated to operate at approximately 40ºC/104ºF (Industrial) to 50ºC/122ºF (Marine) If AOT is enough above normal rated temperature, either of the following conditions can cause an unanticipated trip. 1. An intermittent high load. 2. A minor (Green) or intermediate (Yellow) fault. Report pages with photographs: PH stands for Visible Light Photograph TH stands for Infrared Light Thermograph *AOT stands for Ambient Operating Temperature Both black & white and color infrared thermographs are presented to better depict the fault condition.

7 In addition to the corrective response time frame suggested below and the failure curve located on the previous page, you may want to consider using the military standard responses presented below. Military Standard For Evaluating Faults Located In Electrical Equipment Utilizing Temperature Data Obtained With Infrared Imaging Equipment: Temperatures rise above Ambient Operating Temperature: *10ºC/18ºF to 24ºC/43ºF component failure unlikely, but corrective measures required at next scheduled routine maintenance period or as scheduling permits. (Green Label) 25ºC/45ºF to 39ºC/70ºF component failure probable, unless corrected. (Yellow Label) 40ºC/72ºF to 69ºC/124ºF component failure almost certain, unless corrected. (Orange Label) 70ºC/126ºF and above component failure imminent. Immediately inform the person responsible for continued operation of equipment. (Red Label) Note: United Spectrographics uses a Blue Label to indicate faults that require attention due to either ambient temperature (Ex: Phase Not Operating), faulty equipment elements or unsafe conditions. * Note: Temperature conditions below 10ºC/18ºF rise above AOT are not considered significant enough to record and are usually not included in the reports unless the fault temperature is being affected by a cooling medium such as oil or wind. Fault Correction Recommendation When Our Source Assessment Is Inaccurate: When a fault is indicated in a connection or component and examination by your electrician does not turn up a loose connection or faulty component where we have indicated, a fault does exist. The electrician should continue to investigate the next connection or component to be found in the direction that the heat is coming from until a source is located. Example: If a molded case breaker line side lead connection lug is indicated as a fault source and is found to be secure, but not frozen in place, look for a loose connection or sign of over temp. in the lead holder lug.

8 SCAN RESULTS OVERVIEW PROMPT ATTENTION ITEMS: Because of: 1. The intensity or heat level indicated at the time of the scan. 2. Deterioration caused by excessive temperature not present at the time of the scan. 3. Physical condition irregularities observed at the time of the scan. We recommend that the following faults be given prompt attention: Faults: No Faults Found Items With Asterisks Have High Total or Ambient Operating Temperatures. United Spectrographics July, 2018

9 SUMMARY OF FINDINGS FAULTS BY CATEGORY NUMBER OF FAULTS FAULT NO./ITEM NO. MINOR 0 0 INTERMEDIATE 0 0 SERIOUS 0 0 CRITICAL 0 0 SERIOUS 0 0 Number of items located at facility: 143 Number of faults: 0

10 ACTION TAKEN Sysco Central Pennsylvania, LLC. Harrisburg, Pennsylvania July, 2018 None Required

11 AREA/EQUIPMENT LIST Following is a list of the electrical equipment located at the Sysco Central Pennsylvania, LLC., Harrisburg, PA, facility and data relating to its operating condition at the time the scan was performed. NOTE: Items noted as visually inspected were not operational or show no visible load at the time of the inspection. No. Equipment Operating Visually Inspected EQUIPMENT LIST COMPRESSOR ELECTRICAL ROOM GE Switchgear Section 1 Fault # 1 Panel HA X 2 New Ice Cream Room Evap X 3 Panel HDC X 4 BHI X GE Switchgear Section 2 5 Comp 1 X 6 Panel H8 X 7 Comp 3 X 8 Comp 4 X GE Switchgear Section 3 9 Panel H6 X 10 VFD Panel Refrig MCC X 11 Panel HDB X 12 Elevator X 13 Panel H7 X GE Switchgear Section 4 14 Spare 15 Comp 2 X 16 Panel HAD X 17 Comp 5 X GE Switchgear Section 5

12 No. Equipment Operating Visually Inspected 18 Panel HDB X Fault # 19 Buss Duct X GE Switchgear Section 6 20 Main Shutoff X GE Switchgear Section 7 21 Terminal Connections X 22 C1 Outside Lighting Contactor X 23 C2 Outside Lighting Contactor X 24 HDA 480/277 Volt Distribution Panel X 25 H-5 480/277 Volt Distribution Panel X 26 H-4 480/277 Volt Distribution Panel X 27 L-4 208/120 Volt Distribution Panel X 28 RMCC Panel (4 Doors) X COMPRESSOR ROOM 29 #1 Compressor Control Cabinet X 30 #2 Compressor Control Cabinet X 31 #3 Compressor Control Cabinet X 32 #4 Compressor Control Cabinet X 33 #5 Compressor Control Cabinet X 34 Refrigeration Control Panel X 35 Water Treatment Combination Starter X 36 FC02 Air Compressor Control Cabinet X 37 FC02 Air Compressor Disconnect X 38 Jockey Pump Controller X 39 Electric Fire Pump Controller X 40 Jockey Pump Disconnect X 41 High Temperature Fan Combination Starter X TANK ROOM

13 No. Equipment Operating Visually Inspected 42 H-7 480/277 Volt Distribution Panel X 43 L-7 208/120 Volt Distribution Panel X KVA GE 3ø Transformer X 45 C-4 Lighting Contactor X 46 C-5 Lighting Contactor X 47 C-6 Lighting Contactor X GENERATOR ROOM 48 PPL Electric Switchgear Section 1 Main 3000 Amp Switch X 49 PPL Electric Switchgear Section 2 Terminal Connections X 50 PPL Electric Switchgear Section 3 Terminal Connections (PPL Sealed) 51 Building Electric Switchgear Section 1 Main 3000 Amp Switch 52 Building Electric Switchgear Section 2 Automatic Transfer Switch 53 Building Electric Switchgear Section 3 Terminal Connections 54 Unlabeled 208/120 Volt Distribution Panel X WILL CALL 55 Unlabeled 60 Amp GE Fuse Disconnect X KVA GE 3ø Transformer (On Roof of Office) X 57 WC-1 208/120 Volt Distribution Panel X MAINTENANCE AREA X X X Didn t Scan 58 TPJ Panel 208/120 Volt Distribution Panel X KVA Square D 3ø Transformer X KVA Square D 1ø Transformer X 61 L /120 Volt Distribution Panel X ELECTRICAL CLOSET (Behind Break Room) 62 H-6 480/277 Volt Distribution Panel X 63 Unlabeled 400 Amp Molded Case Breaker X 64 L /120 Volt Distribution Panel X Fault #

14 No. Equipment Operating Visually Inspected 65 L-10A 208/110 Volt Distribution Panel X Fault # KVA GE 3ø Transformer X 67 HDB 480/277 Volt Distribution Panel X 68 Water Heater Control Cabient X 69 L-11 (Water Heater) Disconnect X DRY DOCK DOCK DOOR #14 70 Overhead 45 KVA GE 3ø Transformer X 71 H-9 Section 1 480/277 Volt Distribution Panel X 72 H-9 Section 2 480/277 Volt Distribution Panel X 73 L-9 208/120 Volt Distribution Panel X 74 C-A1A Lighting Contactor X 75 C-A2A Lighting Contactor X 76 C-A3A Lighting Contactor X 77 C-B1A Lighting Contactor X 78 C-B2A Lighting Contactor X NEAR STAIRWELL AREA 79 L-1A 208/120 Volt Distribution Panel X 80 L-1 208/120 Volt Distribution Panel X KVA GE 3ø Transformer X HUB AREA 82 H-1 480/277 Volt Distribution Panel X 83 HDAA 208/120 Volt Distribution Panel X 84 A-1 Lighting Contactor X 85 A-2 Lighting Contactor X 86 A-3 Lighting Contactor X 87 B-1 Lighting Contactor X 88 B-2 Lighting Contactor X

15 No. Equipment Operating Visually Inspected COOLER DOCK HUB AREA 89 H-2 480/277 Volt Distribution Panel X 90 L-2 208/120 Volt Distribution Panel X KVA GE 3ø Transformer X 92 L-2A 208/120 Volt Distribution Panel X 93 C-1 Lighting Contactor X 94 C-2 Lighting Contactor X 95 C-3 Lighting Contactor X 96 D-1 Lighting Contactor X 97 D-2 Lighting Contactor X 98 D-3 Lighting Contactor X 99 E-1 Lighting Contactor X 100 E-2 Lighting Contactor X ACROSS FROM DOCK DOOR #61 AREA 101 H-8 480/277 Volt Distribution Panel X 102 L-8 208/120 Volt Distribution Panel X 103 Overhead GE 3ø Transformer X 104 D-4 Lighting Contactor X 105 D-5 Lighting Contactor X 106 D-6 Lighting Contactor X 107 E-3 Lighting Contactor X 108 E-4 Lighting Contactor X 109 Unlabeled Contactor X OFFICE AREA ELEVATOR EQUIPMENT ROOM 110 Elevator Control Cabinet X 111 Elevator Fuse Disconnect X 112 Cab Lights Fuse Disconnect X Fault #

16 No. Equipment Operating Visually Inspected UPSTAIRS ELECTRICAL CLOSET Fault # 113 1L1 Section 1 208/120 Volt Distribution Panel X 114 1L1 Section 2 208/120 Volt Distribution Panel X kVA Transformer Fuse Disconnect X KVA GE 3ø Transformer X 117 L-3 208/120 Volt Distribution Panel X 118 H-3 480/277 Volt Distribution Panel X 119 HDC 480/277 Volt Distribution Panel X 120 (Left) 45 KVA GE 3ø Transformer X 121 (Right) 45 KVA GE 3ø Transformer X COMPUTER ROOM 122 UL1 208/120 Volt Distribution Panel X 123 UL2 208/120 Volt Distribution Panel X 124 UL3 208/120 Volt Distribution Panel X 125 UPS Control Cabinet X 126 UPS Feed Fuse Disconnect X JANITOR CLOSET 127 1L2 208/120 Volt Distribution Panel X UPSTAIRS SECURITY CLOSET 128 L-11 Section 1 208/120 Volt Distribution Panel X 129 L-11 Section 2 208/120 Volt Distribution Panel X 130 L-11 Section 3 208/120 Volt Distribution Panel X KVA GE 3ø Transformer X TEST KITCHEN 132 K-1 208/120 Volt Distribution Panel X 133 K-2 208/120 Volt Distribution Panel X TRUCK PARKING (Did not scan due to insects and company pesticides policies)

17 No. Equipment Operating Visually Inspected 134 BH1 480/277 Volt Distribution Panel X 135 BH2 208/120 Volt Distribution Panel X KVA GE 3ø Transformer (Near Space #103) Didn t Scan KVA GE 3ø Transformer (Near Space #105) Didn t Scan KVA GE 3ø Transformer (Near Space #199) Didn t Scan KVA GE 3ø Transformer (Near Space #303) Didn t Scan KVA GE 3ø Transformer (Near Space #318) Didn t Scan TRUCK SHED 141 Unlabeled 480/277 Volt Distribution Panel X 142 Unlabeled 208/120 Volt Distribution Panel X KVA GE 3ø Transformer X Fault #