XUBLAPCNL2 photo-electric sensor - XUB - thru beam - laser - Sn 100m VDC - cable 2m

Transcription

1 Characteristics photo-electric sensor - XUB - thru beam - laser - Sn 100m VDC - cable 2m Buy online Complementary Enclosure material Lens material Blind zone Output type Status LED [Us] rated supply voltage Supply voltage limits Switching capacity in ma Switching frequency Voltage drop Current consumption Power consumption in W Delay first up Delay response Delay recovery Setting-up Product weight Kit composition Main Range of product Series name Electronic sensor type Sensor name Sensor design Detection system Material Type of output signal Supply circuit type Wiring technique Discrete output type Discrete output function Electrical connection Cable length Emission [Sn] nominal sensing distance PBT PMMA 0 mm Solid state OsiSense XU Application material handling Photo-electric sensor XUB Cylindrical M18 Thru beam Plastic Discrete DC 3-wire PNP 1 NO or 1 NC programmable Cable 2 m Red laser (class 1), wavelength: 670 nm conforming to IEC m 1 LED (green) for supply on and teaching 1 LED (red) for stability 1 LED (yellow) for output state and alignment aid V DC with reverse polarity protection V DC <= 100 ma (overload and short-circuit protection) 1500 Hz <= 1.5 V (closed state) 25 ma (no-load) < 1 W < 80 ms < 0.4 ms < 0.4 ms With sensitivity adjustment 0.18 kg Transmitter + receiver XUBLAKCNL2T + R The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Jun 15,

2 Environment Product certifications CE CSA UL Ambient air temperature for operation C Ambient air temperature for storage C Vibration resistance 7 gn, amplitude = +/ mm (f = Hz) conforming to IEC Shock resistance 30 gn (duration = 11 ms) conforming to IEC IP degree of protection IP67 (double insulation) conforming to IEC Offer Sustainability Sustainable offer status RoHS (date code: YYWW) Product environmental profile Product end of life instructions Not Green Premium product Compliant - since Schneider Electric declaration of conformity Schneider Electric declaration of conformity Available Product Environmental Available End Of Life Manual Contractual warranty Warranty period 18 months 2

3 Dimensions Drawings Dimensions Dimensions 3

4 Mounting and Clearance Mounting Adjustment (1) Adjust the focusing point of the laser beam by rotating the serrated sleeve (2) Located on the face of the sensor. Re-tighten fixing screws 4

5 Connections and Schema Wiring Schemes PNP Transmitter (+) Brown BN : (-) Blue BU : (Output) Black BK : Input Not connected: beam made, connected to (-): beam broken 2/VI : 5

6 Performance Curves Curves Detection Curve (Set to Infinity) Excess Gain Curve (X) (Y) Distance (m) Gain Standard Curve (X) (Y) Distance focusing point (m) Minimum size of the object to be detected (mm) 6

7 Detection Limit Curve (X) (Y) Distance focusing point (m) Minimum size of the object to be detected (mm) 7