CAPO LED INTRODUCTION APPLICATION PRODUCT SPECIFICATION. Introduction

Size: px

Start display at page:

Download "CAPO LED INTRODUCTION APPLICATION PRODUCT SPECIFICATION. Introduction"

Shon Wilkerson
5 years ago
Views:

$With anodised spun rear housing, translucent collar available in a range of colours and opal refractor the Capo LED provides a decorative and attractive installation that can also be tailored to suit$

2 INTRODUCTION Introduction Combining eﬃciency with form the Capo LED provides an architectural solution in suspended applications for both ambient and accent lighting. With anodised spun rear housing, translucent collar available in a range of colours and opal refractor the Capo LED provides a decorative and attractive installation that can also be tailored to suit any corporate theme. With two lumen options and both dimming and emergency functions the performance of the Capo can also be customised to your needs. In all options the control gear is housed within the same luminaire design with no need for remote packs or ceiling housings ensuring that the look and feel of the space is not compromised. The Capo LED is supplied with a highly eﬃcient chip on board source providing similar lumens to 70w HID sources whilst typically consuming half the energy and eliminating the need to replace lamps ensuring signiﬁcant operating cost reduction compared to HID alternatives. APPLICATION Canteen Commercial/Oﬃces Education Hotel/Leisure Retail T: E: sales@dextralighting.co.uk Page 1 of 9

$Stairwell SPECIFICATION CONSTRUCTION Anodised spun aluminium housing. Translucent collar in a range of colour options. Opal refractor.$

3 Stairwell SPECIFICATION CONSTRUCTION Anodised spun aluminium housing. Translucent collar in a range of colour options. Opal refractor. PERFORMANCE Available in 2992llm and 3847llm luminaire lumen options. Philips Lumileds LM80 veriﬁed: 90% LED lumen maintenance at 60,000 operating hours. CONTROL Available with Digital, DALI, Switch Dimming and Analogue Dimming control gear. EMERGENCY Available in three hour self test and standard emergency integral to the luminaire. INSTALLATION Supplied complete with three metre suspension cable. IMAGES Product Images T: E: sales@dextralighting.co.uk Page 2 of 9

4 Project Images T: E: Page 3 of 9

5 T: E: Page 4 of 9

6 TECHNICAL T: E: Page 5 of 9

7 WARRANTY All Dextra products are supplied with a 12 month warranty for any defect that may occur with the product during this time. Any defect will either be repaired on site free of charge or the defective product may be replaced on a chargeable basis and credit given against defective product returned. The course of action taken will be at our discretion and dependent on the nature of the defect. The control gear within our high frequency and LED luminaires is further underwritten by our suppliers for a period of up to 5 years in total from the time of purchase. This comprises labour and parts for the ﬁrst 3 years and free of charge components only for the ﬁnal 2 years. PROTEC LED FR 8W GU10 luminaires and all Emergency LED ranges such as LED 3, EXI, HBE, OAT, OEZ, AME, OEH and TWS * are exempt from the 5 year warranty and are supplied with 1 year warranty only. PROTEC LED COB luminaires are supplied with a three year warranty for replacement luminaires only. All warranties are subject to correct use of the product and will be invalidated by misuse, for example incorrect installation or unsuitable environmental conditions. It is the duty of the customer to ensure that all relevant tests have been carried out prior to requesting site visits or replacement products, for example replacement of lamps, commissioning of sensors and inspection of external wiring. In the event that no defect is found with the product our costs for attending site will be recharged to the customer and credit will not be issued against returned products. No consequential losses incurred resulting from any defect with our product will be reimbursed. Consumable commodities such as lamps, starters and batteries are excluded from these warranty terms. Batteries are supplied with a twelve month warranty only. 5 year warranty on LED product ranges is subject to a maximum of 4000 operating hours per year and only applies where failures exceed the component manufacturers expected failure rate and lumen depreciation. If you require any assistance with regards to our products please do not hesitate to contact our Customer Services department on *The LED4 Emergency LED range is supplied with a three year battery warranty and 5 year luminaire warranty. ORDER CODES Luminaire Codes Code Description Circuit Wattages Llm/w CAP L35 Capo LED, 2735llm, Translucent Grey Collar, Grey Housing, Colour w 111 CAP L45 Capo LED, 3533llm, Translucent Grey Collar, Grey Housing, Colour w 105 Supplied complete with 3m suspension kit. Other collar colours available on request (dependent on quantity). Dimming Options Code Description H High Frequency Dimming (Analogue 1-10v) S Switch Dimming T: E: sales@dextralighting.co.uk Page 6 of 9

8 D Digital Dimming (DSI) A Digital Addressable Lighting Interface (DALI) Dimming Options Code Description RLI Dextra Reacta-Link System Please click here for full details on our wireless controls. Emergency Code Description E3 3 Hour Maintained Emergency Pack (Integral) ST3 Self Test STR Emergency Reacta-Link Not available with 4500 lumen options. Miscellaneous Code Description WH White Housing Other collar colours available on request (dependent on quantity) C83 Colour Rendering Index 80, Colour Temperature 3000K

CAPO / CAPO XL Installation WARNING - THIS LUMINAIRE MUST BE EARTHED This luminaire has been tested and is manufactured to comply with BS EN 60598 :

CAUTION: there is a potential risk of electric shock from the LED boards when the product is operational with the cover removed.

230-240V / 50-60Hz IP20 IK00 1 2 CAPO 3 CAPO XL CAPO CAPO XL <remove cover screws for access> 4 (a) Secure to ceiling (b) This screw NOT supplied!

9 CAPO / CAPO XL Installation WARNING - THIS LUMINAIRE MUST BE EARTHED This luminaire has been tested and is manufactured to comply with BS EN : specification for general requirements and tests. It should be installed by a suitably qualified person in accordance with IEE. CAUTION: there is a potential risk of electric shock from the LED boards when the product is operational with the cover removed. NOTE: INSTALLATION AND OPERATION OF THE LUMINAIRE BEYOND ITS SCOPE OF SUPPLY WILL INVALIDATE THE WARRANTY V / 50-60Hz IP20 IK CAPO 3 CAPO XL CAPO CAPO XL <remove cover screws for access> 4 (a) Secure to ceiling (b) This screw NOT supplied! (c) CAPO XL suspend via eyebolt using Gripple wire <supplied> NOTE method of attachment to ceiling determined by installer! CAPO fit adjustable clutch suspend using wire kit <supplied> 5 6 Dimming + Emergency Dimming Only NonDimming CAPO shown note luminaire may be supplied pre-wired DIL /04/18

10 CAPO / CAPO XL Installation 7 8 Cable must be clamped! - CAPO 9 Cable must be clamped! CAPO XL 10 CAPO CAPO XL NOTE: For emergency variants it is necessary to isolate both switched and permanent live supplies to view the emergency source and verify operation DIL /04/18

GRADUATE LED RECESSED

GRADUATE LED RECESSED INTRODUCTION The Graduate Recessed is the latest addition to our Graduate range of luminaires. Oﬀering the direct/indirect gull-wing aesthetic common to many traditional ﬂuorescent luminaires, the Graduate