Consolidated list of coin-processing machines successfully tested or declared to conform

Transcription

1 Ref. Ares(2014) /12/2014 European Anti-Fraud Office Directorate D: Policy Unit D.5: Hercule, Pericles & EURO Protection Brussels, 17 December 2014 Consolidated list of coin-processing machines successfully tested or declared to conform Regulation 1210/2010 (art. 4) of 15 December 2010 concerning the authentication of euro coins and handling euro coins unfit for circulation stipulates that coin-processing machines used for authentication purposes shall have successfully passed a detection test carried out by the designated national authority or by the European Technical & Scientific Centre (ETSC). The attached list (chapter I) includes coin processing machines that have been successfully tested in the last 12 months. Inclusion in the list means that one machine of this type was tested successfully at a given time. This does not guarantee that other machines of the same type function in the same way, as this would depend on a number of criteria, notably the adjustment and the correct maintenance of the machine. The validity period for a successful test is twelve months. If a machine of a certain type has not successfully undergone a new test before the end of this period, the machine will be taken off the list. The acceptance criteria applied were those ones defined in the Commission guidelines on the implementation of the Regulation 1210/2010. Machine manufacturers were required to set up their machines in standard working conditions (as opposed to specific test conditions ). In addition coin-processing machines are listed (chapter II) which have not passed a detection test but for which a declaration of conformity from the manufacturer was received guaranteeing that a successfully tested coin-processing machine and other coinprocessing machine(s) not officially tested, have the same hardware, software and other components used with regard to the detection and rejection of counterfeit euro coins.

2 I: Consolidated list of successfully tested coin-processing machines Test validity period: twelve months from the date of the latest test. MANUFACTURER MODEL OF MACHINE TYPE OF MACHINE DATE of TEST Asahi Seiko CT Coin A/S CT Coin A/S CRL-8EU 15e/CRL-8EU Sensor CRS-8EU CRSB_V0100 CTcoin Euro + Sensor System V4, Pelikan V4 301, 305, 309 Sensor Version of Software Sensor SW CTcoin Euro + Sensor System V5, Pelikan V5 301, 305, 309 Sensor Version of Software Sensor SW September April April 2014 CUMMINS ALLISON Jetsort Jetsort LX CA Sensor 1 Vs January 2014 CUMMINS ALLISON JetSort JetSort LX CA Sensor 1 Vs April 2014 Currency Tech a Giesecke & Devrient Company CTL/GD-301 Model/Version 301 Sensor 4 th generation V December 2014 ETM Inc. TM-305 Sensor June 2014 ETM Inc. TM-300 Sensor June 2014

3 GLORY Mach 6 Wave Model 6980XXX Wave V.7 sensor Softare version March 2014 GLORY SDRC-100 / CI-100C Sensor HGM-3A July 2014 GLORY RCW-8A Sensor HGM July 2014 GLORY RCW-100 / CI-10C Sensor HGM July 2014 GZT (repr. Scan Coin) ICP Active 9 Standard/Flex Sensor December 2014 HBW Cash Solutions PC 8000 Sensor CoinSAFE December 2014 HESS Austria HESS Austria HESS Cash System & Co.KG CCV9.0 Sensorik Model CCV9.0 Sensor CCV9.0 Version of software V0.03 CCV11.0 Sensorik Model CCV11.0 Sensor CCV11.0 Version of software V0.01 Hess Coin Counter Model Coin Counter HDC Sensor V3 V4 23 January January January 2014

4 Laurel Bank Machines Co. LTD Laurel LAC 17 ID Sensor 1.0 Version of software CJ5DE104 / Packaging 11 December Automation NGZ Geldzählmaschinen & Co KG NGZ Geldzählmaschinen & Co KG Novomatic Novomatic Novotech Banksysteme Novotech Banksysteme MC OEM 8 Sensor CM 08 MC- CSENSE-08 V NGZ 6500 NGZ 6500r CJM35E07, JD4DOP03 Laurel LCC30 Laurel LCC30 CJM35E07, JD4DOP03 Upgrade-Kit Contofax/Contovit /Contorex Upgrade-Kit E1/E2/E4 Coin-Select Version of software 22/414 Upgrade-Kit Sortofax/Sortovit /Sortorex Upgrade-Kit E1/E2/E4 Coin-Select Version of software 22/414 SCM(CS/CD) NT ACCEPT 2.0, CM2 Sensor LED+magnetic eur_ecb_v1_0 CCM(CS/CD) NT ACCEPT 2.1, CM3 Sensor LED+magnetic eur_ecb_v1_0 PREMA 300 F MD2 SE/EP 300 F MD2 SE December January January April April November November September 2014 PRC-330 Sensor Adaptive, July 2014 PRC-420 Sensor Matrix, July 2014

5 CC1302 Option RCDS4, V4.00C03 17 June 2014 CC1302, V5.101Txx 17 June 2014 CC2000, V00C05 17 June 2014 AB CS3515, V2.07Txx CS3515, V00C07 CS3550, V2.00C12 CS3320, V5.101Txx CS3321, V5.101Txx CAM 720, version 6 software SC 202, version 6 software 17 June June June June June March March 2014 AB SC 22, 6 20 March 2014 AB AB AB CAM 200, 2, version 3, version 4 CAM 208, software version 2, version 3 version 4 SC 12, 6 20 March March March 2014

6 AB AB AB SELEX GIACOMO PICOLLO SRL Suzhou Ribao Technology Co. Ltd Wincor-Nixdorf International Wincor-Nixdorf International Wincor-Nixdorf International Cash Complete CAM, 12 SC 4000, 5 SC 2200, software version 2 Contovit 2.23 Contovit 3.02 Contofax 2.23 Contofax 3.02 Contorex 2.23 Contorex 3.02 ORION 3D Sensor 18/4709,12/4709, MO CCD 1.01 Coin Sorter and Counter CS-311S Alloy Sensor AD Board 0.1 CINEO Series Coin Conveyor CM3 Software versión EUR.cm3tt Ver. 2.2 ProCash Series Coin Convey Unit 500 Software versión EUR.cmtt Ver. 2.1 icash 15e/15/COR Sensor CRS-8EU CRSB_V March March March May May May May May May 2014 and counting and 12 September March April April September 2014 Disclaimer

7 1. The published table of test results does not certify or guarantee in any way the capacity of the equipment tested to detect counterfeits or to authenticate euro coins and does not imply any recommendation by the OLAF/ETSC or the CNACs that third parties should use the type of machine tested. Thus, to the extent permitted by applicable law, the OLAF/ETSC or the CNACs do not accept any liability whatsoever for any direct or indirect damage resulting from the performance of the tests, the publication, non-publication or removal from the Internet of the test results, or for the tests outcomes. 2. The OLAF/ETSC or the CNAC shall not be held responsible for the interpretation potentially made of the results reported or for results different from those observed during the test. Furthermore, the published table does not imply any warranty by the OLAF/ETSC or the CNACs, whether expressed or implied, that the types of devices tested can detect counterfeit euro coins continuously and without error. This is also the case concerning a machine s fitness for use, or use for purposes other than intended, irrespective of whether the users of the device comply with the user requirements or not. 3. The counterfeit euro coins used for the test reported above shall be, to the best of the knowledge of the OLAF/ETSC and CNACs, those most commonly found in circulation in the euro area at the time of the last update of the counterfeit families used for testing. Since it cannot be excluded that new types counterfeits appear after the most recent update, it is the responsibility of the manufacturer to regularly retest the detection devices and to make appropriate adjustments and modifications to the detection mechanism in the machine with a view to detecting counterfeits discovered after the date of the test.

8 II: List of machines for which a valid declaration on conformity has been received In an effort to avoid excessive administrative procedure and regulatory compliance costs, manufacturers shall be offered the possibility to guarantee conformity for coinprocessing machines which have not been tested. By signing the declaration of conformity, a manufacturer guarantees that a successfully tested coin-processing machine, referred to below as Tested Machine Type, and other coin-processing machine(s) not officially tested, referred to below as Further Machine(s), has the same hardware, software and other components used with regard to the detection and rejection of counterfeit euro coins. The list below contains further machine(s) for which a valid declaration of conformity has been received by the ETSC. MANUFACTURER Further machine (s) Type of machine Tested machine type GLORY GLORY GLORY Mach 6 Wave Model 6980XXX Wave V.7 sensor Softare version Mach 9 Wave Model 6980XXX Wave V.7 sensor Softare version Quickchange Model 99XXXXX Wave V.7 sensor Softare version Mach 6 Wave Model 6980XXX Wave V.7 sensor Softare version HBW Cash Solutions CC 5000 Sensor coinsafe Version of software 1.11 PC 8000 sensor CoinSAFE Version of software V3.03 automation automation MSS 08 Sensor CM 08 MC-CSENSE-08 V MSS 08 basic Sensor CM 08 MC-CSENSE-08 MC OEM 8 Sensor CM 08 MC- CSENSE-08 V

9 V automation automation automation automation automation Opti Coin 10 Sensor CM 08 MC-CSENSE-08 V Sidecar 08 basic Sensor CM 08 MC-CSENSE-08 V MSS 08 sort Sensor CM 08 MC-CSENSE-08 V MC1/MC2 Sensor CM 08 MC-CSENSE-08 V MC10 Sensor CM 08 MC-CSENSE-08 V PREMA 301 F MD2 SE/EP 301 F MD2 SE/EP 3.20 PREMA 400 F MD2 SE/EP 400 F MD2 SE/EP 3.20 PREMA 401 F MD2 SE/EP 401 F MD2 SE/EP / / PREMA 300 F MD2 SE/EP 300 F MD2 SE 3.20

10 3.20 PREMA 300 F MD2 SE/EP MONOSTOP 300 F MD2 SE/EP MONOSTOP 3.20 PREMA 300 F MD2 SE/EP STOP 300 F MD2 SE/EP STOP 3.20 PREMA 405 F MD2 CN 405 F MD2 CN 3.20 PREMA 405 F MD2 CN DC2 405 F MD2 CN DC PREMA 605 F MD2 CN 605 F MD2 CN 3.20 PREMA 605 F MD2 CN DC2 605 F MD2 CN DC PREMA Versomat coin Versomat Coin 3.20 PRC-330, sensor version 1.0 PRC-330, sorting, sensor Adaptive, 1.1

11 PRC-200, sensor version 1.0 PRC-210, sensor version 1.0 PRC-210, sensor version 1.1 PRC-210, sensor version 1.2 PRC-220, sensor version 1.0 PRC-340, sensor version 1.1 PRC-420, sensor version 1.0 PRC-420, sensor version 1.2 PRC-330+, sensor version 1.1 Cashwork Coin200 Adaptive, 0.5 PRC-420, sensor Matrix, 1.0 PRC-420, sorting, sensor Matrix, 1.3

12 PRC-420, sensor Matrix, 1.2 PRC-220, sensor Matrix, 1.0 Cashwork One Revolution, sensor Matrix, 1.0 CS3320 Option RCDS4, V4.00C03 CS3321 Option RCDS4, V4.00C03 CC 1302 Option RCDS4, V4.00C03 Nummus 6531, V00C05 Nummus 6531-V, V00C05 CC2000, V00C05 CS3515, V2.04Txx CS3515, V2.93Txx CC2000, V4.45Txx CS3515, V2.07Txx CC2000, V4.43Txx

13 Nummus 6520, V9.20Txx Nummus 6540, V2.45Txx Nummus 6541, V2.45Txx CS3320, V5.99Txx CS3320, V5.101Txx CS3321, V5.101Txx CS 3321, V5.101Txx CS3310, V5.85Txx CC1302, V5.99Txx CC1301, V5.85Txx CS 1302, V5.101Txx CRS6518, V8.65Txx CDS 720 CAM 720, software version 6

14 CDS 810 CDS 820 CDS 830 CAM 200, version 2, version 3 and version 4 software CDS9 CDP 4 CDS 820 CDS 830 CDS9 CAM 208, version 2, version 3, version 4 software RCS 400 RCS 800 Cash Complete POS Cash Complete CAM, 12

15 Sortofax 2.23 Contofax 2.23 Sortovit 2.23 Contovit 2.23 Sortorex 2.23 Contorex 2.23 Sortovit 3.02 Contovit 3.02 Sortorex 3.02 Contorex 3.02 Sortofax 3.02 Contofax AB software version

16 SELEX GIACOMO PICOLLO SRL MOON 3D Sensor 18/ core software and SELEX GIACOMO PICOLLO SRL ORION 3D Sensor

17 SELEX GIACOMO PICOLLO SRL SELEX GIACOMO PICOLLO SRL Suzhou Ribao Technology Co. Ltd Suzhou Ribao Technology Co. Ltd Suzhou Ribao Technology Co. Ltd Suzhou Ribao Technology Co. Ltd Suzhou Ribao Technology Co. Ltd Suzhou Ribao Technology Co. Ltd Suzhou Ribao Technology Co. Ltd MIX VALUE 3D Sensor 12/ core software SELEX D Sensor MO CCD 1.01 core software Coin Sorter and Counter CS-211S Alloy Sensor AD Board 0.1 Coin Sorter and Counter CS-610S Alloy Sensor AD Board 0.1 Coin Sorter and Counter CS-910S Alloy Sensor AD Board 0.1 Coin Sorter and Counter QF-10 Alloy Sensor AD Board 0.1 Coin Sorter and Counter CashConcepts CCE 417 Alloy Sensor AD Board 0.1 Coin Sorter and Counter CashConcepts CCE Alloy Sensor AD Board 0.1 Coin Sorter and Counter CashConcepts CCE Alloy Sensor AD Board 0.1 and and and and and and and and 18/4709,12/4709, MO CCD 1.01 Suzhou Ribao Technology Co. Ltd Coin Sorter and Counter CS-311S Alloy Sensor AD Board 0.1

18 Disclaimer: The machines in the list above have not been tested by the ETSC or a CNAC but, according to the manufacturer, are identical with the Tested Machine Type regarding the detection of counterfeit coins.