Innovative Lighting Smooth Light Recessed Luminaires

Transcription

1 Installation Guide Innovative Lighting Smooth Light LED Recessed Luminaires BEFORE YOU BEGIN INSTALLATION Read these instructions carefully. Failure to follow these instructions will invalidate the warranty on this product. WARNING Risk of fire or electrical shock. Disconnect power before installing or servicing product. CAUTION Use caution during installation. The use of gloves and protective eyewear is recommended. Save these instructions for reference Smooth Light LED Recessed Luminaire Installation Guide, Rev. 1.0, Date: 8/29/13

2 Innovative Lighting Smooth Light LED Recessed Luminaires provide all the benefits of LED lighting with th the look of fluorescent fixtures. Innovative Lighting Smooth Light LED Recessed Luminaires Lumina come in two series, the A-Series Series and the G G-Series,, and each comes in both 2 x2 and 2 x4 models: models Light A-Series Innovative Lighting Smooth Li Innovative Lighting Smooth Light G-Series G Innovative Lighting Smooth Light LED Recessed Luminaires are designed for new construction or retrofit projects. designed for ceiling mount ount using a T T-Bar ceiling grid. suitable for use with a suspended ceiling. suitable for Type IC and Type non non-ic applications. suitable for dry and damp locations. designed to operate over an input voltage range of VAC, 50/60 Hz. Take note of the following warnings when installing Innovative Lighting Smooth Light LED Recessed Luminaires. WARNING Risk of fire or electric shock shock. Innovative Lighting Smooth Light LED Recessed Luminaire installation nstallation requires knowledge of luminaire and electrical systems. If not qualified, do not attempt installati installation. on. Contact a licensed electrician to complete the installation. WARNING To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects. WARNING All All wiring must be in co compliance mpliance with NEC and local codes. THIS PRODUCT MUST BE E INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. CE PRODUIT DOIT ETRE INSTALLE SELON LE CODE D INSTALLATION PERTINENT, PAR UNE PERSONNE QUI CONNAIT BIEN LE PRODUIT ET SON FONCTIONNEMENT AINSI QUE LES RISQUES INHERENTS. 2

3 Installation: 1. TURN OFF POWER. DO NOT ATTEMPT INSTALLATION UNTIL IT IS VERIFIED THAT THE POWER IS OFF. 2. Place the Innovative Lighting Smooth Light LED Recessed Luminaire into the T-Bar ceiling frame. 3. Remove the access plate in the back of the luminaire. The access plate will have a green GND wire connected to it with a green GND screw. The green GND wire will connect into a 3- terminal quick disconnect connector along with the white neutral input wire and the black line input wire to the luminaire. 4. Break out one of the knock outs in the access plate and attach the conduit for the ac input wires. Plug each of the ac input wires into the 3-terminal quick disconnect connector according to the colors on the connector inputs and as shown in the drawing below: GREEN GROUND, WHITE NEUTRAL, BLACK LINE 5. If the optional 0-10V dimming control of the luminaire is to be used, break out the second knock out in the access plate and attach the dimming conduit for the dimming control wires. Connect the dimming control wires according to the colors of the wires and as shown in the drawing below: VIOLET DIM (+), GRAY DIM (-) 6. Push the wiring and connectors back into the luminaire and replace the access plate into the back of the luminaire. 7. Turn the power back on and verify that the Innovative Lighting Smooth Light LED Recessed Luminaire has been installed correctly. Save these instructions for reference 3

4 This page intentionally left blank 4

5 Purchase Date: Warranty Expiration Date: Thank you for your purchase of Innovative Lighting Smooth Light LED Recessed Luminaires. Please keep the top portion of this page for your records and mail the bottom portion to the address provided to register your product. WARRANTY INFORMATION Innovative Lighting LLC, Limited Product Warranty is TEN (10) YEARS from date of purchase on Innovative Lighting Smooth Light LED Recessed Luminaires and their components. Any product developing such defect in material or workmanship within this period will be repaired or replaced with a like product, at our option (IL) providing it is sent to us, transportation charges prepaid. Proof-of- Purchase date must accompany return to IL at our Roland, Iowa facility. IL does not warrant contractor s installation work or performance. This warranty is void if the product warranted has been damaged by accident or unreasonable use, neglect, improper installation or service, or other cause not arising out of defects in material or workmanship. This TEN (10) YEAR Limited Product Warranty is not transferable and applies to the original installation of the Innovative Lighting Smooth Light LED Recessed Luminaires for as long as the original purchaser owns them. SHIPPING DAMAGE The Innovative Lighting Smooth Light LED Recessed Luminaires should be examined for shipping damage upon receipt. The components in the kits have been carefully inspected before shipment. Any claim for loss or damage must be made to the carrier, which will provide any necessary inspection reports and/or claim forms. PRODUCT REGISTRATION PRODUCT INFORMATION Smooth Light LED Recessed Luminaire Model: Smooth Light LED Recessed Luminaire Date Code (YYMMDD on label): Date of Purchase: Number of units purchased: OWNER INFORMATION Name: Company: Address: City: State: Zip: Phone: Owner Signature: Mail to: Innovative Lighting, LLC, P.O. Box 366, Roland, Iowa INSTALLER INFORMATION Name: Company: Address: City: State: Zip: Phone: Installer Signature: