T8 LED Tube. Plug & Play. Applications. Key Features. General Usage. 5years

Size: px

Start display at page:

Download "T8 LED Tube. Plug & Play. Applications. Key Features. General Usage. 5years"

Shawn Park
6 years ago
Views:

T8 ED Tube The ReneSola T8 ED Tube with its Plug and Play power, makes installation much easier.

$months back. at a fraction of the wattage, get more light output of your existing system.$ savings compared to traditional T8 fluorescent lamps High Efficacy, increased energy saving Replaces

savings compared to traditional T8 fluorescent lamps High Efficacy, increased energy saving Replaces

allowing the fixture to maintain original U compliance Instant start; does not flicker or buzz Suitable for

1 T8 ED Tube The ReneSola T8 ED Tube with its Plug and Play power, makes installation much easier. With 100+ compatible ballasts, all you have to do, is take the old lamp out and put the new 100+ l/w energy efficient ED lamp in. no rewiring or high cost of labor and no need to throw out a completely good working ballast you put in few months back. at a fraction of the wattage, get more light output of your existing system. Applications Key Features Environmentally friendly; free of mercury, UV and IR emissions Up to 60% energy savings compared to traditional T8 fluorescent lamps High Efficacy, increased energy saving Replaces existing fluorescent T8 lamps without removing the electronic ballast Eliminating the need for rewiring; allowing the fixture to maintain original U compliance Instant start; does not flicker or buzz Suitable for damp locations Offices Hospitality Retail Shopping Malls Restaurants General Usage Ideal replacement of Fluorescent T8 & T12 tubes 5years Warranty CRI (Ra) >80 PF >0.9 Non-Dimmable 50000h IP ~ K ON K 5000K

2 T8 ED Tube T8 ED Tube Specification Model Base Watt(W) Dimmable Beam Angle( o ) umens(lm) CCT(K) Body Material RT8012AU0102 G13 15 No 4000 RT8012AU0103 G13 15 No 5000 RT8018X0401 G13 15 No 5000 RT8018X0403 G13 18 No RT8018X0405 G13 18 No Glass Glass PC+1/2A PC+1/2A PC+1/2A Ordering Guide Model UPC NO. Size (mm) Single Net Weight (Kg) Carton Dimension(mm) Carton Volume (M 3 ) Gross Weight of Carton (Kg) Quatity in Carton (Pcs) RT8012AU *210* RT8012AU *210* RT8018X RT8018X RT8018X Compatibility Chart Compatible only with the ballasts listed below so far, if you intend to install ballast compatible tube with ballasts not listed below, risk of damage or losses may occur. ReneSola disclaims liability for any damage or losses by not following the instructions in this document. Compatibility subject to change as additional ballasts are tested. If you do not see your ballast on the list, Please contact ReneSola. ist of Tested Ballasts Item Manufacturer Dimmer Model Item Manufacturer Dimmer Model Item Manufacturer Dimmer Model 1 KEYSTONE KTEB-232RIS-1-TO-S 8 QTP 3*32T8/UNV ISN-SC 15 QTP 3*32T8/UNV ISN-SC 2 ACCUPRO AP-432IP-UNV 9 QTP 4*32T8/UNV ISN-SC 16 QTP 4*32T8/UNV ISN-SC 3 PACIFIC EB-232IS-120-RES 10 QHE 1*32T8/UNV ISN-SC 17 PHIIPS ADVANCE ICN-1P32-N 4 WORK HORSE WH QHE 2*32T8/UNV ISN-SC 18 PHIIPS ADVANCE ICN-2P32-N 5 WORK HORSE WH QHE 3*32T8/UNV ISN-SC 19 PHIIPS ADVANCE ICN-3P32-N 6 QTP 1*32T8/UNV ISN-SC 13 QHE 4*32T8/UNV ISN-SC 20 PHIIPS ADVANCE ICN-4P32-N 7 QTP 2*32T8/UNV ISN-SC 14 QTP 2*32T8/UNV ISN-SC 21 PHIIPS ADVANCE IOPA-1P32-N

3 T8 ED Tube T8 ED Tube Compatibility Chart ist of Tested Ballasts Item Manufacturer Dimmer Model Item Manufacturer Dimmer Model Item Manufacturer Dimmer Model 22 PHIIPS ADVANCE IOPA-2P32-N 51 UNIVERSA B332IUNVHP-A (Triad) 80 GE GE432MAX-N/UTRA 23 PHIIPS ADVANCE IOPA-3P32-N 52 UNIVERSA B432IUNVHP-A (Triad) 81 QHE 1x32T8/UNV IS-SC 24 PHIIPS ADVANCE IOPA-4P32-N 53 UNIVERSA B132IUNVHE-A (UTIM) 82 QHE 2x32T8/UNV IS-SC 25 GE GE-132-MV-N 54 UNIVERSA B232IUNVHE-A (UTIM) 83 QHE 3x32T8/UNV IS-SC 26 GE GE-232-MV-N 55 UNIVERSA B332IUNVHE-A (UTIM) 84 QHE 4x32T8/UNV IS-SC 27 GE GE-332-MV-N 56 UNIVERSA B432IUNVHE-A (UTIM) 85 GE GE-132-MAX-H/UTRA 28 GE GE-432-MV-N 57 KEYSTONE KTEB-432-UV-IS-N-P 86 GE GE-232-MAX-H/UTRA 29 GE GE432MAX-G-N 58 HOWARD INDUSTRIES EP3/32IS/MV/MC/HE 87 GE GE-332-MAX-H/UTRA 30 GE GE232MAX-G-N 59 PR0UME EP232IS//MV/HE(Halco) 88 GE GE-432-MAX-H/UTRA 31 GE GE RESDIYB 60 SUNPARK U-1/32ISE-HBF 89 QHE 1x32T8/UNV PSN-MC 32 GE GE RES-DIY 61 SUNPARK U-2/32ISE-HBF 90 QHE 2x32T8/UNV PSN-MC 33 GE GE432MAXP-H/UTRA 62 SUNPARK U-3/32ISE-HBF 91 QHE 3x32T8/UNV PSN-MC 34 GE GE132MAX-/UTRA 63 SUNPARK U-4/32ISE-HBF 92 QHE 4x32T8/UNV PSN-MC 35 GE GE232MAX-/UTRA 64 QHE 2x32T8/UNV PSH-HT 93 UNIVERSA B132IUNVHP-N 36 GE GE332MAX-/UTRA 65 QHE 3x32T8/UNV PSH-HT 94 UNIVERSA B232IUNVHP-N 37 GE GE432MAX-/UTRA 66 QHE 4x32T8/UNV PSH-HT 95 UNIVERSA B332IUNVHP-A 38 GE GE432MAXP-/UTRA 67 Universal B232IUNVHP-B(Triad) 96 UNIVERSA B432IUNVHP-A 39 GE GE432MV-N-42T 68 QHE 2*59T8/UNV IS-SC 97 UNIVERSA B132IUNVHE-A 40 PHIIPS IOP-1PSP32-SC 69 PHIIPS ADVANCE IOP-1PSP32-W-SC 98 UNIVERSA B232IUNVHE-A 41 PHIIPS IOP-2PSP32-SC 70 PHIIPS ADVANCE IOP-2PSP32-W-SC 99 UNIVERSA B332IUNVHE-A 42 PHIIPS IOP-3PSP32-SC 71 PHIIPS ADVANCE IOP-3PSP32-W-SC 100 UNIVERSA B432IUNVHE-A 43 PHIIPS IOP-4PSP32-SC 72 PHIIPS ADVANCE IOP-4PSP32-W-SC 101 SUPERIOR IFE PHIIPS IOP-4P32-W-N 73 GE GE132-MVPS-N 45 PHIIPS REB-1P32-SC 74 GE GE232-MVPS-N 46 PHIIPS REB-2P32-SC 75 GE GE332-MVPS-N 47 PHIIPS REB-3P32-SC 76 GE GE432-MVPS-N 48 PHIIPS REB-4P32-SC 77 GE GE132MAX-N/UTRA 49 UNIVERSA B132IUNVHP-A (Triad) 78 GE GE232MAX-N/UTRA 50 UNIVERSA B232IUNVHP-A (Triad) 79 GE GE332MAX-N/UTRA

4 T8 ED Tube T8 ED Tube Dimensions Photometry G13 Illuminance-Distance Curve 15W G13 Illuminance-Distance Curve 18W Internal Connection Diagram Installation Guide ampholder ampholder ED Tube Fluorescent Fluorescent N AC ~ Switch Electronic Ballast ED T8 ED T8 1. Danger-risk of shock-disconnect power before installation. 2. Remove diffuser ( if provided). 3. Remove the existing fluorescent lamps from the luminaire Install the ReneSola ED T8 Instant Fit/Compatible lamp (one for each fluorescent lamp removed). 5. Replace diffuser (if removed in step 2). 6. Switch on power to the luminaire. CAUTION If the lamp or the luminaire exhibits any problems during operation (buzzing, flickering, etc.) immediately turn off the power, remove the lamp from the luminaire and contact the manufacturer. Risk of fire do not install in pre-heated luminaire; suitable for use in dry or damp locations; can be used with or without a diffuser. This product may cause interference with radio equipment and should not be installed near maritime safety communications or other critical navigation or communication equipment operating between MHz. These devices are not intended for use with emergency exit features of emergency exit lights. This lamp only operates with electronic ballasts. If the lamp does not light up when the luminaire is energized, remove the lamp from the luminaire and contact the manufacturer or a qualified electrician.

5 T8 ED Tube T8 ED Tube Other Information Minimum operating temperature: -20 C U/CU & DC listed, FCC compliant, RoHS compliant Suitable for use in open luminaries (fixtures) Suitable for use in damp locations This device is not intended for use with emergency exit fixtures or emergency lighting Turn off power before changing lamp This lamp is not compatible with photo controls, occupancy sensors, or timing devices This lamp is not suited for totally enclosed fixtures Risk of electric shock. Do not use where directly exposed to water For more Information, please contact 5650 Tomken Road, Unit 14. Mississauga ON 4W 4P1 +1(877) Follow us All Rights Reserved. Specifications are subejct to change without prior notice.

LED Tube T8 Plug & Play-E-Ballast only

LED Tube T8 Plug & Play-E-Ballast only ED Tube T8 Plug & Play-E-Ballast only Description Environmentally friendly; free of mercury, UV and IR emissions Up to 60% energy savings compared to traditional T8 fluorescent lamps High Efficacy, increased