MicroTool. Not just a simple Measuring Instrument A complete Tool to support your daily activities FLUE GAS ANALYSERS

Transcription

1 "Excellence in measurements" MicroTool Not just a simple Measuring Instrument A complete Tool to support your daily activities FLUE GAS Visual/Audible Alarm Differential Manometer Differential Thermometer :30 200hPa MAX 98.3 MIN 75.3 HI inh2o Non-Contact Thermometer Temperature and Humidity Gas Leak Detectors (Sniffer) eurotron LEAK TEST SETUP Next page Change setting Ambient CO and CO 2 Pocket Clip / Magnet Rugged with built-in rubber protection High Quality and Advanced Design Graphic LCD 128x128 pixels Ice Blue Backlit Printer IR Port Wireless Port Datalogging with Real Time Clock Vibration eurotron DISPLAY PRESSURE to change status to change menu eurotron GAS VELOCITY SETUP Next page Change setting Bulletin a E ed Mini-USB Port with Li-Ion Rechargeable Battery Pack TM Windows Software Ce r t Q Eurotron Instruments if ie d Q ual m y it Sy e t s SN: /12/07 13:10: C 12/12/07 13:11: C 12/12/07 13:12: C 12/12/07 13:13: C 12/12/07 13:14: C All the descriptions are related to the full optional instrument. See the ordering code for different configurations.

2 FLUE GAS Introduction Precision, design and resistance are the main points on what the new series of measuring instruments for heating, conditioning and venting are focused on. Not just instruments, but true and serious mutilfunction tools for intensive and daily work. Several models are available for most of verification and plants control activities: Dual input thermometer for surface, immersion and atmospheric measuring; Infrared thermometer for non-contact temperature measuring; Differential pressure meter; Relative humidity and atmospheric temperature; Refrigerant and combustible gases leak detectors; Reflux control (electronic mirror) for atmospheric boilers; CO ambient measuring; Ambient Carbon Dioxide measuring; All models feature a 128x128 pixels graphic display, icon menu, built-in rubber holster and advanced functions. Some models are manufactured with internal memory for datalogging, IR printer interface and USB port that can also be used to recharge the Li-ION batteries (optional). The standard package includes pocket clip, silicon tube 50 cm long, instruction manual Ordering Code P PA200 + M200 M500 PA200 Differential Manometer Compact pressure meter with several ranges, selectable measuring unit (11 units availables) and several advanced functions: leak test procedure; velocity of air with density compensation measurement with Pitot tube (not included); Zeroing and Tare function. A maximum and minimum alarm threshold can be programmed and the high brightness, 2-color leds will start to blink together with an audio signal. The icon menu make the instrument very easy to be used. 200 Pa can be used to measure atmospherical boilers. + features: IR printer port Internal memory for datalogging with real time clock USB port Battery recharging arrangement 200 mbar Range 500 mbar Range 200 Pascal Range Magnetic Plate : Model PA200 Range: ±200 Pa Resolution: 0.1 Pa Accuracy: ±0.5 Pa from -10 to 10Pa; ±3 Pa otherwise Model M200 Range: double ±40 hpa / hpa / mbar Resolution: 0.01 hpa / 0.1 hpa Accuracy: Range ±40 hpa: ±0.03 hpa up to 300 Pa; ±1% rdg. otherwise Range ±200 hpa: ±0.5 hpa up to 50 hpa; ±1% rdg. otherwise Leak test procedure included Model M500 Range: ±500 hpa / mbar Resolution: 0.1 hpa Accuracy: ±(1% rdg hpa) Leak test procedure included The pocket clip is included in the standard package, so that the instrument is always ready to be used. Available KITS: EE Stack draught probe EE Silicone tube for pressure measurements BB Pitot tube 300 mm EE Magnetic plate Procedure with report printing included! (model +) + SN: Date: 13/02/2008 Time: 13:42 P1 : mbar P2 : 99.0 mbar P2-P1 : -2.3 mbar dt : 900 s Connections: connector for tube 4/6 mm Measuring fluid: compatible with air and non corrosive dry gases (i.g..methan) Pressure Units: Pa, hpa, kpa, mbar, bar, mmh2o, mmhg, inh2o, inhg, PSI, kgf/cm2 Air velocity units: m/s, fpm Dual signal led, audio signals (P+ model only) alarm based Autoswitch (selectable) Operative modes: Max, Min, Hold, Alarm LO/HI, battery level, Zero/Tare, Pressure decay leak test, gas flow meter. Pressure temperature compensated Battery type: nr. 3 AAA-type alkaline Battery life: 50 hours (average with backlight witched off) Working temperature: from -10 to +50 C Store temperature: from -20 to +60 C Dimension (L x A x P): 120x64x35 mm Weight: 150 gr. 2

3 "Excellence in measurements" FLUE GAS MicroTool IR Cat.:8141 MicroTool IR n.3 AAA-type Non-contact IR Thermometer Infrared thermometer for non-contact surfaces temperatures measurements. Very easy to use with icon menu and fully programmable. IR+ model also features a built-in sensor for measuring the air temperature. Optics: D:S=12:1 Range: from -30 to 500 C Precision: ±1 C from 0 to 100 C ; ±2% rdg. otherwise Resolution: 0.1 C from 0 to C Spectral range: 8-14 µm Emissivity: pre-set at 0.95, adjustable from 0.20 to 1.00 Laser pointer Ambient temperature sensor Range: from -10 to 50 C Resolution: 0.1 C Precision: ±0.5 C Dual signal led and audio indicator alarm based Operative mode: Max, Min, Hold, Alarm LO/HI, Battery level, Emissivity Labels for polish surfaces KIT Emissivity=0.95 up to 250 C Diameter 35 mm 10 pieces package MicroTool IRH Cat.: 8331 MicroTool IRH Cat.: 8331-P MicroTool IRH+ n. 3 AAA-type ThermoHygrometer and Non Contact Thermometer Infrared thermometer for non-contact surface temperature measurements with built-in sensor for the air temperature and air relative humidity measurements. Very easy to use with the icon menu and fully programmable. IRH+ model also features an internal memory to store measures and for long time datalogging. Optics: D:S=20:1 Range: from -30 to 600 C Precision: ±1.5% rdg or ±1.5 C Resolution: 0.1 C from 0 to 70 C; ±1.5% rdg. from 70 C to f.s. Spectral range: 8-14 µm Emissivity: preset at adjustable from 0.20 to 1.00 Laser Pointer Built-in T+RH% Sensor Ambient Temperature Range: 10 to 60 C Resolution: 0.1 C Precision: ±0,5 C Relative Humidity Range: 5 to 95% Resolution: 0.1%RH Precision: ±2.5% Dual signal led, vibration (model IRH+ only) and audio indicator alarm based Operative mode: Max, Min, Hold, Alarm LO/HI, Battery level, Emissivity, wet bulb, dry bulb, dew point. MicroTool IRH+ model features: Vibration alarm IR printer port Datalogging internal memory with real time clock Battery recharging arrangement Cat.: 8115 Cat.: 8115-P + n.3 AAA-type Differential Thermometer Dual-input thermocouple Tc K and TC T thermometer, Max, Min, Diff, C, F temperature measurement functions and differential measurements. An Hi/Lo alarm threshold can be programmed and the high brightness bi-colour leds will start to blink, together with audio alarm. Easy to use with the icon menu. + model features: IR printer port Datalogging internal memory with real time clock USB port Battery recharging arrangement Inputs: Tc type K and Tc type T Range Tc type K: from -50 to 1000 C Precision Tc type K: ±(0.3% rdg C) from - 40 to 900 C; ±(0.5% rdg C) otherwise Range Tc type T: from -50 to 400 C Precision Tc type T: ±0.3 C from -20 to 70 C; ±(0.5% rdg C) otherwise Resolution: 0.1 C up to C Measure Unit: C / F selectable Dual signal led, audio indicator and vibration (model T+ only) alarm based Operative mode: Max, Min, Hold, Diff., Alarm LO/HI, Battery level 3

4 FLUE GAS MicroTool CO Cat.: 7897 Cat.: 7897-P MicroTool CO MicroTool CO+ n. 3 AAA-type Carbon Monoxide Meter (CO) This analyser measures the ambient carbon monoxide concentration in rooms and near to thermal plants in order to check the absence of the poisonous gas refluxes. A programmable datalogger operative mode can be used to store measures, download them to the PC or print to the optional thermal IR printer. Advanced procedures in compliance with international regulations (Qualigaz, Room test BS7967) can be also performed in order to check the installation security. Sensor type: electrochemical Range: from 0 to 2000ppm Resolution: 1ppm Precision: ±10ppm up to 100ppm; Response time: <30 sec Dual signal led and audio indicator alarm based Operative mode: Max, Min, Average, Hold, Alarm LO/HI, Battery level, datalogging Interface for IR printer Battery recharging arrangement MicroTool CO 2 Carbon Dioxide Meter (CO ) Cat.: 7894-P MicroTool CO 2 n. 3 AAA-type The analyser measures the ambient carbon dioxide concentration in home rooms and offices in order to check the efficiency of the air replacement system. A programmable datalogger operative mode can be used to store measures, download them to the PC or print to the optional thermal IR printer. 11: CO2 ppm 012 MAX 15 MIN 2 Sensor type: NDIR Range: ppm Resolution: 1 ppm Precision: ±50ppm or ±2% rdg. Dual signal led and audio indicator alarm based Operative mode: Max, Min, Average, Hold, Alarm LO/HI, Battery level, datalogging Interface for IR printer Battery recharging arrangement MicroTool Reflux Electronic Reflux Meter for Atmospheric Boilers Cat.: 7899 MicroTool Reflux 4 AA type The most efficient and cheapest system to check combustions gas refluxes in boilers and open water heaters. This system replaces the standard wet mirror method. Anomalous and dangerous working conditions will be alerted by visual and audio indications. Graphic LCD display shows the achieved humidity level. Probe flexible 400mm Battery life: 10 hours (typical) REFLUX 4

5 "Excellence in measurements" FLUE GAS MicroTool CFC Sniffer Cat.: 7893 MicroTool CFC MicroTool CFC Sniffer 4 AA type Refrigerant Gas Leak Detector This instrument indicates the presence of refrigerant gas with visual, audio and vibrating indications. 6 threshold levels with two sensibility ranges (high and low) are available. When sniffer detects gas presence, the operator will be alerted by dual led blinking, by audio sound and by vibration with a speed proportioned to the measured level. The graphic display also shows the measured level value. A high brightness led light, builtin on the top of the sensor, can be switched on for a better sight in dark conditions. The instrument is easier to use with the icon menu. Detected gases: all CFC, HFC, HCFC as R12, R22, R134a, R404a, PURON 412A Sensibility <3g/year 0.1oz./year (R134a) in accordance to EN Sensibility: High and Low selectable Diffusion type sensor easy to be replaced Sensor warmup time: max. 50 seconds Probe flexible 400mm (16 ) with built-in led light Programmable audio alarm Dual signal led, vibration and audio alarm switchable by menu Battery life: 6 hours Cat.: 7895 MicroTool Gas 4 AA type Combustible Gas Leak Detector This instrument indicates presence of combustible gas by visual, audio and vibrating indication. 6 threshold levels with two sensibility ranges (high and low) are available. When sniffer detects gas presence, the operator will be alerted by the dual led blinking, by audio sound and vibration with a speed proportioned to the measured level. The graphic display also shows the measured level value. A high brightness led light, builtin on the top of the sensor, can also be switched on to better sight in dark conditions. The instrument is easier to use with the icon menu. Sensibility: 40ppm (methan) High sensibility: ppm (40/70/125/220/385/680 ppm) Low sensibility: ppm (400/700/1250/2200/3850/6800 ppm); Diffusion type sensor easy to replace Probe flexible 400mm (16 ) with built-in led light Dual signal led, vibration and audio alarm switchable by menu Battery life: 20 hours Classification: Class 1, Div 1 (ABCD) MicroTool GAS LT Sniffer Cat.: 7896 MicroTool Gas LT 4 AA type Combustible Gas Leak Detector The instrument indicate the presence of combustible gas using a visual, audible and vibrating indication. 6 threshold levels with two sensibility range (high and low) are available. When the sniffer detects the gas presence, the operator will be alerted by the dual led blinking, by an audible sound and by a vibration with a speed proportioned to the measured level. The graphic display also shows the measured level value. An high brightness led light, built-in on the top of the sensor, can also be switched on to better look the operating place in dark conditions. The instrument is easier to use with the icon menu. Sensibility: 40ppm (methan) High sensibility: ppm (40/70/125/220/385/680 ppm) Low sensibility: ppm (400/700/1250/2200/3850/6800 ppm); Diffusion type sensor easy to replace Probe flexible 400mm (16 ) with built-in led light Dual signal led, vibration and audible alarm switchable by menu Battery life: 20 hours 5

6 FLUE GAS HVAC Temperature KIT F Differential thermometer also includes: Two velcro sensors for pipes Immersion sensor temperature Contact sensor temperature rofessional KIT F This kit is composed by the necessary instruments for ambient temperature and humidity measurements. The kit is cheap and easy to carry and contains: MicroTool IRH+ Infrared thermometer + Thermohygrometer with datalogging A kit composed by a selection of MicroTool instruments 200Pa differential micro manometer with draft probe. MicroTool CO Ambient carbon dioxide detector Heating HVAC KIT F MicroTool Gas Sniffer Combustible gas leak detector Differential thermomter with: two pipe velcro Immersion temperature sensor Contact temperature sensor This kit is composed by the necessary instruments for the heating technician. The kit is cheap and easy to carry and contains: IRtec MicroRay HVAC Infrared thermometer 200mbar differential manometer with 50 mm long 4/6 mm tubes MicroTool IRH+ Thermohygrometer and IR thermometer with internal memory for datalogging with real time clock Combustible gas leak detector Software MicroTool LogMan Cat.: EE Accessories Thermocouples type K F Pipe velcro Tc K; lenght=320 mm F mm air Tc K; diameter: 4.5 mm Professionals users need to collect, organize and trace the data. MicroTool LogMan Software allows you to download measures TM from MicroTool and save them in Excel format to document in-field activities. F mm contact Tc K; diameter: 4.5 mm EE Kit Li-ion rechargeable battery + USB cable for recharging EE USB battery charger 110Vac EE USB battery charger 220Vac EE Magnetic support EE IR thermal printer EE Thermal paper rolls kit EE ABS carrying case for MicroTool and printer EE ABS carrying case for MicroTool Reflux, Gas Sniffer and CFC F Clamp probe for pipes maximum diameter of 26 mm. WIRELESS coming soon may change without notice. 6