FIRST CHOICE CATERING SPARES LTD DIGITAL TECHNOLOGY APRIL 2015 FS

Transcription

1 DIGITAL TECHNOLOGY APRIL 2015 FS

2 Flue Gas Analyser TESTO 310 FLUE GAS ANALYSER The Testo 310 Flue Gas Analyser combines ease of use with a high level of accuracy, and is ideal for measuring the performance of gas systems in commercial catering equipment, including COMCAT 5 forced draft burners, to ensure compliance with Gas Safety (Installation and Use) Regulations Highly accurate sensors analyse the flue gas mixture and automatically calculate all relevant measurement parameters. Robust Robust and light instrument for daily use, excellently suitable even for rough and dirty surrounding. Backlit Display Multi line display and clear menu structure make it simple to operate and easy to read. 30 SECONDS Fast Sensor Zeroing Automatic zeroing of the gas sensor in only 30 seconds after starting. Lithium Rechargeable Battery Lithium rechargeable battery (1500 mah) with up to ten hours running time. Recharging via USB possible. Probe Filter Quickly and easily exchangeable. Magnetic Attachment Integrated magnets for easy fixing. Condensate Trap Integrated condensate trap that is quickly and easily emptied. Optional Printer Allows you to create clear reports on site as required. Specially developed for the 310, the thermal printer connects via an infrared interface. The Testo 310 conforms to EN50379 and meets the requirements of engineers working to BS7967.

3 Flue Gas Analyser The Testo 310 has four core measurement menus: flue gas, ambient CO, draught and pressure. The instrument has two measurement sensors for O 2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From this data, all relevant measurement parameters such as CO 2 value, degree of effectivity and flue gas loss are calculated. The printer, specially developed for the Testo 310, including infrared interface, allows you to create clear reports on site as required. The current measurement value can be printed out of any measurement menu during or after the measurement. Accurately Measures: Oxygen (0 to 21% v/v) Carbon monoxide (0 to 4000ppm) Flue and inlet temperature Differential pressure (±40mbar) Draught (±20mbar) Calculates: Carbon dioxide (CO 2 ) CO/CO 2 ratio Efficiency Excess air Multi-Fuel: Natural Gas, LPG, Propane, Butane, Light Oil, Heavy Oil, Kerosene, Wood Pellets Dimensions: 201 x 83 x 44 mm Weight: approximately 700 g Power: Rechargeable battery 1500 mah, mains unit 5V / 1A TESTO 310 FLUE GAS SET includes battery with mains charger, 180mm probe & cone, 5 particle filters, silicon hose and moulded case TESTO 310 FLUE GAS SET WITH PRINTER in addition to above includes IR printer ( ) and 2 rolls of thermal paper in a moulded case TESTO IR PRINTER with wireless infrared interface for use with Testo 310 only supplied with 1 roll of thermal paper and 4 AA batteries ROLLS OF THERMAL PAPER FOR IR PRINTER permanent ink remains legible for up to 10 years SPARE PARTICLE FILTERS FOR TESTO 310 Measuring range Accuracy ±1 digit Resolution Adjustment time t90 Temperature (flue gas) 0.0 to C ±1 C (0,0 to 100,0 C) 0.1 C < 50 sec ±1.5 % of reading ( > 100 C) Ambient temperature -20 to C ± 1 C 0.1 C < 50 sec Draught measurement to hpa ± 0.03 hpa (-3.00 to +500 hpa) ± 1.5% of m.v. (remaining range) 0.1 hpa - Pressure measurement -40,00 to hpa ± 0.5 hpa 0.1 hpa - O 2 measurement 0.0 to 21.0 vol.% ± 0.2 vol.% 0.1 vol. % 30 sec CO measurement 0 to 4000 ppm ±3 ppm (0 to 30 ppm) 1 ppm 60 sec ±10 % of M.V. (31 to 200 ppm) ±20 ppm ( ppm) ±5 % of M.V. (401 to 2000 ppm) ±10 % of M.V. (2001 to 4000 ppm) Ambient CO 0 to 4000 ppm ±3 ppm (0 to 30 ppm) 1 ppm 60 sec ±10 % of M.V. (31 to 200 ppm) ±20 ppm ( ppm) ±5 % of M.V. (401 to 2000 ppm) ±10 % of M.V. (2001 to 4000 ppm) Determination degree of effectivity (Eta) 0 to 120 % % Exhaust gas loss 0 to 99.9 % %

4 CO/CO2 Ambient Air Monitor TESTO CO/CO 2 IN AMBIENT AIR MONITOR The Testo provides parallel and direct CO/CO 2 measurement in ambient air according to EN It is ideal for measuring air quality around gas heated equipment in a commercial catering premises and ensuring safe working conditions. Convenient and easy operation with direct display of both gases with optical/audible signals that let you know immediately when the adjustable limit values have been exceeded. Optional printer with infrared interface allows you to create clear reports on site as required. Auto shut off and a Lithium polymer rechargeable battery ensure that the instruement can be used for long periods of time between recharges. Accurately Measures: Carbon monoxide (0 to 100 ppm) Carbon Dioxide (0 to 10,000 ppm) Humidity (+5 to +95 %RH) Temperature (-10 to +60 C) Operating Temperature: 0 to +40 C Dimensions: 190 x 65 x 40 mm Weight: Power: 200 g Rechargeable Lithium polymer battery pack with approx 10h continuous use TESTO AMBIENT CO/CO2 AIR MONITOR includes battery with USB mains charger in a soft case TESTO AIR MONITOR WITH PRINTER in addition to above includes IRDA printer ( ) and 2 rolls of thermal paper for the printer in a soft case TESTO IRDA PRINTER with wireless infrared interface supplied with 1 roll of thermal paper and 4 AA batteries ROLLS OF THERMAL PAPER FOR IR PRINTER permanent ink remains legible for up to 10 years Optional IRDA Printer Measuring range Accuracy ±1 digit Resolution CO Sensor 0 to 100 ppm ±3 ppm (0 to 20 ppm) 0.5 ppm ±5 ppm (> 20 ppm) ±300 ppm (0 to 4,000 ppm) CO 2 Sensor 0 to 10,000 ppm ±8% of mv (4,000 to 6,000 ppm) 10 ppm ±500 ppm (6,000 to 10,000 ppm) Temperature/Humidity Module +5 to +95 %RH ±2.5 %RH (5 to 95 %RH) 0.1 %RH -10 to +60 C ±0.5 C (±1 digit)

5 Pressure/Air Flow Measurement TESTO 510 DIFFERENTIAL PRESSURE METER The differential pressure meter is ideally suitable for pressure measurements in the range 0 to 100 hpa and is temperature-compensated for accurate readings. Readings can be displayed in Pascal over the whole measurement range. Magnets at the back of the instrument enable hands-free operation Measuring Range: Accuracy: Resolution: Switchable units: 0 to 100 mbar ±0.03 mbar (0 to 0.30 mbar) ±0.05 mbar (0.31 to 1.00 mbar) ±(0.1 mbar %of mv) (1.01 to 100 mbar) 0.01 mbar hpa, mbar, Pa mmh 2 O, mmhg, inh 2 O, inhg, psi, m/s, fpm Operating Temperature: 0 to +50 C Dimensions: 119 x 46 x 25 mm Weight: 90 g Power: 2 batteries type AAA typical life of 50h continuous use TESTO 510 DIFFERENTIAL PRESSURE METER with protection cap, wrist strap, belt holder, batteries and calibration protocol TESTO 410 VANE ANEMOMETER Testo measures flow velocity and temperature. It is ideal for quick spot checks at air outlets on account of its integrated measurement with the 40mm vane. Hold function with max/min values and timed mean calculation is possible. In addition to air speed and temperature, testo also measures air moisture. Testo's very own, patented humidity sensor guarantees accurate readings. In this way, air conditions can be reliably checked. Probe - NTC: Measuring Range -10 to +50 C Accuracy ±0.5 C Resolution 0.1 C Probe - Vane: Measuring Range 0.4 to 20 m/s Accuracy ±(0.2 m/s + 2% of mv) Resolution 0.1 m/s Humidity Sensor: Measuring Range 0 to 100 %RH (model only) Accuracy ±2.5 %RH (5 to 95 %RH) Resolution ±0.1 %RH Operating Temperature: -10 to +50 C Dimensions: 133 x 46 x 25 mm Weight: 110 g Power: 2 batteries type AAA with typical life of 100h continuous use Part No Description TESTO VANE ANEMOMETER with integrated NTC air thermometer, batteries and calibration protocol, wrist strap, belt holder, protective cap TESTO VANE ANEMOMETER WITH HUMIDITY with integrated NTC air thermometer, Humidity Sensor batteries and calibration protocol, wrist strap, belt holder, protective cap

6 Gas Leak Detectors TESTO FLUE GAS LEAK DETECTOR The Testo flue gas spillage detector reliably detects escaping heating gases. The practical instrument immediately gives off a visual and audible alarm. It is therefore not necessary to actually see the detector. The bendable probe facilitates applications in confined areas. Reliable recognition of escaping flue gases Bendable measurement probe for points which are difficult to access Audible and visual alarm Uses 3 AAA micro batteries Dimensions 128 x 46 x 18mm with 200mm long probe Weight 300g TESTO FLUE GAS LEAK DETECTOR Supplied with flexible probe and batteries TESTO NG/LPG GAS LEAK DETECTOR Highly practical gas leak detector for fast checks on gas pipe connections, with visual bar display. Measuring range - 0 to 20,000 ppm CH 4 (Methane) 0 to 10,000 ppm C 3 H 4 (Propane) Lower response threshold ppm CH 4 / 50 ppm C 3 H 4 1st alarm limit - 10,000 ppm CH 4 / 5,000 ppm C 3 H 4 Shows gas concentration in visual bar display Sensor self-test following switch-on Audible confirmation of readiness to operate Increasing alarm sounds with increasing gas concentration Continuous sound if alarm threshold is exceeded 2 AAA batterries with battery monitoring and optical display Self-test function Part No Description TESTO NG/LPG GAS LEAK DETECTOR Supplied with case, belt clip, wrist strap and batteries TESTO REFRIGERANT LEAK DETECTOR Optimal sensitivity to all CFC, HCFC, and HFC refrigerants, detecting leaks as small as 4g/a, enables the service technician to quickly locate even the smallest leaks. Conforming with F-gas regulations. Electrochemical heated diode sensor technology High/low sensitivity adjustment Automatic background adjustment Progressive LEDs to indicate leak size and audible alarm Detectable refrigerants R-22, R134a, R-404A, R410A, R-507, R438A and all CFC's, HFC's and PFC's Conforms: SAE J1627, EN 14624, EG 2004/108/EG Power: 2 D batteries for 16 hours continuous use e TESTO REFRIGERANT LEAK DETECTOR Includes sensor tip, transport case, calibration protocol, batteries, filter and instruction manual.

7 Digital Refrigeration Technology TESTO DIGITAL REFRIGERATION MANIFOLDS A range of high-performance Digital Manifolds that accurately perform temperature and pressure measurements in seconds. They can automatically calculate superheat and subcooling for a wide range of different refrigerants quickly and easily. They can be used to service, maintain and commission all types of air conditioning, refrigeration and heat pump systems, perform timed pressure drop tests as well as standing pressure tests required for properly commissioning AC/R systems. TESTO Pressure and temperature measurement for all servicing tasks. TESTO With integrated vacuum measurement and 4-way valve block for commisioning and general service work TESTO For all demanding tasks such as error analysis Part No Integrated temperature measurement l l l (up to 2 NTC probes) (up to 2 NTC probes) (up to 3 NTC probes) Temperature-compensated leakage test l l l Heat pump mode l l l 4-way valve block X l l Automatic absolute pressure measurement X l l Internal memory, optional Easycool software X X l Refrigerant update by customer X X l Pressure measurement accuracy` 0.75%fs 0.5%fs 0.5%fs Identical pressure measuring range HP/LP up to 50bar up to 50bar up to 50 bar Connections 3x7/16"-UNF 3x7/16"-UNF plus 1x5/8"-UNF 3x7/16"-UNF plus 1x5/8"-UNF Pressure Media CFC, HFC, N, H 2 O, CO 2 CFC, HFC, N, H 2 O, CO 2 CFC, HFC, N, H 2 O, CO 2 Dimensions 200x113x62mm 280x135x75mm 280x135x75mm Weight 1060g 1200g (without batteries) 1200g (without batteries) Probes includes 1 clamp probe 2 clamp probes 1 pliers temperature probe Optional (all models) Air Probe, Waterproof Surface Probe, Pipe Wrap Probe, Clamp Probe Optional (570 model only) Oil Pressure Probe, Clamp Amp Probe, Printer TESTO 552 DIGITAL VACUUM GUAGE For the evacuation of refrigeration, air conditioning and heat pump systems. Utilizes a sensor that requires no cleaning and is not affected by contamination. Built to withstand a 6 foot drop Best-in-class accuracy Illuminated display 2400 hours of battery life Measuring cycle: 0.5 seconds Water and dust resistant (IP 42) Vacuum measuring range: mbar/ micron Vacuum resolution: 0.01 hpa / 10 micron Parameter: mmhg, Torr, mbar, hpa, micron, inh2o, inhg, Pa Connections: 2x1/4"SAE - 1x MiniDin (testo 570) TESTO 552 DIGITAL VACUUM GUAGE

8 Temperature Measurement TESTO MINI PENETRATION DIGITAL THERMOMETERS These compact immersion and penetration thermometers record temperature in air as well as in soft foods and liquids. Easy to read thanks to large display Fast and easy battery replacement Uses button cell LR44 with life of 150h in continuous use Part No Probe Length 133mm 213mm Temperature Range -50 to +150 C -50 to +250 C ±1 C (-10 to C) ±1 C (-10 to C) Accuracy ±2 C (-30 to C) ±2% of mv (+100 to C) ±2%of mv (+100 to +150 C) ±3% of mv(+200 to +250 C) Resolution 0.1 C (-19.9 to +150 C) 0.1 C (-19.9 to C) 1 C (remaining range) 1 C (remaining range) TESTO 103 FOLDING DIGITAL THERMOMETER Handy, hygienic, digital thermometer suitable for measuring food temperatures during production, storage and processing. It begins measurement from a fold-out angle of 30. After measurement, the probe can be simply folded away. The Testo 103 is compliant with HACCP and EN Measures temperature range of -30 to +220 C Accuracy.±0.5 C (-30 to C) ±1 % of mv >100 C Narrow probe tip is ideal for spot check measurements. Easy-to-clean white ABS housing with a robust probe. Meets protection class IP55. Uses 2 lithium batteries (CR2032) with a life of 300h Dimensions 189 x 35 x 19 mm (folds to 110mm long) Weight 49g TESTO 103 FOLDING DIGITAL THERMOMETER TESTO 104 WATERPROOF FOLDING DIGITAL THERMOMETER Folding thermometer that meets protection class IP65 which allows cleaning under running water and use under all conditions.it is ideally suited to core temperature measurements of foods thanks to a robust metal folding joint and a long, stable measurement probe. Model 104IR also features infrared for non-contact temperature measurement. Compliant with HACCP and EN Probe measures temperature range of -50 to +250 C Probe accuracy.±0.5 C (-30 to C), ±1 C (-50 to -30 C), ±1% of mv (>100 C) IR temperature range of -30 to +250 C IR accuracy.±2.5 C (-30.0 to C ), ±2 C (-20.0 to -0.1 C ) Model 104 ±1 C or ±1.5 % of mv remainder of the range Resolution 0.1 C ABS/TPE/Metal housing. Protection class IP65. Uses 2 batteries type AAA Dimensions x48x19mm, 104IR - 281x48x21mm Weight g, 104IR - 197g TESTO 104 WATERPROOF FOLDING THERMOMETER with folding penetration probe only TESTO 104-IR WATERPROOF INFRARED THERMOMETER combines a folding penetration probe with an infrared sensor for non-contact temperature measurement Model 104IR

9 Temperature Measurement TESTO 810 TWO CHANNEL INFRARED THERMOMETER Designed for the measurement of air temperature and simultaneous non-contact surface temperature measurement in one instrument with laser spot marking and integrated NTC air thermometer. Infrared measurement with 1-point laser spot marking and 6:1 optics. Display of differential temperature, e.g. between food and air. Hold function and min./max. values. Emissivity adjustable. Display illumination. Infrared measurement in temperature range of -30 to +300 C Infrared measurement accuracy.±2.0 C (-30 to +100 C) ±2% of mv (remaining range) NTC measurement in temperature range of -10 to +50 C NTC measurement accuracy.±0.5 C Resolution 0.1 C Uses 2 type AAA batteries with a life of 50h Dimensions 119 x 46 x 25 mm Weight 90g TESTO 810 TWO CHANNEL INFRARED THERMOMETER includes protective cap, batteries, pouch and calibration protocol TESTO 108 WATERPROOF DIGITAL THERMOMETER Designed to spot-check the precise temperature of foodstuffs to monitor and guarantee the quality of food products whether in the transportation and storage of foodstuffs, in restaurants, in large kitchens or in chain restaurants. The testo allows temperature measurement to be integrated into daily work routines with no added complications, helping the user comply with HACCP requirements and certified according to EN Two self-explanatory buttons for easy application even by frequently changing staff. Easy readout of measurement value with large display. Instrument and probe waterproof to IP67. Conforms to HACCP and EN Measurement rate of 2 temperature readings per second supplied with type T probe (Cu-CuNi)with the ability to connect optional type K probes (NiCr-Ni) supplied with a screw-in and lockable type T probe for secure attachment. Measures temperature range of -50 to +300 C Accuracy of Instrument.±0.5 C (-30 to +70 C) ±0.5 C ±0.5 % of m.v. (remaining range) Accuracy of Probe.±0.5 C (-40 to -20 C) ±0.2 C (-20 to +70 C) ±0.5 C (+70 to +125 C) ±0.4 % of m.v. (+125 to +300 C) Resolution 0.1 C Uses 3 type AAA batteries with a life of 2500 h (typical, at 23 C) Dimensions 140 x 60 x 24.5 mm Weight 150g Testo with screw-in and lockable type T probe with auto-hold, hold and min/max functions TESTO THERMOMETER WITH PROBE supplied with standard temperature probe Type T and soft case TESTO THERMOMETER WITH LOCKABLE PROBE supplied with lockable temperature probe Type T and soft case Testo with standard probe connection

10 Temperature Measurement TESTO 925 SINGLE CHANNEL THERMOMETER One channel temperature measuring instrument for connection to fast-action thermocouple probes. Audible alarm sounds if limit values are exceeded. Current measurement data as well as max/min data can be printed to optional printer. Wide range of optional probes including a radio probe. K probe measures temperature range of -50 to C K probe accuracy.±(0.5 C +0.3% of mv) (-40 to +900 C) remaining range ±(0.7 C +0.5% of mv) Resolution 0.1 C (-50 to C) 1 C >200 C. Continuous display of max/min values Hold button to freeze reading. Audible alarm sounds when limit values are exceeded Uses 9V block battery 6F22 with a life of 200h (connected probe/backlight off) Dimensions 182x64x40mm Weight 171g TESTO 925 SINGLE CHANNEL THERMOMETER TESTO 922 TWO CHANNEL DIFFERENTIAL THERMOMETER Two channel temperature measuring instrument for connection to fast-action thermocouple probes. Audible alarm sounds if limit values are exceeded. Current measurement data as well as max/min data can be printed to optional printer. Wide range of optional probes including a radio probe. K probe measures temperature range of -50 to C K probe accuracy.±(0.5 C +0.3% of mv) (-40 to +900 C) remaining range ±(0.7 C +0.5% of mv) Resolution 0.1 C (-50 to C) 1 C >200 C. Continuous display of max/min values Hold button to freeze reading. Audible alarm sounds when limit values are exceeded Uses 9V block battery 6F22 with a life of 200h (connected probe/backlight off) Dimensions 182x64x40mm Weight 171g TESTO 922 TWO CHANNEL DIFFERENTIAL THERMOMETER TESTO PROBES FOR TEMPERATURE MEASUREMENT Probe Dims Cable Temperature Accuracy t99 dia x length length Range C T/C TYPE K AIR PROBE 4mm x 115mm fixed 1.2m -60 to +400 C Class 2 25s T/C TYPE K IMMERSION PROBE 1.5mm x 300mm fixed 1.2m -60 to C Class 1 2s T/C TYPE K IMMERSION TIP PROBE 5mm x 114mm fixed 1.2m -60 to +400 C Class 2 7s T/C TYPE K PADDLE SURFACE PROBE 8mm x 145mm fixed 1.2m 0 to +300 C Class 2 5s T/C TYPE K SPRUNG STRIP SURFACE PROBE 5mm x 115mm fixed 1.2m -60 to +300 C Class 2 3s short term to +500 C T/C TYPE K WIDE TIP SURFACE PROBE 5mm x 115mm fixed 1.2m -60 to +400 C Class 2 30s T/C TYPE K ST ST FOOD PROBE 4mm x 125mm fixed 1.2m -60 to +400 C Class 2 7s T/C TYPE K ST ST FOOD PROBE WITH HANDLE 5mm x 115mm fixed 1.2m -60 to +400 C Class 1 15s T/C TYPE K COOKING OIL IMMERSION PROBE 4mm x 240mm fixed 1.2m -50 to +230 C Class 1 15s THERMOCOUPLE WITH TC ADAPTER TYPE K 1.5mm x 800mm -50 to +400 C Class 2 5s THERMOCOUPLE WITH TC ADAPTER TYPE K 1.5mm x 1500mm -50 to +400 C Class 2 5s

11 Digital Refrigeration Technology TESTO 830-T1 INFRARED TEMPERATURE MEASUREMENT For non-contact measurement of surface temperatures with 1 point laser sighting, adjustable limit values and alarm function. 1-point laser marking, 10:1 optics Laser measurement point marker and large optics for exact measurement even at greater distances Fast recording of measurement values at two measurements per second Adjustable emissivity Two adjustable alarm limit values Hold function and display of min/max values Infrared temperature range -30 to +400 C Infrared accuracy ±1.5 C or 1.5 % of mv (+0.1 to +400 C) ±2 C or ±2 % of mv (-30 to 0 C) Resolution 0.1 C 9V block battery with typical life of 15h Dimensions 190 x 75 x 38 mm Weight 200g TESTO 830-T1 INFRARED TEMPERATURE MEASUREMENT includes batteries and calibration certificate TESTO 830-T2 INFRARED TEMPERATURE MEASUREMENT For non-contact temperature measurement with 2 point laser sighting and ability to connected to optional type K probes. Features as 830-T1 plus: 2-point laser marking, 12:1 optics Infrared temperature range/resolution as 830-T1 Type K probe temperature range --50 to +500 C Type K probe accuracy ±0.5 C +0.5% of mv Resolution 0.1 C TESTO 830-T2 INFRARED TEMPERATURE MEASUREMENT includes batteries and calibration certificate TESTO 835-T1 INFRARED TEMPERATURE MEASUREMENT For 4 point laser sighting infra red non-contact temperature measurement of smaller objects from a medium distance or from optional type K probes 4-point laser marking, 50:1 focused optics (5m distance = 10cm measurement spot) Permanent sensor check for fast and safe work Convenient menu guidance with icons and joystick Save measurement data on-site and subsequently analyse it via PC Infrared probe temperature range -30 to +600 C Infrared accuracy ±2.5 C (-30.0 to C ) / ±1.5 C (-20.0 to -0.1 C ) ±1.0 C (+0.0 to C ) / ±1% of mv (remaining range) Type K probe temperature range -50 to +600 C Type K probe accuracy ±(-0.5 C +0.5% of mv) Resolution 0.1 C 3 batteries type AA with life of 10h (typical 25 C without backlight) Dimensions 193 x 166 x 63mm Weight 514g TESTO 835-T1 INFRARED TEMPERATURE MEASUREMENT includes batteries and calibration protocol

12 Thermal Imaging TESTO 870 THERMAL IMAGER Carry out damage-free tests on equipment to visualize hot spots detect leakages, localizing cold bridges or visualizing overheated connections and reduce energy loss. The Testo 870 features a large display, high-quality detector, wide field of view and uncomplicated operation. Infrared Image Output Infrared resolution 160 x 120 (19200) pixels Geometric resolution (IFOV) 3.68 mrad Optional SuperResolution technology to 320 x 240 pixel/2.3 mrad (IFOV) Output image size 3.1 MP Thermal sensitivity <100 mk at +30 C 34 x 26 field of view with <0.5 m minimum focus distance (fixed focus) Image refresh rate of 9 Hz Spectral range 7.5 to 14 μm Image Presentation Image display 3.5" LCD with 320 x 240 pixels Display options IR image only with 870-1, IR image/real image Colour palettes 4 (iron, rainbow, cold-hot, grey) Measuring range -20 to +280 C Accuracy ±2 C, ±2 % of m.v. Emissivity 0.01 to 1 Analysis Function Centre point measurement, hot/cold spot measurement Imager Equipment Integral digital camera with model Image Storage File formats.bmt and.jpg; export options in.bmp,.jpg,.png,.csv,.xls Memory 1.6 GB / >2000 images internal storage Power Supply Li-ion rechargeable battery with 4 hour run time & mains operation Ambient Conditions Operating temperature range -15 to +50 C Storage temperature range -30 to +60 C Housing protection class (IEC 60529) IP54 Vibration (IEC ) 2G Air humidity 20 to 80 %RH non-condensing PC Software Windows XP (Service Pack 3), Windows Vista, Windows 7. Windows 8 Interface USB 2.0 Physical specifications Dimensions 219 x 96 x 95 mm Weight 550g approx TESTO THERMAL IMAGER supplied in padded soft case including pro software, USB cable, mains unit, and Li ion rechargeable battery TESTO THERMAL IMAGING CAMERA supplied in moulded hard case including pro software, USB cable, mains unit, and Li ion rechargeable battery Optional Extra Testo is supplied in a high quality, padded travel bag Testo is supplied in a moulded case SUPER RESOLUTION (Four times more measurement values) Unit 1 Swaffield Park, Hyssop Close, Hawks Green, Cannock, Staffs WS11 7FU tel: fax: enquiries@firstchoice-cs.co.uk web: