AreaRAE Plus. Visibility on more threats than ever - all in one flexible area detector with remote monitoring

Transcription

1

2 AreaRAE Plus Visibility on more threats than ever - all in one flexible area detector with remote monitoring AreaRAE Plus is a wireless, transportable area monitor that can simultaneously detect toxic and combustible gases, volatile organic chemicals, and meteorological factors that affect the speed and direction of the gas. Whether you need to protect your community by monitoring a fence line, protect your employees during a maintenance turnaround, or protect your fire and hazmat team during emergency response, the AreaRAE Plus alerts you to threats with local audible and visual alarms. Plus, it works with Honeywell s remote monitoring software to give you a real-time view of threat readings from a safe location. AreaRAE Plus delivers flexibility for your changing requirements: Up to six 4R+ sensors for toxic and combustible gas. Choose from a mix of up to 20 sensors based on your needs and switch them out whenever your needs change. 7R+ photoionization detector. Monitor VOCs in parts per million, with built-in compensation for temperature and humidity. Optional meteorological sensor for tracking toxic plumes. Honeywell s compact RAEMet sensor sits at the top of the AreaRAE Plus and measures wind speed, wind direction, temperature and humidity. This information is then modeled in Honeywell s real time monitoring software which integrates the ALOHA hazard monitoring program. Applications Industrial emergency response teams Maintenance turnarounds / Shutdowns Fence line monitoring Clearing a confined space for entry Wastewater pipeline rehabilitation Site remediation Fumigation, excavation and other environmental liabilities Ease & Flexibility Available in Rapid Deployment Kit for quick threat assessment User-friendly interface; turn it on and go Flexible power options for short and long-term deployments Easy to hear and see, with 108-decibel alarm Easy USB connection to configuration software Built-in Mesh modem for short range comminution with RAE Systems wireless portable detectors. Device Management with Honeywell Sotera Remote Visibility on Threats Delivers real-time readings to Honeywell s remote monitoring software, so you can instantly determine the location and severity of a threat Map-based display is accessible from any computer with an internet connection or from our laptop as a turnkey host Enables coordination and data sharing in joint operations

3 Specifications DIMENSIONS WEIGHT GAS SENSORS SLOTS ADDITIONAL SENSOR GPS BATTERY OPERATING HOURS DISPLAY KEYPADS ALARMS DATA LOGGING DATA STORAGE DATA INTERVAL WIRELESS 1 COMMUNICATION SAFETY CERTIFICATION SAMPLING PUMP TEMPERATURE HUMIDITY INGRESS PROTECTION (IP) IP 65 PERFORMANCE TESTS WARRANTY x 306 x 166 mm (with rubber boot) x x 6.53 (with rubber boot) 6.3 kg (13.88 lb) full option configuration 6.5 kg ( lb) full option configuration (+RAEMet) up to 7; see Sensor list RAEMet (Wind Speed, Wind Direction, Temperature & Humidity) Standard equipment in every unit Rechargeable 7.2 V / 10 Ah Li-ion battery pack with built-in charger Alkaline Battery Adapter ~20 hours with wireless connectivity on Li-ion battery pack Specification at room temperature (20 C) Large 240 x 320 pixel LCD backlit display 64 x 85 mm / 2.5 x operation and programming keys Multi-tone 108 db 3.3 ft / 1 m, Bright LED 360 degree view and on-screen indication of alarm conditions Additional diagnostic alarm and display message for low battery Wireless connectivity alarm Continuous data logging (90 days for 7 gas sensors, 1 Gamma sensor, 1 RAEMet (wind speed & direction, temp and RH), and GPS at 1 min intervals, 24/7) 24M bytes (memory full action: stop when full or Wrap around) User-configurable from 1 to 3,600 sec Standard Bluetooth Low Energy module (BT4.0) and GPS Primary radio module: - Long range ISM License Free 900 MHz or 2.4 GHz radio - IEEE b/g Wi-Fi Secondary radio module: Short range IEEE MHz or 868MHz Mesh Radio Wireless range 3 : Up to 2 miles (3 km) for ISM 900 MHz; Up to 1.2 miles (2 km) for ISM 2.4 GHz; Up to 330 ft (100m) for Wi-Fi; Up to 660 ft (200m) for Mesh secondary radio; Up to 15 ft (5m) for BLE. Wireless Approval: FCC Part 15, CE R&TTE, Others 4 Communicates to ProRAE Studio II via USB cable to PC; Wireless data and alarm status transmission via Wi-Fi or ISM modem; Act as gateway to connect up to 8 remote instruments (using secondary radio module) US / Canada: Class 1, Division 2 Groups A, B, C, D Built-in pump, typical flow rate 450 cc/min -20 C to +50 C / (- 4 F to +122 F) 0% to 95% relative humidity (non-condensing) MIL-STD-810G and 461F LEL CSA C2.2No. 152, ISA Four years for O2 Liquid Oxygen sensors Three years for CO, and H2S sensors Two years for non-consumable components, catalytic LEL sensor and 10.6eV 7R+ PID lamp One year on all other sensors, battery, and other consumable parts Six months for 9.8eV lamp PID sensor RAEMet SPECIFICATIONS (Optional) WIND SPEED WIND DIRECTION TEMPERATURE HUMIDITY SENSOR RANGE RESOLUTION PID SENSORS Range: 0 to 20 m/s (0 to 44 mph) Start Speed: 0.1 m/s (0.22 mph) Range: 360 (No dead band) -20 C to 60 C (-4 F to 140 F) Resolution 0.1 C (1.8 F) 10 to 95% RH Resolution 1% RH COMPASS Resolution 1 POWER Supported Sensors Power supplied by the AreaRAE Plus 1 Additional equipment and/or software licenses may be required to enable remote wireless monitoring and alarm transmission 2 Against factory defects 3 Receiving > 80% 4 Contact RAE Systems for country specific wireless approvals and certificates Specifications are subject to change 7R+; 10.6 ev ppm 0 to 2,000 ppm 0.1 ppm 4R+; 9.8 ev* 0 to 2,000 ppm 0.1 ppm COMBUSTIBLE SENSOR CATALYTIC BEAD SENSOR 0 to 100% LEL 1% LEL NDIR SENSOR Carbone Dioxide (CO 2 ) 0 to 50,000 ppm 100 ppm ELECTROCHEMICAL SENSORS AMMONIA (NH 3 ) 0 to 100 ppm 1 ppm CARBON MONOXIDE (CO) 0 to 500 ppm 1 ppm CARBON MONOXIDE EXT. (CO HR) 0 to 2,000 ppm 10 ppm CARBON MONOXIDE H 2 Comp (CO H 2 Comp) 0 to 2,000 ppm 10 ppm CHLORINE (Cl 2 ) 0 to 50 ppm 0.1 ppm CHLORINE DIOXIDE (ClO 2 ) 0 to 1 ppm 0.03 ppm ETHYLENE OXIDE (ETO-A) 0 to 100 ppm 0.5 ppm ETHYLENE OXIDE (ETO-B) 0 to 10 ppm 0.1 ppm ETHYLENE OXIDE (ETO-C) 0 to 500 ppm 10 ppm HYDROGEN (H 2 ) 0 to 2,000 ppm 10 ppm HYDROGEN CHLORIDE (HCl) 0 to 15 ppm 1 ppm HYDROGEN CYANIDE (HCN) 0 to 50 ppm 0.5 ppm HYDROGEN FLUORIDE (HF) 0.5 to 10 ppm 0.1 ppm HYDROGEN SULFIDE (H 2 S) 0 to 100 ppm 0.1 ppm HYDROGEN SULFIDE EXT. (H 2 S HR) 0 to 1,000 ppm 1 ppm OXYGEN (O 2 ) 0 to 30 % 0.10 % SULFUR DIOXIDE (SO 2 ) 0 to 20 ppm 0.1 ppm NITRIC OXIDE (NO) 0 to 250 ppm 0.5 ppm NITROGEN DIOXIDE (NO 2 ) 0 to 20 ppm 0.1 ppm PHOSPHINE (PH 3 ) 0 to 20 ppm 0.1 ppm

4 AreaRAE Pro Remote visibility on more threats than ever for a new level of real-time situational awareness AreaRAE Pro is a wireless, transportable area monitor that can simultaneously detect toxic and combustible gases, volatile organic compounds, radiation and meteorological factors. Whether you re carrying it into a hazmat response, setting up perimeter at a fire or protecting a public venue, the AreaRAE Pro works with Honeywell s remote monitoring software to give you a real-time view of threat readings so you can make real time decisions to ensure the safety of your teams and the general public. AreaRAE Pro delivers maximum flexibility and versatility in one device: Up to six 4R+ sensors for toxic and combustible gas. AreaRAE Pro offers more than 20 interchangeable sensors that can be swapped at a moments notice to meet the changing needs of first responders. 7R+ photoionization detector. Monitor VOCs in parts per billion, with built-in compensation for temperature and humidity. Meteorological station for tracking toxic plumes. Honeywell s compact RAEMet sensor sits at the top of the AreaRAE Pro and measures wind speed, wind direction, temperature and humidity. This information is then modeled in Honeywell s real time monitoring software which integrates the ALOHA hazard monitoring program. Optional gamma sensor for radiation detection. Detect and measure gamma radiation with increased sensitivity and faster response without using an additional sensor slot. Applications First responders Hazmat Civil Defense & Military Public Venue Protection Ease and Fexibility Available in Rapid Deployment Kit for quick threat assessment User-friendly interface; turn it on and go Supports long-distance remote monitoring Built-in mesh modem for short-range monitoring no external router required Flexible power options for shortand long-term deployments Easy to hear and see, with 108-decibel alarm Easy USB connection to configuration software Device Management with Honeywell Sotera Remote Visibility on Threats Delivers real-time readings to Honeywell s remote monitoring software, so you can instantly determine the location and severity of a threat Map-based display is accessible from any computer with an internet connection or from our laptop as a turnkey host Enables coordination and data sharing in joint operations

5 Specifications DIMENSIONS WEIGHT GAS SENSORS SLOTS ADDITIONAL SENSORS GPS BATTERY OPERATING HOURS DISPLAY KEYPADS ALARMS DATA LOGGING DATA STORAGE DATA INTERVAL WIRELESS 1 COMMUNICATION SAFETY CERTIFICATION SAMPLING PUMP TEMPERATURE HUMIDITY INGRESS PROTECTION (IP) IP 65 PERFORMANCE TESTS WARRANTY x 306 x 166 mm (with rubber boot) x x 6.53 (with rubber boot) 6.3 kg (13.88 lb) full option configuration 6.5 kg ( lb) full option configuration (+RAEMet) up to 7; see Sensor list Gamma; RAEMet (Wind Speed, Wind Direction, Temperature & Humidity) Standard equipment in every unit Rechargeable 7.2 V / 10 Ah Li-ion battery pack with built-in charger Alkaline Battery Adapter ~20 hours with wireless connectivity on Li-ion battery pack ~12 hours with wireless connectivity on Alkaline battery adapter Specification at room temperature (20 C) Large 240 x 320 pixel LCD backlit display 64 x 85 mm / 2.5 x operation and programming keys Multi-tone 108 db 3.3 ft / 1 m, Bright LED 360 degree view and on-screen indication of alarm conditions Additional diagnostic alarm and display message for low battery Wireless connectivity alarm Continuous data logging (90 days for 7 gas sensors, 1 Gamma sensor, 1 RAEMet (wind speed & direction, temp and RH), and GPS at 1 min intervals, 24/7) 24M bytes (memory full action: stop when full or Wrap around) User-configurable from 1 to 3,600 sec Bluetooth Low Energy module (BT4.0) and GPS Primary radio module: - Long range ISM License Free 900 MHz or 2.4 GHz radio - IEEE b/g Wi-Fi Secondary radio module: Short Range IEEE MHz or 868 MHz Mesh Radio Wireless range 3 : Up to 2 miles (3 km) for ISM 900 MHz; Up to 1.2 miles (2 km) for ISM 2.4 GHz; Up to 330 ft (100m) for Wi-Fi; Up to 660 ft (200m) for Mesh secondary radio; Up to 15 ft (5m) for BLE. Wireless Approval: FCC Part 15, CE R&TTE, Others 4 Communicates to ProRAE Studio II via USB cable to PC; Wireless data and alarm status transmission via Wi-Fi or ISM modem; Act as gateway to connect up to 8 remote instruments (using secondary radio module) US / Canada: Class 1, Division 2 Groups A, B, C, D Built-in pump, typical flow rate 450 cc/min -20 C to +50 C / (- 4 F to +122 F) 0% to 95% relative humidity (non-condensing) MIL-STD-810G and 461F LEL CSA C22.2No. 152, ISA Four years for O2 Liquid Oxygen sensors Three years for CO, and H2S sensors Two years for non-consumable components, catalytic LEL sensor and 10.6eV 7R+ PID lamp One year on all other sensors, battery, and other consumable parts Six months for 9.8eV lamp PID sensor RAEMet SPECIFICATIONS WIND SPEED WIND DIRECTION TEMPERATURE HUMIDITY 1 Additional equipment and/or software licenses may be required to enable remote wireless monitoring and alarm transmission 2 Against factory defects 3 Receiving > 80% 4 Contact RAE Systems for country specific wireless approvals and certificates Specifications are subject to change Supported Sensors Range: 0 to 20 m/s (0 to 44 mph) Start Speed: 0.1 m/s (0.22 mph) Range: 360 (No dead band) - 20 C to 60 C (-4 F to 140 F) Resolution 0.1 C (1.8 F) 10 to 95% RH Resolution 1% RH COMPASS Resolution 1 POWER Power supplied by the AreaRAE Pro SENSOR RANGE RESOLUTION PID SENSORS 4R+; 10.6eV ppb 0 to 2,000 ppm 10 ppb 7R+; 10.6 ev ppb 0 to 2,000 ppm 10 ppb 4R+; 9.8 ev* 0 to 2,000 ppm 0.1 ppm COMBUSTIBLE SENSOR CATALYTIC BEAD SENSOR 0 to 100% LEL 1% LEL NDIR SENSOR CARBONE DIOXIDE (CO 2 ) 0 to 50,000 ppm 100 ppm ELECTROCHEMICAL SENSORS AMMONIA (NH 3 ) 0 to 100 ppm 1 ppm CARBON MONOXIDE (CO) 0 to 500 ppm 1 ppm CARBON MONOXIDE EXT. (CO HR) 0 to 2,000 ppm 10 ppm CARBON MONOXIDE H 2 Comp (CO H 2 Comp) 0 to 2,000 ppm 10 ppm CHLORINE (Cl 2 ) 0 to 50 ppm 0.1 ppm CHLORINE DIOXIDE (ClO 2 ) 0 to 1 ppm 0.03 ppm ETHYLENE OXIDE (ETO-A) 0 to 100 ppm 0.5 ppm ETHYLENE OXIDE (ETO-B) 0 to 10 ppm 0.1 ppm ETHYLENE OXIDE (ETO-C) 0 to 500 ppm 10 ppm HYDROGEN (H 2 ) 0 to 2,000 ppm 10 ppm HYDROGEN CHLORIDE (HCl) 0 to 15 ppm 1 ppm HYDROGEN CYANIDE (HCN) 0 to 50 ppm 0.5 ppm HYDROGEN FLUORIDE (HF) 0.5 to 10 ppm 0.1 ppm HYDROGEN SULFIDE (H 2 S) 0 to 100 ppm 0.1 ppm HYDROGEN SULFIDE EXT. (H 2 S HR) 0 to 1,000 ppm 1 ppm OXYGEN (O 2 ) 0 to 30 % 0.10 % SULFUR DIOXIDE (SO 2 ) 0 to 20 ppm 0.1 ppm NITRIC OXIDE (NO) 0 to 250 ppm 0.5 ppm NITROGEN DIOXIDE (NO 2 ) 0 to 20 ppm 0.1 ppm PHOSPHINE (PH 3 ) 0 to 20 ppm 0.1 ppm GAMMA RADIATION SENSOR GAMMA I-SENSOR 0.01 μsv/h to 0.2 msv/h (1 μrem/h to 0.02 rem/h) 50 kev to 3 MeV

6 RDK Detector Kit AREARAE Monitors: Pro (Model PGM-6560X) Plus (Model PGM-6520X) The Rapid Deployment Kit (RDK) Detector Package includes 4 versatile GPS-enabled AREARAE Pro or AREARAE Plus monitors, each with up to 7 sensors and RAEmets. With The RDK,you have everything you need to create a perimeter and set up a command station up to two miles from the site. It all fits into a military-grade protective case, which chargesall the batteries during storage. The wireless network can scale up to 64 monitors, and the host controller can push the data in real time to any location via an Internetconnection, for situational awareness in minutes. RDK Detector Kit Includes: 1 Pelican case with precut foam, embedded charing systems for 4 AREARAE and lead organizer for Accessories storage/ transportation equipped with: 4 AREARAE Plus monitors with sensors, battery and wireless options as specified, and protective rubber boot and filter(s) installed Power Adapter, AC/DC, V Input, 12 VDC/7.5 A 90 W Output Power cord, AC, 125 V, 10 A, US Plug, 1.8 m Power cord, AC, 125 V, 10 A, UK plug, 1.8 m Power cord, AC, 125 V, 10 A, EU Plug, 1.8 m 1 One to Five charging cable 4 External Battery Chargers 4 additional rechargeable Batteries 1 PC communication cable 1 Calibration adapter 1 Screw Driver, Slotted 1 Screw Driver, Phillips #6 1 Tool kit for 7R+ PID sensor 1 Opening Tool kit for 4R+ PID sensor 1 PID Lamp Cleaning kit (isopropanol) 10 spare external filters 1 SensorRAE 4R+ 1 RAELink3 4 ProRAE Guardian Licenses - Tier 3 Concurrent Instruments Quick Start Guide CD with documentation RDK Accessory List (laminated card) ProRAE Studio II Instrument Configuration & Data Management Software Calibration and test certificate Warranty / registration card RDK Pro RDK Plus

7 ProRAE Guardian Mobile Command Center and Device Fleet Manager All your data. Right here. Right now. ProRAE Guardian is real-time gas, radiation, dust, weather, and physiological monitoring software that connects, integrates, and relays data from various wireless monitors to a centralized system. The command center instantly displays device status, alarm, and sensor reading information, integrating all information in a single dynamic view. ProRAE Guardian real-time monitoring empowers safety professionals with instant updates of monitor data for making intelligent time critical decisions. ProRAE Guardian advanced device management enables operational managers to manage their fleets of monitors and track worker device assignments. In addition, it can automate several common tasks to improve worker productivity along with the flexibility to define custom alerts specific to a work environment. Centralized monitoring of wide areas Simultaneous monitor data aggregation Increased situational awareness 24/7 monitoring of exposure conditions Early warning and tracking of hazardous threats Distributed Control Systems integration for process automation Management and control of monitors and detectors Increased productivity through task automation Lower deployment costs Key Features Real-time display of device status, sensor readings, and alarms Integrated Google Maps show precise instrument locations with alarm status Datalogging in text and graphical formats, and includes boolean filters Supports all RAE Systems wireless enabled products Supports up to 512 instruments simultaneously Dashboard for overall system status Fleet management for instruments Activity automation for calibration, bump test and report generation Custom rules for alarm notifications Remote notifications via and text messages Worker-instrument association Security features for data protection and networking Leasing option for short duration projects Software Development Kit for integration with external systems ProRAE Guardian helps incident command establish a perimeter, track and identify the real-time concentration of toxic chemicals, combustible materials, radiation, and plumes to protect responders and the community.

8 ProRAE Guardian Mobile Command Center and Device Fleet Manager Specifications Minimum Hardware Requirements * CPU Pentium-class, 1.0GHz or better Display VGA (1024 x 768 min., 16-bit color) Hard Drive 300MB of free hard disk space Memory 3.0GB or higher for 500 instruments and 30 remote viewer sessions Optical Drive CD-ROM Drive for installation Serial Port Available serial port for each device/modem installed Sound Card To enable local sounds and alarms Internet Connection Required for Google Maps, , SMS, and RAECenter Software installation only. ProRAE Guardian may require significantly more disk space to store device datalog information. Minimum Software Requirements * Internet Browser Internet Explorer 9 or higher, Google Chrome, or Safari for remote viewing Operating System Microsoft Windows Vista, Windows 7, or Windows 8 Documentation Adobe Acrobat Reader v6.0 or higher to view documentation *Specifications subject to change without notice Typical Configurations ProRAE Guardian comes pre-installed and pre-configured in most RAE Systems Rapid Deployment Kit (RDK) System Packages. In addition, ProRAE Guardian can be ordered separately and installed on a compatible Windows PC. The software fully integrates with RAE Systems GPS Module V2.2, which supports either Tiger maps or optional MXD maps. ProRAE Guardian Ordering All RDK System Packages include a PC with ProRAE Guardian installed and pre-configured, instruments, hardware, cables, and all necessary ProRAE Guardian instrument licenses for real-time monitoring. Alternatively, ProRAE Guardian can be ordered as a separate product. In this case, additional licenses must be ordered for instrument types intended to be monitored. Call a RAE Systems sales representative for more information on license options. ProRAE Guardian on remote PC AreaRAE Stadium AreaRAE Ordering Information Description ProRAE Guardian CD Only ProRAE Guardian CD + Printed Manual Part Numbers S01-A S01-A Ethernet ProRAE Guardian on remote PC AreaRAE Intranet Ethernet ProRAE Guardian on PC Internet Ethernet Serial RAELink3 AreaRAE ProRAE Guardian Tier 1 Concurrent Instruments License ProRAE Guardian Tier 2 Concurrent Instruments License ProRAE Guardian Tier 3 Concurrent Instruments License ProRAE Guardian Real-time Monitoring Tier 3 Yearly Subscription License ProRAE Guardian Real-time Monitoring Tier 2 Yearly Subscription License ProRAE Guardian Real-time Monitoring Tier 1 Yearly Subscription License ProRAE Guardian Care Center Tier 3 Yearly Subscription License S S S S S S S ProRAE Guardian Care Center Tier 2 Yearly Subscription License S Example of ProRAE Guardian deployment ProRAE Guardian Care Center Tier 1 Yearly Subscription License S RDK System Package Call for Configuration Corporate Headquarters RAE Systems by Honeywell 3775 North First Street San Jose, CA USA RAE-InsideSales@honeywell.com DS Worldwide Sales Offices USA/Canada Europe / Middle East China Asia Pacific

9 RAELink3 Wireless Modem with Integrated Global Positioning System The RAELink3 modem allows integration of many RAE Systems gas and radiation monitors, and select third-party devices into a wireless detection system. Monitors linked with a RAELink3 modem can communicate sensor data and GPS coordinates to a command center s PC running ProRAE Guardian software up to 2 miles (3 km) away. Bluetooth connectivity, a user-friendly display and easy-to-use menu simplify the configuration and use of the RAELink3. View and track sensors and responders downrange Deploy quickly and easily Merge multiple detection technologies on one viewing platform Integrate two devices with one RAELink3 using Bluetooth and a serial cable Key Features Integrated GPS equipped for tracking and viewing sensors and personnel on a local mapping area Bluetooth-equipped for wireless connection option to monitors Long-range radio to transmit system information up to 2 miles (3 km) in urban setting Versatile Easily configure in the field to interface with other ProRAE Guardian networked monitors Programmable as a Host modem, to Repeater, to Remote modem as needed Easy to Use Backlit display with intuitive interface Radio strength indicator on LCD Durable Weatherproof Shock resistant Up to 18 hours run time on single charge Applications Incident Response Venue Protection Industrial Safety Perimeter Monitoring Confined Space Entry Pulp and Paper Industry Plant Turnarounds Marine and Offshore Wells UltraRAE 3000 with RAELink3 used for screening potentially hazardous leaks

10 RAELink3 Wireless Modem with Integrated Global Positioning System Specifications Size 4.73" L x 3.4" W x 1.85" H (12cm x 8.65cm x 4.7cm) without antenna Weight 17.3 oz (490 g) Battery Rechargeable, 7.4V/1650mAh, Lithium-ion external battery pack with charging station (6 hour charging time), and alkaline adapter (5 x AA) External Power Supply 12VDC 500mA Operating Hours Up to 18 hours continuous operation on a charge Operating Temperature -4 to 131 F (-20 to +55 C) Humidity 0% to 95% relative humidity (non-condensing) IP Rating IP-65 GPS Accuracy Within 5 meters Peak RF Power 1 watt (+30dBm) Range Up to 2 miles (3 km) Interface RS-232 or Bluetooth 2.0 Keypad Three operation and programming keys Display LCD, 128 X 64 Safety Certifications Class I, Division 2 Groups A, B, C, D T4 Wireless Frequency ISM license free band ( MHz) Wireless Approvals FCC Part 15, Others 1 Radio Module Supports RM900A, BTM431 1 Contact RAE Systems for country specific wireless approvals and certificates. Specifications are subject to change. ProRAE Guardian RAELink3 Communication Kits RAELink3 Communication Kit enables communication between a variety of RAE Systems wireless monitors and ProRAE Guardian. Custom RAELink3 Communication Kits are also available for select third-party devices. Check the RAE Systems web site for the latest listing of compatible third-party devices. RAE Systems-Compatible Monitors GammaRAE II R Personal Radiation Detector MiniRAE 3000, ppbrae 3000 and UltraRAE 3000 Photoionization Detectors AreaRAE Steel RAELink3 Communication Kit Includes: RAELink3 modem equipped with GPS, Bluetooth, and long-range radio Rugged antenna Charging adapter and AC/DC adapter alkaline battery pack Hard transport case Quick reference guide and resource CD RS-232 cable (for connection to devices not equipped with Bluetooth) Ordering Information Part Numbers BioHarness RAELink3 Modem ( MHz, Bluetooth) Contact RAE Systems for other frequency options. AreaRAE Steel RAELink3 MiniRAE 3000 GammaRAE II R DustTrak II WeatherPak Corporate Headquarters RAE Systems by Honeywell 3775 North First Street San Jose, CA USA RAE-InsideSales@honeywell.com DS Worldwide Sales Offices USA/Canada Europe / Middle East China Asia Pacific

11 Colorimetric Gas Detection Tubes & Pump On-the-spot, compound-specific measurement of gases and vapors RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements. Quick, accurate, low-cost measurements Easy to read, with sharp, clear color change No calibration needed Key Features Colorimetric Tubes (See Colorimetric Tubes Part Numbers on back page) Wide assortment of tubes available to detect over 300 gases and vapors Easy to use, even in multiple layers of gloves Easy-to-read with sharp, clear color change No calibration or other maintenance required Hand Pump (LP-1200) (Piston Hand Pump Kit Part Number: ) Ergonomic, durable hand pump Solid metal construction with lifetime warranty Springless piston design accurately draws 50 and 100 cc volumes Applications Oil and gas Chemicals and petrochemicals Agriculture and pest control Food and beverage production Environmental protection Fire service HazMat response National security First responder uses RAE Systems colorimetric tubes and hand pump to measure VOC levels inside a barrel. ISO 9001 CERTIFIED

12 Colorimetric Gas Detection Tubes & Pump On-the-spot, compound-specific measurement of gases and vapors Specifications Type Part Number Standard Range Extended Range Acetone to 2% 0.05 to 4% Amines to 10 ppmv 0.25 to 20 ppmv Ammonia to 30 ppmv 0.5 to 60 ppmv to 100 ppmv 2.5 to 200 ppmv to 260 ppmv 5 to 520 ppmv to 500 ppmv 12 to 1000 ppmv to 15% 0.5 to 30% Benzene * 0.5 to 10 ppmv selective * 5 to 40 ppmv selective 0.25 to 30 ppmv 25 to 200 ppmv to 100 ppmv 2.5 to 200 ppmv Butadiene to 5 ppmv 0.25 to 10 ppmv n-butane to 1400 ppmv 12.5 to 2800 ppmv Carbon Dioxide to 5000 ppmv 150 to 10,000 ppmv to 1% to 2% to 3% to 6% to 20% 0.5 to 10% to 40% 1.25 to 20% Carbon Monoxide to 100 ppmv selective 2.5 to 300 ppmv to 100 ppmv 2.5 to 200 ppmv to 500 ppmv 10 to 1000 ppmv to 4% 0.4 to 8% Chlorine to 8 ppmv 0.25 to 16 ppmv to 100 ppmv 2.5 to 200 ppmv Chlorine Dioxide to 15 ppmv 0.05 to 30 ppmv Diesel & Jet Fuel to 25 ppmv N/A Ethanol to 2000 ppmv 50 to 2000 ppmv Formaldehyde to 5 ppmv 0.1 to 40 ppmv Gasoline to 1000 ppmv 15 to 2000 ppmv Hydrocarbons to 1000 ppmv 25 to 2000 ppmv Hydrogen Chloride to 20 ppmv 0.5 to 40 ppmv * 1 to 20 ppmv w/ desiccant 0.5 to 40 ppmv to 500 ppmv 10 to 1000 ppmv Hydrogen Cyanide to 60 ppmv 1.25 to 120 ppmv Hydrogen Fluoride to 20 ppmv 0.25 to 40 ppmv Type Part Number Standard Range Extended Range Hydrogen Sulfide to 3 ppmv 0.1 to 6 ppmv * 0.2 to 3 ppmv w/ desiccant 0.1 to 6 ppmv to 7 ppmv 0.25 to 7 ppmv to 60 ppmv 1.25 to 120 ppmv to 120ppmv 5 to 240ppmv to 120 ppmv 5 to 240 ppmv to 250 ppmv 12.5 to 500 ppmv to 800 ppmv 25 to 1600 ppmv to 2000 ppmv 50 to 4000 ppmv to 2% 0.05 to 4% to 40% 0.5 to 20% MEK to 0.6 % 0.01 to 1.8 % Mercaptans to 120 ppmv 2.5 to 240 ppmv Methyl Bromide to 18 ppmv 0.5 to 36 ppmv to 300 ppmv 40 to 600 ppmv Nitric Acid to 20 ppm 0.5 to 40 ppm Nitrogen Dioxide to 30 ppmv N/A Nitrogen Oxides * 1 to 50 ppmv 0.5 to 100 ppmv Ozone to 0.6 ppmv 0.15 to 1.8 ppmv Phenol to 25 ppmv 0.5 to 180 ppmv Phosphine to 50 ppmv 2.5 to 100 ppmv to 500 ppmv 12.5 to 1000 ppmv to 1000 ppmv 25 to 2000 ppmv Sulfur Dioxide to 30 ppmv 1 to 60 ppmv to 100 ppmv 2.5 to 200 ppmv to 1800 ppmv 50 to 3600 ppmv to 4000 ppmv 50 to 4000 ppmv to 5 % 0.1 to 10 % Toluene to 300 ppmv 5 to 600 ppmv Trichloroethylene * 5 to 100 ppmv 2.5 to 230 ppmv Vinyl Chloride * 1 to 20 ppmv 0.5 to 40 ppmv Water Vapor to 10 lbs/mmcf (0.03 to 0.16 mg/l) to 40 lbs/mmcf (0.1 to 0.64 mg/l) 1 to 20 lbs/mmcf 3 to 80 lbs/mmcf to 1 mg/l to 2 mg/l to 18 mg/l 0.5 to 32 mg/l Xylene to 200 ppmv 5 to 400 ppmv * Box contains 5 colorimetric tubes and 5 pre-tubes, for a total of 5 measurements. Other boxes contain 10 colorimetric tubes. Corporate Headquarters RAE Systems by Honeywell 3775 North First Street San Jose, CA USA raesales@raesystems.com DS Worldwide Sales Offices USA/Canada Europe Middle East China Asia Pacific

13 ToxiRAE Pro Personal Wireless Monitor for Toxic Gases and Oxygen The ToxiRAE Pro is the world s first wireless personal monitor for toxic gases and oxygen 1. The ToxiRAE Pro can detect a broad range of gases from carbon monoxide, hydrogen sulfide, and oxygen to ammonia, chlorine, and formaldehyde 2. The ToxiRAE Pro provides safety professionals wireless remote access to real-time instrument readings and alarm status for better visibility and faster incident response. The ToxiRAE Pro s intelligent interchangeable sensors store calibration data, which allows users to monitor for one gas one day and another gas the next, by simply swapping the sensors in the ToxiRAE Pro 3. Wireless elevates safety to the next level Over 20 intelligent interchangeable sensor options to cover a wide variety of gases Man Down Alarm with real-time remote wireless notification Easy to maintain with replaceable sensor, filter, and Li-ion battery Fully-automatic bump testing and calibration with AutoRAE 2 2 Applications Agriculture Pharmaceutical Chemical Pulp and paper Fire service / HazMat Steel manufacturing Food and beverage Water and wastewater industries Oil and gas Optional Accessories AutoRAE 2 Automatic Test and Calibration System Multi-unit charging station for up to five monitors ToxiRAE Pro Comes With: ToxiRAE Pro monitor with sensor as specified, alligator clip, protective rubber boot, and rechargeable battery installed Charging and PC communication cradle PC communication cable AC adapter (100 to 240 V, 50/60 Hz AC to 12 V DC) Calibration adapters Quick Start Guide CD with documentation Calibration card, quality certificate, and warranty/registration card FEATURES & BENEFITS Wireless access to real-time instrument readings and alarm status from any location Unmistakable five-way local and remote wireless notification of alarm conditions Intelligent sensors store calibration data, so they can be swapped in the field Most electrochemical sensors are shared with MultiRAE family instruments Largest display in its class Continuous datalogging Easy to use Reliable, rugged, and intrinsically safe Device Management with Honeywell Sotera

14 ToxiRAE Pro Specifications INSTRUMENT SPECIFICATIONS SIZE WEIGHT 7.76 oz. (220 g) SENSORS BATTERY DISPLAY DISPLAY READOUT KEYPAD SAMPLING CALIBRATION ALARM MODES DATALOGGING COMMUNICATION AND DATA DOWNLOAD WIRELESS NETWORK WIRELESS RANGE (TYPICAL) OPERATING TEMPERATURE HUMIDITY DUST AND WATER RESISTANCE SAFETY CERTIFICATIONS EMC/RFI WARRANTY 4.6" H x 2.4" W x 1.2" D (118 x 60 x 30 mm) WIRELESS FREQUENCY WIRELESS APPROVALS FCC Part 15, CE R&TTE, Others 4 RADIO MODULE Supports RM900 Over 20 intelligent interchangeable field-replaceable electrochemical sensors Rechargeable Li-ion battery - Operating time: > 30 hours (normal operation, non-wireless) - Recharge time: < 4 hours through charging cradle Graphical LCD display with white LED backlighting (activated when monitor is in alarm or with a button press) - Real-time reading of gas concentrations in parts per million (ppm) or mg/m 3 ; battery status; data logging on/off; wireless on/off and reception quality - STEL, TWA, and peak values 2 buttons for operation and programming Diffusion Automatic with AutoRAE 2 Test and Calibration System 2 or manual - Wireless remote alarm notification; audible (95 30 cm), vibration, visible alarm (flashing bright red LEDs), and on-screen indication of alarm conditions. - Man Down Alarm with pre-alarm and real-time remote wireless notification Continuous datalogging with a three-month capacity (at one-minute intervals) - User-configurable datalogging interval (from 1 to 3,600 seconds) - Data download and instrument set-up on PC via charging and PC comm. cradle - Data download via AutoRAE 2 Automatic Test and Calibration System - Wireless data and status transmission 1 via built-in RF modem (optional) ProRAE Guardian Real-Time Wireless Safety System or Closed Loop Network with the EchoView Host ToxiRAE Pro to Mesh Router, EchoView Host, or Mesh Reader 2 ~ 660 feet (200 meters) ToxiRAE Pro to RAELink3 Mesh or RAELink3 Z1 Mesh modems ~ 330 feet (100 meters) -4 to 131 F (-20 to 55 C) 0% to 95% relative humidity (non-condensing) IP-65 rating for dust and water ingress protection (validated by an independent test laboratory) CSA: Class I, Division 1, Groups A, B, C and D. T-code T4 Class I, Zone 0 A/Exia IIC T4 ATEX:, II 1G, Ex ia IIC Ga T4 IECEx: Ex ia IIC Ga T4 China Ex: Ex ia IIC T4 EMC directive: 2004/108/EC - Two years on non-consumable components and CO, H 2 S, and O 2 sensors - One year on all other sensors, battery, and other consumable parts ISM license-free band. IEEE Sub 1GHz SENSOR SPECIFICATIONS RANGE RESOLUTION AMMONIA (NH 3 ) 0 to 100 ppm 1 ppm CARBON MONOXIDE (CO) CARBON MONOXIDE (CO), EXT. RANGE CARBON MONOXIDE (CO), H 2 -COMP. 0 to 500 ppm 0 to 2,000 ppm 0 to 2,000 ppm 1 ppm 10 ppm 10 ppm CHLORINE (CI 2 ) 0 to 50 ppm 0.1 ppm CHLORINE DIOXIDE (CIO 2 ) 0 to 1 ppm 0.03 ppm ETHYLENE OXIDE (ETO-A) ETHYLENE OXIDE (ETO-B) ETHYLENE OXIDE (ETO-C), EXT. RANGE 0 to 100 ppm 0 to 10 ppm 0 to 500 ppm 1 Wireless units have a functioning RF modem and are ready for wireless deployments; non-wireless units cannot be upgraded to wireless. Additional equipment and/or software licenses may be required to enable remote wireless monitoring and alarm transmission. 2 Contact Honeywell RAE Systems for availability. 3 Honeywell RAE Systems recommends calibrating sensors on installation. 4 Contact Honeywell RAE Systems for country-specific wireless approvals and certificates. Specifications are subject to change. ORDERING INFORMATION (MODEL: PGM-1860) 1 ppm 0.1 ppm 10 ppm FORMALDEHYDE (HCHO) 0 to 10 ppm 0.05 ppm HYDROGEN (H 2 ) 0 to 1,000 ppm 10ppm HYDROGEN CYANIDE (HCN) 0 to 50 ppm 0.5 ppm HYDROGEN SULFIDE (H 2 S) HYDROGEN SULFIDE (H 2 S), EXT. RANGE 0 to 100 ppm 0 to 1,000 ppm 0.1 ppm 1 ppm METHYL MERCAPTAN (CH 3 -SH) 0 to 10 ppm 0.1 ppm NITRIC OXIDE (NO) 0 to 250 ppm 0.5 ppm NITROGEN DIOXIDE (NO 2 ) 0 to 20 ppm 0.1 ppm OXYGEN (O 2 ) 0 to 30% Vol. 0.1% Vol. PHOSPHINE (PH 3 ) 0 to 20 ppm 0.1 ppm SULFUR DIOXIDE (SO 2 ) 0 to 20 ppm 0.1 ppm Wireless or non-wireless versions are available 1 Refer to the Portables Pricing Guide for part numbers for monitors, accessories, maintenance kits, gas, sensors, and replacement parts For more information Device Management with Honeywell Sotera Europe, Middle East, Africa Life Safety Distribution GmbH Tel: (Freephone number) Tel: (Alternative number) Middle East Tel: (Fixed Gas Detection) gasdetection@honeywell.com Americas Honeywell Analytics Distribution Inc. Tel: Toll free: detectgas@honeywell.com Honeywell RAE Systems Phone: Toll Free: Asia Pacific Honeywell Analytics Asia Pacific Tel: +82 (0) India Tel: China Tel: analytics.ap@honeywell.com Technical Services EMEA: HAexpert@honeywell.com US: ha.us.service@honeywell.com AP: ha.ap.service@honeywell.com Datasheet_ToxiRAE-Pro-EC_DS / Honeywell International Inc. honeywellanalytics.com/products/ Honeywell-Sotera

15 ToxiRAE Pro LEL Personal Wireless Monitor for Combustible Gases and Vapors The ToxiRAE Pro LEL is the world s first personal wireless combustible gas monitor. The ToxiRAE Pro LEL provides safety professionals with wireless remote access to real-time instrument readings and alarm status for better visibility and faster incident response 1. The ToxiRAE Pro LEL quickly detects and accurately monitors combustibles in concentrations from 0 to 100% of the lower explosive limit (LEL). With the most extensive onboard gas library in its class, the ToxiRAE Pro LEL can be programmed to automatically read in %LEL of the specified compound. Wireless elevates safety to the next level Man Down Alarm with real-time remote wireless notification Easy to maintain with replaceable sensor, filter, and Li-ion battery Fully-automatic bump testing and calibration with AutoRAE 2 2 Applications Construction Foundries Oil and gas Pharmaceutical Steel mills Utilities Water and wastewater Welding / hot work Optional Accessories AutoRAE 2 Automatic Test and Calibration System Multi-unit charging station for up to five monitors ToxiRAE Pro LEL Single -Pack Comes With: ToxiRAE Pro LEL monitor with sensor, alligator clip, protective rubber boot, and rechargeable battery installed Charging and PC communication cradle PC communication cable AC adapter (100 to 240 V, 50/60 Hz AC to 12 V DC) Calibration adapters Quick Start Guide CD with documentation Calibration card, quality certificate, and warranty/registration card FEATURES & BENEFITS Wireless access to real-time instrument readings and alarm status from any location Unmistakable five-way local and remote wireless notification of alarm conditions 55 built-in LEL correction factors Largest display in its class Reliable, rugged, and intrinsically safe Continuous datalogging Easy to use Device Management with Honeywell Sotera

16 ToxiRAE Pro LEL Specifications SPECIFI CATIONS 4 SIZE WEIGHT SENSOR DETECTABLE GASES BATTERY DISPLAY DISPLAY READOUT KEYPAD SAMPLING CALIBRATION ALARM MODES DATALOGGING COMMUNICATION AND DATA DOWNLOAD WIRELESS NETWORK WIRELESS FREQUENCY WIRELESS RANGE (TYPICAL) OPERATING TEMPERATURE HUMIDITY HAZARDOUS LOCATION APPROVALS CE COMPLIANCE (EUROPEAN CONFORMITY) PERFORMANCE TEST COMPLIANCE WARRANTY 4.6" H x 2.4" W x 1.2"D (118 x 60 x 30 mm) 8.29 oz. (235 g.) Catalytic bead LEL sensor with 0 to 100% LEL range and 1% LEL resolution. Response time (T90) < 15 seconds Combustible gases and vapors from paints, coatings, fuels, degreasers, adhesives, solvents, resins, etchers, inks, pesticides, herbicides, etc. using 55 onboard correction factors Rechargeable Li-ion battery - Operating time: > 12 hours (normal operation, non-wireless) - Recharge time: < 4 hours through charging cradle Graphical LCD display with white LED backlighting (activated when monitor is in alarm or with a button press) - Real-time reading of % of lower explosive limit (LEL); battery status; data logging on/off; wireless on/off and reception quality - Peak values 2 buttons for operation and programming Diffusion Automatic with AutoRAE 2 Test and Calibration System 2 or manual - Wireless remote alarm notification 1 ; audible (95 30 cm), vibration, visible alarm (ashing bright red LEDs), and on-screen indication of alarm conditions - Man Down Alarm with pre-alarm and real-time remote wireless noti cation - Continuous datalogging 3 with a three-month capacity (at one-minute intervals) - User-con gurable datalogging interval (from 1 to 3,600 seconds) - Data download and instrument set-up on PC via charging and PC comm. cradle - Data download via AutoRAE 2 Automatic Test and Calibration System 2 - Wireless data and status transmission via built-in RF modem (optional) ProRAE Guardian Real-Time Wireless Safety System or Closed-Loop Network with the EchoView Host ISM license-free bands ToxiRAE Pro PID to Mesh Router, EchoView Host, or Mesh Reader 2 ~ 330 feet (100 meters) ToxiRAE Pro PID to RAELink3 Mesh or RAELink3 Z1 Mesh modems ~ 33 feet (10 meters) -4 to 131 F (-20 to 55 C) 0% to 95% relative humidity (non-condensing) CSA: Class I, Division 1, Groups A, B, C and D. T-code T4 Class I, Zone 0 A/Exia IIC T4 ATEX:, II 1G, Ex ia IIC Ga T4 IECEx: Ex ia IIC Ga T4 China Ex: Ex ia IIC T4 EMC directive: 2004/108/EC. R&TTE directive: 1999/5/EC. ATEX directive: 94/9/EC C22.2 No 152 ANSI/ISA Two years on non-consumable components - One year on sensor, fan, battery, and other consumable parts ORDERING INFORMATION (MODEL: PGM-1820) Wireless or non-wireless versions are available1 Bulk packages of 10 units are available Refer to the Portables Pricing Guide for part numbers for monitors, accessories, maintenance kits, gas, sensors, and replacement parts 1 Wireless units have a functioning RF modem and are ready for wireless deployments; non-wireless units cannot be upgraded to wireless. Additional equipment and/or software licenses may be required to enable remote wireless monitoring and alarm transmission. 2 Contact RAE Systems for availability. 3 Specifications are subject to change. For more information Device Management with Honeywell Sotera Europe, Middle East, Africa Life Safety Distribution GmbH Tel: (Freephone number) Tel: (Alternative number) Middle East Tel: (Fixed Gas Detection) gasdetection@honeywell.com Americas Honeywell Analytics Distribution Inc. Tel: Toll free: detectgas@honeywell.com Honeywell RAE Systems Phone: Toll Free: Asia Pacific Honeywell Analytics Asia Pacific Tel: +82 (0) India Tel: China Tel: analytics.ap@honeywell.com Technical Services EMEA: HAexpert@honeywell.com US: ha.us.service@honeywell.com AP: ha.ap.service@honeywell.com Datasheet_ToxiRAE-Pro_LEL_DS / Honeywell International Inc. honeywellanalytics.com/products/ Honeywell-Sotera

17 ToxiRAE Pro PID Personal Wireless Monitor For Volatile Organic Compounds The ToxiRAE Pro PID is the world s smallest volatile organic compound (VOC) monitor. Featuring Honeywell RAE Systems PID sensor, the ToxiRAE Pro PID can quickly detect and accurately monitor over 300 VOCs. The ToxiRAE Pro PID provides safety professionals wireless remote access to real-time instrument readings and alarm status for better visibility and faster incident response 1. With an onboard library of 190 correction factors, the ToxiRAE Pro PID can be programmed to automatically read in equivalent units of the specified compound. Wireless elevates safety to the next level Available in Industrial Hygiene (advanced) or Safety (basic) configurations Man Down Alarm with real-time remote wireless notification Easy to maintain with replaceable sensor, fan, filter, and battery Fully automatic bump testing and calibration with AutoRAE 2 2 Applications Industrial hygiene and safety Chemical plants Government health, safety, security, and environmental agencies Hazardous materials teams, first responders Oil and gas Pharmaceutical plants Environmental applications Environmental consulting Soil remediation Optional Accessories AutoRAE 2 Automatic Test and Calibration System Multi-unit charging station for up to five monitors ToxiRAE Pro PID Comes With: ToxiRAE Pro PID monitor with sensor as specified, alligator clip, protective rubber boot, and rechargeable battery installed Charging and PC communication cradle PC communication cable AC adapter (100 to 240 V, 50/60 Hz AC to 12 V DC) Calibration adapters Quick Start Guide CD with documentation Combined instrument/sensor cap removal tool Calibration card, quality certificate, and warranty/registration card FEATURES & BENEFITS Wireless access to real-time instrument readings and alarm status from any location Unmistakable five-way local and remote wireless notification of alarm conditions Largest display in its class Continuous datalogging 3 On-board correction factor library for 190 compounds Easy to use Reliable, rugged, and intrinsically safe Device Management with Honeywell Sotera

18 ToxiRAE Pro PID Personal Wireless Monitor for volatile Organic Compounds SPECIFI CATIONS 4 SIZE WEIGHT 8.29 oz. (235 g) SENSORS DETECTABLE GASES BATTERY DISPLAY DISPLAY READOUT KEYPAD SAMPLING CALIBRATION ALARM MODES DATALOGGING COMMUNICATION AND DATA DOWNLOAD WIRELESS NETWORK WIRELESS FREQUENCY WIRELESS RANGE (TYPICAL) OPERATING TEMPERATURE HUMIDITY HAZARDOUS LOCATION APPROVALS CE COMPLIANCE (EUROPEAN CONFORMITY) WARRANTY 4.6" H x 2.4" W x 1.2" D (118 x 60 x 30 mm) Photoionization sensor with 10.6 ev (standard) or 9.8 ev 2,3 (optional) lamp. Response time (T 90 ) < 15 sec. (Isobutene). Field-replaceable sensor. Easy access to lamp for cleaning A wide variety of ionizable chemicals using 190 built-in and over 300 published correction factors Rechargeable Li-ion battery - Operating time: > 12 hours (normal operation, non-wireless) - Recharge time: < 4 hours through charging cradle Graphical LCD display with white LED backlighting (activated when monitor is in alarm or with a button press) - Real-time reading of VOC concentrations in parts per million or mg/m3; battery status; data logging on/off; wireless on/off and reception quality - STEL, TWA, and peak values 2 buttons for operation and programming Internal fan Automatic with AutoRAE 2 Test and Calibration System 2 or manual - Wireless remote alarm notification 1 ; audible (95 30 cm), vibration, visible alarm (flashing bright red LEDs), and on-screen indication of alarm conditions - Man Down Alarm with pre-alarm and real-time remote wireless notification Continuous datalogging 3 with a three-month capacity (at one-minute intervals) - User-configurable datalogging interval (from 1 to 3,600 seconds) - Data download and instrument set-up on PC via charging and PC comm. cradle - Data download via AutoRAE 2 Automatic Test and Calibration System - Wireless data and status transmission 1 via built-in RF modem (optional) ProRAE Guardian Real-Time Wireless Safety System or Closed-Loop Network with the EchoView Host ISM license-free bands ToxiRAE Pro PID to Mesh Router, EchoView Host, or Mesh Reader 2 ~ 330 feet (100 meters) ToxiRAE Pro PID to RAELink3 Mesh or RAELink3 Z1 Mesh modems ~ 33 feet (10 meters) -4 to 131 F (-20 to 55 C) 0% to 95% relative humidity (non-condensing) CSA: Class I, Division 1, Groups A, B, C and D. T-code T4 Class I, Zone 0 A/Exia IIC T4 ATEX:, II 1G, Ex ia IIC Ga T4 IECEx: Ex ia IIC Ga T4 China Ex: Ex ia IIC T4 EMC directive: 2004/108/EC. R&TTE directive: 1999/5/EC. ATEX directive: 94/9/EC - Two years on non-consumable components - One year on all other sensors, battery, and other consumable parts ORDERING INFORMATION (MODEL: PGM-1800) Industrial Hygiene (advanced) and Safety (basic) configurations are available Industrial Hygiene configurations: Advanced PID sensor (0.1 to 2,000 ppm; 0.1 ppm resolution) Datalogging 9.8 ev or 10.6 ev lamp options Safety configurations: 10.6 ev; 1 to 1,000 ppm; 1 ppm resolution PID No datalogging 10.6 ev lamp only Wireless or non-wireless versions are available 1 Refer to the Portables Pricing Guide for part numbers for monitors, accessories, maintenance kits, gas, sensors, and replacement parts 1 Wireless units have a functioning RF modem and are ready for wireless deployments; non-wireless units cannot be upgraded to wireless. Additional equipment and/or software licenses may be required to enable remote wireless monitoring and alarm transmission. 2 Contact RAE Systems for availability. 3 Available with Industrial Hygiene configurations only 4 Specifications are subject to change For more information Device Management with Honeywell Sotera Europe, Middle East, Africa Life Safety Distribution GmbH Tel: (Freephone number) Tel: (Alternative number) Middle East Tel: (Fixed Gas Detection) gasdetection@honeywell.com Americas Honeywell Analytics Distribution Inc. Tel: Toll free: detectgas@honeywell.com Honeywell RAE Systems Phone: Toll Free: Asia Pacific Honeywell Analytics Asia Pacific Tel: +82 (0) India Tel: China Tel: analytics.ap@honeywell.com Technical Services EMEA: HAexpert@honeywell.com US: ha.us.service@honeywell.com AP: ha.ap.service@honeywell.com Datasheet_ToxiRAE-Pro-PID_DS / Honeywell International Inc. honeywellanalytics.com/products/ Honeywell-Sotera

19 ToxiRAE Pro CO 2 Personal Wireless Monitor for Carbon Dioxide The ToxiRAE Pro CO 2 is the world s first wireless personal carbon dioxide monitor. It provides safety professionals with wireless remote access to real-time instrument readings and alarm status for better visibility and faster incident response. The ToxiRAE Pro offers datalogging capability and is equipped with a Man Down alarm and policy enforcement to ensure greater safety while making sure compliance-related procedures such as periodic testing and calibration are performed. Wireless remote monitoring enhances worker safety Man Down Alarm with real-time wireless remote notification Easy to maintain, with replaceable sensor, filter, and Li-Ion battery Fully automatic bump testing and calibration with AutoRAE 2 Applications Chemical manufacturing Food and beverage Wineries and breweries Landfills Water and wastewater facilities Optional Accessories AutoRAE 2 Automatic Test and Calibration System Multi-unit charging station for up to five monitors AutoRAE 2 with ToxiRAE Pro cradles ToxiRAE Pro CO 2 comes with: ToxiRAE Pro CO 2 monitor with sensor as specified, alligator clip, protective rubber boot, and rechargeable battery installed Charging and PC communication cradle PC communication cable AC adapter (100 to 240 V, 50/60 Hz AC to 12 V DC) Calibration adapters Quick Start Guide CD with documentation Calibration card, quality certificate, and warranty/registration card FEATURES & BENEFITS Wireless access to real-time instrument readings and alarm status from any location Unmistakable five-way local and remote wireless notification of alarm conditions Intelligent sensor stores calibration data, so it can be swapped in the field Largest display in its class Continuous datalogging Easy to use Reliable and rugged Device Management with Honeywell Sotera

20 ToxiRAE Pro CO 2 Specifications SPECIFICATIONS SIZE WEIGHT 7.76 oz. (220 g) SENSORS BATTERY DISPLAY DISPLAY READOUT KEYPAD SAMPLING CALIBRATION ALARM MODES DATALOGGING COMMUNICATION AND DATA DOWNLOAD WIRELESS NETWORK 4.6" H x 2.4" W x 1.2" D (118 x 60 x 30 mm) Nondispersive infrared sensor Range: 0 to 50,000 ppm Resolution: 100 ppm Rechargeable Li-ion battery - Operating time: > 11 hours (normal operation 25 C / 77 F, non-wireless) - Recharge time: < 4 hours through charging cradle Graphical LCD display with white LED backlighting (activated when monitor is in alarm or with a button press) - Real-time reading of gas concentrations in parts per million (ppm); battery status; datalogging on/off; wireless on/off, and reception quality - STEL, TWA, and peak values 2 buttons for operation and programming Diffusion Automatic with AutoRAE 2 Test and Calibration System or manual - Wireless remote alarm noti cation; audible (95 30 cm), vibration, visible alarm ( ashing bright red LEDs), and on-screen indication of alarm conditions. - Man Down Alarm with pre-alarm and real-time remote wireless notification - Continuous datalogging with a three-month capacity (at one-minute intervals) - User-configurable datalogging interval (from 1 to 3,600 seconds) - Data download and instrument setup on PC via charging and PC comm. cradle - Data download via AutoRAE 2 Automatic Test and Calibration System - Wireless data and status transmission 1 via built-in RF modem (optional) ProRAE Guardian Real-Time Wireless Safety System or Closed-Loop Network with the EchoView Host WIRELESS FREQUENCY ISM license-free bands WIRELESS RANGE (TYPICAL) ToxiRAE Pro to Mesh Router or EchoView Host ~ 660 feet (200 meters) ToxiRAE Pro to RAELink3 Mesh or RAELink3 Z1 Mesh modems ~ 330 feet (100 meters) OPERATING TEMPERATURE -4 to 131 F (-20 to 55 C) HUMIDITY DUST AND WATER RESISTANCE 0% to 95% relative humidity (non-condensing) IP-65 HAZARDOUS LOCATION APPROVALS Unit cannot be used in hazardous area CE COMPLIANCE (EUROPEAN CONFORMITY) EMC directive: 2004/108/EC. R&TTE directive: 1999/5/EC WARRANTY - Two years on non-consumable components - One year on all other sensors, battery, and other consumable parts ORDERING INFORMATION (MODEL: PGM-1850) Wireless or non-wireless versions are available 1 Contact your local Honeywell RAE Systems distributor for part numbers for monitors, accessories, maintenance kits, gas, sensors, and replacement parts 1 Wireless units have a functioning RF modem and are ready for wireless deployments. Non-wireless units cannot be upgraded to wireless. Additional equipment and/or software licenses may be required to enable remote wireless monitoring and alarm transmission. Specifications are subject to change. For more information Device Management with Honeywell Sotera Europe, Middle East, Africa Life Safety Distribution GmbH Tel: (Freephone number) Tel: (Alternative number) Middle East Tel: (Fixed Gas Detection) gasdetection@honeywell.com Americas Honeywell Analytics Distribution Inc. Tel: Toll free: detectgas@honeywell.com Honeywell RAE Systems Phone: Toll Free: Asia Pacific Honeywell Analytics Asia Pacific Tel: +82 (0) India Tel: China Tel: analytics.ap@honeywell.com Technical Services EMEA: HAexpert@honeywell.com US: ha.us.service@honeywell.com AP: ha.ap.service@honeywell.com Datasheet_ToxiRAE-Pro-CO2_DS _EN 04/ Honeywell International Inc. honeywellanalytics.com/products/ Honeywell-Sotera

21 MicroRAE Wireless 4-Gas Monitor The MicroRAE four-gas portable detector brings enhanced user-friendliness and flexibility to wireless gas detection. This enables continuous, instant visibility of safety threats for faster, more informed decisions, to protect workers, facilities, and the environment, and to optimize operations. The MicroRAE is a wireless diffusion detector that simultaneously monitors up to four gases, including hydrogen sulfide, carbon monoxide, oxygen and combustibles (LEL). With its different wireless connectivity options the MicroRAE can deliver real-time instrument readings and alarm status to other wireless offerings such as ConneXt Plus, ConneXt Pro, ConneXt Loneworker 4 and Safety Communicator. Man Down Alarm with real-time remote wireless notification 1 GPS module for location Bluetooth low energy connection to a Smart Phone device for uplink data communication and device configuration Remote notification and Panic function Fully automated bump testing and calibration with AutoRAE 2 Industries Personal protection and general safety and compliance in: Lone Worker Applications Telecommunications Oil and Gas Firefighting Waste water treatment Petrochemicals Utilities Construction Optional Accessories AutoRAE 2 Automatic Test and Calibration Systems Gang Charger (5 units) Auxiliary filter Hand pump kit Truck mount charger FEATURES & BENEFITS Honeywell ConneXt compatible with Mesh and Wifi wireless configurations Compact and lightweight IP-67 water- and dust-resistant case Strong, protective, concussion-proof design Real-time gas concentration readings, location, alarm and status enabled by state of-the-art wireless technology Unmistakable five-way local and remote notification of alarm conditions Short bump test and calibration time Global approval for worldwide acceptance Filtered LEL sensor options to inhibit sensor poisoning Compatible with Safety Communicator Device Management with Honeywell Sotera

22 MicroRAE Specifications INSTRUMENT SPECIFICATIONS SIZE WEIGHT SENSORS BATTERY RUNNING TIME DISPLAY GRAPHIC KEYPAD DIRECT READOUT ALARMS DATALOGGING COMMUNICATION & DATA DOWNLOAD WIRELESS NETWORK WIRELESS RANGE (TYPICAL) EMC/RFI IP RATING 4.6 x 3.0 (2.6) 3.0 x 0.9 in (117 x 76 (66) 74 x 24mm) 7.03 oz (206g) (including Li-ion battery and clip) LEL Catalytic bead for combustibles, Liquid Oxygen (O 2 ), Electrochemical Sensor for CO, H 2 S, HCN Rechargeable Li-ion 15 hours continuous non-wireless, 11 hours continuous wireless Note: All battery specifications at 68 F (20 C); lower temperatures and alarm conditions will affect runtime Monochrome display, 1.73 x 1.29 in (44 x 33 mm) with 2 color back light modes Two-button operation Real time reading of gas concentration and Man Down indicators Multiple units display options Wireless and GPS ON/OFF and reception quality STEL, TWA, peak, and minimum values Intelliflash and policy enforcement indicators Multi-tone 100dB buzzer (at 11.8"/ 30 cm, typical), vibration alarm, and flashing LEDs and on-screen indication of alarm conditions Alarms: latching, non latching or manual override Additional diagnostic alarm and display message for low battery Wireless connectivity alarm Man Down Alarm and real-time remote wireless notification Continuous datalogging (6 month for 4 sensors at 1-minute intervals) User-configurabel datalogging intervals (from 1 to 3,600 seconds) Data download and instrument set-up and upgrades on PC via Travel Charger Wireless data and status transmission via built-in RF modem (optional) RAE Dedicated Wireless Mesh network or Standard WiFi Up to 650 ft (200m) for sub1ghz Mesh Radio 3, Up to 330 ft (100m) for WiFi 3, Up to 15 ft (5m) for BLE EMC directive: 2004/108/EC IP-67 CALIBRATION Two-point calibration (manual, or automatic with AutoRAE 2) US & Canada: Class I, Division 1, Groups A, B, C and D SAFETY CERTIFICATIONS II 2G Ex ia d IIC T4 Gb I M1 EX ia I Ma TEMPERATURE -4 to 140 F (-20 to 60 C) for T4 temperature code HUMIDITY 0% to 95% relative humidity (non-condensing) ATTACHMENTS Stainless-steel alligator clip: wrist wrap (optional) WARRANTY 2-year warranty on device and sensors 2 MODEL NUMBER PGM26XX WIRELESS ISM license free band. IEEE Sub 1 GHz, IEEE bands b/g 2.4 GHz WIRELESS APPROVALS FCC Part15, CE R&TTE, Bluetooth 4.0, GPS, Others 4 GAS MONITOR RANGE RESOLUTION OXYGEN (O 2 ) 0 to 30.0% 0.1% COMBUSTIBLE 0 to 100% LEL 1% LEL CARBON MONOXIDE (CO) 0 to 1,000 ppm ppm / 1 ppm 250 1,000 ppm / 3 ppm HYDROGEN SULFIDE (H 2 S) 0 to 100 ppm 0 50 ppm / 0.1 ppm ppm / 1 ppm HYDROGEN CYANIDE (HCN) 0 to 50 ppm 0.2 ppm 1 Additional equipment and/or software licenses may be required to enable remote wireless monitoring and alarm transmission 2 Against factory defects 3 Receiving > 80% 4 Contact RAE Systems for country specific wireless approvals and certificates Specifications are subject to change ORDERING INFORMATION Refer to the Portables Pricing guide for monitor configurations and accessories DOWNLOAD YOUR FREE TRAINING APP For more information Device Management with Honeywell Sotera Europe, Middle East, Africa Life Safety Distribution GmbH Tel: (Freephone number) Tel: (Alternative number) Middle East Tel: (Fixed Gas Detection) gasdetection@honeywell.com Americas Honeywell Analytics Distribution Inc. Tel: Toll free: detectgas@honeywell.com Honeywell RAE Systems Phone: Toll Free: Asia Pacific Honeywell Analytics Asia Pacific Tel: +82 (0) India Tel: China Tel: analytics.ap@honeywell.com Technical Services EMEA: HAexpert@honeywell.com US: ha.us.service@honeywell.com AP: ha.ap.service@honeywell.com Datasheet_MicroRAE_DS1121_05_EMEA_EN 04/ Honeywell International Inc. honeywellanalytics.com/products/ Honeywell-Sotera

23 QRAE 3 Wireless 4-Gas Monitor QRAE 3 is a wireless compact monitor for one to four gases. The QRAE 3 provides detection and monitoring of Oxygen (O 2 ), Combustibles, and toxic gases that include Hydrogen Sulfide (H 2 S), Carbon Monoxide (CO), Sulfur Dioxide (SO 2 ) and Hydrogen Cyanide (HCN). QRAE 3 can deliver wireless real-time instrument readings and alarm status 24/7. This provides better incident visibility and can improve response time. Man Down Alarm with real-time remote wireless notification 1 Easy maintenance with fieldreplaceable sensors and pump Fully automated bump testing and calibration with AutoRAE 2 Pumped or diffusion models available Large graphic display can rotate 180 º Applications Confined space entry and general safety and compliance in: Industrial safety Oil and gas Fireground Toxic Twins detection Environmental Fire and Emergency response Optional Accessories AutoRAE 2 Automatic Test and Calibration System External battery charger FEATURES & BENEFITS Available in Diffusion or Pumped version IP-65/67 water- and dust-resistant case Strong, protective, concussion-proof design Real-time gas concentration readings and alarm status enabled by state-ofthe-art wireless technology Unmistakable five-way local and remote wireless notification of alarm conditions Large graphical display icon-driven user interface through intuitive, simple-tooperate two-button user interface. Multi-language support: 18 languages encoded Easy access to pump, sensors, filter and battery compartment Device Management with Honeywell Sotera

24 QRAE 3 Specifications INSTRUMENT SPECIFICATIONS SIZE WEIGHT SENSORS BATTERY RUNNING TIME DISPLAY GRAPHIC KEYPAD DIRECT READOUT DATALOGGING DATALOGGING COMMUNICATION AND DATA DOWNLOAD WIRELESS NETWORK WIRELESS FREQUENCY AND APPROVALS 4 WIRELESS RANGE (TYPICAL) EM IMMUNITY IP RATING CALIBRATION For more information Diffusion: 5.5 "H x 3.2 "W x 1.5" W (140 mm x 82mm x 42mm) Pumped: 5.7 "H x 3.2 "W x 1.7" D (145 mm x 82 mm x 42mm) Diffusion: 12.9 oz (365 g with Li-ion battery and clip) Pumped: 14.5 oz (410 g with Li-ion battery, clip, and external filter) Up to four field-replaceable sensors: LEL: Catalytic bead for combustibles (built-in Correction Factor library) Oxygen: Liquid electrolyte O 2 Toxic: electrochemical for H 2 S, CO, SO 2, HCN Rechargeable Li-ion 14 hours continuous non-wireless, diffusion 11 hours continuous non- wireless, pumped 10 hours continuous with wireless, diffusion 8 hours continuous with wireless, pumped Note: All battery specifications at 68 F (20 C); lower temperatures and alarm conditions will affect runtime. Monochrome graphic display (128 x 80) Display size: 1.57" W x 1.06" H (40 x 27 mm) with backlighting Automatic or on-demand screen rotation Two-button operation Real-time reading of gas concentrations Battery status Pump status (if equipped with pump) Wireless on/off and wireless reception quality STEL, TWA, peak, and minimum values Man Down and policy enforcement indicators Multi-tone 95dB buzzer (at 11.8"/ 30 cm, typical), vibration alarm, and flashing red LEDs and on-screen indication of alarm conditions Alarms: latching, non latching or manual override Additional diagnostic alarm and display message for low battery Pump stall alarm (pumped version only) Man Down Alarm with pre-alarm and real-time remote wireless notification Continuous datalogging (3 months for 4 sensors at 1-minute intervals, 24/7) User-configurable datalogging intervals (from 1 to 3,600 seconds) Data download and instrument set-up and upgrades on PC via Travel Charger Wireless data and status transmission via built-in RF modem (optional) Mesh RAE Systems Dedicated Wireless Network ISM license free band, 868Mhz or 900Mhz FCC Part15, CE R&TTE, ANATEL EchoView Host: LOS > 650 ft (200 m) 3 ProRAE Guardian and RAEMesh Reader: LOS > 650 ft (200 m) 3 ProRAE Guardian and RAELink3 Mesh: LOS > 330 ft (100 m) 3 EMI and ESD test: 100MHz to 1GHz 30V/m, no alarm Contact: ±4kV Air: ±8kV, no alarm Pumped: IP-65 Diffusion: IP-67 Two-point calibration for zero and span (manual, or automatic with AutoRAE 2) Europe, Middle East, Africa Life Safety Distribution GmbH Tel: (Freephone number) Tel: (Alternative number) Middle East Tel: (Fixed Gas Detection) gasdetection@honeywell.com Asia Pacific Honeywell Analytics Asia Pacific Tel: +82 (0) India Tel: China Tel: analytics.ap@honeywell.com INSTRUMENT SPECIFICATIONS Built-in pump or diffusion SAMPLING PUMP Can sample through tubing up to 98ft (30m) HAZARDOUS AREA APPROVAL TEMPERATURE HUMIDITY ATTACHMENTS LANGUAGES WARRANTY Specifications are subject to change. ORDERING INFORMATION US and Canada: classified for use in Class I, Division 1, Groups A, B, C and D Europe: IECEx/ATEX (II 1G Ex ia IIC T4) -4 to 122 F (-20 to 50 C) for T4 temperature code 0% to 95% relative humidity (non-condensing) Stainless-steel alligator clip Swivel belt clip (optional) Pouch (optional) Arabic, Chinese, Czech, Dutch, English, French, German, Indonesian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Spanish, and Swedish (language must be changed through ProRAE Studio II) 2-year warranty on device 2 3-year warranty on LEL, O 2, CO, H 2 S sensors 2 1-year warranty on SO 2, HCN sensors 2 DEFAULT SENSOR SPECI CATIONS GAS MONITOR Range Resolution OXYGEN (O 2 ) 0 to 30.0% 0.1% COMBUSTIBLE 0 to 100% LEL 1% LEL CARBON MONOXIDE (CO) 0 to 500 ppm 1 ppm HYDROGEN SULFIDE (H 2 S) 0 to 100 ppm 0.1 ppm SULFUR DIOXIDE (SO 2 ) 0 to 20 ppm 0.1 ppm HYDROGEN CYANIDE (HCN) 0 to 50 ppm 0.2 ppm AMMONIA (NH 3 ) 100 ppm 1 ppm PHOSPHINE (PH 3 ) 20 ppm 0.01 ppm CHLORINE (CL 2 ) 0 to 50 ppm 0.05 ppm NITROGEN DIOXIDE (NO 2 ) 0 to 50 ppm 0.1 ppm Wireless 1 and non-wireless options available for all configurations Diffusion and pumped versions available for all configuration Refer to the Portables Pricing guide for monitor configuration and accessories 1 Additional equipment and/or software licenses may be required to enable remote wireless monitoring and alarm transmission 2 Against factory defects 3 Receiving >80% 4 Please contact RAE Systems for specific wireless certifications Device Management with Honeywell Sotera Americas Honeywell Analytics Distribution Inc. Tel: Toll free: detectgas@honeywell.com Honeywell RAE Systems Phone: Toll Free: Technical Services EMEA: HAexpert@honeywell.com US: ha.us.service@honeywell.com AP: ha.ap.service@honeywell.com Datasheet_QRAE3_DS _EN 04/ Honeywell International Inc. honeywellanalytics.com/products/ Honeywell-Sotera

25 MultiRAE Lite Wireless Portable Multi-Gas Monitor The MultiRAE Lite is the optimal one-to-six 1 -gas monitor for personal protection and leak detection applications. The MultiRAE Lite is available in pumped and diffusion versions and features the broadest selection of sensor options in its class. The MultiRAE Lite can be configured to exactly meet the detection needs and compliance requirements of various countries, industries, and applications. The MultiRAE Lite s optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response. Available in pumped and diffusion versions Highly versatile and customizable Man Down Alarm with real-time remote wireless notification Easy maintenance with replaceable sensors, pump, and plug-and-play battery Fully automatic bump testing and calibration with AutoRAE 2 KEY FEATURES Wireless. Versatile. Proven. Wireless access to real-time instrument readings and alarm status from any location Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm 2 Over 25 interchangeable sensor options, including PID 4 for VOCs, NDIR 5 and catalytic for combustibles, and NDIR for CO 2 Intelligent sensors store calibration data, so they can be swapped in the field 6 Large graphical display with easy-to-use, icon-driven user interface Continuous datalogging (6 months for 5 sensors, 24x7) APPLICATIONS Personal protection and multi-gas leak detection in industries such as: - Chemical - Food and beverage - Oil and gas (downstream) - Pharmaceutical - Telecommunications - Wastewater treatment Fire overhaul Confined space testing with the MultiRAE Lite COMPATIBLE

26 MultiRAE Lite Wireless Portable Multi-Gas Monitor SPECIFICATIONS Instrument Specifications 7 Size - Pumped model: 7.6" H x 3.8" W x 2.6" D (193 x 96.5 x 66 mm) - Diffusion model: 6.9" x 3.8" x 2.2" (175 x 96.5 x 56 mm) Weight - Pumped model: 31 oz (880 g) - Diffusion model: 26.8 oz (760g) Sensors Over 25 intelligent interchangeable field-replaceable sensors including PID for VOCs, electrochemical sensors for toxic gases and oxygen, combustible LEL and NDIR sensors, and CO 2 NDIR sensor Battery Options, Runtime 8 and Recharge Time Display Display Readout Keypad Buttons Sampling Calibration Alarms - Rechargeable Li-ion ~12-hr. (pumped)/18-hr. (diffusion) runtime, < 6-hr. recharge time - Extended duration Li-ion ~18-hr. (pumped)/28-hr. (diffusion) runtime, < 9-hr. recharge time - Alkaline adapter with 4 x AA batteries ~6-hr. (pumped)/8-hr. (diffusion) runtime Monochrome graphical LCD display (128 x 160) with backlighting. Automatic screen flip feature - Real-time reading of gas concentrations; PID measurement gas and correction factor; Man Down Alarm on/off; visual compliance indicator; battery status; datalogging on/off; wireless on/off and reception quality. - STEL, TWA, peak, and minimum values 3 operation and programming keys (Mode, Y/+, and N/-) Built-in pump or diffusion Automatic with AutoRAE 2 Test and Calibration System 3 or manual Wireless remote alarm notification; audible (95 30 cm), vibration, visible (flashing bright red LEDs), and on-screen indication of alarm conditions - Man Down Alarm with pre-alarm and real-time remote wireless notification 2 Datalogging Continuous datalogging (6 months for 5 sensors at 1-minute intervals, 24/7) - User-configurable datalogging intervals (from 1 to 3,600 seconds) Communication and Data Download Wireless Network Wireless Range (Typical) Operating Temperature Humidity Dust and Water Resistance - Data download and instrument set-up and upgrades on PC via desktop charging and PC comm. cradle, travel charger, or AutoRAE 2 Automatic Test and Calibration System 3 - Wireless data and alarm status transmission via built-in RF modem (optional) ProRAE Guardian Real-Time Wireless Safety System or EchoView Host-based Closed-Loop System MultiRAE Lite to RAELink3 [Z1] Mesh modem ~330 feet (100 meters) MultiRAE Lite to EchoView Host, RAEMesh Reader or RAEPoint ~660 feet (200 meters) MultiRAE Lite Wi-Fi to Access Point feet (100 meters) -4 to 122 F (-20 to 50 C) 0% to 95% relative humidity (non-condensing) IP-65 (pumped); IP-67 (diffusion) ingress protection rating Safety Certifications CSA: Class I, Division 1, Groups A, B, C and D, T4 Class II, Division 1, Groups E, F, G T85 C ATEX: 0575 II 1G Ex ia IIC T4 Ga 2G Ex ia d IIC T4 Gb with IR Sensor installed I M1 Ex ia I Ma IECEx: Ex ia IIC T4 Ga Ex ia d IIC T4 Gb with IR Sensor installed I M1 Ex ia I Ma IECEx/ANZEx: Ex ia IIC T4 Ga Ex ia d IIC T4 Gb with IR Sensor installed Ex ia I Ma EMI/RFI 8 EMC directive: 2004/108/EC Performance Tests LEL CSA C22.2 No. 152; ISA Languages Arabic, Chinese, Czech, Danish, Dutch, English, French, German, Indonesian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Spanish, Swedish, and Turkish Warranty - Two years on non-consumable components and catalytic LEL, CO, H 2 S, and O 2 sensors - One year on all other sensors, pump, battery, and other consumable parts Wireless Frequency ISM license free band. IEEE Sub 1GHz Wi-Fi b/g Wireless Approvals FCC Part 15, CE R&TTE, Others 4 Radio Module Supports RM900A Sensor Specifications 7 PID Sensor 4 Range Resolution VOC 10.6 ev 0 to 1,000 ppm 1 ppm Combustible Sensors Range Resolution Catalytic LEL NDIR (0-100% LEL Methane) NDIR (0-100% Vol. Methane) 5 0 to 100% LEL 0 to 100% LEL 0 to 100% Vol. 1% LEL 1% LEL 0.1% Vol. Carbon Dioxide Sensor Range Resolution Carbon Dioxide (CO 2 ) NDIR 0 to 50,000 ppm 100 ppm Electrochemical Sensors Range Resolution Ammonia (NH 3 ) 0 to 100 ppm 1 ppm Carbon Monoxide (CO) Carbon Monoxide (CO), Ext. Range Carbon Monoxide (CO), H 2 -comp. Carbon Monoxide (CO) + Hydrogen Sulfide (H 2 S) Combo 0 to 500 ppm 0 to 2,000 ppm 0 to 2,000 ppm 0 to 500 ppm 0 to 200 ppm 1 ppm 10 ppm 10 ppm 1 ppm 0.1 ppm Chlorine (Cl 2 ) 0 to 50 ppm 0.1 ppm Chlorine Dioxide (ClO 2 ) 0 to 1 ppm 0.03 ppm Ethylene Oxide (EtO-A) Ethylene Oxide (EtO-B) Ethylene Oxide (EtO-C), Ext. Range 9 0 to 100 ppm 0 to 10 ppm 0 to 500 ppm 0.5 ppm 0.1 ppm 10 ppm Formaldehyde (HCHO) 0 to 10 ppm 0.05 ppm Hydrogen (H 2 ) 9 0 to 1,000 ppm 10 ppm Hydrogen Cyanide (HCN) 0 to 50 ppm 0.5 ppm Hydrogen Sulfide (H 2 S) Hydrogen Sulfide (H 2 S), Ext. Range 9 0 to 100 ppm 0 to 1,000 ppm 0.1 ppm 1 ppm Methyl Mercaptan (CH 3 -SH) 0 to 10 ppm 0.1 ppm Nitric Oxide (NO) 0 to 250 ppm 0.5 ppm Nitrogen Dioxide (NO 2 ) 0 to 20 ppm 0.1 ppm Oxygen (O 2 ) 0 to 30% Vol. 0.1% Vol. Phosphine (PH 3 ) 0 to 20 ppm 0.1 ppm Sulfur Dioxide (SO 2 ) 0 to 20 ppm 0.1 ppm 1 A two-gas combination sensor is required for a 6-gas configuration. 2 Additional equipment and/or software licenses may be required to enable remote wireless monitoring and alarm transmission. 3 AutoRAE 2 supports the MultiRAE Lite pumped version only. 4 PID sensor requires a pumped configuration. 5 NDIR combustible sensors require a pumped configuration in CSA countries. 6 RAE Systems recommends calibrating sensors on installation. 7 Specifications are subject to change. 8 Specification for non-wireless monitors. 9 Supported in MultiRAE Lite Diffusion only. 10 Please contact RAE Systems for specific wireless approvals. ORDERING INFORMATION (MODELS: PGM-6208 AND PGM-6208D) Wireless 2 and non-wireless configurations are available Refer to the Portables Pricing Guide for part numbers for monitors, accessories, sampling and calibration kits, gas, sensors, and replacement parts CORPORATE HEADQUARTERS RAE Systems by Honeywell 3775 North First Street San Jose, CA USA RAE-InsideSales@honeywell.com DS WORLDWIDE SALES OFFICES USA/Canada Europe / Middle East China Asia Pacific

27 MultiRAE Wireless Portable Six-Gas Monitor With Advanced VOC Detection Capability The MultiRAE is the most advanced portable chemical detector on the market. The MultiRAE delivers the broadest PID sensor range in its class and the versatility to support 25 intelligent interchangeable sensor options (such as PID, NDIR for combustibles and CO2, ammonia, chlorine, formaldehyde, and phosphine) to fully meet the monitoring needs in a variety of applications, including industrial hygiene, personal protection, leak detection, and HazMat response. The MultiRAE s optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location 1 for better situational awareness and faster incident response. Highly versatile and customizable Best PID in its class (0 to 5,000 ppm range, 0.1 ppm resolution) Man Down Alarm with real-time remote wireless notification Compliant with MIL-SPEC-810G performance standard Fully automatic bump testing and calibration with AutoRAE 2 KEY FEATURES Wireless. Versatile. Proven. Wireless access to real-time instrument readings and alarm status from any location 1 Unmistakable five-way local and remote wireless notification of alarm conditions, including Man Down Alarm 1 Intelligent sensors store calibration data, so they can be swapped in the field 2 Extensive on-board gas libraries (190 VOCs and 55 combustible gases) Largest display in its class Continuous datalogging (6 months for 5 sensors, 24x7) APPLICATIONS Industrial hygiene, personal protection, and leak detection in industries such as: - Aviation (wing tank entry) - Chemical - Environmental - Oil and gas - Pharmaceutical - Shipping / marine HazMat response Clandestine drug labs MultiRAE used for worker exposure monitoring at an oil refinery MIL-STD-461F MIL-STD-810G

28 MultiRAE Wireless Portable Six-Gas 3 Monitor with Advanced VOC Detection Capability SPECIFICATIONS Instrument Specifications 4 Size 7.6" H x 3.8" W x 2.6" D (193 x 96.5 x 66 mm) Weight 31 oz (880 g) Sensors 25 intelligent interchangeable field-replaceable sensors including PID for VOCs, electrochemical sensors for toxic gases and oxygen, combustible LEL and NDIR sensors, and CO 2 NDIR sensor Battery Options, Runtime 5 and Recharge Time Display Display Readout Keypad Buttons Sampling Calibration Alarms - Rechargeable Li-ion (~12-hr. runtime, < 6-hr. recharge time) - Extended duration Li-ion (~18-hr. runtime, < 9-hr. recharge time) - Alkaline adapter with 4 x AA batteries (~6-hr. runtime) Monochrome graphical LCD display (128 x 160) with backlighting. Automatic screen flip feature. - Real-time reading of gas concentrations; PID measurement gas and correction factor; Man Down Alarm on/off; visual compliance indicator; battery status; datalogging on/off; wireless on/off and reception quality. - STEL, TWA, peak, and minimum values 3 operation and programming keys (Mode, Y/+, and N/-) Built-in pump. Average flow rate: 250 cc/min. Auto shutoff in low-flow conditions Automatic with AutoRAE 2 Test and Calibration System or manual Wireless remote alarm notification; audible (95 30 cm), vibration, visible (flashing bright red LEDs), and on-screen indication of alarm conditions - Man Down Alarm with pre-alarm and real-time remote wireless notification 1 Datalogging Continuous datalogging (6 months for 5 sensors at 1-minute intervals, 24/7) - User-configurable datalogging intervals (from 1 to 3,600 seconds) Communication and Data Download Wireless Network Wireless Range (Typical) - Data download and instrument set-up and upgrades on PC via desktop charging and PC comm. cradle, travel charger, or AutoRAE 2 Automatic Test and Calibration System - Wireless data and alarm status transmission via built-in RF modem (optional) ProRAE Guardian Real-Time Wireless Safety System or EchoView Host-based Closed-Loop System MultiRAE to RAELink3 [Z1] Mesh modem ~330 feet (100 meters) MultiRAE to EchoView Host, RAEMesh Reader or RAEPoint ~660 feet (200 meters) Operating Temperature -4 to 122 F (-20 to 50 C) Humidity 0% to 95% relative humidity (non-condensing) Dust and Water Resistance IP-65 ingress protection rating (dust-tight and waterproof against hosing jets coming from all directions) Safety Certifications CSA: Class I, Division 1, Groups A, B, C and D, T4 Class II, Division 1; Groups E, F, G; T85 C ATEX: 0575 II 1G Ex ia IIC T4 Ga 2G Ex ia d IIC T4 Gb with IR Sensor installed I M1 Ex ia I Ma IECEx: Ex ia IIC T4 Ga Ex ia d IIC T4 Gb with IR Sensor installed I M1 Ex ia I Ma IECEx/ANZEx: Ex ia IIC T4 Ga Ex ia d IIC T4 Gb with IR Sensor installed Ex ia I Ma EMC/RFI EMC directive: 2004/108/EC Performance Tests MIL-STD-810G and 461F compliant. LEL CSA C22.2 No. 152; ISA Languages Arabic, Chinese, Czech, Danish, Dutch, English, French, German, Indonesian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Spanish, Swedish, and Turkish Warranty - Two years on non-consumable components and catalytic LEL, CO, H 2S, and O 2 sensors - One year on all other sensors, pump, battery, and other consumable parts Wireless Frequency ISM license free band. IEEE Sub 1GHz Wireless Approvals FCC Part 15, CE R&TTE, Others 6 Radio Module Supports RM900A Sensor Specifications 4 PID Sensors Range Resolution VOC 10.6 ev (Ext. Range) 0 to 5,000 ppm 0.1 ppm Combustible Sensors Range Resolution Catalytic LEL NDIR (0-100% LEL Methane) NDIR (0-100% Vol. Methane) 0 to 100% LEL 0 to 100% LEL 0 to 100% Vol. 1% LEL 1% LEL 0.1% Vol. Carbon Dioxide Sensor Range Resolution Carbon Dioxide (CO 2 ) NDIR 0 to 50,000 ppm 100 ppm Electrochemical Sensors Range Resolution Ammonia (NH 3 ) 0 to 100 ppm 1 ppm Carbon Monoxide (CO) Carbon Monoxide (CO), Ext. Range Carbon Monoxide (CO), H 2 -comp. Carbon Monoxide (CO) + Hydrogen Sulfide (H 2 S) Combo 0 to 500 ppm 0 to 2,000 ppm 0 to 2,000 ppm 0 to 500 ppm 0 to 200 ppm 1 ppm 10 ppm 10 ppm 1 ppm 0.1 ppm Chlorine (Cl 2 ) 0 to 50 ppm 0.1 ppm Chlorine Dioxide (ClO 2 ) 0 to 1 ppm 0.03 ppm Ethylene Oxide (EtO-A) Ethylene Oxide (EtO-B) 0 to 100 ppm 0 to 10 ppm 0.5 ppm 0.1 ppm Formaldehyde (HCHO) 0 to 10 ppm 0.05 ppm Hydrogen Cyanide (HCN) 0 to 50 ppm 0.5 ppm Hydrogen Sulfide (H 2 S) 0 to 100 ppm 0.1 ppm Methyl Mercaptan (CH 3 -SH) 0 to 10 ppm 0.1 ppm Nitric Oxide (NO) 0 to 250 ppm 0.5 ppm Nitrogen Dioxide (NO 2 ) 0 to 20 ppm 0.1 ppm Oxygen (O 2 ) 0 to 30% Vol. 0.1% Vol. Phosphine (PH 3 ) 0 to 20 ppm 0.1 ppm Sulfur Dioxide (SO 2 ) 0 to 20 ppm 0.1 ppm 1 Additional equipment and/or software licenses may be required to enable remote wireless monitoring and alarm transmission. 2 RAE Systems recommends calibrating sensors on installation. 3 A two-gas combination sensor is required for a 6-gas configuration. 4 Specifications are subject to change. 5 Specification for non-wireless monitors. 6 Contact RAE Systems for country specific wireless approvals and certificates. ORDERING INFORMATION (MODEL: PGM-6228) Wireless 1 and non-wireless configurations are available Refer to the Portables Pricing Guide for part numbers for monitors, accessories, sampling and calibration kits, gas, sensors, and replacement parts CORPORATE HEADQUARTERS RAE Systems by Honeywell 3775 North First Street San Jose, CA USA RAE-InsideSales@honeywell.com DS WORLDWIDE SALES OFFICES USA/Canada Europe / Middle East China Asia Pacific

29 MultiRAE Pro Wireless Portable Multi-Threat Radiation and Chemical Detector The MultiRAE Pro is the industry s only portable wireless multithreat monitor. The MultiRAE Pro s ability to simultaneously detect gamma radiation and toxic industrial chemicals (TICs/TIMs) enables responders to reduce the equipment footprint and achieve greater agility when operating downrange. The MultiRAE Pro s optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location 1 for better situational awareness and faster incident response. Detector of choice for government agencies and top HazMat teams worldwide Highly versatile and customizable Man Down Alarm with real-time remote wireless notification Compliant with MIL-STD-810G and 461F performance standards Fully automatic bump testing and calibration with AutoRAE 2 KEY FEATURES Wireless. Versatile. Proven. All-in-one monitoring capabilities for radiation, VOCs, oxygen, toxic and combustible gases, up to 6 threat types at a time 2 Over 25 interchangeable sensor options, including parts-per-billion PID and gamma radiation Wireless access to real-time instrument readings and alarm status from any location Unmistakable five-way local and remote wireless notification of alarm conditions Intelligent sensors store calibration data, so they can be swapped in the field 3 Large graphical display with easy-to-use, icon-driven user interface APPLICATIONS Civil defense (search and rescue) Homeland security HazMat response Military Semiconductor manufacturing Environmental CBRN detection with the MultiRAE Pro MIL-STD-461F MIL-STD-810G

30 MultiRAE Pro Wireless Portable Multi-Threat Radiation and Chemical Detector SPECIFICATIONS Instrument Specifications 4 Size 7.6" H x 3.8" W x 2.6" D (193 x 96.5 x 66 mm) Weight 31 oz (880 g) Sensors Over 25 intelligent interchangeable field-replaceable sensors including gamma radiation, ppb and ppm PID sensors for VOCs, electrochemical sensors for toxic gases and oxygen, combustible LEL and NDIR sensors, and CO 2 NDIR sensor Battery Options, Runtime 5 and Recharge Time Display Display Readout Keypad Buttons Sampling Calibration Alarms - Rechargeable Li-ion (~12-hr. runtime, < 6-hr. recharge time) - Extended duration Li-ion (~18-hr. runtime, < 9-hr. recharge time) - Alkaline adapter with 4 x AA batteries (~6-hr. runtime) Monochrome graphical LCD display (128 x 160) with backlighting Automatic screen flip feature - Real-time reading of gas concentrations; PID measurement gas and correction factor; Man Down Alarm on/off; visual compliance indicator; battery status; datalogging on/off; wireless on/off and reception quality. - STEL, TWA, peak, and minimum values 3 operation and programming keys (Mode, Y/+, and N/-) Built-in pump. Average flow rate: 250 cc/min. Auto shutoff in low-flow conditions Automatic with AutoRAE 2 Test and Calibration System or manual Wireless remote alarm notification; multi-tone audible (95 30 cm), vibration, visible (flashing bright red LEDs), and on-screen indication of alarm conditions - Man Down Alarm with pre-alarm and real-time remote wireless notification Datalogging Continuous datalogging (6 months for 5 sensors at 1-minute intervals, 24/7) - User-configurable datalogging intervals (from 1 to 3,600 seconds) Communication and Data Download Wireless Network Wireless Range (Typical) - Data download and instrument set-up and upgrades on PC via desktop charging and PC comm. cradle, travel charger, or AutoRAE 2 Automatic Test and Calibration System - Wireless data and alarm status transmission via built-in RF modem (optional) ProRAE Guardian Real-Time Wireless Safety System or EchoView Host-based Closed-Loop System MultiRAE Pro to RAELink3 [Z1] Mesh modem ~330 feet (100 meters) MultiRAE Pro to EchoView Host, RAEMesh Reader or RAEPoint ~660 feet (200 meters) Operating Temperature -4 to 122 F (-20 to 50 C) Humidity 0% to 95% relative humidity (non-condensing) Dust and Water IP-65 ingress protection rating Resistance Safety Certifications CSA: Class I, Division 1, Groups A, B, C and D, T4 Class II, Division 1, Groups E, F, G T85 C ATEX: 0575 II 1G Ex ia IIC T4 Ga 2G Ex ia d IIC T4 Gb with IR Sensor installed I M1 Ex ia I Ma IECEx: Ex ia IIC T4 Ga Ex ia d IIC T4 Gb with IR Sensor installed I M1 Ex ia I Ma IECEx/ANZEx: Ex ia IIC T4 Ga Ex ia d IIC T4 Gb with IR Sensor installed Ex ia I Ma EMI/RFI 5 EMC directive: 2004/108/EC Performance Tests MIL-STD-810G and 461F compliant. LEL CSA C22.2 No. 152; ISA Languages Arabic, Chinese, Czech, Danish, Dutch, English, French, German, Indonesian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Spanish, Swedish, and Turkish Warranty - Two years on non-consumable components and catalytic LEL, CO, H 2 S, and O 2 sensors - One year on all other sensors, pump, battery, and other consumable parts Wireless Frequency ISM license free band. IEEE Sub 1GHz Wireless Approvals FCC Part 15, CE R&TTE, Others 4 Radio Module Supports RM900A Sensor Specifications 4 Radiation Sensor Range Sensor Type Gamma 0 to 20,000 µrem/h (dose rate) 1cc CsI (Tl) scintillator with photodiode PID Sensors Range Resolution VOC 10.6 ev (Ext. Range) VOC 10.6 ev (ppb) 0 to 5,000 ppm 0 to 2,000 ppm 0.1 ppm 10 ppb Combustible Sensors Range Resolution Catalytic LEL NDIR (0-100% LEL Methane) NDIR (0-100% Vol. Methane) 0 to 100% LEL 0 to 100% LEL 0 to 100% Vol. 1% LEL 1% LEL 0.1% Vol. Carbon Dioxide Sensor Range Resolution Carbon Dioxide (CO 2 ) NDIR 0 to 50,000 ppm 100 ppm Electrochemical Sensors Range Resolution Ammonia (NH 3 ) 0 to 100 ppm 1 ppm Carbon Monoxide (CO) Carbon Monoxide (CO), Ext. Range Carbon Monoxide (CO), H 2 -comp. Carbon Monoxide (CO) + Hydrogen Sulfide (H 2 S) Combo 0 to 500 ppm 0 to 2,000 ppm 0 to 2,000 ppm 0 to 500 ppm 0 to 200 ppm 1 ppm 10 ppm 10 ppm 1 ppm 0.1 ppm Chlorine (Cl 2 ) 0 to 50 ppm 0.1 ppm Chlorine Dioxide (ClO 2 ) 0 to 1 ppm 0.03 ppm Ethylene Oxide (EtO-A) Ethylene Oxide (EtO-B) 0 to 100 ppm 0 to 10 ppm 0.5 ppm 0.1 ppm Formaldehyde (HCHO) 0 to 10 ppm 0.05 ppm Hydrogen Cyanide (HCN) 0 to 50 ppm 0.5 ppm Hydrogen Sulfide (H 2 S) 0 to 100 ppm 0.1 ppm Methyl Mercaptan (CH 3 -SH) 0 to 10 ppm 0.1 ppm Nitric Oxide (NO) 0 to 250 ppm 0.5 ppm Nitrogen Dioxide (NO 2 ) 0 to 20 ppm 0.1 ppm Oxygen (O 2 ) 0 to 30% Vol. 0.1% Vol. Phosphine (PH 3 ) 0 to 20 ppm 0.1 ppm Sulfur Dioxide (SO 2 ) 0 to 20 ppm 0.1 ppm 1 Additional equipment and/or software licenses may be required to enable remote wireless monitoring and alarm transmission. 2 A two-gas combination sensor is required for a 6-gas configuration. 3 RAE Systems recommends calibrating sensors on installation. 4 Specifications are subject to change. 5 Specification for non-wireless monitors. 6 Please contact RAE Systems for specific wireless approvals ORDERING INFORMATION (MODEL: PGM-6248) Wireless 1 and non-wireless configurations are available Refer to the Portables Pricing Guide for part numbers for monitors, accessories, sampling and calibration kits, gas, sensors, and replacement parts CORPORATE HEADQUARTERS RAE Systems by Honeywell 3775 North First Street San Jose, CA USA RAE-InsideSales@honeywell.com DS WORLDWIDE SALES OFFICES USA/Canada Europe / Middle East China Asia Pacific

31 MultiRAE Benzene Wireless Portable Six-Gas Monitor With Benzene-Specific Measurement The MultiRAE Benzene is the only gas monitor that includes up to 6-gas 1 detection and real-time wireless capability, plus benzene-specific measurement. The MultiRAE Benzene monitor combines the ability to make quick benzene-specific assessment ( snapshot ) measurements 2 with the advantages of a versatile multi-gas monitor that can support approximately 20 intelligent interchangeable sensor options. Its optional wireless capability improves safety by providing real-time access to instrument readings and alarm status from any location, which delivers better situational awareness and faster incident response. Unique instrument for multiple applications Highly versatile and customizable Benzene-specific measurement up to 200 ppm with 0.1 ppm resolution Man Down Alarm with real-time remote wireless notification Fully automatic bump testing and calibration with AutoRAE 2 The MultiRAE Benzene monitor s unique features make it an ideal instrument for industrial applications, from confined space entry pre-screening during plant maintenance to personal protection, leak detection and refinery downstream monitoring. KEY FEATURES Wireless. Versatile. Proven. Versatile multi-gas and Benzene-specific 2 modes Wireless access to real-time instrument readings and alarm status from any location 3 Unmistakable five-way local and remote wireless notification of alarm conditions, including Man Down Alarm 3 Intelligent sensors store calibration data, so they can be swapped in the field 4 Continuous datalogging (up to 6 months for 5 sensors) and snapshot datalogging capabilities APPLICATIONS Confined space entry pre-screening Plant Shutdown (downstream) Personal Protection Leak detection MultiRAE Benzene used for leak detection COMPATIBLE

32 MultiRAE Benzene Wireless Portable Six-Gas Monitor With Benzene-Specific Measurement SPECIFICATIONS Instrument Specifications Size 7.6" H x 3.8" W x 2.6" D (193 x 96.5 x 66 mm) without RAE SepTube Cartridge Weight 31oz (880g) without RAE SepTube Cartridge Sensors More than 20 intelligent interchangeable field-replaceable sensors, including PID sensor for VOCs, electrochemical sensors for toxic gases, and oxygen and LEL sensor Battery Options, Runtime 5 and Recharge Time - Rechargeable Li-ion (~12-hr. runtime, < 6-hr. recharge time) - Extended-duration Li-ion (~18-hr. runtime, < 9-hr. recharge time) - Alkaline adapter with 4 x AA batteries (~6-hr. runtime) Display Monochrome graphical LCD display (128 x 160) with backlighting. Automatic screen flip feature. Display Readout - Real-time reading of gas concentrations; non-specific PID measurement ; Man Down Alarm on/off; visual compliance indicator; battery status; datalogging on/off; wireless on/off and reception quality. - STEL, TWA, peak, and minimum values - Benzene-specific snapshot measurement 2 Keypad Buttons 3 operation and programming keys (Mode, Y/+, and N/-) Sampling Built-in pump. Average flow rate: 250 cc/min. Auto shutoff in low-flow conditions Calibration Automatic with AutoRAE 2 Test and Calibration System or manual Alarms - Wireless remote alarm notification; audible (95 30 cm), vibration, visible (flashing bright red LEDs), and on-screen indication of alarm conditions - Man Down Alarm with pre-alarm and real-time remote wireless notification 3 Datalogging Continuous datalogging (6 months for 5 sensors at 1-minute intervals) - User-configurable datalogging intervals (from 1 to 3,600 seconds) - Snapshot datalogging Communication and Data Download - Data download, instrument set-up and upgrades on PC via desktop charging and PC communications cradle, travel charger, or AutoRAE 2 Automatic Test and Calibration System. - Wireless data and alarm status transmission via built-in RF modem (optional) Wireless Network ProRAE Guardian Real-Time Wireless Safety System or EchoView Host-based Closed-Loop System Wireless Range (Typical) MultiRAE to RAELink3 [Z1] Mesh modem ~330 feet (100 meters) MultiRAE to EchoView Host, RAEMesh Reader or RAEPoint ~660 feet (200 meters) Operating -4 to 122 F (-20 to 50 C) Temperature Humidity 0% to 95% relative humidity (non-condensing) Dust and Water IP-65 ingress protection rating Resistance Hazardous Location Approvals CSA: Class I, Division 1, Groups A, B, C and D, T4 Class II, Division 1; Groups E, F, G; T85 C ATEX: II 1G Ex ia IIC T4 Ga II 2G Ex ia d IIC T4 Gb with IR Sensor installed I M1 Ex ia I Ma IECEx: Ex ia IIC T4 Ga Ex ia d IIC T4 Gb with IR Sensor installed I M1 Ex ia I Ma EMC/RFI EMC directive: 2004/108/EC Performance Tests LEL CSA C22.2 No. 152; ISA Languages Arabic, Chinese, Czech, Danish, Dutch, English, French, German, Indonesian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Spanish, Swedish, and Turkish Warranty - Two years on non-consumable components and catalytic LEL, CO, H 2 S, and O 2 sensors - One year on all other sensors, pump, battery, and other consumable parts - 6 months on PID sensor Wireless Frequency ISM license-free band. IEEE Sub 1GHz Wireless Approvals FCC Part 15, CE R&TTE, Others 5 Radio Module Supports RM900A Sensor Specifications PID Sensors Range Resolution VOC 9.8eV 0 to 2,000 ppm 0.1 ppm Benzene-specific snapshot 2 0 to 200 ppm 0.1 ppm Combustible Sensors Range Resolution Catalytic LEL 0 to 100% LEL 1% LEL Electrochemical Sensors Range Resolution Ammonia (NH 3 ) 0 to 100 ppm 1 ppm Carbon Monoxide (CO) Carbon Monoxide (CO), Ext. Range Carbon Monoxide (CO), H 2 -comp. Carbon Monoxide (CO) + Hydrogen Sulfide (H 2 S) Combo 0 to 500 ppm 0 to 2,000 ppm 0 to 2,000 ppm 0 to 500 ppm 0 to 200 ppm 1 ppm 10 ppm 10 ppm 1 ppm 0.1 ppm Chlorine (Cl 2 ) 0 to 50 ppm 0.1 ppm Chlorine Dioxide (ClO 2 ) 0 to 1 ppm 0.03 ppm Ethylene Oxide (EtO-A) Ethylene Oxide (EtO-B) 0 to 100 ppm 0 to 10 ppm 0.5 ppm 0.1 ppm Formaldehyde (HCHO) 0 to 10 ppm 0.05 ppm Hydrogen Cyanide (HCN) 0 to 50 ppm 0.5 ppm Hydrogen Sulfide (H 2 S) 0 to 100 ppm 0.1 ppm Methyl Mercaptan (CH 3 -SH) 0 to 10 ppm 0.1 ppm Nitric Oxide (NO) 0 to 250 ppm 0.5 ppm Nitrogen Dioxide (NO 2 ) 0 to 20 ppm 0.1 ppm Oxygen (O 2 ) 0 to 30% Vol. 0.1% Vol. Phosphine (PH 3 ) 0 to 20 ppm 0.1 ppm Sulfur Dioxide (SO 2 ) 0 to 20 ppm 0.1 ppm 1 A two-gas combination sensor is required for a 6-gas configuration. 2 Requires Benzene RAE-Sep Tube Cartridge 3 Additional equipment and/or software licenses may be required to enable remote wireless monitoring and alarm transmission. 4 RAE Systems recommends calibrating sensors on installation. 5 Contact RAE Systems for country-specific wireless approvals and certificates. Specifications are subject to change. ORDERING INFORMATION Wireless 3 and non-wireless configurations are available Refer to the Portables Pricing Guide for part numbers for monitors, consumables (RAE-Sep Tube Cartridge), accessories, sampling and calibration kits, gas, sensors, and replacement parts CORPORATE HEADQUARTERS RAE Systems by Honeywell 3775 North First Street San Jose, CA USA RAE-InsideSales@honeywell.com DS WORLDWIDE SALES OFFICES USA/Canada Europe / Middle East China Asia Pacific

33 SensorRAE Portable Electrochemical Sensor Conditioning Station The SensorRAE is a compact waterproof conditioning station that keeps up to four RAE Systems interchangeable electrochemical (EC) sensors warmed up and ready for immediate installation, calibration, and use in RAE Systems MultiRAE Plus and AreaRAE monitors. The SensorRAE offers users of these monitors the ability to broaden the spectrum of detectable compounds by having four additional EC sensors readily available in addition to the four EC sensors installed in the instrument. Keeps sensors conditioned and ready to use Broadens the spectrum of detectable compounds accessible Convenient and easy to use Durable Low-maintenance Key Features Effective Conditions and maintains up to four interchangeable electrochemical (EC) sensors CO, H 2 S, SO 2, NO, NO 2, Cl 2, HCN, PH 3, and NH 3 interchangeable sensors are supported Broadens the spectrum of detectable compounds by maintaining four extra equilibrated EC sensors Supports the following RAE Systems products: MultiRAE Plus, MultiRAE IR, AreaRAE, AreaRAE Gamma, AreaRAE IAQ, SentryRAE, VRAE, QRAE Plus, and IAQRAE Convenient and Easy to Use Just plug the sensors into one of the four SensorRAE slots to condition Simply remove the sensor and install in monitor Truly portable the compact case fits in a pocket Clear lid permits view of available sensors Durable Sensors are protected by the rugged, waterproof Pelican case Low-Maintenance Long battery life. Four AAA batteries power the SensorRAE for at least 12 months Includes a battery test button with an LED indicator Applications Oil and Gas HazMat / Fire / First Response Industrial Civil Defense Environmental

34 SensorRAE Portable Electrochemical Sensor Conditioning Station Specifications * Size 5.4"x 4.0"x 2.1" (13.7 cm x 10.2 cm x 5.3 cm) Weight 10 oz (285 g) without sensors installed and with batteries Rating Waterproof Power 4 AAA alkaline batteries *Specifications are subject to change Corporate Headquarters RAE Systems by Honeywell 3775 North First Street San Jose, CA USA raesales@raesystems.com DS Worldwide Sales Offices USA/Canada Europe Middle East China Asia Pacific

35 SensorRAE 4R+ Portable Sensor Conditioning Station The compact, waterproof SensorRAE 4R+ sensor conditioning station keeps up to six extra sensors warmed up and ready for quick deployment in MultiRAE or ToxiRAE Pro monitors. The SensorRAE 4R+ keeps spare sensors on bias and readily available for use 1 without the extra warm-up time after installation required by sensors such as ethylene oxide or nitric oxide. The SensorRAE 4R+ intelligently applies bias to those sensors that need it and communicates sensor readiness status and battery levels with LED lights. The SensorRAE 4R+ also provides a convenient way to protect, carry, and store spare sensors. Allows users with just one multi-sensor detector to take advantage of a complete suite of RAE Systems 4R+ sensors Keeps sensors warmed up and readily available Waterproof rugged Pelican case fits in a pocket No maintenance required Key Features Holds up to six 4R+ sensors at a time Delivers six months of uninterrupted runtime on four standard AAA batteries Simple to use: just plug in the sensors Clearly communicates sensor readiness status and battery levels with LED lights Supports the following RAE Systems products: MultiRAE Lite MultiRAE MultiRAE Pro ToxiRAE Pro Applications Contractor Services HazMat Response RAE Systems-Authorized Distributors Equipment Rental Shops Military (CBRN Detection, EOD) 1 RAE Systems 4R+ intelligent sensors used in MultiRAE and ToxiRAE Pro instruments store calibration information, so if pre-calibrated, such sensors can be installed in respective instruments and used without calibration for go/no-go decisions. If maximum accuracy is required, however, it is strongly recommended that a sensor be calibrated anytime it is moved from the SensorRAE 4R+ to a RAE Systems monitor.

36 SensorRAE 4R+ Portable Sensor Conditioning Station Specifications Dimensions Weight Housing IP Rating Status Indication Batteries Battery Runtime 5.4" H x 4.0" W x 2.1" D (137 x 102 x 53 mm) 10 oz. (285 g) with batteries, without sensors installed Rugged Pelican case IP-67 (dust-tight and waterproof against temporary immersion) LED lights indicate readiness status of each sensor and battery levels. LEDs activate when the Test button is pressed 4 standard AAA batteries 6 months Ordering Information SensorRAE 4R+ Sensor Conditioning Station for up to six 4R+ electrochemical sensors. Part Number: T Pelican is a trademark of Pelican Products, Inc. Corporate Headquarters RAE Systems by Honeywell 3775 North First Street San Jose, CA USA raesales@raesystems.com DS Worldwide Sales Offices USA/Canada Europe Middle East China Asia Pacific

37 MiniRAE Lite Portable Handheld VOC Monitor The MiniRAE Lite is the most reliable handheld volatile organic compound (VOC) monitor on the market. Its photoionization detector s (PID) range of 0 to 5,000 ppm makes it an ideal instrument for applications ranging from environmental to construction. ADDITIONAL ADVANTAGES Duty-cycling lamp and sensor auto-cleaning technology Tough, flexible inlet Flexi-Probe Large keys are operable with 3 layers of gloves Strong, built-in sample pump draws up to 100' (30m) horizontally or vertically Loud, 95 db audible alarm Bright red flashing visible alarm Interchangeable drop-in Lithium-ion and alkaline battery packs 3-year 10.6 ev lamp warranty Accurate VOC monitoring Fastest response time (3 sec) Humidity compensation Easy to maintain and operate Three-year lamp warranty FEATURES & BENEFITS Proven PID technology The patented sensor provides the following unique features: 3-second response time Range up to 5,000 ppm Humidity compensation Six-month datalogging Designed for service Easy access to lamp and sensor in seconds without tools Big graphic display for easy overview of concentration Field-interchangeable battery pack, replaceable in seconds without tools Integrated flashlight for better visibility in low light Multi-language support with 12 languages encoded Rugged housing withstands use in harsh environments: IP-65 design Strong, protective removable rubber boot

38 MiniRAE Lite Specifications SENSOR SPECIFICATIONS GAS MONITOR RANGE RESOLUTION RESPONSE TIME VOCS 0 to ppm 0.1 ppm < 3 sec VOCS 1000 to 5,000 ppm 1 ppm < 3 sec MONITOR SPECIFICATIONS SIZE 10" L x 3.0" W x 2.5" H (25.5 x 7.6 x 6.4 cm) WEIGHT 26 oz (738 g) SENSORS Photoionization sensor with standard 10.6eV lamp BATTERY - Alkaline battery adapter - External field-replaceable lithium-ion battery pack, if specified OPERATING HOURS 12 hours of operation on alkaline battery adapter (12 hours with lithium-ion battery pack) DISPLAY GRAPHIC 4 lines, 28 x 43 mm, with LED back light KEYPAD 1 operation and 2 programming keys, 1 flashlight on/off Instantaneous reading of: DIRECT READOUT - VOCs as ppm by volume - High and low values - Date and time 95 db buzzer (at 30 cm) and flashing red LED to indicate exceeded preset limits - High: 3 beeps and flashes per second ALARMS - Low: 2 beeps and flashes per second - Alarm latching with manual override or automatic reset - Additional diagnostic alarm and display message for low battery and pump stall EMI/RFI - Highly resistant to EMI/RFI. - Compliant with EMC directive 89/336/EEC IP RATING IP-65 DATALOGGING Standard 6 months at one-minute intervals CALIBRATION Two-point calibration for zero and span SAMPLING PUMP - Internal, integrated flow rate at 400 cc/min - Sample from 100' (30m) horizontally and vertically LOW FLOW ALARM Auto shut-off pump at low-flow condition SAFETY CERTIFICATION ATEX II 2G EEx ia IIC T4 OPERATING TEMPERATURE -4 to 113 F (-20 to 50 C) HUMIDITY 0 to 95% relative humidity (non-condensing) ATTACHMENTS Durable green rubber boot WARRANTY 3 years for 10.6 ev lamp, 1 year for pump, battery and instrument Specifications are subject to change. MINIRAE LITE ORDERING OPTIONS Monitor only includes: MiniRAE Lite Monitor, Model PGM-7300 RAE Systems 10.6 ev UV lamp Flex-I-Probe External filter Green rubber boot Alkaline battery adapter Lamp cleaning kit Tool kit Lithium-ion (Li-ion) battery, if specified with universal AC/DC charger and international plug kit Travel charger, if specified Universal wall adapter, if specified Operation & Maintenance manual Soft leather carrying case Monitor with accessories kit adds: Hard transport case with pre-cut foam padding 5 Porous metal filters and O-rings Organic vapor zeroing kit Gas outlet port adapter and tubing Optional calibration kit adds: 100 ppm isobutylene calibration gas, 34L Calibration regulator and flow controller For more information Europe, Middle East, Africa Life Safety Distribution GmbH Tel: (Freephone number) Tel: (Alternative number) Middle East Tel: (Fixed Gas Detection) gasdetection@honeywell.com Americas Honeywell Analytics Distribution Inc. Tel: Toll free: detectgas@honeywell.com Honeywell RAE Systems Phone: Toll Free: Asia Pacific Honeywell Analytics Asia Pacific Tel: +82 (0) India Tel: China Tel: analytics.ap@honeywell.com Technical Services EMEA: HAexpert@honeywell.com US: ha.us.service@honeywell.com AP: ha.ap.service@honeywell.com Datasheet_MiniRAE_Lite_DS _EN 08/ Honeywell International Inc.

39 MiniRAE 3000 Portable Handheld VOC Monitor The MiniRAE 3000 is a comprehensive handheld VOC (Volatile Organic Compound) monitor that uses a third-generation patented PID technology to accurately measure more ionizable chemicals than any other device on the market. It provides full-range measurement from 0 to 15,000 ppm of VOCs. The MiniRAE 3000 has a built-in wireless modem that allows real-time data connectivity with the ProRAE Guardian command center located up to 2 miles (3 km) away through a Bluetooth connection to a RAELink 3 * portable modem or optionally via Mesh Network. Highly accurate VOC maeasurements Patented PID sensor Low maintenance easy access to lamp and sensor Low cost of ownership 3-year 10.6eV lamp warranty KEY FEATURES Third-generation patented PID technology VOC detection range from 0 to 15,000 ppm 3-second response time Humidity compensation with built-in humidity and temperature sensors Six-month datalogging Real-time wireless built-in Bluetooth (and optional RAELink3 portable modem) or Mesh Network support Large graphic display with integrated flashlight Multi-language support with 10 languages encoded IP- 67 waterproof design APPLICATIONS Oil and Gas HazMat Industrial Safety Civil Defense Environmental and Indoor Air Quality Workers can quickly measure VOCs and wirelessly transmit data via Bluetooth or optional Mesh radio. *RAELink 3 modem is sold separately.

40 MiniRAE 3000 Portable Handheld VOC Monitor SPECIFICATIONS Instrument Specifications Size Weight 26 oz (738 g) Sensors Battery Running time Display Graphic Keypad Direct Readout Alarms EMC/RFI IP Rating Datalogging Calibration Sampling Pump Low Flow Alarm Communication & Data Download Wireless Network Wireless Range (Typical) Safety Certifications 10" L x 3.0" W x 2.5" H (25.5 cm x 7.6 cm x 6.4 cm) Photoionization sensor with standard 10.6 ev or optional 9.8 ev or 11.7 ev lamp Rechargeable, external field-replaceable Lithium-Ion battery pack Alkaline battery adapter 16 hours of operation (12 hours with alkaline battery adapter) 4 lines, 28 x 43 mm, with LED backlight for enhanced display readability 1 operation and 2 programming keys, 1 flashlight on/off Instantaneous reading VOCs as ppm by volume (mg/m3) High values STEL and TWA Battery and shutdown voltage Date, time, temperature 95dB at 12" (30 cm) buzzer and flashing red LED to indicate exceeded preset limits High: 3 beeps and flashes per second Low: 2 beeps and flashes per second STEL and TWA: 1 beep and flash per second Alarms latching with manual override or automatic reset Additional diagnostic alarm and display message for low battery and pump stall Compliant with EMC directive (2004/108/EC) EMI and ESD test: 100MHz to 1GHz 30V/m, no alarm Contact: ±4kV Air: ±8kV, no alarm IP-67 unit off and without flexible probe IP-65 unit running Standard 6 months at one-minute intervals Two-point or three-point calibration for zero and span. Calibration memory for 8 calibration gases, alarm limits, span values and calibration dates Internal, integrated flow rate at 500 cc/mn Sample from 100' (30m) horizontally or vertically Auto pump shutoff at low-flow condition Download data and upload instrument set-up from PC through charging cradle or optional Bluetooth Wireless data transmission through built-in RF modem Mesh RAE Systems Dedicated Wireless Network EchoView Host: LOS > 660 ft (200 m) ProRAE Guardian & RAEMesh Reader: LOS > 660 ft (200 m) ProRAE Guardian & RAELink3 Mesh: LOS > 330 ft (100 m) US and Canada: CSA, Classified as Intrinsically Safe for use in Class I, Division 1 Groups A, B, C, D Europe: ATEX II 2G EEx ia IIC T4 Temperature -4 to 122 F (-20 to 50 C) Humidity 0% to 95% relative humidity (non-condensing) 1 Contact RAE Systems for country-specific wireless approvals and certificates. Specifications are subject to change. Attachments Warranty Wireless Frequency Sensor Specifications Gas Monitor Range Resolution Response Time T90 VOCs 0 to ppm 1,000 to 15,000 ppm MONITOR ONLY INCLUDES: Durable bright yellow rubber boot 3 years for 10.6 ev lamp, 1 year for pump, battery, sensor and instrument ISM license-free band. IEEE Sub 1GHz Wireless Approvals FCC Part 15, CE R&TTE, Others 1 Radio Module Supports Bluetooth or RM ppm 1 ppm MiniRAE 3000 Monitor, Model PGM-7320 Wireless communication module built in, as specified Datalogging with ProRAE Studio II Package Charging/download adapter RAE UV lamp, as specified Flex-I-Probe External filter Rubber boot Alkaline battery adapter Lamp-cleaning kit Tool kit Operation CD-ROM Operation and Maintenance manual Soft leather case OPTIONAL CALIBRATION KIT ADDS: 100 ppm isobutylene calibration gas, 34L Calibration regulator and flow controller OPTIONAL GUARANTEED COST-OF-OWNERSHIP PROGRAM: 4-year repair and replacement guarantee Annual maintenance service < 3 s < 3 s CORPORATE HEADQUARTERS RAE Systems by Honeywell 3775 North First Street San Jose, CA USA RAE-InsideSales@honeywell.com DS /16 WORLDWIDE SALES OFFICES USA/Canada Europe / Middle East China Asia Pacific

41 ppbrae 3000 Portable Handheld VOC Monitor The compact ppbrae 3000 is a comprehensive VOC gas monitor and datalogger for hazardous environments. The ppbrae 3000 is the most advanced handheld VOC monitor available for parts-per-billion detection. This third-generation patented PID device monitors VOCs using a photoionization detector with a 9.8 ev, 10.6 ev UV-discharge lamp. The built-in wireless modem allows real-time data connectivity with the ProRAE Guardian command center located up to two miles/3 km away (with optional RAELink3 portable modem) from the ppbrae 3000 detector. Accurate VOC measurement in all operating conditions Easy access to lamp and sensor in seconds without tools Patented sensor and lamp autocleaning reduces maintenance Monitors real-time readings and location of people Low Cost of Ownership: 3-year 10.6 ev lamp Warranty KEY FEATURES Proven PID Technology 3-second response time Extended range from 1 ppb to 10,000 ppm with best in class linearity Humidity compensation with integral humidity and temperature sensors Integrated Real-time wireless built-in Bluetooth (and optional RAELink3 portable modem) or Mesh Network support Integrated Correction Factors list of 220 compounds more than any other PID Includes flashlight for dark conditions Large graphic display presents gas type, Correction Factor and concentration Durable Easy access to battery, lamp and sensor in seconds without tools Rugged housing withstands use in harsh environments IP-67 waterproof design for easy cleaning and decontamination APPLICATIONS Oil & Gas HazMat Industrial Safety Civil Defense Environmental & Indoor Air Quality Workers can easily measure VOCs and wirelessly transmit readings up to two miles/3 km away.

42 ppbrae 3000 Portable Handheld VOC Monitor Specifications Detector Specifications Size Weight 26 oz (738 g) Sensors Battery Operating Hours Display Graphic Keypad Direct Readout Alarms EMI/RFI IP Rating Datalogging Calibration Sampling Pump Low Flow Alarm Communication & Data Download Wireless Network Wireless Range (Typical) Safety Certifications 10" L x 3.0" W x 2.5" H (25.5 cm x 7.6 cm x 6.4 cm) Photoionization sensor with standard 10.6 ev or optional 9.8 ev lamp Rechargeable, external field-replaceable Lithium-Ion battery pack Alkaline battery adapter 16 hours of operation (12 hours with alkaline battery) 4 lines, 28 x 43 mm, with LED backlight for enhanced display readability 1 operation and 2 programming keys, 1 flashlight on/off Instantaneous reading VOCs as ppm by volume or mg/m3 (3 in upper case for cubic) STEL, TWA and PEAK Battery and shutdown voltage Date, time, temperature 95 db (at 12"/30 cm) buzzer and flashing red LED to indicate exceeded preset limits High: 3 beeps and flashes per second Low: 2 beeps and flashes per second STEL and TWA: 1 beep and flash per second Alarms latching with manual override or automatic reset Additional alarm for low battery and pump stall Highly resistant to EMI/RFI Compliant with EMC Directive 89/336/EEC IP-67 unit off and without flexible probe IP-65 unit running Standard 6 months at one-minute intervals Two-point or three-point calibration for zero and span Calibration memory for 8 calibration gases Internal, integrated flow rate at 500 cc/mn Sample from 100' (30m) horizontally and vertically Auto pump shutoff at low-flow condition Download data and upload instrument set-up from PC through charging cradle or optional Bluetooth Wireless data transmission through built-in RF modem Mesh RAE Systems Dedicated Wireless Network EchoView Host: LOS > 660 ft (200 m) ProRAE Guardian & RAEMesh Reader: LOS > 660 ft (200 m) ProRAE Guardian & RAELink3 Mesh: LOS > 330 ft (100 m) US and Canada: UL, cul, Classified as Intrinsically Safe for use in Class I, Division 1 Groups A, B, C, D Europe: ATEX Ex II 2GEx ia IIC/IIB T4 IECEx: Ex ia IIC/IIB T4 Temperature -4 to 113 F (-20 to 50 C) Humidity Attachments Warranty Wireless Frequency 0% to 95% relative humidity (non-condensing) Durable black rubber boot with straps 3-year warranty for 10.6 ev lamp, 1 year for pump, battery, and instrument ISM license-free band. IEEE Sub 1GHz Wireless Approvals FCC Part 15, CE R&TTE, Others 1 Radio Module Supports Bluetooth or RM900 1 Contact RAE Systems for country-specific wireless approvals and certificates. Specifications are subject to change. CORPORATE HEADQUARTERS RAE Systems by Honeywell 3775 North First Street San Jose, CA USA RAE-InsideSales@honeywell.com DS /16 WORLDWIDE SALES OFFICES USA/Canada Europe / Middle East China Asia Pacific Sensor Specifications Gas Monitor Range Resolution VOCs 0 to 9999 ppb 10 to 99 ppm 100 to 999 ppm 1000 to 9999 ppm 1 ppb 0.01 ppm 0.1 ppm 1 ppm Response Time T90 < 3 s < 3 s < 3 s < 3 s Monitor only includes: ppbrae 3000 Monitor, with RAE Systems UV lamp, as specified Datalogging with ProRAE Studio II Charging/download adapter VOC Zeroing Tubes (1 box) Tube adapter Tedlar bag for calibration Flex-I-Probe External filter Rubber boot with straps Alkaline battery adapter Lamp-cleaning and tool kit Operation CDROM Operation & Maintenance manual Soft leather case Monitor with accessories kit adds: Hard transport case with pre-cut foam padding Charging/download cradle 5 Porous metal filters and O-rings Organic vapor zeroing kit Gas outlet port adapter and tubing Optional calibration kit adds: 10 ppm isobutylene calibration gas, 34L Calibration regulator and flow controller Optional Guaranteed Cost of Ownership Program: 4-year repair and replacement guarantee Annual maintenance service

43 UltraRAE 3000 Portable Handheld Compound-Specific VOC Monitor The UltraRAE 3000 is the most advanced Compound-Specific Monitor on the market. Its Photoionization Detector s (PID) extended range of 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene-specific mode makes it an ideal instrument for applications, from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring. KEY FEATURES Proven PID technology 3-second response in VOC mode or 60 seconds in compound-specific mode Extended range up to 10,000 ppm (in VOC mode) with improved linearity Built-in humidity sensor Automatic temperature-controlled sampling time calculation Highly specific readings, combining a 9.8eV UV lamp and RAE-Sep benzene tube New sampling probe design provides instant tube-breakthrough visibility Versatile VOC or Benzene-Specific modes Real-time wireless built-in Bluetooth (and optional RAELink3 portable modem) or Mesh Network support Integrated RAE Systems Correction Factors list for more than 200 compounds Easy to Use Large graphic display Multi-language support Easy access to lamp, sensor and battery in seconds without tools Low Cost of Ownership Inexpensive analysis using low-cost RAE-Sep tubes Applications Confined space entry pre-screening during refinery and plant maintenance Hazardous material response Marine spill response Refinery down-stream monitoring Plant overhaul Dual detection mode for total benzene exposure assessment: 60-second snapshot or 15-minute STEL measurement High sensitivity to benzene (as low as 50 ppb) provides a lower detection range for future benzene exposure limits Lower risk of false alarms through advanced speciation method Total VOC measurement mode with extended range of 0.05 to 10,000 ppm Workers can easily and quickly obtain VOC readings anywhere in the facility with the RAE Systems UltraRAE 3000

44 UltraRAE3000 Portable Handheld Compound-Specific VOC Monitor SPECIFICATIONS Monitor Specifications Size Weight 26 oz (738 g) Sensors Battery Operating Hours Display Graphic Keypad Direct Readout Alarms EMC/RFI IP Rating Datalogging Calibration Sampling Pump Low Flow Alarm Communication & Data Download Wireless Network DS /16 10" L x 3.0" W x 2.5" H (25.5 x 7.6 x 6.4 cm) Photoionization sensor with standard 9.8 ev or optional 10.6 ev or 11.7 ev lamps Rechargeable, external field-replaceable lithium-ion battery pack Alkaline battery adapter 16 hours of operation 4 lines, 28 x 43mm 1 operation and 2 programming keys, 1 flashlight on/off button VOCs as ppm by volume High and low values STEL and TWA Battery and shutdown voltage Date, time, temperature 95dB buzzer (at 12"/30 cm) and flashing red LED to indicate exceeded preset limits High: 3 beeps and flashes per second Low: 2 beeps and flashes per second STEL and TWA: 1 beep and flash per second Alarms latching with manual override or automatic reset Additional diagnostic alarm and display message for low battery and pump stall Compliant with EMC directive (2004/108/EC) EMI and ESD test: 100MHz to 1GHz 30V/m, no alarm Contact: ±4kV Air: ±8kV, no alarm IP-65, unit running Standard 6 months at one-minute intervals 2-point or 3-point calibration for zero and span. Calibration memory for 8 calibration gases, alarm limits, span values and calibration dates Internal, integrated flow rate at 400 cc/min Sample from 100' (30m) horizontally and vertically Auto shut-off pump at low-flow condition Download data and upload instrument set-up from PC through charging cradle or optional Bluetooth Wireless data transmission through built-in RF modem Mesh RAE Systems Dedicated Wireless Network Wireless Range (Typical) EchoView Host: LOS > 660 ft (200 m) ProRAE Guardian & RAEMesh Reader: LOS > 660 ft (200 m) ProRAE Guardian & RAELink3 Mesh: LOS > 330 ft (100 m) Safety Certifications US and Canada:, Classified as Intrinsically Safe for use in Class I, Division 1 Groups A, B, C, D. Europe: ATEX II 2G EEx ia IIC T4 IECEx CSA Ex ia IIC/IIB GbT4 Operating Temperature -4 to 122 F (-20 to 50 C) Humidity Attachments Warranty Wireless Frequency 0% to 95% relative humidity (non-condensing) Durable bright red rubber boot 3 years for 10.6 ev lamp, 1 year for 9.8. ev lamp, pump, battery, sensor and instrument ISM license-free band. IEEE Sub 1GHz Wireless Approvals FCC Part 15, CE R&TTE, Others 1 Radio Module Supports Bluetooth or RM900 1 Contact RAE Systems for country-specific wireless approvals and certificates. Specifications are subject to change CORPORATE HEADQUARTERS RAE Systems by Honeywell 3775 North First Street San Jose, CA USA RAE-InsideSales@honeywell.com WORLDWIDE SALES OFFICES USA/Canada Europe / Middle East China Asia Pacific Sensor Specifications Gas Monitor Range Resolution Response Time (T90) VOCs 0 to ppm ppm < 3 sec ULTRARAE 3000 ORDERING OPTIONS Monitor Only Includes UltraRAE 3000 Monitor, Model PGM-7360 Wireless communication module built-in Datalogging with ProRAE Studio II Package for Windows XP, Windows Vista, or Windows 7 Travel Charger RAE UV lamp and RAE-Sep Tubes Flex-I-Probe and short probe External filter Red rubber boot Alkaline battery adapter Lamp-cleaning kit Tool kit Lithium-ion (Li-Ion) battery with universal AC/DC charger and international plug kit Operation CD-ROM Operation & Maintenance manual Soft leather carrying case Monitor with Accessories Kit Hard transport case with pre-cut foam padding Charging/download cradle 5 porous metal filters and O-rings Organic vapor zeroing kit Gas outlet port adapter and tubing Optional Calibration Kit Calibration gas, 34L, as specified Calibration regulator and flow controller Optional Guaranteed Cost of Ownership Program 4-year repair and replacement guarantee Annual maintenance service Ordering Information 100 to ppm 0.1 ppm < 3 sec 1000 to 9999 ppm 1 ppm < 3 sec Benzene 0 to 200 ppm ppm < 60 sec Butadiene 0 to 200 ppm ppm < 60 sec Monitor with Accessories and Calibration Kit (PN 059-D )

45 AutoRAE 2 Automatic Test and Calibration System The AutoRAE 2 Automatic Test and Calibration System for Honeywell RAE Systems portable monitors makes instrument testing and calibration compliance as easy as pressing a button. Simply cradle the monitor, and the system takes care of calibration, testing, and battery recharging. The AutoRAE 2 system is flexible and modular, and can be configured to efficiently meet your calibration and records management requirements. An AutoRAE 2 system can be as simple as a single cradle deployed in stand-alone mode to calibrate one instrument at a time, or as powerful as a networked, controller-based system supporting 10 instrument cradles and 5 distinct calibration gases or gas mixtures. Easy, one-touch bump testing, calibration, charging, and records management Supports a wide variety of gases, including exotics Optimized for field use does not require a computer to operate Firmware-upgradeable to protect your investment INDUSTRIES Oil and Gas Industrial Environmental Fire Service National Security An AutoRAE2 system configured with all cradle types. The high-resolution color display on the controller provides a rich, intuitive user experience. FEATURES & BENEFITS Automatic testing, calibration, charging system Deployable as a stand-alone cradle or a controller-based system with up to 10 cradles Controller with a large, color LCD display Networking capability Up to 5 calibration gas cylinders can be connected at the same time* Automatic instrument FW update option Instruments datalogging file recorded automatically on controller SD card Bench-top or wall-mounted use Instruments supported: - ToxiRAE Pro Series - QRAE3, MicroRAE - MultiRAE Series (except diffusion model) Single Cradle for all Handheld PID, QRAE 3 and ToxiRAE Pro family instruments Device Management with Honeywell Sotera * Supported only on configurations that include the AutoRAE 2 Controller