SUPPLEMENTAL INFORMATION SHEET FOR QPL SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST
|
|
- Deirdre Melton
- 5 years ago
- Views:
Transcription
1 SUPPLEMENTAL INFORMATION SHEET FOR QPL QUALIFICATIONS HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TESTING -3 5 September 2013 SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-I INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, GENERAL SPECIFICATION FOR This list has been prepared for use by or for the Government in the acquisition of products covered by the subject non-government standard and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest adopted issue of the applicable non-government standard. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the manufacturer from compliance with the non-government standard requirements. The activity responsible for this qualified products list and for qualification approval is the Naval Air Systems Command, AIR , Shaw Rd., Building 1461, Patuxent River, Maryland Manufacturer s full name, cage number, office and plant addresses are listed at the end of this QPL. THIS DOCUMENT IS AN OFFICIAL SUPPLEMENTAL INFORMATION SHEET OF THE PRODUCTS TRANSFORMED TO AN EQUIVALENT QUALIFICATION DATA SET (QDS). USERS OF THIS DOCUMENT MUST VISIT THE QUALIFIED PRODUCTS DATABASE (QPD) TO VERIFY QUALIFICATION INFORMATION. PLEASE VISIT TO ACCESS INFORMATION. YOU MUST HAVE A USERNAME AND PASSWORD TO ENTER SITE. ONCE LOGGED IN CHOOSE QPD FROM THE SIDE MENU. YOU CAN SEARCH BY QPL NUMBER, DOCUMENT NUMBER, GOVERNING SPEC, TITLE, FSC, GOVERNMENT, NON-GOVERNMENT (NGS AMSC N/A 1 FSC 5120
2 NAME MIL-I-81969/1, INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE III, CLASS 2, COMPOSITION C. M81969/1-01 AUM1-01 Aiconics, Inc. -02 AUM AUM AA/ AUM1-04 M81969/ Tyco Electronics-AMP (2) AA/ MIL-I-81969/2, INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE I, CLASS 1, COMPOSITION C. M81969/2-01 ATML 0201 Astro Tool Corp. -02 ATML ATML AA/ ATML 0204 M81969/2-01 DAK126-23A Daniels Manufacturing Corp. -02 DAK126-20A -03 DAK126-16A AA/ DAK126-12A MIL-I-81969/3, INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE II, CLASS 1, COMPOSITION C. M81969/3-01 ATM 0301 Astro Tool Corp. L thru thru AA/
3 NAME M81969/3-01 DRK129-23A Daniels Manufacturing Corp A A AA/ A -05 DRK125-23A A A A MIL-I-81969/6, INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, (TYPE CR CONNECTOR) TYPE II, CLASS 1, COMPOSITION A. M81969/ Tyco Electronics-AMP (1) AA/ MIL-I-81969/8, INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPES I AND II, CLASS 2, COMPOSITION A. M81969/8-01 ATML 0801B Astro Tool Corp. -02 ATML 0802B -03 ATML 0803B AA/ ATML 0804B -05 ATML 0805B -06 ATML 0806B -07 ATML 0807B -08 ATML 0808B -09 ATML 0809B -10 ATML 0810B -11 ATML 0811B -12 ATML 0812B -13 ATML 0813B -14 ATML 0814B -205 ATML 08205B -206 ATML 08206B M81969/8-207 ATML 08207B Astro Tool Corp. 3
4 NAME -208 ATML 08208B (Continued) -209 ATML 08209B -210 ATML 08210B AA/ M81969/8-01 DAK95-22MB Daniels Manufacturing Corp. -02 DRK95-22MB -03 DAK95-22B AA/ DRK95-22B -05 DAK95-20B -06 DRK95-20B -07 DAK95-16B -08 DRK95-16B -09 DAK95-12B -10 DRK95-12B -11 DAK95-10B -12 DRK95-10B -13 DAK95-8B -14 DRK95-8B -205 DAK83-20B -206 DRK83-20B -207 DAK83-16B -208 DRK83-16B -209 DAK83-12B -210 DRK83-12B MIL-I-81969/9, INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE II, CLASS 1, COMPOSITION A. M81969/ Tyco Electronics-AMP (1) AA/ MIL-I-81969/14, INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE III, CLASS 2, COMPOSITION B. 4
5 NAME M81969/14-01 AUM14-01 Aiconics, Inc. -03 AUM AUM AA/ AUM AUM AUM AUM AUM AUM14-12 M81969/ D Amphenol Aerospace Bendix Corporation AF/ M81969/ Amphenol Aerospace Bendix Connectors AE/ M81969/14-01 IRT-22D-GW Amphenol Interconnect India -03 IRT-16-BW AA/ IRT-20-RW M81969/ Tyco Electronics-AMP (2) AA/ MIL-I-81969/16, INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE III, CLASS 1, COMPOSITION B. 5
6 GOVERNMENT NAME M81969/ Deutsch Engineered Connecting Devices AA/ MIL-I-81969/17, INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE I, CLASS 1, COMPOSITION C. M81969/17-03 ATML 1703B Astro Tool Corp. -04 ATML 1704B -05 ATML 1705B AA/ ATML 1706B -07 ATML 1707B -08 ATML 1708B -09 ATML 1709B M81969/17-03 DAK20B Daniels Manufacturing Corp. -04 DAK16B -05 DAK12B AA/ DAK55-8B -07 DAK55-4B -08 DAK55-0B -09 DAK83S-20 MIL-I-81969/18, INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE I, CLASS 1, COMPOSITION C. M81969/18-01 DAK123A Daniels Manufacturing Corp. -02 DAK123-22A AA/ MIL-I-81969/19, INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE II, CLASS 1, COMPOSITION C. M81969/19-01 ATML 1901B Astro Tool Corp. 6
7 NAME -02 ATML 1902B -03 ATML 1903B AA/ ATML 1904B -05 ATML 1905B -06 ATML 1906B -10 ATML 1910B -11 ATML 1911B M81969/19-01 DRK16B Daniels Manufacturing Corp. -02 DRK12B -03 DRK56-8B AA/ DRK56-4B -05 DRK56-0B -06 DRK20B -10 DHK20B -11 DHK16B MIL-I-81969/20, INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE II, CLASS 1, COMPOSITION A. M81969/20-01 DRK124A Daniels Manufacturing Corp. -02 DRK124-22A AA/ MIL-I-81969/30, INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE II, CLASS 2, COMPOSITION C. M81969/30-05 DRK505B Daniels Manufacturing Corp. -06 DRK506B -07 DRK507B AA/ DRK508B M81969/30-09 DRK509B Daniels Manufacturing Corp. -10 DRK510B (Continued) -11 DRK511B AA/ DRK512B -13 DRK513B 7
8 NAME -20 DRK520B -25 DRK525B -26 DRK526B -27 DRK527B -28 DRK528B -29 DRK529B -30 DRK530B -31 DRK531B -32 DRK532B -33 DRK533B -35 DRK535B -36 DRK536B MIL-I-81969/33, INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE I, CLASS 1, COMPOSITION A (FOR USE WITH MIL-C-28840(EC) CONNECTORS). M81969/33-01 DAK55-22SA Daniels Manufacturing Corp. -02 DAK55-22JA AA/ MIL-I-81969/34, INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE II, CLASS 1, COMPOSITION A (FOR USE WITH MIL-C-28840(EC) CONNECTORS). M81969/34-01 DRK56-22A Daniels Manufacturing Corp AA/ MIL-I-81969/39, INSTALLING AND REMOVAL TOOL, CONNECTOR ELECTRICAL CONTACT, TYPE III, CLASS 2, COMPOSITION B. M819639/39-01 AUM39-01 Aiconics, Inc. 8
9 NAME AA/
10 NAME, ADDRESS AND PLANT CAGE NUMBER NAME, ADDRESS AND PLANT CAGE NUMBER Aiconics, Inc. OEUH6 Deutsch Engineered Paine Place Connecting Devices Poway, CA Eddie Jones Way Oceanside, CA Amphenol Aerospace Corp Tyco Electronics-AMP Bendix Connectors 2901 Fulling Mill Road Delaware Street Middletown, PA Sidney, NY Plants: TE Connectivity A venue Obrero (1) Mundial No.9 Parque Industrial SF116 Dynatech, C.P Hermosillo, Sonora, Mexico. Amphenol Interconnect India Pvt. Ltd. 105, Bhosari Industrial Area Pune India Astro Tool Corporation SW Tualatin Valley Hwy Beaverton, OR Tyco Electronics-AMP (2) 1250 East Main Street Mount Joy, PA Daniels Manufacturing Corp Thorpe Road Orlando, FL
11 10
SUPPLEMENTAL INFORMATION SHEET FOR QPL SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST
SUPPLEMENTAL INFORMATION SHEET FOR QPL 22520 QUALIFICATIONS HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TESTING QPL-22520-3 10 April 2012 SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS
More informationSUPPLEMENTAL INFORMATION SHEET FOR QPL SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST
SUPPLEMENTAL INFORMATION SHEET FOR QPL 83519 S HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TESTING QPL-83519-4 3 March 2016 SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST OF PRODUCTS
More informationSUPPLEMENTAL INFORMATION SHEET FOR QPL SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST
SUPPLEMENTAL INFORMATION SHEET FOR QPL 83519 S HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TESTING QPL-83519-6 10 October 2017 SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST OF
More informationSUPPLEMENTAL INFORMATION SHEET FOR QPL SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST
SUPPLEMENTAL INFORMATION SHEET FOR QPL 85485 QUALIFICATIONS HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TESTING -6 16 Sept 2014 SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST OF
More informationSUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER SAE AEROSPACE STANDARD AS7928
SUPPLEMENTAL INFORMATION SHEET FOR QPL 7928 QUALIFICATIONS HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TESTING -13 3 March 2016 SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST OF
More informationThe activity responsible for this QPL is the Defense Supply Center Columbus (DSCC-VQ), Columbus, OH
S VALIDATED EVERY 12 MONTHS 09-Aug-00 SUPERSEDING QPL-83517-12 25-Sep-96 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-C-83517 CONNECTOR, COAXIAL, RADIO FREQUENCY FOR COAXIAL,
More informationTHE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE SUPPLY CENTER COLUMBUS (DSCC-VQ), COLUMBUS, OH TEST OR QUALIFICATION REFERENCE
S VALIDATED EVERY 12 MONTHS 28-Apr-00 SUPERSEDING QPL-49142-14 17-Sep-99 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-49142 CONNECTOR, TRIAXIAL, RADIOFREQUENCY
More informationTHE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE SUPPLY CENTER COLUMBUS (DSCC-VQ), COLUMBUS, OH TEST OR QUALIFICATION REFERENCE
S VALIDATED EVERY TWO YEARS 25-Jan-05 SUPERSEDING QPL-AS1339-22 26-Oct-04 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER SAE AEROSPACE STANDARD SAE-AS1339 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC
More informationTHE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE SUPPLY CENTER COLUMBUS (DSCC-VQ), COLUMBUS, OH TEST OR QUALIFICATION REFERENCE
S VALIDATED EVERY 12 MONTHS 11-Jun-02 SUPERSEDING QPL-AS1339-13 06-May-02 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER SAE AEROSPACE STANDARD SAE-AS1339 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC
More informationSEMIANNUALLY 29 November 1996 SUPERSEDING QPL September 1996 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION
QUALIFICATIONS VALIDATED SEMIANNUALLY 29 November 1996 SUPERSEDING QPL-15733-95 18 September 1996 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-F-15733 FILTERS AND CAPACITORS,
More informationSEMIANNUALLY 29 November 1996 SUPERSEDING QPL-l May 1996 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION
QUALIFICATIONS VALIDATED QPL-l9978-58 SEMIANNUALLY 29 November 1996 SUPERSEDING QPL-l9978-57 30 May 1996 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-C-l9978 CAPACITORS,
More informationThe activity responsible for this QPL is the Defense Supply Center Columbus (DSCC-VQ), Columbus, OH TEST OR QUALIFICATION REFERENCE -1-
S VALIDATED SEMIANNUALLY 01-Jun-00 SUPERSEDING QPL-15733-100 14-Jun-99 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-15733 FILTERS AND CAPACITORS, RADIO FREQUENCY
More informationDLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-81381
Specification Details: Specification: MIL-DTL-81381 Title: Wire, Electrical, Polyimide-Insulated Copper or Copper Alloy Federal Supply Class (FSC): 6145 Conventional: Yes Specification contains quality
More informationDLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-55302
Specification Details: Specification: MIL-DTL-55302 Title: Connectors, Printed Circuit Subassembly and Accessories Federal Supply Class (FSC): 5935 Conventional: Yes Specification contains quality assurance
More informationQUALIFICATIONS VALIDATED QML ANNUALLY 12 February 1998 SUPERSEDING QML November 1997 QUALIFIED MANUFACTURERS LIST
QUALIFICATIONS VALIDATED QML-31032-4 ANNUALLY 12 February 1998 SUPERSEDING QML-31032-3 21 November 1997 QUALIFIED S LIST OF DEPARTMENT OF DEFENSE PERFORMANCE SPECIFICATION MIL-PRF-31032 PRINTED CIRCUIT
More informationDETAIL SPECIFICATION SHEET
DETAIL SPECIFICATION SHEET INCH-POUND MIL-DTL-83521/5A 21 March 2018 SUPERSEDING MIL-M-83521/5 5 August 1985 MAINTENANCE KITS, ELECTRICAL CONNECTORS, CONTACTS AND CONNECTOR AND CABLE ACCESSORIES: MAINTENANCE
More informationDETAIL SPECIFICATION
INCH - POUND MIL-DTL-38999L 10 May 2012 SUPERSEDING SUPPLEMENT 1 30 May 2008 DETAIL SPECIFICATION CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH
More informationANNUALLY 25 July 2002 SUPERSEDING QML March 2002 QUALIFIED MANUFACTURERS LIST PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION
QUALIFICATIONS VALIDATED ANNUALLY 25 July 2002 SUPERSEDING QML-31032-11 19 March 2002 QUALIFIED S LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-31032 PRINTED CIRCUIT BOARD / PRINTED
More informationMar11 Rev B
Product Specification 108-1576-2 11Mar11 Rev B NETCONNECT*, CHAMP* System 5 Modular Jack Patch Panel 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for NETCONNECT*
More informationDETAIL SPECIFICATION
INCH-POUND MIL-DTL-38999M 11 February 2015 DETAIL SPECIFICATION CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, OR BREECH COUPLING), ENVIRONMENT RESISTANT
More informationANNUALLY 25 November 1998 SUPERSEDING QML February 1998 QUALIFIED MANUFACTURERS LIST DEPARTMENT OF DEFENSE PERFORMANCE SPECIFICATION
QUALIFICATIONS VALIDATED QML-31032-5 ANNUALLY 25 November 1998 SUPERSEDING QML-31032-4 12 February 1998 QUALIFIED S LIST OF DEPARTMENT OF DEFENSE PERFORMANCE SPECIFICATION MIL-PRF-31032 PRINTED CIRCUIT
More informationAerospace & Defence. Capabilities and Line Card. arrow.com
Aerospace & Defence Capabilities and Line Card arrow.com Aerospace and Defence The workings of the bicycle made way for the first flying machine. A spaceship was built on the ground piece by piece before
More informationJun08 Rev C
Product Specification Connector, Card Edge,.050 Centerline 108-14034 02Jun08 Rev C 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for Tyco Electronics.050 centerline
More informationTHE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE SUPPLY CENTER COLUMBUS (DSCC-VQ), COLUMBUS, OH , telephone (614)
QUALIFICATIONS VALIDATED EVERY 12 MONTHS 27-Oct-03 SUPERSEDING QPL-50884-53 15-Jan-03 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-P-50884 PRINTED WIRING BOARD, FLEXIBLE
More informationSEMIANNUALLY 22 May 2001 SUPERSEDING QPL July 1997 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-39005
QUALIFICATIONS VALIDATED SEMIANNUALLY 22 May 2001 SUPERSEDING QPL-39005-58 9 July 1997 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-39005 RESISTORS, FIXED, WIRE-WOUND
More informationAerospace & Defense. Capabilities and Line Card. arrow.com
Aerospace & Defense Capabilities and Line Card arrow.com Aerospace and Defense The workings of the bicycle made way for the first flying machine. A spaceship was built on the ground piece by piece before
More informationJan05 Rev A EC
Product Specification Two Circuit Heavy Duty Burner Connector 108-1056 12Jan05 Rev A EC 0990-0059-05 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the
More informationTHE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE SUPPLY CENTER COLUMBUS (DSCC-VQ), COLUMBUS, OH , telephone (614)
QUALIFICATIONS VALIDATED EVERY 12 MONTHS 17-Jul-00 SUPERSEDING QPL-50884-44 15-Jun-00 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-P-50884 PRINTED WIRING BOARD, FLEXIBLE
More informationTHE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE SUPPLY CENTER COLUMBUS (DSCC-VQ), COLUMBUS, OH , telephone (614)
QUALIFICATIONS VALIDATED EVERY 12 MONTHS 10-Jul-02 SUPERSEDING QPL-50884-51 21-Mar-02 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-P-50884 PRINTED WIRING BOARD, FLEXIBLE
More informationMar11 Rev C
Product Specification 108-1441 11Mar11 Rev C Connector, Z-PACK*, 2 mm FB, Signal and Power 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the Z-PACK* 2mm
More informationTHE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE SUPPLY CENTER COLUMBUS (DSCC-VQ), COLUMBUS, OH , telephone (614)
QUALIFICATIONS VALIDATED EVERY 12 MONTHS 20-Nov-01 SUPERSEDING QPL-50884-49 10-Jul-01 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-P-50884 PRINTED WIRING BOARD, FLEXIBLE
More informationIntroducing SlimSeal SSL Connector
Introducing SlimSeal SSL Connector The SlimSeal SSL connectors are low profile, single row connectors developed for indoor and outdoor LED lighting applications. These connectors provide low power, sealed
More informationTwo Circuit Heavy Duty Burner Connector
Product 108-1056 11 Oct.16 Rev B Specification EC 0990-0059-05 Two Circuit Heavy Duty Burner Connector 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the
More informationDETAIL SPECIFICATION. EXTINGUISHER, FIRE, HALOCARBON (HFC-236fa), PORTABLE, WITH MOUNTING BRACKET, FOR AVIATION USE
INCH-POUND 15 March 2007 DETAIL SPECIFICATION EXTINGUISHER, FIRE, HALOCARBON (HFC-236fa), PORTABLE, WITH MOUNTING BRACKET, FOR AVIATION USE This specification is approved for use by the Naval Air Systems
More informationhttps://www.te.com/commerce/pcnws/pcnforms?pcndate=03-jul-2012&...
Page 1 of 12 CURRENT DATE: 28-JANUARY-2014 TE CONNECTIVITY PRODUCT CHANGE NOTIFICATION NO: E-12-011457 PCN DATE: 03-JUL-2012 PRODUCT CHANGE NOTIFICATION We would like to inform you about the following
More informationFIRE ALARM SYSTEM INSPECTION
13555 Wellington Center Circle Suite 123 Gainesville, VA 20155 T: 1-888-883-2867 F: 703-468-6070 www.vectorsecurity.com FIRE ALARM SYSTEM INSPECTION Upon arrival, contact Vector Security Service Dept.
More informationCII FCAC-150 Series Relay
Introducing CII Series Relay 50 Amps, 1PST/NO (DM) CII Series Relay 50 Amps, 1PST/NO (DM) with 1PDT Auxiliary Contacts KEY FEATURES Non-latching relay Balanced force design Corrosion protected metal enclosure
More informationProcedure. for. Installation. of the P/N & P/N Voice Alert Systems. Procedure IP 1 Rev. 1. Date
Procedure for Installation of the P/N 2040 1 2 & P/N 2040 1 3 Voice Alert Systems Procedure IP 1 Rev. 1 Date 04 16 03 Approved By Aircraft Components inc. 1040 Harbor Lake Dr. Safety Harbor FL 34695 I.
More informationTHE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE SUPPLY CENTER COLUMBUS (DSCC-VQ), COLUMBUS, OH , telephone (614)
QUALIFICATIONS VALIDATED EVERY 12 MONTHS 09-Dec-99 SUPERSEDING QPL-50884-41 25-Nov-98 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-P-50884 PRINTED WIRING, FLEXIBLE AND
More informationFree Height 0.8 mm Pitch Board-to-Board Connector (SMT)
Product 108-5390 Specification 31 OCT 17 Rev.F1 Free Height 0.8 mm Pitch Board-to-Board Connector (SMT) 1. SCOPE 1.1. Contents This specification covers the requirements for product performance, test methods
More informationDTS SERIES CONNECTORS
DEUTSCH DTS SERIES CONNECTORS FOR MIL-DTL-38999 SERIES III RUGGED, HARSH ENVIRONMENT SUBMINIATURE CONNECTORS TE DEUTSCH MIL-DTL-38999 SERIES III CONNECTORS QUICK REFERENCE GUIDE Wide Range Mil spec, commercial,
More informationYour Partner for Custom Interconnectivity Solutions. ISO 9001:2008 AS9100C:2009 ISO 13485:2003 ISO 17025:2005 Qualified
Your Partner for Custom Interconnectivity Solutions ISO 9001:2008 AS9100C:2009 ISO 13485:2003 ISO 17025:2005 Qualified LEMO Precision Custom Connection Solutions The Original Push-Pull Connector Seven
More informationInsulated High Temperature Hook-Up Wire; Types ET (250 Volts), E (600 Volts), and EE (1000 Volts)
ANSI/NEMA HP 3-2012 Revision of ANSI/NEMA HP 3-2001 American National Standard Insulated High Temperature Hook-Up Wire; Types ET (250 Volts), E (600 Volts), and EE (1000 Volts) Secretariat: National Electrical
More informationDLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-5757
Specification Details: Specification: MIL-R-5757 Title: Relay, Electromagnetic Federal Supply Class (FSC): 5945 Conventional: Yes Specification contains quality assurance program: No MIL-STD-790 Established
More informationJun08 Rev A
Product Specification Terminal Block Crimp Snap Plug Assembly 108-2319 09Jun08 Rev A 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the Tyco Electronics
More informationKALLISTA ELECTRONICS LTD
KALLISTA ELECTRONICS LTD Connectors & Electromechanical Products from the World s Leading Manufacturers Kallista Electronics Ltd, Naldred Farm Offices, Borde Hill Lane, Haywards Heath, West Sussex, RH16
More informationEVERCLEAR Mini Multi-Lane High Speed Interconnects & Cable Assemblies
EVERCLEAR Mini Multi-Lane High Speed Interconnects & Cable Assemblies APPLICATIONS High Speed I/O Multiple Channels Interconnects Switches for Fibre Channel and InfiniBand Standards TECHNICAL DOCUMENTS
More informationWire and Cable The Industry Standard for Rugged, Reliable Performance
Wire and Cable The Industry Standard for Rugged, Reliable Performance TE Connectivity A Powerful Source Pushing the Performance Envelope As one of the world s largest suppliers of passive electronic components
More informationIntroducing Hermaphroditic Blade and Receptacle Connector
Introducing Hermaphroditic Blade and Receptacle Connector Wire-to-Board, Board-to-Board and Dust Cover Hermaphroditic Blade and Receptacle Connector : Wire-to-Board KEY FEATURES Available in 2, 4, and
More informationMODULAR CONNECTOR 154 (58 AND 96) POS, WATERPROOF PRODUCT SPECIFICATION
MODULAR 154 (58 AND 96) POS, WATERPROOF PRODUCT SPECIFICATION 108-18965 Product Specification 108-18965 10.02. 2011 Rev C1 MODULAR 154 (58 AND 96) POSITION, WATERPROOF CONTENT : 1 PRODUCT OVERVIEW 1.1
More informationEVERCLEAR Mini Multi-Lane High Speed Interconnects & Cable Assemblies
EVERCLEAR Mini Multi-Lane High Speed Interconnects & Cable Assemblies APPLICATIONS High Speed I/O Multiple Channels Interconnects Switches for Fibre Channel and Infiniband Standards Internal and External
More informationYour Pick... One Solution
Abrasion Resistance NBCCS EMC Safety High Speed Complete Harnessing Solutions Repairability Reliability Extreme Temperatures Flexibility Your Pick... One Solution Low Outgassing Flame Retardant Fuel and
More information/Oct/2014 Rev B
Product Specification 108-93042 07/Oct/2014 Rev B Class EA shielded solid Patch cords 1. SCOPE 1.1 Content This specification describes performance and material requirements and tests procedures for TE
More informationIntroducing Low Voltage DC Grid Interconnects
Introducing Low Voltage DC Grid Interconnects LVDC Grid Interconnects KEY FEATURES Power Feed Cable Assembly Power Feed Connectors are available upon special request comprising of the following: - Universal
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2016-01-26 Page 1 of 7 Report Reference # E182560-V4-S52 UL TEST REPORT AND PROCEDURE Standard: ANSI/AAMI ES60601-1 (2005/(R)2012 + A1:2012, C1:2009/(R)2012 + A2:2010/(R)2012) - Amendment 1
More informationMicroTech Series 200 Centrifugal Chiller
Protocol Data Information Packet Version 2.2 Group: Controls Date: March 1999 MicroTech Series 200 Centrifugal Chiller Data Communications Packet for Protocol 2002 McQuay International Revision History
More informationThe best in connector value... today, tomorrow and into the future!
The best in connector value... today, tomorrow and into the future! www.connectpositronic.com Compact PCI Euro Card Power Connectors AC, DC & signal contacts in one connector Safety recessing 12 variations
More informationCertificate of Compliance
Certificate of Compliance Certificate: 2595099 (LR 7189-177) Master Contract: 164196 Project: 2697346 Date Issued: January 28, 2014 Issued to: Tyco Electronics Corporation 2901 Fulling Mill Rd Mail Stop
More informationANNUALLY 30 April 1996 SUPERSEDING QPL October 1995 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-P-50884
QUALIFICATIONS VALIDATED ANNUALLY 30 April 1996 SUPERSEDING QPL-50884-36 15 October 1995 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-P-50884 PRINTED WIRING, FLEXIBLE
More informationHARTMAN Smart AC Contactors
HARTMAN Smart AC Contactors Intelligent Contactors for Critical Aerospace Applications Intelligent Power Protection Products One of the most important trends today for military and aerospace contactors
More informationPRODUCT SPECIFICATION. 0.5mm Fine Stacking. Hermaphroditic Type BTB Connector
PRODUCT SPECIFICATION 108-115057 29OCT13 Rev. A1 0.5mm Fine Stacking Hermaphroditic Type BTB Connector 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for 0.5mm
More informationS200 SHIELD TERMINATORS
RAYCHEM S200 SHIELD TERMINATORS FAST, EASY SHIELD TERMINATION AND GROUNDING TO 200 C RAYCHEM S200 SHIELD TERMINATORS High-Performance, High-Temperature Cable Terminators Heat-Shrinkable Sleeve for Fast,
More informationNEMA Standards Publication WC High-Temperature and Electronic Insulated Wire, Impulse Dielectric Testing
NEMA Standards Publication High-Temperature and Electronic Insulated Wire, Impulse Dielectric Testing Published by: National Electrical Manufacturers Association 1300 North 17th Street, Suite 1752 Rosslyn,
More informationSide Entry Insulation Damage Repair Sleeve (SEIDRS) Raychem Devices Products
1.0 Scope This specification covers the design, performance and qualification requirements for Raychem Side Entry Insulation Damage Repair Sleeve. 1.1 Description. Raychem SEIDRS covered by this specification
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61784-5-10 Edition 2.0 2010-07 colour inside Industrial communication networks Profiles Part 5-10: Installation of fieldbuses Installation profiles for CPF 10 INTERNATIONAL ELECTROTECHNICAL
More informationUniversal Retention Modules 02 MAR 10 Rev A
NOTE i Application Specification 114-26017 Universal Retention Modules 02 MAR 10 Rev A All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
More informationDLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-50884
Specification Details: Specification: MIL-P-50884 Title: Printed Wiring, Flexible and Rigid-Flex Federal Supply Class (FSC): 5998 Conventional: Yes Specification contains quality assurance program: No
More information/Oct/2014 Rev E
Product Specification 108-93017 14/Oct/2014 Rev E Cat 6 Unshielded Patch Cords 1. SCOPE 1.1 Content This specification describes performance and material requirements and tests procedures for TE Connectivity
More informationMILITARY/AEROSPACE MARKETS INNOVATIVE SOLUTIONS GUIDE
MILITARY/AEROSPACE MARKETS INNOVATIVE SOLUTIONS GUIDE Solutions for Military/Aerospace Welcome to Sumitomo Electric Interconnect Products, Inc.. Since our inception in 1985, Sumitomo Electric Interconnect
More informationIntroducing Solar Identification Labels
Introducing Solar Identification Labels Solar Identification Labels KEY FEATURES Recommended for use in identification of DC Disconnects and Inverters. For use on painted smooth metal and textured metal
More informationSolderSleeve Shield Terminators
SolderSleeve Shield Terminators Product Facts Transparent insulation sleeve provides encapsulation, inspectability, strain relief, and insulation Prefluxed solder preform provides a controlled soldering
More informationCURRICULUM VITAE Thomas Waardenburg Phone (888)
CURRICULUM VITAE Thomas Waardenburg Phone (888) 964-4445 I. PERSONAL II. Date & Place of Birth September 2, 1951 Broward County, Fl Marital Status Children Divorced 2 Todd & Ty (both adults) Business Address
More informationCOMMERCIAL ITEM DESCRIPTION TRAPS, STEAM
[INCH-POUND] A-A-60001A 14 December 2013 SUPERSEDING A-A-60001 June 17, 1997 COMMERCIAL ITEM DESCRIPTION TRAPS, STEAM The General Services Administration has authorized the use of this commercial item
More informationTE Connectivity's AMP NETCONNECT Cable Management
One of the major challenges facing cabling mounting holes installers and maintenance personnel is organizing distribution cables and patch cords in the telecommunications room. TE Connectivity's AMP NETCONNECT
More informationSEMIANNUALLY 24 August 2000 SUPERSEDING QPL-390l June 2000 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION
QUALIFICATIONS VALIDATED QPL-390l7-75 SEMIANNUALLY 24 August 2000 SUPERSEDING QPL-390l7-74 29 June 2000 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-390l7 RESISTORS,
More informationQuality. Speed. You need to protect your customers and your brand s reputation by using the highest quality products.
Quality You need to protect your customers and your brand s reputation by using the highest quality products. How do we ensure that our products are the highest quality? Multiple in-process testing Robust,
More informationCat 6 Shielded Patch cords
Product Specification 108-93010 14/Oct/2009 Rev E Cat 6 Shielded Patch cords 1. SCOPE 1.1 Content This specification describes performance and material requirements and tests procedures for AMP NETCONNECT*
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61784-5-14 Edition 1.0 2010-07 colour inside Industrial communication networks Profiles Part 5-14: Installation of fieldbuses Installation profiles for CPF 14 IEC 61784-5-14:2010(E)
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Demonstrate knowledge of inspection and testing of interconnected control and fire alarm systems Level 4 Credits 4 Purpose This unit standard is for personnel employed in the fire protection
More informationApplication Specification MAG-MATE* Poke-In Tab Terminals
Application Specification MAG-MATE* 114-2050 Poke-In Tab Terminals 30 MAR 07 Rev G1 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
More informationDEUTSCH 369 Series PCB-Mount Connectors Compact, Lightweight In-Line and Panel-Mount Connectors for Printed Circuit Board Applications
DEUTSCH 369 Series PCB-Mount Connectors Compact, Lightweight In-Line and Panel-Mount Connectors for Printed Circuit Board Applications DEUTSCH 369 Series PCB-Mount Connectors DEUTSCH 369 Series connectors
More informationPressure Transducers Ultrahigh-Purity
www.swagelok.com Pressure Transducers Ultrahigh-Purity PTU Series Single-end, flow-through, and modular surface-mount models Positive pressure ranges to 5000 psi, 400 bar, and 40 MPa; compound pressure
More informationCAN/ULC-S INTEGRATED SYSTEMS TESTING OF FIRE PROTECTION AND LIFE SAFETY SYSTEMS
2013 Randal Brown & Associates Engineering Ltd. 1 RANDAL BROWN & ASSOCIATES ENGINEERING LTD. CONSULTING ENGINEERS LIFE SAFETY & FIRE PROTECTION 105 6 LANSING SQUARE TORONTO, ONTARIO CAN/ULC-S1001-11 INTEGRATED
More informationStandard and Customized Hand Tool Kits
Standard and Customized Hand Tool Kits Application Tooling and Equipment Portfolio Applicators Board Processing Equipment Crimp Machines and Equipment Equipment for Electrical Testing FFC-FPC Equipment
More informationContacts for Econoseal III Connectors Series.070 (1.8 mm) and Series.250 (6.3 mm)
Series.070 (1.8 mm) and Series.250 (6.3 mm) Introduction Tyco Electronics Econoseal III sealed connector range has been designed to meet the exacting requirements of the automotive industry, for a reliable
More informationBusiness Process and Procedures Workstream. Event Log Collection, Processing & Delivery process (BP05)
Business Process and Procedures Workstream Options Paper Collection, Processing & Delivery process (BP05) Version Number: Status: Author: Version 0.1 Draft P Egger Date Published: 07 February 2011 File
More informationAS/NZS :2011. Household and similar electrical appliances Safety AS/NZS :2011. Part 1: General requirements
AS/NZS 60335.1:2011 (IEC 60335-1, Ed 5.2:2016, MOD) Incorporating Amendment No. 1, 2, 3 and 4 Australian/New Zealand Standard Household and similar electrical appliances Safety Part 1: General requirements
More informationFiber Optic Distribution Cables (6-144 Fibers)
900um Buffered Aramid Yarn Strength Members Outer 6 or 12 Subunit Central Strength Member Outer Ripcord Single Unit Cable 6-24 Multi-Unit Cable 24-144 Description: AMP NETCONNECT distribution cables are
More informationSECTION REGULATORY REQUIREMENTS. A. Relationship between Code, Ordinances, Standards and Contract Documents
SECTION 01410 PART I - GENERAL 1.01 SECTION INCLUDES A. Relationship between Code, Ordinances, Standards and Contract Documents B. Applicable Codes, Laws and Ordinances C. Project Inspections D. Office
More informationFTTX Solutions Mini Rapid Fiber Distribution Terminal (RDT)
TE Connectivity's (TE) FTTX infrastructure solutions are designed from the ground up to meet the unique requirements of FTTX networks. Designed for operational efficiency and scalability, TE s FTTX solutions
More informationChapter. Configuring Cisco VSMS. Versions 5.1, 6.0. Configuring Third-Party Programs. SightLogix, Inc
Versions 5.1, 6.0 2 Chapter Configuring Third-Party Programs SightLogix devices are used with two types of third-party programs: VMS programs, which display video, GPS coordinates, and alarm and other
More informationMIL-STD-1407B 17 December 1985 SUPERSEDING MIL-STD-1407A 16 July 1975 MILITARY STANDARD HEATERS, VEHICULAR COMPARTMENT; HEATERS, COOLANT, ENGINE;
17 December 1985 SUPERSEDING MIL-STD-1407A 16 July 1975 MILITARY STANDARD HEATERS, VEHICULAR COMPARTMENT; HEATERS, COOLANT, ENGINE; HEATERS, SPACE; HEATERS, DUCT-TYPE AMSC N/A FSC 4520 DISTRIBUTION STATEMENT
More informationHARMONISATION STATUS OF SELECTED ELECTRICAL AND NON-ELECTRICAL Ex STANDARDS MARCH 2018
Harmonisation status of selected electrical and non-electrical ex standards BAS-PS-010 - Issue 1 - March 2018 P. 1 HARMONISATION STATUS OF SELECTED ELECTRICAL AND NON-ELECTRICAL Ex STANDARDS MARCH 2018
More informationSOLARLOK Interconnection System Installation Manual
SOLARLOK Interconnection System 1. Safety Note! n The SOLARLOK connector is to be used only to interconnect firmly fixed cables. n Do not disconnect under electrical load! n Electrical current path should
More informationImplementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -
TF N 530 Rev.2 2012-04-13 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - 1 Drafting
More informationPlug shell and receptacle, single cavity, floating, EN Application of modular rectangular modules and shells per EN4165
PRODUCT SPECIFICATION Sep 22, 29 Rev. B CONNECTOR, SINGLE CAVITY, AEROSPACE, PANEL MOUNT, FLOATING, EN416 1 - SCOPE 1.1. Content This document covers the performances, tests, and quality requirements of
More informationPERFORMANCE SPECIFICATION SYSTEMS, ILLUMINATED, WARNING, CAUTION, AND ADVISORY, GENERAL SPECIFICATION FOR
PERFORMANCE SPECIFICATION INCH-POUND 11 May 1998 SUPERSEDING MIL-S-38039B 10 March 1980 SYSTEMS, ILLUMINATED, WARNING, CAUTION, AND ADVISORY, GENERAL SPECIFICATION FOR This specification is approved for
More informationQUADRAX D-SUB CONNECTORS
QUADRAX D-SUB CONNECTORS RUGGED QUADRAX DESIGN ENABLES GIGABIT ETHERNET SPEEDS WITH SUPERIOR SHIELDING PERFORMANCE FOR SIGNAL INTEGRITY QUADRAX D-SUB CONNECTORS Quadrax High-Speed Connectors WELL ESTABLISHED
More informationAmerican National Standard. for Roadway and Area Lighting Equipment Solar Lighting Systems ANSI C Secretariat:
ANSI C136.40-2014 American National Standard for Roadway and Area Lighting Equipment Solar Lighting Systems Secretariat: National Electrical Manufacturers Association Approved July 17, 2014 Published September
More informationSummary of Other State Archeological Guidelines
Summary of Other State Archeological Guidelines This is a summary all guidelines for archeology from 17 other states. This information was gathered in order to see what type of guidelines other states
More information