AS/NZS :2006 Interior and workplace lighting - Part 1: General principles and recommendations

Transcription

1 Menu Home About this portal Latest updates Print Save Resource detail Citations AS/NZS :2006 Interior and workplace lighting - Part 1: General principles and recommendations Table of Contents View on Information Provider website {{ linktext }} Abbreviation AS/NZS :2006 Valid from 20/02/2006 Information provider Standards New Zealand Author Standards New Zealand, Standards Australia Information type New Zealand Standard Format PDF Cited By This resource is cited by 5 documents (show Citations) Cites This resource cites 53 documents (show Citations) Description Provides general principles and recommendations for the lighting of building interiors to enhance the performance and comfort of those performing visual tasks. Deals with illuminating essential task details, using both artificial light and daylight, while controlling or excluding factors that might cause visual discomfort.

2 Scope This Standard sets out general principles and recommendations for the lighting of interiors of buildings for performance and comfort. It applies primarily to interiors in which specific visual tasks are undertaken and takes into account both electric lighting and daylight. The recommendations have the object of producing a visual environment in which essential task details are made easy to see and adverse factors which may cause visual discomfort are either excluded or appropriately controlled. Recommendations for the lighting of particular interiors or activities are provided in the Standards which comprise AS(/NZS) Refer also to AS/NZS for basic requirements for safe movement. The Standard does not deal with lighting for the purposes of decoration, display, entertainment or sport. For assistance with locating previous versions, please contact the information provider. Table of Contents View on Information Provider website {{ linktext }} For assistance with locating previous versions, please contact the information provider. This resource is cited by: AS/NZS :2006 Interior and workplace lighting - Part 1: General principles and recommendations This document is CITED BY: F6/AS1 (Third edition, amendment 4) AS/NZS :2006 is cited by Acceptable Solution F6/AS1 Visibility in Escape Routes from 18/10/2007 F6/AS1 (Third edition, amendment 3) AS/NZS :2006 is cited by Acceptable Solution F6/AS1 Visibility in Escape Routes from 18/10/2007 F6/AS1 (Third edition, amendment 2) AS/NZS :2006 is cited by Acceptable Solution F6/AS1 Visibility in Escape Routes from 18/10/2007 NZS :2007 AS/NZS :2006 is cited by NZS :2007 Energy efficiency - Large buildings - Lighting NZS 4334:2012

3 AS/NZS :2006 is cited by NZS 4334:2012 Platform lifts and low-speed lifts Back AS/NZS :2006 Interior and workplace lighting - Part 1: General principles and recommendations Show what documents this resource is CITED BY Show what documents this resource CITES Description Provides general principles and recommendations for the lighting of building interiors to enhance the performance and comfort of those performing visual tasks. Deals with illuminating essential task details, using both artificial light and daylight, while controlling or excluding factors that might cause visual discomfort. View on Information Provider website AS/NZS :2006 Interior and workplace lighting - Part 1: General principles and recommendations Description Provides general principles and recommendations for the lighting of building interiors to enhance the performance and comfort of those performing visual tasks. Deals with illuminating essential task details, using both artificial light and daylight, while controlling or excluding factors that might cause visual discomfort. View on Information Provider website This resource cites: AS/NZS :2006 Interior and workplace lighting - Part 1: General principles and recommendations This document CITES: New Zealand Standards AS/NZS :2001 AS/NZS :2006 cites AS/NZS :2001 Interior lighting - Part 4: Maintenance of electric lighting systems AS/NZS 2633:1996

4 AS/NZS :2006 cites AS/NZS 2633:1996 Guide to the specification of colours AS/NZS 3000:2000 AS/NZS :2006 cites AS/NZS 3000:2000 Electrical installations (known as the Australian/New Zealand Wiring Rules) AS/NZS 3100:2002 AS/NZS :2006 cites AS/NZS 3100:2002 Approval and test specification - General requirements for electrical equipment AS/NZS :1998 AS/NZS :2006 cites AS/NZS :1998 Lighting system performance - Accuracies and tolerances - Part 1: Overview and general recommendations AS/NZS :1998 AS/NZS :2006 cites AS/NZS :1998 Lighting system performance - Accuracies and tolerances - Part 2: Compliance requirements AS/NZS :1999 AS/NZS :2006 cites AS/NZS :1999 Electromagnetic compatibility - Generic emission standard - Part 1: Residential, commercial and light industry AS/NZS :1999 AS/NZS :2006 cites AS/NZS :1999 Electromagnetic compatibility - Generic emission standard - Part 2: Industrial environments AS/NZS :2004 AS/NZS :2006 cites AS/NZS :2004 Double-capped fluorescent lamps - Performance specifications - Part 1: General AS/NZS :2005 AS/NZS :2006 cites AS/NZS :2005 Explosive atmospheres - Part 0: General requirements AS/NZS :2004 AS/NZS :2006 cites AS/NZS :2004 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas AS/NZS :2000 AS/NZS :2006 cites AS/NZS :2000 Explosive atmospheres - Part 11: Intrinsic safety 'i' AS/NZS :2000

5 AS/NZS :2006 cites AS/NZS :2000 Explosive atmospheres - Part 12: Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents AS/NZS :2006 AS/NZS :2006 cites AS/NZS :2006 Explosive atmospheres - Part 15: Construction, test and marking of type of protection, 'n' electrical apparatus AS/NZS :2005 AS/NZS :2006 cites AS/NZS :2005 Explosive atmospheres - Part 18: Construction, test and marking of type of protection encapsulation 'm' electrical apparatus AS/NZS :2005 AS/NZS :2006 cites AS/NZS :2005 Explosive atmospheres - Part 1: Flameproof enclosures 'd' AS/NZS :2000 AS/NZS :2006 cites AS/NZS :2000 Explosive atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus AS/NZS :2004 AS/NZS :2006 cites AS/NZS :2004 Explosive atmospheres - Part 25: Intrinsically safe systems AS/NZS (Int):2005 AS/NZS :2006 cites AS/NZS (Int):2005 Explosive atmospheres - Part 26: Construction, test and marking of Group II Zone 0 electrical apparatus AS/NZS (Int):2003 Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) AS/NZS :2006 cites AS/NZS (Int):2003 Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) AS/NZS :2002 AS/NZS :2006 cites AS/NZS :2002 Explosive atmospheres - Part 2: Pressurized enclosures 'p' AS/NZS :2000 AS/NZS :2006 cites AS/NZS :2000 Explosive atmospheres - Part 4: Method of test for ignition temperature AS/NZS :2000 AS/NZS :2006 cites AS/NZS :2000 Explosive atmospheres - Part 4: Powder

6 filling "q" AS/NZS :2000 AS/NZS :2006 cites AS/NZS :2000 Explosive atmospheres - Part 6: Oilimmersion 'o' AS/NZS :2002 AS/NZS :2006 cites AS/NZS :2002 Explosive atmospheres - Part 7: Increased safety 'e' AS/NZS :2003 AS/NZS :2006 cites AS/NZS :2003 Luminaires - Part 1: General requirements and tests AS/NZS :2002 AS/NZS :2006 cites AS/NZS :2002 Luminaires - Part 2.8: Particular requirements - Handlamps AS/NZS 60922:1998 AS/NZS :2006 cites AS/NZS 60922:1998 Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - General and safety requirements AS/NZS 60923:1998 AS/NZS :2006 cites AS/NZS 60923:1998 Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements AS/NZS 61048:2002 AS/NZS :2006 cites AS/NZS 61048:2002 Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements AS/NZS 61050:1998 AS/NZS :2006 cites AS/NZS 61050:1998 Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) - General and safety requirements AS/NZS :2003 AS/NZS :2006 cites AS/NZS :2003 Lamp controlgear - Part 2.8: Particular requirements for ballasts for fluorescent lamps AS/NZS CISPR 14.1:2003 AS/NZS :2006 cites AS/NZS CISPR 14.1:2003 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

7 AS/NZS CISPR 15:2002 AS/NZS :2006 cites AS/NZS CISPR 15:2002 Limits and methods of radio disturbance characteristics of electrical lighting and similar equipment NZS 4243:1996 AS/NZS :2006 cites NZS 4243:1996 Energy efficiency - Large buildings NZS 6703:1984 AS/NZS :2006 cites NZS 6703:1984 Code of practice for interior lighting design Australian Standards AS AS/NZS :2006 cites AS SAA Industrial Safety Colour Code AS AS/NZS :2006 cites AS Identification of the contents of pipes, conduits and ducts AS AS/NZS :2006 cites AS Interior lighting - Part 2.2: Office and screenbased tasks AS AS/NZS :2006 cites AS Interior lighting - Part 3: Measurement, calculation and presentation of photometric data AS AS/NZS :2006 cites AS Emergency escape lighting and exit signs for buildings. Part 1: System design, installation and operation AS (R2013) AS/NZS :2006 cites AS (R2013) Tungsten filament lamps for general service - Performance requirements AS AS/NZS :2006 cites AS Fluorescent lamp ballasts of reactive type - Performance requirements AS (R2013) AS/NZS :2006 cites AS (R2013) Suspended ceilings recessed luminaires and air diffusers - Interface requirements for physical compatibility

8 AS AS/NZS :2006 cites AS Approval and test specification - Bayonet lampholders AS AS/NZS :2006 cites AS Approval and test specification - Edison-type screw lampholders AS AS/NZS :2006 cites AS Electric cables - Glass fibre insulated - For working voltages up to and including 0.6/1 (1.2) kv AS AS/NZS :2006 cites AS Simplified definitions of lighting terms and quantities AS (R2016) AS/NZS :2006 cites AS (R2016) Lighting booths for visual assessment of colour and colour matching AS AS/NZS :2006 cites AS Degrees of protection provided by enclosures (IP Code) Other CIE AS/NZS :2006 cites CIE Method of measuring and specifying colour rendering properties of light sources CIE AS/NZS :2006 cites CIE An analytic model for describing the influence of lighting parameters upon visual performance, 2nd ed., Vol.1.: Technical foundations CIE AS/NZS :2006 cites CIE Discomfort glare in interior lighting Back Close Table of Contents

9 Section 1 Scope And General 1.1 Scope 1.2 Objective 1.3 Referenced Documents 1.4 Definitions Section 2 General Requirements Of Good Interior Lighting 2.1 The Importance Of Quality Lighting 2.2 Objectives Of An Interior Lighting System 2.3 Other Considerations 2.4 Daylight And Electric Light Section 3 Task Visibility 3.1 Scope 3.2 Visibility And Visual Performance 3.3 Luminances In The Visual Field 3.4 The Effects Of Illuminance 3.5 The Use Of Magnification 3.6 Recommended Illuminances 3.7 Maintenance Of Illuminance 3.8 Uniformity Of Illuminance 3.9 Further Considerations For Task Characteristics

10 3.10 Examples Of Visual Performance 3.11 Departures From The Recommended Maintained Illuminances Section 4 Directional Effects Of Lighting 4.1 General Considerations 4.2 Modelling And Shadows 4.3 Revealing Task Characteristics 4.4 Revealing The Environment Section 5 Unwanted Reflections 5.1 General Considerations 5.2 Relative Location Of Tasks, Light Sources And Screening 5.3 Use Of Local Lighting (Increasing Task Illuminance) 5.4 Limitation Of Source Luminance 5.5 Avoidance Of Glossy Surfaces In Visual Task Surrounds 5.6 Reflections In Screen-Based Equipment 5.7 Contrast Rendering Factor Section 6 Surfaces 6.1 General Considerations 6.2 Surface Reflectances For Efficient Light Distribution 6.3 Surface Reflectances For Good Seeing Conditions

11 6.4 Nature Of Surface Finishes 6.5 Colour Of Surfaces 6.6 Colour For Identification And Safety 6.7 Avoiding Distracting Patterns Section 7 Light Source Colour 7.1 General Considerations 7.2 Colour Appearance Of Sources 7.3 Colour Rendering Of Sources 7.4 Nature Of The Task 7.5 Nature Of The Interior 7.6 Compatibility With Daylight 7.7 Compatibility With Other Lamps 7.8 Maintenance Section 8 Glare And Related Effects 8.1 General Consideration 8.2 Disability Glare 8.3 Discomfort Glare 8.4 Gloom In Interiors 8.5 Transient Adaptation Effects Section 9 Light Sources, Luminaires And Control Systems

12 9.1 Scope 9.2 Daylight 9.3 Windows And Rooflights 9.4 Electric Lamps 9.5 Luminaires 9.6 Control Systems (For Electric Lighting) Section 10 Lighting Systems 10.1 Introduction 10.2 Daylighting Systems 10.3 Electric Lighting Systems 10.4 Methods Which Can Be Applied In Lighting Systems 10.5 Location Of Luminaires 10.6 Daylight-Electric Light Integration 10.7 Energy-Effective Lighting Section 11 Lighting Design Procedure 11.1 Introduction 11.2 Objectives 11.3 Specification 11.4 Preliminary Design 11.5 Detailed Design

13 11.6 Appraisal Section 12 Maintenance Of Lighting Systems And Equipment 12.1 Need For Maintenance 12.2 Maintenance Of Electric Lighting Systems 12.3 Depreciation And Maintenance Of Windows And Rooflights 12.4 Maintenance Of Room Surfaces Appendices Appendix A - List Of Referenced Documents Appendix B - Calculation And Measurement Of Illuminance Appendix C - Notes On Changes To Illuminance Recommendations Appendix D - Notes On The Use Of Utilization Factor Tables By The Lighting Designer Appendix E - Further Details Regarding Surface Colour Appendix F - Bibliographical References Print Save Feedback Contact us Privacy policy Disclaimer Copyright

14 Feedback