Line Array Systems. 15mm multilayer birch plywood, hi-resistance scratch-proof finishing, black painting

Transcription

1 Line Array Systems M A D E I N I TA LY H xv HDA500 Hi-performance compact module for line-array systems, bi-amplifiable, 3-way 500W AES, 134dB SPL 8 Nd woofer, long-excursion, 2 voice 8 Nd mid-woofer, 2 voice 2 Nd HF compression drivers with 1 throat, titanium diaphragm, 3 voice 100 x7.5 (HxV) constant-directivity waveguide Impedance: LF-MF, HF 16Ohm lifier: LF-MF up to 1000W RMS/, HF up to 200W RMS/16Ohm Sensitivity (@1W/1m): LF 98dB, HF 108dB : Hz : 300/1800Hz External HPF recommended range: 80Hz to 100Hz Passive filter with HF driver protection EQ switch to select optimal setup of each module for short, medium and long-throw applications Cabinet construction: Trapezoidal profile with 7,5 enclosure angle 8 Nd 1 Nd RIGGING 100 x7,5 DEDICATED PRESET LIGHTWEIGHT 15mm multilayer birch plywood, hi-resistance scratch-proof finishing, black painting 8 Nd woofers installed in separate chambers Nd HF drivers loaded by waveguides designed for curvilinear line-array systems hardware for suspension, 1 steps for angle adjustment, safety-pins in steel 7:1 safety factor for mechanics : Neutrik NL-4 Speakon in/out Applications: High directivity & efficiency PA system for indoor/outdoor events in large venues Sound reinforcement in live applications, theaters and permanent installations Combined with DAD MA18SP subwoofers to extend performance in the low range Software: Software for correct setup and aiming of HDA modules Optional Accessories HDA501FB: Flying bar for DAD HDA500 Line-Array system HDA503FB: Compact flying bar for HDA500 Line-Array system HDB115: Suspension/expansion bar, compatible with HDA800/HDA500 systems HDS160: Kit for ground-stack installation, compatible with HDA803FB/HDA503FB bars 6 HDA502CASE: Flight-case for HDA500, with 2 breaking and 2 swivel wheels, for 2 modules HDA504CASE: Flight-case for HDA500, with 2 breaking and 2 swivel wheels, for 4 modules HDGRLOMD: Shackle omega galvanized nut and cotter pin.

2 Line Array Systems M A D E I N I TA LY top 215 mm 262 mm 400 mm 400 mm side 645 mm AES Power Program Power (RMS) Horizontal Vertical range Low Section Mid Section LF - MF Loading LF-MF Impedance LF -MF Bandpass Sensitivity High Section HF Loading HF Impedance HF Bandpass Sensitivity Suspension System Grille Connectors Measures (WxHxD) HDA500 Ultra-compact module, bi-amp., 3-way LF - MF 400W,HF 100W LF - MF 800W, HF 200W LF - MF up to 800W, HF up to 200W 16Ohm 100 ( Hz) Variable (depending on system configuration) Hz (±3 db) Hz (-10 db) 128/134dB Transducers Section 8 long-excursion Nd woofer / 2 8 Nd mid-woofer / 2 bass reflex 2x1 Nd drivers / 1.7 Horn 16Ohm Cabinet 7,5 Proprietary built-in steel suspension system Black steel grille, foam backed Neutrik NL4 Speakon in/out 645x400x262 mm 24 Kg 7

3 Line Array Systems M A D E I N I TA LY HDA800 Hi-performance compact module for line-array systems, all loaded configuration, bi/tri-amplifiable, 3-way 800W AES, 134dB SPL 12 Nd woofer, long excursion, 3 voice 8 Nd mid-woofer, 2 voice 2 Nd HF compression drivers with 1 throat, titanium diaphragm, 1.7 voice 80 x75 (HxV) constant-directivity waveguide Impedance: LF, MF 16Ohm, HF 16Ohm lifiers: LF up to 1000W RMS/, MF up to 400W RMS/16Ohm, HF uo tp 200W RMS/16Ohm Sensitivity (@1W/1m): LF 98dB, MF 101dB, HF 108dB : Hz : 300/1800Hz External HPF recommended range: 80Hz to 100Hz Passive filter with HF driver protection EQ switch to select optimal setup of each module for short, medium and long-throw applications Cabinet construction: Trapezoidal profile with 7,5 enclosure angle 18mm multilayer birch plywood, hi-resistance scratch-proof finishing, black painting H xv 12 Nd 8 Nd 1 Nd RIGGING 80 x7,5 DEDICATED PRESET LIGHTWEIGHT 12 Nd woofer in band-pass configuration, reducing module height to 10,3 (262mm) only 8 Nd mid-woofer loaded by a double-slot waveguide with longitudinal phase plug Nd HF drivers loaded by waveguides designed for curvilinear line-array systems hardware for suspension, 1 steps for angle adjustment, safetypins in steel 7:1 safety factor for mechanics : Neutrik NL-8 Speakon in/out Applications: High directivity & efficiency PA system for indoor/outdoor events in large venues Sound reinforcement in live applications, theaters and permanent installations High quality vocal/music performance for live or recorded music Combined with DAD HD21SW subwoofers to extend performance in the low range Software: Software for correct setup and aiming of HDA modules Optional Accessories HDA803FB: Compact flying bar for HDA800 Line-Array system HDS160: Kit for ground-stack installation, compatible with HDA803FB/HDA503FB bars HDB115: Suspension/expansion bar, compatible with HDA800/HDA500 systems HDA802CASE: Flight-case for HDA800, with 2 breaking and 2 swivel wheels, for 2 modules 8 HDA804CASE : Flight-case for HDA800, with 2 breaking and 2 swivel wheels, for 4 modules HDGRLOMD: Shackle omega galvanized nut and cotter pin.

4 Line Array Systems M A D E I N I TA LY top 215 mm 262 mm mm side 832 mm AES Power Program Power (RMS) Horizontal Vertical range Low Section LF Loading LF Impedance LF Bandpass Sensitivity Mid Section MF Loading MF Impedance MF Bandpass Sensitivity High Section HF Loading HF Impedance HF Bandpass Sensitivity Suspension System Grille Connectors Measures (WxHxD) HDA800 All-loaded module, bi/tri-amp., 3-way LF 500W, MF 200W, HF 100W LF 1000W, MF 400W, HF 200W LF up to 1000W, MF up to 400W 16Ohm, HF up to 200W 16Ohm 80 ( Hz) Variable (depending on system configuration) Hz (±3 db) Hz (-10 db) 128/134dB Transducers Section 12 long-excursion Nd woofer / 3 7th-order bandpass 98 8 Nd mid-woofer / 2 Horn 16Ohm 2x1 Nd drivers / 1.7 Horn 16Ohm Cabinet 7,5 Proprietary built-in steel suspension system Black steel grille, foam backed Neutrik NL8 Speakon in/out 832x400x262 mm 37 Kg 9

5 Line Array Systems M A D E I N I TA LY MA LINE ARRAY SERIES Modular constant-curvature line-array system, available in active and passive versions 2 x 10 Nd woofer with 2.6 voice HF Nd compression driver with 1.4 throat, titanium diaphragm, 3 voice Cabinet construction: 18mm multilayer birch plywood hardware for suspension of arrays made of long and medium throw Suspension system over 6 anchoring points (M8 type) for permanent installations Double-angle mount-pole adaptor for 35mm stands Applications: Hi-definition system for reproduction of voice and music in live and recorded performance For sound installations in environments requiring dynamics and high sound pressure Full-range speaker or mid-high unit in combination with DAD MA18SA subwoofer Optional Accessories MA4SK: Plywood skate for 2 pcs MA615/MA605, breaking swivel wheels MA6BAR: Compact flying-bar for MA605/MA615 Line-Array system MA6FC Flight-case with 4 wheels for MA6 line-array modules: - MA6FC052: 2x MA605 modules + flying bar MA6BAR - MA6FC053: 3x MA605 modules + flying bar MA6BAR - MA6FC152: 2x MA615 modules - MA6FC153: 2x MA615 module, 1x MA605 modules Nd 1,4 Nd DIGITAL AMP DSP RIGGING LIGHTWEIGHT MA615A Wide-dispersion active module for line-array, 1500W D-class amplifier, 2-way, 137dB SP 100 x30 (HxV ) constant-directivity waveguide, designed for curvilinear line-array systems Trapezoidal profile with 15 angle 1500W D-class amplifying module Digital Signal Processor with 4 presets for selection of optimal according to array setup User control panel: selection of DSP presets, volume, LED level indicator, clip and protection indicators 10 Nd 1,4 Nd MA615P DEDICATED PRESET RIGGING LIGHTWEIGHT Wide-dispersion passive module for line-array, 2-way 500W AES, 137dB SPL 100 x30 (HxV ) constant-directivity waveguide, designed for curvilinear line-array systems Trapezoidal profile with 15 angle Impedance: lifier: up to 1000W RMS/ : 1100Hz External HPF recommended range: 100Hz to 150Hz Passive filter with HF driver protection 10 Nd 1,4 Nd DIGITAL AMP DSP RIGGING LIGHTWEIGHT MA605A High-directivity active module for line-array, 1500W D-class amplifier, 2-way, 138dB SPL 80 x10 (HxV ) constant-directivity waveguide, designed for curvilinear line-array systems Trapezoidal profile with 5 angle 1500W D-class amplifying module Digital Signal Processor with 4 presets for selection of optimal according to array setup User control panel: selection of DSP presets, volume, LED level indicator, clip and protection indicators 10 Nd 1,4 Nd MA605P DEDICATED PRESET RIGGING LIGHTWEIGHT High-directivity passive module for line-array, 2-way 500W AES, 138dB SPL 80 x10 (HxV ) constant-directivity waveguide, designed for curvilinear line-array systems Trapezoidal profile with 5 angle Impedance: lifier: up to 1000W RMS/ : 1100Hz External HPF recommended range: 100Hz to 150Hz Passive filter with HF driver protection

6 Line Array Systems M A D E I N I TA LY 656 mm 656 mm bottom 497 mm MA615A MA615P Trapezoidal profile with 15 angle H xv 100 x30 MA605A MA605P Trapezoidal profile with 5 angle H xv 80 x10 MA605A MA605P MA615P MA615A Active module System 2 way type Active module 2 way System type Passive module 2 way System type Passive module 2 way amp (W/EIAJ) 1500W amp (W/EIAJ) 1500W amp (W/EIAJ) amp (W/EIAJ) AES / Program 500W / 1000W 500W / 1000WPower amp up to 1000W RMS/ up torecommended 1000W RMS/ impedance impedance impedance Horizontal Horizontal 80 ( Hz) Horizontal 100 ( Hz) 100 ( Hz) Horizontal 80 ( Hz) Variable (depending on Variable (depending on Variable (depending on Variable (depending on Variable (depending Verticalconfiguration) angle on system Vertical Vertical Vertical system configuration) system configuration) system configuration) system configuration) Hz Hz Hz Hz 2x10 Nd woofer / 2x10 Nd woofer / 2x10 Nd woofer / 2x10 Nd woofer / Low Low Low Low High 1.4 Nd driver / Nd driver / NdHigh driver / 3 High 1.4 NdHigh driver / 3 (Free sensitivity sensitivity Field) (Free Field) sensitivity 4dBu (1,228Vrms) 4dBu (1,228Vrms) 131/137dB (Free Field) 132/138dB (Free Field) 131/137dB (Free Field) 132/138dB (Free Field) 1100Hz 1100Hz 1100Hz 1100Hz 1-3/4-6 unit Full Range/ 1-3/4-6 unit Full Range/ User controls High Pass Filter High Pass Filter RMS limiter, fast RMS limiter, fast limiter, temp limiter, temp Trapezoidal taper 15 Trapezoidal taper 5 Trapezoidal taper 15 5 Proprietary built-in steel Proprietary built-in steel Proprietary built-in steel Proprietary system Suspension System Suspension System Proprietary built-insystem steel Suspension Suspensionbuilt-in Systemsteel suspension suspension system suspension system suspension system Neutrik XLR in/out; Neutrik XLR in/out; connections Neutrik NL4 Speakon in/out Neutrik XLR in/out; Powercon Neutrikin/out NL4 Speakon in/out in/out connections Neutrik NL4 Speakon connections connections Powercon in/out Powercon in/out 28kg 28kg 30kg 30kg Dimensions (WxHxD) 656x364x425mm Dimensions (WxHxD) 656x332x425mm Dimensions (WxHxD) 656x364x425mm 656x332x425mm side MA605A/P 364 mm mm 332 mm 496 mm mm side MA615A/P 11

7 Line Array Systems M A D E I N I TA LY 636 mm 674 mm 615 mm MA18SP MA18SA Bass-reflex active subwoofer, 3000W D-class amplifier, 134dB SPL Long-excursion 18 Nd woofer with 4,5 voice Electronics: 3000W D-class amplifying system Digital Signal Processor with 4 presets (120/90Hz normal/reverse Phase) for selection of optimal User control panel: selection of DSP presets, volume, LED level indicator, clip and protection indicators Cabinet construction: Cabinet made of 18mm multilayer birch plywood, reinforced with steel strengthenings 18 Nd woofer in bass-reflex with aerodynamic profile. Configuration for extension of to lowest octaves and max control over diaphragm. 12 mechanics for stacking of DAD HDA500 & MA line-array systems Ready to fit optional hardware for transportation 35mm pole-mount adapter for stands : XLR Neutrik in/out; Powercon in/ out Applications: Subwoofer delivering extended High pressure on low frequencies in large indoor/outdoor venues Sound reinforcement in live applications, theaters of permanent installations Subwoofer section of multi-amplified sound systems, combined with DAD HDA500 & MA line-array modules DSP presets for selection of optimal according to application Aerodynamic bass-reflex passive subwoofer, 1700W AES, 134dB SPL Long-excursion 18 Nd woofer with 4,5 voice Impedance: lifier: up to 3400W RMS/ Sensitivity: : Hz External LPF recommended range: 80Hz to 150Hz : Neutrik NL-4 Speakon in/out amp (W/EIAJ) Low Suggested x-over MA18SA Active basssystem reflex type 3000W amp (W/EIAJ) omnidirectional Hz 18 Nd woofer Low/ 4,5 4dBu (1,228Vrms) 128/134dB (Free Field) LPF Suggested processed x-over 120/90Hz normal/reverse Phase RMS limiter, fast limiter, temp Neutrik XLR in/out; Powercon in/out 53kg 615x674x636 Dimensionsmm (WxHxD) top MA18SP Passive - Bass reflex 1700W / 3400W up to 3400W RMS/ omnidirectional Hz 18 Nd woofer / 4.5 (Free Field) 128/134dB (Free Field) Hz Neutrik NL4 Speakon in/out 51kg 615x674x636mm

8 Line Array Systems M A D E I N I TA LY 600 mm 720 mm 800 mm HD21SW Bass-reflex passive subwoofer, 2000W AES, 134dB SPL Long-excursion 21 woofer with 6 voice Impedance: lifier: up to 4000W RMS/ Sensitivity: : Hz External LPF recommended range: 80Hz to 150Hz : Neutrik NL-4 Speakon in/out Cabinet construction: Cabinet made of 18mm multilayer birch plywood, reinforced with steel strengthenings 21 Nd woofer in bass-reflex loading, B4 highly-flat configuration for extension of to lowest octaves and max control over diaphragm top HD21SW mechanics for stacking of DAD HDA800 linearray systems Ready to fit optional hardware for transportation Applications: Subwoofer delivering extended, also in infra-bass applications High pressure on low frequencies in large indoor/ outdoor venues Sound reinforcement in live applications, theaters of permanent installations Subwoofer section of multi-amplified sound systems, combined with DAD HDA800 line-array modules amp (W/EIAJ) Low Suggested x-over Passive - Bass reflex 2000W / 4000W up to 4000W RMS/ omnidirectional Hz 21 Nd woofer / 6 97 (Free Field) 128/134dB (Free Field) Hz Neutrik NL4 Speakon in/out 64kg 800x600x720mm Optional Accessories BAGHD21SW: Fabric protection for HD21SW HD21SWCOVER: Plywood cover for HD21SW HD21SWSK: Plywood skate for HD21SW, 2 breaking swivel wheels 13

9 Line Array Systems M A D E I N I TA LY HDA500 Ultra-compact module, bi-amp., 3-way AES Power LF - MF 400W,HF 100W Program Power LF - MF 800W, HF 200W LF - MF up to 800W, HF up to 200W 16Ohm (RMS) Horizontal 100 ( Hz) Vertical Variable (depending on system configuration) Hz (±3 db) range Hz (-10 db) 128/134dB Transducers Section Low Section 8 long-excursion Nd woofer / 2 Mid Section 8 Nd mid-woofer / 2 LF - MF Loading bass reflex LF-MF Impedance LF -MF Bandpass Sensitivity High Section 2x1 Nd drivers / 1.7 HF Loading Horn HF Impedance 16Ohm HF Bandpass Sensitivity Cabinet 7,5 Suspension System Proprietary built-in steel suspension system Grille Black steel grille, foam backed Connectors Neutrik NL4 Speakon in/out Measures (WxHxD) 645x400x262 mm 24 Kg AES Power Program Power (RMS) Horizontal Vertical range Low Section LF Loading LF Impedance LF Bandpass Sensitivity Mid Section MF Loading MF Impedance MF Bandpass Sensitivity High Section HF Loading HF Impedance HF Bandpass Sensitivity Suspension System Grille Connectors Measures (WxHxD) HDA800 All-loaded module, bi/tri-amp., 3-way LF 500W, MF 200W, HF 100W LF 1000W, MF 400W, HF 200W LF up to 1000W, MF up to 400W 16Ohm, HF up to 200W 16Ohm 80 ( Hz) Variable (depending on system configuration) Hz (±3 db) Hz (-10 db) 128/134dB Transducers Section 12 long-excursion Nd woofer / 3 7th-order bandpass 98 8 Nd mid-woofer / 2 Horn 16Ohm 2x1 Nd drivers / 1.7 Horn 16Ohm Cabinet 7,5 Proprietary built-in steel suspension system Black steel grille, foam backed Neutrik NL8 Speakon in/out 832x400x262 mm 37 Kg Optional Accessories HDA501FB Flying bar for DAD HDA500 Line-Array system HDA801FB Flying bar for DAD HDA800 Line-Array system HDA503FB Compact flying bar for HDA500 LineArray system HDA803FB Compact flying bar for HDA800 Line-Array system HDA502CASE Flight-case for HDA500, with 2 breaking and 2 swivel wheels, for 2 modules HDA504CASE Flight-case for HDA500, with 2 breaking and 2 swivel wheels, for 4 modules HDA802CASE Flight-case for HDA800, with 2 breaking and 2 swivel wheels, for 2 modules HDA804CASE Flight-case for HDA800, with 2 breaking and 2 swivel wheels, for 4 modules HDS160 Kit for ground-stack installation, compatible with HDA803FB/HDA503FB bars 14 HDB115 Suspension/expansion bar, compatible with HDA800/HDA500 systems HDGRLOMD Shackle omega galvanized nut and cotter pin.

10 Line Array Systems M A D E I N I TA LY MA615P MA605A MA615A MA605P Passive module 2 way Active module 2 System way type Active module 2 System way type Passive module 2 way amp (W/EIAJ) amp (W/EIAJ) 1500W amp (W/EIAJ) 1500W amp (W/EIAJ) 500W / 1000W 500W / 1000W up to 1000W RMS/ up to 1000W RMS/ Horizontal 100 ( Hz) Horizontal 80 Horizontal ( Hz) 100 ( Hz) Horizontal 80 ( Hz) Variable (depending configuration) Verticalon Variable (depending on system Vertical Variable (depending Vertical on system angle Variable (depending on system Vertical angle on system Variable (depending system angle Hz Hz Hz Hz Low 2x10 Nd woofer / 2.6 Low 2x10 Nd woofer /Low 2.6 2x10 Nd woofer /Low 2.6 2x10 Nd woofer / Nd driver / 3 High 1.4 Nd driver /High Nd driver /High Nd driver / 3 High sensitivity (Free Field) 4dBu (1,228Vrms) 4dBu (1,228Vrms) (Free Field) MaxField) 131/137dB (Free Field) 132/138dBMax (Free Field) 131/137dBMax (Free Field) 132/138dB (Free 1100Hz 1100Hz 1100Hz 1100Hz 1-3/4-6 unit Full Range/High UserPass controls Filter 1-3/4-6 unit Full Range/High Pass Filter User controls RMS limiter, fast limiter, temp RMS limiter, fast limiter, temp Proprietary built-in steel suspension Suspension System Proprietary built-insuspension steel suspension System Proprietary built-insuspension steel suspension System built-insystem steelsuspension suspension System system Proprietary built-inproprietary steel suspension in/out connections Neutrik NL4 Speakon in/out connections Neutrik XLR in/out; Powercon connections in/out Neutrik XLR in/out; Powercon in/out connections Neutrik NL4 Speakon Neutrik XLR in/out; Powercon in/out Neutrik NL4 Speakon in/out 28kg 28kg 30kg 30kg 656x364x425mm 656x332x425mm 656x332x425mm 656x364x425mm Optional Accessories MA6FC Flight-case with 4 wheels for MA6 line-array modules: - MA6FC052: 2x MA605 modules + flying bar MA6BAR - MA6FC053: 3x MA605 modules + flying bar MA6BAR - MA6FC152: 2x MA615 modules - MA6FC153: 2x MA615 module, 1x MA605 modules MA18SA Active bass reflex amp (W/EIAJ) 3000W omnidirectional Hz Low 18 Nd woofer / 4,5 4dBu (1,228Vrms) 128/134dB (Free Field) Suggested x-over LPF processed 120/90Hz normal/reverse p. RMS limiter, fast limiter, temp Neutrik XLR in/out; Powercon in/out 53kg 615x674x636 mm MA18SP HD21SW Passive - Bass reflex Passive - Bass reflex 1700W / 3400W up to 3400W RMS/ omnidirectional Hz 18 Nd woofer / 4.5 (Free Field) 128/134dB (Free Field) Hz 2000W / 4000W up to 4000W RMS/ omnidirectional Hz 21 Nd woofer / 6 97 (Free Field) 128/134dB (Free Field) Hz Neutrik NL4 Speakon in/out Neutrik NL4 Speakon in/out 51kg 64kg 615x674x636mm 800x600x720mm MA6BAR Compact flying-bar for MA605/ MA615 Line-Array system MA4SK Plywood skate for 2 pcs MA615/ MA605, breaking swivel wheels BAGHD21SW Fabric protection for HD21SW HD21SWCOVER Plywood cover for DAD s HD21SW. HD21SWSK Plywood skate for DAD s HD21SW. MA18SSK Plywood skate for DAD s MA18SA/MA18SP. ACRT4234EU 100mm prof. swivel caster with brake,350kg load limit for a set of 4 wheels ACRT4230EU 100mm professional swivel caster, 350Kg load limit for a set of 4 wheels 15

11 TOURING SYSTEM series M A D E I N I TA LY TOURING System DAD Touring System is a hi-efficiency point-source system designed to deliver max sound pressure and definition in professional audio application over medium and long distances. According to this logic development of Touring System moved towards employment of mechanical and building solutions allowing to maximize extension and electroacoustic efficiency. Touring218H subwoofer employs horn-bandpass loading technique for woofers, combining advantages of horns (efficiency and directivity control) to those of band-pass systems (extension of to the low spectrum of frequencies). Very long excursion of Neodymium woofers and cooling system of mobile, supported by overall efficiency, help to minimize power compression under same conditions of input signal in demanding working environments. Touring112H is a wave-guide speaker with coaxial emission having highly controlled directivity. Coincidence of mid and hi sources avoids phase cancellation at cross point, allowing the system to keep phase coherence and intelligibility over long distances. Peculiarities of Touring System grant a correct tonal balance also in basic configurations composed of a mid-high and a subwoofer, either in groundstacking or suspended setups. hanging hardware is designed to assemble Touring112H in modular vertical/horizontal clusters to meet any requirement in terms of sound coverage.

12

13 TOURING SYSTEM M A D E I N I TA LY 590 mm 600 mm 560 mm TOURING112H High-efficiency passive loudspeaker, horn-loaded configuration, biamplifiable, 2-way 500W AES, 138dB SPL 12 Nd mid-woofer with 3 voice HF Nd compression driver with 1.4 throat, titanium diaphragm, 3 voice 75 x40 (HxV) constant-directivity waveguide Impedance: lifiers: LF up to 800W RMS/, HF up to 220W RMS/ Sensitivity: : Hz External crossover : LF 100/150Hz, HF 1400Hz HF driver protection 18 TOURING112HP : Neutrik NL-4 Speakon in/out Cabinet construction: Trapezoidal profile with 26 angle 18mm multilayer birch plywood Fast-locking fly-track suspension system over 8 anchoring points Mount-pole adaptor for 35mm stands Applications: Excellent clarity in reproduction of voice and music for live and recorded performances For sound installations in indoor/ outdoor environments requiring dynamics and high sound pressure over long distances Mid-high section of multiamplified systems combined with DAD Touring218H subwoofers High-efficiency passive loudspeaker, horn-loaded configuration, 2-way 500W AES, 138dB SPL 12 Nd mid-woofer with 3 voice HF Nd compression driver with 1.4 throat, titanium diaphragm, 3 voice 75 x40 (HxV) constant-directivity waveguide Impedance: lifiers: up to 1000W RMS/ Sensitivity: : Hz : 1400Hz External HPF recommended range: 100Hz to 150Hz HF driver protection : Neutrik NL-4 Speakon in/out Low High connections Dimensions(WxHxD) top TOURING112H TOURING112HP Passive bi-amp System 2 waytype Passive 2 way MF 400W/800W 510W/1020W HF110W/220W MF up to 800W RMS - HF up up to 1000W RMS to 220W RMS impedance MF - HF 75 x40 (HxV) 75 x Hz Hz Low / 12 Nd woofer / 3 12 Nd woofer 3 High/ 1.4 Nd driver / Nd driver 3 (Free sensitivity (Free Field) Field) 132/138dB (Free Field) 132/138dB (Free Field) Active: MF 100/150 Hz Passive: Active: LF 100/150Hz, HF HF 1400 Hz 1400Hz Trapezoidal taper connections Neutrik NL4 Speakon in/out Neutrik NL4 Speakon in/out 38kg 38kg Dimensions(WxHxD) 560x590x600mm 560x590x600mm Optional Accessories TOURING12SK: Plywood skate for TOURING12H/TOURING12HP TOURING12FB: Flying bar for TOURING12H/TOURING12HP point-source systems FLYTRACK1-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-500: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 50cm L RHBR2080: Tensioning belt ratchet, 35mm, L.8m, 2000kg capacity HDGRLOMD: Shackle omega galvanized nut and cotter pin.

14 TOURING SYSTEM M A D E I N I TA LY 570 mm 1165 mm TOURING218H High-efficiency passive subwoofer, horn-bandpass configuration, 3400W AES, 143dB SPL 2 Long-excursion 18 woofers with 4 voice Impedance: 4Ohm lifier: up to 6800W RMS/ Sensitivity: : Hz External LPF recommended range: 80Hz to 150Hz : Neutrik NL-4 Speakon in/out Cabinet construction: Cabinet made of 18mm multilayer birch plywood Heavy-duty wheels and carrying handles for comfortable positioning and transportation 35mm pole-mount adapter for stands Applications: High-efficiency subwoofer delivering extended, combining advantages of horns (efficiency and directivity control) to those of band-pass systems (extension of to the low spectrum of frequencies) Sound reinforcement of live events in large indoor/outdoor venues, where definition and high pressure levels on low frequencies are required Subwoofer section of multi-amplified sound systems, combined with DAD Touring12H Impedance Low Sensitivity (1W@1m) Suggested x-over connections Measures (WxHxD) TOURING218H Band Pass/Horn 3400W / 6800W up to 6800W RMS/4Ohm 4Ohm Quasi-omnidirectional Hz 2x18 Nd woofer / 4,5 104 db 137/143dB Active 80/150 Hz Neutrik NL4 Speakon in/out 93 Kg 1165x570x860 mm Optional Accessories BAGTOURING218H: Fabric protection for DAD TOURING218H 19

15 TOURING M A D E I N I TA LY POWER POWER series TOURING DAD Touring Power series is a complete range of audio systems, available in both active and passive version, designed to offer levels of sound definition, pressure and fidelity excelling in typical applications of professional audio. According to this logic development of Touring Power series moved towards employment of Powersoft D-class amplifying technologies, DSP control and B&C Speakers components. Advantages of these choices and high ratio between SPL, weight and dimensions allow improved speed of installing procedures and reduced loading volumes. Touring Power series is composed of a large number of loudspeakers, allowing several possibilities of setup. Versatility is improved by reduced weighing, simple hanging hardware, careful design features like double angle of enclosures and horns rotation. For sound reinforcement of large outdoor venues or hi-quality indoor installations, Touring Power systems offer: - D-class amplifiers with swtiching mode power supply high efficiency in ratio between SPL and power consumption selected Neodymium components compact dimensions and limited weighing in relation to SPL output enclosures made in multilayer birch plywood, having thickness up to 24mm built-in hardware for simplified suspended installation

16

17 TOURING POWER series M A D E I N I TA LY 244 mm TOURING208A Active loudspeaker, D-class amplifier, 3-way 700W, 126dB SPL 2x8 woofers with 2 voice, one of which having coaxial design and equipped with 1 HF compression driver, with titanium diaphragm and 1,4 voice 100 x100 (HxV) conical waveguide Electronics: 700W D-class amplifying system Digital Signal Processor with 4 presets (full range-hpf-couplingmonitor) for selection of optimal User control panel: selection of DSP presets, volume, LED level indicator, clip and protection indicators Cabinet construction: Asymmetrical trapezoidal profile, dual-angle (25 /45 ) enclosure 15mm multilayer birch plywood 22 TOURING208P Fast-locking fly-track suspension system or M8 eye bolt over 6 anchoring points 35mm pole-mount adapter for stands : XLR Neutrik in/out; Powercon in/ out Applications: Excellent clarity in reproduction of voice and music for live and recorded performances For sound installations in environments requiring dynamics and high sound pressure Installed into theatres and congress halls owing to excellent acoustic performance Mid-high unit in multi-amplified sound systems combined with DAD subwoofer DSP presets for -fill, near-field and mid-field monitoring, hi-mid section, array mounting 3-way passive loudspeaker, 400W AES, 126dB SPL 2x8 woofers with 2 voice, one of which having coaxial design and equipped with 1 HF compression driver, with titanium diaphragm and 1,4 voice 100 x100 (HxV) conical waveguide Impedance: lifier: up to 800W RMS/ Sensitivity: : Hz : 200/2000Hz External HPF recommended range: 80Hz to 120Hz Passive filter with HF driver protection : Neutrik NL-4 Speakon in/out mm 490 mm 45 side top Techincal TOURING208A TOURING208P Active System 3 way type Passive 3 way amp (W/EIAJ) 700W amp (W/EIAJ) 400W / 800W up to 800W RMS 100 x x100 (HxV) Hz Hz Low 8 woofer Low / 2 8 woofer / 2 Low/High 8 woofer Low/High / 1 driver coaxial 8 woofer / 1 driver coaxial 4dBu (1,228Vrms) 120/126dB (Free Field) 120/126dB 200/2000Hz 200/2000Hz full range-hpf-coupling monitor RMS limiter, fast limiter, temp Trapezoidal taper Neutrik XLR in/out; Powercon connections Neutrik NL4 Speakon in/out in/out 18kg 17kg 240x480x260mm 240x480x260mm Optional Accessories FLYTRACK1-150: Steel rope (6mm diam.) for suspension, ACCA5462 incl., 50cm L FLYTRACK1-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-500: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 50cm L BAGTOURING208: Fabric protection for DAD TOURING208A/TOURING208P ACCA5452: Zinc-plated steel eye-bolt and hook, for suspension of loudspeakers

18 TOURING POWER series M A D E I N I TA LY 340 mm TOURING10A Active loudspeaker, D-class amplifier, 2-way 700W, 126dB SPL 10 woofer with 2.5 voice Nd HF compression driver with 1.4 throat, titanium diaphragm and 3 voice 80 x50 (HxV) constant-directivity waveguide Electronics: 700W D-class amplifying system Digital Signal Processor with 4 presets (full range-hpf-couplingmonitor) for selection of optimal User control panel: selection of DSP presets, volume, LED level indicator, clip and protection indicators Cabinet construction: Asymmetrical trapezoidal profile, dual-angle (45 /25 ) enclosure 15mm multilayer birch plywood mm 570 mm 45 side top Techincal TOURING10A TOURING10P Active 2System way type Passive 2 way 700W amp (W/EIAJ) 2-way passive loudspeaker, 500W amp (W/EIAJ) 250W / 500W AES, 128dB SPL up to 500W RMS 10 woofer with 2.5 voice 80 x50 80 x50 (HxV) Nd HF compression driver with Hz Hz throat, titanium diaphragm and 3 Low 10 woofer Low / woofer / 2.5 voice High 1.4 Nd driver High/ Nd driver / 3 80 x50 (HxV) constant-directivity 4dBu (1,228Vrms) (Free Field) waveguide 120/126dB (Free Field) 122/128dB (Free Field) Impedance: 1400Hz 1400Hz lifier: up to full range-hpf-coupling 500W RMS/ monitor RMS limiter, fast limiter, temp Sensitivity: Trapezoidal taper : Hz Neutrik XLR in/out; connections Neutrik NL4 Speakon in/out Powercon in/out : 1400Hz 21.4kg 22.4kg External HPF recommended range: 340x560x335mm 340x560x335mm 100Hz to 150Hz TOURING10P Fast-locking fly-track suspension system or M8 eye bolt over 6 anchoring points 35mm pole-mount adapter for stands : XLR Neutrik in/out; Powercon in/ out Applications: Excellent clarity in reproduction of voice and music for live and recorded performances For sound installations in environments requiring dynamics and high sound pressure Installed into theatres and congress halls owing to excellent acoustic performance Mid-high unit in multi-amplified sound systems combined with DAD subwoofer DSP presets for -fill, near-field and mid-field monitoring, hi-mid section, array mounting Passive filter with HF driver Optional Accessories FLYTRACK1-150: Steel rope (6mm diam.) for suspension, ACCA5462 incl., 50cm L protection FLYTRACK1-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L : FLYTRACK2-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L Neutrik NL-4 Speakon in/out FLYTRACK2-500: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 50cm L BAGTOURING10: Fabric protection for DAD TOURING10A/TOURING10P ACCA5452: Zinc-plated steel eye-bolt and hook, for suspension of loudspeakers 23

19 TOURING POWER series M A D E I N I TA LY 395 mm mm 620 mm 50 TOURING12A Active loudspeaker, D-class bi-amp, 2-way 1000W+400W, 129dB SPL 12 Nd woofer with 3 voice HF compression driver with 1.4 throat, titanium diaphragm and 3 voice 80 x50 (HxV) constant-directivity waveguide Electronics: 1400W (1000W LF + 400W HF) D-class bi-amp system Digital Signal Processor with 4 presets (full range-hpf-couplingmonitor) for selection of optimal User control panel: selection of DSP presets, volume, LED level indicator, clip and protection indicators Cabinet construction: Asymmetrical trapezoidal profile, dual-angle (30 /50 ) enclosure 18mm multilayer birch plywood 24 TOURING12P Fast-locking fly-track suspension system or M8 eye bolt over 6 anchoring points 35mm pole-mount adapter for stands : XLR Neutrik in/out; Powercon in/ out Applications: Excellent clarity in reproduction of voice and music for live and recorded performances For sound installations in environments requiring dynamics and high sound pressure Installed into theatres and congress halls owing to excellent acoustic performance Mid-high unit in multi-amplified sound systems combined with DAD subwoofers DSP presets for -fill, near-field and mid-field monitoring, hi-mid section, array mounting 2-way passive loudspeaker, 500W AES, 129dB SPL 12 Nd woofer with 3 voice HF compression driver with 1.4 throat, titanium diaphragm and 3 voice 80 x50 (HxV) constant-directivity waveguide Impedance: lifier: up to 1000W RMS/ Sensitivity: : Hz : 1200Hz External HPF recommended range: 90Hz to 150Hz Passive filter with HF driver protection : Neutrik NL-4 Speakon in/out side top TOURING12A TOURING12P Active 2System way type Passive 2 way amp (W/EIAJ) 1400W (1000W LF amp + 400W (W/EIAJ) HF) 500W / 1000W up to 1000W RMS/ 80 x50 80 x50 (HxV) Hz Hz Low 12 Nd woofer Low/ 3 12 Nd woofer / 3 High 1.4 driver High / driver / 3 4dBu (1,228Vrms) (Free Field) 125/131dB (Free Field) 125/131dB (Free Field) 1200Hz 1200Hz full range-hpf-coupling monitor RMS limiter, fast limiter, temp Neutrik NL4 Speakon Neutrik XLR in/out; Powercon connections in/out in/out 28,5kg 30kg 395x614x375mm 395x614x375mm Optional Accessories FLYTRACK1-150: Steel rope (6mm diam.) for suspension, ACCA5462 incl., 50cm L FLYTRACK1-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-500: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 50cm L BAGTOURING12: Fabric protection for DAD TOURING12A/TOURING12P ACCA5452: Zinc-plated steel eye-bolt and hook, for suspension of loudspeakers

20 TOURING POWER series M A D E I N I TA LY 430 mm mm 755 mm 30 TOURING15A Active loudspeaker, D-class bi-amp, 2-way 1000W+400W, 131dB SPL 15 Nd woofer with 3 voice HF compression driver with 2 throat, titanium diaphragm and 3 voice 90 x60 (HxV) constant-directivity waveguide Electronics: 1400W (1000W LF + 400W HF) D-class bi-amp system Digital Signal Processor with 4 presets (full range-hpf-couplingmonitor) for selection of optimal User control panel: selection of DSP presets, volume, LED level indicator, clip and protection indicators Cabinet construction: Asymmetrical trapezoidal profile, dual-angle (45 /30 ) enclosure 18mm multilayer birch plywood TOURING15P Fast-locking fly-track suspension system or M8 eye bolt over 6 anchoring points 35mm pole-mount adapter for stands : XLR Neutrik in/out; Powercon in/ out Applications: Excellent clarity in reproduction of voice and music for live and recorded performances For sound installations in environments requiring dynamics and high sound pressure Installed into theatres and congress halls owing to excellent acoustic performance Mid-high unit in multi-amplified sound systems combined with DAD subwoofer DSP presets for -fill, near-field and mid-field monitoring, hi-mid section, array mounting 2-way passive loudspeaker, 500W AES, 131dB SPL 15 Nd woofer with 3 voice HF compression driver with 2 throat, titanium diaphragm and 3 voice 80 x60 (HxV ) constantdirectivity waveguide Impedance: lifier: up to 1000W RMS/ Sensitivity: : Hz : 1100Hz External HPF recommended range: 80Hz to 150Hz Passive filter with HF driver protection : Neutrik NL-4 Speakon in/out side top TOURING15A TOURING15P Active 2System way type Passive 2 way amp (W/EIAJ) 1400W (1000W + 400W HF) LF amp (W/EIAJ) 500W / 1000W up to 1000W RMS 90 x60 90 x60 (HxV) Hz Hz Low 15 Nd woofer 3 Low/ 15 Nd woofer / 3 High 2 driverhigh / 3 2 driver / 3 4dBu (1,228Vrms) 125/131dB (Free Field) 125/131dB 1100Hz 1100Hz full range-hpf-coupling monitor RMS limiter, fast limiter, temp Neutrik XLR in/out; Powercon Neutrik NL4 Speakon connections in/out in/out 32,5kg 34kg 430x743x405mm 430x743x405mm Optional Accessories FLYTRACK1-150: Steel rope (6mm diam.) for suspension, ACCA5462 incl., 50cm L FLYTRACK1-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-500: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 50cm L BAGTOURING15: Fabric protection for DAD TOURING208A/TOURING208P ACCA5452: Zinc-plated steel eye-bolt and hook, for suspension of loudspeakers 25

21 TOURING POWER series M A D E I N I TA LY 1145 mm 430 mm mm 30 TOURING215A Active loudspeaker, D-class bi-amp, 2-way 1050W+570W, 137dB SPL 2x15 Nd woofers with 3 voice HF compression driver with 2 throat, titanium diaphragm and 3 voice 90 x60 (HxV) constant-directivity waveguide Electronics: 1620W (1050W LF + 570W HF) D-class bi-amp system Digital Signal Processor with 4 presets (full range-hpf-couplingmonitor) for selection of optimal User control panel: selection of DSP presets, volume, LED level indicator, clip and protection indicators Cabinet construction: Asymmetrical trapezoidal profile, dual-angle (45 /30 ) enclosure 26 TOURING215P 18mm multilayer birch plywood Fast-locking fly-track suspension system or M8 eye bolt over 6 anchoring points : XLR Neutrik in/out; Powercon in/out Applications: Excellent clarity in reproduction of voice and music for live and recorded performances For sound installations in environments requiring dynamics and high sound pressure Installed into theatres and congress halls owing to excellent acoustic performance Mid-high unit in multi-amplified sound systems combined with DAD subwoofer DSP presets for -fill, near-field and mid-field monitoring, hi-mid section, array mounting 2-way passive loudspeaker, 2000W AES, 137dB SPL 2x15 Nd woofers with 3 voice HF Compression driver with 2 throat, titanium diaphragm and 3 voice 80 x60 (HxV) constant-directivity waveguide Impedance: 4Ohm lifier: up to 2000W RMS/4Ohm Sensitivity: : Hz : 1100Hz External HPF recommended range: 80Hz to 120Hz Passive filter with HF driver protection : Neutrik NL-4 Speakon in/out side top TOURING215P TOURING215A Passive 2 way Active System 2 way type 1620W (1050W LF + 570W amp (W/EIAJ) amp (W/EIAJ) HF) 1000W / 2000W up to 2000 RMS/4Ohm 4Ohm 90 x60 90 x60 (HxV) Hz Hz Low 2x15 Nd woofer / 3 Low 2x15 woofer / 3 High 2 driver / 3 High 2 driver / 3 4dBu (1,228Vrms) (Free Field) 131/137dB (Free Field) 131/137dB (Free Field) 1100Hz 1100Hz full range-hpf-coupling monitor RMS limiter, fast limiter, temp Trapezoidal taper Neutrik XLR in/out; Powercon connections Neutrik NL4 Speakon in/out in/out 51,5kg 49kg 430x1145x405mm 430x1145x405mm Optional Accessories FLYTRACK1-150: Steel rope (6mm diam.) for suspension, ACCA5462 incl., 50cm L FLYTRACK1-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-500: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 50cm L BAGTOURING215: Fabric protection for DAD TOURING215A/TOURING215P ACCA5452: Zinc-plated steel eye-bolt and hook, for suspension of loudspeakers

22 TOURING POWER series M A D E I N I TA LY 570 mm 645 mm 430 mm TOURING15SA Active subwoofer, 700W D-class amplifier, 131dB SPL 15 woofer with 4 voice Electronics: 700W D-class bi-amp system Digital Signal Processor with 4 presets LPF (150Hz; 120Hz; 100Hz; 80Hz) for selection of optimal User control panel: selection of DSP presets, volume, LED level indicator, clip and protection indicators Cabinet construction: 18mm birch plywoodi 35mm pole-mount adapter for stands : XLR Neutrik in/out; Powercon in/ out TOURING15SP Applications: Subwoofer for reinforcement of low frequencies in live and recorded performance For sound installations in environments requiring dynamics and high sound pressure Installed into theatres and congress halls owing to excellent acoustic performance Subwoofer section of multi-amplified sound systems, combined with DAD Live mid-high loudspeakers DSP presets for setting the optimal depending on the use Passive subwoofer, 700W AES, 131dB SPL 15 woofer with 4 voice Impedance: lifier: up to 1400W RMS/ Sensitivity: : Hz External LPF recommended range: 80Hz to 150Hz : Neutrik NL-4 Speakon in/out amp (W/EIAJ) Low Suggested x-over top TOURING15SA TOURING15SP Active bass System reflextype Passive bass reflex 700W amp (W/EIAJ) 700W / 1400W up to 1400W RMS/ impedance omnidirectional omnidirectional Hz Hz 15 woofer Low/ 4 15 woofer / 4 4dBu (1,228Vrms) sensitivity Max 125/131dB 126/132dB LPF Suggested processedx-over HZ punch-coupling-infra extended low RMS limiter, fast limiter, temp Neutrik XLR in/out; connections Neutrik NL4 Speakon in/out Powercon in/out 30 kg 31 kg Dimensions (WxHxD) 430x560x645mm 430x560x645mm Optional Accessories BAGTOURING15S: Fabric protection for DAD TOURING15SA/TOURING15SP 27

23 TOURING POWER series M A D E I N I TA LY 620 mm 710 mm 561 mm TOURING18SA Active subwoofer, 1500W D-class amplifier, 134dB SPL Long-excursion 18 Nd woofer with 4 voice Electronics: 1500W D-class amplifying system Digital Signal Processor with 4 presets (punch-extended lowcoupling-infra) for selection of optimal User control panel: selection of DSP presets, volume, LED level indicator, clip and protection indicators Cabinet construction: 24mm multilayer birch plywood 35mm pole-mount adapter for stands : XLR Neutrik in/out; Powercon in/ out 28 TOURING18SP Applications: Subwoofer for reinforcement of low frequencies in live and recorded performance For sound installations in environments requiring dynamics and high sound pressure Installed into theatres and congress halls owing to excellent acoustic performance Subwoofer section of multi-amplified sound systems, combined with DAD Live mid-high loudspeakers DSP presets for setting the optimal depending on the use Passive subwoofer, 1500W AES, 134dB SPL Long-excursion Nd 18 woofer with 4 voice Impedance: lifier: up to 3000W RMS/ Sensitivity: : Hz External LPF recommended range: 80Hz to 150Hz : Neutrik NL-4 Speakon in/out amp (W/EIAJ) Low Suggested x-over top TOURING18SA TOURING18SP Active bass System reflextype Passive bass reflex 1500W amp (W/EIAJ) 1500W / 3000W up to 3000W RMS/ impedance omnidirectional omnidirectional Hz Hz 18 Nd woofer Low / 4 18 woofer / 4 4dBu (1,228Vrms) sensitivity (Free Field) 128/134dB (Free Field) 128/134dB (Free Field) LPF Suggested processedx-over Hz punch-extended low coupling-infra RMS limiter, fast limiter, temp Neutrik XLR in/out; connections Neutrik NL4 Speakon in/out Powercon in/out 51kg 49kg 561x700x620mm Dimensions (WxHxD) 561x700x620mm Optional Accessories BAGTOURING18S: Fabric protection for DAD TOURING18SA/TOURING18SP

24 TOURING POWER series M A D E I N I TA LY 565 mm 780 mm 1100 mm TOURING218SA Active subwoofer, 3000W D-class amplifier, 140db SPL 2 long-excursion Nd 18 woofers with 4 voice Electronics: 3000W D-class amplifying system Digital Signal Processor with 4 presets (punch-extended lowcoupling-infra) for selection of optimal User control panel: selection of DSP presets, volume, LED level indicator, clip and protection indicators Cabinet construction: 24mm multilayer birch plywood 35mm pole-mount adapter for stands : XLR Neutrik in/out; Powercon in/ out TOURING218SP Applications: Subwoofer for reinforcement of low frequencies in live and recorded performance For sound installations in environments requiring dynamics and high sound pressure Installed into theatres and congress halls owing to excellent acoustic performance Subwoofer section of multi-amplified sound systems, combined with DAD Live mid-high loudspeakers DSP presets for setting the optimal depending on the use Passive subwoofer, 3000W AES, 140dB SPL 2 long-excursion 18 Nd woofers with 4 voice Impedance: 4Ohm lifier: up to 6000W RMS/4Ohm Sensitivity: : Hz External LPF recommended range: 80Hz to 150Hz : Neutrik NL-4 Speakon in/out top amp (W/EIAJ) Low Suggested x-over TOURING218SA TOURING218SP Active bass System reflextype Passive bass reflex 3000W amp (W/EIAJ) AES / Program 3000W / 6000W up to 6000W RMS/4Ohm impedance 4Ohm omnidirectional omnidirectional Hz Hz 2x18 Nd woofer Low / 4 2x18 Nd woofer / 4 4dBu (1,228Vrms) sensitivity (Free Field) 134/140dB (Free Field) 134/140dB (Free Field) LPF Suggested processedx-over Hz punch-extended low coupling-infra RMS limiter, fast limiter, temp Neutrik XLR in/out; connections Neutrik NL4 Speakon in/out Powercon in/out 92kg 90 kg 1100x560x780mm Dimensions (WxHxD) 1100x560x780mm Optional Accessories BAGTOURING218S: Fabric protection for DAD TOURING218A/TOURING218P 29

25 TOURING POWER series M A D E I N I TA LY 430 mm 410 mm TOURING12MA Active stage-monitor, coaxial design, D-class amp, 2-way 700W, 127dB SPL 12 Nd woofer with 3 voice HF Nd compression driver with 1.4 throat, titanium diaphragm and 3 voice 60 x40 (HxV) modified exponential constant directivity waveguide Electronics: 700W D-class amp system Digital Signal Processor with 4 presets (flat eq-cut 80Hz-cut 60Hzpunch eq) for selection of optimal User control panel: selection of DSP presets, volume, LED level indicator, clip and protection indicators Cabinet construction: Trapezoidal profile, 50 enclosure angle 30 TOURING12MP 18mm multilayer birch plywood Fast-locking fly-track suspension system or M8 eye bolt over 4 anchoring points 35mm pole-mount adapter for stands : XLR Neutrik in/out; Powercon in/ out Applications: Excellent clarity in monitoring of voice and music for live and recorded performances For sound installations in environments requiring dynamics and high sound pressure Installed into theatres and congress halls owing to excellent acoustic performance DSP presets for -fill, near-field and mid-field monitoring, hi-mid section Passive stage-monitor, coaxial design, 2-way 350W AES, 130dB SPL 12 Nd woofer with 3 voice HF Nd compression driver with 1.4 throat, titanium diaphragm and 3 voice 60 x40 (HxV) constant-directivity elliptical waveguide Impedance: lifier: up to 700W RMS/ Sensitivity: : Hz : 1400Hz External HPF recommended range: 80Hz to 150Hz Passive filter with HF driver protection : Neutrik NL-4 Speakon in/out side TOURING12MA TOURING12MP Active 2 way System coaxial type Passive 2 way coaxial amp (W/EIAJ) 700W amp (W/EIAJ) 350W / 700W up to 700W RMS/ impedance 60 x40 60 x40 (HxV) Hz Hz Low 12 Nd woofer Low / 3 12 woofer / 3 High 1.4 Nd High driver / driver / 3 4dBu (1,228Vrms) sensitivity 121/127dB (Free Field) 124/130dB 1400Hz 1400Hz flat eq-cut 80Hz-cut 60Hz punch eq RMS limiter, fast limiter, temp 50 Trapezoidal taper 50 Neutrik XLR in/out; connections Neutrik NL4 Speakon in/out Powercon in/out 16,5kg 18 kg Dimensions (WxHxD) 430x400x558mm 430x400x558mm Optional Accessories FLYTRACK1-150: Steel rope (6mm diam.) for suspension, ACCA5462 incl., 50cm L FLYTRACK1-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-500: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 50cm L BAGTOURING12M: Fabric protection for DAD TOURING12MA/TOURING12MP ACCA5452: Zinc-plated steel eye-bolt and hook, for suspension of loudspeakers

26 TOURING POWER series M A D E I N I TA LY 582 mm 410 mm TOURING15MA Active stage-monitor, coaxial design, D-class amp, 2-way 700W, 127dB SPL 15 Nd woofer with 3 voice HF Nd compression driver with 1.4 throat, titanium diaphragm and 3 voice 60 x40 (HxV) modified exponential constant directivity waveguide Electronics: 700W D-class amp system Digital Signal Processor with 4 presets (flat eq-cut 80Hz-cut 60Hzpunch eq) for selection of optimal User control panel: selection of DSP presets, volume, LED level indicator, clip and protection indicators Cabinet construction: Trapezoidal profile, 50 enclosure angle TOURING15MP 18mm multilayer birch plywood Fast-locking fly-track suspension system or M8 eye bolt over 4 anchoring points 35mm pole-mount adapter for stands : XLR Neutrik in/out; Powercon in/ out Applications: Excellent clarity in reproduction of voice and music for live and recorded performances For sound installations in environments requiring dynamics and high sound pressure Installed into theatres and congress halls owing to excellent acoustic performance DSP presets for -fill, near-field and mid-field monitoring, hi-mid section Passive stage-monitor, coaxial design, 2-way 400W AES, 130dB SPL 15 Nd woofer with 3 voice HF Nd compression driver with 1.4 throat, titanium diaphragm and 3 voice 60 x40 (HxV) constant-directivity elliptical waveguide Impedance: lifier: up to 800W RMS/ Sensitivity: : Hz : 1200Hz External HPF recommended range: 80Hz to 150Hz Passive filter with HF driver protection : Neutrik NL-4 Speakon in/out side amp (W/EIAJ) Low High TOURING15MA TOURING15MP Active 2 way System coaxialtype Passive 2 way coaxial 700W amp (W/EIAJ) 400W / 800W up to 800W RMS/ 60 x40 60 x40 (HxV) Hz Hz 15 Nd woofer Low / 3 15 woofer / Nd driver High / driver / 3 4dBu (1,228Vrms) sensitivity 124/130dB (Free Field) 124/130dB 1200Hz 1200Hz flat eq-cut 80Hz-cut 60Hz punch eq RMS limiter, fast limiter, temp 50 Trapezoidal taper 50 Neutrik XLR in/out; Powercon Neutrik NL4 Speakon connections in/out in/out 22kg 20kg 544x400x558mm Dimensions (WxHxD) 544x400x558mm Optional Accessories FLYTRACK1-150: Steel rope (6mm diam.) for suspension, ACCA5462 incl., 50cm L FLYTRACK1-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-500: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 50cm L BAGTOURING15M: Fabric protection for DAD TOURING15MA/TOURING15MP ACCA5452: Zinc-plated steel eye-bolt and hook, for suspension of loudspeakers 31

27 TOURING POWER series M A D E I N I TA LY TOURING15A TOURING215A TOURING10A TOURING208A TOURING12A Active 2 way Active 2 way Active 2 way Active 3 way Active 2 way (W/EIAJ) 1400W (1000W LFamp + 400W (W/EIAJ) HF) 1620W (1050W LF + 570W HF) 700W amp (W/EIAJ) 1400W (1000W amp (W/EIAJ) 700Wamp (W/EIAJ) LF amp + 400W HF) AES / Program Power AES / Program Power impedance impedance impedance AES / Program Power 80 x50 (HxV) angle 80 x50 (HxV) 90 x60 (HxV) angle 90 x60 (HxV) 100 x Hz Hz Hz Hz Hz 10 woofer /Low Nd wooferlow / 3 15 Nd woofer Low / 3 2x15 Nd woofer / 3 Low 8 woofer /Low 2 High 1.4 Nd driver High / driver /High 3 2 driver /High 3 2 driver / 3 Low/High 8 woofer / 1 driver coaxial 4dBu (1,228Vrms) 4dBu (1,228Vrms) 4dBu (1,228Vrms) 4dBu (1,228Vrms) 4dBu (1,228Vrms) Max(Free 120/126dB Max(Free Field) 125/131dB Max (Free Field) 125/131dB Max(Free Field) 131/137dB (Free Field) 120/126dB Field) 1400Hz 1200Hz 1100Hz 1100Hz 200/2000Hz full range-hpf-coupling-monitor full range-hpf-coupling-monitor full range-hpf-coupling-monitor full range-hpf-coupling-monitor full range-hpf-coupling-monitor RMS limiter, fast limiter, temp RMS limiter, fast limiter, temp RMS limiter, fast limiter, temp RMS limiter, fast limiter, temp RMS limiter, fast limiter, temp Neutrik XLR in/out; Powercon Neutrik XLR in/out; Powercon in/ Neutrik XLR in/out; Powercon Neutrik XLR in/out; Powercon Neutrik XLR in/out; Powercon in/out out in/out in/out in/out 22.4kg 30kg 34kg 51,5kg 18kg 340x560x335mm 395x614x375mm 430x743x405mm 430x1145x405mm 240x480x260mm amp (W/EIAJ) AES / Program Power impedance Low High 32 TOURING15MA TOURING12MA System type Active 2 way coaxial Active 2 way coaxial amp (W/EIAJ) 700W 700W AES / Program Power impedance 60 x40 60 x40 (HxV) Hz Hz 12 Nd woofer / 3 Low 15 Nd woofer / Nd driver / 3 High 1.4 Nd driver / 3 4dBu (1,228Vrms) 4dBu (1,228Vrms) 121/127dB (Free Field) 124/130dB (Free Field) 1400Hz 1200Hz flat eq-cut 80Hz-cut 60Hz- flat eq-cut 80Hz-cut 60Hz punch eq punch eq RMS limiter, fast RMS limiter, fast limiter, temp limiter, temp 50 Trapezoidal taper 50 Neutrik XLR in/out; Neutrik XLR in/out; Powercon in/out Powercon in/out 18 kg 22kg 430x400x558mm 544x400x558mm amp (W/EIAJ) Low Suggested x-over TOURING15SA Active bass System reflex type 700W amp (W/EIAJ) omnidirectional Hz 15 woofer Low / 4 4dBu (1,228Vrms) Max 125/131dB LPF Suggested processed x-over punch-coupling-infra extended low RMS limiter, fast limiter, temp Neutrik XLR in/out; Powercon in/out 31 kg 430x560x645mm TOURING18SA TOURING218SA Active bass System reflextype Active bass reflex 1500W amp (W/EIAJ) 3000W omnidirectional omnidirectional Hz Hz 18 Nd woofer Low / 4 2x18 Nd woofer / 4 4dBu (1,228Vrms) 4dBu (1,228Vrms) 128/134dB (Free Field) 134/140dB (Free Field) LPFSuggested processed x-over LPF processed punch-extended lowpunch-extended low coupling-infra coupling-infra RMS limiter, fast RMS limiter, fast limiter, temp limiter, temp Neutrik XLR in/out; Neutrik XLR in/out; Powercon in/out Powercon in/out 51kg 92kg 561x700x620mm 1100x560x780mm The curves and data are measured in free field over the entire audio band. Below 200 Hz in terms of half-space the related data suffer increments calculated up to 6dB

28 TOURING POWER series Techincal amp (W/EIAJ) Low Low/High connections Techincal TOURING208P Passive 3 way amp (W/EIAJ) AES / Program 400W 800W Power Recommended up to 800W RMS amp 100 x Hz 8 woofer /Low 2 High 8 woofer / 1 driver coaxial 120/126dB 200/2000Hz connections Neutrik NL4 Speakon in/out 17kg 240x480x260mm M A D E I N I TA LY TOURING10P Passive 2 way amp (W/EIAJ) 250W AES / Program 500W Power up to Recommended 500W RMS amp 80 x50 (HxV) angle Hz 10 woofer /Low Nd driver High / 3 (Freesensitivity Field) 122/128dB Max(Free Field) 1400Hz Neutrik NL4 Speakon connections in/out 21.4kg 340x560x335mm TOURING12MP TOURING15MP Passive 2 way System coaxial type Passive 2 way coaxial amp (W/EIAJ) amp (W/EIAJ) AES 350W / Program / 700W Power 400W / 800W up torecommended 700W RMS/ amp up to 800W RMS/ impedance 60 x40 60 x40 (HxV) Hz Hz Low 12 woofer Low/ 3 15 woofer / 3 High 1.4 driver High/ driver / 3 sensitivity Max 124/130dB 124/130dB 1400Hz 1200Hz Trapezoidal 50 taper 50 Neutrik NL4 Speakon Neutrik NL4 Speakon connections connections in/out in/out 16,5kg 20kg 430x400x558mm 544x400x558mm TOURING12P Passive 2 way amp (W/EIAJ) 500W AES//1000W Program Power up to 1000W Recommended RMS/amp 80 x50 (HxV) angle Hz 12 Nd woofer Low / driverhigh / 3 (Free sensitivity Field) 125/131dB Max(Free Field) 1200Hz Neutrik NL4 Speakon connections in/out 28,5kg 395x614x375mm TOURING15P Passive 2 way amp (W/EIAJ) 500W AES//1000W Program Power up torecommended 1000W RMS amp 90 x60 (HxV) angle Hz 15 Nd woofer Low / 3 2 driver High / 3 125/131dB 1100Hz Neutrik NL4 Speakon connections in/out 32,5kg 430x743x405mm TOURING215P Passive 2 way 1000W / 2000W up to 2000 RMS/4Ohm 4Ohm 90 x60 (HxV) Hz 2x15 woofer / 3 2 driver / 3 (Free Field) 131/137dB (Free Field) 1100Hz Neutrik NL4 Speakon in/out 49kg 430x1145x405mm TOURING15SP TOURING18SP TOURING218SP Passive bass System reflextype Passive bass reflextype System Passive bass reflex amp (W/EIAJ) amp (W/EIAJ) amp (W/EIAJ) 700W AES / Program / 1400W Power 1500W /AES 3000W / Program 3000W / 6000W up to 1400W Recommended RMS/ amp up to 3000W RMS/ Recommended amp up to 6000W RMS/4Ohm impedance 4Ohm omnidirectional omnidirectional omnidirectional Hz Hz Hz Low 15 woofer Low / 4 18 woofer / 4 Low 2x18 Nd woofer / 4 sensitivity (Free Field) (Free Field) sensitivity Max 126/132dB 128/134dB (Free Field) 134/140dB (Free Field) Suggested x-over HZ Suggested x-over Hz Suggested x-over Hz connections Neutrik NL4 Speakon connections in/out Neutrik NL4 Speakon in/out Neutrik NL4 Speakon in/out connections 30 kg 49kg 90 kg 430x560x645mm 561x700x620mm 1100x560x780mm 33

29 FUSION series FUSION DAD Fusion is a line of 2-way loudspeakers designed for professional application as /side-fill and stage-monitor, delivering flexibility, quality and sound pressure in typical professional audio environments. According to this logic, Fusion line of speakers (available in both active and passive version) offers several possibilities of configuration, ranging from full-range to multi-amplified systems combined to DAD subwoofers. Active models are equipped with switching mode power supply and biamp technology, D-class for LF sections and AB-class for HFs. Flexibility of Fusion speakers is improved by reduced weighing, LF/HF equalization, integrated hanging hardware for simplified suspension, rotation of horns. For sound reinforcement of outdoor venues or hi-quality indoor installations, Fusion series systems offer: - usage flexibility combined to quality of reproduction and sound pressure - D/AB-class amplifiers with switching mode power supply - compact dimensions and reduced weighing - cabinet built in multilayer birch plywood, having thickness up to 18mm - built-in hardware for simplified suspended installation

30

31 FUSION series 300 mm 495 mm 304 mm FUSION10A Active loudspeaker, D+AB-class biamp, 2-way 350W+70W, 124dB SPL 10 woofer with 2.6 voice HF compression driver with 1 throat, polyimide diaphragm and 1.7 voice 90 x70 (HxV) constant-directivity waveguide Electronics: 420W (350W LF + 70W HF) D+AB-class bi-amp system, with switching mode power supply Analogue processor with crossover function, phase alignment, LF/HF limiter User control panel: Mic/Line in channels with level adjustment, balanced mix output, LF/HF equalization, master volume, limiter indicators 36 FUSION10P Cabinet construction: Trapezoidal profile with 10 angle 15mm multilayer birch plywood Fast-locking fly-track suspension system or M8 eye bolt over 6 anchoring points 35mm pole-mount adapter for stands : XLR in/out connections; AC VDE in Applications: Reproduction of voice and music for live and recorded performances For sound installations in environments requiring dynamics and sound pressure Installed into theatres and congress halls Mid-high unit in multi-amplified sound systems combined with DAD subwoofers 2-way passive loudspeaker, 250W AES, 124dB SPL 10 woofer with 2.6 voice HF Compression driver with 1 throat, polyimide diaphragm and 1.7 voice 90 x70 (HxV) constant-directivity waveguide Impedance: lifier: up to 500W RMS/ Sensitivity: : Hz Passive filter with HF driver protection : 4-pole Speakon in/out side 10 top FUSION10A FUSION10P Active System 2 way type Passive 2 way amp (W/RMS) 420W (350Wamp LF +(W/RMS) 70W HF) 250W / 500W up to 500W RMS/ impedance 90 x70 90 x70 (HxV) Hz Hz Low 10 woofer Low/ 2,5 10 woofer / 2,5 High 1 driver High / driver / 1.7 4dBu (1,228Vrms) sensitivity Max 118/124dB 118/124dB 2000Hz 2000Hz mic, line, master, Usereq. controls LF-HF fast limiter, temp Trapezoidal 10 taper 10 connections XLR in/out; connections VDE in 4 poles in/out connectors 17kg 15kg Dimensions 304x495x300cm (WxHxD) 304x495x300cm Optional Accessories FLYTRACK1-150: Steel rope (6mm diam.) for suspension, ACCA5462 incl., 50cm L FLYTRACK1-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-500: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 50cm L ACCA5452: Zinc-plated steel eye-bolt and hook, for suspension of loudspeakers

32 FUSION series mm 530 mm 361 mm 40 FUSION12A Active loudspeaker, D+AB-class biamp, 2-way 350W+70W, 128dB SPL 12 woofer with 3 voice HF Compression driver with 1 throat, polyimide diaphragm and 1.7 voice 90 x40 (HxV) constant-directivity waveguide Electronics: 420W (350W LF + 70W HF) D+AB-class bi-amp system, with switching mode power supply Analogue processor with crossover function, phase alignment, LF/HF limiter User control panel: Mic/Line in channels with level adjustment, balanced mix output, LF/HF equalization, master volume, limiter indicators Cabinet construction: Asymmetrical trapezoidal profile, FUSION12P dual-angle (45 /10 ) enclosure 15mm multilayer birch plywood Fast-locking fly-track suspension system or M8 eye bolt over 6 anchoring points 35mm pole-mount adapter for stands : XLR in/out connections; AC VDE in Applications: Reproduction of voice and music for live and recorded performances For sound installations in environments requiring dynamics and high sound pressure Installed into theatres and congress halls Mid-high unit in multi-amplified sound systems combined with DAD subwoofers Stage-monitor 2-way passive loudspeaker, 300W AES, 129dB SPL 12 woofer with 3 voice HF Compression driver with 1 throat, polyimide diaphragm and 1.7 voice 90 x70 (HxV) constant-directivity waveguide Impedance: lifier: up to 600W RMS/ Sensitivity: : Hz Passive filter with HF driver protection : 4-pole Speakon in/out side top FUSION12A FUSION12P Active System 2 way type Passive 2 way amp (W/RMS) 420W (350Wamp LF +(W/RMS) 70W HF) 300W / 600W up to 600W RMS/ impedance 90 x70 90 x70 (HxV) Hz Hz Low 12 woofer Low/ 3 12 woofer / 3 High 1 driver High / driver / 1.7 4dBu (1,228Vrms) sensitivity Max 122/128dB 123/129dB 1700Hz 1700Hz mic, line, master, Usereq. controls LF-HF fast limiter, temp Trapezoidal taper XLR in/out; VDE in 4 poles in/out connectors 25kg 23kg Dimensions 361x530x367cm (WxHxD) 361x530x367cm Optional Accessories FLYTRACK1-150: Steel rope (6mm diam.) for suspension, ACCA5462 incl., 50cm L FLYTRACK1-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-500: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 50cm L ACCA5452: Zinc-plated steel eye-bolt and hook, for suspension of loudspeakers 37

33 FUSION series 688 mm 448 mm 400 mm FUSION15A Active loudspeaker, D+AB-class biamp, 2-way 350W+70W, 128dB SPL 15 woofer with 3 voice HF compression driver with 1.4 throat, titanium diaphragm and 3 voice 90 x40 (HxV) constant-directivity waveguide Electronics: 420W (350W LF + 70W HF) D+AB-class bi-amp system, with switching mode power supply Analogue processor with crossover function, phase alignment, LF/HF limiter User control panel: Mic/Line in channels with level adjustment, balanced mix output, LF/HF equalization, master volume, limiter indicators 38 FUSION15P Cabinet construction: Asymmetrical trapezoidal profile, dual-angle (40 /10 ) enclosure 15mm multilayer birch plywood Fast-locking fly-track suspension system or M8 eye bolt over 6 anchoring points 35mm pole-mount adapter for stands : XLR in/out connections; AC VDE in Applications: Reproduction of voice and music for live and recorded performances For sound installations in environments requiring dynamics and high sound pressure Installed into theatres and congress halls Mid-high unit in multi-amplified sound systems combined with DAD subwoofers Stage-monitor 2-way passive loudspeaker, 350W AES, 129dB SPL 15 woofer with 3 voice HF Compression driver with 1.4 throat, titanium diaphragm and 3 voice 90 x40 (HxV) constant-directivity waveguide Impedance: lifier: up to 700W RMS/ Sensitivity: : Hz Passive filter with HF driver protection : 4-pole Speakon in/out side top FUSION15A FUSION15P Active System 2 way type Passive 2 way amp (W/RMS) 420W (350Wamp LF +(W/RMS) 70W HF) 350W / 700W up to 700W RMS/ impedance 90 x40 90 x40 (HxV) Hz Hz Low 15 woofer Low/ 3 15 woofer / 3 High 1.4 driver High/ driver / 3 4dBu (1,228Vrms) sensitivity Max 122/128dB 123/129dB 1500Hz 1500Hz mic, line, master, Usereq. controls LF-HF fast limiter, temp Trapezoidal taper XLR in/out; VDE in 4 poles in/out connectors 32kg 30kg Dimensions 448x688x400cm (WxHxD) 448x688x400cm Optional Accessories FLYTRACK1-150: Steel rope (6mm diam.) for suspension, ACCA5462 incl., 50cm L FLYTRACK1-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-500: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 50cm L ACCA5452: Zinc-plated steel eye-bolt and hook, for suspension of loudspeakers

34 FUSION series 502 mm 370 mm 440 mm FUSION12MA Active stage-monitor, coaxial design, D+AB-class bi-amp, 2-way 350W+70W, 128dB SPL 12 woofer with 2.6 voice HF Compression driver with 1 throat, titanium diaphragm and 1.3 voice 80 x80 (HxV) conical waveguide Electronics: 420W (350W LF + 70W HF) D+AB-class bi-amp system, with switching mode power supply Analogue processor with crossover function, phase alignment, LF/HF limiter User control panel: Mic/Line in channels with level adjustment, balanced mix output, LF/HF equalization, master volume, limiter indicators Cabinet construction: Trapezoidal profile, 40 enclosure angle FUSION12MP 15mm multilayer birch plywood Fast-locking fly-track suspension system or M8 eye bolt over 6 anchoring points 35mm pole-mount adapter for stands : XLR in/out connections; AC VDE in Applications: Stage monitor Reproduction of voice and music for live and recorded performances For sound installations in environments requiring dynamics and high sound pressure Installed into theatres and congress halls Mid-high unit in multi-amplified sound systems combined with DAD subwoofer Passive stage-monitor, coaxial design, 2-way 250W AES, 127dB SPL 12 woofer with 2.6 voice HF Compression driver with 1 throat, titanium diaphragm and 1.3 voice 80 x80 (HxV) conical waveguide Impedance: lifier: up to 500W RMS/ Sensitivity: : Hz Passive filter with HF driver protection : 4-pole Speakon in/out side FUSION12MA Active 2 way System coaxial type amp (W/RMS) 420W (350Wamp LF +(W/RMS) 70W HF) impedance 80 x Hz Low 12 woofer Low/ 2,6 High 1 driver High / 1.7 4dBu (1,228Vrms) sensitivity Max 121/127dB 2000Hz mic, line, master, LF-HF Usereq. controls fast limiter, temp 35 Trapezoidal taper XLR in/out; VDE in 20kg 502x370x440cm Dimensions (WxHxD) top FUSION12MP Passive 2 way coaxial 250W / 500W up to 500W RMS/ 80 x80 (HxV) Hz 12 woofer / 2,6 1 driver / /127dB 2500Hz 35 4 poles in/out 17kg 502x370x440cm Optional Accessories FLYTRACK1-150: Steel rope (6mm diam.) for suspension, ACCA5462 incl., 50cm L FLYTRACK1-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-500: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 50cm L ACCA5452: Zinc-plated steel eye-bolt and hook, for suspension of loudspeakers 39

35 FUSION series 605 mm 420 mm 500 mm FUSION15MA Active stage-monitor, coaxial design, D+AB-class bi-amp, 2-way 350W+70W, 128dB SPL 15 woofer with 3 voice HF Compression driver with 1 throat, titanium diaphragm and 1.7 voice 90 x90 (HxV) conical waveguide Electronics: 420W (350W LF + 70W HF) D+AB-class bi-amp system, with switching-mode power supply Analogue processor with crossover function, phase alignment, LF/HF limiter User control panel: Mic/Line in channels with level adjustment, balanced mix output, LF/HF equalization, master volume, limiter indicators 40 FUSION15MP Cabinet construction: Trapezoidal profile, 40 enclosure angle 15mm multilayer birch plywood Fast-locking fly-track suspension system or M8 eye bolt over 6 anchoring points 35mm pole-mount adapter for stands : XLR in/out connections; AC VDE in Applications: Stage monitor Reproduction of voice and music for live and recorded performances For sound installations in environments requiring dynamics and high sound pressure Installed into theatres and congress halls Mid-high unit in multi-amplified sound systems combined with DAD subwoofer Passive stage-monitor, coaxial design, 2-way 300W AES, 128dB SPL 15 woofer with 3 voice HF Compression driver with 1 throat, titanium diaphragm and 1.7 voice 90 x90 (HxV) conical waveguide Impedance: lifier: up to 600W RMS/ Sensitivity: : Hz Passive filter with HF driver protection : 4-pole Speakon in/out side top FUSION15MA FUSION15MP Active 2 way System coaxial type Passive 2 way coaxial amp (W/RMS) 420W (350Wamp LF + (W/RMS) 70W HF) 300W / 600W up to 600W RMS/ impedance 90 x90 90 x90 (HxV) Hz Hz Low 15 woofer Low/ 3 15 woofer / 3 High 1 driver High / driver / 1.7 4dBu (1,228Vrms) sensitivity Max 122/128dB 122/128dB 1700Hz 2000Hz mic, line, master, Usereq. controls LF-HF fast limiter, temp Trapezoidal 35 taper 35 XLR in/out; ingresso AC VDE 4 poles in/out connectors 29kg 27kg Dimensions 605x420x500cm (WxHxD) 605x420x500cm Optional Accessories FLYTRACK1-150: Steel rope (6mm diam.) for suspension, ACCA5462 incl., 50cm L FLYTRACK1-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-300: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 30cm L FLYTRACK2-500: Steel rope (6mm diam.) for suspension, ACCA5452 incl., 50cm L ACCA5452: Zinc-plated steel eye-bolt and hook, for suspension of loudspeakers

36 FUSION series FUSION15A FUSION10A FUSION12A Active 2 way Active System 2 way type Active System 2 way type amp (W/RMS) 420W (350Wamp LF + (W/RMS) 70W HF) 420W (350W amp LF + (W/RMS) 70W HF) 420W (350W LF + 70W HF) 90 x40 (HxV) 90 x70 90 x Hz Hz Hz Low/ 15 woofer / 3 Low 10 woofer Low / 2,5 12 woofer 3 High 1.4 driver / 3 High 1 driver High / driver / 1.7 4dBu (1,228Vrms) 4dBu (1,228Vrms) 4dBu (1,228Vrms) Max 122/128dB Max 118/124dB 122/128dB 1500Hz 2000Hz 1700Hz Usereq. controls mic, line, master, Usereq. controls LF-HF mic, line, master, LF-HF mic, line, master, eq. LF-HF fast limiter, temp fast limiter, temp fast limiter, temp Trapezoidal taper Trapezoidal 10 taper XLR in/out; VDE in connections XLR in/out; VDE in XLR in/out; VDE in 32kg 17kg 25kg 448x688x400cm 304x495x300cm 361x530x367cm FUSION15MA FUSION12MA System Active 2 way coaxial Active 2 way coaxialtype amp (W/RMS) amp (W/RMS) 420W (350W LF + 70W HF) 420W (350W LF + 70W HF) 90 x90 (HxV) 80 x Hz Hz 15 woofer / 3 Low 12 wooferlow / 2,6 1 driver / 1.7 High 1 driverhigh / 1.7 4dBu (1,228Vrms) 4dBu (1,228Vrms) 122/128dB 121/127dB 1700Hz 2000Hz User mic, line, master, eq.controls LF-HF mic, line, master, eq. LF-HF fast limiter, temp fast limiter, temp Trapezoidal taper XLR in/out; ingresso AC VDE XLR in/out; VDE in 29kg 20kg 605x420x500cm 502x370x440cm FUSION10P FUSION12P FUSION15P Passive System 2 way type Passive System 2 way type Passive 2 way amp (W/RMS) amp (W/RMS) amp (W/RMS) AES 250W / Program / 500W Power AES 300W / Program / 600W Power 350W / 700W up torecommended 500W RMS/ amp up torecommended 600W RMS/ amp up to 700W RMS/ impedance impedance 90 x70 90 x70 90 x40 (HxV) Hz Hz Hz Low 10 woofer Low / 2,5 12 woofer Low/ 3 15 woofer / 3 High 1 driver High / driver High / driver / 3 sensitivity sensitivity Max 118/124dB Max 123/129dB 123/129dB 2000Hz 1700Hz 1500Hz Trapezoidal 10 taper Trapezoidal taper connections 4 poles in/out connectors 4 poles in/out connectors 4 poles in/out connectors 15kg 23kg 30kg 304x495x300cm Dimensions 361x530x367cm (WxHxD) 448x688x400cm amp (W/RMS) Low High FUSION12MP FUSION15MP Passive 2 way System coaxial type Passive 2 way coaxial amp (W/RMS) AES 250W / Program / 500W Power 300W / 600W up torecommended 500W RMS/ amp up to 600W RMS/ impedance 80 x80 90 x90 (HxV) Hz Hz 12 woofer Low / 2,6 15 woofer / 3 1 driverhigh / driver / 1.7 sensitivity Max 121/127dB 122/128dB 2500Hz 2000Hz Trapezoidal 35 taper 35 4 poles in/out 4 poles in/out connectors 17kg 27kg 502x370x440cm 605x420x500cm The curves and data are measured in free field over the entire audio band. Below 200 Hz in terms of half-space the related data suffer increments calculated up to 6dB 41

37 LIVE series 245 mm side 435 mm 255 mm LIVE8AWH LIVE8A Active loudspeaker, AB-class biamp, 2-way 100W+50W, 117dB SPL 8 woofer with 2 voice HF compression driver with 1 throat, titanium diaphragm and 1.3 voice 80 x60 (HxV) constant-directivity rotatable waveguide Electronics: 150W (100W LF + 50W HF) ABclass bi-amp system Analogue processor with crossover function, equalization, phase alignment User control panel: 2 input channels (Mic + Line) with independent volume adjustment, 1 balanced mix output, signal and clip indicators Cabinet construction: Symmetrical trapezoidal profile 42 LIVE8 with 60 angle Polypropylene enclosure, designed for stage-monitor application Available in matte black (LIVE8ABK) or white (LIVE8AWH) finishing 5 fastening points (M6 type) for suspension 35mm pole-mount adapter for stands : XLR in/out and Jack balanced input connections; AC VDE in Applications: Reproduction of voice and music for live and recorded performances For portable PA systems, mobile DJ sets and voice/multimedia applications For sound installations in small to medium-sized environments Mid-high unit in multi-amplified sound systems combined with DAD subwoofers Stage-monitor Passive stage-monitor, coaxial design, 2-way 300W AES, 128dB SPL 15 woofer with 3 voice HF Compression driver with 1 throat, titanium diaphragm and 1.7 voice 90 x90 (HxV) conical waveguide Impedance: lifier: up to 600W RMS/ Sensitivity: : Hz Passive filter with HF driver protection : 4-pole Speakon in/out bottom LIVE8A LIVE8 Active System 2 way type Passive 2 way amp (W/RMS) 150W (100Wamp LF + (W/RMS) 50W HF) 120W / 240W up to 240W RMS/ impedance 80 x60 80 x60 (HxV) Hz Hz Low 8 woofer Low/ 2 8 woofer / 2 High 1 driver / 1.3 High 1 driver / 1.3-2dBu (0,6Vrms) adjustable sensitivity 111/117dB Max 114/120dB 3500Hz 2000Hz mic,user line controls fast limiter, temp 60 Trapezoidal taper 60 XLR in/out; VDE in 4 poles in/out connectors 9,5kg 8kg 255x435x245mm Dimensions (WxHxD) 255x435x245mm Optional Accessories BAGLIVE8: Fabric protection for LIVE8/LIVE8A

38 LIVE series 313 mm side 557 mm 330 mm LIVE10A Active loudspeaker, AB-class biamp, 2-way 250W+50W, 122dB SPL 10 woofer with 2.6 voice HF compression driver with 1 throat, titanium diaphragm and 1.3 voice 80 x60 (HxV) constant-directivity rotatable waveguide Electronics: 300W (250W LF + 50W HF) ABclass bi-amp system Analogue processor with crossover function, equalization, phase alignment User control panel: 2 input channels (Mic + Line) with independent volume adjustment, 1 balanced mix output, signal and clip indicators Cabinet construction: Symmetrical trapezoidal profile with 60 angle LIVE10 Polypropylene enclosure, designed for stage-monitor application Matte black finishing 5 fastening points (M8 type) for suspension 35mm pole-mount adapter for stands, side-handle for transportation : XLR in/out and Jack balanced input connections; AC VDE in Applications: Reproduction of voice and music for live and recorded performances For portable PA systems, mobile DJ sets and voice/multimedia applications For sound installations in small to medium-sized environments Mid-high unit in multi-amplified sound systems combined with DAD subwoofers Stage-monitor 2-way passive loudspeaker, 250W AES, 125dB SPL 10 woofer with 2.6 voice HF Compression driver with 1 throat, titanium diaphragm and 1.3 voice 80 x60 (HxV) constant-directivity rotatable waveguide Impedance: lifier: up to 500W RMS/ Sensitivity: : Hz Passive filter with HF driver protection : 4-pole Speakon in/out bottom LIVE10A LIVE10 Active System 2 way type Passive 2 way amp (W/RMS) 300W (250Wamp LF +(W/RMS) 50W HF) 250W / 500W up to 500W RMS/ impedance 80 x60 80 x60 (HxV) Hz Hz Low 10 woofer Low/ 2,6 10 woofer / 2,6 High 1 driver / 1.3 High 1 driver / 1.3-2dBu (0,6Vrms) adjustable (Free Field) 116/122dB (Free Field) 119/125dB (Free Field) 2500Hz 2200Hz mic,user line, controls fast limiter, temp 60 Trapezoidal taper 60 XLR in/out; VDE in 4 poles in/out connectors 20,5kg 15.8kg 475x740x400mm Dimensions (WxHxD) 475x740x400mm Optional Accessories BAGLIVE10: Fabric protection for LIVE10/LIVE10A 43

39 LIVE series 365 mm side 615 mm 416 mm LIVE12A Active loudspeaker, AB-class biamp, 2-way 330W+70W, 124dB SPL 12 woofer with 3 voice HF compression driver with 1 throat, titanium diaphragm and 1.7 voice 80 x60 (HxV) constant-directivity rotatable waveguide Electronics: 400W (330W LF + 70W HF) AB-class bi-amp system Analogue processor with crossover function, equalization, phase alignment, LF/HF limiter User control panel: 3 input channels (2 Mic + 1 Line) with independent volume adjustment, 1 balanced mix output, LF/HF equalization, master volume, signal, limiter and protection indicators Cabinet construction: Symmetrical trapezoidal profile with 45 angle 44 LIVE12 Polypropylene enclosure, designed for stage-monitor application Matte black finishing 5 fastening points (M8 type) for suspension 35mm pole -mount adapter for stands, side -handle for transportation : XLR in/out and Jack balanced input connections; AC VDE in Applications: Reproduction of voice and music for live and recorded performances For indoor/outdoor sound installations where quality and sound pressure are required For portable PA systems, mobile DJ sets and voice/multimedia applications Permanent installation in theaters and congress halls Mid-high unit in multi-amplified sound systems combined with DAD subwoofers Stage-monitor 2-way passive loudspeaker, 300W AES, 129dB SPL 12 woofer with 3 voice HF Compression driver with 1 throat, titanium diaphragm and 1.7 voice 80 x60 (HxV) constant-directivity rotatable waveguide Impedance: lifier: up to 600W RMS/ Sensitivity: : Hz Passive filter with HF driver protection : 4-pole Speakon in/out bottom LIVE12A LIVE12 Active System 2 way type Passive 2 way amp (W/RMS) 400W (330Wamp LF +(W/RMS) 70W HF) 300W / 600W up to 600W RMS/ impedance 80 x60 80 x60 (HxV) Hz Hz Low 12 woofer 3 Low / 12 woofer / 3 High 1 driver / 1.7 High 1 driver / 1.7-2dBu (0,6Vrms) adjustable 122/128dB Max 123/129dB 2200Hz 2000Hz mic, line, master, LF-HF Usereq. controls fast limiter, temp 45 Trapezoidal taper 45 XLR in/out; VDE in 4 poles in/out connectors 25kg 21kg 416x615x356mm Dimensions (WxHxD) 416x615x356mm Optional Accessories BAGLIVE12: Fabric protection for LIVE12/LIVE12A

40 LIVE series 400 mm side 740 mm 475 mm LIVE15A Active loudspeaker, AB-class bi-amp, 2-way 380W+70W, 124dB SPL 15 woofer with 3 voice HF compression driver with 1 throat, titanium diaphragm and 1.7 voice 80 x60 (HxV) constant-directivity rotatable waveguide Electronics: 450W (380W LF + 70W HF) AB-class bi-amp system Analogue processor with crossover function, equalization, phase alignment User control panel: 3 input channels (2 Mic + 1 Line) with independent volume adjustment, 1 balanced mix output, LF/HF equalization, master volume, signal, limiter and protection indicators Cabinet construction: Symmetrical trapezoidal profile with 45 angle Polypropylene enclosure, designed bottom LIVE15 for stage-monitor application Matte black finishing 5 fastening points (M8 type) for suspension 35mm pole -mount adapter for stands, side-handles for transportation : XLR in/out and Jack balanced input connections; AC VDE in Applications: Reproduction of voice and music for live and recorded performances For indoor/outdoor sound installations where quality and sound pressure are required For portable PA systems, mobile DJ sets and voice/multimedia applications Permanent installation in theaters and congress halls Mid-high unit in multi-amplified sound systems combined with DAD subwoofers Stage-monitor 2-way passive loudspeaker, 350W AES, 129.5dB SPL 15 woofer with 3 voice HF Compression driver with 1.7 throat, titanium diaphragm and 1.7 voice 80 x60 (HxV) constant-directivity rotatable waveguide Impedance: lifier: up to 700W RMS/ Sensitivity: : Hz Passive filter with HF driver protection : 4-pole Speakon in/out LIVE15 LIVE15A Passive 2 way Active System 2 way type amp (W/RMS) 450W (380Wamp LF +(W/RMS) 70W HF) 350W / 700W up to 700W RMS/ impedance 80 x60 (HxV) 80 x Hz Hz Low/ 15 woofer / 3 Low 15 woofer 3 High 1 driver / 1.7 High 1 driver / dBu (0,6Vrms) adjustable Max 123/129dB 122/128dB 1700Hz 2600Hz Usereq. controls mic, line, master, LF-HF fast limiter, temp Trapezoidal taper poles in/out connectors XLR in/out; VDE in 25kg 30kg Dimensions (WxHxD) 475x740x400mm 475x740x400mm Optional Accessories BAGLIVE15: Fabric protection for LIVE15/LIVE15A 45

41 LIVE series 480 mm 590 mm 400 mm LIVE12SA Bass-reflex active subwoofer, 600W AB-class amplifier, 126dB SPL 12 long-excursion woofer with 3 voice Electronics: 600W AB-class bi-amp system Analogue processor with crossover, equalization and limiter User control panel: 2 input channels (1 balanced + 1 unbalanced), LPF adjustment (80-165Hz), balanced output with HPF adjustment (3 options: THRU, 80Hz, 125Hz), master volume, signal, limiter and protection indicators Phase reverse switch Cabinet construction: 18mm multilayer birch plywood 46 35mm pole-mount adapter for stands 16 fastening points (M10 type) for suspension : XLR in/out and RCA input connections; AC VDE in Applications: Subwoofer for reinforcement of low frequencies in live and recorded performance Subwoofer section of multi-amplified sound systems, combined with DAD Live mid-high loudspeakers Sound reinforcement in permanents installations or mobile sets Subwoofer section of multi-amplified sound systems, combined with DAD Live full-range loudspeakers side amp (W/RMS) Low Xover Freq(LPF) Xover Freq(HPF) out LIVE12SA Active - bass reflex 600W Hz 12 woofer / 3-2dBu(0,6Vrms)adjustable 118/126dB Hz adjustable Through / 80 / 125Hz master,lpf,hpf,phase,limit fast limiter, temp XLR in/out/rca ; VDE in 32kg 400x480x590mm top

42 LIVE series 580 mm 605 mm 500 mm LIVE15SA Double-reflex active subwoofer, 600W AB-class amplifier, 130dB SPL 15 long-excursion woofer with 4 voice Electronics: 600W AB-class bi-amp system Analogue processor with crossover, equalization and limiter User control panel: 2 input channels (1 balanced + 1 unbalanced), LPF adjustment (80-165Hz), balanced output with HPF adjustment (3 options: THRU, 80Hz, 125Hz), master volume, signal, limiter and protection indicators Phase reverse switch. Cabinet construction: 18mm multilayer birch plywood 35mm pole-mount adapter for stands, side-handles for transportation 16 fastening points (M10 type) for suspension side top LIVE15S : XLR in/out and RCA input connections; AC VDE in Applications: Subwoofer for reinforcement of low frequencies in live and recorded performance Subwoofer section of multi-amplified sound systems, combined with DAD Live mid-high loudspeakers Sound reinforcement in permanents installations or mobile sets Subwoofer section of multi-amplified sound systems, combined with DAD Live full-range loudspeakers Double-reflex passive subwoofer, 500W AES, 130dB SPL Long-excursion 15 woofer with 4 voice Impedance: lifier: up to 1000W RMS/ Sensitivity: : Hz External LPF recommended range: 80Hz to 150Hz : 4-pole Speakon in/out LIVE15SA LIVE15S Active - dual reflextype System Passive dual reflex amp (W/RMS) 600W amp (W/EIAJ) AES/Program Power 500W / 1000W up to 1000W RMS/ impedance Hz angle omnidirectional Low 15 woofer / Hz -2dBu(0,6Vrms)adjustable Low 15 woofer / 4 124/130dB Xover Freq(LPF) 80 Max - 165Hz adjustable 124/130dB Xover Freq(HPF) out Through / 80 / 125Hz Suggested x-over Hz master,lpf,hpf,phase,limit fast limiter, temp XLR in/out/rca ; VDE in 4 poles in/out connectors 49kg 42 kg 450x555x720mm Dimensions (WxHxD) 450x555x720mm 47

43 LIVE series LIVE18SA Double-reflex active subwoofer, 600W AB-class amplifier, 130dB SPL 18 long-excursion woofer with 4 voice Electronics: 600W AB-class bi-amp system Analogue processor with crossover, equalization and limiter User control panel: 2 input channels (1 balanced + 1 unbalanced), LPF adjustment (80-165Hz), balanced output with HPF adjustment (3 options: THRU, 80Hz, 125Hz), master volume, signal, limiter and protection indicators Phase reverse switch Cabinet construction: 18mm multilayer birch plywood 35mm pole-mount adapter for stands, side-handles for transportation 48 LIVE18S 16 fastening points (M10 type) for suspension : XLR in/out and RCA input connections; AC VDE in Applications: Subwoofer for reinforcement of low frequencies in live and recorded performance Subwoofer section of multi-amplified sound systems, combined with DAD Live mid-high loudspeakers Sound reinforcement in permanents installations or mobile sets Subwoofer section of multi-amplified sound systems, combined with DAD Live full-range loudspeakers Double-reflex passive subwoofer, 500W AES, 130dB SPL Long-excursion 18 woofer with 4 voice Impedance: lifier: up to 1000W RMS/ Sensitivity: : Hz External LPF recommended range: 80Hz to 150Hz : 4-pole Speakon in/out 617 mm 634 mm 536 mm top LIVE18S LIVE18SA System Passive dual reflex Active - dual reflextype 600W amp (W/EIAJ) amp (W/RMS) 500W / 1000W up to 1000W RMS/ impedance omnidirectional Hz angle Hz Low 18 woofer / 4 Low 18 woofer / 4-2dBu(0,6Vrms)adjustable 124/130dB 124/130dB Xover Freq(LPF) 80 Max - 165Hz adjustable Suggested x-over Hz Xover Freq(HPF) out Through / 80 / 125Hz master,lpf,hpf,phase,limit fast limiter, temp 4 poles in/out connectors XLR in/out/rca ; VDE in 47 kg 56kg Dimensions (WxHxD) 535x645x680mm 535x645x680mm

44 LIVE series 231 mm 585 mm LIVEPACK1500D Active audio system, 1 subwoofer and 2 tops, D-class bi-amp, 3-way 1000W+2x250W, 130dB Tops: 8 woofer with 2 voice ; HF compression driver with 1 throat and 1.3 voice ; 80 x60 (HxV) constant-directivity waveguide Subwoofer: 15 long-excursion woofer with 4 voice, bass-reflex configuration Electronics: 1500W (1000W SW + 2x250W LF+HF) D-class bi-amp, 3 separate modules placed into the subwoofer Analogue processor with balance, crossover, equalization, phase alignment and limiter User control panel: 2 Mic input channels, balanced L-R input, unbalanced L-R input, LPF adjustment (80-180Hz), balanced output with HPF adjustment (3 options: 22Hz, 80Hz, 125Hz) Master and LF volume controls, LF-HF equalization, signal, limiter and protection indicators Phase reverse switch Subwoofer cabinet construction: 18mm multilayer birch plywood 35mm pole-mount adapter for stands, sidehandles for transportation 16 fastening points (M10 type) for suspension : XLR in/out and RCA input connections; AC VDE in Applications: Plug and play system, high flexibility in portable and mobile audio applications Reproduction of voice and music for live and recorded performances For portable PA systems, mobile DJ sets and voice/multimedia applications For indoor/outdoor sound installations where quality and sound pressure are required top LIVEPACK1500D Passive - 2 way 150W / 300W Impedance 90 x60 (HxV) 80/ Hz Response (±3 db) Low 8 woofer, 2 High 1 driver, 1,3 114/120dB (Free Field) 2500HZ HF signal compression 75 XLR 9Kg Dimension (WxHxD) 231x420x250 mm mm 420 mm 450 mm 550 mm 15 amp (W/RMS) amp (W/RMS) impedence Response Low Xover Freq (LPF) Xover Freq(HPF) out Dimension (WxHxD) side top LIVEPACK1500D Active Subwoofer LF 1000W MF-HF 2x Hz (±3 db) 15 woofer 4-2dBu (0,6Vrms) adjustable 124/130dB (Free Field) Hz adjustable 22/80/125Hz master, LPF, HPF, phase, limit, Eq LF-HF fast limiter, temp XLR in/out/rca; VDE in 40Kg 585x450x550 mm 49

45 LIVE series LIVE15A LIVE12A LIVE10A LIVE8A Active 2 way Active System 2 way type Active System 2 way type Active System 2 way type amp (W/RMS) 150W (100Wamp LF + (W/RMS) 50W HF) 300W (330Wamp LF +(W/RMS) 70W HF) 450W (380W LF + 70W HF) (250Wamp LF +(W/RMS) 50W HF) 400W Accessori impedance (opzionali) 80 x60 (HxV) 80 x60 80 x60 80 x Hz Hz Hz Hz Low/ 15 woofer / 3 Low 8 woofer Low/ 2,6 12 woofer 3 Low/ 2 10 woofer High 1 driver / 1.7 High 1 driver / 1.3 High 1 driver / 1.7 High 1 driver / 1.3-2dBu (0,6Vrms) -2dBu (0,6Vrms) -2dBu (0,6Vrms) -2dBu (0,6Vrms) adjustable adjustable adjustable adjustable Max 122/128dB 111/117dB 122/128dB Max 116/122dB (Free Field) 2600Hz 3500Hz 2200Hz 2500Hz Usereq. controls mic,user line controls LF-HF mic, line, master, eq. LF-HF mic,user line, controls mic, line, master, fast limiter, temp fast limiter, temp fast limiter, temp fast limiter, temp Trapezoidal taper Trapezoidal taper 45 Trapezoidal taper 60 XLR in/out; VDE in XLR in/out; VDE in XLR in/out; VDE in XLR in/out; VDE in 30kg 9,5kg 25kg 20,5kg 475x740x400mm 255x435x245mm 416x615x356mm 475x740x400mm LIVE10 LIVE8 Passive System 2 way type Passive System 2 way type amp (W/RMS) amp (W/RMS) amp (W/RMS) AES / Program AES 120W / Program / 240W Power 250W / 500WPower Recommended amp up torecommended 240W RMS/ amp up to 500W RMS/ impedance impedance 80 x60 80 x Hz Hz Low/ 2,6 Low 8 woofer Low/ 2 10 woofer High High 1 driver High / driver / 1.3 (Free sensitivity sensitivity Field) Max 114/120dB 119/125dB (Free Field) 2000Hz 2200Hz Trapezoidal taper Trapezoidal 60 taper 60 4 poles in/out connectors 4 poles in/out connectors 8kg 15.8kg 255x435x245mm 475x740x400mm 50 LIVE12 LIVE15 Passive System 2 way type Passive 2 way amp (W/RMS) 300W / 600W Power AES / Program 350W / 700W up torecommended 600W RMS/ amp up to 700W RMS/ impedance 80 x60 80 x60 (HxV) Hz Hz 12 woofer 3 Low/ 15 woofer / 3 1 driver / 1.7 High 1 driver / 1.7 sensitivity 123/129dB Max 123/129dB 2000Hz 1700Hz 45 Trapezoidal taper 45 4 poles in/out connectors 4 poles in/out connectors 21kg 25kg 416x615x356mm 475x740x400mm Optional Accessories BAGLIVE Reinforced nylon case. Expressly designed for DAD LIVE Series loudspeaker protection/transport. It opens on any side by means of zips or Velcro straps. Slit for side handles. opening to allow wiring. The opening allows the use of the loudspeaker with the case on. Stand coupling ready. AS285 Black powder-coated steel bracket. Specifically designed for wall-mounting of LIVE8/LIVE8A speakers. Vertical and horizontal adjustment Inclination: 30 max Black finish Hardware for speaker mounting included AS255 Wall-mount metal support for acoustic speakers Standard 35 mm pole. Junction with horizontal and vertical adjustment. Max tilt: 30. Length: max 390 mm. Height: 250 mm. Load: max 60 Kgs. Matte black finish. : 2,9 Kgs. The curves and data are measured in free field over the entire audio band. Below 200 Hz in terms of half-space the related data suffer increments calculated up to 6dB

46 LIVE series LIVE12SA LIVE15SA LIVE18SA Active - bass System reflextype Active - dual System reflextype Active - dual reflex amp (W/RMS) 600W amp (W/RMS) 600W amp (W/RMS) 600W AES/Program Power Hz Hz Hz Low 12 woofer Low/ 3 15 woofer Low/ 4 18 woofer / 4-2dBu(0,6Vrms)adjustable -2dBu(0,6Vrms)adjustable -2dBu(0,6Vrms)adjustable Max 118/126dB Max 124/130dB 124/130dB Xover Freq(LPF) Hz Xover adjustable Freq(LPF) Hz Xover adjustable Freq(LPF) Hz adjustable Xover Freq(HPF) out Through Xover/Freq(HPF) 80 / 125Hzout Through Xover/ Freq(HPF) 80 / 125Hzout Through / 80 / 125Hz master,lpf,hpf,phase,limit master,lpf,hpf,phase,limit master,lpf,hpf,phase,limit fast limiter, temp fast limiter, temp fast limiter, temp XLR in/out/rca ; VDE in XLR in/out/rca ; VDE in XLR in/out/rca ; VDE in 32kg 49kg 56kg 400x480x590mm 450x555x720mm 535x645x680mm LIVEPACK1500D Active Subwoofer amp (W/RMS) LF 1000W amp (W/RMS) MF-HF 2x250 impedence Response Hz (±3 db) Low 15 woofer 4-2dBu (0,6Vrms) adjustable 124/130dB (Free Field) Xover Freq (LPF) Hz adjustable Xover Freq(HPF) out 22/80/125Hz master, LPF, HPF, phase, limit, Eq LF-HF fast limiter, temp XLR in/out/rca; VDE in 40Kg Dimension (WxHxD) 585x450x550 mm LIVE15S LIVE18S Passive dual System reflex type Passive dual reflex amp (W/EIAJ) amp (W/EIAJ) AES 500W / Program / 1000WPower 500W / 1000W up torecommended 1000W RMS/ amp up to 1000W RMS/ impedance omnidirectional omnidirectional Hz Hz Low 15 woofer Low/ 4 18 woofer / 4 sensitivity Max 124/130dB 124/130dB Suggested x-over Hz Suggested x-over Hz 4 poles in/out connectors 4 poles in/out connectors 42 kg 47 kg 450x555x720mm 535x645x680mm LIVEPACK1500D Passive - 2 way 150W / 300W Impedance 90 x60 (HxV) Response 80/ Hz (±3 db) Low 8 woofer, 2 High 1 driver, 1,3 114/120dB (Free Field) 2500HZ 75 XLR 9Kg Dimension (WxHxD) 231x420x250 mm 51

47 IKOS series IKOS The new series IKOS is composed by the most versatile, easily transportable and economic speakers IKOS that DAD can offer. Wherever you carry your music, IKOS series speakers are able to produce a powerful sound quality with a considerable saving of space and time to install. The models IKOS 12A and IKOS 15A have a built-in MP3 player with SD card and USB port equipped with illuminated display. This simplifies their use for many types of applications such as schools, kindergartens, churches, gyms, multimedia presentations. he USB / SD-Card-Player can be used directly or via the infrared remote control supplied from the or the back of the speaker. Just plug in the USB stick or SD card, and leave on the music. It is planned the connectivity to external sound sources such as microphone and CD player. The mixer between the different audio sources is integrated and has a 5-band equalizer. Ergonomic handles and a standard 35mm support complete the versatility. Models available are 8, 10, 12 and 15 both amplified and passives, made with a new design, durable, lightweight structure.

48

49 IKOS series 205 mm 390 mm 270 mm 54 IKOS8A IKOS8P 120W RMS active acoustic loudspeaker for live and recorded applications Excellent sound and high sound pressure into a compact and lightweight enclosure 8 woofer for reproduction of low-mid range The 1 compression driver is mounted on a horn with 90 x45 dispersion angle Cabinet designed for stage-monitor applications Polypropylene box equipped with an handle in the upper side 35 mm adapter for speaker stands section: 1 microphone (6,3mm Jack + 3p XLR), 1 line (RCA + 3p XLR) Output section: 1 line out (6,3mm Jack) Independent Bass and Treble controls CLIP and POWER indicators for diagnostics through LEDs 120W AES passive acoustic loudspeaker for live and recorded applications Excellent sound and high sound pressure into a compact and lightweight enclosure 8 woofer for reproduction of low-mid range The 1 compression driver is mounted on a horn with 90 x45 dispersion angle Cabinet designed for stage-monitor applications Polypropylene box equipped with an handle in the upper side 35 mm adapter for speaker stands amp (W/RMS) Low High /indicator AC IKOS 8A Active 120W amp (W/RMS) 90 x Hz 8 woofer Low / 1,5 1 driver High / 1.4 4dBu (1,23Vrms) adjustable sensitivity 114/120dB (Free Field) 3300Hz mic, line,master vol,treble, bass temp./clip power 45 Trapezoidal taper XLR/Jack bal. Pin RCA unbal. VDE in 230 V AC 50HzAC 7.1kg 260x395x210mm side IKOS 8P Passive 120W/240W up to 240W RMS/ 90 x45 (HxV) Hz 8 woofer / 1,5 1 driver / 1.4 (Free Field) 114/120dB (Free Field) 3300Hz 45 4 poles in/out connectors 5kg 260x395x210mm

50 IKOS series 260 mm 500 mm 345 mm IKOS10A IKOS10P 150W RMS active acoustic loudspeaker for live and recorded applications Excellent sound and high sound pressure into a compact and lightweight enclosure 10 woofer for reproduction of low-mid range The 1 compression driver is mounted on a horn with 90 x45 dispersion angle Cabinet designed for stage-monitor applications Polypropylene box equipped with two side handles, one in the upper side and two wheels for the transport integrated 35 mm adapter for speaker stands section: 1 microphone (6,3mm Jack + 3p XLR), 1 line (RCA + 3p XLR) Output section: 1 line out (6,3mm Jack) Independent Bass and Treble controls CLIP and POWER indicators for diagnostics through LEDs 150W AES passive acoustic loudspeaker for live and recorded applications Excellent sound and high sound pressure into a compact and lightweight enclosure 10 woofer for reproduction of low-mid range The 1 compression driver is mounted on a horn with 90 x45 dispersion angle Cabinet designed for stage-monitor applications Polypropylene box equipped with two side handles, one in the upper side and two wheels for the transport integrated 35 mm adapter for speaker stands amp (W/RMS) Low High /Indicator AC IKOS 10A Active 150W amp (W/RMS) 90 x45 (HxV) Hz 10 woofer / Low 1,5 1 driver / 1.4 High 4dBu (1.23Vrms) adjustable sensitivity 115/121dB Field) Max(Free 3000Hz mic, line,master vol,treble, bass temp./clip power 45 XLR/Jack bal. Pin RCA unbal. VDE in 230 V AC 50Hz AC 9.5kg 345x505x265mm side IKOS 10P Passive 150W/300W up to 300W RMS/ 90 x45 (HxV) Hz 10 woofer / 1,5 1 driver / 1.4 (Free Field) 115/121dB (Free Field) 3000Hz 45 4 poles in/out connectors 7.4kg 345x505x265mm 55

51 IKOS series 300 mm 580 mm 375 mm 56 IKOS12A IKOS12P 250W RMS bi-amp active acoustic loudspeaker for live and recorded applications Excellent sound quality and high pressure on the whole range of frequencies 12 woofer for reproduction of low-mid range The 1 compression driver is mounted on a horn with 90 x45 dispersion angle MP3 USB/SD-Card-Player integrated Cabinet designed for stage-monitor applications Polypropylene box equipped with two side handles and one in the upper side 35 mm adapter for speaker stands section: 1 microphone (6,3mm Jack + 3p XLR), 1 line (RCA + 3p XLR) Output section: 1 line out (6,3mm Jack + 3p XLR) Independent Bass and Treble controls 5 bands equalizer CLIP, POWER and SIGNAL () indicators for diagnostics through LEDs 250W AES passive acoustic loudspeaker for live and recorded applications Excellent sound and high sound pressure into a compact and lightweight enclosure 12 woofer for reproduction of low range The 1 compression driver is mounted on a horn with 90 x45 dispersion angle Cabinet designed for stage-monitor applications Polypropylene box equipped with two side handles and one in the upper side 35 mm adapter for speaker stands amp (W/RMS) Low High USB/SD-Card-Player Controls USB/SD-Card-Player Connectors /Indicator AC IKOS 12A Active 250W (200W LF + 50Wamp HF) (W/RMS) 90 x45 (HxV) Hz 12 woofer / 2 Low 1 driver / 1.4 High 4dBu (1,23Vrms) adjustable 120/126dB (Free MaxField) 2500Hz MP3, mic, line, master, treble, bass, 5-band master EQ power, setup, play/pause, mode, vol. up, vol. down, previous track, nextuser trackcontrols side IKOS 12P Passive 250W/500W up to 500W RMS/ 90 x45 (HxV) Hz 12 woofer / 2 1 driver / 1.4 (Free Field) 120/126dB (Free Field) 2500Hz USB, SD-Card, Infrared temp./clip power 45 XLR/Jack bal. Pin RCA unbal. VDE in 230 V AC 50Hz AC 12.2kg 380x590x315mm 45 4 poles in/out connectors 9.2kg 380x590x315mm

52 IKOS series 360 mm side 700 mm 445 mm IKOS15A IKOS15P 300W RMS bi-amp active acoustic loudspeaker for live and recorded applications Excellent sound quality and high pressure on the whole range of frequencies 15 woofer for reproduction of low-mid range The 1 compression driver is mounted on a horn with 90 x45 dispersion angle MP3 USB/SD-Card-Player integreted Cabinet designed for stage-monitor applications Polypropylene box equipped with two side handles, one in the upper side and two wheels for the transport integrated Anchor system for suspension via M8 screwsupport 35 mm adapter for speaker stands section: 1 microphone (6,3mm Jack + 3p XLR), 1 line (RCA + 3p XLR) Output section: 1 line out (6,3mm Jack + 3p XLR) Independent Bass and Treble controls 5 bands equalizer CLIP, POWER and SIGNAL () indicators for diagnostics through LEDs 300W AES passive acoustic loudspeaker for live and recorded applications Excellent sound and high sound pressure into a compact and lightweight enclosure 15 woofer for reproduction of low rangedati Tabella The 1 compression driver is mounted on a horn with 90 x45 dispersion angle Cabinet designed for stage-monitor applications Polypropylene box equipped with two side handles, one in the upper side and two wheels for the transport integrated 35 mm adapter for speaker stands IKOS 15A IKOS 15P Active Passive amp (W/RMS) 300W (250W LF + 50W amp HF) (W/RMS) 300W/600W up to 600W RMS/ 90 x45 (HxV) 90 x45 (HxV) Hz Hz Low 15 woofer / 2.5 Low 15 woofer / 2,5 High 1 driver / 1.4 High 1 driver / 1.7 4dBu (1,23Vrms) adjustable (Free Field) 121/127dBMax (Free Field) 121/127dB (Free Field) 2500Hz 2500Hz MP3, mic, line, master, treble, bass, 5-band master EQ power, setup, play/pause, mode, up, vol. Uservol. controls USB/SD-Card-Player Controls down, previous track, next track USB/SD-Card-Player Connectors USB, SD-Card, Infrared /Indicator temp./clip power XLR/Jack bal. Pin RCA unbal. VDE in 4 poles in/out connectors AC 230 V AC 50Hz AC 16kg 13.2kg 445x690x380mm 445x690x380mm 57

53 IKOS series amp (W/RMS) Low High IKOS 8A Active 120W amp (W/RMS) 90 x45 (HxV) Hz 8 woofer / 1,5 Low 1 driver / 1.4 High 4dBu (1,23Vrms) adjustable sensitivity 114/120dB Max (Free Field) 3300Hz IKOS 10A Active 150W amp (W/RMS) 90 x45 (HxV) Hz 10 woofer / 1,5 Low 1 driver / 1.4 High 4dBu (1.23Vrms) adjustable sensitivity 115/121dB Max (Free Field) 3000Hz mic, line,master vol,treble, bass mic, line,master vol,treble, bass USB/SD-Card-Player Controls USB/SD-Card-Player Controls USB/SD-Card-Player Connectors USB/SD-Card-Player Connectors /Indicator /indicator temp./clip /Indicator power temp./clip power XLR/Jack bal. Pin RCA unbal. VDE in XLR/Jack bal. Pin RCA unbal. VDE in AC 230 V AC 50Hz AC 230 V AC 50Hz AC 7.1kg 9.5kg 260x395x210mm 345x505x265mm IKOS 12A Active 250W (200W LF +amp 50W(W/RMS) HF) 90 x45 (HxV) Hz 12 woofer / Low 2 1 driver / 1.4 High 4dBu (1,23Vrms) adjustable sensitivity 120/126dB (Free Field) Max 2500Hz MP3, mic, line, master, treble, bass, 5-band master EQ power, setup, play/pause, mode, vol. up, vol. down, previouscontrols track, USB/SD-Card-Player next track USB, SD-Card, Infrared USB/SD-Card-Player Connectors temp./clip power /Indicator 45 XLR/Jack bal. Pin RCA unbal. VDE in 230 V AC 50Hz AC 12.2kg 380x590x315mm IKOS 15A Active 300W (250W LF + 50W HF) 90 x45 (HxV) Hz 15 woofer / driver / 1.4 4dBu (1,23Vrms) adjustable 121/127dB (Free Field) 2500Hz MP3, mic, line, master, treble, bass, 5-band master EQ power, setup, play/pause, mode, vol. up, vol. down, previous track, next track USB, SD-Card, Infrared temp./clip power 45 XLR/Jack bal. Pin RCA unbal. VDE in 230 V AC 50Hz 16kg 445x690x380mm The curves and data are measured in free field over the entire audio band. Below 200 Hz in terms of half-space the related data suffer increments calculated up to 6dB 58

54 IKOS series amp (W/RMS) Low High AC IKOS 8P Passive amp (W/RMS) 120W/240W up to 240W Recommended RMS/ amp 90 x45 (HxV) Hz 8 woofer / 1,5 Low 1 driver / 1.4 High (Free Field) sensitivity 114/120dB Max (Free Field) 3300Hz 45 4 poles in/out connectors AC 5kg 260x395x210mm IKOS 10P Passive amp (W/RMS) 150W/300W up to 300W Recommended RMS/ amp 90 x45 (HxV) Hz 10 woofer / 1,5 Low 1 driver / 1.4 High (Free Field) sensitivity 115/121dB Max (Free Field) 3000Hz 45 4 poles in/out connectors AC 7.4kg 345x505x265mm IKOS 12P Passive amp (W/RMS) 250W/500W up to 500W Recommended RMS/ amp 90 x45 (HxV) Hz 12 woofer / Low 2 1 driver / 1.4 High (Free Field) sensitivity 120/126dB Max (Free Field) 2500Hz 45 4 poles in/out connectors AC 9.2kg 380x590x315mm IKOS 15P Passive 300W/600W up to 600W RMS/ 90 x45 (HxV) Hz 15 woofer / 2,5 1 driver / 1.7 (Free Field) 121/127dB (Free Field) 2500Hz 45 4 poles in/out connectors 13.2kg 445x690x380mm Optional Accessories SP20 Adjustable speaker pole, 35mm, H cm, 40kg max AS210 Support for 2 speakers, 35mm clutch, min extension 43cm, max 71cm, 40 max load 59

55 ARK series ARK ARK series represents the new speaker solution both in the professional installation sector as an elegant home audio system. The full-range speakers are suitable for small installations in cafes, bistros and fashion stores, or can be used as satellites in combination with the sub. A powerful DSP is installed on the amplified version of the sub. Factory presets or configurable by customer, allow maximum flexibility of use. A sturdy plywood cabinet and a scratch-resistant coating round out the design. Mounting brackets are included.the DAD logo on the grille can be rotated rapidly for both vertically and horizontally installation.

56

57 ARK series 208 mm 310 mm 186 mm side Versions: ARK105MPBK (Black finish) ARK105MPWH (White finish) ARK105MP 2-way passive loudspeaker, 120W AES, 114dB SPL 5 woofer with 1.5 voice, HF Compression driver with 1 throat, titanium diaphragm and 1 voice 140 x140 (HxV ) constant-directivity rotatable waveguide Impedance: 16Ohm lifier: up to 480W RMS/16Ohm Sensitivity: : Hz Xover : 2300Hz Suggest HPF range: 140/180Hz Passive filter with driver protection : 4-pole Speakon in/out Cabinet construction: Symmetrical trapezoidal profile with 7.5 angle 12mm plywood cabinet Quick suspension system with U-bracket (included) - arrangement for articulated bracket (optional). Applications: Reproduction of voice and music for live and recorded performances For sound installations in small to medium-sized environments Mid-high unit in multi-amplified sound systems combined with ARK208 DAD subwoofers For theatre, conference hall and club Stage-monitor Low High connections ARK105MP Passive - 2 way 120W / 240W up to 480W RMS 16Ohm 140 x140 (HxV) Hz 5 woofer / HF driver / 1.5 (Free Field) 108/114dB (Free Field) 2300Hz pole in/out; terminal clamp 5.9kg 186x310x208mm Optional Accessories ARKWMS10: Adjustable bracket on three axes for ARK series speakers, max 10 Kg 62 top

58 ARK series 233 mm 340 mm 201 mm side top Versions: ARK106MPBK (Black finish) ARK106MPWH (White finish) ARK106MP 2-way passive loudspeaker, 120W AES, 116dB SPL 6 woofer with 1.5 voice, HF Compression driver with 1 throat, titanium diaphragm and 1 voice 140 x140 (HxV ) constant-directivity rotatable waveguide Impedance: 16Ohm lifier: up to 480W RMS/16Ohm Sensitivity: : Hz Xover : 2300Hz Suggest HPF range: 120/160Hz Passive filter with driver protection : 4-pole Speakon in/out Cabinet construction: Symmetrical trapezoidal profile with 7.5 angle 12mm plywood cabinet Quick suspension system with U-bracket (included) - arrangement for articulated bracket (optional). Applications: Reproduction of voice and music for live and recorded performances For sound installations in small to medium-sized environments Mid-high unit in multi-amplified sound systems combined with ARK208 DAD subwoofers For theatre, conference hall and club Stage-monitor Techincal Low LHigh connections ARK106MP Passive 2 way 120W / 240W up to 480W RMS 16Ohm 140 x140 (HxV) Hz 6 woofer / HF driver / 1.5 (Free Field) 110/116dB (Free Field) 2500Hz pole in/out; terminal clamp 6.5kg 201x340x233mm Optional Accessories ARKWMS10: Adjustable bracket on three axes for ARK series speakers, max 10 Kg 63

59 ARK series 208 mm 438 mm 186 mm Versions: ARK205MPBK (Black finish) side ARK205MPWH (White finish) ARK205MP 2-way passive loudspeaker, 240W AES, 119dB SPL 2x5 woofer with 1.5 voice, HF Compression driver with 1 throat, titanium diaphragm and 1 voice 140 x140 (HxV ) constant-directivity rotatable waveguide Impedance: 16Ohm lifier: up to 960W RMS/16Ohm Sensitivity: : Hz Xover : 2200Hz Suggest HPF range: 140/180Hz Passive filter with driver protection : 4-pole Speakon in/out Cabinet construction: Symmetrical trapezoidal profile with 7.5 angle 12mm plywood cabinet Quick suspension system with U-bracket (included) - arrangement for articulated bracket (optional). Applications: Reproduction of voice and music for live and recorded performances For sound installations in small to medium-sized environments Mid-high unit in multi-amplified sound systems combined with ARK208 DAD subwoofers For theatre, conference hall and club Stage-monitor Low High connections ARK205MP Passive - 2 way 240W / 480W up to 960W RMS 16Ohm 140 x140 (HxV) Hz 2x5 woofer / HF driver / 1.5 (Free Field) 113/119dB (Free Field) 2200Hz pole in/out; terminal clamp 8.6kg 186x438x208mm Optional Accessories ARKWMS10: Adjustable bracket on three axes for ARK series speakers, max 10 Kg 64 top

60 ARK series 233 mm 498 mm 202 mm Versions: ARK206MPBK (Black finish) side top ARK206MPWH (White finish) ARK206MP 2-way passive loudspeaker, 240W AES, 122dB SPL 2x6 woofer with 1.5 voice, HF Compression driver with 1 throat, titanium diaphragm and 1 voice 140 x140 (HxV ) constant-directivity rotatable waveguide Impedance: 16Ohm lifier: up to 960W RMS/16Ohm Sensitivity: : Hz Xover : 2100Hz Suggest HPF range: 120/160Hz Passive filter with driver protection : 4-pole Speakon in/out Cabinet construction: Symmetrical trapezoidal profile with 7.5 angle 12mm plywood cabinet Quick suspension system with U-bracket (included) - arrangement for articulated bracket (optional). Applications: Reproduction of voice and music for live and recorded performances For sound installations in small to medium-sized environments Mid-high unit in multi-amplified sound systems combined with ARK208 DAD subwoofers For theatre, conference hall and club Stage-monitor Techincal Low LHigh connections ARK206MP Passive 2 way 240W / 480W up to 960W RMS 16Ohm 140 x140 (HxV) Hz 2x6 woofer / HF driver / 1.5 (Free Field) 116/122dB (Free Field) 2100Hz pole in/out; terminal clamp 9.5kg 202x498x233mm Optional Accessories ARKWMS10: Adjustable bracket on three axes for ARK series speakers, max 10 Kg 65

61 ARK series 325 mm side 246 mm 500 mm top top ARK208SA side ARK208SPBK (Black finish) ARK208SPWH (White finish) ARK208SP ARK208SA mm 246 mm Versions: ARK208SABK (Black finish) ARK208SAWH (White finish) 500 mm Bass-reflex active subwoofer, 700W D-class amplifier, 121dB SPLAux OUT for ARK208PStereo amplified OUT (700W/4ohm) for ARK mid-high units 2x8 woofer with 2 voice Electronics: 2x700W indipendent D-class amplifier Integrated programmable DSP Cabinet construction: 15mm multilayer plywood Quick suspension system with U-bracket (included) - arrangement for articulated bracket (optional). : XLR in/out and Speakon 4p connections; AC POWERCON in Applications: Subwoofer for reinforcement of low frequencies in live and recorded performance Subwoofer section of multi-amplified sound systems, combined with DAD Live mid-high loudspeakers Sound reinforcement in permanents installations or mobile sets Subwoofer section of multi-amplified sound systems, combined with ARK midhigh section loudspeakers ARK208SP 2-way passive subwoofer, 300W AES, 122dB SPL 2x8 woofer with 2 voice Impedance: lifier: up to 1200W RMS/ Sensitivity: : Hz Suggest HPF range: 120/200Hz : 4-pole Speakon in/outcabinet construction: Techincal ARK208SA Active - bass reflex amp (W/RMS) RMS fully adjustable DSP AES - / Program Power Recommended amp Hz 2x8 woofer / Low 2 4dBu(1,228Vrms)adjustable Max 115/121dB (Free Field) settable limiter, temp XLR in/out; 2x4 poles out; AC powercon connections type in/out 14.5kg 500x246x325mm Techincal amp (W/RMS) DSP Low Optional Accessories ARK485EU: USB-RS485 interface for ARK DSP parameters management ARKWMS20: Adjustable bracket on three axes for ARK series speakers, max 20 Kg ARK208SP Passive 300W / 600W up to 1200W RMS omnidirectional Hz 2x8 woofer / 2 (Free Field) 116/122dB (Free Field) 4 pole in/out terminal clamp 13.5kg 500x246x325mm

62 ARK series Techincal ARK106MP ARK205MP ARK105MP Techincal ARK206MP Passive 2System way type Passive - 2System way type Passive - 2System way type Passive 2 way AES / Program 120W AES / Program / 240W Power 240W / 480W Power 120W / 240W Power AES / Program 240W / 480W uprecommended to 480W RMS amp uprecommended to 960W RMS amp uprecommended to 480W RMS amp up to 960W RMS 16Ohm 16Ohm 16Ohm 16Ohm 140 x x x x140 (HxV) Hz Hz Hz Hz 6 wooferlow / 1.5 2x5 woofer / 1.5 Low 5 wooferlow / 1.5 Low 2x6 woofer / 1.5 LHigh 1 HF driver High / HF driver / 1.5 High 1 HF driver / 1.5 LHigh 1 HF driver / 1.5 sensitivity (Free sensitivity Field) (Free Field) (Free Field) sensitivity (Free Field) 110/116dB (Free Field) 113/119dB (Free Field) 108/114dB (Free Field) 116/122dB (Free Field) 2500Hz 2200Hz 2300Hz 2100Hz Trapezoidal taper Trapezoidal 7.5 taper Trapezoidal taper 7.5 connections terminal connections clamp 4 pole in/out; terminal clamp 4 pole in/out; terminal clamp connections 4 pole in/out; terminal clamp 4 pole in/out; connections 6.5kg 8.6kg 5.9kg 9.5kg 201x340x233mm 186x438x208mm 186x310x208mm 201x498x233mm Techincal amp (W/RMS) DSP Low Techincal ARK208SA Active - bass reflex amp (W/RMS) RMS fully adjustable DSP Hz 2x8 woofer / Low 2 4dBu(1,228Vrms)adjustable Max 115/121dB (Free Field) settable limiter, temp XLR in/out; 2x4 poles out; AC connections powercon type in/out 14.5kg 500x246x325mm ARK208SP Passive 300W / 600W up to 1200W RMS omnidirectional Hz 2x8 woofer / 2 (Free Field) 116/122dB (Free Field) Optional Accessories BK WH ARKWMS10 Adjustable bracket on three axes for ARK series speakers, max 10 Kg Optional Accessories ARK485UR USB-RS485 interface It allows to manage the audio parameters of active systems from ARK series through USB port of the PC. BK WH ARKWMS20 Adjustable bracket on three axes for ARK series speakers, max 20 Kg 4 pole in/out terminal clamp 13.5kg 500x246x325mm 67

63 AMPLIFIERS and DSP AMPLIFIERS AND DSP In the wide field of professional audio amplifying and control devices have an essential role to enhance and maximize features of PA systems. For this reason power amplifiers are requested specifications and features with highest correspondence to requirements of applications they are The whole of these requirements from live music to permanent installation has a mixed and heterogeneous amplitude, ranging from high power values eithin limited weighing to possibility of control up to the highest levels of precision in a remotely controlled environment. DAD range of amplifying and control device offers a wide set of valuable solutions for professional audio, employing latest technologies and most reliable design and manufacturing techniques.

64

65 Amplifiers and DSP FZ10004 The FZ amplifiers series uses the technology of amplification in Class I with SMPS power stage. The operation in Class I is based on a continuous and automatic adjustment of the value of the supply voltage of the final stage. This optimizes the efficiency up to 85%, reducing the weight and heat dissipation comparing with other amplifiers which deliver same output. The models of FZ serie are able to operate with loads from 2Ohm and are equipped with an extensive set of protection circuits to satisfy the higher reliability parameters with high quality profile for fixed and mobile sonorizations. FZ10004 is a 4ch amplifier capable to deliver and in 2U rack mount only. These features make it ideal for professional full-range speakers and in multi-amplified system characterized by wide dynamics and high performance. Hot attack and detach system 70 8 Ohm stereo power (all ch.s driven) 4 Ohm stereo power (all ch.s driven) 2 Ohm stereo power (all ch.s driven) 4 Ohm bridge power (per ch.) Performance with Gain THD at 1 khz and 1dB below clipping Slew rate Output impedance at 100 Hz S/N rate gain Power voltage / Net weight FZ Wx4 2100Wx4 2500Wx4 5000Wx2 35dB and VL:150 V 6.8Hz-34Khz@ 8 Ohm -3 db <0.05% >20V/us 56mOhm >112dB db 20kOhm Voltage Limiter, (VL) Over-heat, VHF, VLF Shortcircuit, DC, Power Limiter (PL) 230V /50Hz 482x88x430 mm Kg Amplifier module 2500W

66 Amplifiers and DSP TDX Series TDX3600 First model of TDX series, with 2x1850W 2Ohm and 2x1350W 4ohm, in 2 rack units. These specifications make TDX3600 suitable for professional full-range loudspeakers and MF/HF sections of multi-amplified systems requiring wide dynamics and advanced performance. TDX7000 TDX7000 features an output of 2x3300W@2Ohm and 2x2400W@4Ohm into 2 rack units. These features make TDX7000 the right choice for professional full-range speakers and Sub/MF/HF sections in highly demanding sound installations. TDX9000 TDX9000 is the most powerful model of the TDX series, featuring an output of 2x4500W@2Ohm and 2x3000W@4Ohm into 3 rack units. These features make TDX9000 the right choice for professional PA systems and Sub/MF/HF sections in highly demanding sound installations. up to 85%, reducing the weight with The TDX amplifier series employs the same power and heat dissipation. amplification technology in Class I and The models of the TDX series are able power stage with toroidal transformer. to operate with loads from 2Ohm and are equipped with an extensive The operation in Class I is based on a set of protection circuits to satisfy continuous and automatic adjustment the higher reliability parameters with of the value of the supply voltage of the fixed and mobile high quality profile final stage. This optimizes the efficiency sonorizations. 8 Ohm stereo power (EIA/THD1%) 4 Ohm stereo power (EIA/THD1%) 2 Ohm stereo power (Pulse/THD1%) 4 Ohm bridge power (Pulse/THD1%) THD N Slew rate Damping factor S/N rate /gain Voltage gain/8 Ohm (balance/ unbalance) Output circuit class Cooling air-flow Power voltage / Rack Units TDX3600 TDX7000 TDX Wx2 1350Wx2 1850Wx2 3600W 1450Wx2 2400Wx2 3300Wx2 7200W 20Hz-20Khz@ 8 Ohm -0.5 db <0.05% >10V/us >300 >100dB 1Vrms/38dB/32dB 43dB 1800Wx2 3000Wx2 4500Wx2 9000W <0.05% >300 >100dB 40,5dB <0.1% >100 >90dB 43,8dB Balance 20K / Unbalance 10K I class Clip/limiter, Over-heat, VHF, VLF Short-circuit, DC, Automatic fade in, progressive volume Airflow from panel to panel. ~220V 10%/50Hz 483x89x451 mm 483x89x451 mm 483x133x493 mm Kg Kg 32Kg 71

67 Amplifiers and DSP DP1000 DP-DSP Series Reaching an output of employs SMPS technology for power-supply stage and D-class for output stage, weighing 5.7kg only. The innovative DAD s D-class DP and DSP amplifiers series uses an advanced design that drastically reduces weight and dissipated heat. The efficiency between power consumption and output available power is 95%. As the name says, DSP series includes a Texas Instruments 32/64 bit floating-point and 96Khz sampling rate digital signal processor. DSP is designed to be incredibly effective, but extremely easy to use. The parameters can be regulated and visualized from the al panel on the amplifier or through its intuitive user interface software on a PC. DP2000 Reaching an output power of SX2000 employs SMPS technology for power-supply stage and D-class for output stage, weighing 6.8kg only. DP4000 Reaching an output power of SX2000 employs SMPS technology for power-supply stage and D-class for output stage, weighing 6.8kg only. DP4004 Reaching an output power of SX2000 employs SMPS technology for power-supply stage and D-class for output stage, weighing 6.8kg only Ohm stereo power (EIA/THD1%) 4 Ohm stereo power (Pulse) THD1%) 8 Ohm bridge power (Pulse THD1%) THD+N Damping factor S/N rate /gain (balance/unbalance) Output circuit class Cooling air-flow Power voltage / Net weight DP1000 DP and DSP series amplifiers are designed with an new high audio resolution D-class typology. This revolutionary amplifier series provides a superior quality sound and an unequaled reliability. circuits allow higher efficiency under difficult loads and power conditions. In other words, an amplifier that doesn t hurt nor your budget nor your back! DP2000 DP4000 DP Wx2 650Wx2 1000Wx2 650Wx4 550Wx2 1050Wx2 1750Wx2 1100Wx4 1100W 2100W 3500W 2000WX2 20Hz-20Khz@ 8 Ohm -0.5 db 20Hz-20Khz@ 8 Ohm -1dB <0.1% <0.15% <0.1% >60 >500 >96dB >100dB 1Vrms/32dB/38dB Balance 20K / Unbalance 10K D class Soft-start, short circuit, overload, DC, overheat, clip/limit, progressive volume Airflow from panel to panel. 90V-260V/50Hz-PFC universal mains ~230V 10%/50Hz regulated 483x89x382mm 483x89x305mm 483x89x435mm 5.7Kg 6.6Kg 7.3Kg 9.5Kg

68 Amplifiers and DSP DSP1000 Reaching an output of employs SMPS technology for power supply stage e D-class for output stage, weighing 6kg only. Equipped with a 32/64 bit floating-point and 96kHz sampling rate DSP. Specifics preset for DAD loudspeakers available in the download section. These features make DSP1000 the right choice for professional loudspeakers and for Sub/ MF/HF sections of multi-amplified systems. DSP1500 Reaching an output power of employs SMPS technology for supply stage and D-class for output stage, weighing 6,3kg only. Equipped with a 32/64 bit floating-point and 96kHz sampling rate DSP. These features make DSP1500 the right choice for a large variety of professional loudspeaker and for Sub/MF/HF sections of multiamplified systems. DSP2000 Reaching an output power of employs SMPS technology for power-supply stage and D-class for output stage, weighing 96,8kg only. Equipped with a 32/64 bit floating-point and 96kHz sampling rate DSP. These features make DSP2000 the right choice for professional loudspeakers and for Sub/MF/HF sections of multi-amplified systems. User Interface DSP Series 8 Ohm stereo power (EIA/THD1%) 4 Ohm stereo power (Pulse) THD1%) 8 Ohm bridge power (Pulse THD1%) THD+N Damping factor S/N rate /gain (balance/unbalance) Output circuit class DSP2000 DSP1500 DSP1000 Cooling air-flow Power voltage / Net weight Gross weight 500Wx2 350Wx2 800Wx2 550Wx2 1600W 1100W 20Hz-20Khz@ 8 Ohm -0.5 db <0.1% >60 >96dB 0.775Vrms/1Vrms/1.4Vrms Balance 20K / Unbalance 10K D class Soft-start, short circuit, overload, DC, overheat, clip/limit, progressive volume Airflow from panel to panel. ~230V 10%/50Hz 483x89x382mm 6.8Kg 6.3Kg 6 Kg 8Kg 7.5Kg 7.2Kg DSP specification filtering 8- band Eq type EQ gain /Eq freq. band Full parametric eq filter Q Maximum delay Limiter threshhold Limiter release time Bessel. Butt. Link.-Riley (12,18,24.48dB/Oct.) Full paramtric, high shelf-low shelf (6-12dB/Oct.) Adjustable from -20dB to +20dB 20Hz to 20kHz, 1/36Oct.step pitch (19980 position) Adjustable from to S Adjustable from +20dBu to -20dBu,0,1dBu steps Adjustable to 2/4/6/8/16/32 x the attack time 650Wx2 1050Wx2 2100W 73

69 Amplifiers and DSP FZ Ohm stereo power (all ch.s driven) 1300Wx4 4 Ohm stereo power (all ch.s driven) 2100Wx4 2 Ohm stereo power (all ch.s driven) 2500Wx4 4 Ohm bridge power (per ch.) 5000Wx2 Performance with Gain 35dB and VL:150 V 6.8Hz-34Khz@ 8 Ohm -3 db THD at 1 khz and 1dB below clipping <0.05% Slew rate >20V/us Output impedance at 100 Hz 56mOhm S/N rate >112dB gain db 20kOhm Voltage Limiter, (VL) Over-heat, VHF, VLF Short-circuit, DC, Power Limiter (PL) Power voltage / 230V /50Hz 482x88x430 mm Net weight Kg Gross weight Kg 8 Ohm stereo power (EIA/THD1%) 4 Ohm stereo power (EIA/THD1%) 2 Ohm stereo power (Pulse/THD1%) 4 Ohm bridge power (Pulse/THD1%) THD N Slew rate Damping factor S/N rate /gain Voltage gain/8 Ohm (balance/unbalance) Output circuit class Cooling air-flow Power voltage / Rack Units 74 TDX Wx2 1350Wx2 1850Wx2 3600W TDX7000 TDX Wx2 1800Wx2 2400Wx2 3000Wx2 3300Wx2 4500Wx2 7200W 9000W 20Hz-20Khz@ 8 Ohm -0.5 db <0.05% <0.05% <0.1% >10V/us >300 >300 >100 >100dB >100dB >90dB 1Vrms/38dB/32dB 40,5dB 43dB 43,8dB Balance 20K / Unbalance 10K I class Clip/limiter, Over-heat, VHF, VLF Short-circuit, DC, Automatic fade in, progressive volume Airflow from panel to panel. ~220V 10%/50Hz 483x89x451 mm 483x89x451 mm 483x133x493 mm Kg Kg 32Kg DP1000 DP2000 DP4000 DP Ohm stereo power (EIA/THD1%) 350Wx2 650Wx2 1000Wx2 650Wx4 4 Ohm stereo power (Pulse) THD1%) 550Wx2 1050Wx2 1750Wx2 1100Wx4 8 Ohm bridge power (Pulse THD1%) 1100W 2100W 3500W 2000WX2 20Hz-20Khz@ 8 Ohm -0.5 db 20Hz-20Khz@ 8 Ohm -1dB THD+N <0.1% <0.15% <0.1% Damping factor >60 >500 S/N rate >96dB >100dB /gain 1Vrms/32dB/38dB (balance/ Balance 20K / Unbalance 10K unbalance) Output circuit class D class Soft-start, short circuit, overload, DC, overheat, clip/limit, progressive volume Cooling air-flow Airflow from panel to panel. 90V-260V/50Hz-PFC universal mains Power voltage / ~230V 10%/50Hz regulated 483x89x382mm 483x89x305mm 483x89x435mm Net weight 5.7Kg 6.6Kg 7.3Kg 9.5Kg Gross weight 6.9Kg 7.8Kg 8.6Kg 11.3Kg 8 Ohm stereo power (EIA/THD1%) 4 Ohm stereo power (Pulse) THD1%) 8 Ohm bridge power (Pulse THD1%) THD+N Damping factor S/N rate /gain (balance/unbalance) Output circuit class Cooling air-flow Power voltage / Net weight Gross weight DSP specification filtering 8- band Eq type EQ gain /Eq freq. band Full parametric eq filter Q Maximum delay Limiter threshhold Limiter release time Attack time DSP1000 DSP1500 DSP Wx2 550Wx2 1100W 500Wx2 650Wx2 800Wx2 1050Wx2 1600W 2100W 20Hz-20Khz@ 8 Ohm -0.5 db <0.1% >60 >96dB 0.775Vrms/1Vrms/1.4Vrms Balance 20K / Unbalance 10K D class Soft-start, short circuit, overload, DC, overheat, clip/limit, progr. volume Airflow from panel to panel. ~230V 10%/50Hz 483x89x382mm 6 Kg 6.3Kg 6.8Kg 7.2Kg 7.5Kg 8Kg Bessel. Butt. Link.-Riley (12,18,24.48dB/Oct.) Full paramtric, high shelf-low shelf (6-12dB/Oct.) Adjustable from -20dB to +20dB 20Hz to 20kHz, 1/36Oct.step pitch (19980 position) Adjustable from to S Adjustable from +20dBu to -20dBu,0,1dBu steps Adjustable to 2/4/6/8/16/32 x the attack time Adjustable from 0.3 to 100 ms

70 Amplifiers and DSP DPX2060 DAD DPX2060 is a digital processor designed to control PA systems in touring applications or in fixed installations, featuring 2 and 6 Output channels, 32-bit (40-bit extended) floating point processor and high-performance 24-bit analog converters. High resolution DSP (Digital Signal Processor) prevents noise and distortion due to truncation errors typical of ordinary 24-bit fixed-point devices. DPX2060 has a wide range of controls, including In/Out levels, delay, polarity, 6 bands of parametric equalizer per channel, selection through more crossover slopes, advanced limiter adjustment (attack/release time triggering). 1Hz resolution allows more accurate control over. and Output channels can be routed in multiple configurations, allowing stereo, mono or distribution mixer modes. DPX2060 can be setup and programmed in realtime through the panel or the Windowscompatible software accessed via USB interface. Ethernet interface (optional) allows connection and control of more units in larger installations, supported by the software controlling up to 16 units. New software and firmware upgrades can be downloaded into DPX2060 to keep it updated with new algorithms and functions. DPX2060 has several options allowing advanced protection and locking of settings and programs. Internal memory saves up to 30 presets which can then be recalled and stored from/to computer hard-drive. Product Type Outputs Max Level Response Distortion Resolution Sampling rate A/D - D/A Converters Gain OUT Delay Filters DPX2060NB DPX2060NB interface enables access via a PC for remote control and monitoring of the DPX2060 devices on the BvNet protocol network. It provides two connectivity options RS232 serial port or USB. Self-powered via the USB port. Can drive up to 1km of network cable. High quality Neutrik Ethercon connectors, also compatible with standard RJ45 cables. USB 1.1 compatible or 2.0 on a type B connector. Electric consumption 150mA. RS232C serial communication on a female D-pin connector. Power consumption: 750mW/USB, 3W/external power supply. Filters Slope EQ EQ gain EQ width Limiter Audio Connectors Power supply DPX2060 Digital Audio Processor 3 way stereo, 6 way mono +20dBu 10Hz to 40kHz, +/-3dB (filters disabled) 20Hz to 20kHz, +/-0.5dB (filters disabled) <0.01%, (+10dBu, 20Hz to 20kHz, 30kHz bandwidth 24-bit 96 khz 24-bit +20dB to -80dB and mute, 0.2dB steps 400ms, output 80ms Bessel, Butterworth, Linkwitz-Riley, Hardman 12, 18 & 24dB/octave Bessel and Butterworth 12, 24 and 48dB/octave Linkwitz Riley 4th or 8th order Hardman 10Hz to 25kHz, 1/36 octave steps +15dB to -15dB, 0.2dB steps 5.0 to 0.1 octaves bandwidth, 1/36 octave steps High performance limiter, adjustable threshold in 0.2dB stepsautomatic time costants 3-pin XLR Universal switch-mode PSU, 90V to 264V AC, 47/63Hz 2,7 Kg 482x44x254mm 75

71 Amplifiers and DSP DXZ Series The DXZ series of products combines an With an intuitive user interface and real-time monitoring on Mac or PC via intuitive user interface with professional a built-in USB interface, the DXZ series audio processing standards in a costrugged analogue input stage accepts effective set of products, making them voltages of up to 10V RMS (+23dBu), ideal for rental companies and a range of matching any source on the market today. installation applications. The outputs can drive up to +12dBu, (2V All DXZ products feature 96kHz sample RMS), which is enough to drive even the rate, a dynamic range of 110dB(A) at the most demanding power amplifier. inputs, 114dB (A) at the outputs and a The DXZ88 Matrix Zone Controll maximum input level of +23dBu. The DXZ26 and DXZ48 Audio Managment Providing the same DSP functionality as the DXZseries, the DXZ88 is an eight System - Matrix Processor input, eight output matrix mixer with full A powerful two/four input, six (DXZ26) processing on each channel, a high pass or eight (DXZ48) output unit with 10 filter, limiter and 10 band Parametric EQ parametric EQ bands per output and a per input and output. range up to 40kHz. DXZ26 Audio Management System 2 input 6 output DXZ48 Matrix Processor 4 input 8 output DXZ88 Matrix Zone Controll 8 input 8 output 76 DXZ26 DXZ48 DXZ88 Product Type Audio Management System Matrix Processor Matrix Zone Controll 2 way mono 4 way mono 8 way mono Outputs 3 way stereo, 6 way mono 4 way stereo, 8 way mono Max Level +23dBu Response 10Hz to 40kHz, +/-3dB (filters disabled) Distortion <0.01%, (+10dBu, 20Hz to 20kHz, 30kHz bandwidth DSP 64-bit Sampling rate 96 khz A/D - D/A Converters 24-bit Gain OUT +12dB to -48dB and mute, 0.25dB steps Delay output 2000ms Filters Bessel, Butterworth, Linkwitz-Riley, All-Pass Filters Slope 12, 18 & 24dB/octave Bessel and Butterworth 12 & 24dB/octave Linkwitz Riley EQ 10Hz to 25kHz, 1/36 octave steps EQ gain +12dB to -12dB, 0.25dB steps EQ width Q 25 to BW 4.75 to 0.06 High performance limiter, adjustable threshold in 0.25dB steps. Automatic attack time, Limiter Release Audio Connectors 3-pin XLR Power supply 220V AC, 50Hz 1,7 Kg 482x44x175mm