WOOFER PRODUCTS PROFESSIONAL SERIES SERIES HI-Q 10 HI-Q 12 HI-Q 15 PRO 12 SERIES RAP 12

Transcription

1

2 WOOFER PRODUCTS SERIES This unique woofer is designed to provide maximum bass while utilizing very minimal space. All American made with domestic parts, this woofer s superior sound qualities are contributed to precision, craftsmanship, a heavy 2.5" copper round clad aluminum (CCAW) Voice Coil wound on a black anodized (BAA) aluminum former for decreased weight and increased power handling.. Rest assured, the Hi-Q Series is designed for the most output for a given amount of input. ** More for Less ** Whether your desire is a smooth responsive bass or high SPL, the Hi-Q Durability is unsurpassed. HI-Q 10 HI-Q 12 HI-Q 15 They say big things come in small packages, this is certainly true with the new HiQ lbs of American Made Bass Muscle, its safe to say this sub-woofer will decimate all utilizing minimal air space. Bass Brutality at its finest the HiQ 12 has been designed and built to take on all extreme sub-frequency applications. Superior frequency response and quality were critical when designing the 23.35lb HiQ 12. Based on its history its safe to say that the next generation HiQ 15 is something special. Capable of providing ground shaking bass in smaller sealed or vented, isobaric, and in bandpass designs, The HiQ will satisfy your bass buds. PROFESSIONAL SERIES Savard s Pro Woofers can provide a smooth, clean, or extremely deep high SPL bass response. By using 3 voice coils and Kapton bobbins, the Pro driver can sustain maximum power. Kapton is a NASA designed material used to absorb and dissipate heat. The durable, non-corrosive and heat resistant aspects of the Professional voice coil will give the listener clean, responsive bass throughout the woofers long life span. A serrated puissant surround provides long-lasting acoustical suspension. PRO 12 No other 12 Bass Driver performs like the Pro 12 when it comes to loud and clear bass reproduction. This speaker can handle up to 2000 watts of CLEAN watts RMS and can put out an amazing 95 db of sound, with a frequency response of hz. It carries a truly powerful heavy magnetic motor with pole vent and a 3 Kapton double-wound voice coil. Professional 18, 15, 10, 8 Available Soon SERIES The Rap Series woofer has been designed to accent any enclosure design. This woofer has proven success in sealed, vented, and bandpass designs. Efficient voice coils, lightweight cones and a Rubatex surround are the characteristics that will provide maximum output with only minimal input power. The Rap Series woofer has set many SPL records throughout the auto sound industry. RAP 12 The Rap 12 is the kind of 12 woofer that audiophiles look for, because it delivers both extreme durability and sound quality. It can take up to 650 clean watts RMS, and turn it into as much as 90.5 db of sound at 1w/1m. It also carries a heavy 3 Kapton double wound voice coil. The Rap 12 is what loudspeaker performance is all about. Rap 10 and 15 - Available Soon

3 SEPARATES T-1 TITANIUM TWEETER This ferro-fluid cooled tweeter is highly efficient. A titanium dome is used for added durability and an contemporary design. Designed with the Fletcher Munson in mind. This Pro Style Tweeter is Engineered to excel in areas of the frequency spectrum where the human ear naturally lacks in the ability to hear. Uses such as and vehicle staging, or to expand and complement any home theater/outdoor system the T-1 can produce frequencies from 2KHz-20KHz. The T-1 tweeter is truly a work of art PROFESSIONAL COMPRESSION DRIVER Like its predecessors the SAVARD Compression drivers are designed to excel in efficiency offering clean and precise reproduction of upper midrange to lower high frequency ranges. The NEW Line of Professional Series Compression Drivers by SAVARD are designed to have increased lower frequency extension for seamless transition/crossover between mid-bass to midrange. The impressive lower end reach of 850hz greatly out performs the old SAVARD compression driver intended to have a limit of only 2000KHz! The NEW SAVARD Compression driver is designed to handle the most demanding of applications of Professional Audio!

4 RECOMMENDED ENCLOSURES The following table contains what we here at Savard have determined to be the optimum enclosure design for each of our woofers. Optimum to us means a cabinet that can be easily constructed, uses minimum resources (both cash and time) and will produce a good all around bass response. Due to the extreme versatility of Savard Speakers, this chart should not be considered The Bible of enclosure designs. It is only a good starting place to design your enclosure. IF you want an enclosure to produce an extremely low response, extremely High SPL (on a meter), isobaric, band-pass or any other enclosure design, your dealer will be able to provide additional information or audiosupport@savardgroup.net. DO NOT use enclosure design recommendations from other manufacturers. DO NOT let your sister-in-laws best friends brothers uncle convince you he can design a better enclosure (unless of course he is a Savard dealer). Our designs are time tested and will work for you. Note that some designs are ported and some are sealed. Please follow these designs closely for your particular speaker. If you have already designed and/or built your cabinet, just pick out the driver that will work best for your enclosure (some slight modifications may be necessary). If you run into problems please see your dealer for help as they are trained to use SAVARD Speakers to their fullest potential. Model/Size Enclosure Volume (CuFT) /Ported Port Area Port Length Comments Hi-Q 10".65 (+/- 20%) Miniature Cabinet/Clean Response Hi-Q 10" 1.3 Ported in sq inch Increased Bass Hi-Q 12" 1.4 (+/- 20%) Popular Size w/clean response Hi-Q 12" 2 Ported 22 in sq 18.37" inch Increased Bass Hi-Q 15" 1.9 (+/- 20%) Popular Size w/clean response Hi-Q 15" 2.75 Ported in sq 18.93" inch Increased Bass (+6db@ 40hz) RAP 12" 1.75 (+/- 20%) Popular Size w/clean response RAP 12" 2.3 Ported 25.3 in sq 17" inch Increased Bass (+8db@ 40hz) PRO 12" 1.75 PRO 12" 2.75 Ported in sq 14.63" inch HiQ Series Rap Series Professional Series Strong Hard Punch Bass and Durability Where Space Available

5 WOOFER PARAMETERS SAVARD has established a reference for Thiele-Small Parameters that offer a more realistic picture of how a speaker will perform in the enclosure you design. We call it RTP Standards. We have found that most parameters supplied by manufacturers are of the speaker BEFORE break-in. This poses a problem. Parameters change with temperature, as well as after break in. SAVARD Parameters are taken by state of the art test equipment in a stable environment of 75 & 80 degrees and anticipate a minimum 4 hour break in, so that the picture you see when using a computer design program will be a more accurate portrayal of what you will actually hear. SAVARD specs are much more conservative than those of other manufacturers. We have seen as much as a 70% decrease in projected SPL, but we believe that it is our responsibility to provide you with real-time parameters, as you will experience in daily use.

6

7

8