UPGRADE. Your Audio System. plug & play ENGLISH VERSION

Transcription

1 UPGRADE Your Audio System ENGLISH VERSION plug & play 1

2 Table of contents MUSIC A new experience Amplifiers PP 41DSP... 4 PP 1SUB... 6 PP 52DSP... 8 PP 82DSP Enclosure subwoofers PP 7E-D PP 7S-D PP 8E-Q PP 10E-D Subwoofer chassis: PP 72W-D PP 8W-Q Plug & play The concept - upgrade your audio system The accessories

3 Philosophy Music is pure emotion and should be a feast for the senses. Most of the OE sound systems, however, seem hardly capable of arousing emotions, much less setting off waves of audiophile enthusiasm. The most beautiful music means nothing without that spark of excitement! But now there's an ideal solution for turning the dream of audio excellence into reality. With its intelligent plug & play components, Audiotec Fischer is trailblazing totally new paths to get the most in sound excellence out of original audio systems at a minimum of installation effort. In doing so, our overriding credo is: Your car should stay the way it is. Not one single cable has to be cut or modified to install our MATCH sound systems. This is pure enjoyment with no regrets combined with a sound experience in a new dimension. Let yourself be seduced by us! Here are the advantages at a glance: No need to replace the OE radio or OE speakers No changes to the vehicle electrical system No intervention in existing CAN/MOST bus systems All wiring is pre-assembled for genuine "plug & play" Short installation times (generally < 1 hour) No restrictions in the everyday use of the vehicle Easy de-installation without leaving a trace 3

4 PP 41DSP Simple, simpler, PP 41DSP - a sound upgrade of original sound systems has never been easier. The PP 41DSP is specified by vehicle manufacturer, comes already completely configured, and in most editions is offered with the matching vehicle-specific connection cable. The internal memory contains up to 16 different setups for the digital signal processor in the amplifier. Simply adjust the number to the right setup for your own vehicle using two buttons, and your original speakers will be vaulting to new audio peaks in no time. Perhaps no need to say that the included cable set enables a connection that require not even a single modification to the vehicle wiring harness. That is plug & play in its purest form. compact Pure and simple RMS / max. power: PP 41DSP - at 4 ohms 4 x 35 / 70 watts - at 2 ohms: 4 x 50 / 100 watts Frequency range: 20 Hz - 22,000 Hz Number of inputs: 4 x Highlevel DSP resolution: 56 bits DSP processing power 50 MIPS Total harmonic distortion (THD): < 0.03 % Signal-to-noise ratio: > 100 db Damping factor: > 100 Input impedance: 30 ohms Dimensions (H x W x D): 44 x 185 x 124 mm 4

5 Amplifiers PP 41DSP is a perfect example of how easy it can be to embrace state-of-theart technology. Foolproof connections and only two buttons for the right configuration in a matter of seconds that's all there is to it. What's more, the compact design enables effortless installation - you'll be enjoying this audio boost all the more quickly. It's all here Up to 16 different sound setups are already pre-programmed and can be called up using the two buttons. The display on the top side indicates the selected memory slot. Need more bass? The PP 41DSP is configured to enable a rich bass sound with your original speakers. For even more bass, we recommend the PP 1SUB subwoofer amplifier. This is connected using only a single cable and drives any type of MATCH subwoofer. Uncompromisingly stable The PP 41DSP is totally oblivious to fluctuations in battery voltage. Its highly efficient MCM power supply technology keeps the internal supply voltage of the output stage 100% stable even when starting the engine. This "start/stop capability" is one of the many unique features of all MATCH amplifiers. Finest sound engineering A digital signal processor with 56 bit resolution and high-end converters by the manufacturer Asahi Kasei, a company renowned for its studio equipment, provide for superb sound characteristics. Features PP 41DSP: - Effortless plug & play connection to the original sound systems using vehicle-specific adapter cables - Up to 16 different DSP setups that are pre-programmed can be called up at the touch of a button - Indication of the selected setup via a 7-segment display - Low-level sub out for a separate PP 1SUB subwoofer amplifier - 56 bit DSP technology and 24 bit AD/DA converter - Start/stop capability, all the way down to 6V supply voltage - MCM power supply technology with "ECO mode" - Connection for optional cable remote control - State-of-the-art SMD technology for a smaller footprint and maximum reliability - Printed circuit boards in fourfold multilayer technology for optimal power and signal transmission 5

6 PP 1SUB Sometimes, only more is enough PP 1SUB is an ideal complement to the PP 41DSP, when you like to feel the bass. This extremely compact subwoofer amplifier drives our MATCH subwoofers to acoustic peaks of performance. The proper setting of key parameters such as crossover frequency, level and phase can be really tricky; good thing you don't have to worry about this at all. We've already handled it for you and provided for vehicle-specific pre-programming in the PP 41DSP setups. This demonstrates that the PP 1SUB thus not only benefits from the sophisticated DSP technology of the PP 41DSP, it also is combined exclusively with it and was not designed as a stand-alone amplifier. MORE Sounds deep RMS / max. power: PP 1SUB - at 2 ohms: 1 x 160 / 320 watts (4 channels 40 / 80 watts each) Total harmonic distortion (THD): < 0.03 % Signal-to-noise ratio: > 100 db Damping factor: > 100 Input impedance: Dimensions (H x W x D): 30 ohms 44 x 185 x 64 mm 6

7 Amplifiers For all its robust power of 160 watts, the PP 1SUB is extraordinarily compact, which means it fits easily anywhere inside the car. Depending upon space available, it can even be installed next to the PP 41DSP or near the respective MATCH subwoofer. Because the connection cables (1 m length and included in the delivery of the PP 1SUB, 4.8 m length and included in delivery with the MATCH enclosed subwoofers) are bidirectional and interchangeable for effortless installation. The connection becomes child's play The PP 1SUB receives all its signals, including supply voltage, through the PP 41DSP MATCH amplifier. One single pre-assembled cable (included in delivery) provides the necessary connection. Even the MATCH subwoofers are connected to the PP 1SUB with a single cable (included in the delivery of the subwoofers). Always impeccably configured Nothing could be simpler - the PP 1SUB receives its input signal via the PP 41DSP. All pre-adjustments for optimal adaptation to the other speakers in the vehicle are already included in each vehicle specific setup. The subwoofer level can be adapted to your personal tastes via the included cable remote control. The suitable MATCH subwoofer The PP 1SUB is exclusively designed to be combined with subwoofers of the MATCH series (see label on the PP 41DSP packaging). It is not suitable with subwoofers of other manufacturers. There are the following MATCH subwoofers to choose from: PP 7E-D, PP 7S-D, PP 8E-Q and PP 10E-D. Features of the PP 1SUB: - The ideal complement to the MATCH PP 41DSP amplifier - Effortless plug & play connection using a total of just two cables - Optimally pre-configured through the PP 41DSP sound setup - Easily combined with the MATCH subwoofers PP 7E-D, PP 7S-D, PP 8E-Q and PP 10E-D - Cable remote control for the subwoofer levels is included in delivery 7

8 PP 52DSP The best of both worlds the new PP 52DSP strikes a perfect balance between simple installation and maximum versatility. Those who like things quick and simple can load an appropriate vehicle-specific setup per MicroSD card into the amplifier and let the fun begin. Audiophiles who create their own sound setup will enjoy the integrated USB interface for direct connection to a PC and the sensational options for trying their hand at sound engineering. Thanks to the two-channel, freelyconfigurable preamplifier output, there is even an option of combining the system with additional amplifiers. Plug & play doesn't get any more versatile than this. UNIVERSAL Master of all trades RMS / max. power: PP 52DSP - at 4 ohms 4 x 35 / 70 watts - at 2 ohms: 4 x 50 / 100 watts - Match Subwoofer at 2 ohms: 1 x 160 / 320 watts Frequency range: 10 Hz - 22,000 Hz Number of inputs: 4 x Highlevel, 1x Aux DSP resolution: 56 bits DSP processing power 172 MIPS Total harmonic distortion (THD): < 0.01 % Signal-to-noise ratio: > 103 db Damping factor: > 100 Input impedance: 30 ohms Dimensions (H x W x D): 44 x 185 x 154 mm 8

9 Amplifiers "The Beauty is a Beast" through targeted fine-tuning of all electronic devices, the PP 52DSP offers a rich and balanced sound reproduction, which is accented especially in combination with the MATCH subwoofers. Incredible bass power is guaranteed here. USB on board Those who want to create their own sound setup can connect the PP 52DSP directly to a PC and get started. The software required to do so is available free on our website Open for system enhancements In addition to the five internal amplifier channels, the PP 52DSP offers the option of establishing a connection to additional amplifiers through the 2-channel preamplifier output. This output is totally freely configurable using the DSP PC Tool. Its maximum output voltage of 3V is even completely galvanically isolated, in order to eliminate any interference noise caused by ground loops. Everything under control The optional cable remote control also provides a novel feature both controllers and the selector switch are freely assignable using software. You can decide whether you want to use it for controlling the overall volume, subwoofer level or Aux input. Various functions can also be assigned to the switch. Seven in one fell swoop The DSP PC-Tool software enables each of the seven channels to be freely configured. You have direct access to highpass, lowpass and bandpass filters, along with numerous EQ bands. Get ready for your perfect sound experience. Features PP 52DSP: - Effortless plug & play connection to the original sound systems using vehicle-specific adapter cables - Upload of vehicle-specific setups via a MicroSD memory card - Extremely high performance DSP with virtually boundless sound engineering opportunities; freely configurable using PC software - 56 bit DSP technology and 24 bit AD/DA converter from Burr-Brown - USB interface for direct connection to a PC - Freely configurable to two-channel pre-out for the connection of additional amplifiers - Aux input with automatic or manual changeover - Start/stop capability, all the way down to 6V supply voltage - MCM power supply technology with "ECO mode" - Connection for optional cable remote control, functionality configurable using PC software - State-of-the-art SMD technology for a smaller footprint and maximum reliability - Printed circuit boards in fourfold multilayer technology for optimal power and signal transmission 9

10 PP 82DSP The crowning achievement of this plug & play amplifier series the new PP 82DSP, with its incredible performance on a small footprint outshines all the previous models that came before it. With its enormous range of functions, thanks to Audiotec Fischer's unique Class HD technology, it is setting a whole new standard in terms of efficiency. The combination of state-of-the-art digital amplifier technology and a dynamically-controlled switched-mode power supply reduces heat generation and power consumption to an absolute minimum. But that's not all no less than eight separate and freely-configurable amplifier channels with incredible power enable even sophisticated system configurations with one single amplifier. performance The powerhouse RMS / max. power: PP 82DSP - at 4 ohms 8 x 55 / 110 watts - at 2 ohms: 8 x 70 / 140 watts Frequency range: 10 Hz - 22,000 Hz Number of inputs: 4 x Highlevel, 1x Aux, 1x optical DSP resolution: 56 bits DSP processing power 172 MIPS Total harmonic distortion (THD): < 0.02 % Signal-to-noise ratio: > 100 db Damping factor: > 100 Input impedance: 30 ohms Dimensions (H x W x D): 44 x 185 x 164 mm 10

11 Amplifiers Fireworks of cutting-edge technologies for sound enjoyment at the highest level never before has so much ingenuity been put into offering half a kilowatt of power on such a small footprint. With all the focus on the technical features, it's easy to forget that the PP 82DSP with its phenomenal design is also enticing to look at and to touch. The secret of maximum efficiency The totally new P³S power pack of the PP 82DSP controls the internal supply voltage of the Class-D output stages, depending upon the audio signals of all eight channels. This combination guarantees unparalleled overall efficiency and minimal heat generation. An Interface in any case Whether it be the Aux input for an ipod/iphone, optical input for digital sources with virtually any scanning sampling rate from khz or a preamplifier output for the connection of additional output stages PP 82DSP leaves nothing to be desired. Functionality on request The optional cable remote control is just as flexible as the PP 82DSP both controllers and the selector switch are freely assignable using via our PC tool software. You can decide whether you want to use it for controlling the overall volume, subwoofer level or the Aux input, for example. Various functions can also be assigned to the switch. Eight in one fell swoop This is truly remarkable for an amplifier in this performance class all eight channels of the PP 82DSP are configurable with DSP functions via the PC software. Four of these channels can even be mixed through a signal matrix consisting of arbitrary input signals. Features PP 82DSP: - Proprietary Class HD technology for unparalleled efficiency and minimal heat generation - Eight independently configurable amplifier channels for maximum flexibility - Extremely high performance DSP with virtually boundless sound engineering opportunities; freely configurable using PC software - 56 bit DSP technology and 24 bit AD/DA converter from Burr-Brown - Optical S/PDIF input khz with integrated sampling converter - USB-on-board for direct connection to a PC - Freely configurable to two-channel pre-out for the connection of additional amplifiers - Aux input with automatic or manual changeover - Start/stop capability, all the way down to 6V supply voltage - The latest D/A converter-controlled P³S power supply technology with "ECO Mode" - Connection for optional cable remote control, functionality configurable using PC software - State-of-the-art SMD technology for a smaller footprint and maximum reliability - Printed circuit boards in sixfold multilayer technology for optimal power and signal transmission 11

12 The right bass for every purpose the brand-new subwoofers are the ideal complement to the MATCH amplifiers. Choose your dream combination based on available space in your trunk and your personal demand not only to hear the music but to feel it. These subs are the best example of how an intelligent teamwork of amplifier and speakers, thanks to sophisticated DSP technology, can create intense bass you can feel inside the vehicle, even with extremely small dimensions. The secret lies in the meticulous matching of components only in concert with the MATCH amplifiers can these subwoofers ascend to the heights of audio brilliance. Feel the Power The space savers 12

13 Enclosure subwoofers A MATCH made in heaven All MATCH enclosure subwoofers are designed as so-called "highpass filtered vented systems". This means that a suitable highpass filter in DSP must be configured, so that these subwoofers can deliver the right performance. In the latest PC-Tool software, the appropriate settings are already saved and can be retrieved at the "push of a button". The simple connection A pre-assembled connection cable (4.8 m long) is included with all MATCH enclosure subwoofers. Thanks to the coded plug connectors, it is impossible to hook up the wrong connection by accident. This means that the connection to the MATCH amplifiers is a snap. A great bass without loss of space The PP 7S-D fits inside the spare wheel compartment on most vehicles in place of the spare wheel. This means that not one liter of precious trunk capacity is lost. The woofer is attached to the central bolt which normally holds the spare wheel into place. This means you can derive maximum bass enjoyment with a minimum space requirement. Features of enclosure subwoofers: - Optimized for MATCH plug & play amplifiers - Extremely easy connection of pre-assembled subwoofer wiring assemblies (in the delivery) - Incredibly stiff, scooped paper membranes - High-endurance voice coils with large layer widths - Double-vented voice coils for minimized compression effects - Sturdy metal grille offers optimal protection for your woofers 13

14 PP 7E-D PP 7S-D Compact bass-reflex subwoofer, equipped with two 165 mm woofers with dual voice coil, impedance 4 x 2 ohms Round bass-reflex subwoofer, equipped with two 165 mm woofers with dual voice coil, impedance 4 x 2 ohms, fits into many spare wheel recesses instead of the spare wheel. PP 7E-D PP 7S-D RMS / max. power: Sensitivity Impedance Linear cone excursion: Dimensions (H x W x D): 200 / 400 watts 90 db 1W / 1m 4 x 2 ohms +/- 5 mm 280 x 318 x 310 mm RMS / max. power: 200 / 400 watts Sensitivity 90 db 1W / 1m Impedance 4 x 2 ohms Linear cone excursion: +/- 5 mm Dimensions (H x W x D): 500 x 120 mm 14

15 Enclosure subwoofers PP 8E-Q PP 10E-D Extremely compact "downfiring" bass reflex subwoofer with only 9 liters of net volume, 200 mm woofer with fourfold (quad coil) voice coil, impedance 4 x 3 ohms Particularly high-performance bass reflex subwoofer with two 250 mm woofers with dual voice coil and impedance of 4 x 2 ohms PP 8E-Q PP 10E-D RMS / max. power: 200 / 400 watts RMS / max. power: 300 / 600 watts Sensitivity 87 db 1W / 1m Sensitivity 91 db 1W / 1m Impedance 4 x 3 ohms Impedance 4 x 2 ohms Linear cone excursion: +/- 6.5 mm Linear cone excursion: +/- 5.5 mm Dimensions (H x W x D): 189 x 340 x 310 mm Dimensions (H x W x D): 375 x 400 x 415 mm 15

16 self-made Bass Power PP 72W-D You didn't find the right type of product? In case none of the four MATCH enclosure subwoofers fit the optimal styling in your vehicle, then the PP72 W-D and PP8 W-Q woofers offer the opportunity for customizing your own subwoofer. These single chassis are exactly identical to the systems fitted in the various enclosure models. As long as your customized cabinet conforms to our specifications with respect to the net volume and the matching of the bass reflex channel, identical sound performance is guaranteed. 1 pair of 165 mm subwoofers with 2x2 ohms dual voice coil for compact bass reflex enclosures (approx. 15 liters of net volume), connection terminal included in delivery PP 72W-D (per subwoofer) RMS / max. power: 100 / 200 watts Sensitivity 87 db 1W / 1m Impedance 2 x 2 ohms Resonance frequency: 53 Hz Qes: 3.3 Qes: 0.41 Qts: 0.37 VAS: 7.9 liters Linear cone excursion: +/- 5 mm Installation depth: 80 mm Installation diameter: 134 mm 16

17 Subwoofer Chassis: PP 8W-Q 200 mm subwoofer with 4x3 ohms quad voice coil for extremely compact bass reflex housings (approx. 9 liters of net volume), connection terminal included in delivery Peak of Professionalism In order to make your life as easy as possible when designing your own enclosure, the MATCH single subwoofers already contain the appropriate connection terminal with pre-assembled plug connectors. This means you won't even need a soldering iron to connect it to the woofer. You decide the length Those building their own enclosure also require an adequate connection cable to the MATCH amplifier. These are available individually allowing you to choose from among three different lengths (1 m, 3.3 m or 4.8 m). PP 8W-Q RMS / max. power: 200 / 200 watts Sensitivity 87 db 1W / 1m Impedance 4 x 3 ohms Resonance frequency: 37 Hz Qes: 5.4 Qes: 0.57 Qts: 0.51 VAS: 23 liters Linear cone excursion: +/- 6.5 mm Installation depth: 105 mm Installation diameter: 183 mm Features of subwoofer chassis: - Incredibly stiff, scooped paper membranes - High-endurance voice coils with large layer widths - Double-vented voice coils for minimized compression effects - Powerful magnet drives for compact bass reflex enclosure - Connection terminal for MATCH subwoofer cables included in delivery 17

18 PLUG & PLAY Upgrade Your Audio System! Why replace equipment when you can complement them - a mere two additional components provide for a dramatic improvement in sound reproduction and a significant increase in the dynamics themselves in connection with the original radio and the standard speaker installation. The following graphic illustrates the simple plug & play concept for which not one single cable needs to be cut in your vehicle. Everything is pre-assembled and can be plugged together in ways protecting it against polarity reversal. Particularly important for leasing vehicles - all components can be removed again without leaving a trace! ingenious Simple Original head unit MATCH amplifier MATCH subwoofer cabel Original connector of the head unit Vehicle-specific MATCH cable MATCH subwoofer More is less For anyone worried that the original speakers won't withstand the additional power of the MATCH amplifiers, we can allay their concerns. Because although double the power is available per channel compared to the original car radio, the speakers are in fact subjected to far less mechanical stress. Why? Because the subwoofer does all the "heavy labour" and takes care of the reproduction of the low frequencies. The remaining speakers are relieved of the very low frequencies due to matched, high-slope highpass filters. Less cone excursion means a lower load on the speaker and less risk of exciting resonance in the installation location of the speakers. Finally, dedicated limiters ensure that the amplifiers will not be overdriven, which in turn protects your speakers. 18

19 Accessories We dazzle You marvel! It really is fascinating how much sound potential you can coax out of OE-speakers. But just getting an additional power is only half the story. Because these days an amplifier has to offer much more. The intelligence is revealed in the digital processors in our MATCH amplifiers, whose incredible processing power can compensate for virtually all the inadequacies of the original speakers as well as the individual vehicle acoustics. Per channel there are up to 30 equalizer bands available. Add to this variable highpass and lowpass filters, along with a for the driver s seat optimized time-alignment ensure to experience the music precisely from the front and not diffused from the side. The figure shows three curves: red = reference curve green = measurement of a standard sound system blue = measurement after the MATCH installation and DSP correction URC 2A The matching cable remote control for the PP 52DSP and PP 82DSP amplifiers offers not only the option of adjusting the level of the subwoofer or an additional incoming AUX source conveniently from the driver's seat but also shutting off the vehicle-specific sound tuning. This allows you to present the "aha" effect of sound optimization in a particularly spectacular way. Those creating their own sound setup using our DSP PC-Tool software can even configure the function of the controllers and switches on the URC 2A according to their own taste. Vehicle-specific adapters 40 different adapters for some 2,500 different vehicles are available and enable connection of the MATCH amplifiers to the original cable harness of the vehicle without having to cut through a single wire. These adapters are combined with ISO connection cables that come along with the PP 52DSP and PP 82DSP amplifiers. By contrast, on the vehicle-specific PP 41DSP variant, an adapter is no longer required, as everything is included in the delivery. Cable lengths for all needs The cables that come with our amplifiers and subwoofers are optimized in terms of their length for the typical installation positions. For other installation places, however, it may be useful or necessary to use longer or even shorter variants. Here Audiotec Fischer also provides the right product for virtually every product use. Regardless of whether it involves the ISO amplifier connection cable or the feed line to the subwoofer other lengths are optionally available. 19

20 AUDIOTEC FISCHER GmbH Hünegräben 26, Schmallenberg Phone: Fax: match@audiotec-fischer.com Internet: Distribution: AUDIO DESIGN GmbH Am Breilingsweg 3, Kronau Phone: Fax: info@audiodesign.de Internet: 20