928 E. 10 Mile Road (Site Plan)

Transcription

1 928 E 10 Mile Rd -Site Plan February 8, Page 1 of 4 Community and Economic Development Staff Report to the Planning Commission February 8, E. 10 Mile Road (Site Plan) REQUEST APPLICANT OWNER LOCATION Site Plan Approval H.F. Architecture 628 E. Parent, #107 Royal Oak, MI Duke and Duke Investments, LLC 928 E. 10 Mile Road, between Horton and Inman Streets FILE NO. PARCEL NO ZONING STAFF R-3, Single/Multiple-Family Residential Justin Lyons, Planner Summary H.F. Architecture is requesting site plan approval, on behalf of Duke and Duke Investments, LLC, for the subject site at 928 E. 10 Mile Road. The R-3 (Single/Multiple-Family Residential) zoned property currently includes the former El Shaddai Church and is bounded by existing single-family homes to the east, west, and south. The proposed plans are for a two-story multiple-family residential building with 28 units to replace the existing church building and reconfigure the off-street parking lot. The applicant presented a concept site plan at the August 2016 regular Planning Commission meeting and has since made suggested changes to the plan prior to site plan submittal. The Planning Commission suggested the applicant add landscaping, consider ways to break up the façade with architectural features, evaluate site circulation, and provide more details regarding building materials. The majority of these items have been addressed by the applicant through many conversations with staff. The current site plan would require one waiver from the Planning Commission concerning building façade length. According to section (a), a multiple-family building façade may not exceed 150 feet in length unless waived by the Planning Commission. The E. 10 Mile Road north façade of the proposed building measures 260 feet in length, but is partitioned with a center entryway with a glassenclosed lobby, covered architectural feature, and elevated parapet. Updated landscaping and a mixture of evergreen and locust trees were proposed to add further variety along the E. 10 Mile elevation. As noted in section (d)(6), the Planning Commission may waive this requirement. Please see below for the full site plan review report.

2 928 E. 10 Mile Road-Site Plan February 8, Page 2 of 4 Adjacent Land Uses and Zoning The subject site is zoned R-3 (Single/Multiple-Family Residential) and includes one (1) parcel. The site is adjacent to R-1 (Single-Family Residential) to the south, R-3 (Single/Multiple-Family Residential) to the west and east, and I-696 expressway to the north. The proposed multiple-family dwelling use is permitted in the R-3 zoning district. The 2016 future land use of the site is classified Urban Residential, adjacent to Traditional Residential to the south. Site Plan Considerations 1. Access and Circulation. The existing off-street parking areas for the former church are proposed to be consolidated behind the new development in accordance with zoning ordinance requirements that prohibit parking in the front setback. The applicant proposes to close two of the four existing curb cuts on-site to direct residents and visitors to access the complex via the former alley ingress/egress on Inman and Horton Streets. Inman and Horton Streets currently have in-street blockades that were installed due to I-696 cut through traffic from the service drive into the neighborhood. The applicant proposed for the Horton Street blockade to remain as-is, but for the existing Inman Street blockade to be moved at the developer s expense just south of the new development. Constructing a new Inman Street blockade south of the development s east access would continue to limit cut through traffic and allow residents to access the new development s parking lot from E. 10 Mile Road. The off-street parking ordinance (Sec ) requires 1.5 parking spaces per dwelling unit, plus 1 per each 10 dwelling units for guest parking. The site plan proposes a total of 44 spaces, including two (2) handicap spaces in the rear parking area. Sec (e) requires sufficient bike racks based on a minimum of one bike for every ten automobiles or one bike for every 3,000 square feet of building floor area, whichever is greater. The required 10 bicycle parking spaces are provided for residents and guests at the south entry. 2. Building Design. The proposed 28 unit multiple-family residential building includes modern architectural elements and building materials. All units are proposed in a two-story building that stretches along E. 10 Mile Road with a 260 feet façade width. As stated previously, the façade of the proposed building exceeds the 150 feet length requirement. The applicant proposes to partition the building with a center entryway with a glass-enclosed lobby, covered architectural feature, and elevated parapet. Updated landscaping and a mixture of evergreen and locust trees were proposed to add further variety along the E. 10 Mile elevation. Exterior building materials include vertical siding with galvalume on the first floor and painted cement fiber board on the second floor. Residential units would have alum-clad windows on the exterior of each unit. The majority of the building is approximately 23 feet in height with a five (5) foot parapet on each end. A center parapet would be 31 feet in height to provide architectural variety. The applicant does not propose rooftop mechanical on the building, but should any be required, screening detail would be provided. 3. Waste Receptacle. The site currently contains a non-conforming waste receptacle that is unscreened. The applicant proposes a new waste receptacle that is screened with masonry and a wood gate in accordance with Section The waste receptacle is the required 20 feet from the adjacent residential properties to the south and includes a concrete pad of at least six (6) inches of depth.

3 928 E. 10 Mile Road-Site Plan February 8, Page 3 of 4 4. Landscaping. The landscape plan proposes a total of 18 trees (deficient by two trees), decorative grasses, and masonry screening and generally adheres to the landscape and tree requirements. As denoted in Sec (c) (5), a six (6) inch concrete curb is proposed between the parking and landscaping in the off-street parking lot. The site currently contains two (2) trees in poor condition that are scheduled to be replaced during site development according the conditions outlines in Sec (h). As noted in the tree replacement ordinance, replacement trees may count toward the overall tree total if proposed trees are canopy trees. The proposed Sunburst Locust trees meet the requirement as canopy tree species. Staff recommends the applicant provide two (2) additional canopy trees to the rear parking lot area or pay into the City s tree fund for two (2) trees if the site cannot provide adequate planting area to meeting the tree requirement. The following table provides a summary of the proposed landscaping according to the requirements set forth in Section and the Vegetation Ordinance: Type Ordinance Requirement Proposed Existing Min. 8 tree replacements for each 15,000 SF 16 replacement trees 16 total canopy (Locust) trees Greenbelt (N) 1 deciduous tree for every 30 of road frontage (280 /30 ) Greenbelt (W) 1 deciduous tree for every 30 of road frontage (58 /30 ) Greenbelt (E) 1 deciduous tree for every 30 of road frontage (58 /30 ) Screening Wall (S) Screening wall where off-street parking abuts residential Parking 3 trees for every 25 parking spaces; Hedge row, 3 brick wall, or 3 wrought iron fence with hedge 9 deciduous trees 7 Locust trees and 2 Evergreen trees 2 deciduous trees 3 Locust trees and decorative tall grasses 2 deciduous trees 3 Locust trees and decorative tall grasses 5-8 masonry screen wall 6 trees and either a hedge row, 3 brick wall, or 3 wrought iron fence with hedge row 6 existing masonry screen wall and decorative tall grasses 3 Locust trees, decorative tall grasses, and 3 wrought iron fence with hedge row 5. Lighting. The exterior lighting plan proposes 10 wall packs attached to the new development and three (3) parking lot lights. Manufacturer cut sheets have been provided for both types of lights and appear to meet ordinance requirements of being shielded and directed downward. The proposed exterior lighting levels meet ordinance with a maximum of 0.1 footcandle at the residential lot line on the south portion of the property. Site Plan Summary The applicant requests site plan review/approval of the 28 unit multiple-family development. Should the Planning Commission deem the proposed site plan application satisfactory, staff would work with the applicant to satisfy the minor conditions proposed as part of an administrative final site plan approval.

4 928 E. 10 Mile Road-Site Plan February 8, Page 4 of 4 Site Plan Approval Motion MOTION by, seconded by, in the matter of 928 E. 10 Mile Road, the Planning Commission APPROVE the Site Plan, based on plans dated received by the Planning Department on January 30, 2017, with the following findings and subject to the following conditions: Findings a) The site plan and supporting documents demonstrate that all applicable requirements of the Zoning Ordinance, as well as other City ordinances, standards, and requirements, can be met subject to the conditions noted below. b) The proposed improvements should have a satisfactory and harmonious relationship with the development on-site as well as existing land uses in the adjacent vicinity. c) The proposed multiple-family development will not have an unreasonably detrimental or injurious effect upon the natural characteristics and features of the site or those of the surrounding area. d) The Planning Commission waived the requirement to allow the building façade to exceed 150 feet in length. Conditions a) Final details of the civil engineering plans and survey will be provided as part of final site plan submittal. b) Staff will work with the developer and adjacent residents regarding the final configuration of the Inman Street blockade to be provided as part of final site plan approval. c) The maneuvering lanes in the southeast parking area will be revised to the required 24 foot width on the final site plan. d) The landscape plan will be updated to demonstrate the following as part of final site plan submittal: 1. The proposed six (6) inch concrete curb between the parking and landscaping in the off-street parking lot will be illustrated on the plan. 2. The proposed five (5) foot sidewalk will be noted on the site and landscape plan adjacent to the south entry. 3. The two (2) required trees will be included on the final plan or payment for two trees would be required into the City s tree fund.

5 RESIDENTIAL APARTMENT BUILDING 928 EAST 10 MILE ROAD H F : a r c h i t e c t u r e R H A R M O N Y F O R M 628 EAST PARENT AVENUE SUITE 107 ROYAL OAK MICHIGAN FERNDALE, MICHIGAN ARCHITECTURAL SHEET INDEX: EXISTING CONDITION MAP/ SHEET INDEX ZONED: R-1 ZONED: R-3 ZONED: R EAST 10 MILE ZONED: R-3 ZONED: R-3 ZONED: R-1 OVERALL SITE PLAN FIRST LEVEL PLAN SECOND LEVEL PLAN TYPICAL UNIT (ONE-TWO BEDROOM) PLANS SOUTH/NORTH ELEVATIONS EAST/WEST ELEVATIONS LANDSCAPE PLAN PHOTOMETRIC PLAN AS00 A101 A102 A103 A200 A201 L101 P101 P R O J E C T I S S U E F O R I S S U E D A T E PLANNING COMMISSION SUBMITTAL RESIDENTIAL APARTMENT BUILDING 928 EAST 10 MILE ROAD FERNDALE, MICHIGAN NORTH EXISTING CONDITION MAP NOT TO SCALE

6 H F : a r c h i t e c t u r e R H A R M O N Y F O R M HORTON STREET 24'-0" 24'-0" P R O J E C T I S S U E F O R I S S U E D A T E PLANNING COMMISSION SUBMITTAL EAST PARENT AVENUE SUITE 107 ROYAL OAK MICHIGAN EAST 10 MILE ROAD ZONED: R-3 ZONED: R-3 EXISTING BLOCKADE TO REMAIN INGRESS/ EGRESS WIDTH ZONED: R-1 NORTH OVERALL SITE PLAN INGRESS/ EGRESS WIDTH SCALE: 1" = 20'-0" INMAN STREET RESIDENTIAL APARTMENT BUILDING 928 EAST 10 MILE ROAD EXISTING BLOCKADE TO BE REMOVED NEW 45 DEG ANGLED BLOCKADE. FERNDALE, MICHIGAN AS00

7 HORTON STREET 24'-0" EXISTING BLOCKADE TO REMAIN INGRESS/ EGRESS WIDTH 5'-0" WIDE CONC. SIDEWALK ' 44'-0" 58'-0" 10'-0" 10'-0" WALL MOUNTED LIGHT FIXTURE (DIRECT DOWNWARD) BATH UP TO SECOND LEVEL 10'-0" BEDROOM STORAGE 24'-0" 18'-0" 2'-0" DRIVE AISLE WIDTH BEDROOM UNIT (100) WALL MOUNTED LIGHT FIXTURE (DIRECT DOWNWARD) WALL MOUNTED LIGHT FIXTURE (DIRECT DOWNWARD) 936 SF UNIT (113) 900 SF LIVING/ KITCHEN 9'-0" LEGAL DESCRIPTION: T1N, R11E, SEC 27 WOODWARD HEIGHTS ROYAL OAK LOTS 42 TO 46 INCL, ALSO LOTS 130, 131 & 132, ALSO 1/2 OF VACATED ALLEY ADJ TO ALL SD LOTS FR 050. ZONED: R-1 LIVING/ KITCHEN 110'-0" 118'-0" UNIT (101) 900 SF UNIT (112) 900 SF ' BEDROOM STORAGE 6'-0" HIGH PROPERTY LINE BEDROOM BATH UNIT (111) 900 SF WALL MOUNTED LIGHT FIXTURE (DIRECT DOWNWARD) WALL MOUNTED LIGHT FIXTURE (DIRECT DOWNWARD) UNIT (102) 15'-6" EAST 10 MILE ROAD ' 7'-6" 53.00' 260'-0" 400 SF 900 SF 900 SF LIFT MAILBOXES SITE BUILDING INFORMATION: ZONED: R-3 TAX ID # TOTAL LOT SIZE: 38,780 SF (.89 ACRES) BUILDING FOOTPRINT: 15,010 SF LOT COVERAGE: 15,010/ 38,780 = 38.7% PROPOSED BUILDING HEIGHT: 28'-0" TOTAL BUILDING SIZE: 15,010 x 2 = 30,020 SF TOTAL # OF RESIDENTIAL UNITS: 14 UNITS PER FLOOR x 2 = 28 UNITS TOTAL # PARKING SPACES: 44 SPACES + 2 HC SPACES LOBBY 5 BIKE RACKS (10 BIKES TOTAL) STUDIO UNIT (103) LAUNDRY ROOM UP TO SECOND LEVEL UNIT (104) UNIT (110) 900 SF 24'-0" 600 SF 134'-6" ONE-BEDROOM UNIT (109) 134'-6" 44 PARKING SPACES + 2 HANDICAP SPACES 18'-0" 20'-0" 18'-0" 18'-0" 9'-0" UNIT (105) 900 SF 936 SF 17'-0" ' ONE-BEDROOM UNIT (108) 8'-0" 600 SF UNIT (106) UNIT (107) 13 HC HC 14 6'-0" HIGH PROPERTY LINE WALL MOUNTED LIGHT FIXTURE (DIRECT DOWNWARD) 5'-0" WIDE CONC. SIDEWALK WALL MOUNTED LIGHT FIXTURE (DIRECT DOWNWARD) LIVING/ KITCHEN 5 4 BATH BEDROOM TRASH ENCLOSURE 6'-0" HIGH PROPERTY LINE 5 WALL MOUNTED LIGHT FIXTURE (DIRECT DOWNWARD) LIVING/ KITCHEN 900 SF 20'-0" 15'-0" MAX TALL PARKING LOT LIGHT POLE/ FIXTURE (TYPICAL OF 3). LIGHT FIXTURE SHALL BE DIRECT DOWNWARD & SHIELDED FROM THE ADJ. PROPERTIES BEDROOM WALL MOUNTED LIGHT FIXTURE (DIRECT DOWNWARD) STORAGE 5 18'-0" UP TO SECOND LEVEL 24'-0" BATH BEDROOM INGRESS/ EGRESS WIDTH WALL MOUNTED LIGHT FIXTURE (DIRECT DOWNWARD) 10'-0" 3'-0" HIGH WROUGHT IRON FENCE + BOXWOOD HEDGE ROW ' 16.00' 45.00' 5'-0" WIDE CONC. SIDEWALK 5'-0" WIDE CONC. SIDEWALK EXISTING BLOCKADE TO BE REMOVED NEW 45 DEG ANGLED BLOCKADE. INMAN STREET H F : a r c h i t e c t u r e R H A R M O N Y F O R M P R O J E C T I S S U E F O R I S S U E D A T E 628 EAST PARENT AVENUE SUITE 107 ROYAL OAK MICHIGAN PLANNING COMMISSION SUBMITTAL RESIDENTIAL APARTMENT BUILDING EAST 10 MILE ROAD FERNDALE, MICHIGAN NORTH FIRST LEVEL PLAN SCALE: 1" = 10'-0" A101

8 EAST 10 MILE ROAD R 5'-0" WIDE CONC. SIDEWALK GRASS 2 NEW EVERGREEN EACH SIDE OF ENTRANCE GRASS 7 NEW LOCUST TREES (TYPICAL NEW TREES ALONG EAST 10 MILE ROAD) TALL DECORATIVE FOUNTAIN GRASSES (TYPICAL). IRRIGATION SYSTEM SHALL BE ALL LANDSCAPE AREAS. H F : a r c h i t e c t u r e H A R M O N Y F O R M 628 EAST PARENT AVENUE SUITE 107 ROYAL OAK MICHIGAN HORTON STREET 5'-0" WIDE CONC. SIDEWALK GRASS 3 NEW LOCUST TREES (TYPICAL NEW TREES ALONG INMAN) LANDSCAPE NOTES & COMMENTS: A. INSTALLATION OF ALL PLANT MATERIAL SHALL BE IN STRICT ACCORDANCE WITH THE LATEST EDITION OF THE AMERICAN ASSOCIATION OF NUSERYMAN LANDSCAPE STANDARDS, AND WITH THE SPECIFICATION SET FORTH BY THE CITY OF FERNDALE PLANNING DEPARTMENT. B. ALL LANDSCAPING SHALL BE MAINTAINED IN A HEALTHY, NEAT AND ORDERLY STATE, FREE FROM REFUSE & DEBRIS. ANY DEAD OR DISEASED PLANTS SHALL BE REMOVED AND REPLACED WITHIN 12 MONTHS. C. ALL PLANTINGS SHALL BE COMPLETED WITHIN A THREE (3) MONTH TIME PERIOD AND SHALL NOT BE PLANTED LATER THAN THE 30TH OF NOVEMBER, NOR EARLIER THAN THE FIRST (1ST) DAY OF APRIL. D. ALL PLANTING BEDS ARE TO BE MULCHED WITH FOUR (4") INCH OF SHREDDED BARK, NON-TREATED, OVER TYPAR WEED BARRIER OR APPROVED EQUAL MATERIAL. PLANTING BEDS SHALL HAVE ONE-EIGHTH (1/8") BY FOUR (4") BLACK ANODIZED PERMA-LOC ALUM. EDGING AT ALL BORDERS. E. DIG ALL SHRUB PITS ONE FOOT (1'-0") LARGER THAN THE SHRUB ROOT BALL. TREE PITS SHALL BE THREE (3'-0") LARGER THAN THE TREE ROOT BALL AND BACK-FILLED WITH ONE (1) PART TOPSOIL AND ONE (1) PART SOIL FROM THE EXCAVATED PIT AREA. F. REMOVE ALL TWINE AND WIRE FROM ROOT BALL AND PLANT TOPS. CHECK ALL PLANT MATERIALS. G. ORGANIC FRIABLE TOPSOIL SHALL BE EVENLY DISTURBED AND FINELY GRADED OVER ALL AREAS TO RECEIVE AWNS, AT A UNIFORM DEPTH OF FOUR (4") INCHES AFTER SETTLEMENT. H. LAWN TREES SHALL HAVE A FOUR FEET (4'-0") DIAMETER MULCH RING, 4" DEEP SHREDDED HARDWOOD BARK MULCH, 3" CLEAR FROM TRUNK OF TREE. MATERIALS: 6'-0" HIGH PROPERTY LINE QTY 100 QTY 16 BOTANICAL NAME ARRENATHERUN elatius "variegatum" BOTANICAL NAME GLEDITSIANTRIACANTHOS INERMIS 1. PLANT MATERIAL SHALL NOT BE LOCATED WITHIN FOUR FEET (4'-0") OF ANY PROPERTY LINE. 2. REQUIRED LANDSCAPING MATERIALS SHALL SATISFY AMERICAN ASSOCIATION OF NURSERYMAN STANDARDS AND BE:! a. NUSERY GROWTH! b. STATE OF MICHIGAN DEPARTMENT OF AGRICULTURE INSPECTED! c. NUMBER 1 GRADE, WITH STRAIGHT, UNSCARRED TRUNKS, AND WELL!! DEVELOPED, UNIFORM CROWN, (NOTE- PARK-GRADE TREES WILL NOT BE! ACCEPTED).! d. STAKED, WRAPPED, WATERED, AND MULCHED PER CITY OF FERNDALE!! PLANNING DEPARTMENT STANDARDS AND REQUIREMENTS WITH! COMMUNITY SPECIFICATIONS.! e. GUARANTEED FOR A PERIOD OF ONE (1) YEAR. 3. TOPSOIL SHALL BE FERTILE, FRIABLE AND REPRESENTATION OF PRODUCTIVE SOIL, CAPABLE OF SUSTAINING VIGOROUS PLANT GROWTH AND SHALL BE DARK ORGANIC NATURAL SURFACE SOIL, EXCLUSIVE OF PEAT, MUCK AND/OR DARK BROWN BLACK LOAM, CLAY LOAM, SILT LOAM OR SANDY CLAY. 4. COBBLESTONE MULCH SHALL BE SIZED AT TWO INCH(2) TO SIX INCH (6) AT A DEPTH OF 12" OVER A TYPAR WEED BARRIER. 5. ALL LANDSCAPE AREAS SHALL BE PROVIDED WITH AN AUTOMATIC TIME-CONTROLLED SPRINKLER WATERING IRRIGATION SYSTEM. THIS SYSTEM SHALL BE DESIGNED AND LAID OUT TO COVER ALL LANDSCAPE AREAS. A FULL AND COMPLETE LAYOUT WITH SPECIFICATIONS OF THIS SPRINKLER SYSTEM SHALL BE PREPARED BY A CERTIFIED LANDSCAPE SPRINKLER CONTRACTOR FOR SUBMISSION TO THE CITY OF FERNDALE FOR REVIEW AND CONSIDERATION AND COMPLIANCE WITH THEIR STANDARDS. PLANT SCHEDULE TREE SCHEDULE COMMON NAME VARIEGATED OAT GRASS COMMON NAME SUNBURST LOCUST GENERAL: SIZE 14" HGT. TRUNK SIZE 2 1/2"-3" REMARKS ORNAMENTAL GRASS TUFT FORM REMARKS 1. ALL LANDSCAPE AREAS SHALL BE EXCAVATED OF ALL BUILDING MATERIALS AND DEBRIS TO A MINIMUM DEPTH OF EIGHTEEN INCHES (18") AND BACK-FILLED WITH A MEDIUM TEXTURED PLANTING SOIL. ALL LANDSCAPE AREAS ARE TO BE A MINIMUM SIX INCHES (6") OF TOPSOIL, AND ARE TO BE CROWNED A MINIMUM OF SIX INCHES (6") HIGHER THAN ADJACENT CURBS, SIDEWALKS AND PAVEMENT AREAS. 2. REPORT ALL CHANGES, SUBSTITUTIONS OR DELETIONS TO THE LANDSCAPE PLAN THAT HAVE BEEN REVIEWED AND APPROVED BY THE CITY OF FERNDALE PLANNING DEPARTMENT. 3. ALL PLANT MATERIALS AND SPECIFICATIONS ARE SUBJECT TO CHANGE PER UNKNOWN SITE CONDITIONS, ON SITE INSPECTIONS OR BY THE REQUEST OF THE CITY OF FERNDALE. 4. DO NOT PLANT DECIDUOUS OR EVERGREEN TREES DIRECTLY UNDER OVERHEAD POWER OR COMMUNICATION LINES OR ELEMENTS. 5. ALL PLANT MATERIALS QUANTITIES ARE INDICATED ON THE PLANT MATERIALS LISED WITHIN THE SCHEDULES. IF ADDITIONAL PLAN MATERIALS ARE REQUIRED BY CITY INSPECTORS UPON FIELD REVIEW, NO ADDITIONAL PLANT MATERIALS, SHALL BE INSTALLED UNTIL WRITTEN NOTICE IS PROVIDED BY SAID INSPECTOR AS TO REASONS FOR ADDITIONAL MATERIALS TO A SPECIFIC LOCATION. 6. SCULPTURED LAND FORMS SHALL BE WELL-DRAINED, ORGANIC TOPSOIL AND FINELY GRADED TO BE STABILIZED BEFORE PLANTING AND SEEDING. B & B 6'-0" HIGH PROPERTY LINE 3 NEW LOCUST TREES TALL DECORATIVE FOUNTAIN GRASSES (TYPICAL). IRRIGATION SYSTEM SHALL BE ALL LANDSCAPE AREAS. 6'-0" HIGH PROPERTY LINE 44 PARKING SPACES + 2 HANDICAP SPACES TALL DECORATIVE FOUNTAIN GRASSES (TYPICAL). IRRIGATION SYSTEM SHALL BE ALL LANDSCAPE AREAS. 3 NEW LOCUST TREES (TYPICAL NEW TREES ALONG INMAN) 3'-0" HIGH WROUGHT IRON FENCE + BOXWOOD HEDGE ROW GRASS 5'-0" WIDE CONC. SIDEWALK 5'-0" WIDE CONC. SIDEWALK INMAN STREET P R O J E C T I S S U E F O R I S S U E D A T E PLANNING COMMISSION SUBMITTAL RESIDENTIAL APARTMENT BUILDING 928 EAST 10 MILE ROAD FERNDALE, MICHIGAN NORTH LANDSCAPE PLAN SCALE: 1" = 10'-0" L101

9 H F : a r c h i t e c t u r e H A R M O N Y F O R M 628 EAST PARENT AVENUE SUITE 107 ROYAL OAK MICHIGAN R Calculation Summary Description Units Avg Max Min Avg/Min Max/Min GRADE Fc PARKING/DRIVE AISLE Fc Luminaire Schedule Symbol Qty Description Lum. Lumens LLF Lum. Watts Total Watts 10 44WT LED VISOR FULL CUTOFF WALLPACK - 10' AFG TYPE IV SALIENT FULL C/O LED AREA LIGHT 15' AFG P R O J E C T I S S U E F O R I S S U E D A T E PLANNING COMMISSION SUBMITTAL RESIDENTIAL APARTMENT BUILDING 928 EAST 10 MILE ROAD FERNDALE, MICHIGAN NORTH PHOTOMETRIC LIGHTING PLAN SCALE: 1" = 10'-0" P101

10 HORTON STREET 44'-0" 58'-0" 10'-0" 10'-0" DN TO FIRST LEVEL BATH BEDROOM STORAGE BEDROOM UNIT (200) 110'-0" 118'-0" 15'-6" EAST 10 MILE ROAD 936 SF 900 SF 580 SF 900 SF UNIT (201) 900 SF BATH UNIT (213) 900 SF LIVING/ KITCHEN LIVING/ KITCHEN UNIT (212) 900 SF BEDROOM STORAGE BEDROOM UNIT (211) 900 SF UNIT (202) LIFT ELEC ROOM 7'-6" UPPER LOBBY 260'-0" ONE-BEDROOM UNIT (203) LAUNDRY ROOM DN TO FIRST LEVEL UNIT (204) UNIT (210) 900 SF 600 SF 134'-6" ONE-BEDROOM UNIT (209) LIVING/ KITCHEN UNIT (205) 134'-6" 900 SF 936 SF BATH BEDROOM ONE-BEDROOM UNIT (208) 600 SF UNIT (206) UNIT (207) LIVING/ KITCHEN 900 SF BEDROOM STORAGE BATH BEDROOM DN TO FIRST LEVEL 10'-0" INMAN STREET H F : a r c h i t e c t u r e R H A R M O N Y F O R M P R O J E C T I S S U E F O R I S S U E D A T E 628 EAST PARENT AVENUE SUITE 107 ROYAL OAK MICHIGAN PLANNING COMMISSION SUBMITTAL RESIDENTIAL APARTMENT BUILDING EAST 10 MILE ROAD FERNDALE, MICHIGAN NORTH SECOND LEVEL PLAN SCALE: 1" = 10'-0" A102

11 ALUM-CLAD WINDOWS/ DOORS H F : a r c h i t e c t u r e R H A R M O N Y F O R M 628 EAST PARENT AVENUE SUITE 107 ROYAL OAK MICHIGAN CEMENT FIBER BOARD/ BATTEN (VERTICAL) SIDING TO BE PAINTED 6'-0" HIGH PROPERTY LINE SECOND LEVEL 28'-0" 3'-0" 6'-0" 3'-0" 3'-0" HIGH WROUGHT IRON FENCE + BOXWOOD HEDGE ROW FIRST LEVEL NEW DRIVE APPROACH EAST 10 MILE ROAD 11'-0" 28'-0" 3'-0" ALUM-CLAD WINDOWS/ DOORS CEMENT FIBER BOARD/ BATTEN (VERTICAL) SIDING TO BE PAINTED VERTICAL SIDING (COLD EXTRUDED GALVALUME) VERTICAL SIDING (COLD EXTRUDED GALVALUME) 11'-0" EAST 10 MILE ROAD EAST ELEVATION SECOND LEVEL 6'-0" HIGH PROPERTY LINE FIRST LEVEL 6'-0" NEW DRIVE APPROACH SCALE: 1" = 10'-0" WEST ELEVATION SCALE: 1" = 10'-0" P R O J E C T I S S U E F O R I S S U E D A T E PLANNING COMMISSION SUBMITTAL RESIDENTIAL APARTMENT BUILDING 928 EAST 10 MILE ROAD FERNDALE, MICHIGAN A201

12

13

14

15

16

17

18

19

20

21

22

23

24

25 Technical Specifications SALIENT a r e a l e d TM The Simkar Salient LED area luminaires utilize high brightness LEDs and precision optics to provide superior uniformity and maximize pole spacings while using up 60% less energy and operating for 60,000 hours (L70). Designed to replace 250W to 400W PSMH fixtures in area, roadway, and security lighting applications, the versatile SAL LED area luminaires are available in 3 sizes/lumen packages, 4 distributions, and 7 mounting options. Salient Area LED Series Project Catalog Number Type Date Precision optics; 8 distributions Sleek architectural design Up to 60% energy savings vs. traditional HID sources Up to 60,000 hour operating life (L70) Available in 3000K, 4000K, and 5000K (standard) >70 CRI 0-10V dimming standard HOUSING / OPTICS Die cast aluminum housing available in bronze powder coat finish utilizes linear heat dissipating fins for superior cooling and durability. Housing has K0s on top and bottom for photocell or motion sensors. Hinged door secured by two allen head screws provides quick access to gasketed wiring compartment. LED modules are enclosed via gasketed, UV-stabilized polycarbonate precision lenses, available in IESNA Type II, III, IV, and Type V distributions. Available with factory-installed backlight shielding for 85% backlight reduction. LEDS SAL area lights utilize 48, 64, or 96 high power LEDs on conformal coated boards, and are 5-step binned for color consistency. SAL is available in 3 sizes and light levels (delivered): SALS: 13,000 mean lm (3 modules, 110W, 48 LEDs); SALM: 16,500 mean lm (4 modules, 140W, 64 LEDs); SALL: 23,500 mean lm (6 modules, 190W, 96 LEDs). 5000K (standard); consult factory for 3000K and 4000K. >70 CRI. LED operating life is up to 60,000 hours (L70). LEDs are LM-80 tested. ELECTRICAL Power supplies are V (U1) or V (U3), 0-10V dimmable. Power factor is >0.9. Power supplies are mounted in direct contact with aluminum housing for cooler operation and longer life. 110W units use 2100mA PSUs. 140W units use 2800mA PSUs. 190W units use 4200mA PSUs. 6kV integral surge protection and additonal 10kV inline field-replacable surge protection (standard). TEMPERATURE The SAL Series is suitable for use in operating temperatures from -31 F (-35 C) to 104 F (40 C). ACCESS / WIRING Power supplies are located in a separate compartment accessed via (2) captive 1/8 allen head screws. Top and bottom KOs provided for optional twist-lock photocell and motion sensors. MOUNTING Sold separately. Multiple mounting accessories are available for the SAL for pole or wall mounting. The SALS EPA is 1.56 ft 2 ; SALM EPA is 1.73 ft 2 ; SALL EPA is 2.08 ft 2. LISTINGS C-UL-US Listed wet location. 3G vibration rated for ANSI C high vibration applications DesignLights Consortium qualified. Title 24 compliant configurations available; contact factory. WARRANTY 5 year limited warranty. SALL 4 5/16 RoHS COMPLIANT SALM 17 / 19 / /4 Width TITLE 24 COMPLIANT AVAILABLE SALS 2 3/16 LED LED Salient Area LED Configuration SERIES SIZE* DISTRIBUTION COLOR TEMPERATURE VOLTAGE SAL S = 17 Small (12,500 lm) M = 19 Medium (16,500 lm) L = 23 Large (23,250 lm) 30 = 3000K** 40 = 4000K** 50 = 5000K (standard) 2 = Type II 3 = Type III 4 = Type IV 5 = Type V *See performance tables for actual performance **Contact factory for lead times U1 = Universal V; 0-10V Dimmable U3 = Universal V 0-10V Dimmable SALS with optional backlight shielding for reduced house-side illumination (factory installed) OPTIONS (x)p = Twist and Lock Photocell; designate voltage: 1 = 120V, 2 = 277V OS = Outdoor Motion Sensor SALBLS = Back Light Shielding ACCESSORIES AFSAL = Adjustable slip fitter, bronze RP3SAL = 3 Round pole mounting arm, bronze RP4SAL = 4 Round pole mounting arm, bronze RP5SAL = 5 Round pole mounting arm, bronze SPSAL = Square pole (3, 4, and 5 ) mounting arm, bronze TASAL = Horizontal tenon mount 2 IP, OD, bronze WMPSAL = Wall mount plate, bronze FOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE REV A (800)

26 Technical Specifications Performance Data Salient Area LED Series Model SALS (17 ) SALM (19 ) SALL (23 ) Equivalent 250W PSMH 320W PSMH 400W PSMH IES Distribution Light Output Efficacy Input Power Drive BUG Rating Current B U G Type II 12,942 lm lm/w Type III 11,756 lm lm/w W 2100 ma Type IV 13,652 lm lm/w Type V 13,931 lm lm/w Type II 17,048 lm lm/w Type III 16,371 lm lm/w W 2800 ma Type IV 17,853 lm lm/w Type V 18,831 lm lm/w Type II 22,862 lm lm/w Type III 24,646 lm lm/w W 4000 ma Type IV 23,250 lm lm/w Type V 25,855 lm lm/w * Delivered lumens ** Consult a lighting engineer to meet specific requirements Color Temperature 5000K Operating Life (L70) 60,000 hrs Operating Temperature -31 F (-35 C) to 104 F (40 C) Mounting Accessories SPSAL Square pole arm for 3, 4, and 5 square poles Bronze finish RP3SAL 3 Round pole arm Bronze finish RP4SAL 4 Round pole arm Bronze finish RP5SAL 5 Round pole arm Bronze finish AFSAL Adjustable slip fitter Bronze finish TASAL Horizontal tenon mount, 2 IP, OD Bronze finish WMPSAL Wall mount plate Bronze finish Options (factory installed) SALBLS Back Light Shielding Steel shield Black finish FOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE REV A (800)

27 Technical Specifications Dimensions Salient Area LED Series 2 3/4 10 1/4" 2 3/4 10 1/4" 4 5/16" 2 3/16" 4 5/16" 2 3/16" 17 1/2" SALS 19 1/2" SALM 2 3/4 10 1/4" 4 5/16" 2 3/16" 23 1/2" SALL 1" 2" SALS/M/L FOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE REV A (800)

28 Technical Specifications Photometric Data Luminaire Data SALS 110W 5000K Type IV, Medium Catalog Number SALS450U1 Lab Test# GZE C (#) Power Supply (1) Constant Current 2100mA # LED 48 white LEDs Color Temperature 5000K Input Watts 110W Delivered Lumens 13,652 Operating Life 60,000 hrs. (L70) Fixture Efficacy lm/w Luminaire Classification System LCS Lumens Luminaire % FL (0-30 Degrees) % FM (30-60 Degrees) % FH (60-80 Degrees) % FVH (80-90 Degrees) % BL (0-30 Degrees) % BM (30-60 Degrees) % BH (60-80 Degrees) % BVH (80-90 Degrees) % UL ( Degrees) % UH ( Degrees) % Total % BUG Rating B3 U0 G3 Salient Area LED Series Polar Plot UH UL BVH BH UH UL FVH FH V 60 BM FM 60 H BL FL BACK LIGHT FORWARD LIGHT 30 BACK 30 FRONT Photometric Data Luminaire Data SALM 140W 5000K Type IV, Medium Catalog Number SALM450U1 Lab Test# GZE G (#) Power Supply (1) Constant Current 2100mA # LED 96 white LEDs Color Temperature 5000K Input Watts Delivered Lumens 17,853 Operating Life 60,000 hrs. (L70) Fixture Efficacy lm/w IES BUG ratings (backlight, uplight, glare) Per IES TM Luminaire Classification System Lumens Luminaire % FL (0-30 Degrees) % FM (30-60 Degrees) % FH (60-80 Degrees) % FVH (80-90 Degrees) % BL (0-30 Degrees) % BM (30-60 Degrees) % BH (60-80 Degrees) % BVH (80-90 Degrees) % UL ( Degrees) % UH ( Degrees) % Total 17, % BUG Rating B3 U0 G3 Polar Plot UH UL BVH BH UH UL FVH FH V 60 BM FM 60 H BL FL BACK LIGHT FORWARD LIGHT 30 BACK 30 FRONT FOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE REV A (800)

29 Technical Specifications Photometric Data Luminaire Data SALL 110W 5000K Type II, Medium Catalog Number SALL450U1 Lab Test# GZE K (#) Power Supply (1) Constant Current 2100mA # LED 96 white LEDs Color Temperature 5000K Input Watts Delivered Lumens 22,862 Operating Life 60,000 hrs. (L70) Fixture Efficacy lm/w IES BUG ratings (backlight, uplight, glare) Per IES TM Luminaire Classification System Lumens Luminaire % FL (0-30 Degrees) % FM (30-60 Degrees) % FH (60-80 Degrees) % FVH (80-90 Degrees) % BL (0-30 Degrees) % BM (30-60 Degrees) % BH (60-80 Degrees) % BVH (80-90 Degrees) % UL ( Degrees) % UH ( Degrees) % Total 22, % BUG Rating B3 U0 G3 Salient Area LED Series Polar Plot UH UL BVH BH UH UL FVH FH BM FM 60 V H BL FL BACK LIGHT FORWARD LIGHT 30 BACK 30 FRONT FOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE REV A (800)

30 Technical Specifications VISOR TM led wallpack Visor compact architectural LED wallpacks replace up to 250W pulse start metal halide wall-mounted fixtures in perimeter, security, and entrance way applications while consuming up to 85% less energy and operating for 100,000 hours (L70). The Visor series is designed for typical mounting heights of up to 20 feet and up to 6:1 space-to-mounting height ratio; illuminating applications using fewer fixtures. Visor Compact Architectural LED Wallpack Project Catalog Number Type Date Energy efficient up to 85% energy savings vs. HID 100,000 hour operating life (L70) for labor and material savings Precision optics, requiring fewer fixtures 5000K CCT >70 CRI Instant on, zero restrike IP65 rated C-UL-US Listed, Wet Location, DesignLights TM Consortium Qualified 5 Year Limited Warranty HOUSING Die-cast aluminum housing in bronze, black, or white powder coat finish in Visor19 & 22 only. Visor is standard in bronze finish. Thermally efficient housing with integrated heat sink fins provides for cooler operation and maximum LED operating life. Weatherproof EVA gasketing seals out contaminants. OPTICS Precision NEMA Type III acrylic. Cut-off light distribution reduces light trespass and is Dark Sky compliant. LEDS Available in 4 light levels (delivered): 1354 lumens (17.39W), 1687 lumens (22.11W) 2587 lumens (28.96W) and 3749 lumens (43.84W) at 5000K CCT; >70CRI. LEDs are LM-80 tested. Operating life is 100,000 hours (L70). Light engines consist of 7, 9, 12 or 18 LED multi-chip packages mounted to a conformal coated metal core PCB board. ELECTRICAL LED power supply V, 0-10V dimming standard. Power factor is >0.9. Photocell models are 120V only. Power supply is mounted in direct contact with aluminum housing for cooler operation and longer life. Power supply output current is 700mA. Visor series is designed to operate in temperatures of -40 F (-40 C) to 113 F (45 C). ACCESS / WIRING Quick mount back plate provides for easy installation and includes a hook to hold fixture during wiring. Housing includes two threaded and plugged ½ conduit entry points. Mounts over 4 recessed junction box or conduit feed. MOUNTING The recommended mounting height of the Visor LED wallpacks is 8ft. to 20ft. with up to 6:1 spacing to mounting height ratio. Fixtures are designed to be installed in the downward facing position only. LISTINGS C-UL-US Listed wet location, IP65, DesignLights TM Consortium Qualified. WARRANTY 5 year limited warranty. *VISOR30U1 Shown 5 5/ / /32 VISOR19 & / / /64 VISOR30 & 44 RoHS COMPLIANT LED LED Visor Configuration Information SERIES INPUT POWER* VOLTAGE OPTIONS** VISOR 19 = 19W 22 = 22W 30 = 30W 44 = 44W U1 = Universal V BK = Black finish WT = White finish 1B = 120V Button Photocell * Nominal. See performance data for actual input power. **Bronze finish standard. Three finishes available in Visor 19 & 22. Visor 30 & 44 only available in Bronze finish. FOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE REV I (800)

31 Technical Specifications Dimensions Visor Compact Architectural LED Wallpack VISOR19 & /32 5 1/8 5 5/16 5 5/ / /32 VISOR30 & /16 5 5/16 6 9/16 6 9/ / /64 Performance Data Model Input Power Efficacy (lm/w) Light Output* Mounting Ht.** Equivalent HID** Operating Temperature DLC 2.0 VISOR19U W lm 8' 12' 50W PSMH to 70W PSMH -40 F (-40 C) to 113 F (45 C) Yes VISOR22U W lm 8' 12' 70W PSMH to 100W PSMH -40 F (-40 C) to 113 F (45 C) Yes VISOR30U W lm 12' 15' 150W PSMH to 175W PSMH -40 F (-40 C) to 113 F (45 C) Yes VISOR44U W lm 15' 20' 175W PSMH to 250W PSMH -40 F (-40 C) to 113 F (45 C) Yes * Delivered lumens ** Consult a lighting engineer to meet specific requirements FOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE REV I (800)

32 Technical Specifications Photometric Data Luminaire Data Aluminum housing / heatsink, clear acrylic lens enclosure Catalog Number VISOR19U1 Lab Test# (#) Power Supply (1) Constant Current 700mA # LED 7 Color Temperature 5000K Input Watts Delivered Lumens 1354 Operating Life 100,000 hrs. (L70) Fixture Efficacy 77.8 lm/w Visor Compact Architectural LED Wallpack Zonal Lumen Summary (Nominal; Total Fixture Lumens 1354) Forward Light % Total Fixture Lumens Lumens Forward Light Lumens 84.3% Forward Low Zone (0 to 30 Degrees) 6.8% 92.1 Forward Mid Zone (30 to 60 Degrees) 35.2% Forward High Zone (60 to 80 Degrees) 41.0% Forward Very High Zone (80 to 90 Degrees) 1.3% 17.6 Back Light % Total Fixture Lumens Lumens Back Light Lumens 15.7% Back Light Low Zone (0 To 30 Degrees) 3.8% 54.5 Back Light Mid Zone (30 To 60 Degrees) 7.1% 96.1 Back Light High Zone (60 To 80 Degrees) 4.4% 59.6 Back Light Very High Zone (80 To 90 Degrees) 0.3% 4.1 UpLight % Total Fixture Lumens Lumens UpLight Lumens 0.0% 0.0 UpLight Low Zone (90 To 100 Degrees) 0.0% 0.0 UpLight High Zone (100 To 180 Degrees) 0.0% 0.0 Footcandle Plot Horizontal Footcandles Mounting Height Scale: 1 Inch = 20 Ft. Light Loss Factor = 0.90 Lumens Per Lamp = N.A. (absolute photometry) Luminaire Lumens = 1355 Mounting Height = Ft Maximum Calculated Value = 1.73 Fc Arrangement: Single Distance IES BUG ratings (backlight, uplight, glare) Per IES TM VISOR19U1 IES BUG Rating: B0 U0 G1 Lumens Secondary Solid Angle Rating Back Light BH (60-80 Degrees) 60.2 B 0 BM (30-60 Degrees) 96.4 B 0 BL (0-30 Degrees) 51.6 B 0 UpLight UH ( Degrees) 0.0 U 0 UL ( Degrees) 0.0 U 0 Glare Light FVH (80-90 Degrees) 17.2 G 1 BVH (80-90 Degrees) 4.3 G 0 FH (60-80 Degrees) G 0 BH (60-80 Degrees) 60.2 G UH UL BVH BH 60 BACK LIGHT 180 UH UL FVH FH BM FM 60 BL FL FORWARD LIGHT BACK FRONT Flux distribution based on IESNA Luminaire Classification System Illustration depicts zone classification. See tables for fixture performance. FOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE REV I (800)

33 Technical Specifications Photometric Data Luminaire Data Aluminum housing / heatsink, clear acrylic lens enclosure Catalog Number VISOR22U1 Lab Test# (#) Power Supply (1) Constant Current 700mA # LED 9 Color Temperature 5000K Input Watts Delivered Lumens 1687 Operating Life 100,000 hrs. (L70) Fixture Efficacy 76.3 lm/w Visor Compact Architectural LED Wallpack Zonal Lumen Summary (Nominal; Total Fixture Lumens 1687) Forward Light % Total Fixture Lumens Lumens Forward Light Lumens 82.7% Forward Low Zone (0 to 30 Degrees) 7.0% Forward Mid Zone (30 to 60 Degrees) 37.2% Forward High Zone (60 to 80 Degrees) 37.3% Forward Very High Zone (80 to 90 Degrees) 1.2% 20.2 Back Light % Total Fixture Lumens Lumens Back Light Lumens 17.3% Back Light Low Zone (0 To 30 Degrees) 3.9% 65.8 Back Light Mid Zone (30 To 60 Degrees) 8.3% Back Light High Zone (60 To 80 Degrees) 4.7% 79.3 Back Light Very High Zone (80 To 90 Degrees) 0.4% 6.7 UpLight % Total Fixture Lumens Lumens UpLight Lumens 0.0% 0.0 UpLight Low Zone (90 To 100 Degrees) 0.0% 0.0 UpLight High Zone (100 To 180 Degrees) 0.0% 0.0 Footcandle Plot Horizontal Footcandles Mounting Height Distance Scale: 1 Inch = 10 Ft. Light Loss Factor = 0.90 Lumens Per Lamp = N.A. (absolute photometry) Luminaire Lumens = 1686 Mounting Height = Ft Maximum Calculated Value = 2.24 Fc Arrangement: Single IES BUG ratings (backlight, uplight, glare) Per IES TM VISOR22U1 IES BUG Rating: B0 U0 G1 Lumens Secondary Solid Angle Rating Back Light BH (60-80 Degrees) 79.5 B 0 BM (30-60 Degrees) B 0 BL (0-30 Degrees) 65.7 B 0 UpLight UH ( Degrees) 0.0 U 0 UL ( Degrees) 0.0 U 0 Glare Light FVH (80-90 Degrees) 19.6 G 1 BVH (80-90 Degrees) 6.4 G 0 FH (60-80 Degrees) G 0 BH (60-80 Degrees) 79.5 G UH UL BVH BH 60 BACK LIGHT 180 UH UL FVH FH BM FM 60 BL FL FORWARD LIGHT BACK FRONT Flux distribution based on IESNA Luminaire Classification System Illustration depicts zone classification. See tables for fixture performance. FOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE REV I (800)

34 Technical Specifications Photometric Data Luminaire Data Aluminum housing / heatsink, clear acrylic lens enclosure Catalog Number VISOR30U1 Lab Test# (#) Power Supply (1) Constant Current 700mA # LED 12 Color Temperature 5000K Input Watts Delivered Lumens 2587 Operating Life 100,000 hrs. (L70) Fixture Efficacy 89.2 lm/w Visor Compact Architectural LED Wallpack Zonal Lumen Summary (Nominal; Total Fixture Lumens 2587) Forward Light % Total Fixture Lumens Lumens Forward Light Lumens 80.2% Forward Low Zone (0 to 30 Degrees) 7.9% Forward Mid Zone (30 to 60 Degrees) 31.7% Forward High Zone (60 to 80 Degrees) 38.3% Forward Very High Zone (80 to 90 Degrees) 2.3% 59.5 Back Light % Total Fixture Lumens Lumens Back Light Lumens 19.8% Back Light Low Zone (0 To 30 Degrees) 5.7% Back Light Mid Zone (30 To 60 Degrees) 9.2% Back Light High Zone (60 To 80 Degrees) 4.4% Back Light Very High Zone (80 To 90 Degrees) 0.5% 12.9 UpLight % Total Fixture Lumens Lumens UpLight Lumens 0.0% 0.0 UpLight Low Zone (90 To 100 Degrees) 0.0% 0.0 UpLight High Zone (100 To 180 Degrees) 0.0% 0.0 Footcandle Plot Horizontal Footcandles Mounting Height Scale: 1 Inch = 20 Ft. Light Loss Factor = 0.90 Lumens Per Lamp = N.A. (absolute photometry) Luminaire Lumens = 2590 Mounting Height = Ft Maximum Calculated Value = 2.75 Fc Arrangement: Single Distance IES BUG ratings (backlight, uplight, glare) Per IES TM VISOR30U1 IES BUG Rating: B1 U0 G1 Lumens Secondary Solid Angle Rating Back Light BH (60-80 Degrees) B 1 BM (30-60 Degrees) B 1 BL (0-30 Degrees) B 1 UpLight UH ( Degrees) 0.0 U 0 UL ( Degrees) 0.0 U 0 Glare Light FVH (80-90 Degrees) 60.0 G 1 BVH (80-90 Degrees) 12.7 G 1 FH (60-80 Degrees) G 1 BH (60-80 Degrees) G UH UL BVH BH 60 BACK LIGHT 180 UH UL FVH FH BM FM 60 BL FL FORWARD LIGHT BACK FRONT Flux distribution based on IESNA Luminaire Classification System Illustration depicts zone classification. See tables for fixture performance. FOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE REV I (800)

35 Technical Specifications Photometric Data Luminaire Data Aluminum housing / heatsink, clear acrylic lens enclosure Catalog Number VISOR44U1 Lab Test# (#) Power Supply (2) Constant Current 700mA # LED 18 Color Temperature 5000K Input Watts Delivered Lumens 3749 Operating Life 100,000 hrs. (L70) Fixture Efficacy 85.6 lm/w Visor Compact Architectural LED Wallpack Zonal Lumen Summary (Nominal; Total Fixture Lumens 3749) Forward Light % Total Fixture Lumens Lumens Forward Light Lumens 82.2% Forward Low Zone (0 to 30 Degrees) 7.2% Forward Mid Zone (30 to 60 Degrees) 32.0% Forward High Zone (60 to 80 Degrees) 40.8% Forward Very High Zone (80 to 90 Degrees) 2.2% 82.5 Back Light % Total Fixture Lumens Lumens Back Light Lumens 17.8% Back Light Low Zone (0 To 30 Degrees) 4.6% Back Light Mid Zone (30 To 60 Degrees) 8.2% Back Light High Zone (60 To 80 Degrees) 4.5% Back Light Very High Zone (80 To 90 Degrees) 0.4% 15.0 UpLight % Total Fixture Lumens Lumens UpLight Lumens 0.0% 0.0 UpLight Low Zone (90 To 100 Degrees) 0.0% 0.1 UpLight High Zone (100 To 180 Degrees) 0.0% 0.0 Footcandle Plot Horizontal Footcandles Mounting Height Distance Scale: 1 Inch = 20 Ft. Light Loss Factor = 0.90 Lumens Per Lamp = N.A. (absolute photometry) Luminaire Lumens = 3756 Mounting Height = Ft Maximum Calculated Value = 1.83 Fc Arrangement: Single IES BUG ratings (backlight, uplight, glare) Per IES TM VISOR44U1 IES BUG Rating: B1 U1 G1 Lumens Secondary Solid Angle Rating Back Light BH (60-80 Degrees) B 1 BM (30-60 Degrees) B 1 BL (0-30 Degrees) B 1 UpLight UH ( Degrees) 0.0 U 0 UL ( Degrees) 0.1 U 1 Glare Light FVH (80-90 Degrees) 82.1 G 1 BVH (80-90 Degrees) 15.7 G 1 FH (60-80 Degrees) G 1 BH (60-80 Degrees) G UH UL BVH BH 60 BACK LIGHT 180 UH UL FVH FH BM FM 60 BL FL FORWARD LIGHT BACK FRONT Flux distribution based on IESNA Luminaire Classification System Illustration depicts zone classification. See tables for fixture performance. FOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE REV I (800)