Epoxy coating (heeavy duty) of ductile iron fittings and accessories requirements and testing method

International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. CD registered Period from 01 January to 31 January 2014 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. TC 5 18468 TC 10 8887-1 TC 20 16709 17546 TC 21 6182-14 TC 22 3536 15082 17449 TC 39 ISO/DTR 17529 TC 43 Ferrous metal pipes and metallic fittings Epoxy coating (heeavy duty) of ductile iron fittings and accessories requirements and testing method Technical product documentation Design and documentation for manufacture, assembly, disassembly and end-of-life processing (MADE) Part 1: General concepts, process and requirements Aircraft and space vehicles Realtime solar activity and space environment information for spacecraft operation Space systems Lithium ion battery for space vehicles Design and verification requirements Equipment for fire protection and fire fighting Fire protection Automatic sprinkler systems Part 14: Requirements and test methods for water spray nozzles Road vehicles Road vehicles Safety glazing materials Vocabulary Road vehicles Tests for rigid plastic safety glazing materials Road vehicles Safety glazing materials Test methods for properties of electrically heated glazing Machine tools Machine tools Risk assessment for electro discharge machines Acoustics

7029 4869-1 TC 58 18119 TC 68 13491-1 TC 84 7864 9626 TC 85 ISO/DTS 18090-1 TC 106 ISO/DTS 11405 17254 3964 TC 121 5366 18562-1 18562-2 18562-3 18562-4 TC 147 18220 TC 156 Acoustics Statistical distribution of hearing thresholds as a function of age Acoustics Hearing protectors Part 1: Subjective method for the measurement of sound attenuation Gas cylinders Gas cylinders - Seamless steel and aluminium-alloy gas cylinders --- Periodic inspection and testing Financial services Banking Secure cryptographic devices (retail) Part 1: Concepts, requirements and evaluation methods Devices for administration of medicinal products and intravascular catheters Sterile hypodermic needles for single use Stainless steel needle tubing for the manufacture of medical devices Nuclear energy, nuclear technologies, and radiological protection Radiological protection - Characteristics of reference pulsed radiation Part 1: Photon radiation Dentistry Dental materials Testing of adhesion to tooth structure Dentistry Springs for use in orthodontics Dentistry Coupling dimensions for handpieces Anaesthetic and respiratory equipment Anaesthetic and respiratory equipment Tracheostomy tubes Biocompatibility evaluation of respiratory gas pathways in healthcare applications Part 1: Evaluation and testing within a risk management process Biocompatibility evaluation of respiratory gas pathways in healthcare applications Part 2: Tests for emissions of particulate matter Biocompatibility evaluation of respiratory gas pathways in healthcare applications Part 3: Tests for emissions of volatile organic compounds (VOCs) Biocompatibility evaluation of respiratory gas pathways in healthcare applications Part 4: Tests for leachables in condensate Water quality Water quality Larval development test with the harpacticoid copepod Nitocra spinipes Corrosion of metals and alloys Corrosion of metals and alloys Corrosion test for intergranular corrosion susceptibility of low

18298 Cr ultrapure ferritic stainless steels TC 160 19597 TC 172 12853 19045 TC 188 14895 TC 194 10993-5 TC 201 ISO/DTS 18507 TC 215 ISO/DTR 19231 IEC/DTR 80001-2-7 TC 227 19690 TC 229 ISO/DTS 17466 ISO/DTS 80004-9 ISO/DTS 80004-10 TC 247 18641 JTC 1 ISO/IEC CD 7812-1 ISO/IEC CD 7812-2 Glass in building Glass in building Determination of emissivity Optics and photonics Microscopes Information provided to the user Ophthalmic optics Contact lens care products Method for evaluating Acanthamoeba encystment by contact lens care products Small craft Small craft Liquid-fuelled galley stoves Biological evaluation of medical devices Biological evaluation of medical devices Part 5: Tests for in vitro cytotoxicity Surface chemical analysis Surface Chemical Analysis - Technical Specification for the use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis Health informatics Health informatics Survey of mhealth projects in low to middle income countries (LMIC) Application of risk management for IT-networks incorporating medical devices Part 2-7: Application guidance Guidance for Healthcare Delivery Organizations (HDOs) on how to selfassess their conformance with IEC 80001-1 Springs Disc springs Calculation Technical specifications Nanotechnologies Use of UV-Vis absorption spectroscopy in the characterization of cadmium chacolgate semiconductor Nanoparticles (Quantum dots) Nanotechnologies Vocabulary Part 9: Nano-enabled electrotechnical products and systems Nanotechnologies Vocabulary Part 10: Nano-enabled photonic components and systems Fraud countermeasures and controls Fraud Countermeasures and Control Terminology Information technology Identification cards Identification of issuers Part 1: Numbering system Identification cards Identification of issuers Part 2: Application and registration procedures

ISO/IEC CD 19763-1 ISO/IEC CD 18384-2 Information technology Metamodel framework for interoperability (MFI) Part 1: Reference model Specification of Information Technology Distributed Application Platforms and Services Reference Architecture for Service Oriented Architecture Part 2: Reference Architecture for SOA Solutions DIS circulated Period from 01 January to 31 January 2014 These documents have obtained substantial support within the appropriate ISO technical committee. They have been submitted to the ISO member bodies for voting by the date shown. Available in English only Vote terminates PC 253 ISO/DIS 16075-1 ISO/DIS 16075-2 ISO/DIS 16075-3 PC 271 Treated wastewater re-use for irrigation Guidelines for Treated Wastewater Use for Irrigation Projects Part 1: The Basis of a Reuse Project for Irrigation (Revision of 16075-2) Guidelines for Treated Wastewater Use for Irrigation Projects Part 2: Development of the project Guidelines for Treated Wastewater Use for Irrigation Projects Part 3: Components of a reuse project for irrigation Compliance management systems 2014-04-07 2014-04-07 2014-04-07 ISO/DIS 19600 Compliance management systems Guidelines 2014-04-22 REMCO Committee on reference materials ISO/DGuide 33 Reference materials Good practice in using reference materials 2014-05-22 (Revision of ISO Guide 32:1997, ISO Guide 33:2000) TC 4 Rolling bearings ISO/DIS 3245 TC 6 Rolling bearings Needle roller bearings, drawn cup without inner ring Geometrical product specifications (GPS), boundary dimensions and tolerances (Revision of ISO 3245:2007) Paper, board and pulps 2014-03-10 ISO/DIS 16260 Paper and board - Determination of internal bond strength 2014-04-16 TC 8 ISO/DIS 18611-1 ISO/DIS 18611-2 Ships and marine technology Ships and marine technology Marine NOx reduction agent AUS 40 Part 1: Quality requirements Ships and marine technology Marine NOx reduction agent AUS 40 Part 2: Test methods

ISO/DIS 18611-3 Ships and marine technology Marine NOx reduction agent AUS 40 Part 3: Handling, transportation and storage ISO/DIS 15016 TC 17 Ships and marine technology Guidelines for the assessment of speed and power performance by analysis of speed trial data (Revision of ISO 15016:2002) Steel 2014-04-07 ISO/DIS 11949 Cold-reduced electrolytic tinplate (Revision of ISO 11949:1995) ISO/DIS 11950 Cold-reduced electrolytic chromium/chromium oxide-coated steel (Revision of ISO 11950:1995) ISO/DIS 11951 TC 20 ISO/DIS 16130 TC 23 ISO/DIS 24253-1 ISO/DIS 24253-2 TC 28 ISO/DIS 20844 TC 29 ISO/DIS 2725-1 ISO/DIS 2725-2 ISO/DIS 2725-3 TC 34 ISO/DIS 27971 ISO/DIS 17604 Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel (Revision of ISO 11951:1995) Aircraft and space vehicles Aerospace series Dynamic testing of the locking behaviour of bolted connections under transverse loading conditions (vibration test) Tractors and machinery for agriculture and forestry Crop protection equipment Spray deposit test for field crop Part 1: Measurement in a horizontal plane Crop protection equipment Spray deposit test for field crop Part 2: Measurement in a crop Petroleum products and lubricants Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (Revision of ISO 20844:2004) Small tools Assembly tools for screws and nuts Square drive sockets Part 1: Hand-operated sockets (Revision of ISO 2725-1:2007) Assembly tools for screws and nuts Square drive sockets Part 2: Machine-operated sockets ("impact") (Revision of ISO 2725-2:2007) Assembly tools for screws and nuts Square drive sockets Part 3: Machine-operated sockets ("non-impact") (Revision of ISO 2725-3:2001) Food products Cereals and cereal products Common wheat (Triticum aestivum L.) Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (Revision of ISO 27971:2008) Microbiology of food and animal feed Carcass sampling for microbiological analysis (Revision of ISO 17604:2003, ISO 17604:2003/Amd 1:2009) 2014-04-30 2014-04-21 2014-04-21 2014-04-21

ISO/DIS 12966-4 TC 38 Animal and vegetable fats and oils Determination of methyl esters of fatty acids Part 4: Capillary gas chromatographic method (Revision of ISO 5508:1990, ISO 15304:2002) Textiles ISO/DIS 17299-4 ISO/DIS 3074 Textiles Determination of deodorant property Part 4: Condensation sampling analysis Wool Determination of dichloromethane-soluble matter in combed sliver (Revision of ISO 3074:1975) ISO/DIS 18068 Cotton fibers Test method for sugar content Spectrophotometry ISO/DIS 12947-2 TC 39 ISO/DIS 230-7 ISO/DIS 13041-5 Textiles Determination of the abrasion resistance of fabrics by the Martindale method Part 2: Determination of specimen breakdown (Revision of ISO 12947-2:1998, ISO 12947-2:1998/Cor 1:2002) Machine tools Machine tools Test code for machine tools Part 7: Geometric accuracy of axes of rotation (Revision of ISO 230-7:2006) Test conditions for numerically controlled turning machines and turning centres Part 5: Accuracy of feeds, speeds and interpolations (Revision of ISO 13041-5:2006) 2014-04-28 ISO/DIS 18217 Safety of woodworking machines Edge-banding machines fed chain(s) ISO/DIS 16089 Machine tools Safety Stationary grinding machines ISO/DIS 16093 Machine tools Safety Sawing machines for cold metal TC 43 ISO/DIS 1996-1 Acoustics Acoustics Description, measurement and assessment of environmental noise Part 1: Basic quantities and assessment procedures (Revision of ISO 1996-1:2003) 2014-04-28 ISO/DIS 16254 Acoustics Measurement of minimum noise emitted by road vehicles 2014-04-28 ISO 17497-1:2004/DAmd 1 Acoustics Sound-scattering properties of surfaces Part 1: Measurement of the random-incidence scattering coefficient in a reverberation room Amendment 1 TC 44 Welding and allied processes ISO/DIS 3834-5 ISO/DIS 15614-8 ISO/DIS 9454-1 TC 45 Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (Revision of ISO 3834-5:2005, ISO 3834-5:2005/Cor 1:2007) Specification and qualification of welding procedures for metallic materials Welding procedure test Part 8: Welding of tubes to tube-plate joints (Revision of ISO 15614-8:2002) Soft soldering fluxes Classification and requirements Part 1: Classification, labelling and packaging (Revision of ISO 9454-1:1990) Rubber and rubber products

ISO/DIS 18766 Rubber, vulcanized or thermoplastic Low temperature testing General introduction and guide 2014-04-21 ISO/DIS 19242 Rubber Determination of total sulfur content by ion chromatography 2014-04-21 TC 58 Gas cylinders ISO/DIS 16964 Gas cylinders Flexible hoses assemblies Specification and testing ISO/DIS 17871 Gas cylinders Quick opening valves Specification and type testing TC 59 ISO/DIS 12006-2 TC 61 ISO/DIS 11357-7 ISO/DIS 4892-1 TC 68 Buildings and civil engineering works Building construction Organization of information about construction works Part 2: Framework for classification (Revision of ISO 12006-2:2001) Plastics Plastics Differential scanning calorimetry (DSC) Part 7: Determination of crystallization kinetics (Revision of ISO 11357-7:2002) Plastics Methods of exposure to laboratory light sources Part 1: General guidance (Revision of ISO 4892-1:1999) Financial services 2014-04-17 2014-07-01 2014-06-24 ISO 9564-1:2011/DAmd 1 Financial services Personal Identification Number (PIN) management and security Part 1: Basic principles and requirements for PINs in cardbased systems Amendment 1 2014-04-30 TC 69 Applications of statistical methods ISO/DIS 7870-6 TC 70 ISO/DIS 8178-5 TC 85 ISO/DIS 16637 TC 86 Statistical Methods in Process Management Control Charts Part 6: EWMA Control Charts Internal combustion engines Reciprocating internal combustion engines Exhaust emission measurement Part 5: Test fuels (Revision of ISO 8178-5:2008) Nuclear energy, nuclear technologies, and radiological protection Radiological protection Monitoring and internal dosimetry for staff exposed to medical radionuclides as unsealed sources Refrigeration and air-conditioning 2014-04-28 2014-04-16 ISO/DIS 23953-1 Refrigerated display cabinets Part 1: Vocabulary (Revision of ISO 23953-1:2005, ISO 23953-1:2005/Amd 1:2012) TC 91 Surface active agents ISO/DIS 17280 TC 92 ISO/DIS 9705-1 Surface active agents Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography Fire safety Reaction to fire tests Room corner test for wall and ceiling lining products Part 1: Test method for a small room configuration 2014-04-28

(Revision of ISO 9705:1993, ISO 9705:1993/Cor 1:1993) TC 94 ISO/DIS 11999-5 ISO/DIS 11999-6 TC 96 Personal safety -- Protective clothing and equipment PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 5: Helmets PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 6: Footwear Cranes 2014-04-29 2014-04-29 ISO/DIS 16715.2 Cranes Hand signals used with cranes 2014-03-28 TC 106 ISO/DIS 22674 Dentistry Dentistry Metallic materials for fixed and removable restorations and appliances (Revision of ISO 22674:2006) ISO 12836:2012/DAmd 1 Dentistry Digitizing devices for CAD/CAM systems for indirect dental restorations Test methods for assessing accuracy Amendment 1 TC 107 Metallic and other inorganic coatings ISO/DIS 27307 TC 108 ISO/DIS 7626-2 ISO/DIS 13379-2 TC 110 ISO/DIS 11525-2 TC 121 ISO/DIS 23747 TC 130 Evaluation of adhesion/cohesion of plasma sprayed ceramic coatings by scratch testing Mechanical vibration, shock and condition monitoring Mechanical vibration and shock Experimental determination of mechanical mobility Part 2: Measurements using single-point translation excitation with an attached vibration exciter (Revision of ISO 7626-2:1990) Condition monitoring and diagnostics of machines Data interpretation and diagnostics techniques Part 2: Data-driven applications Industrial trucks Rough-terrain trucks - User requirements Part 2: Slewing variablereach trucks Anaesthetic and respiratory equipment Anaesthetic and respiratory equipment Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (Revision of ISO 23747:2007) Graphic technology 2014-04-28 2014-04-23 2014-06-24 ISO/DIS 12646 Graphic technology Displays for colour proofing Characteristics 2014-04-28 (Revision of ISO 12646:2008, ISO 12646:2008/Amd 1:2010) TC 134 Fertilizers and soil conditioners ISO/DIS 17322 Fertilizers and soil conditioners Sulfur Coated Urea (SCU) Analytical methods

ISO/DIS 17323 TC 146 Fertilizers and soil conditioners Sulfur Coated Urea (SCU) General requirements Air quality ISO/DIS 17621 ISO/DIS 16000-20 TC 147 ISO/DIS 9697 TC 150 ISO/DIS 8828 TC 153 ISO/DIS 15848-1 ISO/DIS 15848-2 TC 160 ISO/DIS 1288-1 ISO/DIS 1288-2 ISO/DIS 1288-3 ISO/DIS 1288-4 ISO/DIS 1288-5 TC 163 ISO/DIS 16956 TC 172 Workplace atmospheres Short term detector tube measurement systems Requirements and test methods Indoor air Detection and enumeration of moulds Part 20: Determination of total spore count Water quality Water quality Measurement of gross beta activity in non-saline water Thick source method (Revision of ISO 9697:2008) Implants for surgery Implants for surgery Guidance on care and handling of orthopaedic implants (Revision of ISO 8828:1988) Valves Industrial valves Measurement, test and qualification procedures for fugitive emissions Part 1: Classification system and qualification procedures for type testing of valves (Revision of ISO 15848-1:2006) Industrial valves Measurement, test and qualification procedures for fugitive emissions Part 2: Production acceptance test of valves (Revision of ISO 15848-2:2006) Glass in building Glass in building Determination of the bending strength of glass Part 1: Fundamentals of testing glass (Revision of ISO/DIS 1288-1) Glass in building Determination of the bending strength of glass Part 2: Coaxial double-ring test on flat specimens with large test surface areas (Revision of ISO/DIS 1288-2) Glass in building Determination of the bending strength of glass Part 3: Test with specimen supported at two points (four-point bending) (Revision of ISO/DIS 1288-3) Glass in building Determination of the bending strength of glass Part 4: Testing of channel-shaped glass (Revision of ISO/DIS 1288-4) Glass in building Determination of the bending strength of glass Part 5: Coaxial double-ring test on flat specimens with small test surface areas (Revision of ISO/DIS 1288-5) Thermal performance and energy use in the built environment Thermal Performance in the Built Environment Determination of Air Flow Rate in Building Applications by Field Measuring Methods Optics and photonics 2014-04-29 2014-04-28 2014-04-20 2014-06-24 2014-06-24 2014-04-22

ISO 8624:2011/DAmd 1 Ophthalmic optics Spectacle frames Measuring system and terminology Amendment 1 ISO/DIS 10322-1 ISO/DIS 10322-2 ISO/DIS 13694 ISO/DIS 17901-1 ISO/DIS 17901-2 TC 173 ISO/DIS 16840-6 ISO/DIS 16840-10 TC 183 ISO/DIS 13547-1 ISO/DIS 13547-2 TC 195 ISO/DIS 13105-1 ISO/DIS 13105-2 TC 199 ISO/DIS 14122-4 TC 204 ISO/DIS 13185-2 TC 210 Ophthalmic optics Semi-finished spectacle lens blanks Part 1: Specifications for single-vision and multifocal lens blanks (Revision of ISO 10322-1:2006) Ophthalmic optics - Semi-finished spectacle lens blanks Part 2: Specifications for progressive-power and degressive-power lens blanks (Revision of ISO 10322-2:2006) Optics and optical instruments Lasers and laser-related equipment Test methods for laser beam power (energy) density distribution (Revision of ISO 13694:2000, ISO 13694:2000/Cor 1:2005) Optics and photonics Holography Part 1: Methods of measuring diffraction efficiency and associated optical characteristics of holograms Optics and photonics Holography Part 2: Methods for measurement of hologram recording characteristics Assistive products for persons with disability Wheelchair seating Part 6: Simulated use and determination of the changes in properties Seat cushions Wheelchair Resistance to ignition of non-integrated seat and back support cushions Part 10: Requirements and test methods Copper, lead, zinc and nickel ores and concentrates Copper, lead, zinc and nickel sulfide concentrates Determination of arsenic Part 1: Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method Copper, lead, zinc and nickel sulfide concentrates Determination of arsenic Part 2: Acid digestion and inductively-coupled plasma atomic emission spectrometric method Building construction machinery and equipment Building construction machinery and equipment Machinery for concrete surface floating and finishing Part 1: Terms and commercial specifications Building construction machinery and equipment Machinery for concrete surface floating and finishing Part 2: Safety requirements and verification Safety of machinery Safety of machinery Permanent means of access to machinery Part 4: Fixed ladders (Revision of ISO 14122-4:2004, ISO 14122-4:2004/Amd 1:2010) Intelligent transport systems Intelligent transport systems Vehicle interface for provisioning and support of ITS services Part 2: Unified gateway protocol (UGP) requirements and specification for vehicle ITS station gateway (V-ITS-SG) interface Quality management and corresponding 2014-07-01 2014-05-01 2014-05-01 2014-04-29 2014-04-23 2014-04-23 2014-04-15 2014-04-15 2014-04-28

IEC/DIS 80369-5 TC 215 ISO/DIS 16278 general aspects for medical devices Small-bore connectors for liquids and gases in healthcare applications Part 5: Connectors for limb cuff inflation applications Health informatics Health informatics Categorial structure for terminologies systems of human anatomy 2014-04-11 2014-07-01 ISO/DIS 17090-2 Health informatics Public key infrastructure Part 2: Certificate profile 2014-04-17 (Revision of ISO 17090-2:2008) TC 220 Cryogenic vessels ISO/DIS 21029-2.2 TC 226 ISO/DIS 18842 ISO/DIS 18843 TC 242 ISO/DIS 50004 ISO/DIS 50006 IULTCS ISO/DIS 19076 JTC 1 ISO/IEC DIS 17811-2 ISO/IEC DIS 17811-3 ISO/IEC DIS 17821 Cryogenic vessels Transportable vacuum insulated vessels of not more than 1 000 litres volume Part 2: Operational requirements (Revision of ISO 21029-2:2004) Materials for the production of primary aluminium Aluminium oxide primarily used for the production of aluminium Method for the determination of tapped and untapped density Aluminium oxide primarily used for the production of aluminium Method for the determination of flow time Energy Management Energy management systems Guidance for the implementation, maintenance and improvement of an energy management system Energy management systems Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI) General principles and guidance International Union of Leather Technologists and Chemists Societies Leather Measurement of leather surface Using electronic techniques Information technology Information Technology Device Control and Management Part 2: Specification of Device Control and Management Protocol Information Technology Device Control and Management Part 3: Specification of Reliable Message Delivery Protocol Information Technology Specification of Low Power Wireless Mesh Network over Channel-hopped TDMA Links 2014-04-24 2014-04-21 2014-04-21 2014-04-17 2014-04-17 2014-04-17 ISO/IEC 14763-2:2012/DAmd 1 Information technology Implementation and operation of customer premises cabling Part 2: Planning and installation Amendment 1 2014-04-22 ISO/IEC DIS 27018 Information technology Security techniques Code of practice for PII protection in public cloud acting as PII processors 2014-04-08 ISO/IEC DIS 27040 Information technology Security techniques Storage security 2014-04-07 ISO/IEC DIS 27041 Information technology Security techniques Guidance on assuring suitability and adequacy of incident investigative methods 2014-04-28 ISO/IEC DIS 27042 Information technology Security techniques Guidelines for the 2014-04-28

ISO/IEC DIS 27043 analysis and interpretation of digital evidence Information technology Security techniques Incident investigation principles and processes 2014-04-07 ISO/IEC 14496-12:2012/DAmd 3 Information technology Coding of audio-visual objects Part 12: ISO base media file format Amendment 3: Font streams and other improvements to file format ISO/IEC 15444-12:2012/DAmd 3 Information technology JPEG 2000 image coding system Part 12: ISO base media file format Amendment 3: Font streams and other improvements to file format ISO/IEC DIS 23001-7 Information technology MPEG systems technologies Part 7: Common encryption in ISO base media file format files (Revision of ISO/IEC 23001-7:2012) ISO/IEC 23002-4/DAmd 2 Information technology MPEG video technologies Part 4: Video tool library Amendment 2: FU and FN descriptions for HEVC 2014-04-25 ISO/IEC 23002-5:2013/DAmd 1 Information technology MPEG video technologies Part 5: Reconfigurable media coding conformance and reference software Amendment 1: Graphics tool library (GTL) reference software and conformance ISO/IEC 23007-3:2011/DAmd 1 Information technology Rich media user interfaces Part 3: Conformance and reference software Amendment 1: Conformance and reference software for widget extension and AUI 2014-04-07 ISO/IEC 23008-1/DAmd 1 Information technology High efficiency coding and media delivery in heterogeneous environments Part 1: MPEG media transport (MMT) Amendment 1: Additional technologies for MPEG Media Transport (MMT) ISO/IEC DIS 18000-4 ISO/IEC DIS 9995-11 ISO/IEC DIS 19788-4 Information technology Radio frequency identification for item management Part 4: Parameters for air interface communications at 2,45 GHz (Revision of ISO/IEC 18000-4:2008) Information technology Keyboard layouts for office systems Part 11: Functionality of dead keys and repertoires of characters entered by dead keys Information technology Learning, education and training Metadata for learning resources Part 4: Technical elements 2014-04-07 ISO/IEC DIS 38500 Information Technology governance of IT For the Organization (Revision of ISO/IEC 38500:2008) FDIS circulated Period from 01 January to 31 January 2014 These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown Available in English only Vote terminates TC 2 Fasteners

ISO/FDIS 4017 Hexagon head screws Product grades A and B (Revision of ISO 4017:2011) ISO/FDIS 10683 Fasteners Non-electrolytically applied zinc flake coatings (Revision of ISO 10683:2000) TC 4 Rolling bearings ISO/FDIS 199 ISO/FDIS 492 TC 6 Rolling bearings Thrust bearings Geometrical product specification (GPS) and tolerance values (Revision of ISO 199:2005) Rolling bearings Radial bearings Dimensional and geometrical tolerances (Revision of ISO 492:2002) Paper, board and pulps 2014-03-21 2014-03-21 ISO/FDIS 2759 Board Determination of bursting strength 2014-03-24 (Revision of ISO 2759:2001) ISO/FDIS 12625-7 ISO/FDIS 13820 TC 17 Tissue paper and tissue products Part 7: Determination of optical properties Measurement of brightness and colour with D65/10 (outdoor daylight) (Revision of ISO 12625-7:2007) Paper, board and corrugated fibreboard Description and calibration of compression-testing equipment (Revision of ISO 13820:1996) Steel ISO/FDIS 15510 Stainless steels Chemical composition (Revision of ISO 15510:2010) ISO/FDIS 16143-1 ISO/FDIS 16143-2 Stainless steels for general purposes Part 1: Corrosion-resistant flat products (Revision of ISO 16143-1:2004) Stainless steels for general purposes Part 2: Corrosion-resistant semifinished products, bars, rods and sections (Revision of ISO 16143-2:2004) 2014-03-29 2014-03-18 ISO/FDIS 16143-3 Stainless steels for general purposes Part 3: Wire 2014-03-18 (Revision of ISO 16143-3:2005) ISO/FDIS 4998 Continuous hot-dip zinc-coated carbon steel sheet of structural quality 2014-03-21 (Revision of ISO 4998:2011) TC 20 Aircraft and space vehicles ISO/FDIS 10788 Space systems Lunar simulants 2014-03-16 ISO/FDIS 17255 Space systems Programme management Statement of work 2014-03-23 TC 21 ISO/FDIS 6182-10 Equipment for fire protection and fire fighting Fire protection Automatic sprinkler systems Part 10: Requirements and test methods for domestic sprinklers (Revision of ISO 6182-10:2006) 2014-03-16 ISO/FDIS 7076-5 Fire protection Foam fire extinguishing systems Part 5: Compressed 2014-03-11

air foam equipment TC 22 ISO/FDIS 8820-9 ISO/FDIS 18542-2 ISO/FDIS 12405-3 Road vehicles Road vehicles Fuse-links Part 9: Fuse-links with shortened tabs (Type K) Road vehicles Standardized repair and maintenance information (RMI) terminology Part 2: Standardized process implementation requirements, Registration Authority Electrically propelled road vehicles Test specification for Lithium-ion traction battery packs and systems Part 3: Safety performance requirements 2014-03-07 ISO/FDIS 16380 Road Vehicles Blended Fuels Refuelling Connector TC 24 ISO/FDIS 9276-2 TC 29 Particle characterization including sieving Representation of results of particle size analysis Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (Revision of ISO 9276-2:2001) Small tools 2014-03-22 ISO/FDIS 16462 Cubic boron nitride inserts, tipped or solid Dimensions, types 2014-03-28 (Revision of ISO 16462:2004) ISO/FDIS 16463 Polycristalline diamond inserts, tipped Dimensions, types 2014-03-28 (Revision of ISO 16463:2004) TC 33 Refractories ISO/FDIS 16835 Refractory products Determination of thermal expansion 2014-03-07 TC 34 Food products ISO/FDIS 3493 Vanilla Vocabulary (Revision of ISO 3493:1999) ISO 8589:2007/FDAmd 1 Sensory analysis General guidance for the design of test rooms Amendment 1 2014-03-24 TC 35 Paints and varnishes ISO/FDIS 3233-2 TC 38 ISO/FDIS 16373-3 ISO/FDIS 15625 TC 43 ISO/FDIS 10844 Paints and varnishes Determination of the percentage volume of nonvolatile matter Part 2: Method using the determination of non-volatilematter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle Textiles Textiles Dyestuffs Part 3: Method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol) Protein fibres Electronic test method for defects and evenness of raw silk Acoustics Acoustics Specification of test tracks for measuring noise emitted by road vehicles and their tyres (Revision of ISO 10844:2011) 2014-03-25 2014-03-28

ISO/FDIS 11200 Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (Revision of ISO 11200:1995, ISO 11200:1995/Cor 1:1997) ISO/FDIS 12999-1 TC 45 ISO/FDIS 3994 Acoustics Determination and application of measurement uncertainties in building acoustics Part 1: Sound insulation (Revision of ISO 140-2:1991, ISO 140-2:1991/Cor 1:1993) Rubber and rubber products Plastics hoses Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials Specification (Revision of ISO 3994:2007) ISO/FDIS 6806 Rubber hoses and hose assemblies for use in oil burners Specification 2014-05-01 (Revision of ISO 6806:1992) ISO/FDIS 8029 TC 46 ISO/FDIS 28560-1 ISO/FDIS 28560-2 ISO/FDIS 28560-3 TC 54 Plastics hose General-purpose collapsible water hose, textile-reinforced Specification (Revision of ISO 8029:2007) Information and documentation Information and documentation RFID in libraries Part 1: Data elements and general guidelines for implementation (Revision of ISO 28560-1:2011) Information and documentation RFID in libraries Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962 (Revision of ISO 28560-2:2011) Information and documentation RFID in libraries Part 3: Fixed length encoding (Revision of ISO 28560-3:2011) Essential oils 2014-03-28 2014-03-28 2014-03-28 ISO/FDIS 16928 Essential oil of ginger [Zingiber officinale Roscoe] 2014-03-16 TC 60 Gears ISO/FDIS 14104 Gears Surface temper etch inspection after grinding, chemical method 2014-03-20 (Revision of ISO 14104:1995) TC 61 Plastics ISO 10350-1:2007/FDAmd 1 Plastics Acquisition and presentation of comparable single-point data Part 1: Moulding materials Amendment 1 2014-03-31 ISO/FDIS 15985 ISO/FDIS 17223 ISO/FDIS 16365-1 ISO/FDIS 16365-2 Plastics Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions Method by analysis of released biogas (Revision of ISO 15985:2004, ISO 15985:2004/Cor 1:2007) Plastics Determination of yellowness index and change in yellowness index Plastics Thermoplastic polyurethanes for moulding and extrusion Part 1: Designation system and basis for specifications Plastics Thermoplastic polyurethanes for moulding and extrusion Part 2: Preparation of test specimens and determination of properties 2014-03-18 2014-03-11 2014-03-11

ISO/FDIS 16365-3 Plastics Thermoplastic polyurethanes for moulding and extrusion Part 3: Distinction between ether and ester polyurethanes by determination of the ester group content 2014-03-11 TC 71 ISO/FDIS 13315-2 TC 86 Concrete, reinforced concrete and pre-stressed concrete Environmental management for concrete and concrete structures Part 2: System boundary and inventory data Refrigeration and air-conditioning 2014-03-08 ISO/FDIS 16345 Water-cooling towers Testing and rating of thermal performance 2014-03-20 ISO/FDIS 817.2 Refrigerants Designation and safety classification 2014-03-09 TC 94 (Revision of ISO 817:2005) Personal safety -- Protective clothing and equipment ISO/FDIS 20346 Personal protective equipment Protective footwear TC 96 (Revision of ISO 20346:2004, ISO 20346:2004/Cor 1:2005, ISO 20346:2004/Amd 1:2007, ISO 20346:2004/Cor 2:2006) Cranes ISO/FDIS 17440 TC 106 Cranes General design Limit states and proof of competence of forged steel hooks Dentistry 2014-03-31 ISO/FDIS 9173-3 Dentistry Extraction forceps Part 3: Design TC 108 (Revision of ISO 9173-1:2006) Mechanical vibration, shock and condition monitoring ISO/FDIS 18436-2 TC 121 Condition monitoring and diagnostics of machines Requirements for qualification and assessment of personnel Part 2: Vibration condition monitoring and diagnostics (Revision of ISO 18436-2:2003) Anaesthetic and respiratory equipment 2014-03-23 ISO/FDIS 80601-2- 67 TC 135 Medical electrical equipment Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment (Revision of ISO 18779:2005) Non-destructive testing ISO/FDIS 12715 TC 138 Non-destructive testing Ultrasonic testing Reference blocks and test procedures for the characterization of contact probe sound beams (Revision of ISO 12715:1999) Plastics pipes, fittings and valves for the transport of fluids 2014-03-28 ISO 8779:2010/FDAmd 1 Plastics piping systems Polyethylene (PE) pipes for irrigation Specifications Amendment 1 2014-03-30 ISO 16486-1:2012/FDAmd 1 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical 2014-03-07

jointing Part 1: General Amendment 1 ISO 16486-2:2012/FDAmd 1 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 2: Pipes Amendment 1 2014-03-07 ISO 16486-3:2012/FDAmd 1 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 3: Fittings Amendment 1 2014-03-07 ISO/FDIS 8513 TC 146 ISO/FDIS 8672 ISO/FDIS 12219-5 ISO/FDIS 16000-31 TC 150 ISO/FDIS 14708-1 TC 161 ISO/FDIS 23551-5 ISO/FDIS 23553-1 TC 164 ISO/FDIS 17340 TC 165 ISO/FDIS 13910 ISO/FDIS 17754 TC 172 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes Test methods for the determination of the apparent initial longitudinal tensile strength (Revision of ISO 8513:2000) Air quality Air quality Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy Membrane filter method (Revision of ISO 8672:1993) Interior air of road vehicles Part 5: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials Static chamber method Indoor air Part 31: Measurement of flame retardants and plasticizers based on organophosphorus compounds Phosphoric acid ester Implants for surgery Implants for surgery Active implantable medical devices Part 1: General requirements for safety, marking and for information to be provided by the manufacturer (Revision of ISO 14708-1:2000) Control and protective devices for gas and/or oil burners and appliances Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 5: Manual gas valves Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves (Revision of ISO 23553-1:2007, ISO 23553-1:2007/Cor 1:2009) Mechanical testing of metals Metallic materials Ductility testing High speed compression test for porous and cellular metals Timber structures Timber structures Strength graded timber Test methods for structural properties (Revision of ISO 13910:2005) Timber structures Test methods Torsional resistance of driving in screws Optics and photonics 2014-03-25 2014-03-23 2014-03-16 2014-03-22 2014-03-23 2014-03-28 ISO/FDIS 10109 Optics and photonics Guidance for the selection of environmental tests 2014-03-22 (Revision of ISO 10109-7:2001, ISO 10109-11:2001, ISO 10109-12:2004,

ISO 10109-1:2005, ISO 10109-6:2005, ISO 10109-8:2005) ISO/FDIS 10343 Ophthalmic instruments Ophthalmometers 2014-03-24 (Revision of ISO 10343:2009) TC 173 Assistive products for persons with disability ISO/FDIS 7176-1 Wheelchairs Part 1: Determination of static stability 2014-03-07 (Revision of ISO 7176-1:1999) TC 180 Solar energy ISO/FDIS 22975-3 TC 190 ISO/FDIS 17184 TC 201 ISO/FDIS 11952 TC 204 ISO/FDIS 11270 TC 205 ISO/FDIS 13612-1 ISO/FDIS 13612-2 TC 206 ISO/FDIS 17094 TC 220 Solar energy Collector components and materials Part 3: Absorber surface durability Soil quality Soil quality Determination of carbon and nitrogen by near-infrared spectrometry (NIRS) Surface chemical analysis Surface chemical analysis Scanning-probe microscopy Determination of geometric quantities using SPM: Calibration of measuring systems Intelligent transport systems Intelligent transport systems Lane keeping assistance systems (LKAS) Performance requirements and test procedures Building environment design Heating and cooling systems in buildings Method for calculation of the system performance and system design for heat pump systems Part 1: Design and dimensioning Heating and cooling systems in buildings Method for calculation of the system performance and system design for heat pump systems Part 2: Energy calculation Fine ceramics Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for antibacterial activity of semiconducting photocatalytic materials under indoor lighting environment Cryogenic vessels 2014-04-07 2014-03-24 2014-03-23 2014-03-21 2014-03-07 2014-03-07 2014-03-23 ISO/FDIS 21010 Cryogenic vessels Gas/materials compatibility 2014-03-10 (Revision of ISO 21010:2004) JTC 1 Information technology ISO/IEC 14443-3:2011/FDAmd 6 Identification cards Contactless integrated circuit cards Proximity cards Part 3: Initialization and anticollision Amendment 6: Bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICC 2014-03-25 ISO/IEC FDIS 23001-9 Information technology MPEG systems technologies Part 9: Common encryption of MPEG-2 transport streams 2014-03-22 ISO/IEC FDIS 23008-1 Information technology High efficiency coding and media delivery in heterogeneous environments Part 1: MPEG media transport (MMT)