Ships and marine technology Marine environment protection Part 1: Oil spill booms Design Criteria
|
|
- Juliana Malone
- 5 years ago
- Views:
Transcription
1 International Standards in process An International Standard is the result of an agreement between the member bodies of. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. CD registered Period from 01 June to 30 June 2012 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. TC 8 /CD TC 17 /CD TC 20 /CD TC 22 /CD 3468 /CD /CD /CD /CD TC 25 /DTR TC 34 /CD TC 37 /CD Ships and marine technology Ships and marine technology Marine environment protection Part 1: Oil spill booms Design Criteria Steel Method for evaluation of hydrogen delayed fracture resistance of high strength steels Aircraft and space vehicles Space systems Disposal of orbital launch stages Road vehicles Passenger cars Windscreen defrosting and demisting systems Test method Road vehicles Ergonomic and performance aspects of Camera-Monitor Systems Requirements and test procedures Electrically propelled road vehicles Safety specifications Part 4: Post crash electrical safety requirements Electrically propelled road vehicles Connection to an external electric power supply Safety requirements Fuel cell road vehicles - Energy consumption measurement Vehicles fuelled with compressed hydrogen Cast irons and pig irons Cast Irons - Classification and designation of casting imperfections Food products Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-beta-Dglucuronide Terminology and other language and content resources Language resource management Semantic annotation framework (SemAF) Part 4: Semantic roles (SemAF-SRL)
2 TC 38 /CD 3074 TC 39 /CD TC 43 /CD TC 44 /CD /CD /CD /CD TC 45 /CD /DTS /CD 1434 TC 46 /CD TC 59 /CD TC 61 /CD /CD TC 67 /DTR TC 68 /CD TC 94 /CD TC 106 /CD /CD Textiles Wool Determination of dichloromethane-soluble matter in combed sliver Machine tools Machines tools Test conditions for accessory spindle heads Part 1: Horizontal spindle machines Acoustics Measurement of minimum noise emitted by road vehicles Welding and allied processes Non-destructive testing of welds Penetrant testing of welds Acceptance levels Non-destructive testing of welds Magnetic particle testing of welds Acceptance levels Specification and qualification of welding procedures for metallic materials Welding procedure test Part 7: Overlay welding Specification and qualification of welding procedures for metallic materials Welding procedure test Part 8: Welding of tubes to tube-plate joints Rubber and rubber products Rubber Identification of polymers Pyrolytic gas-chromatographic method using mass-spectrometric detection Rubber Qualitative determination of vulcanization-fume composition by thermodesorption and gaschromatographic/mass-spectrometric analysis Natural rubber in bales Amount of bale coating Determination Information and documentation Information and documentation A reference ontology for the interchange of cultural heritage information Buildings and civil engineering works Building and civil engineering Vocabulary Part 2: Contract terms Plastics Plastics Determination of water content Plastics Determination of yellowness index and change in yellowness index Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries Petroleum and natural gas industries Site-specific assessment of mobile offshore units Part 2: Jack-ups commentary and detailed sample calculation Financial services Mobile Financial Services Part 1: General framework Personal safety -- Protective clothing and equipment Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven Dentistry Dentistry Mercury and alloys for dental amalgam Dentistry Dental units Part 2: Water and air supply
3 /CD 9687 TC :2005/CD Amd 1 TC 127 /CD :2009/CD Amd 1 TC 130 /CD TC :2011/CD Amd 170 TC 150 /CD TC 156 /DTR TC 161 Dental equipment Graphical symbols Mechanical vibration, shock and condition monitoring Methods for the calibration of vibration and shock transducers Part 22: Shock calibration by comparison to a reference transducer Amendment 1 Earth-moving machinery Earthmoving machines and RTT Design requirements for circulation on the road Earth-moving machinery Hydraulic excavators Terminology and commercial specifications Amendment 1 Graphic technology Graphic technology Method for Radius Determination of Printing Cylinders Graphical symbols Graphical symbols Safety colours and safety signs Registered safety signs Amendment 170: Safety sign M047: Use self-contained breathing appliance Implants for surgery Implants for surgery Calcium phosphates Part 1: Hydroxyapatite powders Corrosion of metals and alloys Corrosion of metals and alloys Corrosion tests in artificial atmospheres Guidelines for selection of accelerated corrosion test for product qualification Control and protective devices for gas and/or oil burners and appliances /CD Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 6: Thermoelectric flame supervision devices TC 163 /CD 9972 TC 165 /CD TC 190 /CD /CD /CD /CD TC 206 /CD TC 209 /CD TC 215 /DTS Thermal performance and energy use in the built environment Thermal performance of buildings Determination of air permeability of buildings Fan pressurization method Timber structures Timber structures - Strength graded timber - Test methods for structural properties Soil quality Soil quality Risk based petroleum hydrocarbons Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method) Soil quality Risk-based petroleum hydrocarbons Part 2: Determination of aliphatic and aromatic fractions of semivolatile petroleum hydrocarbons using gas chromatography with flame ionisation detection (GC/FID) Soil quality Determination of some selected phenols and chlorophenols Gas chromatographic method with mass spectrometric detection Soil quality - Environmental availability in soil Use of soil extracts for the assessment of trace element bioavailability Fine ceramics Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for interfacial bond strength of ceramic materials at elevated temperatures Cleanrooms and associated controlled environments Cleanrooms and associated controlled environments Part 12: Classification of air cleanliness by nanoscale particle concentration Health informatics Health Informatics Sharing of OID registry information
4 /CD IEC/DTR TC 242 /CD JTC 1 /IEC PDTR /IEC PDTR /IEC PDTR /IEC CD /IEC CD /IEC CD /IEC CD /IEC CD /IEC PDTS /IEC CD /IEC CD /IEC CD /IEC PDTR /IEC CD Health informatics Terminology constraints for coded data elements expressed in Harmonized Data Types used in healthcare information interchange Application of risk management for IT-networks incorporating medical devices Part 2-4: General implementation guidance for Healthcare Delivery Organizations Energy Management Energy audits Information technology Telecommunications and Information Exchange Between Systems Future Networks: Problem Statement and Requirements Part 4: Mobility Telecommunications and Information Exchange Between Systems Future Networks: Problem Statement and Requirements Part 6: Media Distribution Telecommunications and Information Exchange Between Systems Future Networks: Problem Statement and Requirements Part 7: Service Composition Identification cards Integrated circuit card programming interfaces Part 1: Architecture Interconnection of information technology equipment Home network management Part 3: Management applications Telebiometric authentication framework using biometric hardware security module (ITU-T X.bhsm /IEC xxxxx) Information technology Security techniques Time-stamping services Part 4: Traceability of time sources Information technology Security techniques Specification for Digital Redaction Information Technology Security Techniques Physical Security Attacks, Mitigation Techniques and Security Requirements Vulnerability handling processes Information Technology for Learning, Education and Training Information Model for Competency Part 1: Competency General Framework and Information Model Information Technology for Learning, Education and Training Information Model for Competency Part 2: Proficiency Level Information Model Passenger Processes for Biometric Recognition in Automated Border Crossing Systems Information Technology Cloud Computing Vocabulary DIS circulated Period from 01 June to 30 June 2012 These documents have obtained substantial support within the appropriate technical committee. They have been submitted to the member bodies for voting by the date shown.
5 * Available in English only Vote terminates TC 8 Ships and marine technology /DIS * Ships and marine technology Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings Part 2: Catalogue /DIS * Ships and marine technology Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings Part 3: Code of practice /DIS * Ships and marine technology Marine environment protection Terminology relating to oil spill response (Revision of 16165:2001) TC 20 Aircraft and space vehicles /DIS * Aerospace Tube fittings for fluid systems, psi ( kpa) Qualification specification /DIS * Aerospace series Fitting end, 24 internal cone, external thread, flareless type extra fine thread pitch inch series Design standard /DIS * Space data and information transfer systems TC (telecommand) space data link protocol (Revision of 22664:2005) /DIS * Space data and information transfer systems Communications operation procedure (Revision of 22667:2005) /DIS * Space data and information transfer systems Space link extension (SLE) Return-all-frames service (Revision of 22669:2007) /DIS * Space data and information transfer systems Space link extension (SLE) Return-channelframes service (Revision of 22670:2006) /DIS * Space data and information transfer systems Space link extension (SLE) Return operational control fields service (Revision of 26143:2007) /DIS Space environment (natural and artificial Earth's internal magnetic reference field models TC 22 Road vehicles /DIS * Diesel engines 60 degree female cones for high-pressure fuel injection components (Revision of 2974:2005) /DIS TC 23 Commercial road vehicles Coupling equipment between vehicles in multiple vehicle combinations Part 3: Strength requirements Tractors and machinery for agriculture and forestry /DIS * Tractors for agriculture and forestry Falling object protective structures Test procedures and performance requirements :2009/DAm d 1 * Powered hand-held hedge trimmers Safety Amendment /DIS Agricultural irrigation equipment Filters for microirrigation Part 2: Strainer-type filters and disc filters (Revision of :1992) /DIS * Tractors and machinery for agriculture and forestry Serial control and communications data
6 network Part 6: Virtual terminal (Revision of :2010, :2010/CD Amd 1) /DIS * Standardization of injection sites for different animal species Part 1: Companion animals (cats and dogs) /DIS * Radio frequency identification of animals RFID transceivers Part 5: Procedure for testing the capability of reading and transponders TC 28 Petroleum products and lubricants /DIS * Liquid petroleum products Determination of hydrocarbon types and oxygenates in automotivemotor gasoline Multidimensional gas chromatography method (Revision of 22854:2008) TC 30 /DIS Measurement of fluid flow in closed conduits * Water meters for cold potable water and hot water Part 1: Metrological and technical requirements (Revision of :2005) /DIS * Water meters for cold potable water and hot water Part 2: Test methods (Revision of :2005) TC 34 Food products /DIS * Flour from wheat (Tricum aestivum) Method for the measurement of damage to starch using an amperometric method /DIS * Whole meal and flour from wheat (Triticum aestivum) Determination of rheological behaviour as a function of mixing and temperature increase /DIS * Molecular biomarker analysis General definitions and requirements for microarray detection of specific nucleic acid sequences TC 42 Photography /DIS * Photography Electronic still picture imaging Resolution and spatial frequency responses (Revision of 12233:2000) /DIS * Imaging materials Processed imaging materials Albums, framing and storage materials (Revision of 18902:2007, 18902:2007/Cor 1:2009) TC 45 Rubber and rubber products /DIS 1629 * Rubber and latices Nomenclature (Revision of 1629:1995, 1629:1995/Amd 1:2007) /DIS * Polyurethane tubing for use primarily in pneumatic installations Dimensions and specification TC 58 Gas cylinders /DIS 5145 * Cylinder valve outlets for gases and gas mixtures Selection and dimensioning (Revision of 5145:2004, 5145:2004/Amd 1:2006, 5145:2004/Amd 2:2008) TC 59 Buildings and civil engineering works /DIS * Building and civil engineering Vocabulary Part 1: General terms (Revision of :2004) TC 61 Plastics /DIS * Plastics Polyamide (PA) moulding and extrusion materials Part 1: Designation system, marking of products and basis for specifications
7 (Revision of :2010) /DIS * Plastics Polyethylene (PE) moulding and extrusion materials Part 1: Designation system and basis for specifications (Revision of :1993) TC 70 Internal combustion engines /DIS * Methods of test for full-flow lubricating oil filters for internal combustion engines Part 13: Static burst pressure test for composite pressure vessel materials TC 94 Personal safety -- Protective clothing and equipment /DIS * Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications Part 1: Specification for products /DIS TC 106 * Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications Part 2: Guidance for use Dentistry /DIS * Dentistry Screening method for erosion potential of oral rinses on dental hard tissues TC 122 /DIS TC 123 Packaging * Packaging Numeric Codification of Contents for Electronic Inventories and Manifests of Household Goods and Personal Effects Shipments Part 1: Messaging and coding of inventory numbers, locations and exceptions Plain bearings /DIS * Plain bearings Thin-walled half bearings with or without flange Part 1: Tolerances, design features and methods of test (Revision of 3548:1999) TC 130 Graphic technology /DIS * Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 1: Parameters and measurement methods (Revision of :2004) /DIS * Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 2: Offset lithographic processes (Revision of :2004, :2004/Amd 1:2007) /DIS * Graphic technology Management of security printing processes /DIS * Graphic technology Quantification and communication for calculating the carbon footprint of print media products TC Graphical symbols 119: Safety sign E027: Medical grab bag 120: Safety sign E028: Oxygen resuscitator 121: Safety sign E029: Emergency escape breathing device 122: Safety sign E030: Shipboard safety equipment
8 : Safety sign E031: Shipboard general alarm 124: Safety sign E032: Shipboard assembly station 125: Safety sign E033: Door slides right to open 126: Safety sign E034: Door slides left to open 128: Safety sign E036: Lifeboat 129: Safety sign E037: Rescue boat 130: Safety sign E038: Liferaft 131: Safety sign E039: Davit-launched liferaft 132: Safety sign E040: Lifebuoy 133: Safety sign E041: Lifebuoy with line 134: SAfety sign E042: Lifebuoy with light 135: Safety sign E043: Lifebuoy with line and light 136: Safety sign E044: Lifejacket 137: Safety sign E045: Child's lifejacket 138: Safety sign E046: Infant's lifejacket 139: Safety sign E047: Search and rescue transponder 140: Safety sign E048: Survival craft distress signal 141: Safety sign E049: Rocket parachute flare
9 : Safety sign E050: Line-throwing appliance 143: Safety sign E051: Two-way VHF radiotelephone apparatus 144: Safety sign E052: Emergency position indicating radio beacon 145: Safety sign E053: Embarkation ladder 146: Safety sign E054: Marine evacuation slide 147: Safety sign E055: Marine evacuation chute 148: Safety sign E056: Survival clothing 149: Safety sign F008: Fixed fire extinguishing battery 150: Safety sign F009: Wheeled fire extinguisher 151: Safety sign F010: Portable foam applicator unit 152: Safety sign F011: Water fog applicator 153: Safety sign F012: Fixed fire extinguishing installation 154: Safety sign F013: Fixed fire extinguishing bottle 155: Safety sign F014: Remote release station 156: Safety sign F015: Fire monitor 157: Saferty sign M037: Close and secure hatches in launch sequence 158: Safety sign M038: Start engine in launch sequence 159: Safety sign M039: Lower lifeboat to the water in launch sequence
10 TC :1993/DAm d 1 TC : Safety sign M040: Lower liferaft to the water in launch sequence 161: Safety sign M041: Lower rescue boat to the water in launch sequence 162: Safety sign M042: Release falls in launch sequence 163: Safety sign M043: Start water spray in launch sequence 164: Safety sign M044: Start air supply in launch sequence 165: Safety sign M045: Release lifeboat gripes in launch sequence 166: Safety sign E057: Door opens by pulling on the left-hand side 167: Safety sign E058: Door opens by pulling on the right-hand side Nickel and nickel alloys Nickel alloys Determination of titanium content Diantipyrylmethane molecular absorption spectrometric method Amendment 1 Control and protective devices for gas and/or oil burners and appliances /DIS * Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves (Revision of :2007, :2007/Cor 1:2009) TC 163 Thermal performance and energy use in the built environment /DIS * Energy performance of buildings Methods for expressing energy performance and for energy certification of buildings (Revision of /WD 12842) /DIS * Energy performance of buildings Assessment of overall energy performance (Revision of /CD 11368, /WD 12842) /DIS * Hygrothermal performance of building materials and products Determination of hygroscopic sorption properties (Revision of 12571:2000) /DIS * Thermal insulating products for building equipment and industrial installations Determination of maximum service temperature for preformed pipe insulation /DIS * Thermal insulating products for building equipment and industrial installations Determination of maximum service temperature /DIS * Thermal insulating products for building equipment and industrial installations Determination of the apparent density of preformed pipe insulation /DIS * Thermal insulating products for building equipment and industrial installations Determination of the coefficient of thermal expansion /DIS * Hygrothermal performance of building equipment and industrial installations Calculation of water
11 vapour diffusion Cold pipe insulation systems (Revision of 15758:2004) TC 172 Optics and photonics /DIS * Ophthalmic implants Intraocular lenses Part 7: Clinical investigations (Revision of :2006) TC 190 Soil quality /DIS * Soil quality Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high-resolution mass selective detection (HR GC/MS) TC 201 /DIS TC 204 Surface chemical analysis Surface chemical analysis X-ray photoelectron spectroscopy Reporting of results of thin-film analysis Intelligent transport systems /DIS * Intelligent transport systems Communications access for land mobiles (CALM) Access technology support (Revision of 21218:2008) /DIS * Intelligent transport system - Forward vehicle collision mitigation systems - Operation, performance, and verification requirements /DIS * Intelligent transport systems Communications access for land mobiles (CALM) ITS station management Part 1: Local management (Revision of 24102:2010) /DIS * Intelligent transport systems Communications access for land mobiles (CALM) ITS station management Part 3: Service access points (Revision of 24102:2010) /DIS * Intelligent transport systems Communications access for land mobiles (CALM) ITS station management Part 4: Station-internal management communications (Revision of 24102:2010) /DIS * Intelligent transport systems Communications access for land mobiles (CALM) ITS station management Part 5: Fast service advertisement protocol (FSAP) (Revision of 24102:2010) /DIS Intelligent transport systems Communication access for land mobiles (CALM) Non-IP networking Part 1: Fast networking & transport layer protocol (FNTP) (Revision of 29281:2011) /DIS TC 215 Intelligent transport systems Communication access for land mobiles (CALM) Non-IP networking Part 2: Legacy system support (Revision of 29281:2011) Health informatics /DIS * Health informatics Patient healthcard data Part 2: Common objects (Revision of :2004) /DIS * Health informatics Patient healthcard data Part 3: Limited clinical data (Revision of :2004) /DIS * Health informatics Patient healthcard data Part 4: Extended clinical data (Revision of :2006) JTC 1 Information technology
12 /IEC DIS Information technology Telecommunications and information exchange between systems Near Field Communication Interface and Protocol (NFCIP-1) (Revision of /IEC 18092:2004) /IEC DIS Information technology Telecommunications and information exchange between systems Near Field Communication Interface and Protocol (NFCIP-1) RF interface test methods (Revision of /IEC 22536:2005) /IEC DIS Systems and software engineering Software Engineering Environment Services (Revision of /IEC 15940:2006) /IEC DIS /IEC :2011/DAmd 6 /IEC :2008/DAmd 3 /IEC DIS 9973 Software and Systems Engineering - Reference model for product line engineering and management Identification cards Contactless integrated circuit cards Proximity cards Part 3: Initialization and anticollision Amendment 6: Bit rates of 3fc/4, fc, 3fc/2 and 2fc Identification cards Contactless integrated circuit cards Proximity cards Part 4: Transmission protocol Amendment 3: Bit rates of 3fc/4, fc, 3fc/2 and 2fc Information technology Computer graphics, image processing and environmental data representation Procedures for registration of items (Revision of /IEC 9973:2006) /IEC DIS Information technology Multimedia service platform technologies Part 4: Elementary services (Revision of /IEC :2010) /IEC DIS Information technology Machine readable test data for biometric testing and reporting Part 1: Test reports FDIS circulated Period from 01 June to 30 June 2012 These Final draft International Standards have been submitted to the member bodies for formal approval by the date shown * Available in English only Vote terminates TC 5 Ferrous metal pipes and metallic fittings /FDIS * Pipework Corrugated metal hoses and hose assemblies (Revision of 10380:2003)
13 TC 8 Ships and marine technology /FDIS 3434 * Ships and marine technology Heated glass panes for ships' rectangular windows (Revision of 3434:1992, 3434:1992/Amd 1:2004) /FDIS /FDIS /FDIS /FDIS TC 17 /FDIS * Ships and marine technology Protective coatings and inspection method Part 1: Dedicated sea water ballast tanks * Ships and marine technology Protective coatings and inspection method Part 2: Void spaces of bulk carriers and oil tankers * Ships and marine technology Protective coatings and inspection method Part 3: Cargo oil tanks of crude oil tankers * Ships and marine technology Large yachts Deck crane and access gangways strength requirements Steel * Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering (Revision of 683-1:1987) /FDIS * Heat-treatable steels, alloy steels and free-cutting steels Part 2: Alloy steels for quenching and tempering (Revision of 683-1:1987, /TR 11637:1997) /FDIS * Heat-treatable steels, alloy steels and free-cutting steels Part 11: Case-hardening steels (Revision of :1987) TC :1993/FDAmd 1 Aircraft and space vehicles * Aircraft Solid-state remote power controllers General requirements Amendment :2005/FDAmd 1 * Aircraft Crimp-removable contacts for electrical connectors Identification system Amendment /FDIS * Space systems Test procedure to evaluate spacecraft material ejecta upon hypervelocity impact /FDIS * Space systems Launch pad and integration site Facility, system and equipment failure analysis TC 23 /FDIS Tractors and machinery for agriculture and forestry * Agricultural irrigation equipment Sprinklers Part 3: Characterization of distribution and test methods (Revision of :2004) /FDIS TC 35 * Tractors and machinery for agriculture and forestry Test procedures for positioning and guidance systems in agriculture Part 2: Testing of satellite-based auto-guidance systems during straight and level travel Paints and varnishes /FDIS * Paints and varnishes Determination of film hardness by pencil test (Revision of 15184:1998) /FDIS * Paints and varnishes Corrosion protection of steel structures by protective paint systems Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces (Revision of 19840:2004) TC 37 Terminology and other language and content resources /FDIS * Language resources management Multilingual information framework
14 TC 38 /FDIS 105-A11 TC 41 Textiles * Textiles Tests for colour fastness Part A11: Determination of colour fastness grades by digital imaging techniques Pulleys and belts (including veebelts) /FDIS 1120 * Conveyor belts Determination of strength of mechanical fastenings Static test method (Revision of 1120:2002) TC 44 Welding and allied processes /FDIS * Water-cooled secondary connection cables for resistance welding Part 3: Test requirements (Revision of :1993) /FDIS * Soft soldering fluxes Test methods Part 10: Flux efficacy test, solder spread method (Revision of :1998) TC 54 Essential oils /FDIS 1342 * Essential oil of rosemary (Rosmarinus officinalis L.) (Revision of 1342:2000) TC :2005/FDAmd 1 TC 61 Gas cylinders * Gas cylinders Precautionary labels Amendment Plastics /FDIS * Plastics Acquisition and presentation of comparable multipoint data Part 2: Thermal and processing properties (Revision of :2004) /FDIS 9772 TC 67 * Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame (Revision of 9772:2001, 9772:2001/Amd 1:2003) Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries /FDIS 3183 * Petroleum and natural gas industries Steel pipe for pipeline transportation systems (Revision of 3183:2007) TC 69 /FDIS TC 84 Applications of statistical methods * Statistical methods in process management Capability and performance Part 7: Capability of measurement processes Devices for administration of medicinal products and intravascular catheters /FDIS * Needle-based injection systems for medical use Requirements and test methods Part 3: Finished containers (Revision of :2000) /FDIS * Needle-based injection systems for medical use Requirements and test methods Part 5: Automated functions TC :2007/FDAm d 1 Personal safety -- Protective clothing and equipment * Protective clothing for protection against chemicals Classification, labelling and performance requirements Amendment
15 TC 96 Cranes /FDIS * Cranes Vocabulary Part 2: Mobile cranes (Revision of :1994) TC :2005/FDAmd 1 Dentistry * Dentistry Periodontal curettes, dental scalers and excavators Part 2: Periodontal curettes of Grtype Amendment 1: Colour coding /FDIS * Dentistry Handpieces and motors (Revision of 11498:1997, :1995, 13294:1997, :1997) /FDIS * Dentistry Periodontal probes Part 2: Designation /FDIS TC 108 * Dentistry Digitizing devices for CAD/CAM systems for indirect dental restorations Test methods for assessing accuracy Mechanical vibration, shock and condition monitoring /FDIS * Condition monitoring and diagnostics of machines Vocabulary (Revision of 13372:2004) TC 118 /FDIS TC 121 Compressors and pneumatic tools, machines and equipment * Hand-held portable power tools Test methods for evaluation of vibration emission Part 12: Die grinders (Revision of :1997, :1997/Cor 1:1998) Anaesthetic and respiratory equipment /FDIS 5361 * Anaesthetic and respiratory equipment Tracheal tubes and connectors (Revision of 5361:1999) TC 127 Earth-moving machinery /FDIS 6165 * Earth-moving machinery Basic types Identification and terms and definitions (Revision of 6165:2006) TC 135 Non-destructive testing /FDIS 2400 * Non-destructive testing Ultrasonic testing Specification for calibration block No (Revision of 2400:1972) TC 150 Implants for surgery /FDIS * Non-active surgical implants General requirements (Revision of 14630:2008, 14630:2008/DAmd 1) TC 154 /FDIS /FDIS TC 159 Processes, data elements and documents in commerce, industry and administration * Processes, data elements and documents in commerce, industry and administration Long term signature profiles Part 1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES) * Processes, data elements and documents in commerce, industry and administration Long term signature profiles Part 2: Long term signature profiles for XML Advanced Electronic Signatures (XAdES) Ergonomics /FDIS * General requirements for establishing anthropometric databases (Revision of 15535:2006)
16 TC 172 Optics and photonics /FDIS 9334 * Optics and photonics Optical transfer function Definitions and mathematical relationships (Revision of 9334:2007) /FDIS 9335 * Optics and photonics Optical transfer function Principles and procedures of measurement (Revision of 9335:1995, 9335:1995/Cor 1:2005) /FDIS * Ophthalmic implants Intraocular lenses Part 1: Vocabulary (Revision of :2006) :2008/FDAmd 1 TC 173 * Ophthalmic implants Intraocular lenses Part 4: Labelling and information Amendment Assistive products for persons with disability /FDIS * Wheelchairs Part 28: Requirements and test methods for stair-climbing devices (Revision of :2002, :2004) /FDIS TC 176 * Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 1: Requirements and test methods for all systems (Revision of :2001) Quality management and quality assurance /FDIS * Quality management Customer satisfaction Guidelines for monitoring and measuring (Revision of /TS 10004:2010) /FDIS * Quality management Guidelines on people involvement and competence TC 178 /FDIS TC 181 Lifts, escalators and moving walks * Energy performance of lifts, escalators and moving walks Part 1: Energy measurement and verification Safety of toys /FDIS Safety of toys Part 1: Safety aspects related to mechanical and physical properties (Revision of :2009) TC 182 Geotechnics /FDIS * Geotechnical investigation and testing Field testing Part 4: Ménard pressuremeter test TC 190 Soil quality /FDIS * Soil quality Determination of abundance and activity of soil microflora using respiration curves (Revision of 17155:2002) TC 195 /FDIS TC 204 /FDIS /FDIS TC 205 Building construction machinery and equipment * Road construction and maintenance equipment Soil stabilizers Terminology and commercial specifications (Revision of 15688:2003) Intelligent transport systems * Intelligent transport systems Automatic vehicle and equipment identification Intermodal goods transport architecture and terminology (Revision of /TS 17261:2005, /TS 17261:2005/Cor 1:2005) * Intelligent transport systems Automatic vehicle and equipment identification Numbering and data structures (Revision of /TS 17262:2003) Building environment design
17 /FDIS TC 213 /FDIS TC 215 /FDIS 1828 TC 236 * Framework of the design process for energy-saving single-family residential and small commercial buildings with the energy consumption ratio as a criterion Dimensional and geometrical product specifications and verification * Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (Revision of /TS :2002, /TS :2002/Cor 1:2004) Health informatics * Health informatics Categorial structure for classifications and coding systems of surgical procedures Project Committee: Project Management /FDIS * Guidance on project management TC 241 Project Committee: Road traffic safety management systems /FDIS * Road traffic safety (RTS) management systems - Requirements with guidance for use JTC 1 /IEC :2008/FDAmd 2.2 /IEC FDIS Information technology * Identification cards Contactless integrated circuit cards Proximity cards Part 4: Transmission protocol Amendment 2: Bit rates of fc/8, fc/4 and fc/2, protocol activation of PICC Type A and frame size from 512 bytes to bytes * Information technology Radio frequency identification for item management Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General (Revision of /IEC :2010) /IEC FDIS * Information technology Radio frequency identification for item management Part 63: Parameters for air interface communications at 860 MHz to 960 MHz Type C
ISO NORMAS PUBLICADAS. ISO/IEC TR : Information technology - Future Network - Problem statement and requirements - Part 5: Security.
ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC TR 29181-5:2014 - Information technology - Future Network - Problem statement and requirements - Part 5: Security. ISO/IEC TR 29181-2:2014
More informationG Calculation of perforation efficiency ISO/TR 24498: 2006 Paper, board and pulps Estimation of uncertainty for test methods C
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More informationISO NORMAS PUBLICADAS. ISO/IEC 10646: Information technology - Universal Coded Character Set (UCS).
ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC 10646:2014 - Information technology - Universal Coded Character Set (UCS). ISO/IEC 24771:2014 - Information technology - Telecommunications
More informationResolution A.1116(30) Adopted on 5 December 2017 ESCAPE ROUTE SIGNS AND EQUIPMENT LOCATION MARKINGS
E ASSEMBLY 30th session Agenda item 9 6 December 2017 Original: ENGLISH Resolution A.1116(30) Adopted on 5 December 2017 (Agenda item 9) THE ASSEMBLY, RECALLING Article 15(j) of the Convention on the International
More informationISO NORMAS PUBLICADAS. ISO/IEC : Information technology -- Security techniques -- Anonymous digital signatures -- Part 1: General
ISO NORMAS PUBLICADAS ISO/JTC - Information technology ISO/IEC 20008-1:2013 - Information technology -- Security techniques -- Anonymous digital signatures -- Part 1: General ISO/IEC 14496-3:2009/Amd 4:2013
More informationISO NORMAS PUBLICADAS JANEIRO E FEVEREIRO
ISO NORMAS PUBLICADAS JANEIRO E FEVEREIRO ISO/JTC 1 - Information technology ISO/IEC 9075-1:2016 - Information technology -- Database languages -- SQL -- Part 1: Framework (SQL/Framework) ISO/IEC 9075-2:2016
More informationISO PROJETOS EM VOTAÇÂO. ISO/IEC/IEEE DIS Systems and software engineering - System life cycle processes
ISO PROJETOS EM VOTAÇÂO ISO/IEC JTC 1 - Information technology ISO/IEC/IEEE DIS 15288 - Systems and software engineering - System life cycle processes ISO/IEC 15444-1:2004/DAmd 8 - Information technology
More informationTissue paper and tissue products Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method
International Standards in process An International Standard is the result of an agreement between the member bodies of. A first important step towards an International Standard takes the form of a committee
More information1 EN : EN : EN 71-7:2014+A1: EN 302-2: EN 302-3: EN 303-1: EN : EN ISO :2017
Nr. Standard reference Title 1 EN 419212-1:2017 2 EN 419212-3:2017 3 EN 71-7:2014+A1:2017 4 EN 302-2:2017 5 EN 302-3:2017 6 EN 303-1:2017 7 EN 1459-1:2017 8 EN ISO 1833-4:2017 9 EN ISO 1833-7:2017 10 EN
More informationTECHNICAL ALERT No
Technical Alert No. 18-07 Issue Date 09 Nov 2018 TECHNICAL ALERT No. 18-07 Escape Route Signs and equipment location markings 1. Introduction 1.1. This Technical Alert is issued in regard to new escape
More informationISO NORMAS PUBLICADAS
ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC 29182-7:2015 - Information technology - Sensor networks: Sensor Network Reference Architecture (SNRA) - Part 7: Interoperability guidelines.
More informationISO PROJETOS EM VOTAÇÂO
ISO PROJETOS EM VOTAÇÂO ISO/IEC JTC 1 - Information Technology ATÉ 04 DE MARÇO DE 2015. ISO/IEC DIS 29341-12-1 (Ed 2) - Information technology - UPnP Device Architecture - Part 12-1: Remote User Interface
More informationISO NORMAS PUBLICADAS
ISO NORMAS PUBLICADAS ISO/JTC 1 - Information technology ISO/IEC 14651:2016 - Information technology - International string ordering and comparison - Method for comparing character strings and description
More informationAerospace - Tube fittings for fluid systems, psi ( kpa) - Qualification specification
International Standards in process An International Standard is the result of an agreement between the member bodies of. A first important step towards an International Standard takes the form of a committee
More informationNr. Standard reference Title 1 EN 54-28:2016. Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors
Nr. Standard reference Title 1 EN 54-28:2016 Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors 2 EN 59:2016 Glass reinforced plastics - Determination of indentation
More informationNr. Standard reference Title
Nr. Standard reference Title 1 CEN/TR 419040:2018 Rationalized structure for electronic signature standardization - Guidelines for citizens 2 CEN/TR 419030:2018 Rationalized structure for electronic signature
More informationBSOL Modules EC Directives
BSOL Modules EC Directives Module Title 90-396-EEC 94-9-EC 00-9-EC 89-106-EEC 89-339-EEC 93-15-EEC 95-16-EC 73-23-EEC Appliance Burning Equipment & Protective Cableway Installations Construction Electromagnetic
More informationRolling bearings Radial bearings Dimensional and geometrical tolerances
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More informationISO NORMAS PUBLICADAS. ISO/IEC 19845: Information technology - Universal Business Language
ISO NORMAS PUBLICADAS ISO/JTC 1 - Information technology ISO/IEC 19845:2015 - Information technology - Universal Business Language ISO/IEC 23001-12:2015 - Information technology - MPEG systems technologies
More informationNr. Standard reference Title 1 CEN/CLC Guide 34:2016 CEN and CENELEC representation in official meetings
Nr. Standard reference Title 1 CEN/CLC Guide 34:2016 CEN and CENELEC representation in official meetings 2 EN 47:2016 3 EN 204:2016 4 EN 205:2016 5 EN 350:2016 6 EN 384:2016 7 EN ISO 389-7:2005/A1:2016
More informationStandards - Withdrawn The dates in brackets following the document number are the year of publication and the withdrawal date.
SANS 506 (2011) (2017-08-04) Timber preservative - Alkaline-copper-quaternary type Covers two types of alkaline-copper-quaternary (ACQ) type timber preservatives and gives minimum and maximum values of
More informationDiesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method 3 EN 280:2013+A1:2015
Nr. Standard reference Title 1 EN 49-2:2015 Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 2: Application
More informationEXPRESSION OF INTEREST (EOI) FOR. Fire Fighting System (FFS)
EXPRESSION OF INTEREST (EOI) FOR Fire Fighting System (FFS) KWtE-03-PR-EO-ACC-0 Rev01 11 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 5 1 Project overview ACCIONA s Engineering, Procuring
More informationISO PROJETOS EM VOTAÇÂO NOVEMBRO E DEZEMBRO DE 2016
ISO PROJETOS EM VOTAÇÂO NOVEMBRO E DEZEMBRO DE 2016 ISO/JTC1 Information Technology ATÉ 22 DE DEZEMBRO DE 2016 ISO/IEC DIS 17203 (Ed 2) - Information technology -- Open Virtualization Format (OVF) specification
More informationISO NORMAS PUBLICADAS
ISO NORMAS PUBLICADAS ISO/JTC - Information technology ISO/IEC 29182-3:2014 - Information technology -- Sensor networks: Sensor Network Reference Architecture (SNRA) -- Part 3: Reference architecture views
More informationTBT/W/45 GENERAL AGREEMENT ON. TARIFFS AND TRADE Special Distribution 47-48).
GENERAL AGREEMENT ON RESTRICTED TARIFFS AND TRADE Special Distribution Committee on Technical Barriers to Trade INFORMATION ON EXISTING INTERNATIONAL STANDARDS Note by the secretariat 1. At its meeting
More information3. Low location lighting system. 4. Illuminated emergency units. 5. Cabin escape route plans
1. Signs for fire protective installation 2. Signs for escape routes 3. Low location lighting system 4. Illuminated emergency units 5. Cabin escape route plans 117 1.SIGNS FOR FIRE PROTECTIVE INSTALLATION
More informationWork Programme CEN/TC 251 Health informatics
Secretariat: Nederlands Normalisatie-instituut doc.nr. Vlinderweg 6 P.O. box 5059 CEN/TC 251 2623 AX Delft, 2600 GB Delft, NL NL Netherlands Netherlands telephone: +31 15 2 690 313 date 2008-05-15 total
More informationStandardization Programme ( ) Building & Construction Standards Committee
Standardization Programme (2012-2013) Building & Construction Standards Committee Projects Title 2012 2013 Jul Aug Sep Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1 EN 12811: 2 EN 197-1:2011
More informationHexagon bolts with flange Small series Product grade A E. Corrugated fibreboard Determination of single sheet thickness E
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More informationVydané medzinárodné normy a iné publikácie IEC za obdobie od do
Vydané medzinárodné normy a iné publikácie IEC za obdobie od 1. 1. 2016 do 31. 1. 2016 IEC TC/SC Dokument Dátum vydania Názov ISO/IEC JTC 1/SC 6 ISO/IEC/IEEE 8802-1AX:2016 2016-01-14 Information technology
More informationEngineered for life safety! Fire Control Plan & Life Saving Symbols LIT590
Engineered for life safety! ire Control lan & Life Saving Symbols LIT590 ire Control lan & Life Saving Symbols JALITE IRE IGTING & LIE SAVING EQUIMENT SYMBOLS ACK The complete set of ire Control lan &
More informationSTANDARDS FROM EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN) 01 GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION. Title ICS1 Withdrawn
418 70 70/2016 I 2012 5 (CYS) STANDARDS FROM EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN) 01 GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION 736-2:2016 572-1:2012 Valves - Terminology - Part
More informationANNEX. to the. COMMISSION DELEGATED REGULATION (EU) /... of XXX
EUROPEAN COMMISSION Brussels, 9.1.2018 C(2017) 9017 final ANNEX 1 ANNEX to the COMMISSION DELEGATED REGULATION (EU) /... of XXX supplementing Directive 2014/90/EU of the European Parliament and of the
More informationIEC NORMAS PUBLICADAS SETEMBRO E OUTUBRO DE 2018
IEC NORMAS PUBLICADAS SETEMBRO E OUTUBRO DE 2018 IEC/TC 2 - Rotating machinery IEC 60034-14:2018 - Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56
More informationTextiles - Tests for colour fastness - Part B03: Colour fastness to weathering: Outdoor exposure (ISO 105-B03:2017) 3 EN ISO 287:2017
Nr. Standard reference Title 1 EN 419212-2:2017 Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 2: Signature and Seal Services 2 EN ISO
More informationHeating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners 4 EN 565:2017
Nr. Standard reference English title 1 EN 71-3:2013+A2:2017 Safety of toys - Part 3: Migration of certain elements 2 EN 71-14:2014+A1:2017 Safety of toys - Part 14: Trampolines for domestic use 3 EN 303-2:2017
More informationIMO-SKYLTAR, brandutrustning 150 x 150 mm
150 x 150 mm IRE LAN 1. ire control plan 2. ush-button/switch for fire alarm 3. Horn fire alarm 4. Bell fire alarm 5. Manually operated call point 6. Space protected by automatic fire alarm S S S 7. ire
More informationΔ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 202/2015 Απ. 4877, Απιθμόρ 202 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012
Δ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 202/2015 Απ. 4877, 12.6.2015 Απιθμόρ 202 1430 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012 Γλωζηνπνίεζε βάζεη ηνπ άξζξνπ 5 ηνπ βαζηθνύ Νόκνπ 156(Η)
More informationShips and marine technology - Protective coatings and inspection method Part 5: Assessment method for coating damages
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More informationIEC/TC IEC/TC44 IEC/TC44. Amd.1DC:201. Ed.3CD:2011. Ed.2.1:2008. Amd.1CDV ED.1: 一連番号 Ed.
IEC/TC44 20-3-7 IEC/TC44 IEC/TC44 6 TC44 TC44 TC44 TC44 TC44 WD, CD, CDV TC44 一連番号 IEC 60027-:992 (Ed.) (995 corrected and reprinted) Letter symbols to be used in electrical technology Part : General 2
More informationFurniture - Children's cots and folding cots for domestic use - Part 1: Safety requirements 5 EN 716-2:2017
Nr. Standard reference Title 1 CEN/CLC Guide 35:2017 Modalities for the common sessions of CEN and CENELEC governing bodies and for the common meetings of their advisory groups 2 EN ISO 294-1:2017 Plastics
More informationSafety of toys - Part 5: Chemical toys (sets) other than experimental sets 2 CEN/TS 115-4:2015
Nr. Standard reference English title 1 EN 71-5:2015 Safety of toys - Part 5: Chemical toys (sets) other than experimental sets 2 CEN/TS 115-4:2015 Safety of escalators and moving walks - Part 4: Interpretations
More informationInstructions for use of products by consumers. ISO 4032:2012 Hexagon regular nuts (style 1) Product grades A and B C
Standards published New International Standards published between 01 December and 31 December 2012 * Available in English only ** French version of standard previously published in English only Price group
More informationNotice on the implementation of the amendments to the FSS Code in resolution MSC.339(91)
C C S 通函 Circular China Classification Society (2013) Circ.111 /Total No.397 25/07/2013 (total pages:18) To relevant departments of CCS Headquarters, Shanghai Rules and Research Institute, plan approval
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60601-2-13 Third edition 2003-05 Medical electrical equipment Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems Appareils électromédicaux
More informationIMO INTERPRETATIONS OF FIRE PROTECTION-RELATED PROVISIONS OF THE HSC CODE
INTERNATIONAL MARITIME ORGANIZATION 4 ALBERT EMBANKMENT LONDON SE1 7SR Telephone: 0171-735 7611 Fax: 0171-587 3210 Telex: 23588 IMOLDN G Ref. T4/4.01 IMO E MSC/Circ.911 4 June 1999 INTERPRETATIONS OF FIRE
More informationStandards for nanotechnologies
Standards for nanotechnologies Dr Peter Hatto, Chairman ISO TC 229, CEN TC 352 and BSI NTI/1 Nanotechnologies standardization committees Director of Research, IonBond Ltd Standards and standardization
More informationIEC NORMAS PUBLICADAS. As normas ISO/IEC já estão relacionadas em normas ISO Publicadas
IEC NORMAS PUBLICADAS As normas ISO/IEC já estão relacionadas em normas ISO Publicadas IEC/TC 1 - Terminology IEC 60050-161-am5 ed1.0 (2015-02) - Amendment 5 - International Electrotechnical Vocabulary
More informationExplosion Protection Engineering Principles
Handbook of Fire and Explosion Protection Engineering Principles for Oil, Gas, Chemical and Related Facilities Second edition Dennis P. Nolan ELSEVIER AMSTERDAM BOSTON HEIDELBERG LONDON NEW YORK OXFORD
More informationCHEMICALS AND CONSUMER PRODUCTS
UGANDA NATIONAL BUREAU OF STANDARDS (UNBS) STANDARDS DEPARTMENT STANDARDS DEVELOPMENT WORK PROGRAM January to June 2018 Proposed Title Edition Number ICS Number Standard Number Stage Stage Update Date
More informationIranian Classification Society Convention and Legislation Department Code: Tech Contents
Page 2 of 12 Contents section A)Fire fighting appliances(ffa): 3 section B)Life saving appliances(lsa)... 9 section C)Attachements... 12 SECTION A) 1. General guide for Firefighting appliances(ffa): 1.1
More informationA safe journey with Dräger CRUISE CATALOGUE
A safe journey with Dräger CRUISE CATALOGUE Introduction ADVANTAGES Total FRS package Fast delivery 24/7, 365 days support Largest FRS product range Top quality Worldwide Dräger locations SAFETY ON BOARD
More informationIRISH STANDARDS BASED ON CEN STANDARDS PUBLISHED ON
IRISH STANDARDS BASED ON CEN STANDARDS PUBLISHED ON 15 JUNE 2007 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. I.S. EN 54-4:1997/A2:2007 Fire detection and fire alarm systems - Part 4: Power supply equipment I.S.
More informationMauritian Standards/Amendments Published in 2013
Mauritian Standards/Amendments Published in 2013 Reference Title 2013 Notice No. Date Gazetted 2013 1 R MS 200:2013 Energy efficiency and labelling requirements Household room air conditioners 2 MS 207:2013
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62341-5-2 Edition 2.0 2019-03 colour inside Organic light emitting diode (OLED) displays Part 5-2: Mechanical endurance test methods INTERNATIONAL ELECTROTECHNICAL COMMISSION
More informationNumerical Standards Listing
ISA-RP2.1-1978 - Manometer Tables Numerical Standards Listing ISA-5.1-1984 (R1992) - Instrumentation Symbols and Identification (Formerly ANSI/ISA-5.1-1984 [R1992]) ISA-5.2-1976 (R1992) - Binary Logic
More informationISO/TC 211 GEOGRAPHIC INFORMATION AND GEOMATICS A FRAMEWORK AND REFERENCE MODEL
ISO/TC 211 GEOGRAPHIC INFORMATION AND GEOMATICS A FRAMEWORK AND REFERENCE MODEL Kian FADAIE Canada Centre for Remote Sensing Natural Resources Canada Fadaie@nrcan.gc.ca Paper number 1734 KEY WORDS: ISO/TC211,
More informationThis is a preview - click here to buy the full publication ICS ISBN
IEC 62341-5-2 Edition 2.0 2019-03 REDLINE VERSION colour inside Organic light emitting diode (OLED) displays Part 5-2: Mechanical endurance testing methods INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS
More informationIEC PROJETOS EM VOTAÇÃO
IEC PROJETOS EM VOTAÇÃO IEC/TC 10 - Fluids for electrotechnical applications. ATÉ 25 DE JULHO DE 2014 IEC 60599 Ed.3: Mineral oil-impregnated electrical equipment in service - Guide to the interpretation
More informationREPUBLIC OF LIBERIA BUREAU OF MARITIME AFFAIRS
REPUBLIC OF LIBERIA BUREAU OF MARITIME AFFAIRS Marine Notice INS-004 Rev. 4/05 TO: SUBJECT: ALL SHIPOWNERS, OPERATORS, MASTERS AND OFFICERS OF MERCHANT SHIPS, AND AUTHORIZED CLASSIFICATION SOCIETIES Operational/Safety
More informationRecent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees
INTERNATIONAL ELECTROTECHNICAL COMMISSION Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees Don Heirman presenting for Robert Sitzmann (TC 62) APEMC symposium
More informationNEWS STANDARDS: 2017/01
NEWS STANDARDS: 2017/01 IEC 60050-723:1997/AMD2:2016 - Amendment 1 - International electrotechnical vocabulary - Part 723: Broadcasting: Sound, television, data IEC 60794-2-22:2016 - Optical fibre cables
More informationNumerical Standards Listing
Numerical Standards Listing ISA-RP2.1-1978 - Manometer Tables ISA-5.1-1984 (R1992) - Instrumentation Symbols and Identification (Formerly ANSI/ISA-5.1-1984 [R1992]) ISA-5.2-1976 (R1992) - Binary Logic
More informationNanotechnology-Based Gas Sensors
Nanotechnology-Based Gas Sensors Applications include: Detection of flammable gases for the petrochemical industry Quality control by the chemical industry Methane detection for the mine safety industry
More informationRESOLUTION MSC.339(91) (adopted on 30 November 2012) AMENDMENTS TO THE INTERNATIONAL CODE FOR FIRE SAFETY SYSTEMS (FSS CODE)
THE MARITIME SAFETY COMMITTEE, RECALLING Article 28(b) of the Convention on the International Maritime Organization concerning the functions of the Committee, NOTING resolution MSC.98(73), by which it
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 80601-2-13 First edition 2011-08-01 Medical electrical equipment Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation Appareils
More informationTHE REPUBLIC OF LIBERIA LIBERIA MARITIME AUTHORITY
Office of Deputy Commissioner of Maritime Affairs THE REPUBLIC OF LIBERIA LIBERIA MARITIME AUTHORITY Marine Notice INS-004 Rev. 06/12 TO: SUBJECT: ALL SHIPOWNERS, OPERATORS, MASTERS AND OFFICERS OF MERCHANT
More informationIEC NORMAS PUBLICADAS. As normas ISO/IEC já estão relacionadas em normas ISO Publicadas
IEC NORMAS PUBLICADAS As normas ISO/IEC já estão relacionadas em normas ISO Publicadas TC 1 - Terminology IEC 60050-614:2016 - International electrotechnical vocabulary - Part 614: Generation, transmission
More informationNumerical Standards Listing
ISA-RP2.1-1978 - Manometer Tables Numerical Standards Listing ANSI/ISA-5.1-1984 (R1992) - Instrumentation Symbols and Identification ANSI/ISA-5.2-1976 (R1992) - Binary Logic Diagrams for Process Operations
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD IEC 60092-502 Fifth edition 1999-02 Electrical installations in ships Part 502: Tankers Special features Installations électriques à bord des navires Partie 502: Navires-citernes
More informationPlastics - Sulfone polymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO :2009)
Nr. Standard reference Title 1 EN 12572-1:2017 2 EN 16584-2:2017 3 EN 16584-1:2017 4 EN 16584-3:2017 Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection
More informationRecent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees
INTERNATIONAL ELECTROTECHNICAL COMMISSION Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees Don Heirman presenting for Robert Sitzmann (TC 62) APEMC symposium
More informationISO INTERNATIONAL STANDARD. Hydrogen generators using fuel processing technologies Part 1: Safety
INTERNATIONAL STANDARD ISO 16110-1 First edition 2007-03-15 Hydrogen generators using fuel processing technologies Part 1: Safety Générateurs d'hydrogène utilisant les technologies de traitement du carburant
More informationISO NORMAS PUBLICADAS
ISO NORMAS PUBLICADAS ISO/JTC 1 - Information technology ISO/IEC/IEEE 8802-11:2012/Amd 5:2015 - ISO/IEC/IEEE 8802-11:2012/Amd 4:2015 ISO/IEC 11770-3:2015 - Information technology - Security techniques
More informationINTERNATIONAL STANDARD
IEC 61892-7 INTERNATIONAL STANDARD Edition 2.0 2007-11 Mobile and fixed offshore units Electrical installations Part 7: Hazardous areas INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE XA ICS 47.020.60
More informationThe improved Thesaurus and Classification tools containing all these changes will be available in January in time for the first update of 2018.
2018 Inspec Thesaurus and Classification Code Changes About Thesaurus and Classification Codes The Inspec Thesaurus and Classification scheme are valuable search tools to help you refine your search results.
More informationElenco delle Norme CENELEC rese disponibili nel mese di Marzo 2017
Elenco delle Norme CENELEC rese disponibili nel mese di Marzo 2017 EN 140401-802:2007/A3:2017 DAV: 2017-03-17 DOA: 2017-07-23 2018-01-23 2020-01-23 WI: 61589 EN 140401-803:2007/A3:2017 DAV: 2017-03-17
More informationISO INTERNATIONAL STANDARD. Fluid power systems O-rings Part 5: Suitability of elastomeric materials for industrial applications
INTERNATIONAL STANDARD ISO 3601-5 First edition 2002-07-01 Fluid power systems O-rings Part 5: Suitability of elastomeric materials for industrial applications Transmissions hydrauliques et pneumatiques
More informationSafety Standards for Electronic Products
Safety Standards for Electronic Products The following are some of the safety standards for all types of electronic products. ANSI C95.3:1972 / Techniques & instrumentation for measurement of potentially
More informationNr. Standard reference
Nr. Standard reference 1 EN 54-5:2017 2 EN ISO 5395-3:2013/A1:2017 3 EN 12574-1:2017 4 EN 16573:2017 Title Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors Garden equipment
More informationISO 20053:2017 * Ships and marine technology Marine environment protection Specifications on design and selection of sorbents
Standards published New International Standards published between 01 September and 30 September 2017 * Available in nglish only ** French version of standard previously published in nglish only Price group
More informationUse case methodology - Part 2: Definition of the templates for use cases, actor list and requirements list 4 IEC 60836:2015 PRV
Nr. Standard reference Title 1 IEC TS 62239-1:2015 Process management for avionics - Management plan - Part 1: Preparation and maintenance of an electronic components management plan 2 IEC TS 62686-1:2015
More informationInternational Standards in process. CD registered. Rolling bearings. Road vehicles. Tyres, rims and valves
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More informationInternational and European standardization of Nanomaterials
International and European standardization of Nanomaterials Jean-Marc Aublant LNE - France What about standardization of nanotechnologies? Retrospect CEN/BT/WG 166 Nanotechnologies was established in March
More informationIEC PROJETOS EM VOTAÇÃO SETEMBRO E OUTUBRO. IEC ED1 - Rotating electrical machines - Part 23: Repair, overhaul and reclamation
IEC PROJETOS EM VOTAÇÃO SETEMBRO E OUTUBRO IEC/TC 2 - Rotating machinery IEC 60034-23 ED1 - Rotating electrical machines - Part 23: Repair, overhaul and reclamation IEC 60034-14 ED4 - Rotating electrical
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61892-2 Edition 2.0 2012-03 Mobile and fixed offshore units Electrical installations Part 2: System design INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE XC ICS 47.020.60
More informationManager Other (Specify) Gross Tonnage: Main Propulsion (kw): Generating Power (kw):
PLEASE READ THE ATTACHED IMO RESOLUTION A.1047(27) BEFORE COMPLETING THIS FORM Maritime Authority of the Cayman Islands 133 Elgin Avenue P.O. Box 2256 Grand Cayman KY1-1107 Cayman Islands Tel: +1 345 949
More informationVydané medzinárodné normy a iné publikácie IEC za obdobie od do
Vydané medzinárodné normy a iné publikácie IEC za obdobie od 1. 3. 2015 do 31.3. 2015 IEC TC/SC Dokument Dátum vydania Názov CIS/F CISPR 15:2013+AMD1:2015 CSV 2015-03-27 Limits and methods of measurement
More informationEpoxy coating (heeavy duty) of ductile iron fittings and accessories requirements and testing method
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More informationGuide for addressing chemicals in standards for consumer-relevant products 2 CEN/CLC Guide 25:2017
Nr. Standard reference Title 1 CEN Guide 16:2017 Guide for addressing chemicals in standards for consumer-relevant products 2 CEN/CLC Guide 25:2017 The concept of Partnership with European Organisations
More informationPOSITION PAPER ON WATER MIST FOR FIRE FIGHTING APPLICATIONS
FIRE EXTINGUISHING INSTALLATIONS SECTION POSITION PAPER ON WATER MIST FOR FIRE FIGHTING APPLICATIONS Version 1 29-09-04 0 Eurofeu position paper on water mist for fire fighting applications 1 Scope The
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61892-6 First edition 1999-02 Mobile and fixed offshore units Electrical installations Part 6: Installation Unités mobiles et fixes en mer Installations électriques Partie 6:
More informationon board with solutions
ABOUT US Garant Safety is a part of Garant Group. Garant Safety is a safety and firefighting equipment supplier and service station, certified to conduct periodic equipment inspections and tests, as well
More informationCommon Items that May Be Hazardous Descriptions that Indicate Dangerous Goods (Courtesy of UPS)
Common Items that May Be Hazardous Descriptions that Indicate Dangerous Goods (Courtesy of UPS) Watch for any of the following descriptions that could indicate Dangerous Goods or Hazardous Materials: Acidic
More informationCHECKLISTS ORGANIZED BY EXPOSURE CATEGORIES (SPECIFIC AGENTS OR HAZARDS; MIXTURES; MULTIMEDIA; OTHER (PROCEDURES, PROGRAMS)
CHECKLISTS ORGANIZED BY EXPOSURE CATEGORIES (SPECIFIC AGENTS OR HAZARDS; MIXTURES; MULTIMEDIA; OTHER (PROCEDURES, PROGRAMS) CHECKLIST TOPIC/TITLE PAGE NUMBERS Biological Agents Blood (Handling and Disposal)
More informationInternational Standards in process
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More informationVYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do Označenie dokumentu Názov v angličtine Dop Dow Technická komisia
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 3. 2018 do 31. 3. 2018 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
More informationSupplement to ISO Focus+
Update Supplement to Focus+ August 2013 International Standards in process An International Standard is the result of an agreement between the member bodies of. A first important step towards an International
More informationApplication of ISO for assessment of identity managementrelated risk ISO/IEC JTC 1/SC 27/WG days
Alert TimeframAReference Document title Developing committee VA Registration da Current Stage date Time since current stage Warning SDT 36 ISO/IEC NP 27555 Establishing a PII deletion concept in organizations
More information