ISO NORMAS PUBLICADAS. ISO/IEC TR : Information technology - Future Network - Problem statement and requirements - Part 5: Security.
|
|
- Prudence Blankenship
- 6 years ago
- Views:
Transcription
1 ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC TR : Information technology - Future Network - Problem statement and requirements - Part 5: Security. ISO/IEC TR : Information technology - Future Network - Problem statement and requirements - Part 2: Naming and addressing. ISO/IEC 90003: Software engineering - Guidelines for the application of ISO 9001:2008 to computer software. ISO/IEC : Information technology - Storage management - Part 7: Host Elements. ISO/IEC : Information technology - Storage management - Part 8: Media Libraries. ISO/IEC : Information technology - Storage management - Part 6: Fabric. ISO/IEC : Information technology - Storage management - Part 5: File systems. ISO/IEC : Information technology - Metamodel framework for interoperability (MFI) - Part 10: Core model and basic mapping. ISO/IEC : Information technology - User interfaces - Universal remote console - Part 6: Web service integration. ISO/IEC : Information technology - User interfaces - Universal remote console - Part 2: User interface socket description. ISO/IEC : Information technology - User interfaces - Universal remote console - Part 5: Resource description. ISO/IEC : Information technology - User interfaces - Universal remote console - Part 4: Target description. ISO/IEC : Information technology - User interfaces - Universal remote console - Part 1: General framework. ISO/TC 8 - Ships and marine technology ISO/PAS 19697: Ships and marine technology - Navigation and ship operations - Electronic inclinometers. ISO/TC 17 - Steel
2 ISO 4996: Hot-rolled steel sheet of high yield stress structural quality. ISO/TC 20 - Aircraft and space vehicles ISO 15845: Aircraft ground equipment - Boarding vehicle for persons with reduced mobility - Functional and safety requirements. ISO/TC 21 - Equipment for fire protection and fire fighting ISO : Fire detection and alarm systems - Part 8: Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor. ISO : Fire protection - Automatic sprinkler systems - Part 12: Requirements and test methods for grooved-end components for steel pipe systems. ISO/TC 23 - Tractors and machinery for agriculture and forestry ISO : Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers. ISO : Agricultural irrigation equipment - Irrigation valves - Part 5: Control valves. ISO : Radio frequency identification of animals - Part 5: Procedure for testing the capability of RFID transceivers of reading ISO and ISO transponders. ISO/TC 27 - Solid mineral fuels ISO/TS 18806: Solid mineral fuels - Determination of Chlorine content. ISO/ TC 28 - Petroleum products and related products of synthetic or biological origin ISO 26422: Petroleum and related products - Determination of shear stability of lubricating oils containing polymers - Method using a tapered roller bearing. ISO/TC 29 - Small tools ISO : Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools. ISO : Hollow taper interface with flange contact surface -- Part 4: Dimensions of receivers for stationary tools. ISO 3919:2005/Amd 1: Coated abrasives - Flap wheels with shaft.
3 ISO/TC 34 - Food products ISO 11136: Sensory analysis - Methodology - General guidance for conducting hedonic tests with consumers in a controlled area. ISO/TC 37 - Terminology and other language and content resources ISO : Language resource management - Semantic annotation framework - Part 7: Spatial information (ISOspace). ISO/TC 39 - Machine tools ISO : Test conditions for machining centres - Part 6: Accuracy of speeds and interpolations. ISO/TC 45 - Rubber and rubber products ISO 2005: Rubber latex, natural, concentrate - Determination of sludge content. ISO/TC 67 - Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ISO 12736: Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures. ISO : Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure. ISO/TC 70 - Internal combustion engines ISO : Reciprocating internal combustion engines - Vocabulary of components and systems - Part 11: Fuel systems. ISO/TC 84 - Devices for administration of medicinal products and catheters ISO : Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems. ISO/TC 92 - Fire safety ISO 17554: Reaction to fire tests - Mass loss measurement.
4 ISO :1996/Amd 1: Fire resistance tests - Fire dampers for air distribution systems - Part 1: Test method. ISO :2001/Amd 1: Specific performance requirement for thermal release mechanism based upon performance of thermal release mechanism used in ISO test specimen. ISO/TC Industrial trucks ISO : Industrial trucks - Verification of stability - Part 22: Lateral- and frontstacking trucks with and without elevating operator position. ISO/TC Graphic technology ISO 15341: Graphic technology - Method for radius determination of printing cylinders. ISO : Graphic technology - Extensible metadata platform (XMP) - Part 2: Description of XMP schemas using RELAX NG. ISO 16760: Graphic technology - Prepress data exchange - Preparation and visualization of RGB images to be used in RGB-based graphics arts workflows. ISO/TC Graphical symbols ISO 7010:2011/Amd 6: Graphical symbols - Safety colours and safety signs - Registered safety signs. ISO/TC Water quality ISO : Water quality - Sampling - Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling. ISO/TC Processes, data elements and documents in commerce, industry and administration ISO : Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 2) - Part 10: Syntax service directories. ISO/TC Document management applications ISO : Electronic document management - Vocabulary - Part 2: Workflow management.
5 ISO : Document management - 3D use of Product Representation Compact (PRC) format - Part 1: PRC ISO : Document management applications - Electronic document file format enhancement for accessibility - Part 1: Use of ISO (PDF/UA-1). ISO/TC Optics and photonics ISO 8039: Microscopes - Values, tolerances and symbols for magnification. ISO/TC Assistive products for persons with disability ISO : Wheelchairs - Resistance to ignition of non-integrated seat and back support cushions - Part 10: Requirements and test methods. ISO/TC Jewellery ISO 15096: Jewellery - Determination of silver in 999 0/00 silver jewellery alloys - Difference method using ICP-OES. ISO/TC Safety of toys ISO : Safety of toys - Part 1: Safety aspects related to mechanical and physical properties. ISO/TC Automation systems and integration ISO : Industrial automation systems and integration - Product data representation and exchange - Part 59: Integrated generic resource - Quality of product shape data. ISO : Industrial automation systems and integration - Product data representation and exchange - Part 42: Integrated generic resource: Geometric and topological representation. ISO/TS : Industrial automation systems and integration - Product data representation and exchange - Part 409: Application module: AP209 multidisciplinary analysis and design. ISO : Industrial automation systems and integration - Product data representation and exchange - Part 101: Integrated application resource: Draughting. ISO : Industrial automation systems and integration - Product data representation and exchange - Part 41: Integrated generic resource: Fundamentals of product description and support.
6 ISO : Industrial automation systems and integration - Product data representation and exchange - Part 44: Integrated generic resource: Product structure configuration. ISO : Industrial automation systems and integration - Product data representation and exchange - Part 45: Integrated generic resource: Material and other engineering properties. ISO/TS : Industrial automation systems and integration - Product data representation and exchange - Part 410: Application module: AP210 electronic assembly interconnect and packaging design. ISO : Industrial automation systems and integration - Product data representation and exchange - Part 105: Integrated application resource: Kinematics. ISO : Industrial automation systems and integration - Product data representation and exchange - Part 47: Integrated generic resource: Shape variation tolerances. ISO : Industrial automation systems and integration - Product data representation and exchange - Part 518: Application interpreted construct: Mechanical design shaded presentation. ISO : Industrial automation systems and integration - Product data representation and exchange - Part 522: Application interpreted construct: Machining features. ISO/TS : Industrial automation systems and integration - Product data representation and exchange - Part 442: Application module: AP242 managed model based 3D engineering. ISO/TS : Industrial automation systems and integration - Product data representation and exchange - Part 3001: Business object model: Managed model based 3d engineering. ISO/TS : Industrial automation systems and integration - Product data representation and exchange - Part 1127: Application module: File identification. ISO/TS : Industrial automation systems and integration - Product data representation and exchange - Part 1142: Application module: Requirement view definition relationship. ISO/TS : Industrial automation systems and integration - Product data representation and exchange - Part 1603: Application module: Analytical model. ISO/TS : Industrial automation systems and integration - Product data representation and exchange - Part 1642: Application module: Assembly module usage view. ISO/TS : Industrial automation systems and integration - Product data representation and exchange - Part 1650: Application module: Bare die. ISO/TS : Industrial automation systems and integration - Product data representation and exchange - Part 1686: Application module: Interconnect module usage view.
7 ISO/TS : Industrial automation systems and integration - Product data representation and exchange - Part 1698: Application module: Layered interconnect module design. ISO/TS : Industrial automation systems and integration - Product data representation and exchange - Part 1706: Application module: Non feature shape element. ISO/TS : Industrial automation systems and integration - Product data representation and exchange - Part 1707: Application module: Package. ISO/TS : Industrial automation systems and integration - Product data representation and exchange - Part 1718: Application module: Layered interconnect simple template. ISO/TS : Industrial automation systems and integration - Product data representation and exchange - Part 1803: Application module: Process plan. ISO/TS : Industrial automation systems and integration - Product data representation and exchange - Part 1636: Application module: Assembly module design. ISO/TS : Industrial automation systems and integration - Product data representation and exchange - Part 1051: Application module: Geometric tolerance. ISO : Industrial automation systems and integration - Product data representation and exchange - Part 242: Application protocol: Managed model-based 3D engineering. ISO : Industrial automation systems and integration - Product data representation and exchange - Part 209: Application protocol: Multidisciplinary analysis and design. ISO : Industrial automation systems and integration -- Product data representation and exchange - Part 210: Application protocol: Electronic assembly, interconnect and packaging design. ISO :1998/Cor 1: Industrial automation systems and integration - Parts library - Part 20: Logical resource: Logical model of expressions. ISO :2002/Cor 2: Industrial automation systems and integration - Product data representation and exchange - Part 50: Integrated generic resource: Mathematical constructs. ISO :2011/Cor 1: Industrial automation systems and integration - Product data representation and exchange - Part 52: Integrated generic resource: Mesh-based topology. ISO :2000/Cor 2: Industrial automation systems and integration - Product data representation and exchange - Part 104: Integrated application resource: Finite element analysis. ISO :2005/Cor 2:2014 -Industrial automation systems and integration - Product data representation and exchange - Part 108: Integrated application resource: Parameterization and constraints for explicit geometric product models.
8 ISO :2007/Cor 2:2014 -Industrial automation systems and integration - Product data representation and exchange - Part 111: Integrated application resource : Elements for the procedural modelling of solid shapes. ISO :2004/Cor 2: Industrial automation systems and integration - Product data representation and exchange - Part 109: Integrated application resource: Kinematic and geometric constraints for assembly models. ISO/TC Small craft ISO 13297: Small craft - Electrical systems - Alternating current installations. ISO/TC Environmental management ISO/TS 14072: Environmental management - Life cycle assessment - Requirements and guidelines for organizational life cycle assessment. ISO/TC Clinical laboratory testing and in vitro diagnostic test systems ISO/TS : In vitro diagnostic test systems - Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens - Part 1: General requirements, terms and definitions. ISO/TC Dimensional and geometrical product specifications and verification ISO 2692: Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR). ISO/TC Health informatics ISO/TS 13131: Health informatics - Telehealth services - Quality planning guidelines. IEC/TR : Application of risk management for IT-networks incorporating medical devices - Part 2-5: Application guidance - Guidance for distributed alarm systems. ISO/TR : Health informatics - IHE global standards adoption - Part 3: Deployment. ISO/TC Timber ISO 17959: General requirements for solid wood flooring.
9 ISO : Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 3: Determination of ultimate strength in static bending. ISO : Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 4: Determination of modulus of elasticity in static bending. ISO : Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 6: Determination of ultimate tensile stress parallel to grain. ISO : Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 7: Determination of ultimate tensile stress perpendicular to grain. ISO/TC Floor coverings ISO 24338: Laminate floor coverings - Determination of abrasion resistance. ISO/TC Geosynthetics ISO 13427: Geosynthetics - Abrasion damage simulation (sliding block test). ISO/TC Societal security ISO 22315: Societal security - Mass evacuation - Guidelines for planning. ISO/TC Energy Management ISO 50015: Energy management systems - Measurement and verification of energy performance of organizations - General principles and guidance. ISO 50006: Energy management systems - Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI) - General principles and guidance. ISO 50004: Energy management systems - Guidance for the implementation, maintenance and improvement of an energy management system. ISO/PC Compliance management systems ISO 19600: Compliance management systems - Guidelines.
ISO NORMAS PUBLICADAS JANEIRO E FEVEREIRO
ISO NORMAS PUBLICADAS JANEIRO E FEVEREIRO ISO/JTC 1 - Information technology ISO/IEC 9075-1:2016 - Information technology -- Database languages -- SQL -- Part 1: Framework (SQL/Framework) ISO/IEC 9075-2:2016
More informationISO NORMAS PUBLICADAS. ISO/IEC 10646: Information technology - Universal Coded Character Set (UCS).
ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC 10646:2014 - Information technology - Universal Coded Character Set (UCS). ISO/IEC 24771:2014 - Information technology - Telecommunications
More informationG Calculation of perforation efficiency ISO/TR 24498: 2006 Paper, board and pulps Estimation of uncertainty for test methods C
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More informationISO NORMAS PUBLICADAS
ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC 29182-7:2015 - Information technology - Sensor networks: Sensor Network Reference Architecture (SNRA) - Part 7: Interoperability guidelines.
More informationISO NORMAS PUBLICADAS. ISO/IEC 19845: Information technology - Universal Business Language
ISO NORMAS PUBLICADAS ISO/JTC 1 - Information technology ISO/IEC 19845:2015 - Information technology - Universal Business Language ISO/IEC 23001-12:2015 - Information technology - MPEG systems technologies
More informationISO NORMAS PUBLICADAS. ISO/IEC : Information technology -- Security techniques -- Anonymous digital signatures -- Part 1: General
ISO NORMAS PUBLICADAS ISO/JTC - Information technology ISO/IEC 20008-1:2013 - Information technology -- Security techniques -- Anonymous digital signatures -- Part 1: General ISO/IEC 14496-3:2009/Amd 4:2013
More informationISO PROJETOS EM VOTAÇÂO. ISO/IEC/IEEE DIS Systems and software engineering - System life cycle processes
ISO PROJETOS EM VOTAÇÂO ISO/IEC JTC 1 - Information technology ISO/IEC/IEEE DIS 15288 - Systems and software engineering - System life cycle processes ISO/IEC 15444-1:2004/DAmd 8 - Information technology
More informationIEC NORMAS PUBLICADAS. As normas ISO/IEC já estão relacionadas em normas ISO Publicadas
IEC NORMAS PUBLICADAS As normas ISO/IEC já estão relacionadas em normas ISO Publicadas TC 1 - Terminology IEC 60050-614:2016 - International electrotechnical vocabulary - Part 614: Generation, transmission
More informationTissue paper and tissue products Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method
International Standards in process An International Standard is the result of an agreement between the member bodies of. A first important step towards an International Standard takes the form of a committee
More informationInstructions for use of products by consumers. ISO 4032:2012 Hexagon regular nuts (style 1) Product grades A and B C
Standards published New International Standards published between 01 December and 31 December 2012 * Available in English only ** French version of standard previously published in English only Price group
More informationNr. Standard reference Title 1 CEN/CLC Guide 34:2016 CEN and CENELEC representation in official meetings
Nr. Standard reference Title 1 CEN/CLC Guide 34:2016 CEN and CENELEC representation in official meetings 2 EN 47:2016 3 EN 204:2016 4 EN 205:2016 5 EN 350:2016 6 EN 384:2016 7 EN ISO 389-7:2005/A1:2016
More informationStandardization Programme ( ) Building & Construction Standards Committee
Standardization Programme (2012-2013) Building & Construction Standards Committee Projects Title 2012 2013 Jul Aug Sep Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1 EN 12811: 2 EN 197-1:2011
More informationWork Programme CEN/TC 251 Health informatics
Secretariat: Nederlands Normalisatie-instituut doc.nr. Vlinderweg 6 P.O. box 5059 CEN/TC 251 2623 AX Delft, 2600 GB Delft, NL NL Netherlands Netherlands telephone: +31 15 2 690 313 date 2008-05-15 total
More informationTextiles - Tests for colour fastness - Part B03: Colour fastness to weathering: Outdoor exposure (ISO 105-B03:2017) 3 EN ISO 287:2017
Nr. Standard reference Title 1 EN 419212-2:2017 Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 2: Signature and Seal Services 2 EN ISO
More informationISO PROJETOS EM VOTAÇÂO
ISO PROJETOS EM VOTAÇÂO ISO/IEC JTC 1 - Information Technology ATÉ 04 DE MARÇO DE 2015. ISO/IEC DIS 29341-12-1 (Ed 2) - Information technology - UPnP Device Architecture - Part 12-1: Remote User Interface
More information1 EN : EN : EN 71-7:2014+A1: EN 302-2: EN 302-3: EN 303-1: EN : EN ISO :2017
Nr. Standard reference Title 1 EN 419212-1:2017 2 EN 419212-3:2017 3 EN 71-7:2014+A1:2017 4 EN 302-2:2017 5 EN 302-3:2017 6 EN 303-1:2017 7 EN 1459-1:2017 8 EN ISO 1833-4:2017 9 EN ISO 1833-7:2017 10 EN
More informationISO NORMAS PUBLICADAS
ISO NORMAS PUBLICADAS ISO/JTC 1 - Information technology ISO/IEC 14651:2016 - Information technology - International string ordering and comparison - Method for comparing character strings and description
More informationMauritian Standards/Amendments Published in 2013
Mauritian Standards/Amendments Published in 2013 Reference Title 2013 Notice No. Date Gazetted 2013 1 R MS 200:2013 Energy efficiency and labelling requirements Household room air conditioners 2 MS 207:2013
More informationISO NORMAS PUBLICADAS. ISO/IEC : Information technology - Home network resource management - Part 3: Management application.
ISO NORMAS PUBLICADAS ISO/JTC 1 - Information technology ISO/IEC 30100-3:2016 - Information technology - Home network resource management - Part 3: Management application. ISO/IEC 30100-2:2016 - Information
More informationIEC NORMAS PUBLICADAS. As normas ISO/IEC já estão relacionadas em normas ISO Publicadas
IEC NORMAS PUBLICADAS As normas ISO/IEC já estão relacionadas em normas ISO Publicadas IEC/TC 1 - Terminology IEC 60050-161-am5 ed1.0 (2015-02) - Amendment 5 - International Electrotechnical Vocabulary
More informationISO 20053:2017 * Ships and marine technology Marine environment protection Specifications on design and selection of sorbents
Standards published New International Standards published between 01 September and 30 September 2017 * Available in nglish only ** French version of standard previously published in nglish only Price group
More informationNr. Standard reference Title 1 EN 54-28:2016. Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors
Nr. Standard reference Title 1 EN 54-28:2016 Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors 2 EN 59:2016 Glass reinforced plastics - Determination of indentation
More informationISO and health. Great things happen when the world agrees.
ISO and health Great things happen when the world agrees. We are ISO, the International Organization for Standardization 162 * members 21 133 * International Standards We are a private, non-governmental,
More informationCHEMICALS AND CONSUMER PRODUCTS
UGANDA NATIONAL BUREAU OF STANDARDS (UNBS) STANDARDS DEPARTMENT STANDARDS DEVELOPMENT WORK PROGRAM January to June 2018 Proposed Title Edition Number ICS Number Standard Number Stage Stage Update Date
More informationIEC NORMAS PUBLICADAS SETEMBRO E OUTUBRO DE 2018
IEC NORMAS PUBLICADAS SETEMBRO E OUTUBRO DE 2018 IEC/TC 2 - Rotating machinery IEC 60034-14:2018 - Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56
More informationISO NORMAS PUBLICADAS
ISO NORMAS PUBLICADAS ISO/JTC 1 - Information technology ISO/IEC/IEEE 8802-11:2012/Amd 5:2015 - ISO/IEC/IEEE 8802-11:2012/Amd 4:2015 ISO/IEC 11770-3:2015 - Information technology - Security techniques
More informationISO/TC 211 GEOGRAPHIC INFORMATION AND GEOMATICS A FRAMEWORK AND REFERENCE MODEL
ISO/TC 211 GEOGRAPHIC INFORMATION AND GEOMATICS A FRAMEWORK AND REFERENCE MODEL Kian FADAIE Canada Centre for Remote Sensing Natural Resources Canada Fadaie@nrcan.gc.ca Paper number 1734 KEY WORDS: ISO/TC211,
More informationISO NORMAS PUBLICADAS
ISO NORMAS PUBLICADAS ISO/JTC - Information technology ISO/IEC 29182-3:2014 - Information technology -- Sensor networks: Sensor Network Reference Architecture (SNRA) -- Part 3: Reference architecture views
More informationISO PROJETOS EM VOTAÇÂO NOVEMBRO E DEZEMBRO DE 2016
ISO PROJETOS EM VOTAÇÂO NOVEMBRO E DEZEMBRO DE 2016 ISO/JTC1 Information Technology ATÉ 22 DE DEZEMBRO DE 2016 ISO/IEC DIS 17203 (Ed 2) - Information technology -- Open Virtualization Format (OVF) specification
More informationVydané medzinárodné normy a iné publikácie IEC za obdobie od do
Vydané medzinárodné normy a iné publikácie IEC za obdobie od 1. 3. 2015 do 31.3. 2015 IEC TC/SC Dokument Dátum vydania Názov CIS/F CISPR 15:2013+AMD1:2015 CSV 2015-03-27 Limits and methods of measurement
More informationStandards for nanotechnologies
Standards for nanotechnologies Dr Peter Hatto, Chairman ISO TC 229, CEN TC 352 and BSI NTI/1 Nanotechnologies standardization committees Director of Research, IonBond Ltd Standards and standardization
More informationNumerical Standards Listing
Numerical Standards Listing ISA-RP2.1-1978 - Manometer Tables ISA-5.1-1984 (R1992) - Instrumentation Symbols and Identification (Formerly ANSI/ISA-5.1-1984 [R1992]) ISA-5.2-1976 (R1992) - Binary Logic
More informationBSOL Modules EC Directives
BSOL Modules EC Directives Module Title 90-396-EEC 94-9-EC 00-9-EC 89-106-EEC 89-339-EEC 93-15-EEC 95-16-EC 73-23-EEC Appliance Burning Equipment & Protective Cableway Installations Construction Electromagnetic
More informationHexagon bolts with flange Small series Product grade A E. Corrugated fibreboard Determination of single sheet thickness E
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More informationISO NORMAS PUBLICADAS JULHO E AGOSTO
ISO NORMAS PUBLICADAS JULHO E AGOSTO ISO/JTC 1 - Information technology ISO/IEC 29341-7-11:2015 - Information technology - UPnP Device Architecture - Part 7-11: Lighting Device Control Protocol - Switch
More informationNr. Standard reference
Nr. Standard reference 1 EN 54-5:2017 2 EN ISO 5395-3:2013/A1:2017 3 EN 12574-1:2017 4 EN 16573:2017 Title Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors Garden equipment
More informationRolling bearings Radial bearings Dimensional and geometrical tolerances
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More informationIEC PROJETOS EM VOTAÇÃO SETEMBRO E OUTUBRO. IEC ED1 - Rotating electrical machines - Part 23: Repair, overhaul and reclamation
IEC PROJETOS EM VOTAÇÃO SETEMBRO E OUTUBRO IEC/TC 2 - Rotating machinery IEC 60034-23 ED1 - Rotating electrical machines - Part 23: Repair, overhaul and reclamation IEC 60034-14 ED4 - Rotating electrical
More informationSTANDARDS FROM EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN) 01 GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION. Title ICS1 Withdrawn
418 70 70/2016 I 2012 5 (CYS) STANDARDS FROM EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN) 01 GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION 736-2:2016 572-1:2012 Valves - Terminology - Part
More informationNumerical Standards Listing
ISA-RP2.1-1978 - Manometer Tables Numerical Standards Listing ISA-5.1-1984 (R1992) - Instrumentation Symbols and Identification (Formerly ANSI/ISA-5.1-1984 [R1992]) ISA-5.2-1976 (R1992) - Binary Logic
More informationNumerical Standards Listing
ISA-RP2.1-1978 - Manometer Tables Numerical Standards Listing ANSI/ISA-5.1-1984 (R1992) - Instrumentation Symbols and Identification ANSI/ISA-5.2-1976 (R1992) - Binary Logic Diagrams for Process Operations
More information* Csak angolul áll rendelkezésre. ** Korábban angol nyelven kiadott nemzetközi szabvány francia nyelvű kiadásának megjelenése.
NEMZETKÖZI SZABVÁNYKIADVÁNYOK ISO-szabványkiadványok A jegyzék az ISO Update 2015. márciusi kiadása alapján készült, és az ISO által kiadott, 2015. február 1-je és 28-a között megjelent új nemzetközi szabványkiadványokat
More informationVYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do Strana 1
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 12. 2016 do 31. 12. 2016 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo
More information1 Introduction. 2 General Pile Analysis Features. 2.1 Pile Internal Forces and Displacements
RSPile version 1.0 RSPile is a general pile analysis software for analyzing driven pile installation, axially loaded piles and laterally loaded piles. It is capable of computing the axial capacity for
More informationPlastics - Sulfone polymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO :2009)
Nr. Standard reference Title 1 EN 12572-1:2017 2 EN 16584-2:2017 3 EN 16584-1:2017 4 EN 16584-3:2017 Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection
More informationSession VI Smart safety systems
Session VI Smart safety systems September 09th, 2016 Kolkata Denzil D Enterprise security Building Technologies Siemens Ltd Siemens AG 2011. All rights reserved. Safety every where Hospital Office Residential
More informationISO, its current and future work and examples of where standards assist trade and sustainable development. Tokyo, 23 July 2009
ISO, its current and future work and examples of where standards assist trade and sustainable development By Rob Steele ISO Secretary-General Research Institute of Economy, Trade and Industry RIETI BBL
More informationIEC/TC IEC/TC44 IEC/TC44. Amd.1DC:201. Ed.3CD:2011. Ed.2.1:2008. Amd.1CDV ED.1: 一連番号 Ed.
IEC/TC44 20-3-7 IEC/TC44 IEC/TC44 6 TC44 TC44 TC44 TC44 TC44 WD, CD, CDV TC44 一連番号 IEC 60027-:992 (Ed.) (995 corrected and reprinted) Letter symbols to be used in electrical technology Part : General 2
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 80601-2-13 First edition 2011-08-01 Medical electrical equipment Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation Appareils
More informationFOLLOW UP SOURCE. Australian National Body / SA Report to TC46 Plenary 2015 Z41A. ISO TC 46 "Information and documentation"
ISO TC 46 "Information and documentation" Date: 2015-05-20 Z41A Doc. Number: N 2537 Assistant: Francisca Bien Aimé Direct line : + 33 (0 1 41 62 80 31 francisca.bienaime@afnor.org Your contact: Sabine
More informationGuide for addressing chemicals in standards for consumer-relevant products 2 CEN/CLC Guide 25:2017
Nr. Standard reference Title 1 CEN Guide 16:2017 Guide for addressing chemicals in standards for consumer-relevant products 2 CEN/CLC Guide 25:2017 The concept of Partnership with European Organisations
More informationVydané medzinárodné normy a iné publikácie IEC za obdobie od do
Vydané medzinárodné normy a iné publikácie IEC za obdobie od 1. 1. 2016 do 31. 1. 2016 IEC TC/SC Dokument Dátum vydania Názov ISO/IEC JTC 1/SC 6 ISO/IEC/IEEE 8802-1AX:2016 2016-01-14 Information technology
More informationIEC DLMS/COSEM seminar. Overview
IEC 62056 DLMS/COSEM seminar Overview EUW 2014, Amsterdam Győző Kmethy, DLMS UA, President Victoria Varjú, DLMS UA, Support manager Bas Roelofsen, DNV GL, Consultant 1 Agenda 13:00 Registration 13:30 DLMS/COSEM
More informationISO INTERNATIONAL STANDARD. Mobile elevating work platforms Design, calculations, safety requirements and test methods
INTERNATIONAL STANDARD ISO 16368 Second edition 2010-05-15 Mobile elevating work platforms Design, calculations, safety requirements and test methods Plates-formes élévatrices mobiles de personnel Conception,
More informationThis is a preview - click here to buy the full publication ICS ISBN
IEC 62341-5-2 Edition 2.0 2019-03 REDLINE VERSION colour inside Organic light emitting diode (OLED) displays Part 5-2: Mechanical endurance testing methods INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS
More informationIEC PROJETOS EM VOTAÇÃO
IEC PROJETOS EM VOTAÇÃO IEC/TC 10 - Fluids for electrotechnical applications. ATÉ 25 DE JULHO DE 2014 IEC 60599 Ed.3: Mineral oil-impregnated electrical equipment in service - Guide to the interpretation
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62341-5-2 Edition 2.0 2019-03 colour inside Organic light emitting diode (OLED) displays Part 5-2: Mechanical endurance test methods INTERNATIONAL ELECTROTECHNICAL COMMISSION
More informationDesign. Innovations in Integrated Control Systems
Design Innovations in Integrated Control Systems Halvard Foss Kongsberg Maritime AS October 17-18, 2006 Return to Session Directory Innovations in Integrated Control Systems Halvard Foss Kongsberg Maritime
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 072A Issue date 23 rd March 2018 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 17065:2012 to provide product conformity certification Newport Business Park New Port Road Ellesmere Port CH65 4LZ United Kingdom Contact:
More informationLIBRARY OF STANDARDS
LIBRARY OF STANDARDS 1 FP0 1 October 20 BFPA Library of Standards C O N T E N T S Page British standards prefix BS - European standards implemented as British standards (mandatory) prefix BS EN International
More informationNanotechnology-Based Gas Sensors
Nanotechnology-Based Gas Sensors Applications include: Detection of flammable gases for the petrochemical industry Quality control by the chemical industry Methane detection for the mine safety industry
More informationTECHNICAL PROGRAMME SECTION B: STANDARDS APPROVED
TECHNICAL PROGRAMME SECTION B: STANDARDS APPROV APPROV INTERNATIONAL RELATNESS SANS 164-1 SABS 164-1 -01-29 5.03 067-03 Plug and socket-outlet systems for household and similar purposes for use in South
More informationISO/TS TECHNICAL SPECIFICATION. Fire detection and alarm systems Part 9: Test fires for fire detectors
TECHNICAL SPECIFICATION ISO/TS 7240-9 First edition 2006-01-01 Fire detection and alarm systems Part 9: Test fires for fire detectors Systèmes de détection et d'alarme d'incendie Partie 9: Essais sur foyers
More informationE.Q.A. (IRELAND) LIMITED
15 Greenmount House, Greenmount Office Park, Harold's Cross, Dublin 6W Management Systems Certification Body Registration number: 5005 is accredited by the Irish National Board (INAB) to undertake certification
More informationStandards - Withdrawn The dates in brackets following the document number are the year of publication and the withdrawal date.
SANS 19 (2007) (2018-03-02) The inspection, testing and examination of mobile cranes Covers provisions for the inspection, testing and examination of mobile cranes in use. Does not cover the inspection,
More informationERGONOMICS STANDARDS AND TEXTS 2
ERGONOMICS STANDARDS AND TEXTS 2 Generic Guidance 2 Environmental 3 Control Centres and Offices 5 Vehicle Specific 6 Safe Design of Work 6 Workload, Situation Awareness and Reliability 6 Interface Design,
More informationElenco delle Norme CENELEC rese disponibili nel mese di Marzo 2017
Elenco delle Norme CENELEC rese disponibili nel mese di Marzo 2017 EN 140401-802:2007/A3:2017 DAV: 2017-03-17 DOA: 2017-07-23 2018-01-23 2020-01-23 WI: 61589 EN 140401-803:2007/A3:2017 DAV: 2017-03-17
More informationStandards Answers Panel
#COLOR19 Standards Answers Panel Don Schroeder Director Packaging Solutions Fujifilm Graphic Systems Division ISO TC130 USTAG, PPC, TAGA #COLOR19 A great deal of work goes into the development of standards
More informationRecent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees
INTERNATIONAL ELECTROTECHNICAL COMMISSION Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees Don Heirman presenting for Robert Sitzmann (TC 62) APEMC symposium
More informationE.Q.A. (IRELAND) LIMITED
Office A, Second Floor, Citywest Shopping Centre, Citywest Business Park, Dublin 24 Management Systems Certification Body Registration number: 5005 is accredited by the Irish National Board (INAB) to undertake
More informationNF MARK RIGID NON-PLASTICISED PVC PIPES AND FITTINGS
Mandated by CENTRE SCIENTIFIQUE ET TECHNIQUE DU BATIMENT Certifying Body 84 avenue Jean Jaurès Champs sur Marne F 77442 MARNE-LA-VALLEE Cedex 2 11 rue Francis de Pressensé F 93571 LA PLAINE SAINT DENIS
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-03-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 25.10.2017 to 24.10.2022 Holder of certificate: DMT
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 18758-2 First edition 2018-06 Mining and earth-moving machinery Rock drill rigs and rock reinforcement rigs Part 2: Safety requirements Engins d'exploitation minière et de terrassement
More informationISO INTERNATIONAL STANDARD. Fire detection and alarm systems Part 16: Sound system control and indicating equipment
INTERNATIONAL STANDARD ISO 7240-16 First edition 2007-07-01 Fire detection and alarm systems Part 16: Sound system control and indicating equipment Systèmes de détection et d'alarme d'incendie Partie 16:
More informationVYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 12. 2011 do 31. 12. 2011 DOP dátum vydania: dátum, dokedy musí byť EN prebraná na národnej úrovni vydaním identickej národnej normy alebo oznámením
More informationInternational Standards in process
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More informationRolling bearings Load ratings for hybrid bearings with rolling elements made of ceramic Part 2: Static load ratings
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More informationINTERNATIONAL STANDARD
IEC 61073-1 INTERNATIONAL STANDARD Edition 4.0 2009-01 Fibre optic interconnecting devices and passive components Mechanical splices and fusion splice protectors for optical fibres and cables Part 1: Generic
More informationIAS Accreditation Number UL International Germany GmbH Address Admiral Rosendahl Strasse 23 Neu Isenburg Germany
IAS Accreditation Number TL-437 Company Name Address Admiral Rosendahl Strasse 23 Neu Isenburg 63263 Germany Contact Name Ingmar Essert Telephone +4969489810234 Effective Date of Scope March 9, 2018 Accreditation
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11608-4 First edition 2006-03-15 Pen-injectors for medical use Part 4: Requirements and test methods for electronic and electromechanical pen-injectors Stylos-injecteurs à usage
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 63A Issue date 16 th June 2015 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44 (0)1244
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 5658-2 Second edition 2006-09-15 Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration Essais de réaction
More informationISO INTERNATIONAL STANDARD. Fire protection Automatic sprinkler system Part 9: Requirements and test methods for water mist nozzles
INTERNATIONAL STANDARD ISO 6182-9 First edition 2005-11-01 Fire protection Automatic sprinkler system Part 9: Requirements and test methods for water mist nozzles Protection contre l'incendie Systèmes
More informationAVOID CATASTROPHIC SITUATIONS: EXPERT FIRE AND GAS CONSULTANCY OPTIMIZES SAFETY
AVOID CATASTROPHIC SITUATIONS: EXPERT FIRE AND GAS CONSULTANCY OPTIMIZES SAFETY World-class services help reduce incidents, protect the environment, and keep people and plants safe White Paper PAGE 1 Introduction
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SIRA Certification Service Accredited to ISO/IEC 17065:2012 to provide product conformity Unit 6 Hawarden Industrial Park Hawarden Deeside
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Presley House Presley Way Crownhill Milton Keynes MK8 0ES United Kingdom Contact: Jeremy Hodge Tel: +44 (0) 1908 267300 Fax: +44 (0) 1908
More informationE-BOOK E BOOK FOR MOLD DESIGN PRODUCT CATALOG
20 October, 2017 E-BOOK E BOOK FOR MOLD DESIGN PRODUCT CATALOG Document Filetype: PDF 442.79 KB 0 E-BOOK E BOOK FOR MOLD DESIGN PRODUCT CATALOG Our hardworking molds set the standard in the industry by
More informationExplosion Protection Engineering Principles
Handbook of Fire and Explosion Protection Engineering Principles for Oil, Gas, Chemical and Related Facilities Second edition Dennis P. Nolan ELSEVIER AMSTERDAM BOSTON HEIDELBERG LONDON NEW YORK OXFORD
More informationHeating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners 4 EN 565:2017
Nr. Standard reference English title 1 EN 71-3:2013+A2:2017 Safety of toys - Part 3: Migration of certain elements 2 EN 71-14:2014+A1:2017 Safety of toys - Part 14: Trampolines for domestic use 3 EN 303-2:2017
More informationAVOID CATASTROPHIC SITUATIONS: EXPERT FIRE AND GAS CONSULTANCY OPTIMIZES SAFETY
AVOID CATASTROPHIC SITUATIONS: EXPERT FIRE AND GAS CONSULTANCY OPTIMIZES SAFETY World-class services help reduce incidents, protect the environment, and keep people and plants safe White Paper PAGE 1 Introduction
More informationPractical Distributed Control Systems (DCS) for Engineers & Technicians. Contents
Practical Distributed Control Systems (DCS) for Engineers & Technicians Contents Chapter 1 Introduction to Computer Based Control Systems 1 1.1 Introduction to computer based measurement and control systems
More informationMultistage Centrifugal Blowers
Multistage Centrifugal Blowers Multistage Centrifugal Blowers In order to meet all the requirements for air and gas applications, Ingersoll Rand provides a new generation of Hibon Multistage Centrifugal
More informationRecommendations for a Model Curriculum for a BS Degree in Fire Protection Engineering (FPE) April 15, 2010
Recommendations for a Model Curriculum for a BS Degree in Fire Protection Engineering (FPE) April 15, 2010 Society of Fire Protection Engineers (SFPE) Acknowledgement: SFPE would like to acknowledge the
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 126/02)
8.4.2016 EN Official Journal of the European Union C 126/13 Commission communication in the framework of the implementation of Directive 2014/34/EU of the European Parliament and of the Council on the
More information(Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION
8.4.2016 EN Official Journal of the European Union C 126/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework
More informationRecent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees
INTERNATIONAL ELECTROTECHNICAL COMMISSION Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees Don Heirman presenting for Robert Sitzmann (TC 62) APEMC symposium
More informationAnnex of the certificate (Page 1/1) Accreditation Scope
Accreditation Nr: ISO 22000:2005 Food Safety Management System Certification Address : E-Mail Website : kys@szutest.com.tr : www.szutest.com.tr Class/Category Food and Feed Processing - C Food and Feed
More informationVydané medzinárodné normy a iné publikácie IEC za obdobie od do
Vydané medzinárodné normy a iné publikácie IEC za obdobie od 1. 7. 2015 do 31. 7. 2015 IEC TC/SC Dokument Dátum vydania Názov CIS/A CISPR 16-1-1:2015 PRV 2015-07-10 Specification for radio disturbance
More informationResolutions from the Plenary Meeting of ISO/TC215 Health Informatics Kuopio Finland 27 May 2011
1 Resolutions from the Plenary Meeting of ISO/TC215 Health Informatics Kuopio Finland 27 May 2011 1. Resolved that ISO/TC215 accepts the report and resolutions of the Executive Council. 2. Resolved that
More information