TECHNICAL PROGRAMME SECTION B: STANDARDS APPROVED

Transcription

1 TECHNICAL PROGRAMME SECTION B: STANDARDS APPROV APPROV INTERNATIONAL RELATNESS SANS SABS Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 1: Conventional system, 16 A 250 V a.c SANS 268 SABS Wooden handles for beater picks, mattocks, and picks SANS Standard test method for water loss (from a mortar specimen) through liquid membraneforming curing compounds for concrete ASTM C 156: SANS Standard specification for liquid membraneforming compounds for curing concrete ASTM C309: SANS 514 SABS Immersion heaters for electric storage water heaters SANS 542 SABS Concrete roofing tiles SANS Reference materials - Good practise in using reference materials ISO Guide 33: SANS Guidance for the in-house preparation of quality control materials (QCMs) ISO Guide 80: SANS 660 SABS School furniture SANS Side upper leather SANS Cordovan and cordovan-type leathers for orthopaedic use SANS Vegetable-tanned harness and bridle leathers SANS 822 SABS Paper sizes and specific end-uses SANS 865 SABS Ambulance stretchers SANS Envelopes SANS SABS Symbolic safety signs Part 1: Standard signs and general requirements SANS Processed core-spun ducks B- 1 SABS STANDARDS TECHNICAL PROGRAMME APRIL

2 TECHNICAL PROGRAMME SECTION B: STANDARDS APPROV APPROV INTERNATIONAL RELATNESS SANS 1288 SABS Preservative-treated timber SANS Scholastic stationery SANS SABS Safety of luminaires Part 22: Luminaires for emergency lighting SANS Pig welfare SANS SABS Men's shoes with stuck-on outer soles Part 1: Flat lasted construction SANS SABS Men's shoes with stuck-on outer soles Part 2: California type construction SANS SABS Men's shoes with stuck-on outer soles Part 3: Moccasin type construction SANS Electricity payment systems Part 8: The management of secure modules NRS 009-8: SANS Corrugated stainless steel piping systems for hot and cold water supplies SANS Analysis of copper-chromium-arsenic (CCA) treated wood by X-ray fluorescence spectroscopy SANS 1713 SABS Electric cables - Medium-voltage aerial bundled conductors for voltages from 3,8/6,6 kv to 19/33 kv SANS Specification for an anti-bribery management system (ABMS) BS 10500: SANS 1799 SABS Watt-hour meters - AC electronic meters for active energy SANS 1851 SABS Lubricating grease SANS Live and chilled raw bivalve molluscs SANS 3001-AG Civil engineering test methods Part AG5: Sand equivalent value of fine aggregates B- 2 SABS STANDARDS TECHNICAL PROGRAMME APRIL

3 TECHNICAL PROGRAMME SECTION B: STANDARDS APPROV APPROV INTERNATIONAL RELATNESS SANS 3001-AG Civil engineering test methods Part AG12: Soundness of aggregates (magnesium sulphate method) SANS 3001-BT Civil engineering test methods Part BT20: Certification of a binder distributor SANS 3001-BT Civil engineering test methods Part BT22: Power and road speed indicator tests for a binder distributor SANS 3001-CO Civil engineering test methods Part CO3-2: Concrete durability index testing - Oxygen permeability test SANS 3001-CO Civil engineering test methods Part CO3-1: Concrete durability index testing - Preparation of test specimens SANS 3001-CO Civil engineering test methods Part CO3-3: Concrete durability index testing - Chloride conductivity test SANS 4001-BT Civil engineering specifications Part BT1: Penetration grade bitumen SANS Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings materials ISO : SANS Plain bearings - Hardness testing of bearing metals Part 2: Solid materials ISO : SANS Iron ores for blast furnace feedstocks - Determination of the reducibility by the rate of reduction index ISO 4695: SANS Iron ores for blast furnace feedstocks - Determination of low-temperature reductiondisintegration indices by static method Part 2: Reduction with CO and N2 ISO : SANS 5641 SABS SM Determination of wet and dry bursting strengths of stiffeners SANS 5642 SABS SM Determination of water absorption of inner soles and inner-sole material B- 3 SABS STANDARDS TECHNICAL PROGRAMME APRIL

4 TECHNICAL PROGRAMME SECTION B: STANDARDS APPROV APPROV INTERNATIONAL RELATNESS SANS 5650 SABS SM Determination of hardness of elastomeric material SANS 5962 SABS SM Determination of wet split tear strength of inner sole and runner materials (other than leather) SANS SABS SM Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 1: Tests on XLPE insulation SANS 6307 SABS SM Lime tests - Plasticity SANS 6581 SABS ISO Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings ISO 6581: SANS Performance standards in building - Contents and format of standards for evaluation of performance ISO 7162: SANS SABS ISO Acoustics - Audiometric test methods Part 3: Speech audiometry ISO : SANS Quality management - Customer satisfaction - Guidelines for complaints handling in organizations ISO 10002: SANS SABS The design and installation of earth electrodes SANS SABS Avoidance of hazards underground in collieries due to lightning SANS Iron ores for shaft direct-reduction feedstocks - Determination of the reducibility index, final degree of reduction and degree of metallization ISO 11258: SANS Electronic document management - Vocabulary - Part 2:Workflow management ISO : SANS Electronic imaging - Test target for scanning of office documents - Part 3:Test target for use in lower resolution applications ISO : SANS Interpreting - Guidelines for community interpreting ISO 13611: B- 4 SABS STANDARDS TECHNICAL PROGRAMME APRIL

5 TECHNICAL PROGRAMME SECTION B: STANDARDS APPROV APPROV INTERNATIONAL RELATNESS SANS SABS ISO Environmental management systems - Requirements with guidance for use ISO 14001: SANS Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition ISO 14065: SANS Document management applications - Electronic document file format enhancement for accessibility - Part 1:Use of ISO (PDF/UA-1) ISO : SANS SABS ISO/IEC Identification cards - Contactless integrated circuit(s) cards - Proximity cards Part 1: Physical characteristics ISO/IEC : SANS Identification cards - Contactless integrated circuit cards - Proximity cards Part 4: Transmission protocol ISO/IEC :2008 +AM 1:2012 +AM 2:2012 +AM 3:2013 +AM 4: SANS Document management - 3D use of Product Representation Compact (PRC) format Part 1: PRC ISO : SANS Conformity assessment - Requirements for bodies providing audit and certification of management systems Part 1: Requirements ISO/IEC : SANS Geographic information -- Reference model -- Part 1: Fundamentals ISO : SATS Geographic information -- Calibration and validation of remote sensing imagery sensors and data -- Part 1: Optical sensors ISO/TS : SANS Language resource management - Linguistic annotation framework (LAF) ISO 24612: SANS Language resources management - Multilingual information framework ISO 24616: SANS Language resource management - Semantic annotation framework (SemAF) - Part 2: Dialogue acts ISO : B- 5 SABS STANDARDS TECHNICAL PROGRAMME APRIL

6 TECHNICAL PROGRAMME SECTION B: STANDARDS APPROV APPROV INTERNATIONAL RELATNESS SANS Language resource management - Persistent identification and sustainable access (PISA) ISO 24619: SANS Information technology - Security techniques - Guidelines for cybersecurity ISO/IEC 27032: SATR Information technology - Biometrics - The use of biometric technology in commercial Identity Management applications and processes ISO/IEC TR 29144: SATR Information technology - Biometrics - Guide on designing accessible and inclusive biometric systems ISO/IEC TR 29194: SANS Safety of toys - Part 10: Organic chemical compounds - Sample preparation and extraction EN 71-10: SANS Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 31 access goods only lift EN 81-31: SANS Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility EN 81-41: SANS Textile floor coverings -- Determination of the side length, squareness and straightness of tiles EN 994: SANS Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels EN 13795:2011 +AM 1: SANS Criteria for design, management and control of maintenance services for buildings EN 15331: SANS SABS IEC Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation IEC : SANS SABS IEC Primary batteries Part 4: Safety of lithium batteries IEC : B- 6 SABS STANDARDS TECHNICAL PROGRAMME APRIL

7 TECHNICAL PROGRAMME SECTION B: STANDARDS APPROV APPROV INTERNATIONAL RELATNESS SANS SABS Safety Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances 6: SANS SABS Safety -Part 2-27: Particular requirements for appliances for skin exposure to optical radiation 27: SANS SABS Safety Part 2-34: Particular requirements for motor-compressors 34: +Cor 1: on Am 1 +AM 1: SANS SABS Safety Part 2-58: Particular requirements for commercial electric dishwashing machines 58: SANS SABS Safety Part 2-80: Particular requirements for fans 80: SANS SABS Safety Part 2-81: Particular requirements for foot warmers and heating mats 81: SANS Safety Part 2-101: Particular requirements for vaporizers 101: SANS Safety Part 2-103: Particular requirements for drives for gates, doors and windows 103: SANS Safety. Part 2-110: Particular requirements for commercial microwave appliances with insertion or contacting applicators 110: SANS SABS IEC Luminaires Part 2-20: Particular requirements - Lighting chains IEC : SANS Luminaires - Part 2-21: Particular requirements - Rope lights IEC : SANS SABS IEC Switches for household and similar fixed electrical installations Part 2-1: Particular requirements - Electronic switches IEC : B- 7 SABS STANDARDS TECHNICAL PROGRAMME APRIL

8 TECHNICAL PROGRAMME SECTION B: STANDARDS APPROV APPROV INTERNATIONAL RELATNESS SANS Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 22: Particular requirements for connecting boxes and enclosures IEC : SANS SABS IEC Household microwave ovens - Methods for measuring performance IEC 60705: SANS SABS IEC Winding wires - Test methods Part 2: Determination of dimensions IEC : SANS Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval IEC 61215: SANS SABS IEC Lamp controlgear Part 1: General and safety requirements IEC : SANS Enclosed low-voltage switchgear and controlgear assemblies - Guide for testing under conditions of arcing due to internal fault IEC TR 61641: SANS Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval IEC 61646: SANS Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction IEC :2004 +AM 1:2011 +AM 2: SATR Electricity metering-data exchange for meter reading, tariff and load control-part 41: Data exchange using wide area networks: Public switched telephone network (PSTN) with LINK+ protocol IEC/TR : SANS Digital addressable lighting interface - Part 103: General requirements-control devices IEC : SANS Digital addressable lighting interface -- Part 101: General requirements -- System components IEC : SANS Digital addressable lighting interface Part 102: General requirements - Control gear IEC : B- 8 SABS STANDARDS TECHNICAL PROGRAMME APRIL

9 TECHNICAL PROGRAMME SECTION B: STANDARDS APPROV APPROV INTERNATIONAL RELATNESS SANS Safety requirements for secondary batteries and battery installations - Part 1: General safety information IEC : SANS Safety requirements for secondary batteries and battery installations - Part 4: Valve-regulated lead-acid batteries for use in portable appliances IEC : SANS Management of alarm systems for the process industries IEC 62682: SANS Nanotechnologies - Vocabulary - Part 1: Core terms 1:2010 SANS Nanotechnologies - Vocabulary - Part 4 : Nanostructured materials 4:2011 SANS Nanotechnologies - Vocabulary - Part 5: Nano/bio interface 5:2011 SANS Nanotechnologies - Vocabulary - Part 6 : Nanoobject characterization 6:2013 SANS Nanotechnologies - Vocabulary - Part 7 : Diagnostics and therapeutics for healthcare 7:2011 SANS Nanotechnologies - Vocabulary - Part 8 : Nanomanufacturing processes 8:2013 SANS Access network xdsl transmission filters Part 2-2: VDSL splitters for European deployment - Specification of Testing methods for high pass part of VDSL/POTS splitters ETSI TR : SANS spectrum Matters (ERM); Additional ElectroMagnetic Compatibility (EMC) requirements and resistibility requirements for telecommunications equipment for enhanced availability of service in specific applications ETSI ES :2014 B- 9 SABS STANDARDS TECHNICAL PROGRAMME APRIL

10 TECHNICAL PROGRAMME SECTION B: STANDARDS APPROV APPROV INTERNATIONAL RELATNESS SANS SABS ETSI EN spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment 6: SANS spectrum Matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and inear monitoring devices 9:2007 SANS SABS ETSI EN Spectrum Matters (ERM); ElectroMagnetic compatibility (EMC) standard for radio equipment and services Part 12: Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS) 12: SANS SABS ETSI EN spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment Part 17: Specific conditions for Broadband Data Transmission Systems. 17: SANS spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 23: Specific conditions for IMT-2000 CDMA, Direct Spread (UTRA and E-UTRA) Base Station (BS) radio, repeater and ancillary equipment 23: SANS spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA and E-UTRA) for Mobile and portable (UE) radio and ancillary equipment 24: B- 10 SABS STANDARDS TECHNICAL PROGRAMME APRIL