SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Transcription

1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS PRODUCT SERVICE (THAILAND) CO., LTD /2 Soi Soonvijai 4, Rama 9 Rd., Bangkapi, Huaykwang, Bangkok, Thailand Mr. Dirk Fleischer (Quality Manager / Authorized Representative) Phone: fleischer@eurofins.co.th Mr. Detlef Dahms (Deputy Authorized Representative) Phone: detlefdahms@eurofins.co.th ELECTRICAL Valid to: December 31, 2019 Certificate Number: In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory at the location listed above, as well as the satellite location listed below, to perform the following electromagnetic compatibility, energy efficiency, acoustics and product safety tests: Electromagnetic Compatibility Test Technology Test Method(s) 2 Emissions Radiated / Conducted FCC Part 15 B (using ANSI C ); FCC Part 18 (using MP5:1986); IEC CISPR 11; EN 55011; IEC CISPR 13; AS/NZS CISPR 13; EN 55013; J55013 (H22); AS/NZS CISPR 14.1; EN ; IEC CISPR 14-1; J (H20); J (H27); IEC CISPR 15; AS/NZS CISPR 15; EN 55015; TIS ; IEC CISPR 15 (2005+ A1: A2: 2008); TIS ; J55015 (H20); IEC CISPR 22; IEC CISPR 22 (2006); AS/NZS CISPR 22; EN 55022; TIS ; J55022 (H22); J55022 (H20); EN 55032; CISPR 32; EN Current Harmonics IEC ; EN ; TIS ; AS/NZS Voltage Fluctuation / Flicker IEC ; EN ; TIS ; AS/NZS Disturbance Power AS/NZS CISPR 14.1; IEC CISPR 14-1; EN ; J (H20); J (H27); Click Rate AS/NZS CISPR 14.1; IEC CISPR 14-1; EN ; J (H20); J (H27); Insertion Loss AS/NZS CISPR 15; CISPR 15; EN 55015; J55013 (H22) (A2LA Cert. No ) Revised 04/20/2018 Page 1 of 15

2 Test Technology Test Method(s) 2 Immunity Electrostatic Discharge IEC ; EN ; TIS Radiated Immunity IEC ; EN ; TIS ; IEC ; EN Electrical Fast Transients (Burst) IEC ; EN ; TIS Surge Immunity IEC ; EN ; TIS Conducted Immunity IEC ; EN ; TIS Magnetic Field Immunity IEC ; EN ; TIS Voltage Dips Short Interruptions Voltage Variations Harmonics and Interharmonics Including Mains Signaling at A.C. Power Port, Low Frequency IEC ; EN ; TIS IEC ; EN Audio / Video Immunity EN 55020; IEC CISPR 20 Product Family/ Generic Standard International IEC EN IEC EN IEC EN IEC EN Electromagnetic compatibility (EMC) Part 6-1: Generic standards Immunity for residential, commercial and lightindustrial environments Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments Electromagnetic compatibility (EMC) Part 6-3: Generic standards Emission standard for residential, commercial and light-industrial environments Electromagnetic compatibility (EMC) Part 6-4: Generic standards Emission standard for industrial environments EN TIS Cable networks for television signals, sound signals and interactive services Part 2: Electromagnetic compatibility for equipment (A2LA Cert. No ) Revised 04/20/2018 Page 2 of 15

3 EN Alarm systems Part 4: Electromagnetic compatibility Product family standard: Immunity requirements for components of fire, intruder and social alarm systems EN IEC CISPR 14-2 IEC CISPR 20 EN TIS IEC CISPR 24 EN IEC CISPR 24 TIS IEC IEC IEC EN IEC EN IEC EN IEC EN IEC EN Electromagnetic compatibility Requirements for household appliances, electric tools and similar apparatus Part 2: Immunity Product family standard Sound and television broadcast receivers and associated equipment Immunity characteristics Limits and methods of measurement Information technology equipment Immunity characteristics Limits and methods of measurement Medical electrical equipment Part 1-2: General requirements for safety Collateral standard: Electromagnetic compatibility Requirements and tests. Cable networks for television signals, Sound signals and interactive services Part 2: Electromagnetic compatibility for equipment Low-voltage switchgear and control gear Part 1: General rules Low-voltage switchgear and control gear Part 2: Circuitbreakers Electrical equipment for measurement, control and laboratory use EMC requirements Electrical equipment for measurement, control and laboratory use EMC requirements Part 2-2: Particular requirements Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems Equipment for general lighting purposes EMC immunity requirements EN EN Electromagnetic compatibility Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use Part 1: Emission Electromagnetic compatibility Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use Part 2: Immunity (A2LA Cert. No ) Revised 04/20/2018 Page 3 of 15

4 EN CISPR 32 EN IEC EN IEC EN EN Electromagnetic compatibility of multimedia equipment Emission requirements Power line communication apparatus used in low-voltage installations. Radio disturbance characteristics. Limits and methods of measurement apparatus for in-home use Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure Assessment of lighting equipment related to human exposure to electromagnetic fields Household and similar electrical appliances Electromagnetic fields Methods for evaluation and measurement Product Safety International IEC EN IEC EN IEC EN TIS IEC EN TIS Safety of electric toys Degrees of protection provided by enclosures (IP code) Audio, video and similar electronic apparatus Safety requirements Information technology equipment Safety Part I: General Requirements IEC EN IEC EN TIS IEC EN TIS Safety of machinery Electrical equipment of machines Part 1: General requirements Household and similar electrical appliances Safety Part 1: General Requirements Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliance (A2LA Cert. No ) Revised 04/20/2018 Page 4 of 15

5 IEC EN TIS IEC EN TIS IEC EN TIS IEC EN TIS IEC EN TIS IEC EN TIS IEC EN TIS IEC EN TIS IEC EN TIS IEC EN TIS IEC EN TIS IEC EN TIS IEC EN Part 2-3: Particular requirements for electric irons Part 2-4: Particular requirements for spin extractors Part 2-5: Particular requirements for dishwashers Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances Part 2-7: Particular requirements for washing machines Part 2-8: Particular requirements for shavers, hair clippers and similar appliances Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances Part 2-11: Particular requirements for tumble dryers Part 2-12: Particular requirements for warming plates and similar appliances Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances Part 2-14: Particular requirements for kitchen machines Part 2-15: Particular requirements for appliances for heating liquids Part 2-21: Particular requirements for storage water heaters (A2LA Cert. No ) Revised 04/20/2018 Page 5 of 15

6 IEC EN TIS IEC EN TIS IEC EN TIS IEC EN IEC EN TIS IEC EN TIS IEC EN IEC EN TIS IEC EN TIS IEC EN IEC EN TIS IEC EN TIS IEC EN TIS Part 2-23: Particular requirements for appliances for skin or hair care Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens Part 2-26: Particular requirements for clocks Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation Part 2-29: Particular requirements for battery chargers Part 2-30: Particular requirements for room heaters Part 2-31: Particular requirements for range hoods Part 2-32: Particular requirements for massage appliances Part 2-34: Particular requirements for motor-compressors Part 2-35: Particular requirements for instantaneous water heaters Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers Part 2-41: Particular requirements for pumps (A2LA Cert. No ) Revised 04/20/2018 Page 6 of 15

7 IEC EN TIS IEC EN IEC EN TIS IEC EN TIS IEC EN IEC EN IEC EN IEC EN TIS IEC EN TIS IEC EN TIS IEC EN IEC EN IEC EN TIS IEC EN Part 2-44: Particular requirements for ironers Part 2-45: Particular requirements for portable heating tools and similar appliances Part 2-52: Particular requirements for oral hygiene appliances Part 2-53: Particular requirements for sauna heating appliances Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds Part 2-56: Particular requirements for projectors and similar appliances Part 2-59: Particular requirements for insect killers Part 2-65: Particular requirements for air-cleaning appliances Part 2-74: Particular requirements for portable immersion heaters Part 2-75: Particular requirements for commercial dispensing appliances and vending machines Part 2-78: Particular requirements for outdoor barbecues Part 2-80: Particular requirements for fans Part 2-81: Particular requirements for foot warmers and heating mats (A2LA Cert. No ) Revised 04/20/2018 Page 7 of 15

8 IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN TIS IEC EN TIS IEC EN TIS IEC EN TIS IEC EN TIS IEC EN IEC EN IEC EN TIS IEC EN Part 2-84: Particular requirements for toilets Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor Part 2-98: Particular requirements for humidifiers Luminaries Part 1: General requirements and tests Part 2-1: Particular requirements Fixed general purpose luminaries Part 2-2: Particular requirements Recessed luminaires Part 2-3: Particular requirements Luminaires for road and street lighting Part 2-4: Particular requirements Portable general purpose luminaries Part 2-5: Particular requirements Floodlights Part 2-6: Particular requirements Luminaries with built-in transformers or converters for filament lamps Part 2-7: Particular requirements Portable luminaries for garden use Part 2-8: Particular requirements Hand lamps Part 2-9: Particular requirements Photo and film luminaries (non-professional) (A2LA Cert. No ) Revised 04/20/2018 Page 8 of 15

9 IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN TIS IEC EN IEC EN IEC EN TIS IEC EN IEC EN IEC EN IEC EN Part 2- l0: Particular requirements Portable luminaries for children Part 2-17: Particular requirements Luminaries for stage lighting, television film and photographic studios (outdoor and indoor) Part 2-20: Particular requirements Lighting chains Part 2-22: Particular requirements Luminaries for emergency lighting Part 2-23: Particular requirements Extra low-voltage lighting systems for filament lamps Part 2-24: Particular requirements Luminaries with limited surface temperatures Automatic electrical controls for household and similar use Part 1: General requirements Safety requirements for electrical equipment for measurement, control and laboratory use. General requirements Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement Single-capped fluorescent lamps Safety specifications Lamp Control gear- Part 1: General and safety requirements Part 2-1: Particular requirements for starting devices (other than glow starters) Part 2-3: Particiular requirements for AC and/or DC supplied electronic control gear for fluorescent lamps Part 2-4: Particular requirements for DC supplied electronic ballasts for general lighting (A2LA Cert. No ) Revised 04/20/2018 Page 9 of 15

10 IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN Part 2-13: Particular requirements for DC or AC supplied electronic control gear for LED modules Safety of power transformers, power supply units and similar Part 1: General requirements and tests Part 2-1: Particular requirements for separating transformers for general use Part 2-2: Particular requirements for control transformers Part 2-4: Particular requirements for isolating transformers for general use Part 2-6: Particular requirements for safety isolating transformers for general use Part 2-7: Particular requirements for transformers for toys Part 2-8: Particular requirements for bell and chime transformers Part 2-9: Particular requirements for transformers for class III hand lamps for tungsten filament lamps Part 2-12: Particular requirements for constant voltage transformers Part 2-13: Particular requirements for auto-transformers for general use Part 2-16: Particular requirements for transformers for switch mode power supplies. Incandescent lamps Safety specifications Part 1: Tungsten filament lamps for domestic and similar general lighting purposes Incandescent lamps Safety specifications Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes Incandescent lamps Safety specifications Part 3: Tungsten-halogen lamps (non-vehicle) Low-voltage switchgear and control gear Part 1: General rules (A2LA Cert. No ) Revised 04/20/2018 Page 10 of 15

11 IEC EN Adjustable speed electrical power drive systems Part 5-1: Safety requirements Electrical, thermal and energy Energy Efficiency International ISO IEC EN UAE.S IEC JIS C 9801 JS 1749 IS SANS SANS 1691 TIS IEC EN GSO IEC IEC EN GSO IEC IEC EN GSO IEC EN 153 ES 3794 Household refrigerating appliances Characteristics and test methods Household refrigerating appliances Charateristics and test methods Part 1: General requirements Household refrigerating appliances Charateristics and test methods Part 2: Performance requirements Household refrigerating appliances Charateristics and test methods Part 3: Energy consumption and volume Methods of measuring the energy consumption of electric mains operated household refrigerators, frozen food storage cabinets, food freezers, and their combinations, together with associated characteristics Energy efficiency of Household and similar Electrical Appliances Measurement and Calculation Methods for Energy Consumption of Refrigerators, Refrigerator- Freezers and Freezers UNIT 1138 EN IEC EN Energy efficiency Electrical refrigerating equipment household specifications and labeling Methods of measurement for the power consumption of audio, video and related equipment Household electrical appliances Measurement of Standby power (A2LA Cert. No ) Revised 04/20/2018 Page 11 of 15

12 EN Electrical and electronic household and office equipment Measurement of low power consumption IEC EN IEC EN UAE.S IEC SASO 2683/2007 JIS C 9811 IS TIS SASO 2664/2007 SASO 2664/2013 SASO 2892/2018 SASO 2692/2007 SASO 2692/2013 Methods of measurement on receivers for television broadcast transmission General considerations Measurements on displays at radio and video frequencies Clothes washing machines for household use Methods for measuring the performance Energy Performance and Capacity of Household refrigerators, refrigerator-freezers, and freezers Refrigerators, Refrigerator Freezers and Freezers Energy performance, testing and labeling requirements Energy labelling requirements of household electrical clothes washing machines SASO 2693/2007 Clothes washing machines for household use Performance requirements SAO 2885/2018 SASO 2883/2017 SASO 2772/2009 SASO 2772/2016 Electrical Clothes Washing Machines Energy and Water performance requriements and labelling Electrical Clothes Dryers Energy Performance Requirements and Labelling Water consumption efficiency requirements for clothes washing machines Rating and labeling AS/NZS Performance of household electrical appliances Refrigerating appliances Energy consumption and performance AS/NZS Performance of household electrical appliances Refrigerating appliances Energy labelling and minimum energy performance standard requirements AS/NZS Performance of household electrical appliances Clothes washing machines Methods for measuring performance, energy and water consumption (A2LA Cert. No ) Revised 04/20/2018 Page 12 of 15

13 AS/NZS Performance of household electrical appliances Clothes washing machines Energy efficiency labelling requirements UAE.S Energy efficiency label for electrical appliances Part 2: Washing machines and dryers UAE.S Energy efficiency label for electrical appliances Part 3: Household refrigerating appliances JS 1717 (2006) JS 1888 (2012) JS 2102 JS 2101 IEC UAE.S IEC IEC EN UAE.S IEC JIS C 9606 JIS C 9607 Clothes washing machines for household use Methods for measuring the performance Technical regulation on eco-design requirements for household refrigerating appliances Energy labelling for household refrigerating appliances Electric clothes washer/dryers for household use Methods for measuring the performance Tumble dryers for house hold use Methods for measuring the performance Electric washing machines Household electric refrigerators, refrigerator-freezer and freezers Acoustics International IEC EN IEC EN IEC EN IEC EN Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 1: General requirements Part 2-1: Particular requirements for vacuum cleaners Part 2-2: Particular requirements for fan heaters Part 2-3: Particular requirements for dishwashers (A2LA Cert. No ) Revised 04/20/2018 Page 13 of 15

14 IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN IEC EN ISO 3744 ISO 3745 ISO 7779 ISO 9295 Part 2-4: Particular requirements for washing machines and spin extractors Part 2-5: Particular requirements for electric thermal storage room heaters Part 2-6: Particular requirements for tumble dryers Part 2-7: Particular requirements for fans Part 2-8: Particular requirements for electric shavers Part 2-9: Particular requirements for electric hair care appliances Part 2-10: Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these Part 2-11: Particular requirements for electrically-operated food preparation Part 2-13: Particular requirements for range hoods Part 2-14: Particular requirements for refrigerators, frozenfood storage cabinets and food freezers Part 3: Procedure for determining and verifying declared noise emission values Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane Acoustics Determination of sound power levels of noise sources using sound pressure Precision methods for anechoic and hemi-anechoic rooms Acoustics Measurement of airborne noise emitted by information technology and telecommunications equipment Acoustics Measurement of high-frequency noise emitted by computer and business equipment (A2LA Cert. No ) Revised 04/20/2018 Page 14 of 15

15 ISO 9296 Acoustics Declared noise emission values of computer and business equipment 1 Accreditation is granted to this laboratory at the location listed above as well as the satellite laboratory location listed below. 98/2 Moo 19, Tumbol Takhi Takhi District, Nakhon Sawan 60140, Thailand Test Technology Test Method(s) 2 Emissions Radiated FCC Part 15 B (using ANSI C ); FCC Part 18 (using MP5:1986); IEC CISPR 11; EN 55011; IEC CISPR 13; AS/NZS CISPR 13; EN 55013; J55013 (H22); IEC CISPR 22; IEC CISPR 22 (2006); AS/NZS CISPR 22; EN 55022; TIS ; J55022 (H22); J55022 (H20); EN 55032; CISPR 32; EN When the date, revision or edition of a test method standard is not identified on the scope of accreditation, the laboratory is expected to be using the current version within one year of the date of publication, per part C., Section 1 of A2LA R101 - General Requirements- Accreditation of ISO-IEC Laboratories. On the following products or types of products: Adjustable speed electrical power drive systems, alarm systems, Audio, video, audio-visual and entertainment lighting control apparatus for professional use, Cable networks for television signals, sound signals and interactive services, Electric toys, Electrical equipment for measurement, control and laboratory use, Electrical equipment of machines, Equipment for general lighting purposes, Household appliances, electric tools and similar apparatus, Incandescent lamps, Industrial, scientific and medical electrical equipment, Information technology equipment, Lamp Control gear, Low-voltage switchgear and control gear, Luminaries, Medical electrical equipment (non-life supporting), Multimedia equipment, Power line communication apparatus used in low-voltage installations, Power transformers, power supply units and similar, Single-capped fluorescent lamps, Sound and television broadcast receivers (A2LA Cert. No ) Revised 04/20/2018 Page 15 of 15

16 Accredited Laboratory A2LA has accredited EUROFINS PRODUCT SERVICE (THAILAND) CO., LTD. Bangkok, Thailand for technical competence in the field of Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 4 th day of December President and CEO For the Accreditation Council Certificate Number Valid to December 31, 2019 For the tests to which this accreditation applies, please refer to the laboratory s Electrical Scope of Accreditation.