CORDLESS HYDRAULIC TOOLS

CORDLESS HYDRAULIC TOOLS

18.0 V - 4.0 Ah CORDLESS TOOL FEATURES Head rotates through 180. Switch protected against accidental operation. Pressure release button. Slot-in battery with release button. LED lighting of the working area. Motor ventilation. Bi-component body for increased impact resistance. Multifunction OLED display with touch button. Improved balance for better handling. Anatomically shaped grip for greater comfort. 18.0 V - 4.0 Ah high power batteries. SMARTOOL technology for viewing and downloading operational data. SUPPLIED WITH CB 1840L, 18.0 V - 4.0 Ah high power battery (2 pcs.) ASC 30-36 UK 27045000 charger. (INPUT 220-240 V / 50-60 Hz; OUTPUT 12-42 V DC / 3.0 A max.) USB cable. Shoulder strap. Plastic or Metal carrying case. Multifunction OLED display: General operating information Tool service required to maintain optimum condition power availability Pressure level check check 150

18.0 V - 2.0 Ah CORDLESS TOOL FEATURES Head rotates for ease of operation in confined spaces Switch protected against accidental operation Pressure release button Slot-in battery with release button condition displayed to show the residual battery power Motor ventilation. The tools are fitted with a maximum pressure valve to indicate a correct crimping operation or the full extent of the ram travel. Can be operated with one hand Durable moulded body offering high resistance to wear and damage in all operating conditions. Extremely quiet in operation with very little vibration. Improved balance for better handling. Anatomically shaped grip for greater comfort. 18.0 V - 2.0 Ah high power batteries. es. SUPPLIED WITH CB 1820L, 18.0 V - 2.0 Ah high power battery (2 pcs.) ASC 30-36 UK 27045000 charger. (INPUT 220-240 V / 50-60 Hz; OUTPUT 12-42 V DC / 3.0 A max.) Plastic carrying case or vinyl bag. 151

B 15MDE 15 337 133 81 18.0 V 2.0 Ah 1,74 Copper lugs End sleeves 0,25-16 0,25-16 0,3-35 VAL P22 465x315xh116 1,5 and wrist strap storing the tool and accessories Can be operated with one hand. Balanced for greater control. Head rotates by 340 for ease of operation in confined spaces. The tool is fitted with a maximum pressure valve. Extremely quiet, minimal vibration. Durable moulded body offering high resistance to wear and damage in all operating conditions. 18.0V 2.0Ah High er Pow- battery. Many different interchangeable crimping dies available CRIMPING DIES AVAILABLE Conductor size mm 2 (AWG) Connector type DIE SET 0,25 16 22 6 A... ; L...-M ; L...-P ; S... ; RN... ; BN... ; GN... MA03/3-15 1,5 10 16 8 A... ; L...-M ; L...-P ME03/2-15 10 16 8 6 A...; 2A... ; L...-M ; L...-P ME2/3-15 4 10 12 8 T... (NF C 20130 style) ; L...-T MS4/10-15 10 16 8 6 T... (NF C 20130 style) ; L...-T MS10/16-15 10 16 8 6 HR... ; HSV... MH10/16-15 6 16 10 6 DR... (DIN 46235 style) ; DSV... (DIN 46267 T1 style) MK5/8-15 10 16 8 6 ANE... ; AN... ; IN... ; EN... NN4-15 0,25 6 22 10 R... ; B... ; G... (not suffix P); PL... ; NL... RBG-15 0,25 6 22 10 R... ; B... ; G... (not suffix P, RF/BF-BF) RBY-15 with positioner 0,3 4 22 12 PKE ; PKC ; PKD ; PKT ; KE KE4-15 4 16 12 6 PKE ; PKC ; PKD ; PKT ; KE KE16-15 16 35 6 2 PKE ; PKC ; PKD ; PKT ; KE KE35-15 2,5-4 - 6 14-12 -10 CS4 (per impianti fotovoltaici) MCS4-15 The battery is equipped with LED indicators to show the remaining battery life at any time by pressing the adjacent button. in a robust plastic case to accommodate the tool and all the accessories. Two batteries and charger included. Many different interchangeable crimping dies available. condition display Interchangeable die sets Ergonomically designed operating switch Automatic slot-in battery 152

B 35-45MDE 35 354 133 81 18.0 V 2.0 Ah 2,19 H.V. lugs 150 35 70 and wrist strap VAL P22 465x315xh116 1,5 storing the tool and accessories Can be operated with one hand. Balanced for greater control. Head rotates 180 for ease of operation in confined spaces. Fitted with a maximum pressure valve. Extremely quiet, minimal vibration. Durable moulded body offering high resistance to wear and damage in all operating conditions. Wide-opening head, ideal for derivations from running ductors con- 18.0V 2.0Ah High er battery. Powed with LED The battery is equipped indicators to show the remaining battery life at any time by pressing the adjacent button. in a robust plastic case to accommodate the tool and all the accessories. Two batteries and charger included. B35-45MDE accepts many of the dies common to 45 Cembre crimping tools. B35-45MDE specific dies avaiable for crimping 120 mm 2 and 150 mm 2. Application field as shown in the table above. For further details please refer to tables of page 178-190. Motor ventilation Head rotates 180 for ease of Pressure release button Sculptured body for optimum operation comfort 153

B 35-50MDE D i m e n s i o n s length height width 35 387 133 81 18.0 V 2.0 Ah 2,6 End sleeves 150 50 95 35 VAL P22 465x315xh116 1,5 and wrist strap storing the tool and accessoriess Can be operated with one hand. Balanced for greater control. Head rotates 180 for ease of operation in confined spaces. Fitted with a maximum pressure valve. Extremely quiet, minimal vibration. Durable moulded body offering high resistance to wear and damage in all operating conditions. 18.0V 2.0Ah High Power battery. The battery is equipped with LED indicators to show the remaining battery life at any time by pressing the adjacent button. in a robust plastic case to accommodate the tool and all the accessories. Two batteries and charger included. B35-50MDE accepts many of the dies common to 50 Cembre crimping tools. B35-50MDE specific dies avaiable for crimping 120 mm 2 and 150 mm 2. Application field as shown in the table above. For further details please refer to tables of page 178-190. -15 à +50 C Wide-opening head, ideal for derivations from running conductors condition display Pressure release button Switch ergonomically designed Automatic slot-in battery 154

B 54MD-D6E 54 458 133 81 18.0 V 2.0 Ah 2,95 Copper lugs MAIN APPLICATIONS - max section AWG Aluminum lugs Aluminum H taps 300 MCM 4/0 4/0-4/0 and wrist strap Plastic carrying case suitable for storing the tool and accessories VAL P45 497x370x137 2,3 VAL MAT-W 175x96x45 0,93 VAL MAT-W Available as optional accessories: VAL MAT-W metal case for storing 12 Index die sets, fits into VAL-P45. The professional tool ideal for OH lines and residential service applications. Stick tool shape for better handling. Can be operated with one hand. Balanced for greater control. Jaws rotate by 180 for ease of eration in confined spaces. op- The tool is fitted with a maximum pressure valve. Extremely quiet, minimal vibration. Durable moulded body offering high resistance to wear and damage in all operating conditions. 18V 2Ah High Power battery. The battery is equipped with LED indicators to show the remaining battery life at any time by pressing the adjacent button. in a robust plastic case for storing the tool ol and all accessories. Two batteries and charger included. Standard interchangeable ing jaw: CDD6 with D3 groove crimpto accept all W style crimping dies + BG fixed groove. ing temperature: -15 à +50 Operat- C CDD6 jaws With D3 groove to accept all W style crimping dies + BG fixed groove. CDD6-8 jaws With D3 groove to accept all W style crimping dies + O fixed groove. CMB1 jaws Cutting jaws for: one-time disposable lock hasps, 4AWG Alumoweld; ACSR 4/0 INTERCHANGEABLE CRIMPING JAWS CAT. No GROOVES CRIMPING DIE COMPATIBILITY CDD6 CDD6-8 CMB1 CMB2 CMB3 D3 TO ACCEPT ALL W FCI Burndy W, X Series STYLE CRIMPING DIES + Green lee KD6 Series BG FIXED GROOVE Ilsco ND Series D3 TO ACCEPT ALL W Huskie HT-58 Series STYLE CRIMPING DIES + O FIXED GROOVE Panduit CD-2001 series Cutting jaws for: one-time disposable lock hasps; 4AWG Alumoweld; ACSR 4/0 Cutting jaws for: # 8 Copperweld; 4/0 Cu.; 336 MCM Aluminium; 477 MCM ACSR (Str. 26/7) Cutting jaws for: 1/4" Guy Wire ; 5/16" Guy Wire Canvas Bag 013 Sturdy canvas bag, suitable for storing the cutting jaws CMB2 jaws Cutting jaws for: - # 8 Copperweld - 4/0 Cu. - 336 MCM Aluminium - 477 MCM ACSR (Str. 26/7) Cutting jaws for: - 1/4" Guy Wire - 5/16" Guy Wire CMB3 jaws Jaws rotate 180 Detail of the quick jaw change device. 155

B 500E Nominal Compression Force 63 300 343 83 18.0 V 4.0 Ah 4,2 End sleeves 300 120 120 70 VALP38 520x432x126 2,6 and shoulder strap Plastic carrying case suitable for storing the tool and 14 die sets The next generation of Cembre cordless hydraulic tools represents a significantly advantageous evolution from current models. Born of the renowned B51 type crimping tool, the 63 B500E is suitable for a wide range of connectors up to 240 sqmm using die sets common to the Cembre 50 tooling range. 18 V 4 Ah batteries offer a higher capacity than 14.4 V 3 Ah, while greater crimping speed and crimping result from a revitalised hydraulic system with double speed action: a rapid approach of the dies to the connector then a slower, more powerful speed for crimping. A maximum pressure sensor and pressure relief valve assure greater precision and repeatability of the pressure cycle and double the provision for operator safety. The OLED display provides essential real time tool operating information data including: - pressure and being generated, for confirmation of adherence to norms and best practice - power availability - Tool identification, LED work light state, reset, no. of operational and service crimping cycles - Tool service required to maintain optimum condition. Designed with improved balance, B500E is easily manageable during the crimping process and, by the use of bi-component plastics, has a shell with high resistance to wear and damage. Rubber grip inserts, low noise and minimal vibration aid operator comfort while additional convenience and safety are provided by LED lighting of the working area. cycle data (up to 200,000 events) is automatically stored on a memory card for transfer to PC by USB interface. B 500E-KV version also available for Power Supply Companies LED lighting of the working area Anatomically shaped grip for improved comfort Multifunction OLED display with touch button Slot-in battery with release button 156

57.7 358 358 83 18.0 V 4.0 Ah 5,3 B 550E Copper lugs End sleeves 240 120 120 70, wrist strap and shoulder strap Plastic carrying case suitable for storing the tool and accessories With adapter AU55-50 for accepting Cembre dies. Cembre die AU55-50 adapter VALP40 520x432x126 2,6 With adapter AU55-W for accepting W dies. AU55-W adapter The next generation of Cembre cordless s hydraulic tools represents a significantly icantly advantageous tion from current models. evolu- The B 550E, with adapter AU55-50, will l accept all Cembre 50 dies; with adapter AU55-W it will accept cept "W" dies. 18 V 4 Ah ies offer a higher capacity than batter- 14.4 V 3 Ah, while greater crimping speed and crimping result from a revitalised draulic system with double speed hy- action: a rapid approach of the dies to the connector then a slower, more powerful speed for crimping. A maximum pressure sensor and pressure relief valve assure greater precision and repeatability of the pressure cycle and double the provision for operator safety. The OLED display provides essential real time tool operating information data including: - pressure and being generated, for confirmation of adherence to norms and best practice - power availability - Tool identification, LED work light state, reset, no. of operational and service crimping cycles - Tool service required to maintain optimum condition. Designed with improved balance, B550E is easily manageable during the crimping process and, by the use of bi-component plastics, has a shell with high resistance to wear and damage. Rubber grip inserts, low noise and minimal vibration aid operator comfort while additional convenience and safety are provided by LED lighting of the working area. cycle data (up to 200,000 events) is automatically stored on a memory card for transfer to PC by USB interface. W die Suitable for installing the same range of connectors of B 550E, B 550E-KV tool is provided with additional coatings to protect the operator and tool against accidental brush contact t with energised conductors. Particularly suitable for Power Supply Companies. B 550E-KV 157

B 1350-CE Nominal Compression Force Jaw Opening mm 132 338 344 83 25 18.0 V 4.0 Ah 6,4 H.V. lugs H.V. Splices 400 240 185 400 400* *limited to the cable insulation diameter The next eration of Cem- genbre cordless hydraulic tools represents a significantly advantageous ageous evolution from rent models. Born of the renowned B135-C type cur- crimping tool, B1350-CE is suitable for a wide range of connectors up to 400 sqmm using die sets common to the bre 130 tooling range. Cem- 18 V 4 Ah teries offer a higher ca- batpacitthan 14.4 V 3 Ah, while greater crimping speed and crimping result from a vitalised hydraulic system with dou- reble speed action: a rapid approach of the dies to the connector then a slower, more powerful speed for crimping. A maximum pressure sensor and pressure relief valve assure greater precision and repeatability of the pressure cycle and double the provision for operator safety. B 1350L-CE The OLED display provides essential real time tool operating information data including: - pressure and be- ing generated, for confirmation of adherence to norms and best practice - power availability - Tool identification, LED work light state, reset, no. of operational and service crimping cycles - Tool service required to maintain optimum condition. length height width VALP39 520x432x126 2,6 The tool is supplied as: and shoulder strap storing the tool and 8 die sets Designed with improved balance, B1350-CE is easily manageable ing the crimping process and, by the dur- use of bi-component plastics, has a shell with high resistance to wear and damage. Rubber grip inserts, low noise and minimal vibration aid operator comfort while additional convenience and safety are provided by LED lighting of the working area. cycle data (up to 200,000 events) is automatically stored on a memory card for transfer to PC by USB interface. Jaw Opening mm 132 395 372 83 42 18.0 V 4.0 Ah 8,2 B 1350-CE-KV version also available for Power Supply Companies H.V. lugs 400 240 185 400 B1350L-CE version, featuring a large 42 mm jaw opening, for an easier introduction/removal of large size compression terminations and joints. ter and shoulder strap Plastic carrying case su- itable for storing the tool and 8 die sets VALP39 520x432x126 2,6 B 1350L-CE-KV version also available for Power Supply Companies 158

132 351 369 83 18.0 V 4.0 Ah 5,9 B 1350-UCE H.V. lugs Alu lugs 400 240 185 400 300 and shoulder strap storing the tool and 8 die setss VALP39 520x432x126 2,6 VAL 130* 360x280xh48 3,0 *Suitable for the storage of accessories for crimping Aluminium connectors The next generation of Cembre cordless hydraulic tools repre-esents a significantly advantageous evolution from current models. Born of the renowned B135-UC type crimping tool, B1350-UCE will accept the accessories for performing the Deep Stepped Indent system of crimping on Aluminium cables. The B1350-UCE will accept all semi-circular slotted dies, common to most 12 tons tools (U dies). 18 V 4 Ah batteries offer a higher capacity than 14.4 V 3 Ah, while greater crimping speed and crimping result from a revitalised hydraulic system with double speed action: a rapid approach of the dies to the connector then a slower, more powerful speed for crimping. A maximum pressure sensor and pressure relief valve assure greater precision and repeatability of the pressure cycle and double the provision for operator safety. The OLED display provides essential real time tool operating information VAL P39 VAL 130 data including: - pressure and ing generated, for confirmation beof adherence to norms and best practice - power availability - Tool identification, LED work light state, reset, no. of operational and service crimping cycles - Tool service required to maintain optimum condition. Designed with improved balance, B1350-UCE is easily manageable Multifunction OLED display with touch button during the crimping process and, by the use of bi-component plastics, has a shell with high resistance to wear and damage. Rubber grip inserts, low noise and minimal vibration aid operator comfort while additional convenience and safety are provided by LED lighting of the working area. cycle data (up to 200,000 events) is automatically stored on a memory card for transfer to PC by USB interface. LED lighting of the working area Anatomically shaped grip for improved comfort Slot-in battery with release button 159

B 1300-CE length height width Jaw Opening mm 132 406 239 102,5 25 18.0 V - 4.0 Ah 6,5 VAL P44 680x473x151 3,7 and shoulder strap storing the tool and 12 die sets H.V. lugs H.V. Splices 400 240 185 400 400* *limited to the cable insulation diameter The next generation of Cembre cordless hydraulic tools represents a significantly advantageous evolution from current models. Born of the renowned B131-C type crimping tool, B1300-CE is suitable for a wide range of connectors up to 400 sqmm using die sets common to the Cembre 130 tooling range. 18 V 4 Ah batteries offer a higher capacity than 14.4 V 3 Ah, while greater crimping speed and crimping result from a revitalised hydraulic system with double speed action: a rapid approach of the dies to the connector then a slower, more powerful speed for crimping. A maximum pressure sensor and pressure relief valve assure greater precision and repeatability of the pressure cycle and double the provision for operator safety. The OLED display provides essential real time tool operating information data including: - pressure and being generated, for confirmation of adherence to norms and best practice - power availability - Tool identification, LED work light state, reset, no. of operational and service crimping cycles - Tool service required to maintain optimum condition. Designed with improved balance, B1300-CE is easily manageable able during the crimping process and, by the use of bi-component plastics, has a shell with high resistance e to wear and damage. Rubber grip inserts, low noise and minimal vibration aid operator comfort while additional convenience and safety are provided by LED ing of the working area. light- cycle data (up to 200,000 events) is automatically ally stored on a memory card for transfer to PC by USB interface. Anataomically shaped grip for improved comfort B 1300-CE-KV version also available for Power Supply Companies LED lighting of the working area B 1300L-CE-KV version also available for Power Supply Companies Slot-in battery with release button Multifunction OLED display with touch button 160

Jaw Opening mm 132 471 239 102,5 42 18.0 V - 4.0 Ah 8,0 B 1300L-CE H.V. lugs 400 240 185 400 VAL P44 680x473x151 3,7 and shoulder strap storing the tool and 12 die sets Also available in the B1300L-CE version, featuring a large 42 mm jaw opening, for an easier introduction/ removal of large size compression terminations and joints. 132 423 239 102,5 18.0 V - 4.0 Ah 6,5 B 1300-UCE H.V. lugs Alu lugs 400 240 185 400 300 VAL P44 680x473x151 3,7 VAL 130* 360x280xh48 3,0 *Suitable for the storage of accessories for crimping Aluminium connectors and shoulder strap storing the tool and 12 die setss VAL P44 VAL 130 The next generation of Cembre e cordless hydraulic tools represents a significantly advantageous evolution from current models. Born of the renowned B131-UC type crimping tool, B1300-UCE will accept the accessories for performing the Deep Stepped Indent system of crimping on Aluminium cables. The B1300-UCE will accept all semi-circular slotted dies, common to most 12 tons tools (U dies). 18 V 4 Ah batteries offer a higher capacity than 14.4 V 3 Ah, while greater crimping speed and crimping result from a revitalised hydraulic system with double speed action: a rapid approach of the dies to the connector then a slower, more powerful speed for crimping. A maximum pressure sensor and pressure relief valve assure greater precision and repeatability of the pressure cycle and double the provision for operator safety. The OLED display provides essential real time tool operating information data including: - pressure and being generated, for confirmation of adherence to norms and best practice - power availability - Tool identification, LED work light state, reset, no. of operational and service crimping cycles - Tool service required to maintain optimum condition. Designed with improved balance, B1300-UCE is easily manageable during the crimping process and, by the use of bi-component plastics, has a shell with high resistance to wear and damage. Rubber grip inserts, low noise and minimal vibration aid operator comfort while additional convenience and safety are provided by LED lighting of the working area. cycle data (up to 200,000 events) is automatically stored on a memory card for transfer to PC by USB interface. 161