1-1 3 1 5 1 kg/cm 11 1 1 1 1 1 1-1 3 1 5 1 1-1 3 1 5 1 1-1 3 5 1 COMPLETE WATE TEMPEATUE CONTOL STATION ECO-MIX Valve is ASSE 117 Certified Submittal S-11-1-LF August, 1 MEGATON LEAD FEE MODEL XLLF 1 HOT & COLD INLETS 1 ¼ MIXED OUTLET ¾ ETUN PIPING 1to1GPM(3.to31l/min) 1 Valve assembly is certified to meet Low-Lead requirements of wetted surface area containing less than.5% lead by weight. All other fittings and components, the sum total of which comprise the wetted surface of this product contains less than one quarter of one percent of lead by weight. See page for Specification detail 1 1 1 See page 3 for Drawing detail 1 See page for Flow capacity chart See page 5 for Options Engineer's Approval Job #! WANING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.p5warnings.ca.gov 1 Leonard Valve Company Printed in USA Arch/Eng. Contractor Note: The models shown represent Leonard Products which are believed to be equivalent in type and function to items specified. Leonard Valve Company is not responsible for errors or omissions due to differences in interpretations of information provided. Product is non-cancellable and non-returnable from date from order with factory. Signed submittal required with purchase order. 13 Elmwood Avenue, Cranston, I 91 USA Phone: 1.1.1 Fax: 1.91.531 Email: info@leonardvalve.com Web Site: http://www.leonardvalve.com
EQUIED INFOMATION WHEN ODEING Circulator requirements must be specified by the Engineer, lines 1 and are EQUIED, line 3 is optional 1. Circulated flow required, (not mixing valve flow) SEE NOTE *. Head required without Megatron Assembly 3. Standard pump is TACO 13, if another manufacturer is preferred please specify, but note that ANY change from standard pump will result in a PICE INCEASE * NOTE: If circulated flow rate is greater than 1 GPM please select appropriate eturn Line Size from page 5 Piping Options, piping changes will also result in a price increase. MEGATON MODEL XL--LF * Lead Free construction, to comply with LEAD FEE requirements * Wetted surface area of this product contains less than one quarter of one percent (.5%) of lead by weight MEGATON MODEL XL--LF Complete Water Temperature Control Station (1-1 GPM, 3. to 31 l/min) to include: 1 bottom inlet connections (copper tube) 1 ¼ top outlet connection (copper tube) ¾ return line size with piping method #W Copper encapsulated thermostatic assembly with Teflon coated shuttle Locking temperature regulating handle set for 1 o F(9 o C) Temperature adjustment range, 9-1ºF (3-ºC) ** Full port ball valve, pressure gauge on mixed water outlet piping of mixing valve. Dial thermometer (range: to 1 F,-1to C) and pressure gauge on mixed water outlet of the system. Outlet Test Connection with ball valve and ¾ hose connection with cap Full port ball valve mounted downstream of test connection on mixed water outlet of the system Inlet piping manifold with full port ball valves and dial thermometers ( to F, -7 to 11 C on hot supply, to 1 F,-1to C on cold supply) on hot and cold supply inlets eturn piping, ¾, with aquastat, circulator, dial thermometer ( to 1 F,-1to C), balancing valve (with positive shutoff) to balance system, and check valve Aquastat with temperature differential of 5 to 3 F(3to17 C) GFCI* switch. The GFCI switch will be used to turn the circulator on or off for setup. *Ground Fault Interrupter Bypass piping, ¾, with check valve and isolation ball valve to cold inlet of mixing valve Maximum operating pressure: 15 PSIG (KPA) System mounted on strut, galvanized. Strut shall be assembled with three hole flat angle plate on corners, four hole tee plates or two hole flat plate connectors on all other support pieces using 3/ grip lock nuts and 3/ x 1 hex head cap screws, washers and lock washers. Factory pre-assembled and tested as a complete system All electrical connections to be completed by Electrical Contractor **NOTE: For temperatures outside of this valve s stated range, please see our line of bi-metal valves.
1-1 3 1 kg/cm 11 5 1 1 1 1 1 1 1 1-1 3 5 1 1 1 1-1 3 5 1 1 1 1-1 3 5 1 1 1 MEGATON MODEL XL--LF 3 " MIXED OUTLET 1 9 7 1 3/" ETUN FOM BUILDING 1 " 13 3 11 1 5 11 1 3/" ETUN TO HOT WATE SOUCE 3/" HOT SUPPLY 1" 3/" COLD SUPPLY 35" 1 Dimensions may vary with the addition of options see page #5 LEGEND 1. Full port ball valve. Mixing valve 3. Tee Drain. Test connection 5. Balancing Valve. Dial thermometer 7. Pressure gauge. Circulator-As specified by Engineer 9. Aquastat 1. Circulator power switch 11. Flapper check 1. Galvanized Strut 13. Tee bracket 1. Corner Bracket 3
MEGATON MODEL XL--LF (1 TO 1 GPM) Flow Capacity PESSUE DOP 5 1 15 5 3 35 5 5 PSI.3.7 1 1. 1.7.1.. 3.1 3. BA 1 19 3 39 3 51 55 5 1 GPM 3. 7 1 19 1 13 1 193 19 31 l/min MIN + FLOW NOTE: Flowrates will vary depending on existing field conditions. Leonard Valve Company always recommends using CASPAK sizing software for proper valve sizing and model number applications. Note: The XL--LF model must be selected based upon the following: Maximum system demand for mixed water System pressure drop* Designer s estimated minimum mixed water flow requirement *System pressure drop= the pressure available at the inlet of the mixing valve unit minus the pressure required to operate the farthest fixture, i, e,. Shower valves, in the building. EXTENDED THEMOSTAT WAANTY Call the factory at 1---1 for details on Leonard's exclusive Extended Limited Warranty for High Low System Thermostats. Note! Specifications are subject to change without notice.!!!!
1-1 3 1 5 1 1 1 kg/ cm 11 1 1 1 1 3 1-1 5 1 1 1 1-1 3 5 1 1 1 1-1 3 5 1 1 1 1 kg/cm 11 1 1 1 1 LEON AD 1 kg/cm 11 1 1 1 1 1 kg/cm 11 1 1 1 1 1 kg/cm 11 1 1 1 1 LEON A D OPTIONS LC Megatron furnished without a circulator. FM Megatron with 3 legs, 3 ½ feet and 5 degree braces front and back for mounting to floor in center of room. FS Megatron with legs to floor(shipped separate) to support the unit without hangers. CAB Megatron with SS cabinet around mixing valve PUMPS edundant recirculation pump PUMPS H High temperature loop recirculation pump HBP High temperature by-pass flush with locking ball valve OPTIONS * OPTIONS (shown on next page) * AL Audio Visual Alarm LC Less circulator DU emote Display Unit FM Floor mount LMS-1-P Leonard FS Free standing Monitoring system CAB Cabinet around mixing valve LMS-1-P-BMS Leonard PUMP-edundant recirculator Monitoring system pump with module to PUMPH-High temperature loop connect to building recirculator pump management HBP- High temperature by-pass flush PIPING OPTIONS * P 1-1 eturn line size (W) P 1-1/ 1-1/ eturn line size (W) P 1-1/ 1-1/ eturn line size (W) * Any option chosen will alter pricing 1 Leonard Valve Company Printed in USA 5 13 Elmwood Avenue, Cranston, I 91 USA Phone: 1.1.1 Fax: 1.91.531 Email: info@leonardvalve.com WEB: http://www.leonardvalve.com
OPTION AL: Leonard Single Probe Digital Temperature Alarm Primary Alarm Box includes: Single Point Temperature Probe - ange: -1ºF to 1ºF esolution: 1ºF User adjustable high & low set points and initial alarm delay period Audible & visual alarms emote alarm contacts (SPDT) with adjustable relay delay period Min./Max. temperature values AL option replaces analog outlet dial thermometer with a single digital display OPTION DU: Leonard emote Display Unit emote Alarm Delay Option Includes: Activation by Primary Alarm s (pictured above) remote alarm contacts Alarm Delay Module with yellow, red, green LED indicators ecommended maximum distance from controller to DU is 5 OPTION LMS-1-P: Leonard Point Digital Monitoring System with Alarm Unit includes: Four () Temperature Probes - ange: -1ºF to 1ºF esolution: 1ºF Audio & visual alarms User adjustable high & low temperature alarm set points Alarm delay period to prevent nuisance alarms emote alarm contacts (SPDT) with adjustable relay period 1/1 Ethernet Connection Web Server Interface for Setup & Commissioning Unit can send an E-mail transmission of alarms for up to contacts Unit can send an E-mail report daily with temperatures readings over the previous day LMS-1-P option replaces analog dial thermometers with a single digital display for all temperatures, incoming hot, incoming cold, outlet and return OPTION LMS-1-P-BMS: Leonard Point Digital Monitoring System with Alarm & Enhanced Protocol Communication Interface Module Primary Alarm Box includes: Four () Temperature Probes - ange: -1ºF to 1ºF esolution: 1ºF User adjustable high & low set points and initial alarm delay period Audio & visual alarms emote alarm contacts (SPDT) with adjustable relay period ProtoNode Accessory Box includes: Interface Module to connect LMS-1-P-BMS to Building Management System (-BMS) Network, Complete Protocol Package Supported protocols include BACnet MS/TP, BACnet IP, Modbus TU, Modbus TCP/IP, SNMP, JC N, available simply by selecting the proper DIP switches Cat 5 Ethernet Cable not included LMS-1-P-BMS option replaces analog dial thermometers with a single digital display for all temperatures, incoming hot, incoming cold, outlet and return 1 Leonard Valve Company Printed in USA 13 Elmwood Avenue, Cranston, I 91 USA Phone: 1.1.1 Fax: 1.91.531 Email: info@leonardvalve.com Web Site: http://www.leonardvalve.com