JOINT ACCREDITATION SYSTEM OF AUSTRALIA AND NEW ZEALAND HELPING MARKETS WORK BETTER AUSTRALIA FECCA House, 4 Phipps Close, Deakin, ACT 2600 PO Box 304, Deakin West, ACT 2605 P: +61 (0)2 6232 2000 NEW ZEALAND Berl House, 108 The Terrace, Wellington 6143 PO Box 10476, The Terrace, Wellington 6143 P: +64 (0)4 473 4426 Accreditation Schedule ORGANISATION CertMark International Pty Ltd CERTIFICATE NUMBER Z4450210AK (Product) LOCATION & COUNTRIES COVERED BY ACCREDITATION Refer to Attachment A ACCREDITATION STANDARDS ISO/IEC 17065:2012 - Conformity assessment - Requirements for bodies certifying products, processes and services Issue Status Issue No: 23 Date: 19 th September 2018 www.iaf.nu www.apec-
SCOPE OF ACCREDITATION PRODUCT CERTIFICATION SCHEMES 1. CodeMark (CM) Scheme Requirements The CodeMark Scheme Rules Australia and New Zealand, Version 2009.1, 27 March 2009 Product Standards Building Code of Australia - all clauses and New Zealand Building Code - all clauses 2. CodeMark Australia Scheme (CMA) Scheme Requirements The CodeMark Australia Certification Scheme Rules, Version 2016.1 Product Standards Building Code of Australia (BCA) 2014 Building Code of Australia (BCA) 2015 Building Code of Australia (BCA) 2016 Building Code of Australia (BCA) 2016 / Amdt 1 3. WaterMark Certification () Scheme Requirements Manual for the WaterMark Certification Scheme Version 2016.1 Product Standards Refer to Attachment B 4. CertMark Product Certification () Scheme Requirements CertMark Australasia Product Certification Scheme Rules Product Standards See standards listed in Appendix B CMI Page 2 of 20
ATTACHMENT A CRITICAL LOCATIONS Head Office 14/76 Wises Rd Buderim, QLD, 4556 OTHER LOCATIONS Nil COUNTRIES JAS-ANZ ACCREDITED CERTIFICATES HAVE BEEN ISSUED Australia, China, New Zealand, United States of America CMI Page 3 of 20
ATTACHMENT B PRODUCT STANDARDS Certification Standard Description Scheme AS 1056.1 Storage water heaters - General requirements AS 1056.2 AS 1056.3 Storage water heaters - Specific requirements for water heaters with single shells Storage water heaters - Specific requirements for water heaters with composite shells AS 1172.1:2005 Water closets (WC) - Pans AS 1172.2:1999 Water closet (WC) pans of 6/3 L capacity or proven equivalent - Cisterns AS 1223 Industrial hand cleaners (petroleum solvent type) AS 1316 Masonry cement AS 1353.1 Flat synthetic-webbing slings - Product specification AS 1357.1 Valves primarily for use in heated water systems - Protection valves AS 1357.2 AS 1432 Valves primarily for use in heated systems - Part 2:Control valves Copper tubes for plumbing, gasfitting and drainage applications AS 1499 Personal flotation devices - Type 2 AS 1512 Personal flotation devices -Type 1 AS 1577 Scaffold Planks AS 1579 Arc-welded steel pipes and fittings for water and wastewater AS 1589:2001 Copper and copper alloy waste fittings CMI Page 4 of 20
AS 1603.1 AS 1603.2 Automatic fire detection and alarm systems - Heat detectors Automatic fire detection and alarm systems - Point type smoke detectors AS 1603.3 Automatic fire detection and alarm systems - Heat alarms AS 1628 Water supply - Metallic gate, globe and non-return valves AS 1631 Cast grey and ductile iron non-pressure pipes and fittings AS 1646:2007 Elastomeric seals for waterworks purposes AS 1672.1 Limes and limestones - Limes for building AS 1741 Vitrified clay pipes and fittings with flexible joints - Sewer quality AS 1788.1 Abrasive wheels - Design, construction, and safeguarding AS 1851 Maintenance of fire protection systems and equipment AS 1910 Water supply - Float control valves for use in hot and cold water AS 2047 Windows in buildings - Selection and installation AS 2049 Roof Tiles AS 2161.6 Occupational protective gloves - Protective gloves for firefighters - Laboratory test methods and performance requirements AS 2182 Sterilizers - Steam - Benchtop AS 2260 Personal flotation devices - Type 3 AS 2345 Dezincification resistance of copper alloys AS 2419.2:2009 Fire hydrant installations - Part 2: Fire hydrant valves CMI Page 5 of 20
AS 2419.3:2012 AS 2537 AS 2638.1 AS 2638.2 Fire hydrant installations - Part 3: Fire brigade booster connections Mechanical jointing fittings for use with crosslinked polyethylene (XLPE) pipes for hot and cold water applications Gate valves for waterworks purposes - Part 1: Metal seated Gate valves for waterworks purposes - Part 1: Resilient seated AS 2792 Fire hose - Delivery layflat AS 2887 Plastic waste fittings AS 3494 Bidettes and bidets AS 3495 Authorization requirements for plumbing products - Stainless steel non-pressure pipes and fittings AS 3496 Metal-bodied and plastic-bodied taps AS 3498 Authorization requirements for plumbing products - Water heaters and hot-water storage tanks, AS 3517 AS 3565.1 Capillary fittings of copper and copper alloy for nonpressure sanitary plumbing applications Meters for cold and heated drinking and non-drinking water supplies - Technical requirements AS 3565.2 Meters for water supply - Combination meters AS 3565.3 AS 3565.5 Meters for water supply - Water meters with integral dual check valves Meters for water supply - Water meters with two integral single check valves CMI Page 6 of 20
AS 3571 AS 3582.1 AS 3582.2 AS 3648 Glass filament reinforced thermosetting plastics (GRP) pipes - Polyester based - Water supply, sewerage and drainage applications Supplementary cementitious materials for use with portland and blended cement - Fly ash Supplementary cementitious materials for use with portland and blended cement - Slag - Ground granulated iron blast-furnace Specification and methods of test for packaged concrete mixes AS 3660.1 Termite management - New building work AS 3688:2005 Water supply - Metallic fittings and end connectors AS 3691 AS 3715 AS 3795 AS 3952 Solvent cement and priming (cleaning) fluids for use with ABS pipes and fittings Metal finishing - Thermoset powder coating for architectural applications of aluminium and aluminium alloys Copper alloy tubes for plumbing and drainage applications Water supply - Spring hydrant valve for waterworks purposes, AS 3972 Portland and blended cements AS 3996 Access covers and grates AS 4032.1 AS 4032.2 Water supply - Valves for the control of heated water supply temperatures - Part 1: Thermostatic mixing valves - Materials design and performance requirements Water supply - Valves for the control of heated water supply temperatures - Part 2: Tempering valves and endof-line temperature-actuated devices CMI Page 7 of 20
AS 4040 Methods of Testing Sheet Roof and Wall Cladding, Method 3: Resistance to Wind Pressures for Cyclone Regions AS 4055 Wind loads for housing AS 4139 Fibre-reinforced concrete pipes and fittings AS 4176.1 AS 4176.2 AS 4176.3 Multilayer pipes for pressure applications - Multilayer piping systems for hot and cold plumbing applications - General (ISO 21003-1:2008 MOD) Multilayer pipes for pressure applications - Multilayer piping systems for hot and cold plumbing applications - Pipes (ISO 21003-2:2008 MOD) Multilayer pipes for pressure applications - Multilayer piping systems for hot and cold plumbing applications - Fittings (ISO 21003-3:2008 MOD),,, AS 4176:1994 Polyethylene / aluminium and cross-linked polyethylene / aluminium macro composite pipe systems for pressure applications AS 4181:1999 Stainless steel clamps for waterworks purposes AS 4256.1 AS 4256.2 AS 4256.3 AS 4256.4 Plastic roof and wall cladding materials - General requirements Plastic roof and wall cladding materials - Unplasticized polyvinyl chloride (upvc) building sheets Plastic roof and wall cladding materials - Glass fibre reinforced polyester (GRP) Plastic roof and wall cladding materials - Unplasticized polyvinyl chloride (upvc) wall cladding boards AS 4256.5 Plastic roof and wall cladding materials - Polycarbonate AS 4654.1 Waterproofing membranes for external above-ground use Materials CMI Page 8 of 20
AS 4662 Ceramic tiles - Definitions, classification, characteristics and marking AS 4758.1 Personal flotation devices - General requirements AS 4794:2001 Non-return valves-swing check and tilting disc AS 4795 Butterfly valves for waterworks purposes AS 4796:2001 Water supply-metal-bodied and plastic-bodied ball valves for property service connection, AS 5039 Security screen doors and security window grilles, AS 5041 Methods of test - Security screen doors and window grilles AS 5062 Fire protection for mobile and transportable equipment AS 6401 Knife gate valves for waterworks purposes AS 6669 Plywood Formwork AS 7240.1 AS 7240.10 AS 7240.11 AS 7240.12 AS 7240.13 AS 7240.15 AS 7240.2 Fire detection and alarm systems - General and definitions Fire detection and alarm systems - Point-type flame detectors Fire detection and alarm systems - Manual call points (ISO 7240-11:2005, MOD) Fire detection and alarm systems - Line type smoke detectors using a transmitted optical beam Fire detection and alarm systems - Compatibility assessment of system components Fire detection and alarm systems - Multisensor fire detectors (ISO7240-15:2004,MOD) Fire detection and alarm systems - Control and indicating equipment (ISO 7240-2:2003, MOD) CMI Page 9 of 20
AS 7240.21 Fire detection and alarm systems - Routing equipment AS 7240.22 AS 7240.4 AS 7240.5 AS 7240.6 AS 7240.7 AS 7240.8 Fire detection and alarm systems - Smoke-detection equipment for ducts (ISO 7240-22:2007, MOD) Fire detection and alarm systems - Power supply equipment (ISO 7240-4:2003, MOD) Fire detection and alarm systems - Point type heat detectors (ISO7240-5:2003, MOD) Fire detection and alarm systems - Carbon monoxide fire detectors using electro-chemical cells Fire detection and alarm systems - Point-type smoke detectors using scattered light, transmitted light or ionization (ISO 7240-7:2003, MOD) Fire detection and alarm systems - Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor AS/NZS 1221 Fire hose reels AS/NZS 1254 AS/NZS 1260:2009 PVC-U pipes and fittings for stormwater and surface water applications PVC pipes and fittings for drain, waste and vent applications AS/NZS 1270 Acoustics - Hearing protectors AS/NZS 1328.1 Glued laminated structural timber - Performance requirements and minimum production requirements AS/NZS 1337 Eye protectors for industrial applications AS/NZS 1337.1 AS/NZS 1337.4 Personal eye protection - Eye and face protectors for occupational applications Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors) CMI Page 10 of 20
AS/NZS 1337.5 AS/NZS 1337.6 AS/NZS 1338.1 Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eyeprotectors) Personal eye protection - Prescription eye protectors against low and medium impact Filters for eye protectors - Filters for protection against radiation generated in welding and allied operations AS/NZS 1477:2006 PVC Pipes and fittings for pressure applications AS/NZS 1546.1 AS/NZS 1546.2 AS/NZS 1546.3 On-site domestic wastewater treatment units - Septic tanks On-site domestic wastewater treatment units - Waterless composting toilets On-site domestic wastewater treatment units - Aerated wastewater treatment systems AS/NZS 1576.1 Scaffolding - General requirements AS/NZS 1576.2 Scaffolding - Couplers and accessories AS/NZS 1576.3 Scaffolding - Prefabricated and tube-and-coupler scaffolding AS/NZS 1576.4 Scaffolding - Part 4: Suspended scaffolding AS/NZS 1576.5 Scaffolding - Prefabricated splitheads and trestles AS/NZS 1576.6 Scaffolding - Metal tube-and-coupler scaffolding - Deemed to comply with AS/NZS 1576.3 AS/NZS 1577:2013 Scaffold decking components AS/NZS 1716:2003 Respiratory protective devices AS/NZS 1730 Washbasins AS/NZS 1801 Occupational protective helmets CMI Page 11 of 20
AS/NZS 1841.1 Portable fire extinguishers - General requirements AS/NZS 1841.2 AS/NZS 1841.3 AS/NZS 1841.4 AS/NZS 1841.5 AS/NZS 1841.6 AS/NZS 1841.7 AS/NZS 1841.8 Portable fire extinguishers - Specific requirements for water type extinguishers Portable fire extinguishers - Specific requirements for wet chemical type extinguishers Portable fire extinguishers - Specific requirements for foam type extinguishers Portable fire extinguishers - Specific requirements for powder type extinguishers Portable fire extinguishers - Specific requirements for carbon dioxide type extinguishers Portable fire extinguishers - Specific requirements for vaporizing liquid type extinguishers Portable fire extinguishers - Specific requirements for non-rechargeable type extinguishers AS/NZS 1859.1 Reconstituted wood-based panels - Specifications - Particleboard AS/NZS 1859.2 Reconstituted wood-based panels - Specifications - Dryprocessed Fibreboard AS/NZS 1859.3 Reconstituted wood-based panels - Specifications - Decorative overlaid wood panels AS/NZS 1859.4 Reconstituted wood-based panels - Specifications - Wetprocessed Fibreboard AS/NZS 1860.1 Particleboard Flooring - Specification AS/NZS 1891.1 Industrial safety belts and harnesses AS/NZS 1891.2 Industrial fall-arrest systems and devices - Horizontal lifeline and rail systems CMI Page 12 of 20
AS/NZS 1891.3 Industrial fall-arrest systems and devices - Fall-arrest devices AS/NZS 1892.1 Portable ladders - Metal AS/NZS 1892.2 Portable ladders - Timber AS/NZS 1892.3 Portable ladders - Reinforced plastic AS/NZS 2080 Safety glazing for land vehicles AS/NZS 2161.6 Occupational protective gloves - Part 6: Protective gloves for firefighters-laboratory test methods and performance requirements AS/NZS 2208 Safety glazing materials in buildings AS/NZS 2210.2 Safety, protective and occupational footwear - Guide to selection, care and use AS/NZS 2210.3 Occupational protective footwear. Safety footwear AS/NZS 2210.4 AS/NZS 2210.5 Occupational protective footwear - Specification for protective footwear (ISO 20346:2004, MOD) Occupational protective footwear - Specification for occupational footwear (ISO 20347:2004, MOD) AS/NZS 2269 Plywood - Structural AS/NZS 2270 Plywood and blockboard for interior use AS/NZS 2271 Plywood and blockboard for exterior use AS/NZS 2272 Plywood - Marine AS/NZS 2280:2012 Ductile iron pipe fittings AS/NZS 2290.1 Electrical equipment for coal mines - Introduction and maintenance - For hazardous areas AS/NZS 2343 Bullet-resistant panels and elements CMI Page 13 of 20
AS/NZS 2492:2007 Cross-linked polyethylene (PE-X) pipes for pressure applications AS/NZS 2588 Gypsum plasterboard AS/NZS 2596 AS/NZS 2642.2:2008 AS/NZS 2642.3:2008 AS/NZS 2712 Seat belt assemblies for motor vehicles (ECE Regulation No. 16, MOD) Polybutylene (PB) plumbing pipe systems - Polybutylene (PB) pipe for hot and cold water applications Polybutylene (PB) plumbing pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications Solar and heat pump water heaters - Design and construction, AS/NZS 2803.1 Doors - Security screen - Hinged AS/NZS 2845.1 Water supply - Backflow prevention devices - Part 1: Materials, design and performance requirements AS/NZS 2904 Damp-proof courses and flashings AS/NZS 2906 Fuel containers - Portable-plastic and metal AS/NZS 2908.1 Cellulose-cement products - Corrugated sheets AS/NZS 2908.2 Cellulose-cement products - Flat sheet AS/NZS 3497 Drinking water treatment units - Plumbing requirements, AS/NZS 3499 Water supply - Flexible hose assemblies AS/NZS 3504 Fire blankets AS/NZS 3518:2004 AS/NZS 3582.3 Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications Supplementary cementitious materials for use with portland and blended cement - Amorphous silica CMI Page 14 of 20
AS/NZS 3662:2005 Performance of showers for bathing AS/NZS 3718 Water supply - Tap ware, AS/NZS 3879 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings AS/NZS 3982:1996 Urinals AS/NZS 4020 Testing of products for use in contact with drinking water AS/NZS 4058 Precast concrete pipes (pressure and non-pressure) AS/NZS 4067 Firefighters' helmets AS/NZS 4129 Fittings for polyethylene (PE) pipes for pressure applications, AS/NZS 4130 Polyethylene (PE) pipes for pressure applications AS/NZS 4130:2009 Polyethylene (PE) pipes for pressure applications AS/NZS 4131 AS/NZS 4158 Polyethylene (PE) compounds for pressure pipes and fittings Thermal-bonded polymeric coatings on valves and fittings for water industry purposes AS/NZS 4200.1 Pliable building membranes and underlays - Materials AS/NZS 4261 AS/NZS 4327 Reusable containers for the collection of sharp items used in human and animal medical applications Metal-banded flexible couplings for low-pressure applications AS/NZS 4357 Structural laminated veneer lumber Specifications AS/NZS 4401 AS/NZS 4422 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethene (PE) Playground surfacing - Specifications, requirements and test method CMI Page 15 of 20
AS/NZS 4441:2008 Oriented PVC (PVC-O) pipes for pressure applications AS/NZS 4455.1 AS/NZS 4455.3 Masonry units, pavers, flags and segmental retaining wall units - Masonry units Masonry units, pavers, flags and segmental retaining wall units - Segmental retaining wall units AS/NZS 4765:2007 Modified PVC (PVC-M) pipes for pressure applications AS/NZS 4766 Polyethylene storage tanks for water and chemicals AS/NZS 4821 AS/NZS 4824 Protective footwear for firefighters - Requirements and test methods Protective clothing for fire fighters, requirements and test methods for protective clothing used for wildland fire fighting (ISO 15384; 2003, MOD) AS/NZS 4858 Wet area membranes AS/NZS 4859.1 AS/NZS 4936 AS/NZS 4967 AS/NZS 5065:2005 ATS 5200.007 ATS 5200.012:2005 ATS 5200.016 Materials for the thermal insulation of buildings - General criteria and technical provisions Air admittance valves (AAVs) for use in sanitary plumbing and drainage systems Protective clothing for firefighters - Requirements and test methods for protective clothing used for structural firefighting Polythene and polypropylene pipes and fittings for drainage and sewerage applications products Part 007: Water hammer arrestors products Part 012: Control/isolating valves products Part 016: Cistern inlet valves CMI Page 16 of 20
ATS 5200.017 ATS 5200.020 ATS 5200.021 ATS 5200.030 ATS 5200.037.2 ATS 5200.053 ATS 5200.105 ATS 5200.458 ATS 5200.461 ATS 5200.462 ATS 5200.471 products Part 017: Cistern outlet valves products Part 020: Flushing valves for water closets and urinals - For use with mains supply products Part 021: Flushing valves for water closets and urinals - or use with break tank supply products Part 030: Solenoid valves products - Flow controllers - For use in heated or cold water plumbing systems Technical specifications for plumbing and rainage products - Stainless steel pipes and tubes products Part 105: Appliances - Beverage dispensers and icemakers products Part 458: Universal transition fitting products Part 461: Stainless steel tubes and mechanical compression fittings for pressure applications products Part 462: Rainwater tank connection valve Technical specification for plumbing and drainage products - Stainless steel tubes and mechanical compression fittings for pressure applications - Alternative systems BS 3193 Glass for domestic appliances BS EN 1057 Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications CMI Page 17 of 20
EN 13598-1 EN 295 EN 356 EN 877 Plastics Piping Systems For Non-Pressure Underground Drainage And Sewerage - Unplasticized Poly(Vinyl Chloride) (Pvc-U), Polypropylene (Pp) And Polyethylene (Pe) - Part 1: Specifications For Ancillary Fittings Including Shallow Inspection Chambers Vitrified clay pipes and fittings and pipe joints for drains and sewers (all parts) Glass In Building - Security Glazing - Testing And Classification Of Resistance Against Manual Attack Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance ISO 16073 Wildland firefighting personal protective equipment - Requirements and test methods TS 004 Urinal Flushing Cisterns TS 006 TS 006-2014 : WaterMark Technical Specification - Reflux valves Sewerage TS 012 In-line valves for use in plumbing water supply systems Miscellaneous types metallic and non-metallic TS 014 Jointing materials TS 016 Cistern inlet valves TS 017 Cistern outlet valves TS 020 TS 021 Flushing valves for water closets and urinals For use with mains supply Flushing valves for water closets and urinals For use with break tank supply TS 028 Commercial food waste disposal unit TS 030 Solenoid valves CMI Page 18 of 20
TS 033 TS 037.1 TS 040 Spraying apparatus/dispensing units with the option of chemical additions Hose connected Flow controllers For controlling flows in cold or heated water systems Waste pipe connection outlets and gratings, separate or integral TS 042 Roll-grooved jointing systems TS 046 Diversion systems Wash down and first flush TS 047 Self-sealing devices TS 050 Prefabricated bathroom modules TS 051 Bidet douche seats TS 052 Metallic-bodied inlet pressure control valves greater than DN 50 TS 101 Appliances (low hazard rating) TS 103 Water treatment systems (other than those specified in AS/NZS 3497) TS 104 Appliances (miscellaneous) TS 105 Appliances Beverage dispensers and icemakers TS 420 Trap-priming valves TS 453 Heated water systems Thermostatic circulation valve TS 459 Waterless urinals Wall hung TS 460 Grey water diversion device (GWDD) TS 463 Pressure attenuator TS 464 Hot water manual or sensor-activated pumping systems CMI Page 19 of 20
TS 466 Rainwater tank connection devices TS 467 Rainwater tank connection valve TS 468 Hot water systems Recirculation valves TS 469 Waterless or limited flush urinals With an integral sealing device TS 472 Heated water system recirculation device 2 TS 476 Heated Water Systems Leak protection device TS 477 Rainwater/mains supply changeover devices TS 478 Cross-linked polyethylene/aluminium/ Cross-linked polyethylene macro-composite pipe systems for pressure applications TS 479 Flood stop safety valve TS 481 Thermal switching valves TS 485 Pressure compensating tank WSA 109 Flange gaskets and O-rings CMI Page 20 of 20