FETURES & SPECIFICTIONS INTENDED USE linear 2 x 3 fixture for distinctive architectural lighting plans. Ideal for corridors, lobbies, and office areas,2 x 3 fixtures can be installed individually or in a continuous run. Specially designed for direct/indirect lighting with snap in lensto hide the lamps or LED arrays. Ideal where and uplight are required. Suitable for Dry and Damp locations. HOUSING Die-formed and welded 22-gauge cold rolled steel Knockouts on ends allow continuous wireway mounting. Housing is specially designed for direct/indirect lighting with separating lamps compartments for each. DIFFUSERS Fixture accepts various lenses or louvers. 4 and 8 units have a steel mullion to join two individual diffusers. Snap in reflector is ideal for uplight lens. ORDERING INFORMTION 4 FT-UP and DOWN LIGHT 23W 48L 23W Wall Mounted 48L 48" Up Light 12 System Watts, UR12WD24W Down Light 24 System Watts, 3600 Delivered Lumens UR18WD36W Snap In Frosted crylic Lens (85% transmission) UR12WD24W Up Light 18 System Watts, Down Light 36 System Watts, 5400 Delivered Lumens 4 FT-UP LIGHT ONLY or DOWN LIGHT ONLY 23 4ft / Recessed Mount/ MOUNTING Fixtures can be surface mounted to the ceiling or pendant hung by stem or cable. TYPICL OPTIONS ND CCESSORIES Cord sets, whips, occupancy sensors Hanging kits, Wire guards. Contact factory for additional options. FID HC3015WWH HC3025WWH Example: 23W48LUR12WD24WWH WH 2.00 Example: 48LUR26W2600LWH 3.600 48L U R26W2600L WH 23W Wall Mounted 23R Recess Mounted, 23RR 1/2" Recess Flanged For Before Drywall installation 23RF Flanged For Exiting Drywall installation 48L 48" R26W2600L R38W3800L R45W4500L U Up Light Only Blank Down Light Only 26 System Watts, 2600 Delivered Lumens 38 System Watts, 3800 Delivered Lumens 45 System Watts, 4500 Delivered Lumens Snap In Frosted crylic Lens (85% transmission) FID HC3015WW HC3025WW *23R-Designed for standard 1" grid. Consult factory for custom made grid size.
8ft DIMENSIONS ll dimensions are inches. Specifications subject to change without notice. 3.600 ORDERING INFORMTION 8 FT-UP and DOWN LIGHT 23W 96L UR24WD48W Example: 23W96LUR24WD48WWH WH 96L 96" Up Light 24 System Watts, UR24WD48W Down Light 48 System Watts, 7200 Delivered Lumens UR36WD72W Snap In Frosted crylic Lens (85% transmission) Up Light 36 System Watts, Down Light 72 System Watts, 10800 Delivered Lumens 8 FT-UP LIGHT ONLY or DOWN LIGHT ONLY FID HC3015WWH HC3025WWH Example: 96LUR52W5200LWH 96L U R52W5200L WH 23W Wall Mounted 23R Recess Mounted, 23RR 1/2" Recess Flanged For Before Drywall installation 23RF Flanged For Exiting Drywall installation 96L 96" R52W5200L R76W7600L R90W9000L U Up Light Only Blank Down Light Only 52 System Watts, 5200 Delivered Lumens 76 System Watts, 7600 Delivered Lumens 90 System Watts, 9000 Delivered Lumens Snap In Frosted crylic Lens (85% transmission) FID HC3015WWH HC3025WWH *23R-Designed for standard 1" grid. Consult factory for custom made grid size.
Dimensions ll dimensions are inches. Specifications subject to change without notice WLL MOUNT 48L Drawing 13.333 KEYHOLE DISTNCES 40.000 13.333 13.333 2.250 2 2 44.000.875 KNOCKOUT DISTNCES WLL MOUNT 96L Drawing KEYHOLE DISTNCES SECTION - 31.336 88.000 25.328 31.336 2.250 46.000 46.000 9.875 KNOCKOUT DISTNCES Plug in system *Consult factory for more options. - it's for continuous run application by simply plugging in sections together Part Number Descriptions PI1 3 Wires Harness, Including White, Black and Green PI2 4 Wires Harness, Including White, Black, Green and Blue for Emergency Battery Backup PI3D 5 Wires Harness, Including White, Black, Green, Violet and Gray * dd the accessries part numbers at the end to be factory installed
PENDNT/SURFCE MOUNT 48L Drawing 1.240 KEYHOLE DISTNCES 1.240 45.700 1.200 48.180.500 KNOCKOUT DISTNCES 46.500 SECTION - 44.000.875 KNOCKOUT DISTNCES PENDNT/SURFCE MOUNT 96L Drawing 1.240 KEYHOLE DISTNCES 1.240 45.700 48.000 1.200 96.180.500 KNOCKOUT DISTNCES 47.200.875 KNODKOUT DISTNCES 44.800
Recessed Mount Linear Fixture RECESSED MOUNT (RF) 48L Drawing 50.000 FLNGE LENGTH HEIGHT WITH LENS 2.076 48.172 FLUSH FLNGE RECESS Recessed Mount (RF).875 KNOCKOUT DISTNCES 2.048 2.048 44.000 4.000 FLNGE LENGTH HEIGHT WITH LENS.500 RECESSED FOR DRYWLL RECESSED MOUNT(RR) 96L Drawing 2.076 98.000 FLNGE LENGTH RECESS FOR DRY WLL Recessed Mount (RR) *consult factory for custom flange depth 96.172 2.086 47.200.875 KNOCKOUT DISTNCES 44.800 2.086.798.500 KNOCKOUT DISTNCES.798 4.000 FLNGE LENGTH
Recessed Mount for T-Bar Ceiling RECESSED MOUNT (R) 48L Drawing 2.520 47.324 B 47.870 KEYHOLE DISTNCES 45.570 C 1.200.500 KNOCKOUT DISTNCES SECTION - 46.370.273 43.870 1.434.875 KNOCKOUT DISTNCES DETIL B RECESSED MOUNT (R) 96L Drawing END BRCKET DESIGNED TO SIT OVER VRIOUS SIZED GRID 95.324 B DETIL C 95.870 KEYHOLE DISTNCES 93.570 45.070 48.500 1.200 47.185.500 KNOCKOUT DISTNCES 47.185 47.135.875 KNOCKOUT DISTNCES 44.735
Recessed Mount Linear Fixture Dimensions ll dimensions are inches. Specifications subject to change without notice Flange Details Type RR Recess for Drywall/ Hard Ceiling -RR (1/2 inch) -RR650 (5/8 inch) -RRxxx (custom depth) ppearance Type RF Flush for Drywall Flanged ppearance Type R For 1" T-bar ppearance *23R-Designed for standard 1" grid. Consult factory for custom made grid size.