Pressure Balanced Thermostatic Mixers FM Mattsson Pressure Balanced Thermostatic Mixing Valves (PBTMVs) are designed to deliver tempered water at an even, preset temperature by compensating for any changes of pressure or temperature in the incoming hot and cold water. They are usually used with single outlet fixtures but can be used to control more than on fixture. F M Mattsson PBTMV s can cope with sudden pressure peaks. F M Mattsson PBTMV s can cope with fluctuating temperatures. Due To Mattsson s world patent cartridge, the mixed water temperature will stay within + or 1 of the set temperature. WARRANTY (Terms, conditions and proof of purchase apply. Contact MA Griffith for full details.) Control Cartridge - 10 years plus 5 years on replacemen cartridges purchased after the 10 year period Component Parts - 5 years Labour - 12 months Check Local and National Codes for any compulsory service requirements. APPROVALS Australian Standard 4032.1 - Water Supply Valves for the control of heated water supply temperatures - Thermostatic mixing valves. Materials design and performance requirements. NSW Health Department - RBA5190-8070, RBA5193-8070 and the RBA9230 series of PBTMVs only. FEATURES & BENEFITS One Pressure Balanced Thermostatic Mixing Valve is able to supply TEMPERED water to multiple outlets in a bathroom. One world patented control cartridge, common to all FM Mattsson PBTMVs, provides both thermostatic control and pressure balancing. No more unpleasant showers, always a constant temperature + or - 1 C. Thermal shut off prevents scalding in the event of cold water supply failure. Safe for people of all ages temperature knob supplied with child safety lock to prevent scalding (mechanism can be manually overridden by an adult). Also available with fixed temperature knobs to prevent unauthorised interference. Also available in stainless steel cabinets for concealed installation. Complete with built-in line strainers/non return valves on both hot and cold inlets. All valves are factory pre-set to 38 C (can be re-calibrated by a licensed plumber). Maximum Dynamic Ratio 13:1. Supplied with 20mm inlets (except RBA5190, RBA9219, RBA9250 and RBA9230 which are supplied with 15mm inlets) and 15mm outlets. RBA5193 is supplied with one 20mm outlet and one 15mm outlet (can be used for high flow demand such as shower blocks). Brass bodies are made from DR (dezincification resistant) brass. Helps save on water and energy bills due to increased efficiency. INSTALLATION REQUIREMENTS Cold water supply temperature 5 C - 25 C Hot water supply temperature 50 C - 80 C Water supply pressure Recommended working pressure Pressure tested to Min flow rate 50-1000kPa 100kPa - 700kPa 1600kPa 1 litres/minute Check Local & National Codes for any specific installation requirements. 1/6 Australia 1 788 778 sales@rba.com.au www.rba.com.au
RBA9230 Pressure Balanced Thermostatic Mixing Valve # APPLICATION Suitable for hospitals, nursing homes and child care centres. This unit is designed to deliver tempered water to single or multi point installations without the risk of unauthorised persons altering the preset temperature or flow. INSTALLATION Mixer is fitted with 15mm BSP inlet nipple. RBA9230 PB Thermostatic Mixing Valve FEATURES Thermostatic temperature control and pressure balancing control all in one cartridge. Inbuilt non return valves and filters. Fixed temperature knob. No flow control knob. Can b e supplied pre- plumbed in a stainless steel box Always a constant temperature of + or - 1 C. Factory pre-set to 38 C (can be re-calibrated by plumber). Operates from Min 50kPa to Max 1000kPa. Recommended working pressure 100kPa to 500kPa. 10 year warranty on cartridge. Made in Sweden. OPTIONS Refer to Optional Items and Accessories for details. Flow Diagram Pressure drop graph COLOURS Valve - Raw brass Temperature knob - Red APPROVALS AS4032.1 & NSW HEALTH DEPARTMENT Manufactured in DR brass MODELS RBA9230-8070 Pressure [kpa] 1000 100 10 0.01 0.10.5 1.00 Flow [l/s] # Bath/Shower/Basin/Multi-Point Application Flow Table Pressure(kPa) Flow (L/min) 100 15.5 200 22.5 28 400 32.5 500 36.5 600 40.3 2/6 Australia 1 788 778 sales@rba.com.au www.rba.com.au
RBA9230 Pre-plumbed Pressure Balanced Thermostatic Mixing Valve RBA9230 Pre-plumbed PBT Mixing Valve APPLICATION Suitable for hospitals, nursing homes, child care centres and public areas. This unit is designed to deliver tempered water to single or multi point installations without the risk of unauthorised persons altering the preset temperature or flow. INSTALLATION The RBA9230 valve has been pre-plumbed with 20mm isolating ball valves and pipework, and comes supplied in high quality stainless steel box ( x x 75mm) for concealed and exposed installation. 1000 Flow Diagram Pressure drop graph FEATURES Utilises the RBA9230 Pressure Balanced Thermostatic Bath/ Shower/Mixer (with fixed temperature knob). The box has been purposely designed with pilot holes for easy fixing to stud work and 100mm extended pipes for joining to existing pipe work. Branch in cold water inlet pipe with 20mm ball valve to enable continuous supply of cold water whilst the mixer is being serviced. Binder Test Point for easy calibration. Lockable lid is keyed alike. Operates from Min 50kPa to Max 1000kPa. Recommended working pressure 100kPa to 500kPa. Made in Sweden. Pressure [kpa] 100 APPROVALS AS4032.1 & NSW HEALTH DEPARTMENT Manufactured in DR brass # Bath/Shower/Basin/Multi-Point Application 10 0.01 0.10.5 1.00 Flow [l/s] 3/6 Australia 1 788 778 sales@rba.com.au www.rba.com.au
RBA9230 Pre-plumbed Pressure Balanced ( x x 75mm Stainless Steel Box) Thermostatic Mixing Valvesd (330 x 330 fas x 1.5mm Panel Door df 4 Pipes One Way 4 Pipes Two Ways RBA9230-0001 Concealed box RBA9230-0003 Exposed box RBA9230-0002 Concealed box RBA9230-0004 Exposed box 3 Pipes One Way 3 Pipes Two Ways 110 RBA9230-0005 Concealed box RBA9230-0007 Exposed box RBA9230-0006 Concealed box RBA9230-0008 Exposed box 4/6 Australia 1 788 778 sales@rba.com.au www.rba.com.au
MAG Mattsson Standard Box with Flat Panel Door Box Size mm x mm x 75mm - Panel door on recessed box is 330mm x 330mm x 1.5mm RBA9230-0001 = 4 pipes one way with Cold Water Bypass (recessed box) RBA9230-0002 = 4 pipes two way with Cold Water Bypass (recessed box) RBA9230-0003 = 4 pipes one way with Cold Water Bypass (wall mounted box) RBA9230-0004 = 4 pipes two way with Cold Water Bypass (wall mounted box) RBA9230-0005 = 3 pipes one way (recessed box) RBA9230-0006 = 3 pipes two way (recessed box) RBA9230-0007 = 3 pipes one way (wall mounted box) RBA9230-0008 = 3 pipes two way (wall mounted box) MAG Mattsson Mark II Optional Box ( Made to order only) Mattsson Mark II Box with Door and Frame type finish (DF) Box Size mm x mm x 75mm - Door and Frame on recessed box is 355mm x 355mm x 1.5mm RBA9230-DF01 = 4 pipes one way with Cold Water Bypass (recessed box) RBA9230-DF02 = 4 pipes two way with Cold Water Bypass (recessed box) RBA9230-D003 = 4 pipes one way with Cold Water Bypass (wall mounted box) RBA9230-D004 = 4 pipes two way with Cold Water Bypass (wall mounted box) RBA9230-DF05 = 3 pipes one way (recessed box) RBA9230-DF06 = 3 pipes two way (recessed box) RBA9230-D007 = 3 pipes one way (wall mounted box) RBA9230-D008 = 3 pipes two way (wall mounted box) MAG Mattsson Special Plumbing Configurations (SPCs) SPCs are plumbed into various size boxes, please ensure the box size meets your requirements. All boxes are fitted with flat panel door 35mm larger than box size. RBA9230-0013 = 5 pipe system one way includes cold and hot water bypass (recessed box) RBA9230-0013W = 5 pipe system on way includes cold and hot water bypass (wall mounted box) Box size 350 x x 75 with flat panel door RBA9230-0014 = 6 pipe system one way includes cold water bypass and rainwater connection (recessed box) RBA9230-0014W = 6 pipe system one way includes cold water bypass and rainwater connection (wall mounted box) Box size 400 x x75 with flat panel door RBA9230-0015 = 7 pipe system one way includes cold and hot water bypass and rainwater connection (recessed box) RBA9230-0015W = 7 pipe system one way includes cold and hot water bypass and rainwater connection (wall mounted box) Box size 400 x x 75 with flat panel door RBA9230-ECC1 = 4 pipe system one way includes electronic component compartment (recessed box) RBA9230-ECC1W = 4 pipe system one way includes electronic component compartment (wall mounted box) Box size 450 x 350 x 75 with flat panel door TMV Box Only RBAMAG-01 = Stainless Steel TMV box only, with flat panel door Box size x x 75 Panel door recessed box 335mm x 335mm x 1.5mm RBAMAG- 02 = Stainless Steel box only, with door and frame Box size x x 75 Door and frame on recessed box 335mm x 335mm x 1.5mm 5/6 Australia 1 788 778 sales@rba.com.au www.rba.com.au
RBA5193 Pressure Balanced Thermostatic High Flow 3/4 Mixing Valve (With Fixed Temperature Knob) APPLICATION Suitable for hospitals, nursing homes, child care centres, multi pointing bathroom outlets, disabled facilities, large spa pools, gymnasiums, photo labs, hair dressing salons or food processing. For use anywhere a constant temperature is required. INSTALLATION Comes with 20mm hot and cold inlets with dual outlets 1x15mm and 1x20mm. This unit must have flow control devices fitted between it and each outlet. RBA5193 PBT High Flow 3/4 Mixing Valve FEATURES Thermostatic temperature control and pressure balancing control in one cartridge. Lock shield temperature knob for fixed temperature installation. Capable of delivering high volumes oftempered water. No more unpleasant showers, always a constant temperature + or - 1 C. Factory pre-set to 38 C (can be re-calibrated by plumber). Comes with check valves and line strainers built into the isolating valves supplied with the valve. Operates from Min 50kPa to Max 1000kPa. Recommended working pressure 100kPa to 500kPa. 10 year warranty on cartridge. Made in Sweden. Pressure [kpa] Flow Diagram Pressure drop graph 1000 Shower Outlet (unrestricted) Bath/Tub Outlet (unrestricted) 100 10 0.01.5 1.0 Flow [l/s] 10.0 OPTIONS Wall mounted stainless steel bracket. Refer to Optional Items and Accessories for details. COLOURS Raw brass APPROVALS AS4032.1 & NSW HEALTH DEPARTMENT Manufactured in DR brass MODELS RBA5193-8070 Pressure(kPa) Flow Table 15mm Outlet Flow (L/min) 20mm Outlet Flow 100 17 36 200 24 29.5 75 400 34 500 38 97.5 600 41.5 6/6 Australia 1 788 778 sales@rba.com.au www.rba.com.au