CALEFFI. Thermostatic mixing valves with replaceable cartridge for centralized systems. 5230, 5231 series 01080/13 NA ASSE Replaces 01080/11 NA
|
|
- Phoebe Pope
- 5 years ago
- Views:
Transcription
1 Thermostatic mixing valves with replaceable cartridge for centralized systems 3, 3 series CCREDITED ISO 9 FM ISO 9 No. 3 /3 N Replaces / N Function The thermostatic mixing valve is used in systems producing domestic hot water or in radiant panel heating systems. Its function is to maintain the temperature of the mixed water supplied to the user at a constant set value when there are variations in the supply pressure and temperature of the incoming hot and cold water or in the flow rate. The 3 and 3 series thermostatic mixing valves are SSE 7 approved for point of distribution and are designed specifically for systems requiring high flow rates and precise, stable temperature control. SSE 7 Product Range Code 3_ djustable thermostatic mixing valve with replaceable cartridge... connections, -/, -/, NPT male union Code 3_ djustable thermostatic mixing valve with replaceable cartridge... connections sweat Code 3_ djustable thermostatic mixing valve with replaceable cartridge... connections 3/",, -/ sweat union Code 37 djustable thermostatic mixing valve with replaceable cartridge and outlet temperature gauge... connection -/ sweat union Technical specification Materials: - Body: Brass - Shutter: Brass, chemical nickel plated - Springs: Stainless steel - Seals: EPDM Medium: Water Maximum percentage of glycol: 3% glycol solution Setting range: See table on page 3 Temperature stability: ± F (± 3 C) Max working pressure (static): psi ( bar) Max working pressure (dynamic): 7 psi ( bar) Hot water inlet temperature range: F (9 C) Cold water inlet temperature range: F (.. C) Maximum inlet pressure ratio (H/C or C/H): : Minimum temperature difference between hot water inlet and mixed water outlet for optimum performance: F ( C) Maximum water hardness: grains pproved for SSE 7 SSE 7 D F E Code B C MIN MX 7 B Sweat version B C D E F 3/" SW 3/" /" " SW " NPT " SW /" NPT /" SW /" SW /" NPT " NPT /" 7/" 3 9/" /" 3 /" 3 /" 3/" 3/" 7/" 7/" 7 /" 9 /" 7 /" 7 /" /" 3/" /" /" /" 7 3/" /" 7 /" 7 /" 9 3/" 9 3/" D E 9 3 F /" /" 3 7/" /" /" 3 7/" 3 3/" 3 7/" 3/" 3 7/" 3 3/" 3 7/" 7/" 3 7/" /" /" /" /" Weight (lb)
2 Dimensions Legionella - Scalding risk In systems producing domestic hot water with storage, in order to avoid the dangerous infection known as Legionella, the hot water must be stored at a temperature of at least F. t this temperature it is certain that the growth of the bacteria causing this infection will be totally eliminated. However, at this temperature the water cannot be used directly, as it may cause scalding. For example, at 3 F, partial burning takes place in 3 seconds and at F total burning takes place in seconds. In view of the above, it is necessary to install a thermostatic mixing valve which can: reduce the temperature at the point of use to a value lower than that of storage; maintain this value when the incoming pressure and temperature conditions vary. Thermal disinfection The diagram below shows the behavior of the bacteria Legionella Pneumophila when the temperature conditions of the water in which it is contained vary, in laboratory sample population. In order to ensure proper thermal disinfection, the value must not be below F. Kills bacteria instantly Kills 9% of bacteria in minutes Kills 9% of bacteria in hours Optimum temperature for growth of bacteria Principle of Operation thermostatic mixing valve mixes hot and cold water in such a way as to maintain a constant set temperature of the mixed water at the outlet. thermostatic element is fully immersed into the mixed water. It then contracts or expands causing movement of the piston, closing either the hot or cold inlets, regulating the flow rates entering the valve. If there are variations of temperature or pressure at the inlets, the internal element automatically reacts attempting to restore the original temperature setting. Thermal shutoff In the event of a failure of either the hot or cold supply, the piston will shut off, stopping water discharging from the mixed water outlet. The Caleffi valve requires a minimum temperature differential from hot inlet to mixed water outlet of F ( C) to ensure the correct operation of the thermal shutoff feature. Constructional details Double seat The mixing valve has a special actuator which acts on a double water passage seat. This guarantees a high flow rate with a reduced resistance, at the same time maintaining accurate temperature regulation. Replaceable cartridge The internal cartridge containing all the regulating components is pre-assembled in a single unit and can easily be inspected for cleaning or replacement if necessary, without the need to remove the valve body from the pipework. nti-wear surfaces ll the working parts such as shutter, seats and slide guide are chemical nickel plated. This treatment reduces the wearing and scaling to a minimum and guarantees the maintenance of performance over time. Low inertia thermostat The temperature-sensitive element, the motor of the thermostatic mixing valve, is characterised by a low heat inertia; this means that it reacts rapidly to variations in the incoming temperature and pressure conditions, reducing the valve response times. Temperature setting and locking The control knob permits temperature setting, between min. and max., in one turn (3 ). It also has a tamper-proof system to lock the temperature at the set value. 3 Surviving bacteria inactive Reference documents With regard to the prevention and control of Legionella, see the National Regulations and applicable Code of Practice. MIXED
3 Point of Distribution SSE 7 pproved Dp (psi) Code Description Flow 3 3/ Union Sweat. Cv 3 Union Sweat. Cv Setting the temperature The temperature is set to the required value by means of the adjusting knob with the graduated scale on the top of the valve. 3 Replacement Cartridge code 3 Code Description Flow 3 Union Thread NPT male Cv 3 Union Sweat Cv 37 -/ Union Thread NPT male Cv 37 -/ Union Sweat Cv 37 -/" Union Sweat with gauge Cv Replacement Cartridge code 3 Code Description Flow 3 -/ Union Thread NPT male 7 Cv 39 Union Thread NPT male Cv Replacement Cartridge code Flow curve 3/ / / 3 p (psi) (bar) Use Caleffi 3 series thermostatic mixing valves are designed to be installed at the hot water heater and cannot be used for tempering water temperature at fixtures as a point-of-use valve. They are not designed to provide scald protection or anti-chill service and should not be used where SSE 7 devices are required. Wherever a scald protection feature is required, SSE 7 model mixing valves need to be installed. For safety reasons, it is advisable to limit the maximum mixed water temperature to F. Instantaneous production of hot water Caleffi 3 series thermostatic mixing valves should not be used in conjunction with boilers giving instantaneous production of domestic hot water. Their addition would compromise the correct operation of the boiler itself. Radiant panel heating systems Caleffi Series 3 thermostatic mixing valves can also be used for regulating the flow temperature in radiant panel heating systems, to which it assures a constant and accurate control with ease of installation. Installation Before installing a Caleffi 3 series thermostatic mixing valve, the system must be inspected to ensure that its operating conditions are within the range of the mixing valve, checking, for example, the supply temperature, supply pressure, etc. Systems where the Caleffi 3 series thermostatic mixing valve is to be fitted must be drained and cleaned out to remove any dirt or debris which may have accumulated during installation. Failure to remove dirt or debris may affect performance and the manufacturer s product guarantee. Softened water use is highly recommended as the warranty is voided if used on water with hardness greater than grains. The installation of filters of appropriate capacity at the inlet of the water from the mains supply is always advisable. In areas which are subject to highly aggressive water, arrangements must be made to treat the water before it enters the valve. Caleffi 3 series thermostatic mixing valves must be installed in accordance with the diagrams in this manual, taking into account all current applicable standards. Caleffi 3 series thermostatic mixing valves can be installed in any position, either vertical or horizontal. The following are shown on the thermostatic mixing valves body: - Hot water inlet, color red. - Cold water inlet, color blue. - Mixed water outlet, marked MIX. In systems with thermostatic mixing valves, check valves must be installed to prevent undesirable fluid backflow. The 3-7 models do not contain integral check valves, so those must be sourced separately. It is essential that access to the valve is totally unobstructed for any maintenance which may be required to the valve or connections. The pipework from/to the valve must not be used to support the weight of the valve itself G (l/s) (gpm) Recommended flow rates for temperature stability: 3/ - (3) / / - Min. (gpm). 3 Max. (gpm) 3
4 7 Commissioning fter installation, the valve must be tested and commissioned in accordance with the instructions given below, taking into account current applicable standards. ) Ensure that the system is clean and free from any dirt or debris before commissioning the thermostatic mixing valves. Be sure water hardness is less than grains. ) It is recommended that the temperature is set using a suitable calibrated digital thermometer. The valve must be commissioned by measuring the temperature of the mixed water at the outlet. 3) The maximum outlet temperature from the valve must be set taking account of the fluctuations due to simultaneous use. It is essential for these conditions to be stabilised before commissioning. ) djust the temperature using the adjusting knob on the valve. For safety reasons, it is advisable to limit the maximum mixed water temperature to F in domestic hot water systems. Temperature setting The temperature is set to the required value by means of the knob with the graduated scale, located on the top of the valve. Locking the setting Position the knob at the required value, unscrew the top screw, slide off the knob and put it back in such a way that the handle fits into the internal slot of the knob. Tighten the head screw. 3 MIN M X Replacing the cartridge The internal cartridge, containing all the regulating components, can be inspected and, if necessary, replaced, without the need to dismantle the valve body from the pipework. ) Close the shut-off valves on the hot and cold inlets.set the knob to the maximum value. ) Remove the temperature regulating knob after unscrewing the lock screw at the top. Dismantle the plastic knob frame. Unscrew the brass plated protective cover by means of the hexagon ( - / ). 3) Remove the internal cartridge for inspection or replacement, using a suitably sized spanner. ) Refit the protective brass plated cover. Refit the plastic frame in such a way that the position indicator is visible. ) The spare cartridge is supplied pre-set to the maximum value. Position the regulating knob in such a way that the letters MX align with the position indicator. By rotating the knob clockwise, it should be possible to adjust the value from maximum to minimum. Fix the knob with the top lock screw. ) Reopen the shut-off valves and adjust the thermostatic mixing valves to the required temperature value. 3a 3b
5 MIN MX 7 MIN MX 7 pplications diagrams Radiant panels heating system SSE 7 model application RED BLUE SUPPLY MIX MIN MX 7 MIX RETURN Radiant panel loop Recirculation with point-of-distribution thermostatic mixing valves For domestic recirculating water systems that include a single SSE 7 point-of-distribution thermostatic mixing valve, such as the Caleffi 3 and 3 series thermostatic mixing valves, the piping installation below is recommended. In any recirculating hot water distribution system there will be times when the circulator is operating, but no hot water is being drawn at the fixtures. Under this condition, heat continually dissipates from the piping forming the recirculation loop. If the loop is relatively short, and well insulated, the rate of heat loss should be very small. If the loop is long, and uninsulated, the rate of heat loss could be substantially greater. To maintain the recirculating water at the desired delivery temperature the heat lost from the loop must be replaced. This requires RED some water flow between BLUE the loop and the hot water SUPPLY source. Ideally, this flow is adjusted so that the rate of heat transfer from the hot water source to the loop exactly balances the rate of heat loss from the loop s piping. MIX The figure (above right) shows a bypass valve (), and return valve (), which regulate how much warm water from the return side of the recirculating loop flows back to the storage tank. When there is no demand for hot water at the fixtures, the flow of return water to the tank will equal the rate of hot water RETURN flow from the tank to the inlet port of the mixing valve. Ideally, this flow should be adjusted so that the rate of heat transfer from the tank to the recirculating loop exactly balances the rate of heat loss from the recirculating loop. This allows the water temperature leaving the mixing valve to remain stable. The bypass valve () and possibly the return valve () must be adjusted when there is no domestic water draw on the recirculating loop (when all the fixtures are off). Begin with the bypass valve () fully closed, and the return valve () fully open. Turn on the recirculating circulator and let it run for several minutes. The supply water temperature leaving the mixing valve will likely be lower than the setting of the valve, since there is no return flow to the tank. Slowly open the bypass valve () and monitor the temperature leaving the mixing valve. It will likely begin rising as some water returns to the tank, and an equal flow of hot water moves from the tank to the hot port of the mixing valve. When the temperature leaving the mixing valve remains stable, and is at or very close to the temperature set on the mixing valve, the bypass valve is correctly set. The return valve () can remain fully open unless a situation occurs where the bypass valve () is fully open, but the temperature leaving the mixing valve is still too low. If this occurs, partially close the return valve () to add flow resistance. This forces more flow through the bypass valve (). Repeat the previously described procedure of slowly opening the bypass valve () until the water temperature leaving the mixing valve is stable. Key to symbols Safety relief valve Domestic water system with recirculation SSE 7 model application Check valve Isolation valve Expansion vessel Filter T STORGE WTER HETER MIN MX 7 Pump Globe Valve
6 Code 3_ SPECIFICTION SUMMRIES djustable thermostatic mixing valve with replaceable cartridge. Certified to SSE 7. Threaded connections from to NPT male with unions. Brass body. Brass cartridge chemical nickel plated. Stainless steel springs. Seals in EPDM. Max. operating temperature F ( C). Setting range 77 to 3 F ( to 7 C). Maximum water hardness: grains. Max. working pressure (static) psi. Max. working pressure (dynamic) 7 psi. Tolerance ± F. Provided with tamper-proof temperature locking. Code 3_, 3_ djustable thermostatic mixing valve with replaceable cartridge. Certified to SSE 7. Sweat connections 3/, and / with unions. Brass body. Brass cartridge chemical nickel plated. Stainless steel springs. Seals in EPDM. Max. operating temperature F ( C). Setting range 77 to 3 F ( to 7 C). Maximum water hardness: grains. Max. working pressure (static) psi. Max. working pressure (dynamic) 7 psi. Tolerance ± F. Provided with tamper-proof temperature locking. For -/" size, provide with optional mixed outlet temperature gauge, to F scale, " diameter. We reserve the right to change our products and their relevant technical data, contained in this publication, at any time and without prior notice. Caleffi North merica, Inc. 33 W. Milwaukee Road Milwaukee, WI 3 Tel: -3-3 Fax: -3-3 sales@caleffi.com Copyright Caleffi North merica, Inc.
Thermostatic mixing valves with replaceable cartridge for centralized systems
Thermostatic mixing valves with replaceable cartridge for centralized systems series REGISTERED BS EN ISO 9: Cert. n FM UNI EN ISO 9: Cert. n / N Replaces /9 N Function The thermostatic mixing valve is
More informationCALEFFI. Thermostatic mixing valves, low-lead, high-flow series 01256/18 NA. Replaces 01256/15 NA
Thermostatic mixing valves, low-lead, high-flow 5 series CCREDITED ISO 9 FM 5 ISO 9 No. CLEFFI 5/ N Replaces 5/5 N Function The thermostatic mixing valve is used in systems producing domestic hot water
More informationfunction Adjustable thee-way thermostatic mixing valve... connections 1/2", 3/4", 1" NPT male union and sweat union
mixcal adjustable three-way thermostatic mixing valve series CCREITE ISO 9 FM ISO 9 No. CLEFFI / N Replaces / N LOW LE function The Caleffi MixCal three-way thermostatic mixing valve is used in systems
More informationAdjustable three-way thermostatic mixing valve... connections ½", ¾", 1" NPT male union and sweat union and ¾" press
MixCal djustable three-way thermostatic mixing valve series CCRIT ISO 9 FM ISO 9 No. CLFFI / N Replaces / N Function The Caleffi MixCal series three-way thermostatic mixing valve is used in systems producing
More informationThermostatic mixing valves with interchangeable cartridges
www.caleffi.com R37. Thermostatic mixing valves with interchangeable cartridges Installation, commissioning and servicing instructions 3 Series Function The thermostatic mixing valve is used in systems
More information5231 Series. Low Lead High Flow Thermostatic Mixing Valves. Installation, commissioning and service instructions ASSE 1017 NA10341
NA31 www.caleffi.com Low Lead High Flow Thermostatic Mixing Valves Copyright 1 Caleffi Installation, commissioning and service instructions Function 531 Series ASSE 17 model 531 series high flow thermostatic
More informationCALEFFI. water heater tank mixing valve. TankMixer. 520 series 01267/17 NA
TankMixer water heater tank mixing valve 520 series CLEFFI 01267/17 N CCREDITED ISO 9001 FM 21654 ISO 9001 No. 000 Function The Caleffi TankMixer 520_X series kit combines a three-way thermostatic mixing
More information5231 Series. Low Lead High Flow Thermostatic Mixing Valves. Installation, commissioning and service instructions ASSE 1017 NA10341.
NA3. www.caleffi.com Low Lead High Flow Thermostatic Mixing Valves Copyright 5 Caleffi Installation, commissioning and service instructions Function 53 Series ASSE 7 model 53 series high fl ow thermostatic
More informationInstallation, commissioning and servicing instructions. Technical Characteristics. -Lead Plumbing Law Certifi ed by IAPMO R&T
www.caleffi.com 37. MixCal adjustable three-way thermostatic mixing valve Copyright Caleffi Installation, commissioning and servicing instructions Series Function The Caleffi MixCal three-way thermostatic
More information521 Series. MixCal adjustable three-way thermostatic mixing valve. Installation, commissioning and service instructions
MixCal adjustable three-way thermostatic mixing valve 37. www.caleffi.com Copyright 15 Caleffi 51 Series Installation, commissioning and service instructions Function The Caleffi MixCal three-way thermostatic
More informationCALEFFI. Solar storage-to-boiler thermostatic connection kit series 01164/09 GB. Function
Solar storage-to-boiler thermostatic connection kit 6-63 series REGI STERED BS EN ISO 900:000 Cert. n FM 64 UNI EN ISO 900:000 Cert. n 0003 CLEFFI 064/09 GB Function The solar storage-to-boiler connection
More informationFOR INSTALLING AND USING
FOR INSTALLING AND USING Description and function The Solarmix thermostatic mixing valve is designed to reduce the water temperature to a safer level. Unlike the under basin, or bath/shower type valves
More informationDIRTMAG dirt separator with magnet, adjustable for vertical or horizontal pipe
DIRTMAG dirt separator with magnet, adjustable for vertical or horizontal pipe Copyright 206 Caleffi NA0322.02 www.caleffi.com NA5453 Series Installation, commissioning and servicing instructions Function
More informationInstallation, commissioning and servicing instructions
NA10322.01 www.caleffi.com DIRTMAG dirt separator Copyright 2015 Caleffi NA5453 Series Installation, commissioning and servicing instructions Function In heating and chilled water systems, the circulation
More information281 Series. ThermoBloc boiler protection recirculation and distribution unit. Installation, commissioning and servicing instructions
www.caleffi.com NA1094.01 ThermoBloc boiler protection recirculation and distribution unit Copyright 013 Caleffi Installation, commissioning and servicing instructions 81 Series Function The ThermoBloc
More informationACCREDITED. Function. Code /3 unit without cold water circuit outlet kit
Multi-function compact unit for temperature control, thermal disinfection and distribution for hydraulic and domestic water system 6005 series ACEDITED ISO 9001 FM 21654 01160/17GB replaces dp 01160/08GB
More informationCALEFFI. Set point thermostatic regulating unit. 182 series 01190/18 GB. replaces dp 01190/15 GB
Set point thermostatic regulating unit 8 series FM 65 00 CALEFFI 090/8 GB replaces dp 090/5 GB Function The thermostatic regulating unit is made to be used in radiant panel systems, in combination with
More informationIntatherm Safe Touch Basin Tap IT1008CP
Intatherm Safe Touch Basin Tap IT1008CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept any responsibility
More informationInta City Concealed Shower Mixing Valve CT80010CP
Inta City Concealed Shower Mixing Valve CT80010CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept
More informationDeluge Shower Mixing Valve 10045CP
Deluge Shower Mixing Valve 10045CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept any responsibility
More informationPlus Bath Shower Mixing Valve CP and PL30020CP
Plus Bath Shower Mixing Valve 920000CP and PL30020CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot
More informationunion swing check valve spring loaded check valve purging valve pressure relief valve relief valve metered balancing valve
VENT APPENDIX A: PIPING SYMBOL LEGEND GENERIC COMPONENTS CALEFFI COMPONENTS circulator circulator w/ ThermoBloc union circulator w/ swing check spring loaded balancing balancing w/ gate check globe s purging
More informationTelo Shower Mixing Valve TL10016CP
Telo Shower Mixing Valve TL10016CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept any responsibility
More informationINTA ION MODERN BAR / BATH SHOWER MIXER CP
INTA ION MODERN BAR / BATH SHOWER MIXER 910000CP INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS PLEASE LEAVE THESE INSTRUCTIONS WITH THE USER Page 1 of 10 INTRODUCTION This installation guide has
More informationEnzo Safe Touch Thermostatic Shower EZ10010CP & EZ10014CP
Enzo Safe Touch Thermostatic Shower EZ10010CP & EZ10014CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot
More informationDIRTCAL - DIRTMAG dirt separator
864.07 www.caleffi.com DIRTCAL - DIRTMAG dirt separator Copyright 206 Caleffi 5462-546 -5465-5465M - NA5465 - NA5465M Series Installation, commissioning and servicing instructions Function In heating and
More informationInta City Shower Mixing Valve CT20010CP
Inta City Shower Mixing Valve CT20010CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept any responsibility
More informationInstallation, Operating and Maintenance Guide
Installation, Operating and Maintenance Guide Part no. 780327-C Contents Exposed Exposed Shower Mixing Valve Wall Cover Plate (x2) Strainer (x2) Fixing Screw (x2) Hexagon Key wall Plug (x2) Green Limiter
More informationAutomatic Temperature Controller (ATC)
NEW FROM APOLLO...THE FIRST MULTIPLE-FIXTURE HI-LO MIXING VALVE THAT MEETS ASSE 1017 AND THE NEW ASSE 1069 STANDARD Only Apollo offers fast delivery on the first water temperature mixing assembly to meet
More informationFunction. Pressure Vessel Inspector; CRN registered Sizes 2 4
ISLIRT air and dirt separator series and N RISTR SI N ISO 900:000 ert. n M UNI N ISO 900:000 ert. n 000 LI 0/. N Replaces 0/ N unction ir and dirt separators are used to continuously remove the air and
More informationEnzo Concealed Shower Mixing Valve
Enzo Concealed Shower Mixing Valve EZ40010CP, EZ40013CP & EZ40014CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible.
More informationMercury Mixing Kit (Code: ME1053)
Mercury Mixing Kit (Code: ME1053) The installation and commissioning of the UFH mixing kit system must be exclusively performed by qualified personnel in accordance with the national guidelines and/or
More informationMio Concealed Shower Mixing Valve MI40010CP
Mio Concealed Shower Mixing Valve MI40010CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept any
More informationProduct range Code HE1 Connection and energy management compact unit without anti-condensation valve
Connection and energy management compact unit 2850 series ACCREDITED CALEFFI 01259/14 GB ISO 9001 FM 21654 ISO 9001 No. 0003 Function The connection and energy management compact unit enables combining
More informationAirfield Industrial Estate Hixon Staffordshire ST18 0PF
Deluge Thermostatic Basin Mixer IT1002CP Installation and Maintenance Instructions Intatec Ltd Airfield Industrial Estate Hixon Staffordshire ST18 0PF In this procedure document we have endeavoured to
More informationModel T-45NL: Certified in compliance with ASSE 1017, 1069, 1070, and ANSI/NSF 61 PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING AND OPERATING!
Application Legend thermostatic mixing valves are designed for applications requiring temperature control, scald prevention and reduction of thermal shock in domestic potable water distribution (Model
More informationCALEFFI. Thermostatic regulating unit for heating systems. 166 series 01238/17 GB. replaces dp 01238/15 GB. Function
Thermostatic regulating unit for heating systems 66 series ACCREDITED ISO 9 FM 6 8/7 GB replaces dp 8/ GB Function The thermostatic regulating unit performs the function of keeping the flow temperature
More informationPuro Mini Dual Control Shower Mixer PU90010CP
Puro Mini Dual Control Shower Mixer PU90010CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept
More informationEnzo Safe Touch Thermostatic Shower EZ20011CP & EZ20012CP
Enzo Safe Touch Thermostatic Shower EZ20011CP & EZ20012CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot
More informationKiko Bath Shower Mixing Valve KK90015CP
Kiko Bath Shower Mixing Valve KK90015CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept any responsibility
More informationEnzo and Enzo Deluxe Safe Touch Thermostatic Shower EN10031CP & EN10035CP
Enzo and Enzo Deluxe Safe Touch Thermostatic Shower EN10031CP & EN10035CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as
More informationCALEFFI. Anti-condensation recirculation and distribution unit. 281 series 01224/14 GB. Replaces dp 01224/12 GB. Function
Anti-condensation recirculation and distribution unit 8 series ACCREDITED ISO 900 FM 654 ISO 900 No. 000 CALEFFI 04/4 GB Replaces dp 04/ GB GB Function The anti-condensation recirculation and distribution
More informationHYDRONIC TEMPERING VALVES. Part No. High Temp F. Part No. Low Temp F
34-200 SERIES HYDRONIC TEMPERING VALVES The Apollo Model TV (34-200 Series) thermostatic mixing valve provides non-asse extension of water heater capacity and hot water temperature control in hydronic
More informationTHERMOSTATIC CONTROL TECHNOLOGY HORNE 40 AND 50 THERMOSTATIC MIXING SYSTEMS
CONTROL TECHNOLOGY 40 AND 50 MIXING SYSTEMS 2 APPLICATIONS CONTROLLING TEMPERATURES IN; > hot water supplies distributed to groups of taps or showers. > domestic hot water supplies from large combination
More informationDeluge Concealed Shower Mixing Valve DL40010CP
Deluge Concealed Shower Mixing Valve DL40010CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept
More informationCircuit SolverTM THERMOSTATIC RECIRCULATION VALVE FOR DOMESTIC HOT WATER SYSTEMS.
www.circuitsolver.com The Problem 1 Water flows to the path of least resistance. The Solution Install a Circuit Solver on each hot water supply branch line immediately downstream of the last runout to
More informationTHERMOSTATIC SHOWER VALVE
V8/3 THERMOSTATIC SHOWER VALVE PRODUCT MANUAL INSTALLER Please leave manual with user for future reference to unit operation and maintenance. 1 INTRODUCTION Meynell mixing valves are manufactured within
More informationACCREDITED. Product range Code A2L Pre-assembled set point temperature regulating unit with manifolds and box, with UPM3 Auto L pump
Set point temperature regulating unit series ACCREDITED ISO 9 FM / GB replaces dp / GB Function The temperature regulating unit is made to be used in radiant panel systems, in combination with distribution
More informationTHERMOSTATIC EXPANSION VALVES AND THERMOSTAT CONTROL DEVICES
FUNCTION Thermostatic expansion valves are used to regulate and cut-off the flow of the heat transfer fluid that circulates inside airconditioning system terminals (radiators, fan coils, etc.). Thermostat
More informationThe New Caroma TMV20
specify.caroma.com.au The New Caroma TMV The high performance Caroma TMV Thermostatic Mixing Valve has the capacity to service multiple outlets and features a removable cartridge for ease of service. The
More informationINTADUO THERMOSTATIC BATH/SHOWER MIXER
INTADUO THERMOSTATIC BATH/SHOWER MIXER INSTALLATION, OPERATING AND MAINTENANCE PLEASE LEAVE THESE INSTRUCTIONS WITH THE USER INTRODUCTION This installation guide has been produced for the Inta range of
More informationDIGITAL HOT WATER SOLUTIONS
DIGITAL HOT WATER SOLUTIONS ARMSTRONG IS A TRUSTED GLOBAL LEADER IN INSTANTANEOUS HOT WATER GENERATION, DISTRIBUTION AND PRECISION TEMPERATURE CONTROL With in-depth knowledge and experience that spans
More informationInstallation, Operating and Maintenance Guide
Installation, Operating and Maintenance Guide Part no. 800040-B Contents Exposed Shower Mixing Valve Wall Cover Plate (x2) Strainer (x2) Fixing Screw (x2) Hexagon Key Wall Plug (x2) Green Limiter - 7 litre
More informationThermostatic Radiator Valves (Caleffi)
02/09/16 B46 Thermostatic Radiator Valves (Caleffi) Thermostatic Control Heads Thermostatic control head fits radiator valves Set point locking mechanism Range stop adjustment Built-in sensor with liquid-filled
More informationTHERMOSTATIC EXPANSION VALVES AND THERMOSTAT CONTROL DEVICES
FUNCTION Thermostatic expansion valves are used to regulate and cut-off the flow of the heat transfer fluid that circulates inside airconditioning system terminals (radiators, fan coils, etc.). Thermostat
More informationDEVIATING VALVES ART K063
FUNCTION The flow diverter valve Art.307 makes it possible to supply a branch circuit. Prepared to receive our electro-thermal controls Art. 978, 979, 980 or our thermostatic heads with remote sensor Art.
More informationFM Mattsson. Pressure Balancing Thermostatic Mixing Valves FEATURES. - Different on the inside
Pressure Balancing Thermostatic Mixing Valves Pressure Balancing Thermostatic Mixing Valves (PBTMVs) are designed to deliver a safe, even and constant preset temperature from the incoming hot and cold
More informationTaco 00 Series Cartridge Circulators
Water Circulation Pumps & Circulators Taco 00 Series Cartridge Circulators For over 70 years, Taco has led the industry with the highest quality circulators you can buy. Designed for a wide range of residential
More informationINSTALLATION AND COMMISSIONING MANUAL. Max. operating differential pressure (dynamic):
N3. www.caleffi.com High-flow thermostatic mixing valves Copyright Caleffi 53 Series INSTLLTION ND COMMISSIONING MNUL Function The thermostatic mixing valve is used in systems producing domestic hot water
More informationInstallation S
Installation S59-3045 Thermostatic High-Low Mixing Valve (HL45) with Optional Cabinet S59-3045 (Valve Only) S59-3045RE (with Recess-Mounted Enamel Cabinet) S59-3045RS (with Recess-Mounted Stainless Steel
More informationSeries 1140 and 1141 Temperature Regulators
Hoffman Specialty Installation & Maintenance Instructions HS-504(E) Series 1140 and 1141 Temperature Regulators! CAUTION FOLLOW ALL INSTALLATION AND OPERATING INSTRUCTIONS. TURN OFF WATER OR STEAM BEFORE
More informationPackaged Instantaneous Domestic Hot Water Generator Energy Source: Boiler Water
Packaged Instantaneous Domestic Hot Water Generator Energy Source: Shown with optional boiler water valve and electronic feed-forward control. Operates with low boiler water supply and return temperatures
More informationInstallation S
Installation S59-3080 Thermostatic High-Low Mixing Valve (HL80) with Optional Cabinet S59-3080RE (with Recess-Mounted Enamel Cabinet) S59-3080RS (with Recess-Mounted Stainless Steel Cabinet) S59-3080SE
More informationTechnical Specifications: Your product has a high quality finish and should be treated with care to preserve the visible surfaces.
3 Remove concealing plate KIRI Concealed Mixer Valve ABS Undo nuts (9) on both hot and cold inlets and remove filter washer KIRI VA (6) Installation Instructions & Maintenance Guide 5 Rinse filter washers
More informationInstallation S
Installation S59-2025 Thermostatic Mixing Valve (TMV25) with Optional Cabinet S59-2025RE (with Recess-Mounted Enamel Cabinet) S59-2025RS (with Recess-Mounted Stainless Steel Cabinet) S59-2025SE (with Surface-Mounted
More informationKiko Concealed Shower Mixing Valve KK80010CP
Kiko Concealed Shower Mixing Valve KK80010CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot accept any
More informationShower Panels with a Thermostatic Sequential Control
Products available from Reliance Thermostatic Mixing Valve Thermostatic Shower and Brassware Shower Panels with a Thermostatic Sequential Control Timeflow Controls Electronic Controls Pressure Reducing
More informationAQUABLEND 1500 SOLAR THERMOSTATIC MIXING VALVE
AQUABLEND 1500 SOLAR THERMOSTATIC MIXING VALVE Installation, Operating & Maintenance Instructions ATM715 I00005_Jun 16 NOTE: THIS DOCUMENT IS TO BE LEFT ONSITE WITH FACILITY MANAGER AFTER INSTALLATION
More informationThermostatic Concealed Shower Valve
Thermostatic Concealed Shower Valve Product may differ from image. Please retain this booklet for future aftercare reference Component Breakdown - Three Handle Valve Component breakdown Two Handle Valve
More informationInstallation S
Installation S59-3200 Thermostatic Mixing Valve (HL200) with Optional Cabinet S59-3200RE (with Recess-Mounted Enamel Cabinet) S59-3200RS (with Recess-Mounted Stainless Steel Cabinet) S59-3200SE (with Surface-Mounted
More informationSS-THVD2-1/2 THERMOSTATIC VALVE WITH 2 WAY DIVERTER SS-THVD3-1/2 THERMOSTATIC VALVE WITH 3 WAY DIVERTER
SS-THVD2-1/2 THERMOSTATIC VALVE WITH 2 WAY DIVERTER SS-THVD3-1/2 THERMOSTATIC VALVE WITH 3 WAY DIVERTER Features: Ability to pre-select water temperature thus conserving water Paraffin wax element maintains
More informationInstallation S HL2X2 High Capacity Manifold System. Table of Contents Rev. B; ECN Bradley Page 1 of 8 11/10/2014
Installation S59-3400 HL2X2 High Capacity Manifold System Table of Contents Supplies Required... 3 Rough-Ins... 3 Connect Supply Lines and Install Thermometer... 4 Adjust Temperature and Test Unit... 5
More informationMINIATURE THERMOSTATIC VALVE
SS-TH500-1/2 Features: Ability to pre-select water temperature thus conserving water Compensates for water pressure fluctuations preventing scalding Safety button at 100 F prevents accidental scalding
More informationInstallation Instructions & Maintenance Guide 6 Refit Nuts (19) and tighten.
3 Remove concealing plate KIRI Concealed Mixer Valve With Undo nuts (9) on both hot and cold inlets and remove filter washer Diverter (2 olts & Bath Fill) ABS (6) KIRI 3VDIVA 5 Rinse filter washers (6)
More informationMK 8706 / MB 8706 CONCEALED THERMOSTATIC SHOWER VALVE INSTALLATION GUIDE
MK 8706 / MB 8706 CONCEALED THERMOSTATIC SHOWER VALVE INSTALLATION GUIDE DIMENSIONS 150mm 55mm 200mm 67mm Hot water ¾ BSP Parallel Cold water ¾ BSP Parallel 160mm x 120mm aperture behind face plate for
More informationSATK wall-mounted Heat Interface Unit (HIU) Instantaneous domestic hot water production
SATK wall-mounted Heat Interface Unit (HIU) Instantaneous domestic hot water production SATK0 - SATK0 series ACCREDITED ISO 900 FM 009/ GB replaces dp 009/ GB Function The latest generation of Heat Interface
More informationFM Mattsson. Pressure Balancing Thermostatic Mixing Valves FEATURES. - Different on the inside
Pressure Balancing Thermostatic Mixing Valves Pressure Balancing Thermostatic Mixing Valves (PBTMVs) are designed to deliver a safe, even and constant preset temperature from the incoming hot and cold
More informationCALEFFI. SEP4 combination hydraulic, air, dirt and magnetic separator series 01249/13.1 NA. Replaces 01249/13 NA. Function.
SEP4 combination hydraulic, air, dirt and magnetic separator 5495 series CCREDITED ISO 9001 FM 21654 ISO 9001 No. 0003 CLEFFI 01249/13.1 N Replaces 01249/13 N Product range Function combination hydraulic,
More informationheat interface units A BOILER WITHOUT A FLAME
A BOILER WITHOUT A FLAME heat interface units Communal Heat Networks A central boiler house will generate heat which is distributed through a network of pipe to each home or apartment in the building.
More informationInstallation & Operation Manual Models: TSU
TSU-I-O Rev A Installation & Operation Manual Models: TSU 150-940 CAUTION: This appliance is not intended for potable water. This manual must only be used by a qualified heating installer / service technician.
More informationInstallation and Commissioning Instructions FMU3 Floor Mixing Unit with Grundfos UPM3 Pump
Installation and Commissioning Instructions FMU3 Floor Mixing Unit with Grundfos UPM3 Pump Reduced Installation time Precision regulation Minimal tooling required 100% tested prior to packaging High quality
More informationAll Valve Industries. General Product Overview. Distributed by All Valve Industries. Ph: Fax:
All Valve Industries General Product Overview Distributed by All Valve Industries Ph: +61 2 8543 5111 Fax: +61 2 8543 5122 www.allvalve.com.au Manufacturer Introduction All Valve Industries has aligned
More informationHW 22 District heating substation for indirect heating and domestic hot water systems
HW 22 District heating substation for indirect heating and domestic hot water systems HW 22 Table of contents HW 22... 1 Table of contents... 1 Safety notes... 2 Delivery... 2 Transport and storage...
More informationGOLD Plus 30/40/60/80
PLUS Line Indirect-Fired Water Heaters Series 3 Manual Installation Startup Maintenance Parts PLUS 100/110/119 GOLD Plus 30/40/60/80 Plus 40/60/80 This manual must only be used by a qualified heating installer/service
More informationCALEFFI. SATK wall-mounted heat interface unit Fitted for connection to DHW storage. SATK40 series 01216/14 GB
4 RESET ON DHW CH FAULT SATK wall-mounted heat interface unit Fitted for connection to DHW storage SATK4 series ACCREDITED CALEFFI 6/4 GB ISO 9 FM 64 ISO 9 No. The latest generation of heat interface units
More informationFLO-RITE-TEMP INSTANTANEOUS WATER HEATER INSTALLATION AND ADJUSTMENT INSTRUCTIONS FOR SINGLE AND DOUBLE WALL UNITS
FLO-RITE-TEMP INSTANTANEOUS WATER HEATER INSTALLATION AND ADJUSTMENT INSTRUCTIONS FOR SINGLE AND DOUBLE WALL UNITS Bulletin No. AY-780-L This bulletin should be used by experienced personnel as a guide
More informationCALEFFI. dirt separator series 01137/16 NA. Replaces 01137/15 NA. Product range. Technical specifications
dirt separator 56 56 565 series REIE ISO 900 M 65 ISO 900 No. 000 LEI 07/6 N Replaces 07/5 N unction In heating and air conditioning control systems, the circulation of water containing impurities may
More informationINSTRUCTIONS REHAU PRO-BALANCE MIXING MODULE
INSTRUCTIONS REHAU PRO-BALANCE MIXING MODULE SPECIFICATIONS... 1 OVERVIEW... 2 PRECAUTIONS... 2 MOUNTING LOCATION... 2 CONNECTION TO BOILER PRIMARY PIPING:... 3 ELECTRICAL CONNECTION... 4 FLUSHING THE
More informationHydronic Mechanical Panels
Hydronic Assemblies Inc. 56 Horse Hill Rd Concord NH 2015-2016 Hydronic Mechanical Panels Contact 4805 Main St. Waitsfield, Vermont 05673 Phone : 802-583-5500 WWW.Houseneeds.com Hydronic Assemblies Inc.
More informationVarsity Exposed Shower Systems
VARSITY EXPOSED SHOWER SYSTEM Installation & aftercare instructions Please retain for future reference Varsity Dual Function Exposed Shower System Product code SVA1712 Varsity Single Function Exposed Shower
More informationHome. One Source For All Your Potable Water Needs
Home One Source For All Your Potable Water Needs AMX300 Thermostatic Mixing Valve Kit Installation that s literally almost no sweat. Kit includes mixing valve, cold water tee, flexible 8" or 11" metal
More informationPROVIDES TEPID WATER FOR EMERGENCY SHOWER
PROVIDES TEPID WATER FOR EMERGENCY SHOWER Model EMV FEATURES Heavy Duty Construction Hydrastone cement lining provides tank longevity Copper-silicon alloy tappings cannot rust or corrode High impact composite
More informationTepid Water Delivery System
Provides Tepid Water For Emergency Fixtures Features Heavy Duty Construction Hydrastone cement lining provides tank longevity Copper-silicon alloy tappings cannot rust or corrode High impact composite
More informationRadiator Valve Program
Radiator Valve Program Heat seeks cold faster when the temperature difference is greater. Lowering the temperature of a room reduces the amount of heat leaving the room (heat loss). Installing thermostats
More informationCaleffi Hydronic Solutions Contact: Rex Gillespie, Director of Marketing Phone: (414)
Caleffi North America, Inc. 3883 W. Milwaukee Road Milwaukee, WI 53208 T: 414.238.2360 F: 414.238.2366 LITERATURE RELEASE Caleffi Hydronic Solutions June 10, 2010 Contact: Rex Gillespie, Director of Marketing
More informationWATER CONTROL VALVES
CASH ACME CATALOG WATER CONTROL VALVES THAT STAND THE TEST OF TIME In 1893, A.W. Cash designed a valve for U.S. Navy submarines. With the bottom of the sea as his testing ground, the valve became celebrated
More informationINSTALLTION FOR THERMOSTATIC VALVES
SS-TH1000 ½ THERMOSTATIC VALVE SS-TH3000 ¾ THERMOSTATIC VALVE SS-TH2000 ½ THERMOSTATIC VALVE WITH BUILT IN VOLUME CONTROL SS-TH4000 ¾ THERMOSTATIC VALVE WITH BUILT IN VOLUME CONTROL Features: Ability to
More informationLP30 High Integrity Low Level Alarm Probe Installation and Maintenance Instructions
4024750/9 IM-P402-44 AB Issue 9 LP30 High Integrity Low Level Alarm Probe Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4 Wiring 5
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS MODEL: BISTRO THERMO SHOWER KIT (RH-5344) 1 Restoration Hardware Thermo Shower Kit Specification Diagram 2 All Threaded Connections are 3/4 NPT Dimensions are in Inches and Approximation
More information2016 CASH ACME CATALOG
2016 CASH ACME CATALOG WATER CONTROL VALVES THAT STAND THE TEST OF TIME In 1893, A.W. Cash designed a valve for U.S. Navy submarines. With the bottom of the sea as his testing ground, the valve became
More information