HOW TO INCREASE YIELD AND IMPROVE PROPERTY VALUES? WITH ADEQUATE SOIL DECOMPACTION!
What is soi compaction? Soi compaction basicay consist of earth in which its density is too high. In other words, the soi acks aeration. A B C Layers of compacted soi : Arabe top soi (idea composition) A Compaction zone (arger aggregates) Subsoi B C Soi compaction is a major factor in ow yieds. Compacted soi : u restricts root deveopment and nutrient absorption; u significanty sows rainwater drainage, resuting in surface water accumuation which can cut crop yieds; u during a dry spe, prevents humidity from rising to the root system; u degrades soi structure. There are a number of ways to prevent soi compaction : work your soi in dry conditions, reduce axe weights, use arger tires, radia tires etc. However, when a fied is aready compacted, ony one method is avaiabe to correct the probem rapidy : a subsoier.
Our subsoiers can hep you! Our subsoiers, the MAX Subsoier and the MFC, are attached to the 3-point hitch and very maneuverabe. They have a non-stop cabin controed hydrauic reset system. Their shanks are in W formation to eiminate soi accumuation. We have the subsoier to suit your needs : u remove surface compaction with the chise fitted MFC, with a working depth of 6 to 14 inches; u breakup the pough-pan with the subsoier (minimum ti or standard) fitted MFC, with a working depth of 10 to 20 inches; u breakup deep compaction with our the MAX Subsoier which works at a depth of 16 to 28 inches. Furthermore, the MFC can be setup for zone tiing, working at a depth of 4 to 20 inches. Zone tiing works in a vertica path which favors deep root deveopment (as opposed to wide root deveopment) but does not decompact the soi.
The MAX Subsoier 3 4 1 2 1 Doube dua-beam construction frame 2 Gauge whee 11L15 12 pi 3 Hydrauic pressure gauge 4 Oi accumuator for the non-stop hydrauic reset system Features of the MAX Subsoier Working depth : 16 to 28 inches Cearance under shank support : 36 inches Maximum strength : from 4500 to 7500 bs Distance between shanks : 30 inches View from the tractor 2 Advantages of the hydrauic reset system u Adjustabe working pressure from the cabin, aows using minimum pressure necessary to eave rocks in the soi u Automatic reset u Singe action cyinders buit simiar to doube action cyinder for onger durabiity u Better shock absorption Triggered shank
3 2 4 The MFC 1 1 Tripe beam construction frame 2 Gauge whee 11L15 12 pi 3 Hydrauic pressure gauge 4 Oi accumuator for the non-stop hydrauic reset 2 MFC setup in combination standard subsoier/ chise with optiona defectors Features of the MFC Working depth : 10 to 20 inches Cearance under shank support : 28 inches Maximum strength (subsoier) : from 3000 to 5000 bs Distance between shanks : 30 inches Maximum strength (chise) : from 1600 to 2700 bs * Couters (optiona) MFC possibe configurations Minimum ti subsoier * Standard Subsoier *+ Standard subsoier/chise combination + Shaow zone ti * Deep zone ti * + Defectors (optiona) Minimum ti subsoier with couters
The MAX Subsoier and the MFC Setup Working depth (inches) SHANK POINT The MAX Subsoier Heavy duty subsoier 16 to 28 Thickness 1 1/2 6 wide, curved 5 1/2 wide 19 ong, reversibe Minimum ti subsoier 10 to 20 Standard subsoier 10 to 20 Thickness 1 1/4 5 wide straight protector Thickness 1 1/4 5 wide, curved Protector Defector optiona 2 wide 11 ong Wings 5 or 7 5 wide 13 ong, reversibe The MFC Standard subsoier with chise Subsoier : 10 to 20 Chise : 6 to 10 3 wide, curved Defector optiona Thickness 1/2 6 wide 8 ong, reversibe Shaow zone-ti 4 to 10 Thickness 3/4 4 wide straight 2 wide 10 1/2 ong Aieron Deep zone-ti 10 to 20 Thickness 1 1/4 5 wide straight protector 2 wide 11 ong
technica data Nomber of shank Power required (HP) Tota weight (pounds) Working width (feet) Transport width (feet) 3 150 to 225 3000 7 1/2 9 5 250 to 375 4700 12 1/2 14 7 350 to 525 6900 17 1/2 18 3 90 to 150 2100 7 1/2 9 4 120 to 200 2500 10 11 1/2 5 150 to 250 3300 12 1/2 14 6 180 to 300 3700 15 16 1/2 3 90 to 150 2100 7 1/2 9 4 120 to 200 2500 10 11 1/2 5 150 to 250 3300 12 1/2 14 6 180 to 300 3700 15 16 1/2 3 + 4 chise 130 to 230 2700 8 3/4 9 4 + 5 chise 170 to 300 3300 11 1/4 11 1/2 5 + 6 chise 210 to 370 4200 13 3/4 14 6 + 7 chise 250 to 440 4800 16 1/4 16 1/2 3 60 to 105 1800 7 1/2 9 4 80 to 140 2100 10 11 1/2 5 100 to 175 2700 12 1/2 14 6 120 to 210 3000 15 16 1/2 3 75 to 120 2100 7 1/2 9 4 100 to 160 2500 10 11 1/2 5 125 to 200 3300 12 1/2 14 6 150 to 240 3700 15 16 1/2 Notes No gauge whee Couters (optiona, 100 b / unit), hep to reduce disturbance at the surface Couters (optiona) + Defectors (optiona) + Defectors (optiona) Height adjustabe chise shanks Couters (optiona) Couters (optiona)
La Soe Inc. : Who are we? We are a proud famiy enterprise, in business since 1994 in the design, manufacturing and sae of agricutura machinery. Our initia product, the Doube Bade, is a revoutionary method of and eveing and seedbed preparation. Since then we have expanding our product range with the Super Bade and our two subsoier modes, the MFC and the MAX Subsoier. Our business objective is to suppy our customers with soi management machinery which not ony innovative but of the highest quaity, which can ony increase crop yied. You dea directy with the manufacturer, getting the best advice on which machine to buy and how to use it efficienty. We can even modify the product to answer your specific needs. Ca us, it wi be a peasure to answer any questions you may have. Innovations inspired by experience La Soe Inc. 290 1st Ave, Ste-Héène (Quebec) Canada J0H 1M0 To free 877.772.5233 T 450.791.4007 F 450.791.2384 Mai info@asoe.ca Web site www.asoe.ca