Declaration of conformity - Safety relays 14:2. Declaration of conformity - JSBR4 14:3. Declaration of conformity - Vital 1 14:4

Similar documents
Original instructions INCA-1 Emergency stop for enclosure installation INCA-1S Safety stop for enclosure installation

Original instructions JSNY7 Magnetic switch

Safety Sensor Eden AS-i Machine safety - Jokab Safety products

Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013

AGC-4, GPC-3, GPU- 3 and GPC 2g with the option Al

EU Declaration of Conformity EMC Directive 2014/30/EU, ATEX Directive 2014/34/EU, PED Directive 2014/68/EU No: MMI SE

Safety. Detection. Control. SAFETY INTERFACES. Safety Interfaces and Relays. Product catalogue. Issue 1

IECEx Certificate of Conformity

RADAR REFLECTOR STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:

including the locations according to annex

MARKING EC Directive 97/23 PED (Pressure Equipment Directive)

EC-TYPE EXAMINATION CERTIFICATE (MODULE B)

Manual Power relay SR853

CERTIFICATE. Conformity of the Factory Production Control CPR TÜVRh

DDS-SSENSOR - INSTALLATION MANUAL. Installation Manual DDS-S SENSOR

Original instructions Sense7-series Non-contact coded safety switch

Chain saws (electric mains powered and battery powered)

CERTIFICATE of Product Conformity (QAL1)

LOVAG TEST INSTRUCTION IEC/EN

CERTIFICATE. about Product Conformity {QAL 1) Number of Certificate: _02

CERTIFICATE. EN tested QAL 1 certified TUV approved Annual inspection. The certificate is valid until: 19July2017. Köln, 17 August2012

CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE

MARINE GYRO COMPASS STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Lawnmowers, pedestrian controlled (combustion engine powered)

SAFETY INTERFACES SAFETY INTERFACES AND RELAYS

T.Y.C. BROTHER IND. CO., LTD.

Notified Body No.: 0098

Certificate: _01 / 22 March 2013

CEN standardization work on refrigerating systems, especially standard EN 378

CERTIFICATE. EN tested QAL 1 certified TUV approved Annual inspection. The certificate is valid until: 28 July 2016

CERTIFICATE. on Product Conformity (QAL 1) Number of Certificate: _02

LZR -I30. max. detection range of 30 ft x 30 ft LASER SCANNERS FOR INDUSTRIAL DOORS LZR-I Page 1 of 12

CE marking & your legal obligations

DDS-A / DDS-B HYBRID SENSOR

Brush cutters Grass Trimmers (combustion engine powered)

LZR -I100/ -I110. LASER SCANNERS for industrial doors. User s Guide for product version 0600 and more

Tail-end valve stations

CERTIFICATE. on Product Conformity (QAL 1) Number of Certificate: ENDA-5000 with analysing module CMA-5800 for NOx. S0 2, CO, co2 and 02

This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation

Achieve Success with European Medical Device Commercialization. By Russ King

Test reports for the determination of B 10d values for emergency stop switches of families 800F, 800H, 800T and D7 of Rockwell Automation

EN Electrical Equipment of non-electric appliances for household and similiar purposes Safety requirements

CE MARKING PROCESS & NOTIFIED BODIES

SmartPower Solutions [ SmartPower Solutions. Quick Installation Guide , Rev AC January 2012

CERTIFICATE of Product Conformity (QAL1 )

CERTIFICATE of Product Conformity (QAL1 )

Declaration of conformity maintenance record. No Revised date Contents Reasons Approval

Lawn trimmers and lawn edge trimmers (hand held electric mains powered)

EC TYPE EXAMINATION (Module B) CERTIFICATE MARINE EQUIPMENT DIRECTIVE Certificate No.: 0832-MED-1019

EU Declaration of Conformity

Certificate: _01 / 22 March 2013

Regulated Ex-Heater HEX with internal controller, HEX with external controller II 3 G II 3 D

OMRON SCIENTIFIC TECHNOLOGIES INCORPORATED ECDeclaration ofconformity

CERTIFICATE of Product Conformity (QAL1 )

DECLARATION OF PERFORMANCE. No EN. Annexes B 1 to B 4

AUGUST 2016 CONTENTS:

TEMPORARY IMMERSION AND DUST TEST REPORT

Supplementary Installation and Operating Instructions. Category II2G

Certificate: _01 / 19 August 2011

XGUARD-10/-5. LASER SCANNERS for industrial doors. User s Guide for product version 0600 and more

GMA200-MW16. Operation Manual. Gas detection controller for wall mounting

OPTIBAR DP 7060 Supplementary Instructions

Sensing light curtain as per DIN 18650/EN 16005

EC DECLARATION OF CONFORMITY

EU DECLARATION OF CONFORMITY. 3. This declaration of conformity is issued under the sole responsibility of the manufacturer.

Operating instructions Safety-monitoring module SRB 302X3. 1 About this document

C e r t i f i c a t e

Automation, Functional Safety. Assessment of the Point Guard Analog Input Safety Modules 1734-IE4S and 1734-IE4SXT Rockwell Automation, USA

CERTIFICATE of Product Conformity (QAL1 )

Automation, Software und Informationstechnologie

Operating Instructions for Limit switch Model: NBK-R NBK-RM NBK-RT NBK-RA

TEMPORARY IMMERSION AND DUST TEST REPORT

CERTIFICATE of Product Conformity (QAL1 )

Operating instructions Safety-monitoring module SRB 302X3. 1. About this document. Content

GSO Certification. The key to successful home appliance sales in the Gulf region.

OPERATING MANUAL CDP 115 Peltier cooling unit for waterbaths

Safety Service MACHINE. Risk evaluation Safety level evaluation. News about directives. Periodical device inspection. Control of electric parts

Materials Handling and Intralogistics. Industrial Trucks. In accordance with the Directive Equipment for potentially explosive atmospheres (ATEX)

Do you manufacture equipment or protective systems for use in potentially explosive atmospheres? Do you process, trade or import them?

Alarm Switchgear AS1-M

The European Radio Equipment Directive 2014/53/EU

Lawnmowers (pedestrian controlled electric mains-powered)

S L S E Mistrall ** VG * L 58-60

Extended Coverage Sidewall Sprinklers

Notified Body No.: 0575 G U A D N L. SJq

P R O D U C T D ATA S H E E T

GMA200-MT. Operation Manual. Gas detection controller for mounting rail assembly

Manual Isolating Barrier D461R1 (Revision 01)

IECEx Certificate of Conformity

DECLARATION OF COMPLIANCE PERFORMANCE AND CE MARK

Certification of the conformity of QSCDs for server-signing with the requirements laid down in Annex II of Regulation (EU) No.

Certificate: / 9 February 2011

The Machinery Directive 2006/42/EC

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

P R O D U C T D ATA S H E E T

TOV 00 A TEX E.L.B. Fullstandsgerate Bundschuh GmbH & Co. KG. An der Hartbrucke Bensheim Germany

Lawnmowers (pedestrian controlled, battery powered)

Manual Isolating Barrier D461 (Revision 05)

Sensing light curtain as per DIN 18650/EN 16005

Transcription:

Contents Page Declaration of conformity - Safety relays 14:2 Declaration of conformity - JSBR4 14:3 Declaration of conformity - Vital 1 14:4 Declaration of conformity - Eden, Tina, FMC-Tina and Magne 14:5 Declaration of conformity - Smile, INCA1, Stop Line and JSNY10 14:6 Declaration of conformity - Knox 14:7 Declaration of conformity - Pluto 14:8 Descriptions and examples in this book show how the products work and can be used. This does not mean that they can meet the requirements for all types of machines and processes. The purchaser/user is responsible for ensuring that the product is installed and used in accordance with the applicable regulations and standards. reserve the right to make changes in products and product sheets without previous notice. For the latest updates, refer to. 2011. 14:1

Declaration of conformity - Safety relays Person authorised to compile the technical file (according to, Annex 2A) declare that the safety components of make with type designations and safety functions as listed below, is in conformity with the Directives Product EC type-examination certificate Serialnumber Safety relay for general use JSBT4 44 205 09 372091-002 [000 000... 999-999] BT50(T), BT51(T) 44 205 09 372091-003 [000 000... 999-999] JSBT5(T) 44 205 09 372091-006 [000 000... 999-999] JSBRT11 44 205 09 372091-010 [000 000... 999-999] RT9 44 205 09 372091-011 [000 000... 999-999] RT6 44 205 09 372091-012 [000 000... 999-999] RT7 44 205 09 372091-013 [000 000... 999-999] JSBR3 44 205 09 372091-014 [000 000... 999-999] JSBT3 44 205 09 372091-015 [000 000... 999-999] Expansion relays E1T 44 205 09 372091-005 [000 000... 999-999] JSR1T 44 205 09 372091-007 [000 000... 999-999] JSR2A 44 205 09 372091-008 [000 000... 999-999] JSR3T 44 205 09 372091-009 [000 000... 999-999] Safety timer-relay JSHT1A/B, JSHT2A/B/C 44 205 09 372091-004 [000 000... 999-999] EC type-examination TÜV NORD CERT GmbH Langemarckstrasse 20, 45141 Essen Germany Notified body No. 0044 EN ISO 12100-1:2003+A1:2009, EN ISO 12100-2:2003+A1:2009, EN 954-1:1996/EN ISO 13849-1:2008, EN 62061:2005, EN 60204-1:2006+A1:2009, EN 60664-1:2007, EN 61000-6-1:2007, EN 61000-6-3:2007, EN 60947-5-1:2003+A1:2009 Kungsbacka 2010-11-26 14:2

Declaration of conformity - JSBR4 1 2 (according to, Annex 2A) declare that the safety components of make with type designations and safety functions as listed below, are in conformity with the Directives 3 Person authorised to compile the technical file Product EC type-examination certificate Serialnumber Safety relay for two-hand applications and other safety devices JSBR4 44 205 09 372091-001 [000 000... 999-999] 4 5 EC Type-Examination TÜV NORD CERT GmbH Langemarckstrasse 20, 45141 Essen Germany Notified body No. 0044 6 Kungsbacka 2010-11-26 EN ISO 12100-1:2003+A1:2009, EN ISO 12100-2:2003+A1:2009, EN 574:1996+A1:2008 Type IIIc, EN 954-1:1996/EN ISO 13849-1:2008, EN 62061:2005, EN 60204-1:2006+A1:2009, EN 60664-1:2007, EN 61000-6-1:2007, EN 61000-6-3:2007, EN 60947-5-1:2003+A1:2009 7 8 9 10 11 12 13 14:3 14

Declaration of conformity- Vital 1 (according to, Annex2A) declare that the safety components of ABB make with type designations and safety functions as listed below, is in conformity with the Directives Person authorised to compile the technical file Product EC type-examination certificate Serialnumber Safety module Vital1 44 205 09 372092-001 [000 000... 999-999] EC type-examination TÜV NORD CERT GmbH Langemarckstrasse 20 45141 Essen Germany Notified body No. 0044 EN ISO 12100-1:2003+A1:2009, EN ISO 12100-2:2003+A1:2009, EN 954-1:1996/EN ISO 13849-1:2008, EN 62061:2005, EN 60204-1:2006+A1:2009, IEC 60664-1:2007, EN 61000-6-2:2005, EN 61000-6-4:2007 Kungsbacka 2010-11-26 14:4

Declaration of conformity - Eden, Tina, FMC-Tina and Magne JOKAB SAFETY Person authorised to compile the technical file (according to, Annex 2A) declare that the safety components of make with type designations and safety functions as listed below, is in conformity with the Directives JOKAB SAFETY Product Certificate Serialnumber Non-contact safety sensor 44 207 10 372092-001 [000 000... 999-999] Eden (Adam, Eva) E/C/EC Adapter unit 44 207 10 372092-001 [000 000... 999-999] Tina 1-8, Tina 10-12 Muting unit 44 207 10 372092-001 [000 000... 999-999] FMC-Tina Non-contact safety sensor including locking function Magne 2A, 2B, 2AX, 2BX 44 207 10 372092-001 [000 000... 999-999] Notified body Kungsbacka 2011-03-02 TÜV NORD CERT GmbH Langemarckstrasse 20 45141 Essen Germany Notified body No. 0044 EN ISO 12100-1:2003+A1:2009, EN ISO 12100-2:2003+A1:2009, EN 954-1:1996/EN ISO 13849-1:2008, EN 62061:2005, EN 60204-1:2006+A1:2009, EN 60664-1:2007, EN 61000-6-2:2005, EN 61000-6-4:2007, EN 60947-5-1:2004, EN 1088+A2:2008 1 2 3 4 5 6 7 8 9 10 11 12 13 14:5 14

Declaration of conformity - Smile, INCA1, Stop Line and JSNY10 JOKAB SAFETY Varlabergsgatan 11 (according to, Annex2A) declare that the safety components of make with type designations and safety functions as listed below, is in conformity with the Directives Person authorised to compile the technical file Product Emergency stop device Smile, versions 10EA, 10EAK, 11EA, 12EA, 11EAR Emergency stop device INCA 1 Emergency stop wire Stop Line Emergency stop wire JSNY10 Notified Body Varlabergsgatan 11 Certificate 11-SKM-CM-0103 11-SKM-CM-0103 Inspecta AB Box 30100 SE-104 25 Stockholm Notified Body No. 0409 EN ISO 12100:2010, EN 954-1:1996, EN ISO 13849-1:2008/AC:2009, EN 60204-1:2007+A1, EN ISO 13850:2008 Kungsbacka 2011-03-04 14:6

Declaration of conformity- Knox (according to, Annex 2A) 1 2 Varlabergsgatan 11 Person authorised to compile the technical file Product Non-contact safety sensor including locking function Knox Notified body Kungsbacka 2010-11-26 declare that the safety components of manufacture with type designations and safety functions as listed below, is in conformity with the Directives Varlabergsgatan 11 Certificate 815 933 INTERTEK SEMKO AB Box 1103 SE-164 22 KISTA Notified body no 0413 EN ISO 12100-1:2003+A1:2009, EN ISO 12100-2:2003+A1:2009, EN 954-1:1996/EN ISO 13849-1:2008, EN 1088+A2:2008, EN 60204-1:2006+A1:2009, EN 61000-6-2:2005, EN 61000-6-4:2007 3 4 5 6 7 8 9 10 11 12 13 14:7 14

Declaration of conformity - Pluto Person authorised to compile the technical file EC declaration of conformity (according to, Annex 2A) declare that the safety components of ABB manufacture, with type designations and safety functions as listed below, are in conformity with the Directives Göran Svensson Jokab Safety Kanalvägen 17 SE-183 30 Täby Programmable electronic safety system (Safety PLC system) Pluto version A20, B20, B16, S19, S20, B46, S46, AS-i, B42 AS-i Used harmonized standards EN ISO 13849-1:2006/EN 954-1 EN ISO 13849-1:2008 EN 62061 EN 61496-1 EN 574 EN 692 EN 60204-1 EN 50178 EN 61000-6-2 EN 61000-6-4 EN 61000-4-1 6 (Directive ) (Directive ) (Directive ) (Directive ) (Directive ) (Directive ) (Directive ) (Directive ) (Directive ) (Directive ) (Directive ) Other used standards and documents EC Type-Examination IEC/EN 61508 DIN V VDE 0801:1990 with amendment A1:1994 TÜV-Rheinland Am Grauen Stein D-51105 Köln Germany Notified body No. 0035 Certificate no 01/205/5066/10 Kungsbacka 2011-01-01 14:8

Notes 14:9

Notes 14:10

Notes 14:11