LOVAG TEST INSTRUCTION IEC/EN
|
|
- Kory Eaton
- 5 years ago
- Views:
Transcription
1 LOVAG TEST INSTRUCTION IEC/EN CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS- ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION This test instruction is based on the following standards: General rules: Standard: IEC :2004, Edition 4.0 EN : 2004 Specific requirements: Standard IEC :2003; Edition 3.0 EN : 2004 Standard IEC : 2005, Edition 1.1 EN : 2005 Valid from: 17 th April 2012 signed by Dr. Saverio Manganaro Chairman of LOVAG Technical Committee Page 1 of 8 Author: Intertek Semko AB
2 The test instruction consists of pages dated as shown in the following list: Pages Date 1 to 8 07 th March 2011 Page 2 of 8
3 PREAMBLE The tests shall be carried out after the reference standard(s) have been studied, since this test instruction only provides on certain points. For convenience in the use of this instruction, the paragraphs are numbered according to the clauses in the standard IEC Page 3 of 8
4 5 Electrical requirements The following test information shall be stated by the manufacturer prior to the specific tests of IEC being carried out: - Verification of the utilization categories AC-15 and/or DC-15 and/or DC-14 in accordance with IEC Verification of positive opening action (direct opening action), in accordance with annex K of IEC If degree of protection is stated, tests in accordance with annex C of IEC General All tests in accordance with 7.3.3, 7.4, 7,6 and 7.7 are carried out on three identical samples, each sample shall be subjected to the sequence of tests in the order given above. If resetting by key, the samples shall be tested without the key inserted. Previously to the test sequence, samples are fitted with cables Acc. to IEC Cables shall not be removed during the whole sequence. 7.2 General design inspection Verification by inspection of the mechanical structure of the emergency stop device is called for in this clause and shall be recorded in the test report Robustness of a button actuator The test may be carried out on a separate sample. The torque shall be applied in both directions of rotation and shall also include turning by a key if resetting is by key operation. The actuator shall be in the rest position during the test. Page 4 of 8
5 Force is applied in the three mutually perpendicular axes, see fig down Durability test Three samples are subjected to the tests which may be carried out in conjunction with the electrical tests if not carried out previously (See clause 5) 7.4 Conditioning procedures The test is carried out on the same three samples tested according to clause above. Each sample shall be mounted in its own enclosure or if none supplied, all parts except the actuator should be protected equal to at least IP 65 The test can be carried out with all the samples in one chamber or different chambers. The changing of moistures and warm atmosphere period shall be 12 hours with a total test time of at least 96hours (Four complete cycles 12 hours + 12 hours), see diagram below. Variant 2 of IEC are admissible. In case of reset by key, it shall remain fitted. Records of cycles to be joined in the TRF. Page 5 of 8
6 7.5 Shock test After the salt mist test, the samples tested shall be washed in running tap water for 5 min (IEC ), at a water temperature of +35 C. Dry and restore the device to room temperature. The test is carried out on the same three samples tested to and 7.4. Oscillographic or similar means shall be used to detect any opening or closing of contacts longer than 0,2 ms. Voltage and current of the measurement circuit shall be the minimum as declared by the manufacturer. Shock is applied in both directions of the corresponding axis, see fig down. Page 6 of 8
7 7.6 Vibration tests. The test is carried out on the same three samples tested according to 7.3.3, 7.4 and 7.5. One sample for each of the three mutual perpendicular axes, see figure below. Oscillographic or similar means shall be used to detect any opening or closing of the contacts longer than 0,2 ms. Voltage and current of the measurement circuit shall be the minimum as declared by the manufacturer. X axis: sample 1, Y axis: sample 2, Z axis: sample Latching, resetting and impact tests The test is carried out on the same three samples tested according to 7.3.2, 7.4, 7.5 and Opening test. The actuator of the device shall be moved by hand just to the point where latching occurs. After latching, to verify that the normally closed contact is opened an impulse voltage test at 2500V ( In accordance with IEC ) shall be conducted Latching test - Hammer test. The emergency stop device and its actuator are mounted in front of the hammer as shown in figure 1. After the strike the latching shall be verified and the normally closed contacts are open and an impulse voltage test of shall be carried out. Page 7 of 8
8 7.7.4 Resetting test If the device has key operated resetting, the test shall be done by turning the key This test may be carried out on a separate sample with the same arrangement as the test in but with the strike of the hammer in a higher level (310 mm). If there is doubt about latching and opening of the contacts the impulse voltage test in shall be repeated. After the three strikes a visual inspection, and test of the latching function shall be made. No damage of the actuator is accepted. 7.8 Miscellaneous tests Disengagement of wire or rope ( Trip wire switches ). The actuator with wire or rope is installed according to the manufacturer s instruction. After disengagement if there is doubt about the opening of the contacts the impulse voltage test at 2500V of shall be carried out. Page 8 of 8
Circuit Breakers JANUARY The electronic pdf version of this document found through is the officially binding version
STANDARD FOR CERTIFICATION No. 2.9 Approval Programmes Type Approval Programmes for EU recognised organisation Mutual Recognition (MR) No. MR-E001 Circuit Breakers JANUARY 2013 The electronic pdf version
More informationProduct Specification EMI Shielded Duplex LC Sealed Receptacle (ODVA Conforming)
Product Specification EMI Shielded Duplex LC Sealed Receptacle (ODVA Conforming) 02Oct08 Rev A 1. SCOPE 1.1. Content This specification, based on IEC 61753-1 Edition 1.0 tests for Category E (Extreme Environment),
More informationOverload relays. General descriptions. Configuration of the front
Overload relays General descriptions Type MT, bimetal-style, overload relays are designed to protect AC circuits and motors against overloads, phase failure, long starting times and prolonged stalling
More informationProduct Tests Report
TO WHOM IT MAY CONCERN Page: 1 of 5 Product name: Model number and description: MIC IP starlight 7000i Product Tests Report MIC-7502-Z30B, PTZ camera 2MP HDR 30x IP68 IK10, black MIC-7502-Z30W, PTZ camera
More informationHMN-D2 Insert Series
HMN-D2 Insert Series Table of contents 1. SCOPE... 2 1.1. Content... 2 1.2. Qualification... 2 2. APPLICABLE DOCUMENTS... 2 2.1. TE Connectivity Documents... 2 2.2. Other Documents... 2 3. REQUIREMENTS...
More informationOperating instructions Safety-monitoring module SRB 302X3. 1 About this document
1 About this document Operating instructions... pages 1 to 6 Translation of the original operating instructions 1.1 Function This operating instructions manual provides all the information you need for
More informationOperating instructions Safety-monitoring module SRB 302X3. 1. About this document. Content
8 Appendix 8.1 Wiring examples...4 8.2 Start configuration...4 8.3 Sensor configuration...4 8.4 Actuator configuration...5 Operating instructions.............pages 1 to 6 Original 9 EU Declaration of conformity
More informationLatch key safety limit switches Technical data
Latch key safety Safety General Data Standards IE 6047-1, IE 6047-5-1, EN 6047-1, EN 6047-5-1, UL 508, and SA 22-2 No. 14 ertifications - Approvals UL and SA Air temperature near the device during operation
More informationZHEJIANG MAXGE ELECTRIC TECHNOLOGY CO., LTD. Address...:
Test Report issued under the responsibility of: TEST REORT IEC 61008-1 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) art 1: General
More informationDatasheet - AZM ZRK 24 VAC/DC
Print - Create PDF - Create EXCEL file - Hide system components 21.04.2011-10:13:56h Datasheet - AZM 170-02ZRK 24 VAC/DC Solenoid interlock / AZM 170 thermoplastic enclosure Double-insulated Compact design
More informationDatasheet - AZM ZRK 24 VAC/DC Solenoid interlock / AZM 170
http://www.schmersal.net/datenblatt?lang=en&produkt=ax4732937owob0f8o2640384... 29/09/2011 Datasheet - AZM 170-11ZRK 24 VAC/DC Solenoid interlock / AZM 170 Preferred typ thermoplastic enclosure Double-insulated
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32798-9 SOUTH AFRICAN NATIONAL STANDARD Gas measuring equipment primarily for use in mines Part 5: Fire detectors WARNING This standard references other documents normatively. Published
More informationCOMITÉ EUROPÉEN DES ASSURANCES
COMITÉ EUROPÉEN DES ASSURANCES SECRETARIAT GENERAL 3bis, rue de la Chaussée d'antin F 75009 Paris Tél. : +33 1 44 83 11 73 Fax : +33 1 44 83 11 85 Web : cea.assur.org DELEGATION A BRUXELLES Square de Meeûs,
More informationDatasheet - MZM 100 ST2-1P2PWREM-A
30.05.2015-14:45:08h Datasheet - MZM 100 ST2-1P2PWREM-A Solenoid interlock / MZM 100 Preferred typ Guard locking monitored Automatic latching Solenoid interlocks (for the protection of man) with innovating
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30910-7 SOUTH AFRICAN NATIONAL STANDARD Electrical security systems Part 2-2: Access control systems Central processor WARNING This document references other documents normatively. Published
More informationDatasheet - MZM 100 ST-SD2PREM-A
19.03.2014-10:31:42h Datasheet - MZM 100 ST-SD2PREM-A Solenoid interlock / MZM 100 Preferred typ Guard locking monitored Automatic latching Solenoid interlocks (for the protection of man) with innovating
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25781-1 IEC 61010-1:2010 SOUTH AFRICAN NATIONAL STANDARD Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements This national
More informationDatasheet - AZM 161SK-12/12RK-024
Print - Create PDF - Create EXCEL file - Hide system components 21.04.2011-14:21:41h Datasheet - AZM 161SK-12/12RK-024 Solenoid interlock / AZM 161 thermoplastic enclosure Double-insulated Interlock with
More informationDatasheet - MZM 100 B ST2-SD2PREM-A
30.05.2015-14:46:12h Datasheet - MZM 100 B ST2-SD2PREM-A Solenoid interlock / MZM 100 Preferred typ Actuator monitored Automatic latching Solenoid interlocks (for the protection of man) with innovating
More informationResidual Current Devices
Residual devices F200 Series UL 1053 Residual devices F200 Series Residual Current Devices Description The F200 Series residual devices offer a wide range of product for all of your fault protection needs.
More informationOperating Guide Safe Torque Off
ENGINEERING TOMORROW Operating Guide Safe Torque Off VLT Frequency Converters vlt-drives.danfoss.com Contents Operating Guide Contents 1 Introduction 2 1.1 Purpose of the Manual 2 1.2 Additional Resources
More informationGM420. Digital Ground Continuity Relay For AC Systems. Technical Bulletin NAE /
3 GM20 Digital Ground Continuity Relay For AC Systems Technical Bulletin NAE03230 / 0.20 GM20 Ground continuity monitor For AC systems Description The GM20 monitors the loop resistance of ground conductors
More informationAustralian Standard. Degrees of protection provided by enclosures (IP Code) AS IEC Ed 2.1:2001 AS 60529
AS 60529 2004 IEC 60529 Ed 2.1:2001 AS 60529 Australian Standard Degrees of protection provided by enclosures (IP Code) This Australian Standard was prepared by Committee EL-026, Protective Enclosures
More informationLow-voltage switchgear and controlgear - rated voltage does not exceed 1000V AC or 1500V DC
CLASS PROGRAMME Type approval DNVGL-CP-0396 Edition December 2015 Low-voltage switchgear and controlgear - rated voltage does not exceed 1000V AC or 1500V DC The electronic pdf version of this document,
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61514-2 First edition 2004-01 Industrial process control systems Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs IEC 2004
More informationPQS Independent type-testing protocol
PQS Independent type-testing protocol WHO/XXX Original: English Distribution: General TITLE: Integrated electronic maximum-minimum thermometer, with factory programmed alarms, for vaccine refrigerators
More informationSTANDARDS UPDATE NOTICE (SUN) ISSUED: March 19, 2018
STANDARDS UPDATE NOTICE (SUN) ISSUED: March 19, 2018 STANDARD INFORMATION Standard Number: UL 325 Standard Name: Standard for Door, Drapery, Gate, Louver, and Window Operators and Systems Standard Edition
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28897-6 IEC 61869-1:2007 SOUTH AFRICAN NATIONAL STANDARD Instrument transformers Part 1: General requirements This national standard is the identical implementation of IEC 61869-1:2007 and
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-5-51 Fifth edition 2005-04 Electrical installations of buildings Part 5-51: Selection and erection of electrical equipment Common rules This English-language version is
More information5 m pre-wired 2NC/1NO F3S-TGR-NLMX m pre-wired 2NC/1NO F3S-TGR-NLMX m pre-wired 2NC/1NO F3S-TGR-NBMX-21-05
Explosion proof Non-contact Safety Switches Explosion proof reed non-contact switches monitor the status of guarding doors in petro-chemical and food applications with explosive atmospheres. Based on reed
More informationDatasheet - AZM 161SK-12/12RK-024
30.10.2017-13:15:19h Datasheet - AZM 161SK-12/12RK-024 Solenoid interlock / AZM 161 Preferred typ Thermoplastic enclosure Double-insulated Interlock with protection against incorrect locking. 130 mm x
More informationOperating Guide Safe Torque Off
ENGINEERING TOMORROW Operating Guide Safe Torque Off VLT Frequency Converters vlt-drives.danfoss.com Contents Operating Guide Contents 1 Introduction 2 1.1 Purpose of the Manual 2 1.2 Additional Resources
More informationPRODUCT SPECIFICATION. 0.5mm Fine Stacking. Hermaphroditic Type BTB Connector
PRODUCT SPECIFICATION 108-115057 29OCT13 Rev. A1 0.5mm Fine Stacking Hermaphroditic Type BTB Connector 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for 0.5mm
More informationCat. N. Cat. N (s) 1. DESCRIPTION - USE 3. OVERALL DIMENSIONS. Technology : 4. PREPARATION - CONNECTION 2. PRODUCT RANGE
Cat. N STOP & GO automatic resetting 87045 LIMOGES Cedex - FRANCE Telephone : + 33 5 55 06 87 87 Fax: + 33 5 55 06 88 88 Cat. N (s) : 4 062 88 / 4 062 89 CONTENTS PAGE 1. Description - Use... 1 2. Product
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60738-1 QC 440000 Second edition 1998-11 Thermistors Directly heated positive step-function temperature coefficient Part 1: Generic specification Thermistances à basculement
More informationEurofyre Limited range of ProFyre C24 Control and Indicating Equipment (refer to attached appendix for details and conditions) Certification Manager
In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation), this certificate applies to the construction product(s) Product(s):
More informationAS/NZS :2014
Australian/New Zealand Standard Safety of machinery AS/NZS 4024.1905:2014 (IEC 61310-2, Ed. 2.0 (2007), IDT) Part 1905: Displays, controls, actuators and signals Indication, marking and actuation Requirements
More informationSafety Rope Pull Switches SRM, SR. General information on safety rope pull switches
Safety Rope Pull Switches SRM, SR SRM SR General information on safety rope pull switches The series SR and SRM safety rope pull switching devices developed and manufactured by BERNSTEIN AG are designed
More informationETSI TS V1.2.1 ( )
TS 100 783 V1.2.1 (2004-08) Technical Specification Transmission and Multiplexing (TM); Passive optical components; Fibre optic fusion splices for single-mode optical fibre transmission systems for indoor
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28409-1 Edition 2.1 IEC 60730-2-9:2011 Edition 3.1 SOUTH AFRICAN NATIONAL STANDARD Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature
More informationRSWT. Three phase AC pumps and ventilators soft starter. Benefits. Description
Three phase AC pumps and ventilators soft starter Description Benefits Easy to use. The is equipped with a self-learning algorithm that automatically adjusts the start parameters to optimise the motor
More informationIECEx TEST REPORT IEC Explosive atmospheres Part 0: Equipment General requirements
ExTR Reference Number...: ExTR Free Reference Number...: 223531 Compiled by + signature (ExTL)...: Reviewed by + signature (ExTL)...: NO/NEM/ExTR12.0018/00 Stig André Norheim Arne Hortman Date of issue...:
More informationTranslation Supplementary requirements for the testing and certification of Safety relays
Translation Supplementary requirements for the testing and certification of Safety relays Status as of / Principles of testing Safety relays GS-ET-20 Expert committee for electrical engineering Testing
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27031-5 Edition 4.2 IEC 60238:2011 Edition 8.2 SOUTH AFRICAN NATIONAL STANDARD Edison screw lampholders This national standard is the identical implementation of IEC 60238:2011 and is adopted
More informationOperation and use. Functions and characteristics
Operation and use Function Vigirex relays measure the earth-leakage current in an electrical installation via their associated toroids. Vigirex relays may be used for: b residual-current protection (RH10,
More informationMar11 Rev B
Product Specification 108-1576-2 11Mar11 Rev B NETCONNECT*, CHAMP* System 5 Modular Jack Patch Panel 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for NETCONNECT*
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60938-1 QC 280000 Second edition 1999-10 Fixed inductors for electromagnetic interference suppression Part 1: Generic specification Inductances fixes d'antiparasitage Partie
More informationThis is a preview - click here to buy the full publication INTERNATIONAL STAN DARD. Radio-frequency connectors
INTERNATIONAL STAN DARD IEC 61169-1 QC 220000 First edition 1992-09 Radio-frequency connectors Part 1: Generic specification General requirements and measuring methods Connecteurs pour fréquences radioélectriques
More informationProduct Specification JUL07 Rev. F. 1. Scope : 2. Applicable Documents: 3. Requirements : 1 of Contents. 2.1 AMP Specifications :
1. Scope : 1.1 Contents 11JUL07 Rev. F DDR S.O.DIMM Socket 200 Positions This specification covers the requirements for product performance, test methods and quality assurance provisions of DDR S.O.DIMM
More informationType approval qualification of Photovoltaic Modules Procedures and test experiences
Type approval qualification of Photovoltaic Modules Procedures and test experiences We Advise. Develop. Facilitate. Inspect. Certificate. Precisely Right. For You. 1 Type approval qualification of Photovoltaic
More informationCooper Lighting & Safety Limited Wheatley Hall Road, Doncaster, DN2 4NB, United Kingdom
In compliance with Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation or CPR), this certificate applies to the construction
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60079-0 Edition 3.1 2000-06 Edition 3:1998 consolidated with amendment 1:2000 Electrical apparatus for explosive gas atmospheres Part 0: General requirements IEC 2000 Copyright
More informationGRUNDFOS DATA BOOKLET. Hydro Multi-S. Grundfos booster systems with two or three CM, CMV or CR pumps. 50 Hz
GRUNDFOS DATA BOOKLET Grundfos booster systems with two or three CM, CMV or CR pumps 50 Hz Table of contents 1. Product introduction 3 2. Performance range 4 with CM pumps 4 with CMV pumps 4 with CR pumps
More informationEU RO Mutual Recognition Technical Requirements
Adoption 1 April 2016 1. PRODUCT DESCRIPTION... 1 2. DESIGN EVALUATION... 2 3. PRODUCTION REQUIREMENTS... 6 4. MARKING REQUIREMENTS... 6 6. APPROVAL DATE AND REVISION NUMBER... 7 7. BACKGROUND INFORMATION
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Product Test Centre 15 Progress Road Eastwood Leigh-on-Sea Essex SS9 5JA Contact: Mr S Bailey Tel: +44 (0)1702 425738 E-Mail: stuart.bailey@honeywell.com
More informationProcedure for the Approval of New Fire Detection and Alarm Technologies
VdS Guidelines for Automatic Fire Detection and Fire Alarm Systems VdS 3469en Procedure for the Approval of New Fire Detection and Alarm Technologies VdS 3469en : 2016-01 (01) Publisher and publishing
More informationISOMETER IR1575. Insulation monitoring device for unearthed AC/3(N)AC systems up to 480 V and DC systems up to 480 V
Insulation monitoring device for unearthed AC/3(N)AC systems up to 480 V and DC systems up to 480 V IR1575_D00116_00_D_XXEN/05.2015 Insulation monitoring device for unearthed AC/3(N)AC systems up to 480
More informationExPolar Heating System
ExPolar Heating System for use with Max actuators and Cos / Bin / Reg sensors in extreme temperatures to 50 C ATEX certified in acc. with directive 201 / / EU for use in zones 1, 2, 21 and 22 ExPolar -...
More informationSafety Cable Pull Switches SRM, SR. General information on safety cable pull switches
Safety Cable Pull Switches SRM, SR SRM SR General information on safety cable pull switches The series SR and SRM safety cable pull switching devices developed and manufactured by BERNSTEIN AG are designed
More informationIECEx Certificate of Conformity
Certificate of Conformity: IECEx SIR 09.0111 http://iecex.iec.ch/iecex/iecexweb.nsf/fc034777969a786bc1256d42005bd791/f076962... Page 1 of 3 22/01/2010 IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL
More informationSensaGuard TM Integrated Latch Installation Instructions
TM Integrated Latch Installation Instructions Certifications IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE Note: Refer to Technical Specifications for Certification information and ratings. 2 TM Installation
More informationSD119 Range of Conventional Smoke and Smoke/Heat Detectors (refer to attached appendix for details and conditions)
In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation), this certificate applies to the construction product(s).
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62052-11 First edition 2003-02 Electricity metering equipment (AC) General requirements, tests and test conditions Part 11: Metering equipment This English-language version is
More informationFire detection and alarm systems. Part 4: Power supply equipment (ISO :2003, MOD) AS (Incorporating Amendment No.
AS 7240.4 2004 (Incorporating Amendment No. 1) AS 7240.4 2004 Fire detection and alarm systems Part 4: Power supply equipment (ISO 7240-4:2003, MOD) This Australian Standard was prepared by Committee FP-002,
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62040-1-2 First edition 2002-08 Uninterruptible power systems (UPS) Part 1-2: General and safety requirements for UPS used in restricted access locations Alimentations sans interruption
More informationHARMONISATION STATUS OF SELECTED ELECTRICAL AND NON-ELECTRICAL Ex STANDARDS MARCH 2018
Harmonisation status of selected electrical and non-electrical ex standards BAS-PS-010 - Issue 1 - March 2018 P. 1 HARMONISATION STATUS OF SELECTED ELECTRICAL AND NON-ELECTRICAL Ex STANDARDS MARCH 2018
More informationISO INTERNATIONAL STANDARD. Fire detection and alarm systems Part 3: Audible alarm devices
INTERNATIONAL STANDARD ISO 7240-3 First edition 2010-12-15 Fire detection and alarm systems Part 3: Audible alarm devices Systèmes de détection et d'alarme d'incendie Partie 3: Dispositifs d'alarme sonores
More informationProduct Test report. Security Systems TO WHOM IT MAY CONCERN. Bosch Security Systems Torenallee 49 Eindhoven 5617 BA The Netherlands AT18-Q1616
TO WHOM IT MAY CONCERN Product Test report Bosch Security Systems Torenallee 49 Eindhoven 5617 BA The Netherlands AT18-Q1616 Product name: BOSCH FLEXIDOME IP indoor 4000 HD/IR BOSCH FLEXIDOME IP indoor
More informationJun08 Rev A
Product Specification Terminal Block Crimp Snap Plug Assembly 108-2319 09Jun08 Rev A 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the Tyco Electronics
More informationFT702LT Turbine control wind sensor gives durability a new meaning FT702LT. series
FT702LT Turbine control wind sensor......gives durability a new meaning FT702LT series Proven High Availability The FT702LT ultrasonic anemometer is the result of FT Technologies 10 years of experience
More informationATM Lighting sp. z o.o
INSTALLATION AND MAINTENANCE MANUAL FOR EXPLOSIONPROOF LIGHT FITTING EXL210LED Carefully read the instructions before mounting the light fitting. ATM Lighting sp. z o.o., ul. Budowlanych 31, 80-298 Gdańsk,
More informationISOMETER IR425. Insulation monitoring device for unearthed AC/DC control circuits (IT systems)
ISOMETER IR425 Insulation monitoring device for unearthed AC/DC control circuits (IT systems) IR425-D4_D00039_04_D_XXEN/05.2017 ISOMETER IR425 Insulation monitoring device for unearthed AC/DC control circuits
More informationOperating Manual MS220KA and MSR220KA
Temperature Relays and MINIKA, Mains Monitoring, Digital Panel meters MINIPAN, Switching Relays and Controls Operating Manual MS220KA and MSR220KA ZIEHL industrie elektronik GmbH + Co KG Daimlerstraße
More informationSpecification for Portable Traffic Signal Control Equipment for use at Roadworks
traffic systems and signing TR 2502 Issue A June 2005 Specification for Portable Traffic Signal Control Equipment for use at Crown Copyright 2005 First Published 2005 Printed and published by the Highways
More informationOperating Manual MS220DA
ZIEHL industrie elektronik GmbH + Co KG Daimlerstraße 13, D 74523 Schwäbisch Hall + 49 791 504-0, info@ziehl.de, www.ziehl.de Temperature Relays and MINIKA Mains Monitoring Digital Panel Meters MINIPAN
More informationAS/NZS 3133:2008 AS/NZS
Incorporating Amendment No. 1 and 2 Australian/New Zealand Standard Approval and test specification Air-break switches Superseding AS/NZS 3133:2008 This joint Australian/New Zealand standard was prepared
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60076-11 First edition 2004-05 Power transformers Part 11: Dry-type transformers This English-language version is derived from the original bilingual publication by leaving out
More informationVACUUM CONTACTOR TYPE SVC-T 32. 7,2 kv A MANUAL FOR MOUNTING, OPERATION AND MAINTENANCE
VACUUM CONTACTOR TYPE SVC-T 32 7,2 kv - 400 A MANUAL FOR MOUNTING, OPERATION AND MAINTENANCE CONTENTS PAGE 1. Introduction...2 1.1 Acceptance inspection on delivery...2 2. General...2 3. Standards and
More informationIECEx Certificate of Conformity
Page 1 of 4 IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD IEC 60898-1 Edition 2.0 2015-03 Electrical accessories Circuit-breakers for overcurrent protection for household and similar installations Part 1: Circuit-breakers for a.c. operation
More informationThis is a preview - click here to buy the full publication. High-voltage switchgear and controlgear
IEC/PAS 62271-109 Edition 1.0 2002-07 High-voltage switchgear and controlgear Part 109: Alternating-current series capacitor by-pass switches PUBLICLY AVAILABLE SPECIFICATION INTERNATIONAL ELECTROTECHNICAL
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Langer Road Contact: Mr I Frost Felixstowe Tel: +44 (0)1394 694000 Suffolk Fax: +44 (0)1394 276030 IP11 2ER E-Mail: ian.frost@itron.com Website:
More informationLC1 Modular Ceiling Loudspeaker Range. en Installation note
LC1 Modular Ceiling Loudspeaker en Installation note LC1 Modular Ceiling Loudspeaker Table of Contents en 3 Table of contents 1 System Overview 4 1.1 Housings 4 1.2 Loudspeakers 5 1.3 Accessories 6 2
More informationCIRCUIT BREAKER FAIL PROTECTION
CIRCUIT BREAKER FAIL PROTECTION This document is for Relevant Electrical Standards document only. Disclaimer NGG and NGET or their agents, servants or contractors do not accept any liability for any losses
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60539-1 QC 430000 First edition 2002-02 Directly heated negative temperature coefficient thermistors Part 1: Generic specification Thermistors à coefficient de température négatif
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60939-2 Second edition 2005-02 Passive filter units for electromagnetic interference suppression Part 2: Sectional specification Passive filter units for which safety tests are
More informationDNVGL-CP-0407 Edition February 2016
CLASS PROGRAMME Type approval DNVGL-CP-0407 Edition February 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationAdditional deviations may possibly be found if a complete type test is carried out on the product.
Diary No. 13EV4171 Reference No 1315333 MARKET SURVEILLANCE TEST REPORT - LVD The tests cover parts of the requirements for AC adapter stated in the standard SS-EN 60950: 2006 + A11 + A1 + A12 and EN 50075.
More informationEXNBG CLARIFICATION/DECISION SHEETS NOTED BY THE ATEX STANDING COMMITTEE STATUS ON DECEMBER 2009
EXNBG CLARIFICATION/DECISION SHEETS NOTED BY THE ATEX STANDING COMMITTEE STATUS ON DECEMBER 2009 Number ExNB/CS/ DS (1) Edition Subject / Keywords 98/06/001 1.0 Certification of a torch according to EN
More informationSafety Function: Single-beam Area Access Control (AAC)
Application Technique Safety Function: Single-beam Area Access Control (AAC) Products: Guardmaster Dual-input Safety Relay, Single-beam Area Access Control Sensors with E-stop Safety Rating: CAT. 4, PLe
More informationJun08 Rev C
Product Specification Connector, Card Edge,.050 Centerline 108-14034 02Jun08 Rev C 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for Tyco Electronics.050 centerline
More informationPlug shell and receptacle, single cavity, floating, EN Application of modular rectangular modules and shells per EN4165
PRODUCT SPECIFICATION Sep 22, 29 Rev. B CONNECTOR, SINGLE CAVITY, AEROSPACE, PANEL MOUNT, FLOATING, EN416 1 - SCOPE 1.1. Content This document covers the performances, tests, and quality requirements of
More informationAS/NZS 3120:2011. Approval and test specification Cord extension sockets AS/NZS 3120:2011. Australian/New Zealand Standard
AS/NZS 3120:2011 Incorporating Amendment No. 1 Australian/New Zealand Standard Approval and test specification Cord extension sockets AS/NZS 3120:2011 AS/NZS 3120:2011 This Joint Australian/New Zealand
More informationAccumulated Battery JULY The electronic pdf version of this document found through is the officially binding version
p pproval roramms for U rcos orasato Mutual coto (M)No. 2.9 STANDARD FOR CERTIFICATION Approval Programmes Type Approval Programmes for EU recognised organisation Mutual Recognition (MR) No. MR-E008 Accumulated
More informationPerformance Specification for Rising Bollards Control Systems
traffic systems and signing TR 2510 Issue A July 2005 Performance Specification for Rising Bollards Control Systems Crown Copyright 2005 First published 2005 Printed and published by the Highways Agency
More informationProvläsningsexemplar / Preview TECHNICAL REPORT
TECHNICAL REPORT IEC 61010-3-010 First edition 1999-02 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 3-010: Conformity verification report for IEC 61010-2-010,
More informationISO INTERNATIONAL STANDARD. Agricultural engineering Electrical and electronic equipment Testing resistance to environmental conditions
INTERNATIONAL STANDARD ISO 15003 First edition 2006-02-15 Agricultural engineering Electrical and electronic equipment Testing resistance to environmental conditions Génie agricole Matériel électrique
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61892-1 First edition 2001-12 Mobile and fixed offshore units Electrical installations Part 1: General requirements and conditions Unités fixes et mobiles en mer Installations
More informationGMA Panels with double busbar
L1 L2 L3 GAS-INSULATED SWITCHGEAR >> GMA Panels with double busbar Operating Instructions No. AGS 532 521-01 Edition 09/07 (Supplement to Operating Instructions AGS 531 521-01) Technical Instructions AREVA
More informationConformity Approvals Rated insulation voltage Ui
GIOVENZANA INTERNATIONAL B.V. GENERAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS CONTACT BLOCKS CAM SWITCHES Giovenzana International B.V., widely recognized as a leader in elevator technology and the
More information