SOUTH AFRICAN NATIONAL STANDARD
|
|
|
- Calvin Sharp
- 5 years ago
- Views:
Transcription
1 ISBN IEC :2010 SOUTH AFRICAN NATIONAL STANDARD Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements This national standard is the identical implementation of IEC :2010 and is adopted with the permission of the International Electrotechnical Commission. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: Fax: SABS
2 IEC :2010 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee SABS TC 72, Safety of electrical appliances and electronic equipment, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in March This SANS document supersedes SANS :2004 (edition 2). This SANS document is referenced in the Compulsory specification for electrical and electronic apparatus, as published by Government Notice No. R. 89 (Government Gazette 31844) of 6 February 2009.
3 INTERNATIONAL STANDARD NORME INTERNATIONALE IEC colour inside GROUP SAFETY PUBLICATION PUBLICATION GROUPÉE DE SÉCURITÉ Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire Partie 1: Exigences générales INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE PRICE CODE CODE PRIX XH ICS ; ISBN Registered trademark of the International Electrotechnical Commission Marque déposée de la Commission Electrotechnique Internationale
4 IEC:2010 CONTENTS FOREWORD...10 INTRODUCTION Scope and object Scope Equipment included in scope Equipment excluded from scope Computing equipment Object Aspects included in scope Aspects excluded from scope Verification Environmental conditions Normal environmental conditions Extended environmental conditions Normative references Terms and definitions Equipment and states of equipment Parts and accessories Quantities Tests Safety terms Insulation Tests General Sequence of tests Reference test conditions Environmental conditions State of equipment Testing in SINGLE FAULT CONDITION General Application of fault conditions Duration of tests Conformity after application of fault conditions Marking and documentation Marking General Identification MAINS supply Fuses TERMINALS, connections and operating devices Switches and circuit-breakers Equipment protected by DOUBLE INSULATION or REINFORCED INSULATION Field-wiring TERMINAL boxes Warning markings Durability of markings...34
5 IEC: Documentation General Equipment RATINGS Equipment installation Equipment operation Equipment maintenance and service Integration into systems or effects resulting from special conditions Protection against electric shock General Requirements Exceptions Determination of ACCESSIBLE parts General Examination Openings above parts that are HAZARDOUS LIVE Openings for pre-set controls Limit values for ACCESSIBLE parts Levels in NORMAL CONDITION Levels in SINGLE FAULT CONDITION Primary means of protection General ENCLOSURES and PROTECTIVE BARRIERS BASIC INSULATION Impedance Additional means of protection in case of SINGLE FAULT CONDITIONS General PROTECTIVE BONDING SUPPLEMENTARY INSULATION and REINFORCED INSULATION PROTECTIVE IMPEDANCE Automatic disconnection of the supply Current- or voltage-limiting device Connections to external circuits General TERMINALS for external circuits Circuits with TERMINALS which are HAZARDOUS LIVE TERMINALS for stranded conductors Insulation requirements The nature of insulation Insulation for MAINS CIRCUITS of OVERVOLTAGE CATEGORY II with a nominal supply voltage up to 300 V Insulation for secondary circuits derived from MAINS CIRCUITS of OVERVOLTAGE CATEGORY II up to 300 V Procedure for voltage tests General Humidity preconditioning Test procedures Constructional requirements for protection against electric shock General Insulating materials...64
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30971-8 SOUTH AFRICAN NATIONAL STANDARD Information technology equipment Safety Part 1: General requirements This national standard is the identical implementation of, and is adopted with
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28897-6 IEC 61869-1:2007 SOUTH AFRICAN NATIONAL STANDARD Instrument transformers Part 1: General requirements This national standard is the identical implementation of IEC 61869-1:2007 and
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27031-5 Edition 4.2 IEC 60238:2011 Edition 8.2 SOUTH AFRICAN NATIONAL STANDARD Edison screw lampholders This national standard is the identical implementation of IEC 60238:2011 and is adopted
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32266-3 Edition 3.2 IEC 60335-2-29:2010 Edition 4.2 SOUTH AFRICAN NATIONAL STANDARD Household and similar electrical appliances Safety Part 2-29: Particular requirements for battery chargers
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34222-7 IEC 61558-2-9:2010 SOUTH AFRICAN NATIONAL STANDARD Safety of transformers, reactors, power supply units and combinations thereof Part 2-9: Particular requirements and tests for transformers
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28409-1 Edition 2.1 IEC 60730-2-9:2011 Edition 3.1 SOUTH AFRICAN NATIONAL STANDARD Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature
SANS :2014 Edition 1 IEC :2012 Edition 1
ISBN 978-0-626-29479-3 IEC 60601-2-66:2012 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments
SANS :2014 Edition 1 IEC :2012 Edition 1
ISBN 978-0-626-29823-4 IEC 60601-2-65:2012 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29193-8 Edition 1.2 IEC 60432-1:2012 Edition 2.2 SOUTH AFRICAN NATIONAL STANDARD Incandescent lamps Safety specifications Part 1: Tungsten filament lamps for domestic and similar general
SOUTH AFRICAN NATIONAL STANDARD. Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
ISBN 978-0-626-33793-3 Edition 1.1 IEC 60601-2-19:2016 Edition 2.1 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-19: Particular requirements for the basic safety essential performance
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30910-7 SOUTH AFRICAN NATIONAL STANDARD Electrical security systems Part 2-2: Access control systems Central processor WARNING This document references other documents normatively. Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21598-9 ISO 14520-1:2006 SOUTH AFRICAN NATIONAL STANDARD Gaseous fire-extinguishing systems Physical properties and system design Part 1: General requirements This national standard is the
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30618-2 ISO 80601-2-61:2011 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22437-0 Any reference to SABS 0114-2 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Interior lighting Part 2:
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27010-0 SOUTH AFRICAN NATIONAL STANDARD Protection against lightning Physical damage to structures and life hazard WARNING Can only be used in conjunction with the SANS 62305 series. Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25898-6 IEC 61400-25-6:2010 SOUTH AFRICAN NATIONAL STANDARD Wind turbines Part 25-6: Communications for monitoring and control of wind power plants Logical node classes and data classes
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33970-8 SOUTH AFRICAN NATIONAL STANDARD Electric flexible cables with solid extruded dielectric insulation Part 4: Rubber-insulated cables for domestic, office and similar environments (cords)
SOUTH AFRICAN NATIONAL STANDARD
Copying and network storage prohibited. ISBN 978-0-626-32227-4 SANS 60947-5-6:1999 Edition 1 and nat. amdt 1 IEC 60947-5-6:1999 Edition 1 Any reference to SABS IEC 60947-5-6 is deemed to be a reference
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23127-9 SOUTH AFRICAN NATIONAL STANDARD Portable refillable fire extinguishers Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33724-7 IEC 60364-7-712:2002 SOUTH AFRICAN NATIONAL STANDARD Electrical installations of buildings Part 7-712: Requirements for special installations or locations Solar photovoltaic (PV)
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29493-9 Any reference to SABS 0222-5-1-3 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Electrical security
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-2-31560-3 SOUTH AFRICAN NATIONAL STANDARD Electric cables for motor vehicles Ignition cables for motor vehicles Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30262-7 SOUTH AFRICAN NATIONAL STANDARD The installation, inspection and maintenance of equipment used in explosive atmospheres Part 1: Installations including surface installations on mines
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34241-8 SOUTH AFRICAN NATIONAL STANDARD Industrial body belts Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax: +27
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28655-2 Edition 1 and nat. amdt 1 ISO 7866:1999 Edition 1 Any reference to SABS ISO 7866 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31263-3 SOUTH AFRICAN NATIONAL STANDARD Disposable portable condensed aerosol fire extinguishers WARNING This document references other documents normatively. Published by SABS Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-36792-3 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Methods of test for assessment of the fire integrity of electric cables Part 2: Test for unprotected small cables for use in emergency circuits
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26992-0 SOUTH AFRICAN NATIONAL STANDARD Fire detection and alarm systems for buildings System design, installation and servicing Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30385-3 SOUTH AFRICAN NATIONAL STANDARD The installation, maintenance, repair and replacement of domestic solar water heating systems WARNING This document references other documents normatively.
SOUTH AFRICAN NATIONAL STANDARD
ICS 13.220.01 ISBN 0-626-14666-6 SOUTH AFRICAN NATIONAL STANDARD Community protection against fire Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31129-2 SOUTH AFRICAN NATIONAL STANDARD Symbolic safety signs Part 1: Standard signs and general requirements WARNING This document references other documents normatively. Published by SABS
SANS :2012 Edition 1.8
ISBN 978-0-626-26767-4 SOUTH AFRICAN NATIONAL STANDARD The wiring of premises Part 1: Low-voltage installations Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21896-6 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Medical gas pipeline systems Part 1: Pipeline systems for compressed medical gases and vacuum This national standard is a modified adoption
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22857-6 SOUTH AFRICAN NATIONAL STANDARD Eye-protectors for industrial and non-industrial use Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28120-5 SOUTH AFRICAN NATIONAL STANDARD Low-foam laundry detergent (for use in automatic and non-automatic domestic washing machines) Published by SABS Standards Division 1 Dr Lategan Road
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28516-6 IEC 62053-11:2003 SOUTH AFRICAN NATIONAL STANDARD Electricity metering equipment (a.c.) Particular requirements Part 11: Electromechanical meters for active energy (classes 0,5,
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32798-9 SOUTH AFRICAN NATIONAL STANDARD Gas measuring equipment primarily for use in mines Part 5: Fire detectors WARNING This standard references other documents normatively. Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28875-4 Edition 1.2 IEC 60227-5:2003 SOUTH AFRICAN NATIONAL STANDARD Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 5: Flexible cables (cords) This
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26239-6 SOUTH AFRICAN NATIONAL STANDARD Design, selection and installation of geomembranes Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
SANS 21-1:2009 Edition 1 EN 115-1:2008
ISBN 978-0-626-22589-6 EN 115-1:2008 SOUTH AFRICAN NATIONAL STANDARD Safety of escalators and moving walks Part 1: Construction and installation This national standard is the identical implementation of
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22587-2 RSR 001:2009 SOUTH AFRICAN NATIONAL STANDARD Railway safety management Part 1: General Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23465-2 SOUTH AFRICAN NATIONAL STANDARD The use and control of fire-fighting equipment Part 2: Fire hose reels and above-ground hydrants Amdt 1 Published by SABS Standards Division 1 Dr
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61010-2-010 Second edition 2003-06 GROUP SAFETY PUBLICATION Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-010: Particular requirements
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34367-5 Edition 1 (incorporating EN amdt 1, EN corr. 1) EN 1492-1:2000 Edition 1 (incorporating amdt 1, corr. 1) SOUTH AFRICAN NATIONAL STANDARD Textile slings Safety Part 1: Flat woven
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31262-6 SOUTH AFRICAN NATIONAL STANDARD Olive oils and olive-pomace oils Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24110-0 SANS 50354:2003 EN 354:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Lanyards This national standard is the identical implementation
Provläsningsexemplar / Preview TECHNICAL REPORT. Part 3-1: Conformity verification report for IEC :2001 General requirements
TECHNICAL REPORT IEC TR 61010-3-1 Second edition 2003-04 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 3-1: Conformity verification report for IEC 61010-1:2001
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28010-9 Edition 1 and nat. amdt 1 ISO 3743-2:1994 Edition 1 Any reference to SABS ISO 3743-2 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002)
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32289-2 Edition 1 EN 1176-7:2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23963-3 SANS 50353-1:2003 EN 353-1:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Guided type fall arresters including a rigid anchor line
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is
DRAFT TANZANIA STANDARD
EDC 4 (5309) P3 IEC 62642-5-3: 2010 DRAFT TANZANIA STANDARD (Draft for comments only) Alarm systems - Intrusion and hold-up systems Part 5-3: Interconnections - Requirements for equipment using radio frequency
This draft Tanzania Standard gives the general requirements and conditions for electrical tests to be performed on coaxial communication cables.
National Foreword 1 Introduction This draft Tanzania Standard is being prepared by the Communication Equipment Technical Committee, under the supervision of the Electrical Engineering Divisional Standards
Provläsningsexemplar / Preview TECHNICAL REPORT
TECHNICAL REPORT IEC 61010-3-010 First edition 1999-02 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 3-010: Conformity verification report for IEC 61010-2-010,
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27398-9 Edition 1 EN 14509:2013 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Self-supporting double skin metal faced insulating panels Factory made products Specifications This national standard
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33591-5 EN 12353:2013 SOUTH AFRICAN NATIONAL STANDARD Chemical disinfectants and antiseptics Preservation of test organisms used for the determination of bactericidal (including Legionella),
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32290-8 EN 1176-10:2008 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32335-6 Edition 1 (incorporating EN amdt 1) EN 13795:2011 Edition 2 (incorporating amdt 1) SOUTH AFRICAN NATIONAL STANDARD Surgical drapes, gowns and clean air suits, used as medical devices
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62040-1-2 First edition 2002-08 Uninterruptible power systems (UPS) Part 1-2: General and safety requirements for UPS used in restricted access locations Alimentations sans interruption
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60352-7 First edition 2002-08 Solderless connections Part 7: Spring clamp connections General requirements, test methods and practical guidance Connexions sans soudure Partie
This document is a preview generated by EVS
INTERNATIONAL STANDARD NORME INTERNATIONALE IEC 61010-1 Edition 3.0 2010-06 colour inside GROUP SAFETY PUBLICATION PUBLICATION GROUPÉE DE SÉCURITÉ Safety requirements for electrical equipment for measurement,
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60092-376 Second edition 2003-05 Electrical installations in ships Part 376: Cables for control and instrumentation circuits 150/250 V (300 V) Installations électriques à bord
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30561-1 Edition 2 and EN tech. corr. 1 EN 1423:2012 Edition 2 and tech. corr. 1 SOUTH AFRICAN NATIONAL STANDARD Road marking materials Drop on materials Glass beads, antiskid aggregates
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-24 Sixth edition 2002-10 Household and similar electrical appliances Safety Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60227-1 Edition 2.2 1998-03 Edition 2:1993 consolidated with amendments 1:1995 and 2:1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-4-41 Fourth edition 2001-08 GROUP SAFETY PUBLICATION Electrical installations of buildings Part 4-41: Protection for safety Protection against electric shock This English-language
DRAFT TANZANIA STANDARD
EEDC 4 (5155) P3 IEC 62642-2-4: 2010 DRAFT TANZANIA STANDARD (Draft for comments only) Alarm systems Intrusion and hold-up systems Part 2-4: Intrusion detectors Combined passive infrared / Microwave detectors
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-74 Second edition 2002-10 Household and similar electrical appliances Safety Part 2-74: Particular requirements for portable immersion heaters Appareils électrodomestiques
Licensed exclusively to SABS. Copying and network storage prohibited.
ICS 29.240.20 ISBN 0-626-10879-9 SABS 0198-14* *This standard references other standards Edition 2 1996 SOUTH AFRICAN STANDARD Code of practice The selection, handling and installation of electric power
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61892-1 First edition 2001-12 Mobile and fixed offshore units Electrical installations Part 1: General requirements and conditions Unités fixes et mobiles en mer Installations
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-75 Second edition 2002-11 Household and similar electrical appliances Safety Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-52 Third edition 2002-10 Household and similar electrical appliances Safety Part 2-52: Particular requirements for oral hygiene appliances Appareils électrodomestiques
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-6 First edition 2006-02 Low-voltage electrical installations Part 6: Verification This English-language version is derived from the original bilingual publication by leaving
This document is a preview generated by EVS
INTERNATIONAL STANDARD IEC 60335-2-37 Fifth edition 2002-10 Household and similar electrical appliances Safety Part 2-37: Particular requirements for commercial electric deep fat fryers Appareils électrodomestiques
This document is a preview generated by EVS
TECHNICAL REPORT IEC TR 60825-5 Second edition 2003-06 Safety of laser products Part 5: Manufacturer's checklist for IEC 60825-1 Sécurité des appareils à laser Partie 5: Liste de contrôle du fabricant
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-6 First edition 2006-02 Low-voltage electrical installations Part 6: Verification This English-language version is derived from the original bilingual publication by leaving
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61810-1 Second edition 2003-08 Electromechanical elementary relays Part 1: General and safety requirements Relais électromécaniques élémentaires Partie 1: Exigences générales
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-42 Fifth edition 2002-11 Household and similar electrical appliances Safety Part 2-42: Particular requirements for commercial electric forced convection ovens, steam
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-4-41 Fifth edition 2005-12 GROUP SAFETY PUBLICATION Low-voltage electrical installations Part 4-41: Protection for safety This English-language version is derived from
ISO INTERNATIONAL STANDARD. Oscillation-type density meters Part 1: Laboratory instruments
INTERNATIONAL STANDARD ISO 15212-1 First edition 1998-10-01 Oscillation-type density meters Part 1: Laboratory instruments Densimètres à oscillations Partie 1: Instruments de laboratoire A Reference number
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-4-43 Second edition 2001-08 Electrical installations of buildings Part 4-43: Protection for safety This English-language version is derived from the original bilingual
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61241-1-2 Second edition 1999-06 Electrical apparatus for use in the presence of combustible dust Part 1-2: Electrical apparatus protected by enclosures and surface temperature
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-23 Fifth edition 2003-01 Household and similar electrical appliances Safety Part 2-23: Particular requirements for skin or hair care Sécurité des appareils électrodomestiques
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60519-1 Third edition 2003-07 Safety in electroheat installations Part 1: General requirements Sécurité dans les installations électrothermiques Partie 1: Exigences générales
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-67 Third edition 2002-07 Household and similar electrical appliances Safety Part 2-67: Particular requirements for floor treatment and floor cleaning machines, for industrial
ISO Safety of machinery Laser processing machines Part 1: General safety requirements
INTERNATIONAL STANDARD ISO 11553-1 First edition 2005-02-01 Safety of machinery Laser processing machines Part 1: General safety requirements Sécurité des machines Machines à laser Partie 1: Prescriptions
ISO INTERNATIONAL STANDARD. Industrial fans Mechanical safety of fans Guarding
INTERNATIONAL STANDARD ISO 12499 First edition 1999-10-15 Industrial fans Mechanical safety of fans Guarding Ventilateurs industriels Sécurité mécanique des ventilateurs Protecteurs A Reference number
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-59 Third edition 2002-10 Household and similar electrical appliances Safety Part 2-59: Particular requirements for insect killers Appareils électrodomestiques et analogues
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-70 Second edition 2002-03 Household and similar electrical appliances Safety Part 2-70: Particular requirements for milking machines Appareils électrodomestiques et analogues
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-55 Third edition 2002-11 Household and similar electrical appliances Safety Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 23551-4 First edition 2005-08-15 Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 4: Valve-proving systems for automatic shut-off
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-65 Second edition 2002-10 Household and similar electrical appliances Safety Part 2-65: Particular requirements for air-cleaning appliances Appareils électrodomestiques
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-17 Second edition 2002-10 Household and similar electrical appliances Safety Part 2-17: Particular requirements for blankets, pads and similar flexible heating appliances
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-5-54 Second edition 2002-06 BASIC SAFETY PUBLICATION Electrical installations of buildings Part 5-54: Selection and erection of electrical equipment Earthing arrangements,
ISO INTERNATIONAL STANDARD. Safety of machinery Laser processing machines Part 1: General safety requirements
INTERNATIONAL STANDARD ISO 11553-1 First edition 2005-02-01 Safety of machinery Laser processing machines Part 1: General safety requirements Sécurité des machines Machines à laser Partie 1: Prescriptions
DRAFT TANZANIA STANDARD
EEDC 4 (5157) P3 IEC 62599-1: 2010 DRAFT TANZANIA STANDARD (Draft for comments only) Alarm systems Part 1: Environmental test methods TANZANIA BUREAU OF STANDARDS TBS 2017 First Edition 2017 0 National
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-53 Third edition 2002-10 Household and similar electrical appliances Safety Part 2-53: Particular requirements for sauna heating appliances Appareils électrodomestiques
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61029-2-10 First edition 1998-06 Safety of transportable motor-operated electric tools Part 2-10: Particular requirements for cutting-off grinders Sécurité des machines-outils
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 60204-34 Edition 1.0 2016-08 Safety of machinery Electrical equipment of machines Part 34: Requirements for machine tools INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 13.110;
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-97 Second edition 2002-11 Household and similar electrical appliances Safety Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar