SANS :2012 Edition 1.8
|
|
|
- Dortha McDaniel
- 5 years ago
- Views:
Transcription
1 ISBN SOUTH AFRICAN NATIONAL STANDARD The wiring of premises Part 1: Low-voltage installations Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: Fax: SABS
2 SANS :2009 Edition 1.7 Table of changes Change No. Date Scope Amdt 1 Jan Amended to change the number of the standard and the numbers of referenced standards, include a Regulator's Compliance Certificate (RCC) and specially tested assemblies (STA) as proof of compliance, clarify the requirements for distribution boards by adding definitions and a new annex (annex S), amend the requirements for surge protection, and change them to recommendations (included in annex L), amend the requirements for the bonding of antennas, delete the requirements for electric fences, change the requirements for extra low voltage lighting and delete the determination of earth resistance. Tech corr. 1 March 2003 Changed to correct errors in the introduction, in and in (a). Amdt 2 Aug Amended to remove the implementation date for proof of compliance of distribution boards. Amdt 3 Dec Amended to delete implementation requirements and references to specific national legislation from the normative part of the standard, rearrange the requirements for distribution boards, clarify the rating requirements for earth leakage units, add requirements for the connection of flexible cords and the indication of the position of the main switch, and to update normative references.
3 SANS :2009 Edition 1.7 (As amended 2008 and 2009) Table of changes (continued) Change No. Date Scope Amdt 4 April 2005 Amended to update and add normative references, to change table 4.2 in respect of circuit-breakers, conduit, switchdisconnectors, transformers and watthour meters, to clarify requirements for disconnection, bonding, earthing, and underfloor heating, and to change the requirements for installations in agricultural locations and at swimming pools. Amdt 5 May 2006 Amended to exclude caravans from the scope of the standard, and to delete annex A, to update referenced standards for socket-outlets and stove couplers, to clarify the accessibility of live parts and distribution boards, and the requirements for open wiring, busbars, prospective short-circuit current, and voltage drop calculations, to add information on the applicability of the values in the current rating and voltage drop tables for cables, and conditions for conductors under screed, buried cables, and inaccessible joints, and to amend the requirements for underfloor heating, telecommunication d.c. power systems, and marking and labelling. Amdt Amended to update referenced standards, to change requirements for busbar systems, surge protective devices (SPDs) and circuit-breakers, to modify requirements for medical locations, and to add requirements for the connection of generating sets and other alternative sources of supply to an electrical installation. 1
4 (As amended 2009 and 2012) Table of changes (concluded) Change No. Date Scope Amdt Amended to change the current Certificate of Compliance (CoC) to a test report and to align references to the CoC in the text to refer to the test report. Amdt Amended to update referenced standards, to add requirements for the installation of CFL lighting, to introduce a label to be fitted to distribution boards to indicate the position of the earthing terminal for bonding of other services, to add a warning related to the type and rating of replacement components of distribution boards, to require that new, added or altered installations comply with this part of SANS 10142, to change the requirements for voltage at available load, and to apply changes to the test report. Foreword This South African standard was approved by National Committee SABS SC 67F, Electricity distribution systems and components Installations, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This document was approved in March For new installations, this document supersedes SANS :2009 (edition 1.7). This edition is identified as edition 1.8 because it incorporates eight amendments. The number 1.8 appears only on the pages affected by amendment No. 8. A vertical line in the margin shows where the text has been modified by the most recent change. 2
5 (As amended 2009 and 2012) The test report in edition 1.7 will be valid in parallel with the test report in edition 1.8 for a period of 12 months from the date of publication of edition 1.7. With the first edition of this part of SANS 10142, the standard was subdivided and now consists of the following parts, under the general title The wiring of premises: Part 1: Low-voltage installations. Part 2: Medium-voltage installations above 1 kv a.c. not exceeding 22 kv a.c. and up to and including kw installed capacity. Table 4.2 contains a list of the applicable standards for the components that may be installed in an electrical installation. In the fourth edition of SANS (SANS 10142:1993), the design and installation requirements appeared in two separate clauses. However, because of the close link between these clauses, in edition 1 of SANS (SANS :2001), the design and installation requirements were combined and are now given in clause 6 as installation requirements. The tables on cables and correction factors have been expanded extensively to align with the current cable specifications and relevant IEC standards. All the fundamental requirements have been grouped together with the safety requirements and are given in clause 5 as fundamental requirements. Special installations or locations are given in clause 7. The clause on medical locations (see 7.7) has been extended and replaces SABS Information on national legislation that applies only in South Africa is given in text boxes in the Introduction (see pages 3(a) and 3(b)), in 8.1, and in the test report (see page 281). The updating of this part of SANS is the responsibility of a working group under the supervision of Committee SABS SC 67F, Electricity distribution systems and components Installations. To ensure that this part of SANS is always up to date, amendments will be introduced regularly. Each change made to the text as a result of an amendment is/will be indicated in the margin by the number of the amendment. Annex L is normative where surge protection is required or installed. Annexes B, C, D, E, F, G, J, K, L, M, N, O, P, Q and R are for information only. 3
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27010-0 SOUTH AFRICAN NATIONAL STANDARD Protection against lightning Physical damage to structures and life hazard WARNING Can only be used in conjunction with the SANS 62305 series. Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22437-0 Any reference to SABS 0114-2 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Interior lighting Part 2:
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30262-7 SOUTH AFRICAN NATIONAL STANDARD The installation, inspection and maintenance of equipment used in explosive atmospheres Part 1: Installations including surface installations on mines
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23127-9 SOUTH AFRICAN NATIONAL STANDARD Portable refillable fire extinguishers Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30910-7 SOUTH AFRICAN NATIONAL STANDARD Electrical security systems Part 2-2: Access control systems Central processor WARNING This document references other documents normatively. Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29493-9 Any reference to SABS 0222-5-1-3 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Electrical security
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31129-2 SOUTH AFRICAN NATIONAL STANDARD Symbolic safety signs Part 1: Standard signs and general requirements WARNING This document references other documents normatively. Published by SABS
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33970-8 SOUTH AFRICAN NATIONAL STANDARD Electric flexible cables with solid extruded dielectric insulation Part 4: Rubber-insulated cables for domestic, office and similar environments (cords)
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28120-5 SOUTH AFRICAN NATIONAL STANDARD Low-foam laundry detergent (for use in automatic and non-automatic domestic washing machines) Published by SABS Standards Division 1 Dr Lategan Road
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-2-31560-3 SOUTH AFRICAN NATIONAL STANDARD Electric cables for motor vehicles Ignition cables for motor vehicles Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34241-8 SOUTH AFRICAN NATIONAL STANDARD Industrial body belts Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax: +27
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26992-0 SOUTH AFRICAN NATIONAL STANDARD Fire detection and alarm systems for buildings System design, installation and servicing Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30385-3 SOUTH AFRICAN NATIONAL STANDARD The installation, maintenance, repair and replacement of domestic solar water heating systems WARNING This document references other documents normatively.
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31263-3 SOUTH AFRICAN NATIONAL STANDARD Disposable portable condensed aerosol fire extinguishers WARNING This document references other documents normatively. Published by SABS Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30971-8 SOUTH AFRICAN NATIONAL STANDARD Information technology equipment Safety Part 1: General requirements This national standard is the identical implementation of, and is adopted with
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27031-5 Edition 4.2 IEC 60238:2011 Edition 8.2 SOUTH AFRICAN NATIONAL STANDARD Edison screw lampholders This national standard is the identical implementation of IEC 60238:2011 and is adopted
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25781-1 IEC 61010-1:2010 SOUTH AFRICAN NATIONAL STANDARD Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements This national
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28409-1 Edition 2.1 IEC 60730-2-9:2011 Edition 3.1 SOUTH AFRICAN NATIONAL STANDARD Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23465-2 SOUTH AFRICAN NATIONAL STANDARD The use and control of fire-fighting equipment Part 2: Fire hose reels and above-ground hydrants Amdt 1 Published by SABS Standards Division 1 Dr
SOUTH AFRICAN NATIONAL STANDARD
ICS 13.220.01 ISBN 0-626-14666-6 SOUTH AFRICAN NATIONAL STANDARD Community protection against fire Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-36792-3 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Methods of test for assessment of the fire integrity of electric cables Part 2: Test for unprotected small cables for use in emergency circuits
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26239-6 SOUTH AFRICAN NATIONAL STANDARD Design, selection and installation of geomembranes Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32798-9 SOUTH AFRICAN NATIONAL STANDARD Gas measuring equipment primarily for use in mines Part 5: Fire detectors WARNING This standard references other documents normatively. Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32266-3 Edition 3.2 IEC 60335-2-29:2010 Edition 4.2 SOUTH AFRICAN NATIONAL STANDARD Household and similar electrical appliances Safety Part 2-29: Particular requirements for battery chargers
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22857-6 SOUTH AFRICAN NATIONAL STANDARD Eye-protectors for industrial and non-industrial use Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28655-2 Edition 1 and nat. amdt 1 ISO 7866:1999 Edition 1 Any reference to SABS ISO 7866 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31262-6 SOUTH AFRICAN NATIONAL STANDARD Olive oils and olive-pomace oils Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28897-6 IEC 61869-1:2007 SOUTH AFRICAN NATIONAL STANDARD Instrument transformers Part 1: General requirements This national standard is the identical implementation of IEC 61869-1:2007 and
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33724-7 IEC 60364-7-712:2002 SOUTH AFRICAN NATIONAL STANDARD Electrical installations of buildings Part 7-712: Requirements for special installations or locations Solar photovoltaic (PV)
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21896-6 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Medical gas pipeline systems Part 1: Pipeline systems for compressed medical gases and vacuum This national standard is a modified adoption
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22587-2 RSR 001:2009 SOUTH AFRICAN NATIONAL STANDARD Railway safety management Part 1: General Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria
Licensed exclusively to SABS. Copying and network storage prohibited.
ICS 29.240.20 ISBN 0-626-10879-9 SABS 0198-14* *This standard references other standards Edition 2 1996 SOUTH AFRICAN STANDARD Code of practice The selection, handling and installation of electric power
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21598-9 ISO 14520-1:2006 SOUTH AFRICAN NATIONAL STANDARD Gaseous fire-extinguishing systems Physical properties and system design Part 1: General requirements This national standard is the
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34222-7 IEC 61558-2-9:2010 SOUTH AFRICAN NATIONAL STANDARD Safety of transformers, reactors, power supply units and combinations thereof Part 2-9: Particular requirements and tests for transformers
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29193-8 Edition 1.2 IEC 60432-1:2012 Edition 2.2 SOUTH AFRICAN NATIONAL STANDARD Incandescent lamps Safety specifications Part 1: Tungsten filament lamps for domestic and similar general
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24110-0 SANS 50354:2003 EN 354:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Lanyards This national standard is the identical implementation
SOUTH AFRICAN NATIONAL STANDARD
Copying and network storage prohibited. ISBN 978-0-626-32227-4 SANS 60947-5-6:1999 Edition 1 and nat. amdt 1 IEC 60947-5-6:1999 Edition 1 Any reference to SABS IEC 60947-5-6 is deemed to be a reference
SOUTH AFRICAN NATIONAL STANDARD. Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
ISBN 978-0-626-33793-3 Edition 1.1 IEC 60601-2-19:2016 Edition 2.1 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-19: Particular requirements for the basic safety essential performance
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25898-6 IEC 61400-25-6:2010 SOUTH AFRICAN NATIONAL STANDARD Wind turbines Part 25-6: Communications for monitoring and control of wind power plants Logical node classes and data classes
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28875-4 Edition 1.2 IEC 60227-5:2003 SOUTH AFRICAN NATIONAL STANDARD Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 5: Flexible cables (cords) This
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23963-3 SANS 50353-1:2003 EN 353-1:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Guided type fall arresters including a rigid anchor line
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28010-9 Edition 1 and nat. amdt 1 ISO 3743-2:1994 Edition 1 Any reference to SABS ISO 3743-2 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002)
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34367-5 Edition 1 (incorporating EN amdt 1, EN corr. 1) EN 1492-1:2000 Edition 1 (incorporating amdt 1, corr. 1) SOUTH AFRICAN NATIONAL STANDARD Textile slings Safety Part 1: Flat woven
SANS :2014 Edition 1 IEC :2012 Edition 1
ISBN 978-0-626-29479-3 IEC 60601-2-66:2012 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30618-2 ISO 80601-2-61:2011 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32289-2 Edition 1 EN 1176-7:2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This
SANS :2014 Edition 1 IEC :2012 Edition 1
ISBN 978-0-626-29823-4 IEC 60601-2-65:2012 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28516-6 IEC 62053-11:2003 SOUTH AFRICAN NATIONAL STANDARD Electricity metering equipment (a.c.) Particular requirements Part 11: Electromechanical meters for active energy (classes 0,5,
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32335-6 Edition 1 (incorporating EN amdt 1) EN 13795:2011 Edition 2 (incorporating amdt 1) SOUTH AFRICAN NATIONAL STANDARD Surgical drapes, gowns and clean air suits, used as medical devices
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-1 Fifth edition 2005-11 Low-voltage electrical installations Part 1: Fundamental principles, assessment of general characteristics, definitions This English-language version
SANS 21-1:2009 Edition 1 EN 115-1:2008
ISBN 978-0-626-22589-6 EN 115-1:2008 SOUTH AFRICAN NATIONAL STANDARD Safety of escalators and moving walks Part 1: Construction and installation This national standard is the identical implementation of
AS/NZS 3190:2011 AS/NZS
AS/NZS 3190:2016 Australian/New Zealand Standard Approval and test specification Residual current devices (currentoperated earth-leakage devices) Superseding AS/NZS 3190:2011 AS/NZS 3190:2016 AS/NZS 3190:2016
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23464-5 SOUTH AFRICAN NATIONAL STANDARD The use and control of fire-fighting equipment Part 1: Portable and wheeled (mobile) fire extinguishers Published by SABS Standards Division 1 Dr
AS/NZS :2011. Household and similar electrical appliances Safety AS/NZS :2011. Part 1: General requirements
AS/NZS 60335.1:2011 (IEC 60335-1, Ed 5.2:2016, MOD) Incorporating Amendment No. 1, 2, 3 and 4 Australian/New Zealand Standard Household and similar electrical appliances Safety Part 1: General requirements
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32290-8 EN 1176-10:2008 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30561-1 Edition 2 and EN tech. corr. 1 EN 1423:2012 Edition 2 and tech. corr. 1 SOUTH AFRICAN NATIONAL STANDARD Road marking materials Drop on materials Glass beads, antiskid aggregates
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33591-5 EN 12353:2013 SOUTH AFRICAN NATIONAL STANDARD Chemical disinfectants and antiseptics Preservation of test organisms used for the determination of bactericidal (including Legionella),
AS/NZS 3111:2009. Approval and test specification Miniature overcurrent circuitbreakers AS/NZS 3111:2009. Australian/New Zealand Standard
AS/NZS 3111:2009 Incorporating Amendment No. 1 and 2 Australian/New Zealand Standard Approval and test specification Miniature overcurrent circuitbreakers AS/NZS 3111:2009 AS/NZS 3111:2009 This joint Australian/New
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27398-9 Edition 1 EN 14509:2013 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Self-supporting double skin metal faced insulating panels Factory made products Specifications This national standard
AS/NZS 3133:2008 AS/NZS
Incorporating Amendment No. 1 and 2 Australian/New Zealand Standard Approval and test specification Air-break switches Superseding AS/NZS 3133:2008 This joint Australian/New Zealand standard was prepared
AS/NZS 3820:2009 (Incorporating Amendment 1) Essential safety requirements for electrical equipment
AS/NZS 3820:2009 (Incorporating Amendment 1) Essential safety requirements for electrical equipment AS/NZS 3820:2009 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee
AS/NZS 3120:2011. Approval and test specification Cord extension sockets AS/NZS 3120:2011. Australian/New Zealand Standard
AS/NZS 3120:2011 Incorporating Amendment No. 1 Australian/New Zealand Standard Approval and test specification Cord extension sockets AS/NZS 3120:2011 AS/NZS 3120:2011 This Joint Australian/New Zealand
AS/NZS IEC :2016
AS/NZS IEC 60601.2.2:2016 (IEC 60601-2-2, Ed.5.0 (2009) IEC 60601-2-2:2009/COR1:2014, IDT) Australian/New Zealand Standard Medical electrical equipment Part 2.2: Particular requirements for the basic safety
Australian/New Zealand Standard
AS/NZS 3004:2002 AS/NZS 3004 Australian/New Zealand Standard Electrical installations Marinas and pleasure craft at low-voltage AS/NZS 3004:2002 This Joint Australian/New Zealand Standard was prepared
Luminaires Part 2-4: Particular requirements Portable general purpose luminaires
IEC 60598-2-4 Edition 3.0 2017-04 REDLINE VERSION colour inside Luminaires Part 2-4: Particular requirements Portable general purpose luminaires INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.140.40
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-4-41 Fifth edition 2005-12 GROUP SAFETY PUBLICATION Low-voltage electrical installations Part 4-41: Protection for safety This English-language version is derived from
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-4-43 Second edition 2001-08 Electrical installations of buildings Part 4-43: Protection for safety This English-language version is derived from the original bilingual
AS/NZS :2009. Performance of household electrical appliances Refrigerating appliances AS/NZS :2009
AS/NZS 4474.2:2009 (Incorporating Amendment Nos 1 and 2) Australian/New Zealand Standard Performance of household electrical appliances Refrigerating appliances Part 2: Energy labelling and minimum energy
AS/NZS :2015. Conduit systems for cable management AS/NZS :2015. Part 1: General requirements. Australian/New Zealand Standard
AS/NZS 61386.1:2015 Australian/New Zealand Standard Conduit systems for cable management Part 1: General requirements Superseding AS/NZS 2053.1:2001 AS/NZS 61386.1:2015 AS/NZS 61386.1:2015 This joint Australian/New
Substations and high voltage installations exceeding 1 kv a.c.
AS 2067:2016 AS 2067:2016 Substations and high voltage installations exceeding 1 kv a.c. This Australian Standard was prepared by Committee EL-043, High Voltage Installations. It was approved on behalf
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-5-54 Second edition 2002-06 BASIC SAFETY PUBLICATION Electrical installations of buildings Part 5-54: Selection and erection of electrical equipment Earthing arrangements,
Australian/New Zealand Standard
AS/NZS 3760:2003 (Incorporating Amendment No. 1) AS/NZS 3760:2003 Australian/New Zealand Standard In-service safety inspection and testing of electrical equipment AS/NZS 3760:2003 This Joint Australian/New
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-4-44 Edition 1.1 2003-12 Edition 1:2001 consolidated with amendment 1:2003 Electrical installations of buildings Part 4-44: Protection for safety Protection against voltage
AS/NZS :2012. Regulatory compliance mark for electrical and electronic equipment AS/NZS :2012. Part 1: Use of the mark
AS/NZS 4417.1:2012 Appending New Zealand-only Amendment A Australian/New Zealand Standard Regulatory compliance mark for electrical and electronic equipment Part 1: Use of the mark Superseding AS/NZS 4417.1:2009
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-4-41 Fourth edition 2001-08 GROUP SAFETY PUBLICATION Electrical installations of buildings Part 4-41: Protection for safety Protection against electric shock This English-language
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-41 Edition 3.1 2004-03 Edition 3:2002 consolidated with amendment 1:2004 Household and similar electrical appliances Safety Part 2-41: Particular requirements for pumps
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60614-1 Second edition 1994-03 Conduits for electrical installations Specification Part 1: General requirements This English-language version is derived from the original bilingual
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Product Test Centre 15 Progress Road Eastwood Leigh-on-Sea Essex SS9 5JA Contact: Mr S Bailey Tel: +44 (0)1702 425738 E-Mail: stuart.bailey@honeywell.com
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61892-2 Edition 2.0 2012-03 Mobile and fixed offshore units Electrical installations Part 2: System design INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE XC ICS 47.020.60
Household and similar electrical appliances Safety
AS/NZS 60335.2.69:2012 (IEC 60335-2-69 Ed 4, MOD) Australian/New Zealand Standard Household and similar electrical appliances Safety Part 2.69: Particular requirements for wet and dry vacuum cleaners,
AS/NZS :2016
Australian/New Zealand Standard Luminaires Part 2.2: Particular requirements Recessed luminaires Superseding AS/NZS 60598.2.2:2001 AS/NZS 60598.2.2:2016 (IEC 60598-2-2, Ed. 3.0:2011, MOD) Incorporating
Australian Standard. Degrees of protection provided by enclosures (IP Code) AS IEC Ed 2.1:2001 AS 60529
AS 60529 2004 IEC 60529 Ed 2.1:2001 AS 60529 Australian Standard Degrees of protection provided by enclosures (IP Code) This Australian Standard was prepared by Committee EL-026, Protective Enclosures
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62561-1 Edition 1.0 2012-02 Lightning protection system components (LPSC) Part 1: Requirements for connection components INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60950-21 First edition 2002-12 Information technology equipment Safety Part 21: Remote power feeding This English-language version is derived from the original bilingual publication
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-27 Edition 5.0 2009-12 colour inside Household and similar electrical appliances Safety Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60227-1 Edition 2.2 1998-03 Edition 2:1993 consolidated with amendments 1:1995 and 2:1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-13 Edition 6.0 2009-12 Household and similar electrical appliances Safety Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances INTERNATIONAL
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60287-3-1 Edition 1.1 1999-05 Edition 1:1995 consolidated with amendment 1:1999 Electric cables Calculation of the current rating Part 3-1: Sections on operating conditions IEC
This document is a preview generated by EVS
INTERNATIONAL STANDARD IEC 60335-2-98 Edition 2.1 2005-01 Edition 2:2002 consolidated with amendment 1:2004 Household and similar electrical appliances Safety Part 2-98: Particular requirements for humidifiers
Contents The IET Regulations, BS 7671, and this Guide 1.1 The need for this Electrician s Guide 1.2 The IET Regulations BS 7671
Contents 1 The IET Regulations, BS 7671, and this Guide 1 1.1 The need for this Electrician s Guide 1 1.2 The IET Regulations BS 7671 2 1.2.1 International basis 2 1.2.2 The Seventeenth Edition 3 1.2.3
This document is a preview generated by EVS
IEC 61000-6-2 Edition 3.0 2016-08 REDLINE VERSION colour inside Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity standard for industrial environments IEC 61000-6-2:2016-08 RLV(en)
AS/NZS 4012:1999 AS/NZS
Australian/New Zealand Standard AS/NZS 4012:2014 Incorporating Amendment No. 1 Domestic solid fuel burning appliances Method for determination of power output and efficiency Superseding AS/NZS 4012:1999
This is a preview - click here to buy the full publication ICS ISBN
CONSOLIDATED VERSION IEC 60691 Edition 4.1 2019-01 colour inside Thermal-links Requirements and application guide INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.120.50 ISBN 978-2-8322-6430-0 Warning!
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-6 First edition 2006-02 Low-voltage electrical installations Part 6: Verification This English-language version is derived from the original bilingual publication by leaving
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61892-6 First edition 1999-02 Mobile and fixed offshore units Electrical installations Part 6: Installation Unités mobiles et fixes en mer Installations électriques Partie 6:
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61442 Second edition 2005-03 Test methods for accessories for power cables with rated voltages from 6 kv (Um = 7,2 kv) up to 30 kv (Um = 36 kv) This English-language version
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-4-41 Fifth edition 2005-12 GROUP SAFETY PUBLICATION Low-voltage electrical installations Part 4-41: Protection for safety Protection against electric shock This English-language
AS/NZS IEC :2013
AS/NZS IEC 61347.2.13:2013 (IEC 61347-2-13, Ed.1.0 2006, MOD) Australian/New Zealand Standard Lamp controlgear Part 2.13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61000-4-8 Edition1.1 2001-03 Edition 1:1993 consolidated with amendment 1:2000 BASIC EMC PUBLICATION Electromagnetic compatibility (EMC) Part 4-8: Testing and measurement techniques