SOUTH AFRICAN NATIONAL STANDARD
|
|
- Kimberly Phillips
- 5 years ago
- Views:
Transcription
1 ISBN RSR 001:2009 SOUTH AFRICAN NATIONAL STANDARD Railway safety management Part 1: General Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: Fax: s.co.za SABS
2 Table of changes Change No. Date Scope Acknowledgement The SABS Standards Division and the Railway Safety Regulator wish to acknowledge the valuable assistance of the following organizations in the preparation of this document: a) Transnet Limited; b) the Passenger Rail Agency of South Africa (PRASA); c) the Heritage Railway Association of South Africa; d) the Railroad Association of South Africa; e) Standards Australia; f) Transport Canada; and g) Bombela Concession Company (Pty) Ltd. Foreword This South African standard was approved by National Committee SABS TC 1066, National steering committee for railway safety standards, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This document was published in October This document supersedes SANS :2005 (edition 1). SANS 3000 consists of the following parts, under the general title Railway safety management: Part 1: General. Part 2-1: Technical requirements for engineering and operational standards General. Part 2-2: Technical requirements for engineering and operational standards Track, civil and electrical infrastructure. Part 2-3: Technical requirements for engineering and operational standards Rolling stock. Part 2-4: Technical requirements for engineering and operational standards Train authorization and control systems and equipment. (In course of preparation.) Part 2-5: Technical requirements for engineering and operational standards Train operations management. (In course of preparation.) Part 2-6: Technical requirements for engineering and operational standards Interoperability, intermodal and utilities management. (In course of preparation.)
3 Part 3: Railway occurrence management. (In course of preparation.) Part 4: Human factors management. (In course of preparation.) Part 5: Railway stations. (In course of preparation.) Reference is made in 1.3 and to the "relevant national legislation". In South Africa this means the National Railway Safety Regulator Act, 2002 (Act No. 16 of 2002) (as amended from time to time). Reference is made in clause 3, and 8.2 to the "relevant national railway safety legislation". In South Africa this means the National Railway Safety Regulator Act, 2002 (Act No. 16 of 2002) (as amended from time to time), and the Railway Safety Standards Development Regulations. Reference is made in to the "relevant national health and safety legislation". In South Africa this means the Occupational Health and Safety Act, 1993 (Act No. 85 of 1993) (as amended from time to time) and the Mine Health and Safety Act, 1996 (Act No. 29 of 1996) (as amended from time to time). Reference is made in 5.2.2, 5.5.1, 5.5.3, 5.5.7, , 5.8.6, 5.9.1, 6.3.4, 6.4, 7.2.1, 7.6, 8.6, 9.2, , , , , 11.2, 14.1, clause 16 and annex E to the "relevant national railway safety regulator". In South Africa this means the Railway Safety Regulator (RSR). Reference is made in and to the "relevant national legislation". In South Africa this means the National Archives and Record Service of South Africa Act, 1996 (Act No. 43 of 1996). Reference is made in to the "relevant national railway safety regulations". In South Africa this means the Railway Safety Standards Development Regulations. Reference is made in to the "relevant national health and safety legislation". In South Africa this means section 24 of the Occupational Health and Safety Act, 1993 (Act No. 85 of 1993) (as amended from time to time). Reference is made in to the "relevant national authorities". In South Africa this means the South African Police Services (SAPS) (including the Railway Police Division, local SAPS units, and the Government Security Regulator (GSR)), and the Chief Inspector of Explosives (CIE). The previous edition of this document was supplementary to the Railway Safety Management Regulations of 2004, which were developed in accordance with the National Railway Safety Regulator Act, 2002 (Act No. 16 of 2002) (as amended from time to time). This edition has been developed in accordance with the National Railway Safety Regulator Amendment Act, 2008 (Act No. 69 of 2008), which repealed the Regulations of Annexes D and E form an integral part of this document. Annexes A, B and C are for information only. Introduction This document has been developed primarily with a view to achieving uniformity in the management of railway safety both as a general principle and with specific reference to the issuing of safety permits to railway operators. Key to railway safety management is an appropriate risk management system that aims to ensure that railway operators identify their technical and operational hazards and manage the resultant risks to people, property and the environment to a level that is as low as is reasonably practicable. 1
4 This approach recognizes that, while there is an ideal level of safety, the costs of achieving this ideal might far outweigh the benefits and limit the viability of railway operations. However, it is understood that railway operators protect their commercial and social responsibilities by running safe railways. Railway safety has a relationship with workplace health and safety, and with security, both of which are governed by specific legislation. The safety management system is required to take into account the impact of occupational health and safety issues as well as security matters on railway operational safety. This document outlines a common approach to the management of the interfaces between operators and intrafaces within an operator s activities, which are crucial for ensuring the safety of railway operations. Different categories and types of safety permit may not require all the elements described in this document to be complied with. The Railway Safety Regulator will inform operators which elements are applicable to the category and type of safety permit that they desire. 2
5 Contents Page Acknowledgement Foreword Introduction 1 Scope Normative references Definitions and abbreviations Safety management system (SMS) Policy, structure and procedure Operator s safety policy Nominated manager Authority and responsibilities of the operator Involvement of employees and their representative structures Annual safety improvement plan Safety audits Compliance with safety legislation Document and data control SMS review Operational risk management processes General The risk management process Operational risk assessment processes Operational risk controls Occurrence management Occurrence management processes Railway occurrence categories Categories of immediate causes Human factor root (basic) cause Fatalities and injuries Railway occurrence recording, notification and reporting to the relevant national railway safety regulator (see foreword) Occurrence investigations Corrective action plans Security management General Security incidents categories Security incident recording, notification and reporting Information to be submitted Quarterly reports Annual safety improvement plans
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30262-7 SOUTH AFRICAN NATIONAL STANDARD The installation, inspection and maintenance of equipment used in explosive atmospheres Part 1: Installations including surface installations on mines
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22437-0 Any reference to SABS 0114-2 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Interior lighting Part 2:
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30385-3 SOUTH AFRICAN NATIONAL STANDARD The installation, maintenance, repair and replacement of domestic solar water heating systems WARNING This document references other documents normatively.
More informationSOUTH AFRICAN NATIONAL STANDARD
ICS 13.220.01 ISBN 0-626-14666-6 SOUTH AFRICAN NATIONAL STANDARD Community protection against fire Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26992-0 SOUTH AFRICAN NATIONAL STANDARD Fire detection and alarm systems for buildings System design, installation and servicing Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27010-0 SOUTH AFRICAN NATIONAL STANDARD Protection against lightning Physical damage to structures and life hazard WARNING Can only be used in conjunction with the SANS 62305 series. Published
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23127-9 SOUTH AFRICAN NATIONAL STANDARD Portable refillable fire extinguishers Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31129-2 SOUTH AFRICAN NATIONAL STANDARD Symbolic safety signs Part 1: Standard signs and general requirements WARNING This document references other documents normatively. Published by SABS
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29493-9 Any reference to SABS 0222-5-1-3 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Electrical security
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30910-7 SOUTH AFRICAN NATIONAL STANDARD Electrical security systems Part 2-2: Access control systems Central processor WARNING This document references other documents normatively. Published
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31262-6 SOUTH AFRICAN NATIONAL STANDARD Olive oils and olive-pomace oils Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-2-31560-3 SOUTH AFRICAN NATIONAL STANDARD Electric cables for motor vehicles Ignition cables for motor vehicles Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32798-9 SOUTH AFRICAN NATIONAL STANDARD Gas measuring equipment primarily for use in mines Part 5: Fire detectors WARNING This standard references other documents normatively. Published
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28120-5 SOUTH AFRICAN NATIONAL STANDARD Low-foam laundry detergent (for use in automatic and non-automatic domestic washing machines) Published by SABS Standards Division 1 Dr Lategan Road
More informationSANS :2012 Edition 1.8
ISBN 978-0-626-26767-4 SOUTH AFRICAN NATIONAL STANDARD The wiring of premises Part 1: Low-voltage installations Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25781-1 IEC 61010-1:2010 SOUTH AFRICAN NATIONAL STANDARD Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements This national
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33970-8 SOUTH AFRICAN NATIONAL STANDARD Electric flexible cables with solid extruded dielectric insulation Part 4: Rubber-insulated cables for domestic, office and similar environments (cords)
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23465-2 SOUTH AFRICAN NATIONAL STANDARD The use and control of fire-fighting equipment Part 2: Fire hose reels and above-ground hydrants Amdt 1 Published by SABS Standards Division 1 Dr
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31263-3 SOUTH AFRICAN NATIONAL STANDARD Disposable portable condensed aerosol fire extinguishers WARNING This document references other documents normatively. Published by SABS Standards
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26239-6 SOUTH AFRICAN NATIONAL STANDARD Design, selection and installation of geomembranes Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28409-1 Edition 2.1 IEC 60730-2-9:2011 Edition 3.1 SOUTH AFRICAN NATIONAL STANDARD Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34241-8 SOUTH AFRICAN NATIONAL STANDARD Industrial body belts Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax: +27
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27031-5 Edition 4.2 IEC 60238:2011 Edition 8.2 SOUTH AFRICAN NATIONAL STANDARD Edison screw lampholders This national standard is the identical implementation of IEC 60238:2011 and is adopted
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21896-6 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Medical gas pipeline systems Part 1: Pipeline systems for compressed medical gases and vacuum This national standard is a modified adoption
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28897-6 IEC 61869-1:2007 SOUTH AFRICAN NATIONAL STANDARD Instrument transformers Part 1: General requirements This national standard is the identical implementation of IEC 61869-1:2007 and
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28655-2 Edition 1 and nat. amdt 1 ISO 7866:1999 Edition 1 Any reference to SABS ISO 7866 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH
More informationLicensed exclusively to SABS. Copying and network storage prohibited.
ICS 29.240.20 ISBN 0-626-10879-9 SABS 0198-14* *This standard references other standards Edition 2 1996 SOUTH AFRICAN STANDARD Code of practice The selection, handling and installation of electric power
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25898-6 IEC 61400-25-6:2010 SOUTH AFRICAN NATIONAL STANDARD Wind turbines Part 25-6: Communications for monitoring and control of wind power plants Logical node classes and data classes
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21598-9 ISO 14520-1:2006 SOUTH AFRICAN NATIONAL STANDARD Gaseous fire-extinguishing systems Physical properties and system design Part 1: General requirements This national standard is the
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-36792-3 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Methods of test for assessment of the fire integrity of electric cables Part 2: Test for unprotected small cables for use in emergency circuits
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22857-6 SOUTH AFRICAN NATIONAL STANDARD Eye-protectors for industrial and non-industrial use Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30971-8 SOUTH AFRICAN NATIONAL STANDARD Information technology equipment Safety Part 1: General requirements This national standard is the identical implementation of, and is adopted with
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33724-7 IEC 60364-7-712:2002 SOUTH AFRICAN NATIONAL STANDARD Electrical installations of buildings Part 7-712: Requirements for special installations or locations Solar photovoltaic (PV)
More informationSANS 21-1:2009 Edition 1 EN 115-1:2008
ISBN 978-0-626-22589-6 EN 115-1:2008 SOUTH AFRICAN NATIONAL STANDARD Safety of escalators and moving walks Part 1: Construction and installation This national standard is the identical implementation of
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24110-0 SANS 50354:2003 EN 354:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Lanyards This national standard is the identical implementation
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34222-7 IEC 61558-2-9:2010 SOUTH AFRICAN NATIONAL STANDARD Safety of transformers, reactors, power supply units and combinations thereof Part 2-9: Particular requirements and tests for transformers
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30618-2 ISO 80601-2-61:2011 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23963-3 SANS 50353-1:2003 EN 353-1:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Guided type fall arresters including a rigid anchor line
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29193-8 Edition 1.2 IEC 60432-1:2012 Edition 2.2 SOUTH AFRICAN NATIONAL STANDARD Incandescent lamps Safety specifications Part 1: Tungsten filament lamps for domestic and similar general
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32266-3 Edition 3.2 IEC 60335-2-29:2010 Edition 4.2 SOUTH AFRICAN NATIONAL STANDARD Household and similar electrical appliances Safety Part 2-29: Particular requirements for battery chargers
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28010-9 Edition 1 and nat. amdt 1 ISO 3743-2:1994 Edition 1 Any reference to SABS ISO 3743-2 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002)
More informationSANS :2014 Edition 1 IEC :2012 Edition 1
ISBN 978-0-626-29479-3 IEC 60601-2-66:2012 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments
More informationSOUTH AFRICAN NATIONAL STANDARD. Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
ISBN 978-0-626-33793-3 Edition 1.1 IEC 60601-2-19:2016 Edition 2.1 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-19: Particular requirements for the basic safety essential performance
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32289-2 Edition 1 EN 1176-7:2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34367-5 Edition 1 (incorporating EN amdt 1, EN corr. 1) EN 1492-1:2000 Edition 1 (incorporating amdt 1, corr. 1) SOUTH AFRICAN NATIONAL STANDARD Textile slings Safety Part 1: Flat woven
More informationSOUTH AFRICAN NATIONAL STANDARD
Copying and network storage prohibited. ISBN 978-0-626-32227-4 SANS 60947-5-6:1999 Edition 1 and nat. amdt 1 IEC 60947-5-6:1999 Edition 1 Any reference to SABS IEC 60947-5-6 is deemed to be a reference
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28875-4 Edition 1.2 IEC 60227-5:2003 SOUTH AFRICAN NATIONAL STANDARD Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 5: Flexible cables (cords) This
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27398-9 Edition 1 EN 14509:2013 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Self-supporting double skin metal faced insulating panels Factory made products Specifications This national standard
More informationSANS :2014 Edition 1 IEC :2012 Edition 1
ISBN 978-0-626-29823-4 IEC 60601-2-65:2012 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28516-6 IEC 62053-11:2003 SOUTH AFRICAN NATIONAL STANDARD Electricity metering equipment (a.c.) Particular requirements Part 11: Electromechanical meters for active energy (classes 0,5,
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32290-8 EN 1176-10:2008 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23464-5 SOUTH AFRICAN NATIONAL STANDARD The use and control of fire-fighting equipment Part 1: Portable and wheeled (mobile) fire extinguishers Published by SABS Standards Division 1 Dr
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32335-6 Edition 1 (incorporating EN amdt 1) EN 13795:2011 Edition 2 (incorporating amdt 1) SOUTH AFRICAN NATIONAL STANDARD Surgical drapes, gowns and clean air suits, used as medical devices
More informationAS/NZS IEC :2015
AS/NZS IEC 60947.5.6:2015 (IEC 60947-5-6, Ed. 1.0:1999, IDT) Australian/New Zealand Standard Low-voltage switchgear and Part 5.6: Control circuit devices and switching elements DC interface for proximity
More informationSubstations and high voltage installations exceeding 1 kv a.c.
AS 2067:2016 AS 2067:2016 Substations and high voltage installations exceeding 1 kv a.c. This Australian Standard was prepared by Committee EL-043, High Voltage Installations. It was approved on behalf
More informationCOMMISSION IMPLEMENTING REGULATION (EU) /... of XXX. on the European Rail Traffic Management System European deployment plan
EUROPEAN COMMISSION Brussels, XXX [ ](2016) XXX draft COMMISSION IMPLEMENTING REGULATION (EU) /... of XXX on the European Rail Traffic Management System European deployment plan EN EN COMMISSION IMPLEMENTING
More informationFire detection and alarm systems. Part 4: Power supply equipment (ISO :2003, MOD) AS (Incorporating Amendment No.
AS 7240.4 2004 (Incorporating Amendment No. 1) AS 7240.4 2004 Fire detection and alarm systems Part 4: Power supply equipment (ISO 7240-4:2003, MOD) This Australian Standard was prepared by Committee FP-002,
More informationThis is a preview - click here to buy the full publication
TECHNICAL REPORT IEC/TR 62351-10 Edition 1.0 2012-10 colour inside Power systems management and associated information exchange Data and communications security Part 10: Security architecture guidelines
More informationAustralian/New Zealand Standard
AS/NZS 1680.5:2012 AS/NZS 1680.5:2012 Australian/New Zealand Standard Interior and workplace lighting Part 5: Outdoor workplace lighting AS/NZS 1680.5:2012 This Joint Australian/New Zealand Standard was
More informationAS/NZS 3820:2009 (Incorporating Amendment 1) Essential safety requirements for electrical equipment
AS/NZS 3820:2009 (Incorporating Amendment 1) Essential safety requirements for electrical equipment AS/NZS 3820:2009 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33591-5 EN 12353:2013 SOUTH AFRICAN NATIONAL STANDARD Chemical disinfectants and antiseptics Preservation of test organisms used for the determination of bactericidal (including Legionella),
More informationAustralian Standard. Smoke alarms. AS (Incorporating Amendment Nos 1, 2, 3 and 4) AS 3786
AS 3786 1993 (Incorporating Amendment Nos 1, 2, 3 and 4) AS 3786 Australian Standard Smoke alarms This Australian Standard was prepared by Committee FP-002, Automatic Fire Detection and Alarm Systems.
More informationAS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016. Part 3: Installation site
Australian/New Zealand Standard (ISO 5149-3:2014, MOD) Refrigerating systems and heat pumps Safety and environmental requirements Part 3: Installation site Superseding in part AS/NZS 1677.2:1998 This joint
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30561-1 Edition 2 and EN tech. corr. 1 EN 1423:2012 Edition 2 and tech. corr. 1 SOUTH AFRICAN NATIONAL STANDARD Road marking materials Drop on materials Glass beads, antiskid aggregates
More informationAS/NZS :2011. Household and similar electrical appliances Safety AS/NZS :2011. Part 1: General requirements
AS/NZS 60335.1:2011 (IEC 60335-1, Ed 5.2:2016, MOD) Incorporating Amendment No. 1, 2, 3 and 4 Australian/New Zealand Standard Household and similar electrical appliances Safety Part 1: General requirements
More informationHousehold and similar electrical appliances Safety
AS/NZS 60335.2.69:2012 (IEC 60335-2-69 Ed 4, MOD) Australian/New Zealand Standard Household and similar electrical appliances Safety Part 2.69: Particular requirements for wet and dry vacuum cleaners,
More informationAustralian Standard. Closed circuit television (CCTV) Part 4: Remote video AS AS
AS 4806.4 2008 AS 4806.4 2008 Australian Standard Closed circuit television (CCTV) Part 4: Remote video This Australian Standard was prepared by Committee EL-051, Non-Broadcast Television. It was approved
More informationElectrical Safety Policy and Management System
TITLE: PAGE: 1 OF 14 Housing Solutions Limited Electrical Safety Policy and Management System Page 1 of 15 TITLE: PAGE: 2 OF 14 FOREWORD This document details the system for the management of electrical
More informationTable of Contents FOREWORD... 3 INTRODUCTION SCOPE NORMATIVE REFERENCES DEFINITIONS AND ABBREVIATIONS REQUIREMENTS...
TITLE SPECIFICATION FOR PHOTOELECTRIC CONTROL UNITS (PECUs) REFERENCE REV DATE: JUNE 2017 PAGE: 1 OF 16 REVISION DATE: Table of Contents FOREWORD... 3 INTRODUCTION... 4 1 SCOPE... 4 2 NORMATIVE REFERENCES...
More informationAS/NZS :2014. Electrical equipment for coal mines Introduction, inspection and maintenance AS/NZS :2014. Part 1: For hazardous areas
AS/NZS 2290.1:2014 Australian/New Zealand Standard Electrical equipment for coal mines Introduction, inspection and maintenance Part 1: For hazardous areas Superseding AS/NZS 2290.1:2005 AS/NZS 2290.1:2014
More informationNZS 7901:2014. Electricity and gas industries Safety management systems for public safety NZS 7901:2014. New Zealand Standard
NZS 7901:2014 New Zealand Standard Electricity and gas industries Safety management systems for public safety Superseding NZS 7901:2008 NZS 7901:2014 COMMITTEE REPRESENTATION This standard was prepared
More informationAustralian Standard. Degrees of protection provided by enclosures (IP Code) AS IEC Ed 2.1:2001 AS 60529
AS 60529 2004 IEC 60529 Ed 2.1:2001 AS 60529 Australian Standard Degrees of protection provided by enclosures (IP Code) This Australian Standard was prepared by Committee EL-026, Protective Enclosures
More informationAS/NZS :2014
(ISO 13857:2008, IDT) Australian/New Zealand Standard Safety of machinery Part 1801: Safety distances to prevent danger zones being reached by upper and lower limbs AS/NZS 4024.1801:2014 This joint Australian/New
More informationAustralian Standard. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 0: Functional safety and AS 61508
AS 61508.0 2006 IEC/TR 61508-0:2005 AS 61508.0 2006 Australian Standard Functional safety of Part 0: Functional safety and AS 61508 This Australian Standard was prepared by Committee IT-006, Industrial
More informationAS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016
Australian/New Zealand Standard AS/NZS 5149.1:2016 (ISO 5149-1:2014, MOD) Incorporating Amendment No. 1 Refrigerating systems and heat pumps Safety and environmental requirements Part 1: Definitions, classification
More informationAS/NZS :2014
Australian/New Zealand Standard Safety of machinery AS/NZS 4024.1905:2014 (IEC 61310-2, Ed. 2.0 (2007), IDT) Part 1905: Displays, controls, actuators and signals Indication, marking and actuation Requirements
More informationAS AS Australian Standard. Potting mixes. This is a free 7 page sample. Access the full version online.
AS 3743 2003 AS 3743 Australian Standard Potting mixes This Australian Standard was prepared by Committee CS-037, Garden Soils and Potting Mixes. It was approved on behalf of the Council of Standards Australia
More informationSummary of changes between PD 6662:2010 and PD 6662:2017 a guide
Summary of changes between PD 6662:2010 and PD 6662:2017 a guide October 2017 For other information please contact: British Security Industry Association t: 01905 342 020 e: info@bsia.co.uk www.bsia.co.uk
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-19281-5 SOUTH AFRICAN NATIONAL STANDARD Fire detection and alarm systems for buildings System design, installation and servicing Published by Standards South Africa 1 dr lategan road groenkloof
More informationAustralian/New Zealand Standard
AS/NZS 2243.5 Australian/New Zealand Standard Safety in laboratories Part 5: Non-ionizing radiations Electromagnetic, sound and ultrasound This Joint Australian/New Zealand Standard was prepared by Joint
More information1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres?
QUESTIONS TO REGULATORS 1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres? Note: This answer only relates to coal mining in the state of New South
More informationAustralian/New Zealand Standard
AS/NZS 1338.1:2012 AS/NZS 1338.1:2012 Australian/New Zealand Standard Filters for eye protectors Part 1: Filters for protection against radiation generated in welding and allied operations AS/NZS 1338.1:2012
More informationAS/NZS 3111:2009. Approval and test specification Miniature overcurrent circuitbreakers AS/NZS 3111:2009. Australian/New Zealand Standard
AS/NZS 3111:2009 Incorporating Amendment No. 1 and 2 Australian/New Zealand Standard Approval and test specification Miniature overcurrent circuitbreakers AS/NZS 3111:2009 AS/NZS 3111:2009 This joint Australian/New
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60115-8 Edition 2.0 2009-01 Fixed resistors for use in electronic equipment Part 8: Sectional specification Fixed surface mount resistors INTERNATIONAL ELECTROTECHNICAL COMMISSION
More informationAS/NZS 4745:2012. Code of practice for handling combustible dusts AS/NZS 4745:2012. Australian/New Zealand Standard. Superseding AS/NZS 4745:2004
AS/NZS 4745:2012 (Incorporating Amendment No. 1) Australian/New Zealand Standard Code of practice for handling combustible dusts Superseding AS/NZS 4745:2004 AS/NZS 4745:2012 AS/NZS 4745:2012 This Joint
More informationAS/NZS :1998 AS/NZS ISO
(ISO 817:2014, IDT) Australian/New Zealand Standard Refrigerants Designation and safety classification Superseding AS/NZS 1677.1:1998 AS/NZS ISO 817:2016 This joint Australian/New Zealand standard was
More informationAustralian Standard. Emergency escape lighting and exit signs for buildings. Part 1: System design, installation and operation AS 2293.
AS 2293.1 2005 AS 2293.1 2005 Australian Standard Emergency escape lighting and exit signs for buildings Part 1: System design, installation and operation This Australian Standard was prepared by Committee
More informationAustralian Standard. Fire protection for mobile and transportable equipment AS AS
AS 5062 2006 AS 5062 2006 Australian Standard Fire protection for mobile and transportable equipment This Australian Standard was prepared by Committee FP-022, Fire Protection of Mobile Transportable Equipment.
More informationAS/NZS :2009
Australian/New Zealand Standard AS/NZS 61558.2.6:2009 Incorporating Amendment No. 1 (IEC 61558-2-6 Ed 2, MOD) Safety of transformers, reactors, power supply units and similar products for supply voltages
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-4-42 Second edition 2001-08 Electrical installations of buildings Part 4-42: Protection for safety This English-language version is derived from the original bilingual
More informationAS/NZS 3133:2008 AS/NZS
Incorporating Amendment No. 1 and 2 Australian/New Zealand Standard Approval and test specification Air-break switches Superseding AS/NZS 3133:2008 This joint Australian/New Zealand standard was prepared
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60730-2-13 Edition 3.0 2017-10 Automatic electrical controls INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 97.120 ISBN 978-2-8322-4900-0 Warning! Make sure that you obtained
More informationAS/NZS :2009. Performance of household electrical appliances Refrigerating appliances AS/NZS :2009
AS/NZS 4474.2:2009 (Incorporating Amendment Nos 1 and 2) Australian/New Zealand Standard Performance of household electrical appliances Refrigerating appliances Part 2: Energy labelling and minimum energy
More informationAS/NZS TR IEC :2012
AS/NZS TR IEC 61000.3.7:2012 IEC TR 61000-3-7, Ed.2.0 (2008) Technical Report Electromagnetic compatibility (EMC) Part 3.7: Limits Assessment of emission limits for the connection of fluctuating installations
More informationAustralian/New Zealand Standard
AS/NZS 3004:2002 AS/NZS 3004 Australian/New Zealand Standard Electrical installations Marinas and pleasure craft at low-voltage AS/NZS 3004:2002 This Joint Australian/New Zealand Standard was prepared
More informationAS/NZS 3957:2006 AS/NZS
AS/NZS 3957:2014 Australian/New Zealand Standard Light-transmitting screens and curtains for welding operations Superseding AS/NZS 3957:2006 AS/NZS 3957:2014 AS/NZS 3957:2014 This joint Australian/New
More informationAustralian/New Zealand Standard
AS/NZS 3760:2003 (Incorporating Amendment No. 1) AS/NZS 3760:2003 Australian/New Zealand Standard In-service safety inspection and testing of electrical equipment AS/NZS 3760:2003 This Joint Australian/New
More informationAustralian/New Zealand Standard
AS/NZS 3666.2:2011 AS/NZS 3666.2:2011 Australian/New Zealand Standard Air-handling and water systems of buildings Microbial control Part 2: Operation and maintenance AS/NZS 3666.2:2011 This Joint Australian/New
More informationFact File 48 Guide to BS EN 54-13:2017 Fire Detection and alarm systems:
Fact File 48 Guide to BS EN 54-13:2017 Fire Detection and alarm systems: Compatibility and connectivity assessment of system components Guide to BS EN 54-13:2017 Fire Detection and alarm systems: Compatibility
More information